ITF-MIB
67 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.2.1 | ScalarifNumber | read-only | mandatory | The number of network interfaces (regardless of their current state) present on this system. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: … |
| 1.3.6.1.2.1.2.2 | TableifTable | not-accessible | mandatory | A list of interface entries. The number of entries is given by the value of ifNumber. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP ifNumber. |
| 1.3.6.1.2.1.2.2.1 | RowifEntry | not-accessible | mandatory | An entry containing management information applicable to a particular interface. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.2.1.2.2.1.1 | ColumnifIndex | read-only | mandatory | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.2.1.2.2.1.2 | ColumnifDescr | read-only | mandatory | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the i… |
| 1.3.6.1.2.1.2.2.1.3 | ColumnifType | read-only | mandatory | The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifTy… |
| 1.3.6.1.2.1.2.2.1.4 | ColumnifMtu | read-only | mandatory | The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram… |
| 1.3.6.1.2.1.2.2.1.5 | ColumnifSpeed | read-only | mandatory | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation ca… |
| 1.3.6.1.2.1.2.2.1.6 | ColumnifPhysAddress | read-only | mandatory | The interface's address at its protocol sub-layer. The interface's media-specific MIB must define the bit and byte ordering and format of the value contained b… |
| 1.3.6.1.2.1.2.2.1.7 | ColumnifAdminStatus | read-write | mandatory | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces… |
| 1.3.6.1.2.1.2.2.1.8 | ColumnifOperStatus | read-only | mandatory | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If ifAdminStatus is down(2) then ifOp… |
| 1.3.6.1.2.1.2.2.1.9 | ColumnifLastChange | read-only | mandatory | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of… |
| 1.3.6.1.2.1.2.2.1.10 | ColumnifInOctets | read-only | mandatory | The total number of octets received on the interface, including framing characters. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVAL… |
| 1.3.6.1.2.1.2.2.1.11 | ColumnifInUcastPkts | read-only | mandatory | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. ALC… |
| 1.3.6.1.2.1.2.2.1.12 | ColumnifInNUcastPkts | read-only | deprecated | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. This ob… |
| 1.3.6.1.2.1.2.2.1.13 | ColumnifInDiscards | read-only | mandatory | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.2.1.2.2.1.14 | ColumnifInErrors | read-only | mandatory | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For char… |
| 1.3.6.1.2.1.2.2.1.15 | ColumnifInUnknownProtos | read-only | mandatory | For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For charac… |
| 1.3.6.1.2.1.2.2.1.16 | ColumnifOutOctets | read-only | mandatory | The total number of octets transmitted out of the interface, including framing characters. ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO… |
| 1.3.6.1.2.1.2.2.1.17 | ColumnifOutUcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.2.1.2.2.1.18 | ColumnifOutNUcastPkts | read-only | deprecated | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-laye… |
| 1.3.6.1.2.1.2.2.1.19 | ColumnifOutDiscards | read-only | mandatory | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.2.1.2.2.1.20 | ColumnifOutErrors | read-only | mandatory | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfac… |
| 1.3.6.1.2.1.2.2.1.21 | ColumnifOutQLen | read-only | deprecated | The length of the output packet queue (in packets). ALCATEL NOTE: SUPPORT: NO INSRVMOD: NA RANGE: See above PERSIST: NA DEFVALUE: NA UNITS: packets |
| 1.3.6.1.2.1.2.2.1.22 | ColumnifSpecific | read-only | deprecated | A reference to MIB definitions specific to the particular media being used to realize the interface. It is recommended that this value point to an instance of … |
| 1.3.6.1.2.1.31 | NodeifMIB | |||
| 1.3.6.1.2.1.31.1 | NodeifMIBObjects | |||
| 1.3.6.1.2.1.31.1.1 | TableifXTable | not-accessible | mandatory | A list of interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table. ALCATEL N… |
| 1.3.6.1.2.1.31.1.1.1 | RowifXEntry | not-accessible | mandatory | An entry containing additional management information applicable to a particular interface. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.2.1.31.1.1.1.1 | ColumnifName | read-only | mandatory | The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use … |
| 1.3.6.1.2.1.31.1.1.1.2 | ColumnifInMulticastPkts | read-only | mandatory | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.2.1.31.1.1.1.3 | ColumnifInBroadcastPkts | read-only | mandatory | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. ALCATEL NOTE: SUPPOR… |
| 1.3.6.1.2.1.31.1.1.1.4 | ColumnifOutMulticastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.2.1.31.1.1.1.5 | ColumnifOutBroadcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.2.1.31.1.1.1.6 | ColumnifHCInOctets | read-only | mandatory | The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. ALCATEL NOTE: SUPPORT: YES I… |
| 1.3.6.1.2.1.31.1.1.1.7 | ColumnifHCInUcastPkts | read-only | mandatory | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Thi… |
| 1.3.6.1.2.1.31.1.1.1.8 | ColumnifHCInMulticastPkts | read-only | mandatory | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.2.1.31.1.1.1.9 | ColumnifHCInBroadcastPkts | read-only | mandatory | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-… |
| 1.3.6.1.2.1.31.1.1.1.10 | ColumnifHCOutOctets | read-only | mandatory | The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets. ALCATEL NOTE: SUPPOR… |
| 1.3.6.1.2.1.31.1.1.1.11 | ColumnifHCOutUcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.2.1.31.1.1.1.12 | ColumnifHCOutMulticastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.2.1.31.1.1.1.13 | ColumnifHCOutBroadcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.2.1.31.1.1.1.14 | ColumnifLinkUpDownTrapEnable | read-write | mandatory | Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which d… |
| 1.3.6.1.2.1.31.1.1.1.15 | ColumnifHighSpeed | read-only | mandatory | An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface i… |
| 1.3.6.1.2.1.31.1.1.1.16 | ColumnifPromiscuousMode | read-write | mandatory | This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when t… |
| 1.3.6.1.2.1.31.1.1.1.17 | ColumnifConnectorPresent | read-only | mandatory | This object has the value 'true(1)' if the interface sublayer has a physical connector and the value 'false(2)' otherwise. ALCATEL NOTE: SUPPORT: YES INSRVMOD:… |
| 1.3.6.1.2.1.31.1.1.1.18 | ColumnifAlias | read-write | mandatory | This object is an 'alias' name for the interface as specified by a network manager, and provides a non- volatile 'handle' for the interface. On the first insta… |
| 1.3.6.1.2.1.31.1.1.1.19 | ColumnifCounterDiscontinuityTime | read-only | mandatory | The value of sysUpTime on the most recent occasion at which any one or more of this interface's counters suffered a discontinuity. The relevant counters are th… |
| 1.3.6.1.2.1.31.1.2 | TableifStackTable | not-accessible | mandatory | The table containing information on the relationships between the multiple sub-layers of network interfaces. In particular, it contains information on which su… |
| 1.3.6.1.2.1.31.1.2.1 | RowifStackEntry | not-accessible | mandatory | Information on a particular relationship between two sub-layers, specifying that one sub-layer runs on 'top' of the other sub-layer. Each sub-layer corresponds… |
| 1.3.6.1.2.1.31.1.2.1.1 | ColumnifStackHigherLayer | not-accessible | mandatory | The value of ifIndex corresponding to the higher sub-layer of the relationship, i.e., the sub-layer which runs on 'top' of the sub-layer identified by the corr… |
| 1.3.6.1.2.1.31.1.2.1.2 | ColumnifStackLowerLayer | not-accessible | mandatory | The value of ifIndex corresponding to the lower sub- layer of the relationship, i.e., the sub-layer which runs 'below' the sub-layer identified by the correspo… |
| 1.3.6.1.2.1.31.1.2.1.3 | ColumnifStackStatus | read-only | mandatory | The status of the relationship between two sub-layers. Changing the value of this object from 'active' to 'notInService' or 'destroy' will likely have conseque… |
| 1.3.6.1.2.1.31.1.3 | TableifTestTable | not-accessible | optional | This table contains one entry per interface. It defines objects which allow a network manager to instruct an agent to test an interface for various faults. Tes… |
| 1.3.6.1.2.1.31.1.3.1 | RowifTestEntry | not-accessible | optional | An entry containing objects for invoking tests on an interface. ALCATEL NOTE: SUPPORT: YES |
| 1.3.6.1.2.1.31.1.3.1.1 | ColumnifTestId | read-write | optional | This object identifies the current invocation of the interface's test. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: NO DEFVALUE: NA UNITS… |
| 1.3.6.1.2.1.31.1.3.1.2 | ColumnifTestStatus | read-write | optional | This object indicates whether or not some manager currently has the necessary 'ownership' required to invoke a test on this interface. A write to this object i… |
| 1.3.6.1.2.1.31.1.3.1.4 | ColumnifTestResult | read-only | optional | This object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this … |
| 1.3.6.1.2.1.31.1.3.1.6 | ColumnifTestOwner | read-write | optional | The entity which currently has the 'ownership' required to invoke a test on this interface. ALCATEL NOTE: SUPPORT: YES INSRVMOD: YES RANGE: See above PERSIST: … |
| 1.3.6.1.2.1.31.1.4 | TableifRcvAddressTable | not-accessible | mandatory | This table contains an entry for each address (broadcast, multicast, or uni-cast) for which the system will receive packets/frames on a particular interface, e… |
| 1.3.6.1.2.1.31.1.4.1 | RowifRcvAddressEntry | not-accessible | mandatory | A list of objects identifying an address for which the system will accept packets/frames on the particular interface identified by the index value ifIndex. |
| 1.3.6.1.2.1.31.1.4.1.1 | ColumnifRcvAddressAddress | not-accessible | mandatory | An address for which the system will accept packets/frames on this entry's interface. |
| 1.3.6.1.2.1.31.1.4.1.2 | ColumnifRcvAddressStatus | read-write | mandatory | This object is used to create and delete rows in the ifRcvAddressTable. |
| 1.3.6.1.2.1.31.1.4.1.3 | ColumnifRcvAddressType | read-write | mandatory | This object has the value nonVolatile(3) for those entries in the table which are valid and will not be deleted by the next restart of the managed system. Entr… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| InterfaceIndex | INTEGER | ||
| InterfaceIndexOrZero | INTEGER (0..2147483647) | ||
| OwnerString | OCTET STRING |