JETDIRECT3-MIB
509 objects
Objects used in HP JetDirect Print Servers
Imported Objects
| RFC1155-SMI | enterprises TimeTicks |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11 | Identityhp | Objects used in HP JetDirect Print Servers | ||
| 1.3.6.1.4.1.11.2 | Nodenm | |||
| 1.3.6.1.4.1.11.2.3 | Nodehpsystem | |||
| 1.3.6.1.4.1.11.2.3.9 | NodenetPeripheral | |||
| 1.3.6.1.4.1.11.2.3.9.1 | NodenetPrinter | |||
| 1.3.6.1.4.1.11.2.3.9.1.1 | NodegeneralDeviceStatus | |||
| 1.3.6.1.4.1.11.2.3.9.1.1.1 | ScalargdStatusBytes | read-only | current | The number of valid bytes in the gdStatusEntry array. |
| 1.3.6.1.4.1.11.2.3.9.1.1.2 | NodegdStatusEntry | |||
| 1.3.6.1.4.1.11.2.3.9.1.1.2.1 | ScalargdStatusLineState | read-only | current | This describes the line state of the peripheral. When non-zero, the peripheral is off-line. When zero the peripheral is on-line. |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.2 | ScalargdStatusPaperState | read-only | current | This describes the state of the paper on the peripheral. When non-zero, the peripheral has a paper problem. When zero, the peripheral does not have a paper pro… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.3 | ScalargdStatusInterventionState | read-only | current | This describes the intervention state of the peripheral. When non-zero, the peripheral requires human intervention to continue working. When zero, it requires … |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.4 | ScalargdStatusNewMode | read-only | obsolete | This indicates to which read channel state the card should move. When non-zero, the card should indicate that the read channel is idle. When zero, the card sho… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.5 | ScalargdStatusConnectionTerminationAck | read-only | obsolete | This indicates whether the peripheral is waiting for the Connection termination ACK. When non-zero, it is waiting. When zero, it is not waiting. |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.6 | ScalargdStatusPeripheralError | read-only | current | This is the error code from the peripheral. |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.8 | ScalargdStatusPaperOut | read-only | current | This indicates that the peripheral is out of paper. off (0), paper-out-or-paper-mount (1), manual-paper-feed-needed (2) For some peripherals, such as the HP La… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.9 | ScalargdStatusPaperJam | read-only | current | This indicates that the peripheral has a paper jam. off (0), paper-jam(1) For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, … |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.10 | ScalargdStatusTonerLow | read-only | current | This indicates that the peripheral has a low toner condition. off (0), toner-low (1), no-toner-cartridge (2) For some peripherals, such as the HP LaserJet IIIS… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.11 | ScalargdStatusPagePunt | read-only | current | This indicates that the peripheral did not receive data fast enough to keep up with the print engine when generating a page. For some peripherals, such as the … |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.12 | ScalargdStatusMemoryOut | read-only | current | This indicates that the peripheral did not have enough memory to render an image on a page. For some peripherals, such as the HP LaserJet IIISi printer or HP D… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.13 | ScalargdStatusIoActive | read-only | current | This indicates that the peripheral is processing data from this I/O interface card. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.14 | ScalargdStatusBusy | read-only | current | This indicates that the peripheral is busy processing print/plot data. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, thi… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.15 | ScalargdStatusWait | read-only | current | This indicates that the peripheral is waiting for print/plot data to process. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plott… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.16 | ScalargdStatusInitialize | read-only | current | This indicates that the peripheral is initializing or warming up. off (0), initializing (1), warm-up(2) For some peripherals, such as the HP LaserJet IIISi pri… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.17 | ScalargdStatusDoorOpen | read-only | current | This indicates that the peripheral cover or door is open. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, this value is al… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.18 | ScalargdStatusPrinting | read-only | current | This indicates that the peripheral is printing or otherwise marking or moving paper. off (0), ordinary-page (1), test-fonts-config-or-start-page (2) For some p… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.19 | ScalargdStatusPaperOutput | read-only | current | This indicates that the peripheral has a paper output problem such as the output storage bin being full. off (0), output-storage-full (1) For some peripherals,… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.20 | ScalargdStatusReserved | read-only | obsolete | This is the reserved area that is not currently used, but will allow for growth within the gdStatusEntry table. |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.21 | ScalargdStatusNovBusy | read-only | obsolete | This indicates if this channel is active. If the value is 0 then this channel is active or the peripheral is idle. If this value is non-zero then another chann… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.22 | ScalargdStatusLlcBusy | read-only | obsolete | This indicates if this channel is active. If the value is 0 then this channel is active or the peripheral is idle. If this value is non-zero then another chann… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.23 | ScalargdStatusTcpBusy | read-only | obsolete | This indicates if this channel is active. If the value is 0 then this channel is active or the peripheral is idle. If this value is non-zero then another chann… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.24 | ScalargdStatusAtBusy | read-only | obsolete | This indicates if this channel is active. If the value is 0 then this channel is active or the peripheral is idle. If this value is non-zero then another chann… |
| 1.3.6.1.4.1.11.2.3.9.1.1.3 | ScalargdStatusDisplay | read-only | current | The string diplayed on the peripheral front panel. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, this is always a zero l… |
| 1.3.6.1.4.1.11.2.3.9.1.1.4 | ScalargdStatusJobName | read-only | current | The current job name set by the peripheral. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, this is always a zero length s… |
| 1.3.6.1.4.1.11.2.3.9.1.1.5 | ScalargdStatusSource | read-only | current | A string indicating the name of the physical port or protocol the printer is currently getting data from. |
| 1.3.6.1.4.1.11.2.3.9.1.1.6 | ScalargdStatusPapstatus | read-only | current | A string indicating the Appletalk papstatus response. |
| 1.3.6.1.4.1.11.2.3.9.1.1.7 | ScalargdStatusId | read-only | current | A formatted string describing this peripheral. |
| 1.3.6.1.4.1.11.2.3.9.1.1.8 | ScalargdStatusDisplayCode | read-only | obsolete | This is the display code that the peripheral uses to tell the card what type of display the front panel of the printer is. Starting with firmware release X.20.… |
| 1.3.6.1.4.1.11.2.3.9.1.1.9 | ScalargdStatusNlsCode | read-only | current | This value is the representation of what native language the printer is in currently. |
| 1.3.6.1.4.1.11.2.3.9.1.1.10 | ScalargdStatusJobTimeout | read-write | obsolete | This value represents (in seconds) the maximum time of inactivity which must elapse before the JetDirect card switches from the current network protocol to ano… |
| 1.3.6.1.4.1.11.2.3.9.1.1.11 | ScalargdStatusPjlUstatus | read-write | obsolete | This object will enable/disable PJL ustatus. disabled (0), enabled (1) |
| 1.3.6.1.4.1.11.2.3.9.1.1.12 | ScalargdStatusLaaSupport | read-write | current | |
| 1.3.6.1.4.1.11.2.3.9.1.1.13 | ScalargdPasswords | read-write | current | This object is used as a 256 byte NVRAM area for JetAdmin. It is completely managed by JetAdmin. Initially it is initialized to all zeros. A coldboot will re-i… |
| 1.3.6.1.4.1.11.2.3.9.1.1.18 | ScalargdStatusAtPrinterName | read-write | current | The AppleTalk name of the printer. |
| 1.3.6.1.4.1.11.2.3.9.1.1.19 | ScalargdStatusAtPrinterType | read-only | obsolete | The AppleTalk type of the printer. |
| 1.3.6.1.4.1.11.2.3.9.1.2 | NodenetPrinterType | |||
| 1.3.6.1.4.1.11.2.3.9.1.2.1 | Nodehplj5si | |||
| 1.3.6.1.4.1.11.2.3.9.1.2.2 | Nodehplj5m | |||
| 1.3.6.1.4.1.11.2.3.9.1.2.3 | Nodehplj6 | |||
| 1.3.6.1.4.1.11.2.3.9.1.2.4 | Nodehplj2100 | |||
| 1.3.6.1.4.1.11.2.3.9.1.2.5 | Nodehplj4000 | |||
| 1.3.6.1.4.1.11.2.3.9.1.2.6 | Nodehplj5000 | |||
| 1.3.6.1.4.1.11.2.3.9.1.2.7 | Nodehplj8100 | |||
| 1.3.6.1.4.1.11.2.3.9.1.2.8 | Nodehpclj4500 | |||
| 1.3.6.1.4.1.11.2.3.9.1.2.9 | Nodehplj8000 | |||
| 1.3.6.1.4.1.11.2.3.9.1.2.10 | Nodenotused1 | |||
| 1.3.6.1.4.1.11.2.3.9.1.2.11 | Nodenotused2 | |||
| 1.3.6.1.4.1.11.2.3.9.1.2.12 | Nodehplj4050 | |||
| 1.3.6.1.4.1.11.2.3.9.1.2.13 | Nodenotused3 | |||
| 1.3.6.1.4.1.11.2.3.9.1.2.14 | Nodehpclj4550 | |||
| 1.3.6.1.4.1.11.2.3.9.1.2.15 | Nodenotused4 | |||
| 1.3.6.1.4.1.11.2.3.9.1.2.16 | Nodehpclj8500 | |||
| 1.3.6.1.4.1.11.2.3.9.1.2.17 | Nodehplj8150 | |||
| 1.3.6.1.4.1.11.2.3.9.4 | NodenetPML | |||
| 1.3.6.1.4.1.11.2.3.9.4.1 | NodenetPMLtrap | |||
| 1.3.6.1.4.1.11.2.3.9.4.1.1 | ScalarpmlTrapEnable | read-write | current | This OID is used to enable individual peripheral trappable objects through JetDirect. |
| 1.3.6.1.4.1.11.2.3.9.4.1.2 | ScalarpmlTrapDisable | read-write | current | This OID is used to disable individual peripheral trappable objects through JetDirect. |
| 1.3.6.1.4.1.11.2.3.9.4.2 | NodenetPMLmgmt | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | Nodedevice | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4 | Nodedestination-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1 | Nodeprint-engine | |||
| 1.3.6.1.4.1.11.2.4 | Nodeinterface | |||
| 1.3.6.1.4.1.11.2.4.1 | Nodeieee8023Mac | |||
| 1.3.6.1.4.1.11.2.4.1.1 | Tableieee8023MacTable | not-accessible | current | A list of ieee8023MacEntry entries. |
| 1.3.6.1.4.1.11.2.4.1.1.1 | Rowieee8023MacEntry | not-accessible | current | An entry containing the hp ieee8023 extentions. |
| 1.3.6.1.4.1.11.2.4.1.1.1.1 | Columnieee8023MacIndex | read-only | current | The index value which uniquely identifies the interface/port to which this entry is applicable. The interface/port identified by a particular value of this ind… |
| 1.3.6.1.4.1.11.2.4.1.1.1.2 | Columnieee8023MacTransmitteds | read-only | current | The number of frames successfully transmitted. |
| 1.3.6.1.4.1.11.2.4.1.1.1.3 | Columnieee8023MacNotTransmitteds | read-only | current | The number of frames not transmitted. |
| 1.3.6.1.4.1.11.2.4.1.1.1.4 | Columnieee8023MacDeferreds | read-only | current | Number of frames which were successfully transmitted after a deferral. If any collisions occurred before transmission, xmtDeferredTransmission isn't incremente… |
| 1.3.6.1.4.1.11.2.4.1.1.1.5 | Columnieee8023MacCollisions | read-only | current | Total number of transmit attempts that were retransmitted due to collisions, and are subsequently transmitted successfully. |
| 1.3.6.1.4.1.11.2.4.1.1.1.6 | Columnieee8023MacSingleCollisions | read-only | current | Number of transmit attempts that are involved in a single collision, and are subsequently transmitted successfully. |
| 1.3.6.1.4.1.11.2.4.1.1.1.7 | Columnieee8023MacMultipleCollisions | read-only | current | Number of transmit attempts that are involved in between one and fifteen collision attempts, and are subsequently transmitted successfully. |
| 1.3.6.1.4.1.11.2.4.1.1.1.8 | Columnieee8023MacExcessCollisions | read-only | current | The number of transmits that occur after more than 15 collisions, and are subsequently transmitted successfully. |
| 1.3.6.1.4.1.11.2.4.1.1.1.9 | Columnieee8023MacLateCollisions | read-only | current | The number of collisions that occurred after one end-to-end frame propagation delay. |
| 1.3.6.1.4.1.11.2.4.1.1.1.10 | Columnieee8023MacCarrierLostErrors | read-only | current | Number of times that carrier sense was lost when attempting to transmit. |
| 1.3.6.1.4.1.11.2.4.1.1.1.11 | Columnieee8023MacNoHeartBeatErrors | read-only | current | The number of times the MAU failed to assert SQE after transmitting a packet. |
| 1.3.6.1.4.1.11.2.4.1.1.1.12 | Columnieee8023MacFramesReceiveds | read-only | current | The number of frames successfully received. |
| 1.3.6.1.4.1.11.2.4.1.1.1.13 | Columnieee8023MacUndeliverableFramesReceiveds | read-only | current | The number of frames received that could not be delivered because the software buffer was overrun when frames were sent faster than they could be received. |
| 1.3.6.1.4.1.11.2.4.1.1.1.14 | Columnieee8023MacCrcErrors | read-only | current | The number of Cyclical Redundancy Check (CRC) errors detected. |
| 1.3.6.1.4.1.11.2.4.1.1.1.15 | Columnieee8023MacAlignmentErrors | read-only | current | The number of frames received that were both misaligned and had bad CRC. |
| 1.3.6.1.4.1.11.2.4.1.1.1.16 | Columnieee8023MacResourceErrors | read-only | current | The number of frames received that were lost due to lack of resources. |
| 1.3.6.1.4.1.11.2.4.1.1.1.17 | Columnieee8023MacControlFieldErrors | read-only | current | The number of frames received with errors in the control field. |
| 1.3.6.1.4.1.11.2.4.1.1.1.18 | Columnieee8023MacUnknownProtocolErrors | read-only | current | The number frames dropped because the type field or sap field referenced an invalid protocol. |
| 1.3.6.1.4.1.11.2.4.1.1.1.19 | Columnieee8023MacMulticastsAccepteds | read-only | current | Number of accepted muliticast addresses. |
| 1.3.6.1.4.1.11.2.4.1.1.1.20 | Columnieee8023MacInfiniteDeferrals | read-only | current | The number of frames not transmitted successfully due to excessive number of deferrals. |
| 1.3.6.1.4.1.11.2.4.1.1.1.21 | Columnieee8023MacUnderflowErrors | read-only | current | The number of frames not transmitted successfully because an underflow occurred on the transmit. |
| 1.3.6.1.4.1.11.2.4.1.1.1.22 | Columnieee8023MacNoResources | read-only | current | The number of frames not transmitted successfully because the MAC lacked resources to handle the frame. |
| 1.3.6.1.4.1.11.2.4.1.1.1.23 | Columnieee8023MacLengthErrors | read-only | current | The number of frames received that have length errors. |
| 1.3.6.1.4.1.11.2.4.1.2 | Tableieee8023MacMcaTable | not-accessible | current | The 802.3 multicast address table. |
| 1.3.6.1.4.1.11.2.4.1.2.1 | Rowieee8023MacMcaEntry | not-accessible | current | Entries in the ieee8023MacMcaTable. |
| 1.3.6.1.4.1.11.2.4.1.2.1.1 | Columnieee8023MacMcaIndex | read-only | current | The index corresponding to a particular instance in the ieee8023MacMcaTable. |
| 1.3.6.1.4.1.11.2.4.1.2.1.2 | Columnieee8023MacMcaAddress | read-only | current | The multicast address of a particular instance in the ieee8023McaTable. |
| 1.3.6.1.4.1.11.2.4.1.3 | Scalarieee8023MacState | read-only | current | A state variable that indicates the current state of the MAC driver. |
| 1.3.6.1.4.1.11.2.4.1.4 | Scalarieee8023MacConfigurationStatus | read-only | current | These are the four bits of hardware power sense and jumper sense registers: 15 14 13 12 11 + |apa|mpa|ext|int| unused | + unused Reserved for future status. ap… |
| 1.3.6.1.4.1.11.2.4.1.5 | Scalarieee8023MacNumberActiveMCAs | read-only | current | The number of entries in the multicast address table. |
| 1.3.6.1.4.1.11.2.4.1.6 | Scalarieee8023MacMauType | read-only | current | This object identifies the 10 or 100 Mb/s MAU type. It represents the operational type of the MAU, as determined by (1) auto-negotiation, (2) manual configurat… |
| 1.3.6.1.4.1.11.2.4.1.7 | Scalarieee8023MacJackType | read-only | current | Jack type associated with the selected MAU type. |
| 1.3.6.1.4.1.11.2.4.1.8 | Scalarieee8023MacMauAutoNegAdminStatus | read-only | current | This object indicates whether the interface with auto-negotiation signaling has this ability enabled. |
| 1.3.6.1.4.1.11.2.4.2 | Nodeieee8025Mac | |||
| 1.3.6.1.4.1.11.2.4.2.1 | Tableieee8025MacTable | not-accessible | current | A list of ieee8025MacEntry entries. |
| 1.3.6.1.4.1.11.2.4.2.1.1 | Rowieee8025MacEntry | not-accessible | current | An entry containing the hp ieee8025 extentions. |
| 1.3.6.1.4.1.11.2.4.2.1.1.1 | Columnieee8025MacIndex | read-only | current | The index value which uniquely identifies the interface/port to which this entry is applicable. The interface/port identified by a particular value of this ind… |
| 1.3.6.1.4.1.11.2.4.2.1.1.2 | Columnieee8025MacTransmitteds | read-only | current | The number of frames successfully transmitted. |
| 1.3.6.1.4.1.11.2.4.2.1.1.3 | Columnieee8025MacUnderflowErrors | read-only | current | The number of frames not transmitted due to underflow errors. |
| 1.3.6.1.4.1.11.2.4.2.1.1.4 | Columnieee8025MacNoResources | read-only | current | The number of frames which were not transmitted due to no outbound resources. |
| 1.3.6.1.4.1.11.2.4.2.1.1.5 | Columnieee8025MacFramesReceiveds | read-only | current | Total number of frames received. |
| 1.3.6.1.4.1.11.2.4.2.1.1.6 | Columnieee8025MacLineErrors | read-only | current | Number of received line error frames. |
| 1.3.6.1.4.1.11.2.4.2.1.1.7 | Columnieee8025MacBurstErrors | read-only | current | Number of received burst errors. |
| 1.3.6.1.4.1.11.2.4.2.1.1.8 | Columnieee8025MacFSSetErrors | read-only | current | The number of received FS set errors. |
| 1.3.6.1.4.1.11.2.4.2.1.1.9 | Columnieee8025MacCongestions | read-only | current | The number of received congestion packets. |
| 1.3.6.1.4.1.11.2.4.2.1.1.10 | Columnieee8025MacLostFrameErrors | read-only | current | Number of received lost frame errors. |
| 1.3.6.1.4.1.11.2.4.2.1.1.11 | Columnieee8025MacFrameCopiedErrors | read-only | current | The number of received frame copied errors. |
| 1.3.6.1.4.1.11.2.4.2.1.1.12 | Columnieee8025MacTooLongErrors | read-only | current | The number received too long errors. |
| 1.3.6.1.4.1.11.2.4.2.1.1.13 | Columnieee8025MacLengthErrors | read-only | current | The number of recevied length errors. |
| 1.3.6.1.4.1.11.2.4.2.1.1.14 | Columnieee8025MacOverflowErrors | read-only | current | The number of received overflow errors. |
| 1.3.6.1.4.1.11.2.4.2.1.1.15 | Columnieee8025MacTokenErrors | read-only | current | The number of token errors. |
| 1.3.6.1.4.1.11.2.4.2.2 | Tableieee8025MacMcaTable | not-accessible | current | The 802.5 multicast address table. |
| 1.3.6.1.4.1.11.2.4.2.2.1 | Rowieee8025MacMcaEntry | not-accessible | current | Entries in the ieee8025MacMcaTable. |
| 1.3.6.1.4.1.11.2.4.2.2.1.1 | Columnieee8025MacMcaIndex | read-only | current | The index corresponding to a particular instance in the ieee8025MacMcaTable. |
| 1.3.6.1.4.1.11.2.4.2.2.1.2 | Columnieee8025MacMcaAddress | read-only | current | The multicast address of a particular instance in the ieee8025McaTable. |
| 1.3.6.1.4.1.11.2.4.2.3 | Scalarieee8025MacState | read-only | current | A state variable that indicates the current state of the MAC driver. |
| 1.3.6.1.4.1.11.2.4.2.4 | Scalarieee8025MacConfigurationStatus | read-only | current | These are the four bits of hardware power sense and jumper sense registers: 15 14 13 12 11 + |apa|mpa|ext|int| unused | + unused Reserved for future status. ap… |
| 1.3.6.1.4.1.11.2.4.2.5 | Scalarieee8025MacNumberActiveMCAs | read-only | current | The number of entries in the multicast address table. |
| 1.3.6.1.4.1.11.2.4.3 | NodenpCard | |||
| 1.3.6.1.4.1.11.2.4.3.1 | NodenpSys | |||
| 1.3.6.1.4.1.11.2.4.3.1.1 | ScalarnpSysState | read-only | current | The state of the LAN card to network peripheral interface driver. |
| 1.3.6.1.4.1.11.2.4.3.1.2 | ScalarnpSysStatusMessage | read-only | current | A status string reflecting the current state of the card and peripheral. |
| 1.3.6.1.4.1.11.2.4.3.1.3 | ScalarnpSysPeripheralFatalError | read-only | current | The most recent peripheral fatal error that is being displayed on the peripheral's display panel. The error typically appears as a '80 Service (00xx)' error. R… |
| 1.3.6.1.4.1.11.2.4.3.1.4 | ScalarnpSysCardFatalError | read-only | obsolete | The most recent LAN Card error that is being displayed on the peripheral's display panel. The error typically appears as a '80 Service (01xx)' error. Refer to … |
| 1.3.6.1.4.1.11.2.4.3.1.5 | ScalarnpSysMaximumWriteBuffers | read-only | obsolete | The maximum number of write buffers configured for the LAN card (this translates to the write window size of the connection). Starting with firmware release X.… |
| 1.3.6.1.4.1.11.2.4.3.1.6 | ScalarnpSysMaximumReadBuffers | read-only | obsolete | The maximum number of read buffers configured for the LAN card (this translates to the read window size of the connection). Starting with firmware release X.20… |
| 1.3.6.1.4.1.11.2.4.3.1.7 | ScalarnpSysTotalBytesRecvs | read-only | current | The total number of bytes received since reset. |
| 1.3.6.1.4.1.11.2.4.3.1.8 | ScalarnpSysTotalBytesSents | read-only | current | The total number of bytes sent since reset. |
| 1.3.6.1.4.1.11.2.4.3.1.9 | ScalarnpSysCurrReadReq | read-only | obsolete | The current number of read data buffers owned by the LAN card. Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it pr… |
| 1.3.6.1.4.1.11.2.4.3.1.10 | ScalarnpSysModelNumber | read-only | current | The HP model number of the device. |
| 1.3.6.1.4.1.11.2.4.3.1.11 | ScalarnpSysNetworkConnectors | read-only | current | This object describes the network connectors supported by the device. The value is a bit mask. A set bit indicates the connector is supported. Bit Value Connec… |
| 1.3.6.1.4.1.11.2.4.3.1.12 | TablenpSysStatusPageTable | not-accessible | current | A table of all the lines which the card prints on the self-test page. |
| 1.3.6.1.4.1.11.2.4.3.1.12.1 | RownpSysStatusPageEntry | not-accessible | current | An entry containing one line of the status page. |
| 1.3.6.1.4.1.11.2.4.3.1.12.1.1 | ColumnnpSysStatusPageIndex | read-only | current | The index value of this entry in the table. |
| 1.3.6.1.4.1.11.2.4.3.1.12.1.2 | ColumnnpSysStatusPageText | read-only | current | The text of one line of the card status. This is the same text that is shown on the printer's selftest page. The text is localized. |
| 1.3.6.1.4.1.11.2.4.3.1.13 | ScalarnpSysManufactureInfo | read-only | current | This object provides information about the hardware that the firmware is running on as well as manufacturing codes. |
| 1.3.6.1.4.1.11.2.4.3.1.14 | ScalarnpSysPeekAddress | read-write | current | This object specifies an address for subsequent peeks. |
| 1.3.6.1.4.1.11.2.4.3.1.15 | ScalarnpSysPeek | read-only | current | This object specifies an address for subsequent peeks. |
| 1.3.6.1.4.1.11.2.4.3.1.16 | ScalarnpSysCardServices1 | read-only | current | This object is a bitmap showing what services are available on the card. Bit 0 - IPX/SPX/NCP protocol stack Bit 1 - IP/TCP protocol stack Bit 2 - LLC/DLC proto… |
| 1.3.6.1.4.1.11.2.4.3.1.17 | ScalarnpSysCardServices2 | read-only | current | This object is a bitmap showing what services are available on the card. Bit 0 - XIP2 Bit 1 - PML Get/Set Bit 2 - PML Traps Bit 3 - Scan to Web Browser Bit 4 -… |
| 1.3.6.1.4.1.11.2.4.3.1.22 | ScalarnpSysCardServices3 | read-only | current | This object is a bitmap showing what services are available on the card. Bit 0 - 100T Bit 1 - Token Ring 802.5 Bit 2 - 802.11b Bit 3 - 80211.a Bit 4 - Bluetoot… |
| 1.3.6.1.4.1.11.2.4.3.2 | ScalarnpCardPFatalErr | read-only | current | The most recent peripheral fatal error that is being displayed on the peripheral's display panel. The error typically appears as a '80 Service (00xx)' error. R… |
| 1.3.6.1.4.1.11.2.4.3.3 | ScalarnpCardIoFatalErr | read-only | obsolete | The most recent LAN Card error that is being displayed on the peripheral's display panel. The error typically appears as a '80 Service (01xx)' error. Refer to … |
| 1.3.6.1.4.1.11.2.4.3.4 | NodenpConns | |||
| 1.3.6.1.4.1.11.2.4.3.4.1 | ScalarnpConnsAccepts | read-only | current | The number of connections accepted since reset. |
| 1.3.6.1.4.1.11.2.4.3.4.2 | ScalarnpConnsRefuseds | read-only | current | The number of connections refused since reset. Connections are refused for the following reasons: a connection is already active, the peripheral is offline, th… |
| 1.3.6.1.4.1.11.2.4.3.4.3 | ScalarnpConnsDenys | read-only | current | The number of connections that the card denied due to failure to match the access list. |
| 1.3.6.1.4.1.11.2.4.3.4.4 | ScalarnpConnsDenysIP | read-only | current | The IP address of the last node to be denied a connection due to failure to match the access list. |
| 1.3.6.1.4.1.11.2.4.3.4.5 | ScalarnpConnsAborts | read-only | current | The number of connections aborted due to a network problem. |
| 1.3.6.1.4.1.11.2.4.3.4.6 | ScalarnpConnsAbortReason | read-only | current | The textual description of why the last abort on the card occurred. |
| 1.3.6.1.4.1.11.2.4.3.4.7 | ScalarnpConnsAbortIP | read-only | current | The IP address of the last node to establish a connection before the card aborted. |
| 1.3.6.1.4.1.11.2.4.3.4.8 | ScalarnpConnsAbortPort | read-only | current | The port of the last node to establish a connection before the card aborted. |
| 1.3.6.1.4.1.11.2.4.3.4.9 | ScalarnpConnsAbortTime | read-only | current | The time (in hundredths of a second) since the last time the card was aborted. |
| 1.3.6.1.4.1.11.2.4.3.4.10 | ScalarnpConnsState | read-only | current | State of current connection to card. |
| 1.3.6.1.4.1.11.2.4.3.4.11 | ScalarnpConnsIP | read-only | current | Remote IP address of the node currently connected to the card. Zero if no connection is active. |
| 1.3.6.1.4.1.11.2.4.3.4.12 | ScalarnpConnsPort | read-only | current | Remote port number of the node currently connected to the card. Zero if no connection is active. |
| 1.3.6.1.4.1.11.2.4.3.4.13 | ScalarnpConnsPeriphClose | read-only | current | The number of connections closed in response to a peripheral request I/O channel reset request. |
| 1.3.6.1.4.1.11.2.4.3.4.14 | ScalarnpConnsIdleTimeouts | read-only | current | The number of connections closed due to an idle timeout. |
| 1.3.6.1.4.1.11.2.4.3.4.15 | ScalarnpConnsNmClose | read-only | current | The number of connections closed by SetRequests to the MIB variable, npCtlCloseConnection. |
| 1.3.6.1.4.1.11.2.4.3.4.16 | ScalarnpConnsBytesRecvds | read-only | current | The number of bytes received by this connection. |
| 1.3.6.1.4.1.11.2.4.3.4.17 | ScalarnpConnsBytesSents | read-only | current | The number of bytes transmitted by this connection. |
| 1.3.6.1.4.1.11.2.4.3.5 | NodenpCfg | |||
| 1.3.6.1.4.1.11.2.4.3.5.1 | ScalarnpCfgSource | read-write | current | This object indicates how the device obtained its IP configuration. |
| 1.3.6.1.4.1.11.2.4.3.5.2 | ScalarnpCfgYiaddr | read-write | current | The IP address assigned to the card from the BOOTP reply yiaddr field. |
| 1.3.6.1.4.1.11.2.4.3.5.3 | ScalarnpCfgSiaddr | read-only | current | The IP address of the TFTP server from the BOOTP reply siaddr field. |
| 1.3.6.1.4.1.11.2.4.3.5.4 | ScalarnpCfgGiaddr | read-only | current | The IP address of the TFTP gateway from the BOOTP reply giaddr field. |
| 1.3.6.1.4.1.11.2.4.3.5.5 | ScalarnpCfgLogServer | read-write | current | The IP address of the Syslog Server. If set via BOOTP (Tag: 7 field, lg= ) then SNMP set will fail. If not set via BOOTP then SNMP set will succeed. Value save… |
| 1.3.6.1.4.1.11.2.4.3.5.6 | ScalarnpCfgSyslogFacility | read-only | current | This specifies the facility identifier used in syslog messages generated by the card. |
| 1.3.6.1.4.1.11.2.4.3.5.7 | ScalarnpCfgAccessState | read-only | current | An indication of whether or not the requesting host is allowed to connect to the card as dictated by the access list. |
| 1.3.6.1.4.1.11.2.4.3.5.8 | ScalarnpCfgAccessListNum | read-only | current | The number of access list entries. |
| 1.3.6.1.4.1.11.2.4.3.5.9 | TablenpCfgAccessListTable | not-accessible | current | List of access addresses and masks. |
| 1.3.6.1.4.1.11.2.4.3.5.9.1 | RownpCfgAccessListEntry | not-accessible | current | Each entry contains an access address and mask. |
| 1.3.6.1.4.1.11.2.4.3.5.9.1.1 | ColumnnpCfgAccessListIndex | read-only | current | Index to the configuration access list table. |
| 1.3.6.1.4.1.11.2.4.3.5.9.1.2 | ColumnnpCfgAccessListAddress | read-only | current | Address to compare with after applying the wildcard to the requestor's address. |
| 1.3.6.1.4.1.11.2.4.3.5.9.1.3 | ColumnnpCfgAccessListAddrMask | read-only | current | Address mask used to help determine whether or not a given IP address is allowed access to the card. An IP address is allowed access if (Addr & AddrMask) == (I… |
| 1.3.6.1.4.1.11.2.4.3.5.10 | ScalarnpCfgIdleTimeout | read-write | current | The idle timeout is the length in seconds after which an idle connection is terminated. A value of zero disables the timeout. Valid time values range from 1 to… |
| 1.3.6.1.4.1.11.2.4.3.5.11 | ScalarnpCfgTcpMss | read-write | current | Enumerate as follows: 0 = treat all hosts as local which means JetDirect sends a maximum of 1460 bytes of data in all outbound packets. 1 = treat hosts on diff… |
| 1.3.6.1.4.1.11.2.4.3.5.12 | ScalarnpCfgSubnetMask | read-write | current | The subnet mask associated with the IP address of this card. |
| 1.3.6.1.4.1.11.2.4.3.5.13 | ScalarnpCfgDefaultGateway | read-write | current | This variable contains the IP address of the default router for this card. |
| 1.3.6.1.4.1.11.2.4.3.5.14 | ScalarnpCfgRootURL | read-write | obsolete | The HTTP root(/) directory redirect location. |
| 1.3.6.1.4.1.11.2.4.3.5.15 | ScalarnpCfgGenURL | read-write | obsolete | The HTTP /redirect directory location. |
| 1.3.6.1.4.1.11.2.4.3.5.16 | ScalarnpCfgDomainName | read-write | obsolete | The JetDirect domain name as configured by Web JetAdmin. |
| 1.3.6.1.4.1.11.2.4.3.5.17 | ScalarnpCfgSlpTtl | read-write | current | The TTL value is used in the IP header of SLP multicast pkts sent by JetDirect. |
| 1.3.6.1.4.1.11.2.4.3.5.18 | ScalarnpCfgIPP | read-write | current | The value can be 0, meaning IPP has been disabled, or 1, meaning IPP has been enabled. |
| 1.3.6.1.4.1.11.2.4.3.5.19 | ScalarnpCfgMailServerUrl | read-write | current | The mail server to which messages originating from the JetDirect should be sent. The value is a URL in the form: protocol://address:port The protocol and port … |
| 1.3.6.1.4.1.11.2.4.3.6 | NodenpTcp | |||
| 1.3.6.1.4.1.11.2.4.3.6.1 | ScalarnpTcpInSegInOrders | read-only | current | The number of TCP segments received in order. |
| 1.3.6.1.4.1.11.2.4.3.6.2 | ScalarnpTcpInSegOutOfOrders | read-only | current | The number of TCP segments received out of order. |
| 1.3.6.1.4.1.11.2.4.3.6.3 | ScalarnpTcpInSegZeroProbes | read-only | current | The number of TCP zero window probes received. |
| 1.3.6.1.4.1.11.2.4.3.6.4 | ScalarnpTcpInDiscards | read-only | current | The number of TCP segments received that were discarded. |
| 1.3.6.1.4.1.11.2.4.3.6.9 | ScalarnpTcpTFTPFileName | read-only | current | The TFTP configuration file name. |
| 1.3.6.1.4.1.11.2.4.3.6.10 | ScalarnpTcpTFTPServerId | read-only | current | TFTP server from which configuration information is obtained. |
| 1.3.6.1.4.1.11.2.4.3.6.11 | ScalarnpTcpSyslogMax | read-write | current | Maximum number of syslog packets to be sent per minute. 0 = Disabled. |
| 1.3.6.1.4.1.11.2.4.3.6.12 | ScalarnpTcpAppSyslogPriority | read-write | current | Priority below which the syslog messages will not be sent. Valid priority levels = 0 through 7. Disabled = 8. |
| 1.3.6.1.4.1.11.2.4.3.7 | NodenpCtl | |||
| 1.3.6.1.4.1.11.2.4.3.7.1 | ScalarnpCtlReconfigIP | read-only | current | The IP address of the last node to request a reconfig of the card. This value is preserved across a reconfig. |
| 1.3.6.1.4.1.11.2.4.3.7.2 | ScalarnpCtlReconfigPort | read-only | current | The port of the last node to request a reconfig of the card. This value is preserved across a reconfig. |
| 1.3.6.1.4.1.11.2.4.3.7.3 | ScalarnpCtlReconfigTime | read-only | current | The time (in hundredths of a second) since the last time the card was reconfigured. |
| 1.3.6.1.4.1.11.2.4.3.7.4 | ScalarnpCtlCloseIP | read-only | current | The IP address of the last node to request a close of the peripheral data connection on the card. This value is cleared on a reconfig. |
| 1.3.6.1.4.1.11.2.4.3.7.5 | ScalarnpCtlClosePort | read-only | current | The port of the last node to request a close of the peripheral data connection on the card. This value is cleared on a reconfig. |
| 1.3.6.1.4.1.11.2.4.3.7.6 | ScalarnpCtlImageDump | read-write | obsolete | Writing a one (1) to this variable causes the card to dump its RAM image into a file using TFTP. The file is dumped onto the BOOTP server machine whose IP addr… |
| 1.3.6.1.4.1.11.2.4.3.7.7 | ScalarnpCtlCloseConnection | read-write | current | Writing a one (1) to this variable causes the card to close the current peripheral data connection |
| 1.3.6.1.4.1.11.2.4.3.7.8 | ScalarnpCtlReconfig | read-write | current | Writing any value to this variable causes the card to reconfigure itself by doing the BOOTP/TFTP configuration activity. |
| 1.3.6.1.4.1.11.2.4.3.7.9 | ScalarnpCtlProtocolSet | read-write | current | This is a 4 byte integer value. The least significant bytes represent the protocols on the card. A value of '1' indicates a protocol that is enabled. A value o… |
| 1.3.6.1.4.1.11.2.4.3.7.10 | ScalarnpCtlStatusPageLang | read-write | current | This object specifies the PDL used to print the status page. EX ONLY |
| 1.3.6.1.4.1.11.2.4.3.7.11 | ScalarnpCtlPrintStatusPage | read-write | current | Writing any value to this object causes the device to print a status page. EX ONLY |
| 1.3.6.1.4.1.11.2.4.3.7.12 | ScalarnpCtlErrorBehavior | read-write | current | This object provides management capability to specify various error/panic/reset modes as are enumerated above. Default is halt_without-dump(4). |
| 1.3.6.1.4.1.11.2.4.3.7.13 | ScalarnpCtlCrcControl | read-write | current | This object controls and manages the collection of crc data for paperless print testing. |
| 1.3.6.1.4.1.11.2.4.3.7.14 | ScalarnpCtlSNMPEnableDisable | read-write | current | 0 - disable SNMP Disable the SNMP protocol on the JetDirect device. Once SNMP is disabled it will not be possible to enable SNMP via another SNMP request, or e… |
| 1.3.6.1.4.1.11.2.4.3.7.15 | ScalarnpCtlStatusPageLangMask | read-write | current | This object specifies the Page Description Language (PDL) used to print the status page. It is a bit mask as follows: pcl = 1 ascii = 2 postscript = 4 hpgl2 = … |
| 1.3.6.1.4.1.11.2.4.3.7.16 | ScalarnpCtlBpDisableLCB | read-write | current | This object will disable (0) or enable (1) LCB (Logical Channel Break). |
| 1.3.6.1.4.1.11.2.4.3.7.17 | ScalarnpCtlTknobCommandRequest | read-write | current | A tuning knob command is processed when this object is set with specific requests. Any response from the tuning knob command is made available via npCtlTknobCo… |
| 1.3.6.1.4.1.11.2.4.3.7.18 | ScalarnpCtlTknobCommandResponse | read-only | current | A tuning knob command is processed when npCtlTknobCommandRequest is set with specific requests. Any response from the tuning knob command is made available via… |
| 1.3.6.1.4.1.11.2.4.3.7.19 | ScalarnpCtlTelnet | read-write | current | Configure Telnet service. (0) = Telnet disabled (1) = Telnet enabled |
| 1.3.6.1.4.1.11.2.4.3.7.20 | ScalarnpCtlFTP | read-write | current | Configure File Transfer Protocol (FTP) service. (0) = Both FTP Print and Download Disabled (1) = Both FTP Print and Download Enabled (2) = FTP Print Enabled an… |
| 1.3.6.1.4.1.11.2.4.3.7.21 | ScalarnpCtlSLP | read-write | current | Configure Service Location Protocol (SLP) service. (0) = SLP disabled (1) = SLP enabled |
| 1.3.6.1.4.1.11.2.4.3.7.22 | ScalarnpCtlLPD | read-write | current | Configure Line Printer Daemon Protocol (LPD) service. (0) = LPD disabled (1) = LPD enabled |
| 1.3.6.1.4.1.11.2.4.3.7.24 | ScalarnpCtl9100 | read-write | current | Configure TCP port 9100 printing. (0) = port 9100 printing disabled (1) = port 9100 printing enabled |
| 1.3.6.1.4.1.11.2.4.3.7.26 | ScalarnpCtlSysLog | read-write | current | Configure Syslog service. (0) = Syslog service disabled (1) = Syslog service enabled Enabled by default. |
| 1.3.6.1.4.1.11.2.4.3.7.27 | ScalarnpCtlSnmpVersionAccess | read-write | current | Manages an SNMP version's read and write access to the MIB. |
| 1.3.6.1.4.1.11.2.4.3.7.28 | ScalarnpCtlSnmpV3InitAccount | read-write | current | Used to create initial SNMPv3 account. The following rules apply: 0 = clear init account, only if previously 0. 4 = Block init account, only cold reset will cl… |
| 1.3.6.1.4.1.11.2.4.3.7.29 | ScalarnpCtlBonjour | read-write | current | Configure Multicast Domain Name Service. (0) = Bonjour disabled (1) = Bonjour enabled |
| 1.3.6.1.4.1.11.2.4.3.7.32 | ScalarnpCtlNetworkConnectionMode | read-write | current | This object controls the selection of the active network interface used for communication. This is applicable to products supporting dual wired and wireless ne… |
| 1.3.6.1.4.1.11.2.4.3.7.34 | ScalarnpCtlIPSecurityPolicy | read-write | current | Disable IP Security (IPSec) or Firewall. Only disabling is allowed. |
| 1.3.6.1.4.1.11.2.4.3.7.36 | ScalarnpCtlWSDiscovery | read-write | current | Web Services Discovery enable/disable. |
| 1.3.6.1.4.1.11.2.4.3.7.37 | ScalarnpCtlWSPrint | read-write | current | Web Services Print enable/disable. |
| 1.3.6.1.4.1.11.2.4.3.7.38 | ScalarnpCtlLLMNR | read-write | current | Link-Local Multicast Name Resolution( LLMNR ) enable/disable. |
| 1.3.6.1.4.1.11.2.4.3.7.47 | ScalarnpCtlFpDot11WirelessState | read-write | current | Use for enabling and disabling Wireless Radio. The following values are defined: Disable = 0 Enable = 1 Default = 1(Enabled) |
| 1.3.6.1.4.1.11.2.4.3.7.57 | ScalarnpCtlWiFiDirectSSIDBroadcast | read-write | current | This is used to allow or hide broadcasting of the SSID (Network name). Allowed(Default) = 1 Not Allowed = 0 Not Allowed (0) only takes effect when npCfgWiFiDir… |
| 1.3.6.1.4.1.11.2.4.3.7.58 | ScalarnpCtlWiFiDirectHidePassphrase | read-write | optional | This controls display of the Wireless passphrase on configuration reports/pages or on the control panel. Show = 0 Hide = 1 This object also controls whether or… |
| 1.3.6.1.4.1.11.2.4.3.7.59 | ScalarnpCtlWiFiDirectHideSsid | read-write | optional | This controls display of the network name (SSID) on configuration reports/pages or on the control panel. Show = 0 Hide = 1 Hide (1) only takes effect when npCf… |
| 1.3.6.1.4.1.11.2.4.3.7.68 | ScalarnpCtlAirPrintStatus | read-write | current | Use to Enabled/Disabled AirPrint functionality. Disable = 0 Enable(Default) = 1 |
| 1.3.6.1.4.1.11.2.4.3.7.70 | ScalarnpCtlAllowRFC5746TLS-SSLCompatibilityMode | read-write | current | Added to support RFC-5746. This OID can be use to enable/disable legacy SSL renegotiation. Disable = 0 Enable(Default) = 1 |
| 1.3.6.1.4.1.11.2.4.3.7.74 | ScalarnpCtlWiFiDirectState | read-write | current | Configure 802.11 Wireless/Wi-Fi Direct functionality 0 = Wireless/Wi-Fi Direct is disabled 1 = Wireless/Wi-Fi Direct is enabled |
| 1.3.6.1.4.1.11.2.4.3.7.79 | ScalarnpCtlAirScan | read-write | current | Used to Enable/Disable the AirScan service. Disable = 0 Enable (Default) = 1 |
| 1.3.6.1.4.1.11.2.4.3.7.80 | ScalarnpCtlAirFax | read-write | current | Used to Enable/Disable the AirFax service. Disable = 0 Enable (Default) = 1 |
| 1.3.6.1.4.1.11.2.4.3.8 | NodenpNpi | |||
| 1.3.6.1.4.1.11.2.4.3.8.1 | NodenpNpiCardStatusEntry | |||
| 1.3.6.1.4.1.11.2.4.3.8.1.1 | ScalarnpNpiCseDataState | read-only | obsolete | The data state of the LAN card. Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it provides no relevant data for the… |
| 1.3.6.1.4.1.11.2.4.3.8.1.2 | ScalarnpNpiCseErrorCode | read-only | obsolete | The LAN card's error code. Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it provides no relevant data for the new … |
| 1.3.6.1.4.1.11.2.4.3.8.1.3 | ScalarnpNpiCseLinkEvent | read-only | obsolete | The LAN link event (reset or initialized or triggered). Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it provides … |
| 1.3.6.1.4.1.11.2.4.3.8.1.4 | ScalarnpNpiCseReadMode | read-only | obsolete | The state of the LAN card's read channel (operate or idle). Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it provi… |
| 1.3.6.1.4.1.11.2.4.3.8.1.5 | ScalarnpNpiCseWriteMode | read-only | obsolete | The state of the LAN card's write channel (operate or idle). Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it prov… |
| 1.3.6.1.4.1.11.2.4.3.8.1.6 | ScalarnpNpiCseWarningCode | read-only | current | This indicates that the LAN card channel zero has encountered an error condition which isn't serious enough to shut the peripheral down, but should be checked … |
| 1.3.6.1.4.1.11.2.4.3.8.1.7 | ScalarnpNpiCseConnectionState | read-only | obsolete | Indicates whether or not the peripheral is currently connected to a server. Starting with firmware release X.20.06 and subsequent releases, this object is obso… |
| 1.3.6.1.4.1.11.2.4.3.8.1.8 | ScalarnpNpiCseNovWarningCode | read-only | current | This indicates that the Novell stack has encountered an error condition which isn't serious enough to shut the peripheral down, but should be checked out. |
| 1.3.6.1.4.1.11.2.4.3.8.1.9 | ScalarnpNpiCseLlcWarningCode | read-only | current | This indicates that the LLC stack has encountered an error condition which isn't serious enough to shut the peripheral down, but should be checked out. |
| 1.3.6.1.4.1.11.2.4.3.8.1.10 | ScalarnpNpiCseTcpWarningCode | read-only | current | This indicates that the TCP stack has encountered an error condition which isn't serious enough to shut the peripheral down, but should be checked out. |
| 1.3.6.1.4.1.11.2.4.3.8.1.11 | ScalarnpNpiCseAtkWarningCode | read-only | current | This indicates that the AppleTalk stack has encountered an error condition which isn't serious enough to shut the peripheral down, but should be checked out. |
| 1.3.6.1.4.1.11.2.4.3.8.2 | ScalarnpNpiPeripheralAttributeCount | read-only | current | The number of valid bytes of peripheral attributes received from the peripheral. |
| 1.3.6.1.4.1.11.2.4.3.8.3 | NodenpNpiPeripheralAttributeEntry | |||
| 1.3.6.1.4.1.11.2.4.3.8.3.1 | ScalarnpNpiPaeLinkDirection | read-only | obsolete | The directions that the peripheral is able to transfer data (read and write channels, read channel only, or write channel only). Starting with firmware release… |
| 1.3.6.1.4.1.11.2.4.3.8.3.2 | ScalarnpNpiPaeClass | read-only | current | The class assigned to the peripheral onto which this card is plugged. |
| 1.3.6.1.4.1.11.2.4.3.8.3.3 | ScalarnpNpiPaeIdentification | read-only | current | The Identification number of the peripheral. These values are defined in the MIO spec. DesignJet, PaintJet XL300, and DesignJet/600 peripherals will identify t… |
| 1.3.6.1.4.1.11.2.4.3.8.3.4 | ScalarnpNpiPaeRevision | read-only | obsolete | The revision number of the peripheral. Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it provides no relevant data … |
| 1.3.6.1.4.1.11.2.4.3.8.3.5 | ScalarnpNpiPaeAppleTalk | read-only | current | Indicates the peripheral supports functionality that the apple talk protocol network provides. |
| 1.3.6.1.4.1.11.2.4.3.8.3.6 | ScalarnpNpiPaeMessage | read-only | obsolete | Reserved for future use. Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it provides no relevant data for the new ha… |
| 1.3.6.1.4.1.11.2.4.3.8.3.7 | ScalarnpNpiPaeReserved | read-only | obsolete | This field is an unused byte. Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it provides no relevant data for the n… |
| 1.3.6.1.4.1.11.2.4.3.8.3.8 | ScalarnpNpiPaeMultichanFlag | read-only | current | An indication of how many MIO channels the peripheral supports. |
| 1.3.6.1.4.1.11.2.4.3.8.3.9 | ScalarnpNpiPaeDatagramFlag | read-only | current | An indication of how many MIO datagram channels the peripheral supports. |
| 1.3.6.1.4.1.11.2.4.3.8.4 | NodenpNpiCardAttributeEntry | |||
| 1.3.6.1.4.1.11.2.4.3.8.4.1 | ScalarnpNpiCaeLinkDirection | read-only | obsolete | The directions that this particular network peripheral card is able to transfer data (read and write, read only or write only). Starting with firmware release … |
| 1.3.6.1.4.1.11.2.4.3.8.4.2 | ScalarnpNpiCaeClass | read-only | current | The class of this network peripheral card. |
| 1.3.6.1.4.1.11.2.4.3.8.4.3 | ScalarnpNpiCaeIdentification | read-only | current | The identification number assigned this network peripheral card. |
| 1.3.6.1.4.1.11.2.4.3.8.4.4 | ScalarnpNpiCaeRevision | read-only | obsolete | The revision number of the network peripheral connection card code on this card. Starting with firmware release X.20.06 and subsequent releases, this object is… |
| 1.3.6.1.4.1.11.2.4.3.8.4.5 | ScalarnpNpiCaeAppleTalk | read-only | current | Indicates that the card supports the apple talk protocol network. |
| 1.3.6.1.4.1.11.2.4.3.8.4.6 | ScalarnpNpiCaeMessage | read-only | obsolete | Indicates that the card supports the messaging mode protocol. Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it pro… |
| 1.3.6.1.4.1.11.2.4.3.8.4.7 | ScalarnpNpiCaeReserved | read-only | obsolete | Reserved object for future use. Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it provides no relevant data for the… |
| 1.3.6.1.4.1.11.2.4.3.8.4.8 | ScalarnpNpiCaeMultichan | read-only | obsolete | An indication of how many MIO channels the I/O card supports. Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it pro… |
| 1.3.6.1.4.1.11.2.4.3.8.4.9 | ScalarnpNpiCaeDatagram | read-only | obsolete | An indication of how many MIO datagram channels the I/O card supports. Starting with firmware release X.20.06 and subsequent releases, this object is obsolete … |
| 1.3.6.1.4.1.11.2.4.3.9 | NodenpElt | |||
| 1.3.6.1.4.1.11.2.4.3.9.1 | TablenpEltErrorLogTable | not-accessible | obsolete | The LAN card's error log. |
| 1.3.6.1.4.1.11.2.4.3.9.1.1 | RownpEltErrorLogEntry | not-accessible | obsolete | The LAN card's error log table entries. |
| 1.3.6.1.4.1.11.2.4.3.9.1.1.1 | ColumnnpEltErrIndex | read-only | obsolete | The index that uniquely identifies an error log entry. Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it provides n… |
| 1.3.6.1.4.1.11.2.4.3.9.1.1.2 | ColumnnpEltErrErrorId | read-only | obsolete | Identification for this error. Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it provides no relevant data for the … |
| 1.3.6.1.4.1.11.2.4.3.9.1.1.3 | ColumnnpEltErrErrorParam | read-only | obsolete | Error Parameter value. Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it provides no relevant data for the new hard… |
| 1.3.6.1.4.1.11.2.4.3.9.1.1.4 | ColumnnpEltErrTimeStamp | read-only | obsolete | Time in timer ticks when error log entry was made. Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it provides no re… |
| 1.3.6.1.4.1.11.2.4.3.10 | NodenpIpx | |||
| 1.3.6.1.4.1.11.2.4.3.10.1 | ScalarnpIpxGetUnitCfgResp | read-only | current | This object is the Get Unit Config Response structure described in the IPX code. This structure is of variable length depending on how many servers are configu… |
| 1.3.6.1.4.1.11.2.4.3.10.2 | ScalarnpIpx8022frametype | read-only | current | The number of IPX FT8022 frames received. |
| 1.3.6.1.4.1.11.2.4.3.10.3 | ScalarnpIpxSNAPframetype | read-only | current | The number of IPX FTSNAP frames received. |
| 1.3.6.1.4.1.11.2.4.3.10.4 | ScalarnpIpxEthernetframetype | read-only | current | The number of IPX FTEthernet frames received. |
| 1.3.6.1.4.1.11.2.4.3.10.5 | ScalarnpIpx8023Rawframetype | read-only | current | The number of IPX FT8023RAW frames received. |
| 1.3.6.1.4.1.11.2.4.3.10.6 | ScalarnpIpxSapInfo | read-only | current | This is a 50 byte array that contains the following information. 2 bytes: bindery object type (always 030c in hi-lo order) 12 bytes: Mac address of card (ASCII… |
| 1.3.6.1.4.1.11.2.4.3.10.7 | ScalarnpIpxGetUnitCfgResp2 | read-only | current | This object is the Get Unit Config Response structure described in the IPX code. This structure is of variable length depending on how many servers are configu… |
| 1.3.6.1.4.1.11.2.4.3.10.8 | ScalarnpIpxUnitName | read-write | current | This is the name by which the device advertises over NetWare. In remote printer mode, this is referred to as the node name. In queue server mode this name doub… |
| 1.3.6.1.4.1.11.2.4.3.10.9 | ScalarnpIpxNdsTreeName | read-write | current | This is the name of the NDS tree by which the JetDirect attempts to connect and authenticate. NDS support is enabled when this value is provided (although conn… |
| 1.3.6.1.4.1.11.2.4.3.10.10 | NodenpIpxNdsFullyQualifiedName | |||
| 1.3.6.1.4.1.11.2.4.3.10.10.1 | ScalarnpIpxNdsFullyQualifiedName1 | read-write | current | The length and the first 128 characters of the NDS fully qualified print server name. |
| 1.3.6.1.4.1.11.2.4.3.10.10.2 | ScalarnpIpxNdsFullyQualifiedName2 | read-write | current | The rest of the NDS fully qualified print server name. This is the continuation of npIpxNdsFullyQualifiedName1 for names longer than 128 characters. The value … |
| 1.3.6.1.4.1.11.2.4.3.10.11 | TablenpIpxServerConnTable | not-accessible | current | A list of npIpxServerConn entries. |
| 1.3.6.1.4.1.11.2.4.3.10.11.1 | RownpIpxServerConnEntry | not-accessible | current | An entry contains the status of a file server connection. Each entry indicates the file server dynamically connected in the given slot, the connection status, … |
| 1.3.6.1.4.1.11.2.4.3.10.11.1.1 | ColumnnpIpxServerConnIndex | read-only | current | The index value which uniquely identifies the server connection to which this entry is applicable. |
| 1.3.6.1.4.1.11.2.4.3.10.11.1.2 | ColumnnpIpxServerConnMode | read-only | current | The operating mode of the server. |
| 1.3.6.1.4.1.11.2.4.3.10.11.1.3 | ColumnnpIpxServerConnName | read-write | current | The name of the server. |
| 1.3.6.1.4.1.11.2.4.3.10.11.1.4 | ColumnnpIpxServerConnStatus | read-only | current | The RCFG connection status of the server. |
| 1.3.6.1.4.1.11.2.4.3.10.11.1.5 | ColumnnpIpxServerConnNcpStatus | read-only | current | The last NCP code of the server. |
| 1.3.6.1.4.1.11.2.4.3.10.11.1.6 | ColumnnpIpxServerConnNdsStatus | read-only | current | The last NDS code of the server. |
| 1.3.6.1.4.1.11.2.4.3.10.12 | NodenpIpxObsoleteServerConnInfo | |||
| 1.3.6.1.4.1.11.2.4.3.10.12.1 | ScalarnpIpxObsoleteServerConnInfo1 | read-only | deprecated | This object contains a list of 8 structures that refer to the status of the first eight file server connection slot entries. Each entry indicates the file serv… |
| 1.3.6.1.4.1.11.2.4.3.10.12.2 | ScalarnpIpxObsoleteServerConnInfo2 | read-only | deprecated | The server connection info for slots 9-16. See above for format. |
| 1.3.6.1.4.1.11.2.4.3.10.13 | ScalarnpIpxRcfgAddress | read-only | current | The 12 octet IPX address of the Novell RCFG socket. The address is in network byte order. |
| 1.3.6.1.4.1.11.2.4.3.10.14 | ScalarnpIpxRcfgRemotePrintServerName | read-write | current | Remote print server name. |
| 1.3.6.1.4.1.11.2.4.3.10.15 | ScalarnpIpxRcfgRemotePrinterNumber | read-write | current | remote Printer Number (valid in remote Printer Mode only) range: 0-255 for 4.X servers 0-15 for 3.X servers |
| 1.3.6.1.4.1.11.2.4.3.10.16 | ScalarnpIpxRestart | read-write | current | Setting of this object to zero causes a soft reset of the board, setting to one causes a hard reset of the board. |
| 1.3.6.1.4.1.11.2.4.3.10.17 | ScalarnpIpxSourceRoute | read-write | current | This object provides control/status for source route. Options for Token Ring networks are as follows: 00 - Auto Sensing mode 01 - Send without SR, receive only… |
| 1.3.6.1.4.1.11.2.4.3.10.18 | ScalarnpIpxFrameType | read-write | current | This object returns the frame type current enabled, possibilities are as follows: 00 - Auto 01 - Ethernet 8023 or Token-ring 02 - Ethernet II or Token-ring SNA… |
| 1.3.6.1.4.1.11.2.4.3.10.19 | ScalarnpIpxJobPollInterval | read-write | current | Queue server job poll interval. |
| 1.3.6.1.4.1.11.2.4.3.10.20 | ScalarnpIpxSapBroadcastInterval | read-write | current | Currently effective SAP broadcast Interval: range: 0-3600 seconds default: 60 seconds 0 value indicates SAP broadcasts are disabled. |
| 1.3.6.1.4.1.11.2.4.3.10.21 | ScalarnpIpxPjlEnableFlag | read-write | current | Currently effective PJL Enable Flag, possible values include: 00 - PJL disable 01 - PJL Job, banner 02 - Ustatus for end of job detection 03 - banners and end … |
| 1.3.6.1.4.1.11.2.4.3.10.22 | ScalarnpIpxTonerLowNotification | read-write | current | Current Configuration for toner low notification. Possible values include: 00 - notify only if intervention is required. 01 - Notify even if peripheral is stil… |
| 1.3.6.1.4.1.11.2.4.3.10.23 | ScalarnpIpxNetNumber | read-only | current | Current Ipx network number. |
| 1.3.6.1.4.1.11.2.4.3.11 | NodenpDm | |||
| 1.3.6.1.4.1.11.2.4.3.11.1 | ScalarnpDmConnSupp | read-only | current | This is the number of current active Direct Mode connections. |
| 1.3.6.1.4.1.11.2.4.3.11.2 | ScalarnpDmConnAvail | read-only | current | This is the number of Direct Mode connections available. |
| 1.3.6.1.4.1.11.2.4.3.11.3 | ScalarnpDmProtSupp | read-only | current | This is a bit string that contains a list of protocols over which DirectMode is supported. A specified bit represents each protocol statck. Support for more th… |
| 1.3.6.1.4.1.11.2.4.3.11.4 | ScalarnpDmServerInfo1 | read-only | current | This object shows the address of the server that is connected to the DirectMode slot. This structure returns AT_AVAIL if there is no server attached to this sl… |
| 1.3.6.1.4.1.11.2.4.3.12 | Nodellcconstategroup | |||
| 1.3.6.1.4.1.11.2.4.3.12.1 | ScalarllcN2Value | read-only | current | This is the value of the N2 variable used in the 802.2 type II connection. This value is the number of retransmissions that could occur if a host peer is not r… |
| 1.3.6.1.4.1.11.2.4.3.12.7 | ScalarllcConnectionstate | read-only | current | This is the llc connection state for Lan Manager and Lan Server. 1 - bp or fp or both disabled: not accepting connections 2 - have bp connection and fp listeni… |
| 1.3.6.1.4.1.11.2.4.3.12.8 | ScalarnpLlcServerAddress | read-only | current | This is the LLC server address for Lan Manager and Lan Server. |
| 1.3.6.1.4.1.11.2.4.3.13 | NodenpPort | |||
| 1.3.6.1.4.1.11.2.4.3.13.1 | ScalarnpPortNumPorts | read-only | current | The number of peripheral interfaces supported by this device. |
| 1.3.6.1.4.1.11.2.4.3.13.2 | ScalarnpPortType | read-only | current | The type of the peripheral interface. A parallel port will return the specific protocol currently in use. If the parallel port is disconnected it will return p… |
| 1.3.6.1.4.1.11.2.4.3.13.3 | ScalarnpPortDesiredMode | read-write | current | The desired (remotely specified) operating mode of the parallel port. The following map is used to determine mode availability and provides the definition for … |
| 1.3.6.1.4.1.11.2.4.3.13.4 | ScalarnpPortCentronicsHandshaking | read-write | current | The handshaking to be used in sending data over the parallel port. EX-ONLY |
| 1.3.6.1.4.1.11.2.4.3.13.5 | ScalarnpPortStatusLines | read-only | current | The state of the centronics status lines from the peripheral. The value is a bit mask. Bit Value Signal 0 0x01 nACK 1 0x02 2 0x04 3 0x08 4 0x10 nFAULT 5 0x20 S… |
| 1.3.6.1.4.1.11.2.4.3.13.6 | ScalarnpPortMaxModeAvaliable | read-only | current | The maximum available parallel mode by which the print-server may connect to an attached peripheral. This is a function of the the available hardware and firmw… |
| 1.3.6.1.4.1.11.2.4.3.13.7 | ScalarnpPortBidiPollRate | read-write | current | Poll rate for bi-directional data. Range is 10 to 100 seconds. Defaults to 40 seconds. EX-ONLY |
| 1.3.6.1.4.1.11.2.4.3.13.8 | ScalarnpPortSetCentronicsTiming | read-write | current | Takes the 16 bit value and applies it to the centronics timing register. The default value is 0 and is not applied to the centronics timing register. EX-ONLY |
| 1.3.6.1.4.1.11.2.4.3.13.9 | ScalarnpPortSetIoFlags | read-write | current | Sets and/or disables IO flags. Reset value of 0. EX-ONLY |
| 1.3.6.1.4.1.11.2.4.3.13.10 | ScalarnpPortSetEcpHostRecTimer | read-write | current | Takes the 16 bit value and applies it to the Host Recovery Time Register. The default value is 0. EX-ONLY |
| 1.3.6.1.4.1.11.2.4.3.13.11 | ScalarnpPortSetIoFlags2 | read-write | current | Sets and/or disables IO flags. Reset value of 0. EX-ONLY |
| 1.3.6.1.4.1.11.2.4.3.13.12 | ScalarnpPortUsbDesiredMode | read-write | current | The desired operating mode of the USB interface to this device. JetDirect normally uses the best interface the device supports. Setting this object limits the … |
| 1.3.6.1.4.1.11.2.4.3.13.13 | ScalarnpPortUsbCurrentMode | read-only | current | The current operating mode of the USB interface to this device. unknown = unknown or no device connected unidirectional = forward data only (USB class 7.1.1) b… |
| 1.3.6.1.4.1.11.2.4.3.13.14 | ScalarnpPortUsbProduct | read-only | current | The product string (if any) returned by the current USB device on this port. |
| 1.3.6.1.4.1.11.2.4.3.13.15 | ScalarnpPortUsbManufacturer | read-only | current | The manufacturer string (if any) returned by the current USB device on this port. |
| 1.3.6.1.4.1.11.2.4.3.13.16 | ScalarnpPortUsbSerialNumber | read-only | current | The serial number string (if any) returned by the current USB device on this port. |
| 1.3.6.1.4.1.11.2.4.3.14 | NodenpXip | |||
| 1.3.6.1.4.1.11.2.4.3.14.1 | ScalarxipActive | read-only | current | This indicates whether the card and peripheral support XIP and at least one of the protocol stacks is enabled (TCP or IPX). |
| 1.3.6.1.4.1.11.2.4.3.15 | NodenpCRC | |||
| 1.3.6.1.4.1.11.2.4.3.15.1 | TablenpCRCTable | not-accessible | current | |
| 1.3.6.1.4.1.11.2.4.3.15.1.1 | RownpCRCEntry | not-accessible | current | |
| 1.3.6.1.4.1.11.2.4.3.15.1.1.1 | ColumnnpCRCIndex | read-only | current | |
| 1.3.6.1.4.1.11.2.4.3.15.1.1.2 | ColumnnpCRCText | read-only | current | |
| 1.3.6.1.4.1.11.2.4.3.15.1.1.3 | ColumnnpCRCChannel | read-only | current | |
| 1.3.6.1.4.1.11.2.4.3.16 | NodenpDhcp | |||
| 1.3.6.1.4.1.11.2.4.3.16.1 | ScalarnpDHCPconfig | read-write | obsolete | This object allows a user to enable or disable configuration via DHCP. If DHCP is disabled, bootp is used for configuration. Supported in firmware revisions be… |
| 1.3.6.1.4.1.11.2.4.3.16.2 | ScalarnpDHCPserver | read-only | current | IP address of DHCP server that provided this unit with an IP address via the DHCP protocol. |
| 1.3.6.1.4.1.11.2.4.3.17 | NodenpScan | |||
| 1.3.6.1.4.1.11.2.4.3.17.1 | ScalarnpScanIdleTimeout | read-write | current | The idle timeout is the length in seconds after which an idle connection is terminated. A value of zero disables the timeout. Valid time values range from 1 to… |
| 1.3.6.1.4.1.11.2.4.3.17.2 | ScalarnpScanTimeRemaining | read-only | current | The time remaining, in seconds, until the current connection's lock expires. Once a connection's lock expires, JetDirect will terminate it if another connect r… |
| 1.3.6.1.4.1.11.2.4.3.17.3 | ScalarnpScanCurrentAddr | read-only | current | The remote address of the current scan connection. The format is a sockaddr structure containing an IP or IPX address. |
| 1.3.6.1.4.1.11.2.4.3.17.4 | ScalarnpScanCurrentName | read-write | current | Human readable name of the current scan client. This object is a scratchpad for client software to provide the current user name so that other clients can incl… |
| 1.3.6.1.4.1.11.2.4.3.17.5 | ScalarnpScanStatus | read-only | current | Current status of scanner. Status values TBD. |
| 1.3.6.1.4.1.11.2.4.3.17.10 | ScalarnpMFPFeaturesSupported | read-only | current | A bitmap of which MFP support features are present in this JetDirect. The bits are: bit 0 = JetDirect scan gateway, bit 1 = JetDirect generic gateway, bit 2 = … |
| 1.3.6.1.4.1.11.2.4.3.18 | NodenpWeb | |||
| 1.3.6.1.4.1.11.2.4.3.18.1 | ScalarembeddedWebCfg | read-only | obsolete | Functionality provided by embedded web server (ews). 0 = no ews 1 = ews on JetDirect for JetDirect status/configuration 4 = ews on JetDirect for scanner status… |
| 1.3.6.1.4.1.11.2.4.3.18.2 | ScalarwjaFrameworkURL | read-write | current | Set by a present WJA system. Once set, the WJD user interface will add a framework link from the WJD navigation bar. This link will allow user navigation to th… |
| 1.3.6.1.4.1.11.2.4.3.18.3 | ScalarwjaFrameworkName | read-write | current | Used by WJA systems as a scratch pad location for communication of current wja name. Name will be truncated to 64 characters. |
| 1.3.6.1.4.1.11.2.4.3.18.4 | ScalarextFrameworkURL | read-write | current | Set by a present external system. Once set, the WJD user interface will add a framework link from the WHD navigation bar. This link will allow user navigation … |
| 1.3.6.1.4.1.11.2.4.3.18.5 | ScalarextFrameworkName | read-write | current | Used by external systems as a scratch pad location for communication of current wja name. Name will be truncated to 64 characters. |
| 1.3.6.1.4.1.11.2.4.3.18.6 | ScalarippUrl | read-write | current | Used by Internet Printing Protocol managers to define current URL. Maximum length of the url must be less than 255 bytes. |
| 1.3.6.1.4.1.11.2.4.3.18.12 | ScalarnpWebProxyServerId | read-write | current | IP address or hostname of web proxy server. |
| 1.3.6.1.4.1.11.2.4.3.18.13 | ScalarnpWebProxyServerPort | read-write | current | IP port of web proxy server |
| 1.3.6.1.4.1.11.2.4.3.18.14 | ScalarnpWebProxyUserName | read-write | current | Proxy web user identification |
| 1.3.6.1.4.1.11.2.4.3.18.15 | ScalarnpWebProxyUserPasswd | read-write | current | Proxy web user password |
| 1.3.6.1.4.1.11.2.4.3.18.17 | ScalarnpWebCheckACLforHTTP | read-write | current | Configure checking of HTTP web connections against Access Control List. (0) = Disable ACL checking (1) = Enable ACL checking |
| 1.3.6.1.4.1.11.2.4.3.19 | NodenpAtk | |||
| 1.3.6.1.4.1.11.2.4.3.19.1 | ScalarnpAtkInitOrReady | read-only | current | Reports whether AppleTalk is initializing or ready. Initializing > 0 Ready = 0 |
| 1.3.6.1.4.1.11.2.4.3.19.2 | ScalarnpAtkStatus | read-only | current | Reports the status of the AppleTalk stack. Currently, if the stack is up 'Ready' is returned if it is down 'NOT IN USE' is returned. The strings returned may c… |
| 1.3.6.1.4.1.11.2.4.3.19.3 | TablenpAtkNetConfigTable | not-accessible | current | A table of AppleTalk network configuration information. |
| 1.3.6.1.4.1.11.2.4.3.19.3.1 | RownpAtkNetConfigEntry | not-accessible | current | Each row of the table gives the configuratin information for an entity bound to a socket |
| 1.3.6.1.4.1.11.2.4.3.19.3.1.1 | ColumnnpAtkNetConfigName | read-only | current | AppleTalk Name of the Peripheral. The actual peripheral name stored on the periperal is used as the AppleTalk node name. |
| 1.3.6.1.4.1.11.2.4.3.19.3.1.2 | ColumnnpAtkNetConfigZone | read-only | current | Apple Talk Zone to which the periphral belongs. A zone is an arbitrary subset of nodes within an AppleTalk internet. |
| 1.3.6.1.4.1.11.2.4.3.19.3.1.3 | ColumnnpAtkNetConfigType | read-only | current | The type associated with the socket. This is meant to be a useful description of what process is bound to the socket. ie LaserWriter print aplication, SNMP Age… |
| 1.3.6.1.4.1.11.2.4.3.19.3.1.4 | ColumnnpAtkNetConfigNet | read-only | current | The AppleTalk network to which the node is connected. |
| 1.3.6.1.4.1.11.2.4.3.19.3.1.5 | ColumnnpAtkNetConfigNode | read-only | current | The number assigned to this entity to uniquely identify it on the AppleTalk network. |
| 1.3.6.1.4.1.11.2.4.3.19.3.1.6 | ColumnnpAtkNetConfigSocket | read-only | current | A socket is an addressable entity within a node connected to an AppleTalk network. The entity may be AppleTalk software process or other clients such as: Laser… |
| 1.3.6.1.4.1.11.2.4.3.19.3.1.7 | ColumnnpAtkNetConfigIndex | not-accessible | current | A unique value for each AppleTalk configuration interface. |
| 1.3.6.1.4.1.11.2.4.3.20 | NodenpSecurity | |||
| 1.3.6.1.4.1.11.2.4.3.20.1 | ScalarnpSecurityDot11ServerAuthentication | read-write | current | Server-Based Authentication with the following bitwise values: None(0), EAP-MD5(1), EAP-TLS(2), LEAP(4), PEAP(8), TTLS(16) |
| 1.3.6.1.4.1.11.2.4.3.20.2 | ScalarnpSecurityDot1xEapMd5Identity | read-write | current | Radius MD5 authentication User Name. |
| 1.3.6.1.4.1.11.2.4.3.20.3 | ScalarnpSecurityDot1xTLSAuthServerId | read-write | current | TLS authentication Server ID. |
| 1.3.6.1.4.1.11.2.4.3.20.4 | ScalarnpSecurityPublicKey | read-only | current | The public key of a public/private key pair to be used by applications to set encrypted values. |
| 1.3.6.1.4.1.11.2.4.3.20.5 | ScalarnpSecurityDot11EncryptedDot11NetworkName | read-write | current | The encrypted network name (SSID). Use the npSecurityPublicKey to encrypt this value. Setting this object will cause the card to reconfigure. |
| 1.3.6.1.4.1.11.2.4.3.20.6 | ScalarnpSecurityDot11EncryptedDot1xEapMd5Secret | read-write | current | The encrypted dot1xEapMD5Secret authentication password. Use the npSecurityPublicKey to encrypt this value. Setting this object will cause the card to reconfig… |
| 1.3.6.1.4.1.11.2.4.3.20.7 | TablenpSecurityDot11EncryptedWEPKeyTable | not-accessible | current | Encrypted interface to the WEP Keys. |
| 1.3.6.1.4.1.11.2.4.3.20.7.1 | RownpSecurityDot11EncryptedWEPKeyEntry | not-accessible | current | Each row of the table gives a WEP Key |
| 1.3.6.1.4.1.11.2.4.3.20.7.1.2 | ColumnnpSecurityDot11EncryptedWEPKey | read-write | current | The encrypted WEP Key value. Use the npSecurityDot11PublicKey to encrypt this value. Setting this object will cause the card to reconfigure. |
| 1.3.6.1.4.1.11.2.4.3.20.8 | ScalarnpSecurityDot11SignalStrength | read-only | current | A weighted average over time of the signal strength between the access point and the print server in infrastructure mode. Not applicable when in ad hoc mode. |
| 1.3.6.1.4.1.11.2.4.3.20.9 | TablenpSecurityDot11SSIDTable | not-accessible | current | List of discovered SSIDs. |
| 1.3.6.1.4.1.11.2.4.3.20.9.1 | RownpSecurityDot11SSIDEntry | not-accessible | current | Each row of the table gives a discovered SSID value. |
| 1.3.6.1.4.1.11.2.4.3.20.9.1.2 | ColumnnpSecurityDot11SSID | read-only | current | A discovered SSID value. |
| 1.3.6.1.4.1.11.2.4.3.20.10 | ScalarnpSecurityDot11SSIDTableNumEntries | read-only | current | Displays the number of discovered SSIDs in the SSID Table. |
| 1.3.6.1.4.1.11.2.4.3.20.11 | ScalarnpSecurityDot11SSLCertLoaded | read-only | current | Indicates if SSL certificate has been loaded. |
| 1.3.6.1.4.1.11.2.4.3.20.12 | ScalarnpSecurityDot11TLSCertLoaded | read-only | current | Indicates if TLS Trusted CA certificate has been loaded. |
| 1.3.6.1.4.1.11.2.4.3.20.13 | ScalarnpSecuritySnmpV3EncryptedUserName | read-write | current | The encrypted SNMPv3 User Name. Use the npSecurityPublicKey to encrypt this value. The new SNMPv3 User Account will be installed after the npSecuritySnmpV3Encr… |
| 1.3.6.1.4.1.11.2.4.3.20.14 | ScalarnpSecuritySnmpV3AuthKeyPassPhrase | read-write | current | The encrypted SNMPv3 Authentication passphrase or key . Use the npSecurityPublicKey to encrypt this value. The new SNMPv3 User Account will be installed after … |
| 1.3.6.1.4.1.11.2.4.3.20.15 | ScalarnpSecuritySnmpV3PrivKeyPassPharse | read-write | current | The encrypted SNMPv3 Privacy passphrase or key. Use the npSecurityPublicKey to encrypt this value. The new SNMPv3 User Account will be installed after the npSe… |
| 1.3.6.1.4.1.11.2.4.3.20.16 | ScalarnpSecurityDot11BSSID | read-only | current | The BSSID value (hardware address of the access point). |
| 1.3.6.1.4.1.11.2.4.3.20.17 | ScalarnpSecurityDot1xTunnelAuthBits | read-write | current | The Dot1x Tunnel Authentication Bits. Bitwise field with the followings bits: Default All bits cleared EAP MD5 1 EAP MSCHAP 2 EAP MSCHAPv2 4 MSCHAP 8 MSCHAPv2 … |
| 1.3.6.1.4.1.11.2.4.3.20.18 | ScalarnpSecurityDot1xIdentityCleartext | read-write | current | The Dot1x Identity in cleartext. |
| 1.3.6.1.4.1.11.2.4.3.20.19 | ScalarnpSecurityDot11ExactMatchServerId | read-write | current | Indicates if an exact match is required on the EAP Server ID. |
| 1.3.6.1.4.1.11.2.4.3.20.20 | ScalarnpSecurityDot11EncryptionStrength | read-write | current | Indicates the EAP encrytpion strength. |
| 1.3.6.1.4.1.11.2.4.3.20.21 | ScalarnpSecurityCertBuff | read-only | current | A 512 byte buffer of the print server certificate as indexed by npSecurityCertBuffIndex. |
| 1.3.6.1.4.1.11.2.4.3.20.22 | ScalarnpSecurityCertBuffIndex | read-write | current | Indicates the index of the 512 byte block of the print server certificate to load into npSecurityCertBuff. |
| 1.3.6.1.4.1.11.2.4.3.20.23 | ScalarnpSecuritySslRedirection | read-write | current | Setting this object causes the SSL redirection connection to be enabled or disabled. |
| 1.3.6.1.4.1.11.2.4.3.20.24 | ScalarnpSecurityReset | read-write | current | Setting this object causes security object to reset bact to the defaults. |
| 1.3.6.1.4.1.11.2.4.3.20.25 | ScalarnpSecurityWebSpiEnable | read-write | current | This object enables/disables the Embedded Web Simple Printer Install feature. |
| 1.3.6.1.4.1.11.2.4.3.20.26 | ScalarnpSecurityDot11WEPStrength | read-only | current | Indicates the encryption strength of the WEP keys. |
| 1.3.6.1.4.1.11.2.4.3.20.27 | ScalarnpSecurityServicesSupported | read-only | current | BITWISE indication of the 802.11 security services this device supports. The following bits are defined: MD5 (0) TLS (1) TTLS (2) LEAP (3) PEAP (4) Reserved (5… |
| 1.3.6.1.4.1.11.2.4.3.20.28 | ScalarnpSecurityDot11Encryption | read-write | current | 802.11 encryption method currently enabled. The following values are defined: NONE (0x00) SSN/WEP (0x01) TKIP (0x02) AES (0x03) AUTO (0x04) Reserved (5 - 31) I… |
| 1.3.6.1.4.1.11.2.4.3.20.29 | ScalarnpSecurityDot11MulticastCipher | read-write | current | BITWISE indication of the multicast cipher method currently enabled. At minimum, one bit must be set. The following bits are defined: WEP (0) WPA (1) Reserved … |
| 1.3.6.1.4.1.11.2.4.3.20.34 | ScalarnpSecurityDot11BeaconTableNumEntries | read-only | current | Displays the number of discovered SSIDs in the DOT11 Beacon Table. |
| 1.3.6.1.4.1.11.2.4.3.20.35 | ScalarnpSecurityDot11OpenSSIDEnabled | read-only | current | Indicates if the Open SSID is enabled (Spirit-only). |
| 1.3.6.1.4.1.11.2.4.3.20.36 | ScalarnpSecurityDot11EncryptedWPAConfigPSKPassPhrase | read-write | current | The encrypted WPA Config PSK PassPhrase. Use the npSecurityPublicKey to encrypt this value |
| 1.3.6.1.4.1.11.2.4.3.20.37 | ScalarnpSecurityDot11DataRate | read-only | current | Current wireless network data rate |
| 1.3.6.1.4.1.11.2.4.3.20.38 | ScalarnpSecurityDot11ScanComplete | read-write | current | Used to control scan for SSIDs in the wireless network. Set to false to initiate a scan. A value of true indicates the completion of the scan |
| 1.3.6.1.4.1.11.2.4.3.20.39 | ScalarnpSecurityDot11RoamThreshold | read-write | current | Used to control roaming by the wireless radio. The radio on the print server will roam or try to find an access point with a stronger signal once the signal st… |
| 1.3.6.1.4.1.11.2.4.3.20.40 | ScalarnpSecuritySslEncryptionStrength | read-write | current | The SSL Encryption Strength. |
| 1.3.6.1.4.1.11.2.4.3.20.41 | ScalarnpSecurityDot11InstantVerification | read-write | current | Enable and disable wireless instant verification. (0) = Disable (1) = Enable |
| 1.3.6.1.4.1.11.2.4.3.20.42 | ScalarnpSecurityDot11DynamicEncryption | read-write | current | WPA mode. (0x00) = NONE (0x01) = BASIC (0x02) = WPA (0x03) = WPA2 (0x04) = AUTO |
| 1.3.6.1.4.1.11.2.4.3.20.43 | ScalarnpSecurityDot11LinkAuthentication | read-write | current | DOT11 Link Authentication modes. (1) = OPEN (2) = SHARED-KEY (128) = LEAP (143) = AUTO We can set the Link Authentication using the object dot11AuthenticationA… |
| 1.3.6.1.4.1.11.2.4.3.20.44 | ScalarnpSecuritySnmpV3AuthAlgorithm | read-write | current | Indicates the Authentication Algorithm used. It can have the value MD5 or SHA-1. This key will have a default value set to MD5. The following values are define… |
| 1.3.6.1.4.1.11.2.4.3.20.45 | ScalarnpSecuritySnmpV3PrivAlgorithm | read-write | current | Indicates the Privacy Algorithm used. It can have the value DES or AES-128. This key will have a default value set to DES. The following values are defined: DE… |
| 1.3.6.1.4.1.11.2.4.3.20.51 | ScalarnpSecurityWirelessDirectEncryptionMethod | read-write | current | This is used to select the encryption protocol in Wireless Direct Mode. The following values are defined: No Security ( 1 ) WPA ( 2 ) |
| 1.3.6.1.4.1.11.2.4.3.20.55 | ScalarnpSecurityWirelessDirectEncryptedPassPhrase | write-only | current | The WPA2 Passphrase or pre-shared key for secure Wireless Direct. The values allowed are 8 to 63 printable ASCII characters for passphrase or a 64 character he… |
| 1.3.6.1.4.1.11.2.4.3.20.57 | ScalarnpSecurityDot1xFailSafe | read-write | current | After configuring 802.1x on the printer and switching it over to a secured network, if authentication is successful printer retains connectivity and if it fail… |
| 1.3.6.1.4.1.11.2.4.3.20.61 | ScalarnpSecurityIppAuthentication | read-write | current | IPP Authentication is a feature which provides 'HTTP Basic Authentication' for IPP Print-Jobs. Use this OID to Enable/Disable IPP Authentication. 0 - Disable I… |
| 1.3.6.1.4.1.11.2.4.3.20.62 | ScalarnpSecurityIppAuthUsername | read-write | current | IPP Authentication is a feature which provides 'HTTP Basic Authentication' for IPP Print-Jobs. Use this OID to configure the IPP Authentication Username. Strin… |
| 1.3.6.1.4.1.11.2.4.3.20.63 | ScalarnpSecurityIppEncryptedAuthPassword | read-write | current | IPP Authentication is a feature which provides 'HTTP Basic Authentication' for IPP Print-Jobs. Use this OID to configure the IPP Authentication Password. Strin… |
| 1.3.6.1.4.1.11.2.4.3.22 | NodeinetTrap | |||
| 1.3.6.1.4.1.11.2.4.3.22.1 | NodeinetTrapDestination | |||
| 1.3.6.1.4.1.11.2.4.3.22.1.1 | ScalarinetTrapDestinationNum | read-only | current | Total number of ACTIVE rows in the inetTrapDestination table. |
| 1.3.6.1.4.1.11.2.4.3.22.1.2 | TableinetTrapDestinationTable | not-accessible | current | List of inetTrap destinations to which the agent sends traps. |
| 1.3.6.1.4.1.11.2.4.3.22.1.2.1 | RowinetTrapDestinationEntry | not-accessible | current | Entries are inetAddress Specific sequence of trap destination parameters. |
| 1.3.6.1.4.1.11.2.4.3.22.1.2.1.1 | ColumninetTrapRowIndex | read-only | current | Row Index of the inetTrapDestination table |
| 1.3.6.1.4.1.11.2.4.3.22.1.2.1.2 | ColumninetTrapRowStatus | read-write | current | Individual Row Status 1 - Row is Active - Row is activated and ready. 2 - Not-In-Service - Row is suspended. 3 - Not Ready - Row is not activated and still nee… |
| 1.3.6.1.4.1.11.2.4.3.22.1.2.1.3 | ColumninetTrapAddressType | read-write | current | Protocol family for trap. Possible values: ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) An IPv6 address as defined by … |
| 1.3.6.1.4.1.11.2.4.3.22.1.2.1.4 | ColumninetTrapAddress | read-write | current | IPv4/IPv6/FQDN address of trap destination node. |
| 1.3.6.1.4.1.11.2.4.3.22.1.2.1.5 | ColumninetTrapPort | read-write | current | Port number of the inetTrap Destination to which the trap is sent. |
| 1.3.6.1.4.1.11.2.4.3.22.1.2.1.6 | ColumninetTrapCommunityName | read-write | current | Trap community name specified in the trap packet. |
| 1.3.6.1.4.1.11.2.4.3.22.1.2.1.7 | ColumninetTrapVersion | read-write | current | Trap version, one of the following 0 = snmpV1 1 = snmpV2 3 = Inform Default is 1 = snmpV2. This value remains persistent through a powercycle. |
| 1.3.6.1.4.1.11.2.4.3.22.1.2.1.8 | ColumninetTrapStyle | read-write | current | This OID is read-write. If the user wants to receive only the PML traps, then trapStyle can be set to 1. If the user wants to receive only APS and General or N… |
| 1.3.6.1.4.1.11.2.4.3.22.1.2.1.9 | ColumninetTrapPMLOids | read-write | current | This OID is a read-write. This will have tokens of PML trappable OIDs. Each token (OID) will be separated by a semi-colon. If a trap destination entry is regis… |
| 1.3.6.1.4.1.11.2.4.3.22.1.2.1.10 | ColumninetTrapErrorValue | read-only | current | Gives the error value in case if the server is not able to send the traps to the configured trapDestination entry. It will be set to below defined error values… |
| 1.3.6.1.4.1.11.2.4.3.22.1.3 | ScalarinetTrapTest | read-write | current | Causes agent to send an snmp trap to hosts registered in the trap destination table. Value specified will be used as the specific trap id. |
| 1.3.6.1.4.1.11.2.4.3.22.1.4 | ScalarinetTrapFilterDelay | read-write | current | The purpose of the trap filter feature is to prevent multiple traps of the same specificTrapId to be sent within a short period of time. This object assigns th… |
| 1.3.6.1.4.1.11.2.4.3.22.1.5 | ScalarinetTrapBaseTimeout | read-write | current | Applicable only if trapVersion is set to Inform. Units are 1/10 second intervals. Default is 2 corresponding to 200 milliseconds. This value corresponds to the… |
| 1.3.6.1.4.1.11.2.4.3.22.1.6 | ScalarinetTrapRetryNum | read-write | current | Applicable only if trapVersion is set to Inform. This is the maximum number of inform retries that will be sent to this destination. Retries are sent if no inf… |
| 1.3.6.1.4.1.11.2.4.3.22.1.7 | ScalarinetTrapFQDNResolution | read-write | current | The purpose of this field is to configure various options for resolving FQDN. If configured as 1 - then FQDN names will be resolved for IPv4 addresses only If … |
| 1.3.6.1.4.1.11.2.4.3.22.1.8 | ScalarinetTrapFQDNMultipleAddressBehavior | read-write | current | 1 - Send traps to the first resolved address 2 - Send traps to all resolved address. |
| 1.3.6.1.4.1.11.2.4.3.22.1.9 | ScalarinetTrapUseDNSCache | read-write | current | Depending upon the value of this field resolution of FQDN will happen everytime when a trap is sent. |
| 1.3.6.1.4.1.11.2.13 | Nodetrap | |||
| 1.3.6.1.4.1.11.2.13.1 | NodetrapDest | |||
| 1.3.6.1.4.1.11.2.13.1.1 | ScalartrapDestinationNum | read-only | current | The number of trap destinations. |
| 1.3.6.1.4.1.11.2.13.1.2 | TabletrapDestinationTable | not-accessible | current | Protocol specific list of destinations to which the agent sends traps. |
| 1.3.6.1.4.1.11.2.13.1.2.1 | RowtrapDestinationEntry | not-accessible | current | Entries are a protocol specific sequence of trap destination parameters. |
| 1.3.6.1.4.1.11.2.13.1.2.1.1 | ColumntrapAddrFamily | read-write | current | Protocol family for trap. Possible values: 0 not_SET 1 af_UDP 2 af_IPX 3 af_LLC 4 af_DDP |
| 1.3.6.1.4.1.11.2.13.1.2.1.2 | ColumntrapAddrIp | read-write | current | Ip address of trap destination. |
| 1.3.6.1.4.1.11.2.13.1.2.1.3 | ColumntrapPort | read-write | current | Host port to which traps are sent. |
| 1.3.6.1.4.1.11.2.13.1.2.1.4 | ColumntrapCommunityName | read-write | current | Trap community name specified in the trap packet. |
| 1.3.6.1.4.1.11.2.13.1.2.1.5 | ColumntrapVersion | read-write | current | Trap version, one of the following 0 = snmpV1 1 = snmpV2 3 = Inform Default is 0 = snmpV1. This value remains persistent through a powercycle. |
| 1.3.6.1.4.1.11.2.13.1.2.1.6 | ColumntrapBaseTimeout | read-write | current | Applicable only if trapVersion is set to Inform. Units are 1/10 second intervals. Default is 2 corresponding to 200 milliseconds. This value corresponds to the… |
| 1.3.6.1.4.1.11.2.13.1.2.1.7 | ColumntrapRetryNum | read-write | current | This is the maximum number of inform retries that will be sent to this destination. Retries are sent if no inform reply is received within the timeout value. T… |
| 1.3.6.1.4.1.11.2.13.1.2.1.8 | ColumntrapDestOwner | read-only | current | This OID is read only. It is used to monitor the insertion and removal of a trap destination entry. It is controlled by the corresponding BRADY and old style P… |
| 1.3.6.1.4.1.11.2.13.1.2.1.9 | ColumnpmlTrapList | read-only | current | This OID is read only. It is used to monitor the insertion and removal of an old style PML trap entry. It is controlled by the corresponding old style PML regi… |
| 1.3.6.1.4.1.11.2.13.1.3 | ScalartrapTest | read-write | current | Causes agent to send an snmp trap to hosts registered in the trap destination table. Value specified will be used as the specific trap id. |
| 1.3.6.1.4.1.11.2.13.1.4 | ScalartrapSource | read-write | current | Sets the agent internal source for traps. Possibilities are as follows: 0 = ALL_TRAPS_ON 1 = ASYNC_PERIPHERAL_STATUS traps only 2 = proprietary pml traps only … |
| 1.3.6.1.4.1.11.2.13.1.5 | ScalartrapFilterDelay | read-write | current | The purpose of the trap filter feature is to prevent multiple traps of the same specificTrapId to be sent within a short period of time. This object assigns th… |
| 1.3.6.1.4.1.11.2.14 | Nodeicf | |||
| 1.3.6.1.4.1.11.2.14.11 | NodehpicfObjects | |||
| 1.3.6.1.4.1.11.2.14.11.1 | NodehpicfCommon | |||
| 1.3.6.1.4.1.11.2.14.11.1.3 | NodehpicfDownload | |||
| 1.3.6.1.4.1.11.2.14.11.1.3.1 | TablehpicfDownloadTable | not-accessible | current | A table of firmware downloads to this device. There will at any time be either 0 or 1 rows in this table, and the only valid index for this table is 1. It is o… |
| 1.3.6.1.4.1.11.2.14.11.1.3.1.1 | RowhpicfDownloadEntry | not-accessible | current | The row in the hpicfDownloadTable containing the download parameters. |
| 1.3.6.1.4.1.11.2.14.11.1.3.1.1.1 | ColumnhpicfDownloadIndex | not-accessible | current | The index which uniquely identifies this row. The only legal value for this object is 1. |
| 1.3.6.1.4.1.11.2.14.11.1.3.1.1.4 | ColumnhpicfDownloadTAddress | read-write | current | The transport address of the node to download firmware from, formatted according to the value of hpicfDownloadTDomain. An attempt to modify this value will fai… |
| 1.3.6.1.4.1.11.2.14.11.1.3.1.1.5 | ColumnhpicfDownloadTDomain | read-write | current | The kind of transport service to be used for the download. Currently supports snmpUDPDomain and snmpIPXDomain. An attempt to modify this value will fail if the… |
| 1.3.6.1.4.1.11.2.14.11.1.3.1.1.6 | ColumnhpicfDownloadFilename | read-write | current | Filename and path of file to download (maximum length of 63 characters + NULL). An attempt to modify this value will fail if the associated hpicfDownloadStatus… |
| 1.3.6.1.4.1.11.2.14.11.1.3.1.1.8 | ColumnhpicfDownloadErrorStatus | read-only | current | Status of download. The first seven codes are equal to the codes defined by the TFTP protocol. 'notDefined' is the same as TFTP protocol error 0. 'corruptFile'… |
| 1.3.6.1.4.1.11.2.14.11.1.3.1.1.9 | ColumnhpicfDownloadErrorText | read-only | current | A textual description of the current error status of the firmware download. |
| 1.3.6.1.4.1.11.2.14.11.1.3.1.1.10 | ColumnhpicfDownloadStatus | read-write | current | The status of this download entry. This object may not be set to 'active' unless the following columnar objects exist in this row: hpicfDownloadOwnerAddress, h… |
| 1.3.6.1.4.1.11.2.14.11.1.3.2 | ScalarhpicfDownloadLogMaxSize | read-only | obsolete | The maximum number of the download log entries supported by this agent. Note that 0 is a legal value for this variable. Starting with firmware release X.20.06 … |
| 1.3.6.1.4.1.11.2.15 | NodesnmpAccess | |||
| 1.3.6.1.4.1.11.2.15.1 | Nodecommunity | |||
| 1.3.6.1.4.1.11.2.15.1.1 | ScalarsetCommunityName | read-write | current | This object controls access of snmp read-write requests. Factory default configuration provides authentication of incoming packets with community names: intern… |
| 1.3.6.1.4.1.11.2.15.1.2 | ScalargetCommunityName | read-write | current | This object controls access of snmp read requests. Factory default configuration provides authentication of incoming packets with community names: internal and… |
| 1.3.6.1.4.1.11.2.36 | NodehpWebMgmt | |||
| 1.3.6.1.4.1.11.2.36.1 | NodehpHttpMgMod | |||
| 1.3.6.1.4.1.11.2.36.1.1 | NodehpHttpMgObjects | |||
| 1.3.6.1.4.1.11.2.36.1.1.1 | NodehpHttpMgDefaults | |||
| 1.3.6.1.4.1.11.2.36.1.1.1.1 | ScalarhpHttpMgDefaultURL | read-only | current | A Uniform Resource Locator (URL), as defined in RFC1738, for the default management information for this device. This URL is typically used by a HTTP browser t… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString128 | DisplayString (SIZE (0..128)) | current | A display string from 0 to 128 in length |