IRM3-MIB
250 objects
No module-level DESCRIPTION found.
Imported Objects
| IRM-OIDS | repeaterRev1 repeaterRev2 subSysMMAC |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter NetworkAddress |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.1.2.1.1 | Nodedevice | |||
| 1.3.6.1.4.1.52.1.2.1.1.2 | ScalardeviceMMACType | read-only | mandatory | Indicates the type of MMAC. |
| 1.3.6.1.4.1.52.1.2.1.1.3 | ScalardeviceSlots | read-only | mandatory | Number of available device slots in this device, including the IRM slot. |
| 1.3.6.1.4.1.52.1.2.1.1.4 | ScalardeviceOccupiedSlots | read-only | mandatory | The slots that contain MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 3 indicates that there a… |
| 1.3.6.1.4.1.52.1.2.1.1.5 | ScalardevicePortsOn | read-only | mandatory | The number of operating ports on the device. |
| 1.3.6.1.4.1.52.1.2.1.1.6 | ScalardeviceTotalPorts | read-only | mandatory | The total number of repeater ports on the MMAC. |
| 1.3.6.1.4.1.52.1.2.1.1.7 | ScalardeviceTotalPkts | read-only | mandatory | The number of packets detected on all ports of this device. |
| 1.3.6.1.4.1.52.1.2.1.1.8 | ScalardeviceTotalErrors | read-only | mandatory | The sum of all of the errors listed including alignment, CRC, runts, giants, and out of window collisions. |
| 1.3.6.1.4.1.52.1.2.1.1.9 | ScalardeviceTransmitColls | read-only | mandatory | The number of transmit collisions detected by this MMAC. |
| 1.3.6.1.4.1.52.1.2.1.1.10 | ScalardeviceRecColls | read-only | mandatory | The number of receive collisions detected by this MMAC. |
| 1.3.6.1.4.1.52.1.2.1.1.11 | ScalardeviceAlignErrs | read-only | mandatory | The number of packets with alignment errors detected. |
| 1.3.6.1.4.1.52.1.2.1.1.12 | ScalardeviceCRCErrs | read-only | mandatory | The number of packets with bad CRC detected. |
| 1.3.6.1.4.1.52.1.2.1.1.13 | ScalardeviceRunts | read-only | mandatory | The number of runt frames detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.14 | ScalardeviceOOWColls | read-only | mandatory | The number of out-of-window collisions detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.15 | ScalardeviceNoResources | read-only | mandatory | The number of No resource condtions detected by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.16 | ScalardeviceRecBytes | read-only | mandatory | The number of bytes detected on the network. |
| 1.3.6.1.4.1.52.1.2.1.1.17 | ScalardeviceGiantFrames | read-only | mandatory | The number of packets longer than 1518 bytes. |
| 1.3.6.1.4.1.52.1.2.1.1.18 | ScalardeviceRestart | read-write | mandatory | If this object is set to 1 the device is restarted. |
| 1.3.6.1.4.1.52.1.2.1.1.19 | ScalardeviceResetCounters | read-write | mandatory | If this object is set to 1, all of the devices counters are reset to 0. |
| 1.3.6.1.4.1.52.1.2.1.1.20 | ScalardeviceRedundantCts | read-only | mandatory | The number of redundant circuits available for use. |
| 1.3.6.1.4.1.52.1.2.1.1.21 | ScalardeviceDiscover | read-write | deprecated | When this variable is set to 1 The following events occur: (1) The device sends a LINK-UP trap (2) The device sends a proprietary packet that will cause all ot… |
| 1.3.6.1.4.1.52.1.2.1.1.24 | ScalardeviceTimeBase | read-write | mandatory | The number of seconds used as the interval for performing all of the rate alarm checks. The minimum is 10 secs. |
| 1.3.6.1.4.1.52.1.2.1.1.25 | ScalardeviceResetRedundancy | read-write | mandatory | Setting this object to a 1 will reset redundancy for the entire box. |
| 1.3.6.1.4.1.52.1.2.1.1.26 | ScalardeviceSrcAddrAgingTime | read-write | mandatory | The number of minutes that a source address is not detected before it is removed from the source address table. |
| 1.3.6.1.4.1.52.1.2.1.1.27 | ScalardeviceSrcAddrTraps | read-write | mandatory | Controls sending of source address related traps. |
| 1.3.6.1.4.1.52.1.2.1.1.28 | ScalardeviceSrcAddrLocked | read-write | mandatory | If this is set to 2, any source addresses that are detected on station ports that are not in the table will cause the port to be turned off. |
| 1.3.6.1.4.1.52.1.2.1.1.29 | ScalardeviceEtherOccupiedSlots | read-only | mandatory | The slots that contain Ethernet MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 2 indicates tha… |
| 1.3.6.1.4.1.52.1.2.1.1.30 | ScalardeviceTROccupiedSlots | read-only | mandatory | The slots that contain managable Token Ring MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 2 i… |
| 1.3.6.1.4.1.52.1.2.1.1.31 | ScalardeviceFDDIOccupiedSlots | read-only | mandatory | The slots that contain FDDI MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 2 indicates that th… |
| 1.3.6.1.4.1.52.1.2.1.1.32 | ScalardeviceRestoreDefaults | read-write | mandatory | If this object is set to 1 the factory defaults are restored. This, however, does not affect the device's IP address. |
| 1.3.6.1.4.1.52.1.2.1.1.33 | ScalardeviceActiveUsers | read-only | mandatory | The number of active users seen by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.34 | ScalardeviceOSIFrames | read-only | mandatory | The number of frames with OSI protocol seen by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.35 | ScalardeviceNovellFrames | read-only | mandatory | The number of frames with NOVELL protocol seen by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.36 | ScalardeviceBanyanFrames | read-only | mandatory | The number of frames with BANYAN protocol seen by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.37 | ScalardeviceDECNetFrames | read-only | mandatory | The number of frames with DECNET protocol seen by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.38 | ScalardeviceXNSFrames | read-only | mandatory | The number of frames with XNS protocol seen by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.39 | ScalardeviceIPFrames | read-only | mandatory | The number of frames with TCPIP protocol seen by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.40 | ScalardeviceCtronFrames | read-only | mandatory | The number of frames with Cabletron protocol seen by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.41 | ScalardeviceAppletalkFrames | read-only | mandatory | The number of frames with Appletalk protocol seen by this device. |
| 1.3.6.1.4.1.52.1.2.1.1.42 | ScalardeviceOtherFrames | read-only | mandatory | The number of frames seen by this device, that do not fall into any of the previously listed protocol catagories. |
| 1.3.6.1.4.1.52.1.2.1.1.43 | Scalardevice64To127Frames | read-only | mandatory | The number of frames seen by this device, with frame sizes between 64 and 127 bytes. |
| 1.3.6.1.4.1.52.1.2.1.1.44 | Scalardevice128To255Frames | read-only | mandatory | The number of frames seen by this device, with frame sizes between 128 and 255 bytes. |
| 1.3.6.1.4.1.52.1.2.1.1.45 | Scalardevice256To511Frames | read-only | mandatory | The number of frames seen by this device, with frame sizes between 256 and 511 bytes. |
| 1.3.6.1.4.1.52.1.2.1.1.46 | Scalardevice512To1023Frames | read-only | mandatory | The number of frames seen by this device, with frame sizes between 512 and 1023 bytes. |
| 1.3.6.1.4.1.52.1.2.1.1.47 | Scalardevice1024To1518Frames | read-only | mandatory | The number of frames seen by this device, with frame sizes between 1024 and 1518 bytes. |
| 1.3.6.1.4.1.52.1.2.1.1.48 | ScalardeviceBroadPkts | read-only | mandatory | The sum of broadcast packets detected on all ports of this device. |
| 1.3.6.1.4.1.52.1.2.1.1.49 | ScalardeviceMultPkts | read-only | mandatory | The sum of multicast packets detected on all ports of this device. |
| 1.3.6.1.4.1.52.1.2.1.1.51 | ScalardeviceThdPartyOccupiedSlots | read-only | mandatory | The slots that contain Third Party MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 2 indicates … |
| 1.3.6.1.4.1.52.1.2.1.1.52 | ScalardeviceImimOccupiedSlots | read-only | mandatory | The slots that contain Cabletron Intelligent MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 2 … |
| 1.3.6.1.4.1.52.1.2.1.1.54 | ScalardeviceLinkTraps | read-write | mandatory | Controls sending of link related traps. |
| 1.3.6.1.4.1.52.1.2.1.1.56 | ScalarctIPDefaultFrameType | read-write | mandatory | Defines the default frame type that will be used by the device. A device will understand both frame types and will respond based upon the framing type that is … |
| 1.3.6.1.4.1.52.1.2.1.1.57 | ScalardeviceSrcAddrType | read-write | mandatory | Selects the hashing algorithm of source addresses, DEC or IP |
| 1.3.6.1.4.1.52.1.2.1.2 | Nodeboard | |||
| 1.3.6.1.4.1.52.1.2.1.3 | Nodeport | |||
| 1.3.6.1.4.1.52.1.2.1.7 | NodesourceAddr | |||
| 1.3.6.1.4.1.52.1.2.1.7.1 | ScalarsourceAddrBoard | read-only | mandatory | The board number of the port that the supplied source address has been found on. |
| 1.3.6.1.4.1.52.1.2.1.7.2 | ScalarsourceAddrPort | read-only | mandatory | The port number of the port that the supplied source address has been found on. |
| 1.3.6.1.4.1.52.1.2.1.8 | Noderedundancy | |||
| 1.3.6.1.4.1.52.1.2.1.8.1 | ScalarredundancyPollInterval | read-write | mandatory | The number of seconds between polls for redundancy. |
| 1.3.6.1.4.1.52.1.2.1.8.2 | ScalarredundancyTestTod | read-write | mandatory | The time of day at which the redundant circuits should be tested. |
| 1.3.6.1.4.1.52.1.2.1.8.3 | ScalarredundancyPerformTest | read-write | mandatory | Test the redundant circuit. |
| 1.3.6.1.4.1.52.1.2.1.8.4 | ScalarredundancyCircuitName | read-write | mandatory | The name of the indicated circuit. |
| 1.3.6.1.4.1.52.1.2.1.8.5 | ScalarredundancyRetryCount | read-write | mandatory | The number of unanswered polls allowed for the indicated circuit before the current connection is declared bad. |
| 1.3.6.1.4.1.52.1.2.1.8.6 | ScalarredundancyNumBPs | read-only | mandatory | The number of board/port combinations associated with the indicated circuit. |
| 1.3.6.1.4.1.52.1.2.1.8.7 | ScalarredundancyCircuitBoard | read-only | mandatory | The boards associated with the indicated circuit. |
| 1.3.6.1.4.1.52.1.2.1.8.8 | ScalarredundancyCircuitPort | read-only | mandatory | The ports associated with the indicated circuit. |
| 1.3.6.1.4.1.52.1.2.1.8.9 | ScalarredundancyCircuitTypes | read-only | mandatory | The type of each port associated with the indicated circuit. |
| 1.3.6.1.4.1.52.1.2.1.8.10 | ScalarredundancyCircuitNumAddr | read-only | mandatory | The number of addresses associated with the indicated circuit. |
| 1.3.6.1.4.1.52.1.2.1.8.11 | ScalarredundancyCircuitMACAddrAdd | read-write | mandatory | Adds this ethernet address to the polling list for the indicated circuit. |
| 1.3.6.1.4.1.52.1.2.1.8.12 | ScalarredundancyCircuitMACAddrDel | read-write | mandatory | Removes this ethernet address from the polling list for the indicated circuit. |
| 1.3.6.1.4.1.52.1.2.1.8.13 | ScalarredundancyCircuitMACAddrDisp | read-only | mandatory | The ethernet addresses associated with the indicated circuit, accessed by index. |
| 1.3.6.1.4.1.52.1.2.1.8.14 | ScalarredundancyCircuitEnable | read-write | mandatory | Enables and disables the indicated circuit. |
| 1.3.6.1.4.1.52.1.2.1.8.15 | ScalarredundancyCircuitReset | read-write | mandatory | Reset the indicated circuit. Return all of the associated board and ports to NOT-USED, remove associated addresses from the polling list, reset the circuit nam… |
| 1.3.6.1.4.1.52.1.2.1.9 | Nodealarm | |||
| 1.3.6.1.4.1.52.1.2.1.9.1 | NodedevAlrm | |||
| 1.3.6.1.4.1.52.1.2.1.9.1.1 | NodedevTraffic | |||
| 1.3.6.1.4.1.52.1.2.1.9.1.1.1 | ScalardevTrafficEnable | read-write | mandatory | Enable the sending of device level traffic traps. |
| 1.3.6.1.4.1.52.1.2.1.9.1.1.2 | ScalardevTrafficThreshold | read-write | mandatory | The threshold of packets within the Devicetimebase that will cause a traffic alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.1.2 | NodedevColls | |||
| 1.3.6.1.4.1.52.1.2.1.9.1.2.1 | ScalardevCollsEnable | read-write | mandatory | Enable the sending of device level collision alarms. |
| 1.3.6.1.4.1.52.1.2.1.9.1.2.2 | ScalardevCollsThreshold | read-write | mandatory | This object represents the number of collisions per good packet measured by the device that will generate an alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.1.3 | NodedevError | |||
| 1.3.6.1.4.1.52.1.2.1.9.1.3.1 | ScalardevErrorEnable | read-write | mandatory | Enable the sending of device level error alarms. |
| 1.3.6.1.4.1.52.1.2.1.9.1.3.2 | ScalardevErrorThreshold | read-write | mandatory | This object represents the percentage of errors per good packet that will generate an alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.1.3.3 | ScalardevErrorSource | read-write | mandatory | The type of error used for the error alarm. The integer is a bit encoded version of which errors to include in the error sum. The bits are encoded as follows: … |
| 1.3.6.1.4.1.52.1.2.1.9.1.4 | NodedevBroad | |||
| 1.3.6.1.4.1.52.1.2.1.9.1.4.1 | ScalardevBroadEnable | read-write | mandatory | Enable the sending of device level broadcast traps. |
| 1.3.6.1.4.1.52.1.2.1.9.1.4.2 | ScalardevBroadThreshold | read-write | mandatory | The threshold of broadcast packets within the Devicetimebase that will cause a broadcast alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.2 | NodebdAlrm | |||
| 1.3.6.1.4.1.52.1.2.1.9.2.1 | NodebdTraffic | |||
| 1.3.6.1.4.1.52.1.2.1.9.2.1.1 | ScalarbdTrafficEnable | read-write | mandatory | Enable the sending of board level traffic traps for this board. |
| 1.3.6.1.4.1.52.1.2.1.9.2.1.2 | ScalarbdTrafficThreshold | read-write | mandatory | The threshold of packets within the Devicetimebase that will cause a traffic alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.2.1.3 | ScalarbdTrafficBdDisable | read-write | mandatory | Permit a board to be disabled on a traffic threshold alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.2.2 | NodebdColls | |||
| 1.3.6.1.4.1.52.1.2.1.9.2.2.1 | ScalarbdCollsEnable | read-write | mandatory | Enable the sending of board level collision alarms. |
| 1.3.6.1.4.1.52.1.2.1.9.2.2.2 | ScalarbdCollsThreshold | read-write | mandatory | This object represents the number of collisions per good packet measured by the board that will generate an alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.2.2.3 | ScalarbdCollsBdDisable | read-write | mandatory | Permit a board to be disabled on a collision threshold alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.2.3 | NodebdError | |||
| 1.3.6.1.4.1.52.1.2.1.9.2.3.1 | ScalarbdErrorEnable | read-write | mandatory | Enable the sending of board level error alarms. |
| 1.3.6.1.4.1.52.1.2.1.9.2.3.2 | ScalarbdErrorThreshold | read-write | mandatory | This object represents the percentage of errors per good packet that will generate an alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.2.3.3 | ScalarbdErrorSource | read-write | mandatory | The type of error used for the error alarm. The integer is a bit encoded version of which errors to include in the error sum. The bits are encoded as follows: … |
| 1.3.6.1.4.1.52.1.2.1.9.2.3.4 | ScalarbdErrorBdDisable | read-write | mandatory | Permit a board to be disabled on an error threshold alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.2.4 | NodebdBroad | |||
| 1.3.6.1.4.1.52.1.2.1.9.2.4.1 | ScalarbdBroadEnable | read-write | mandatory | Enable the sending of board level broadcast traps for this board. |
| 1.3.6.1.4.1.52.1.2.1.9.2.4.2 | ScalarbdBroadThreshold | read-write | mandatory | The threshold of broadcast packets within the Devicetimebase that will cause a broadcast alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.2.4.3 | ScalarbdBroadDisable | read-write | mandatory | Permit a board to be disabled on a broadcast threshold alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.3 | NodeportAlrm | |||
| 1.3.6.1.4.1.52.1.2.1.9.3.1 | NodeportTraffic | |||
| 1.3.6.1.4.1.52.1.2.1.9.3.1.1 | ScalarportTrafficEnable | read-write | mandatory | Enable the sending of port level traffic traps for this port. |
| 1.3.6.1.4.1.52.1.2.1.9.3.1.2 | ScalarportTrafficThreshold | read-write | mandatory | The threshold of packets within the Devicetimebase that will cause a traffic alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.3.1.3 | ScalarportTrafficPortDisable | read-write | mandatory | Permit a port to be disabled on a traffic threshold alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.3.2 | NodeportColls | |||
| 1.3.6.1.4.1.52.1.2.1.9.3.2.1 | ScalarportCollsEnable | read-write | mandatory | Enable the sending of port level collsion alarms. |
| 1.3.6.1.4.1.52.1.2.1.9.3.2.2 | ScalarportCollsThreshold | read-write | mandatory | This object represents the number of collisions per good packet measured by the port that will generate an alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.3.2.3 | ScalarportCollsPortDisable | read-write | mandatory | Permit a port to be disabled on a collision threshold alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.3.3 | NodeportError | |||
| 1.3.6.1.4.1.52.1.2.1.9.3.3.1 | ScalarportErrorEnable | read-write | mandatory | Enable the sending of port level error alarms. |
| 1.3.6.1.4.1.52.1.2.1.9.3.3.2 | ScalarportErrorThreshold | read-write | mandatory | This object represents the percentage of errors per good packet that will generate an alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.3.3.3 | ScalarportErrorSource | read-write | mandatory | The type of error used for the error alarm. The integer is a bit encoded version of which errors to include in the error sum. The bits are encoded as follows: … |
| 1.3.6.1.4.1.52.1.2.1.9.3.3.4 | ScalarportErrorPortDisable | read-write | mandatory | Permit a port to be disabled on an error threshold alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.3.4 | NodeportBroad | |||
| 1.3.6.1.4.1.52.1.2.1.9.3.4.1 | ScalarportBroadEnable | read-write | mandatory | Enable the sending of port level broadcast alarms. |
| 1.3.6.1.4.1.52.1.2.1.9.3.4.2 | ScalarportBroadThreshold | read-write | mandatory | The threshold of broadcast packets within the Devicetimebase that will cause a broadcast alarm. |
| 1.3.6.1.4.1.52.1.2.1.9.3.4.3 | ScalarportBroadDisable | read-write | mandatory | Permit a port to be disabled on a broadcast threshold alarm. |
| 1.3.6.1.4.1.52.1.2.2.1 | NodedeviceR2 | |||
| 1.3.6.1.4.1.52.1.2.2.1.3 | NodetokenRingD | |||
| 1.3.6.1.4.1.52.1.2.2.1.3.1 | ScalardeviceTRPortsOn | read-only | mandatory | This gives the number of Token Ring ports enabled on this device. |
| 1.3.6.1.4.1.52.1.2.2.1.3.2 | ScalardeviceTRPorts | read-only | mandatory | This gives the total number of Token Ring ports on this device. |
| 1.3.6.1.4.1.52.1.2.2.1.3.3 | ScalardeviceTRRingPortsOn | read-only | mandatory | This gives the number of Token Ring ring ports that are enabled. |
| 1.3.6.1.4.1.52.1.2.2.1.3.4 | ScalardeviceTRRingPorts | read-only | mandatory | This gives the total number of Token Ring ring ports on this device. |
| 1.3.6.1.4.1.52.1.2.2.1.3.5 | ScalardeviceTRLans | read-only | mandatory | This gives the number of Token Rings formed on this device. |
| 1.3.6.1.4.1.52.1.2.2.1.3.6 | ScalardeviceTRBoards | read-only | mandatory | This returns the number of Token Ring boards on the device. |
| 1.3.6.1.4.1.52.1.2.2.1.3.7 | ScalardeviceTRBoardMap | read-only | mandatory | The slots that contain Token Ring MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 2 indicates t… |
| 1.3.6.1.4.1.52.1.2.2.2 | NodenetworkR2 | |||
| 1.3.6.1.4.1.52.1.2.2.3 | NodeboardR2 | |||
| 1.3.6.1.4.1.52.1.2.2.3.1 | NodecommonB | |||
| 1.3.6.1.4.1.52.1.2.2.3.1.1 | ScalarboardIndex | read-only | mandatory | The slot number of this board. |
| 1.3.6.1.4.1.52.1.2.2.3.1.2 | ScalarboardName | read-write | mandatory | The name of the board. This field will only contain printable ASCII characters. |
| 1.3.6.1.4.1.52.1.2.2.3.1.3 | ScalarboardType | read-only | mandatory | The type of the MIM. (eg. FOT, TPT, etc). See appendix A for encoding. |
| 1.3.6.1.4.1.52.1.2.2.3.1.4 | ScalarboardTotalPorts | read-only | mandatory | Total number of ports supported on this board. |
| 1.3.6.1.4.1.52.1.2.2.3.1.5 | ScalarboardStatus | read-write | deprecated | The administrative status of this MIM. |
| 1.3.6.1.4.1.52.1.2.2.3.1.6 | ScalarboardPortsOn | read-only | mandatory | The number of operating ports on the board. |
| 1.3.6.1.4.1.52.1.2.2.3.1.7 | ScalarboardOper | read-only | deprecated | Returns a value indicating whether any of the enabled ports on the board are not operational, thereby placing the board in a non-operational state. |
| 1.3.6.1.4.1.52.1.2.2.3.1.8 | ScalarboardActiveUsers | read-only | mandatory | The number of active users seen on this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2 | NodeethernetB | |||
| 1.3.6.1.4.1.52.1.2.2.3.2.1 | ScalarboardTotalPkts | read-only | mandatory | The total number of packets this board has seen since the last reset. |
| 1.3.6.1.4.1.52.1.2.2.3.2.2 | ScalarboardErrorPkts | read-only | mandatory | The number of packets that have experienced an error. |
| 1.3.6.1.4.1.52.1.2.2.3.2.3 | ScalarboardTransColls | read-only | mandatory | The number of transmit collisions this board has detected. |
| 1.3.6.1.4.1.52.1.2.2.3.2.4 | ScalarboardRecColls | read-only | mandatory | The number of Receive mode collisions this board has detected. |
| 1.3.6.1.4.1.52.1.2.2.3.2.5 | ScalarboardAlignErrs | read-only | mandatory | The number of misaligned frames this board has detected. |
| 1.3.6.1.4.1.52.1.2.2.3.2.6 | ScalarboardCRCErrs | read-only | mandatory | The number of packets with bad CRC detected. |
| 1.3.6.1.4.1.52.1.2.2.3.2.7 | ScalarboardRunts | read-only | mandatory | The number of runt frames detected by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.8 | ScalarboardOOWColls | read-only | mandatory | The number of out-of-window collisions detected by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.9 | ScalarboardNoResources | read-only | mandatory | The number of times the no resources condition was detected for this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.10 | ScalarboardRecBytes | read-only | mandatory | The number of bytes detected on this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.11 | ScalarboardGiants | read-only | mandatory | The number of packets longer than 1518 bytes detected on this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.12 | ScalarboardOSIFrames | read-only | mandatory | The number of frames with OSI protocol seen by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.13 | ScalarboardNovellFrames | read-only | mandatory | The number of frames with NOVELL protocol seen by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.14 | ScalarboardBanyanFrames | read-only | mandatory | The number of frames with BANYAN protocol seen by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.15 | ScalarboardDECNetFrames | read-only | mandatory | The number of frames with DECNET protocol seen by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.16 | ScalarboardXNSFrames | read-only | mandatory | The number of frames with XNS protocol seen by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.17 | ScalarboardIPFrames | read-only | mandatory | The number of frames with TCPIP protocol seen by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.18 | ScalarboardCtronFrames | read-only | mandatory | The number of frames with Cabletron protocol seen by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.19 | ScalarboardAppletalkFrames | read-only | mandatory | The number of frames with Appletalk protocol seen by this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.20 | ScalarboardOtherFrames | read-only | mandatory | The number of frames seen by this board, that do not fall into any of the previously listed protocol catagories. |
| 1.3.6.1.4.1.52.1.2.2.3.2.21 | Scalarboard64To127Frames | read-only | mandatory | The number of frames seen by this board, with frame sizes between 64 and 127 bytes. |
| 1.3.6.1.4.1.52.1.2.2.3.2.22 | Scalarboard128To255Frames | read-only | mandatory | The number of frames seen by this board, with frame sizes between 128 and 255 bytes. |
| 1.3.6.1.4.1.52.1.2.2.3.2.23 | Scalarboard256To511Frames | read-only | mandatory | The number of frames seen by this board, with frame sizes between 256 and 511 bytes. |
| 1.3.6.1.4.1.52.1.2.2.3.2.24 | Scalarboard512To1023Frames | read-only | mandatory | The number of frames seen by this board, with frame sizes between 512 and 1023 bytes. |
| 1.3.6.1.4.1.52.1.2.2.3.2.25 | Scalarboard1024To1518Frames | read-only | mandatory | The number of frames seen by this board, with frame sizes between 1024 and 1518 bytes. |
| 1.3.6.1.4.1.52.1.2.2.3.2.26 | ScalarboardBroadPkts | read-only | mandatory | The sum of broadcast packets detected on all ports of this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.27 | ScalarboardMultPkts | read-only | mandatory | The sum of multicast packets detected on all ports of this board. |
| 1.3.6.1.4.1.52.1.2.2.3.2.31 | ScalarboardSrcAddrLocked | read-write | mandatory | If this is set to 2, any source addresses that are detected on station port that are not in the table will cause the port to be turned off. |
| 1.3.6.1.4.1.52.1.2.2.3.3 | NodetokenRingB | |||
| 1.3.6.1.4.1.52.1.2.2.3.3.1 | ScalarboardTotalRingPorts | read-only | mandatory | The total number of ring ports on this board. |
| 1.3.6.1.4.1.52.1.2.2.3.3.2 | ScalarboardTotalStationPorts | read-only | mandatory | The total number of station ports on this board. |
| 1.3.6.1.4.1.52.1.2.2.3.3.3 | ScalarboardModeStatus | read-write | mandatory | This describes the mode of this board. autoMode means the board is using the hardware defaults. mgmtMode means the board is using setting by the user. |
| 1.3.6.1.4.1.52.1.2.2.3.3.4 | ScalarboardTotalRingPortsOn | read-only | mandatory | The number of enabled ring ports on this board. |
| 1.3.6.1.4.1.52.1.2.2.3.3.5 | ScalarboardTotalStationPortsOn | read-only | mandatory | The number of enabled station ports on this board. |
| 1.3.6.1.4.1.52.1.2.2.3.3.6 | ScalarboardSpeed | read-write | mandatory | The speed of the board. The board will expect to receive data at this speed. |
| 1.3.6.1.4.1.52.1.2.2.3.3.7 | ScalarringSpeedFault | read-only | mandatory | Data speed of station mismatches configuration speed of board. Board is automatically bypassed. |
| 1.3.6.1.4.1.52.1.2.2.3.3.8 | ScalarboardSpeedFaultPort | read-only | mandatory | This object indicates which ring speed detect circuit(s) caused the fault, if there was one. The return code indicates the location on the board feeding the sp… |
| 1.3.6.1.4.1.52.1.2.2.3.3.9 | ScalarboardFirstRingPort | read-only | mandatory | This object defines which port on the board is the first ring port. All ring port numbers will be consecutive. Using this in conjunction with BoardRingPorts, a… |
| 1.3.6.1.4.1.52.1.2.2.3.3.10 | ScalarboardBypassRingPortState | read-write | mandatory | This object sets and reports the state of the ring bypass relay on boards which contain a ring bypass relay. The ring bypass relay will separate only the ring … |
| 1.3.6.1.4.1.52.1.2.2.3.4 | NodefDDIB | |||
| 1.3.6.1.4.1.52.1.2.2.4 | NodeportR2 | |||
| 1.3.6.1.4.1.52.1.2.2.4.1 | NodecommonP | |||
| 1.3.6.1.4.1.52.1.2.2.4.1.1 | ScalarportIndex | read-only | mandatory | The slot number of this port. |
| 1.3.6.1.4.1.52.1.2.2.4.1.2 | ScalarportMediaType | read-only | mandatory | The type of the port. (eg. FOT, TPT, etc). |
| 1.3.6.1.4.1.52.1.2.2.4.1.3 | ScalarportAdminState | read-write | mandatory | The administrative status of this port. |
| 1.3.6.1.4.1.52.1.2.2.4.1.4 | ScalarportSourceAddr | read-only | mandatory | A source address that has been seen on this port. |
| 1.3.6.1.4.1.52.1.2.2.4.1.5 | ScalarportOper | read-only | mandatory | Returns a value indicating whether this port is in an operational state. |
| 1.3.6.1.4.1.52.1.2.2.4.1.6 | ScalarportActiveUsers | read-only | mandatory | The number of active users seen on this port. |
| 1.3.6.1.4.1.52.1.2.2.4.1.7 | ScalarportName | read-write | mandatory | The name of the port. this field will only contain printable ASCII characters. |
| 1.3.6.1.4.1.52.1.2.2.4.2 | NodeethernetP | |||
| 1.3.6.1.4.1.52.1.2.2.4.2.1 | ScalarportTopologyType | read-only | mandatory | The topological type of the port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.2 | ScalarportLinkStatus | read-only | mandatory | The state of the link signal for this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.3 | ScalarportStatus | read-only | mandatory | The network state of this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.4 | ScalarportTotalPkts | read-only | mandatory | The total number of packets this port has seen since the last reset. |
| 1.3.6.1.4.1.52.1.2.2.4.2.5 | ScalarportErrorPkts | read-only | mandatory | The number of packets that have experienced an error. |
| 1.3.6.1.4.1.52.1.2.2.4.2.6 | ScalarportXmitColls | read-only | mandatory | The number of Transmit mode collisions this port has detected. |
| 1.3.6.1.4.1.52.1.2.2.4.2.7 | ScalarportRecColls | read-only | mandatory | The number of Receive mode collisions this port has detected. |
| 1.3.6.1.4.1.52.1.2.2.4.2.8 | ScalarportAlignErrs | read-only | mandatory | The number of misaligned frames this port has detected. |
| 1.3.6.1.4.1.52.1.2.2.4.2.9 | ScalarportCRCErrs | read-only | mandatory | The number of packets with bad CRC detected. |
| 1.3.6.1.4.1.52.1.2.2.4.2.10 | ScalarportRunts | read-only | mandatory | The number of runt frames detected by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.11 | ScalarportOOWColls | read-only | mandatory | The number of out-of-window collisions detected by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.12 | ScalarportNoResorces | read-only | mandatory | The number of times the no resource condition is detected on this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.13 | ScalarportRecBytes | read-only | mandatory | The number of bytes detected on the network. |
| 1.3.6.1.4.1.52.1.2.2.4.2.14 | ScalarportGiants | read-only | mandatory | The number of frames longer than 1518 bytes detected on this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.15 | ScalarportRedundCrt | read-write | mandatory | The redundant circuit with which this port is associated. |
| 1.3.6.1.4.1.52.1.2.2.4.2.16 | ScalarportRedundType | read-write | mandatory | The type of port this port is in the redundant circuit. The port must be associated with a redundant circuit first, using the object portRedundCrt. |
| 1.3.6.1.4.1.52.1.2.2.4.2.17 | ScalarportRedundStatus | read-write | mandatory | The current state of this port is in the redundant circuit. The port must be associated with a redundant circuit first, using the object portRedundCrt. |
| 1.3.6.1.4.1.52.1.2.2.4.2.18 | ScalarportForceTrunkType | read-write | mandatory | This variable forces a port to be a trunk port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.19 | ScalarportOSIFrames | read-only | mandatory | The number of frames with OSI protocol seen by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.20 | ScalarportNovellFrames | read-only | mandatory | The number of frames with NOVELL protocol seen by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.21 | ScalarportBanyanFrames | read-only | mandatory | The number of frames with BANYAN protocol seen by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.22 | ScalarportDECNetFrames | read-only | mandatory | The number of frames with DECNET protocol seen by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.23 | ScalarportXNSFrames | read-only | mandatory | The number of frames with XNS protocol seen by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.24 | ScalarportIPFrames | read-only | mandatory | The number of frames with TCPIP protocol seen by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.25 | ScalarportCtronFrames | read-only | mandatory | The number of frames with Cabletron protocol seen by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.26 | ScalarportAppletalkFrames | read-only | mandatory | The number of frames with Appletalk protocol seen by this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.27 | ScalarportOtherFrames | read-only | mandatory | The number of frames seen by this port, that do not fall into any of the previously listed protocol catagories. |
| 1.3.6.1.4.1.52.1.2.2.4.2.28 | Scalarport64To127Frames | read-only | mandatory | The number of frames seen by this port, with frame sizes between 64 and 127 bytes. |
| 1.3.6.1.4.1.52.1.2.2.4.2.29 | Scalarport128To255Frames | read-only | mandatory | The number of frames seen by this port, with frame sizes between 128 and 255 bytes. |
| 1.3.6.1.4.1.52.1.2.2.4.2.30 | Scalarport256To511Frames | read-only | mandatory | The number of frames seen by this port, with frame sizes between 256 and 511 bytes. |
| 1.3.6.1.4.1.52.1.2.2.4.2.31 | Scalarport512To1023Frames | read-only | mandatory | The number of frames seen by this port, with frame sizes between 512 and 1023 bytes. |
| 1.3.6.1.4.1.52.1.2.2.4.2.32 | Scalarport1024To1518Frames | read-only | mandatory | The number of frames seen by this port, with frame sizes between 1024 and 1518 bytes. |
| 1.3.6.1.4.1.52.1.2.2.4.2.33 | ScalarportBroadPkts | read-only | mandatory | The sum of broadcast packets detected on this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.34 | ScalarportMultPkts | read-only | mandatory | The sum of multicast packets detected on this port. |
| 1.3.6.1.4.1.52.1.2.2.4.2.38 | ScalarportSrcAddrLocked | read-write | mandatory | If this is set to 2, any source addresses that are detected on station ports that are not in the table will cause the port to be turned off. |
| 1.3.6.1.4.1.52.1.2.2.4.3 | NodetokenRingP | |||
| 1.3.6.1.4.1.52.1.2.2.4.3.1 | NodestationP | |||
| 1.3.6.1.4.1.52.1.2.2.4.3.1.1 | ScalarstationPortLinkStatus | read-only | mandatory | When station is supplying phantom current the Link Signal is active. When there is no phantom current the Link Signal is inactive. |
| 1.3.6.1.4.1.52.1.2.2.4.3.1.2 | ScalarstationPortLinkStateTime | read-write | mandatory | The amount of in seconds which have elapsed since the station port last changed state. Note: setting this to zero will clear the time. |
| 1.3.6.1.4.1.52.1.2.2.4.3.2 | NoderingP | |||
| 1.3.6.1.4.1.52.1.2.2.4.3.2.1 | ScalarringPortLinkStatus | read-only | obsolete | Reports the link state of a ring port. |
| 1.3.6.1.4.1.52.1.2.2.4.3.2.2 | ScalarringPortLinkStateTime | read-write | obsolete | Reports the time (in seconds) since the ring port's link state changed. |
| 1.3.6.1.4.1.52.1.2.2.4.3.3 | NoderingPort2 | |||
| 1.3.6.1.4.1.52.1.2.2.4.3.3.1 | NodecommonRP | |||
| 1.3.6.1.4.1.52.1.2.2.4.3.3.1.1 | ScalarcommonRPcapabilities | read-only | mandatory | This object returns a code indicating that the queried ring port is nonautowrap, autowrap or selectable. |
| 1.3.6.1.4.1.52.1.2.2.4.3.3.2 | NodeautowrapRP | |||
| 1.3.6.1.4.1.52.1.2.2.4.3.3.2.1 | ScalarautowrapRPFaultStatus | read-only | mandatory | This object reports the wire fault of an autowrappable ring port. |
| 1.3.6.1.4.1.52.1.2.2.4.3.3.2.2 | ScalarautowrapRPFaultStateTime | read-write | mandatory | This object reports the amount of time in time ticks since the ring port fault state last changed. Writing zero to this object resets the time. If a zero is re… |
| 1.3.6.1.4.1.52.1.2.2.4.3.3.2.3 | ScalarautowrapRPSelectedType | read-write | mandatory | This object indicates the media type of the indicated ring port on some boards. Some boards provide both STP and fiber optic ring ports. The unselectable value… |
| 1.3.6.1.4.1.52.1.2.2.4.3.3.2.4 | ScalarautowrapRPPhantomCurrent | read-write | mandatory | This object tells the board to turn on phantom current for the ring port and look for wire faults. NoPhantomAvailable will return an error if set. A set of act… |
| 1.3.6.1.4.1.52.1.2.2.4.4 | NodefDDIP | |||
| 1.3.6.1.4.1.52.1.6.1.1 | NodefNB | |||
| 1.3.6.1.4.1.52.1.6.1.1.1 | ScalarconnectedLeft | read-write | mandatory | The Connected Left board (board n + 1) has the following states: Detached == 1 (Management (only management) detached, read/write). Attached == 2 (Management/A… |
| 1.3.6.1.4.1.52.1.6.1.1.2 | ScalarconnectedRight | read-write | mandatory | The Connected Right board (board n - 1) has the following states: Detached == 1 (Management (only management) detached, read/write). Attached == 2 (Management/… |
| 1.3.6.1.4.1.52.1.6.1.1.3 | ScalarboardBypassState | read-write | mandatory | This object indicates that the board is in the bypassed state when it is ON. Bypassed means the board is NOT attached to the FNB. |