JNX-OPT-IF-MIB
486 objects
The MIB module to describe pre-OTN and OTN interfaces. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3591; see the RFC itself for full legal notices.
Imported Objects
| IF-MIB | ifIndex |
| JUNIPER-SMI | jnxoptIfMibRoot |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE transmission Unsigned32 |
| SNMPv2-TC | RowPointer RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.73.1 | IdentityjnxoptIfMibModule | The MIB module to describe pre-OTN and OTN interfaces. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3591; see the … | ||
| 1.3.6.1.4.1.2636.3.73.1.1 | NodejnxoptIfObjects | |||
| 1.3.6.1.4.1.2636.3.73.1.1.1 | NodejnxoptIfOTMn | |||
| 1.3.6.1.4.1.2636.3.73.1.1.1.1 | TablejnxoptIfOTMnTable | not-accessible | current | A table of OTMn structure information. |
| 1.3.6.1.4.1.2636.3.73.1.1.1.1.1 | RowjnxoptIfOTMnEntry | not-accessible | current | A conceptual row that contains the OTMn structure information of an optical interface. |
| 1.3.6.1.4.1.2636.3.73.1.1.1.1.1.1 | ColumnjnxoptIfOTMnOrder | read-only | current | This object indicates the order of the OTM, which represents the maximum number of wavelengths that can be supported at the bit rate(s) supported on the interf… |
| 1.3.6.1.4.1.2636.3.73.1.1.1.1.1.2 | ColumnjnxoptIfOTMnReduced | read-only | current | This object indicates whether a reduced or full functionality is supported at the interface. A value of true means reduced. A value of false means full. |
| 1.3.6.1.4.1.2636.3.73.1.1.1.1.1.3 | ColumnjnxoptIfOTMnBitRates | read-only | current | This attribute is a bit map representing the bit rate or set of bit rates supported on the interface. The meaning of each bit position is as follows: bitRateK1… |
| 1.3.6.1.4.1.2636.3.73.1.1.1.1.1.4 | ColumnjnxoptIfOTMnInterfaceType | read-only | current | This object identifies the type of interface. The value of this attribute will affect the behavior of the OTM with respect to presence/absence of OTM Overhead … |
| 1.3.6.1.4.1.2636.3.73.1.1.1.1.1.5 | ColumnjnxoptIfOTMnTcmMax | read-write | current | This object identifies the maximum number of TCM levels allowed for any Optical Channel contained in this OTM. A new TCM activation will be rejected if the req… |
| 1.3.6.1.4.1.2636.3.73.1.1.1.1.1.6 | ColumnjnxoptIfOTMnOpticalReach | read-only | current | This object indicates the length the optical signal may travel before requiring termination or regeneration. The meaning of the enumeration are: intraOffice(1)… |
| 1.3.6.1.4.1.2636.3.73.1.1.2 | NodejnxoptIfPerfMon | |||
| 1.3.6.1.4.1.2636.3.73.1.1.2.1 | TablejnxoptIfPerfMonIntervalTable | not-accessible | current | A table of 15-minute performance monitoring interval information. |
| 1.3.6.1.4.1.2636.3.73.1.1.2.1.1 | RowjnxoptIfPerfMonIntervalEntry | not-accessible | current | A conceptual row that contains 15-minute performance monitoring interval information of an interface. |
| 1.3.6.1.4.1.2636.3.73.1.1.2.1.1.1 | ColumnjnxoptIfPerfMonCurrentTimeElapsed | read-only | current | Number of seconds elapsed in the current 15-minute performance monitoring interval. If, for some reason, such as an adjustment in the NE's time-of-day clock, t… |
| 1.3.6.1.4.1.2636.3.73.1.1.2.1.1.2 | ColumnjnxoptIfPerfMonCurDayTimeElapsed | read-only | current | Number of seconds elapsed in the current 24-hour interval performance monitoring period. If, for some reason, such as an adjustment in the NE time-of-day clock… |
| 1.3.6.1.4.1.2636.3.73.1.1.2.1.1.3 | ColumnjnxoptIfPerfMonIntervalNumIntervals | read-only | current | The number of 15-minute intervals for which performance monitoring data is available. The number is the same for all the associated sub layers of the interface… |
| 1.3.6.1.4.1.2636.3.73.1.1.2.1.1.4 | ColumnjnxoptIfPerfMonIntervalNumInvalidIntervals | read-only | current | The number of intervals in the range from 0 to jnxoptIfPerfMonIntervalNumIntervals for which no performance monitoring data is available and/or the data is inv… |
| 1.3.6.1.4.1.2636.3.73.1.1.3 | NodejnxoptIfOTSn | |||
| 1.3.6.1.4.1.2636.3.73.1.1.3.1 | TablejnxoptIfOTSnConfigTable | not-accessible | current | A table of OTSn configuration information. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.1.1 | RowjnxoptIfOTSnConfigEntry | not-accessible | current | A conceptual row that contains OTSn configuration information of an interface. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.1.1.1 | ColumnjnxoptIfOTSnDirectionality | read-only | current | Indicates the directionality of the entity. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.1.1.2 | ColumnjnxoptIfOTSnAprStatus | read-only | current | This attribute indicates the status of the Automatic Power Reduction (APR) function of the entity. Valid values are 'on' and 'off'. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.1.1.3 | ColumnjnxoptIfOTSnAprControl | read-write | current | This object is a UTF-8 encoded string that specifies Automatic Power Reduction (APR) control actions requested of this entity (when written) and that returns t… |
| 1.3.6.1.4.1.2636.3.73.1.1.3.1.1.4 | ColumnjnxoptIfOTSnTraceIdentifierTransmitted | read-write | current | The trace identifier transmitted. This object is applicable when jnxoptIfOTSnDirectionality has the value source(2) or bidirectional(3). This object does not a… |
| 1.3.6.1.4.1.2636.3.73.1.1.3.1.1.5 | ColumnjnxoptIfOTSnDAPIExpected | read-write | current | The DAPI expected by the receiver. This object is applicable when jnxoptIfOTSnDirectionality has the value sink(1) or bidirectional(3). It has no effect if jnx… |
| 1.3.6.1.4.1.2636.3.73.1.1.3.1.1.6 | ColumnjnxoptIfOTSnSAPIExpected | read-write | current | The SAPI expected by the receiver. This object is applicable when jnxoptIfOTSnDirectionality has the value sink(1) or bidirectional(3). It has no effect if jnx… |
| 1.3.6.1.4.1.2636.3.73.1.1.3.1.1.7 | ColumnjnxoptIfOTSnTraceIdentifierAccepted | read-only | current | The actual trace identifier received. This object is applicable when jnxoptIfOTSnDirectionality has the value sink(1) or bidirectional(3). Its value is unspeci… |
| 1.3.6.1.4.1.2636.3.73.1.1.3.1.1.8 | ColumnjnxoptIfOTSnTIMDetMode | read-write | current | Indicates the mode of the Trace Identifier Mismatch (TIM) Detection function. This object is applicable when jnxoptIfOTSnDirectionality has the value sink(1) o… |
| 1.3.6.1.4.1.2636.3.73.1.1.3.1.1.9 | ColumnjnxoptIfOTSnTIMActEnabled | read-write | current | Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. This object is applicable when jnxoptIfOTSnDirectionality has the … |
| 1.3.6.1.4.1.2636.3.73.1.1.3.1.1.10 | ColumnjnxoptIfOTSnCurrentStatus | read-only | current | Indicates the defect condition of the entity, if any. This object is applicable when jnxoptIfOTSnDirectionality has the value sink(1) or bidirectional(3). In r… |
| 1.3.6.1.4.1.2636.3.73.1.1.3.2 | TablejnxoptIfOTSnSinkCurrentTable | not-accessible | current | A table of OTSn sink performance monitoring information for the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.2.1 | RowjnxoptIfOTSnSinkCurrentEntry | not-accessible | current | A conceptual row that contains OTSn sink performance monitoring information of an interface for the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.2.1.1 | ColumnjnxoptIfOTSnSinkCurrentSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.2.1.2 | ColumnjnxoptIfOTSnSinkCurrentInputPower | read-only | current | The optical power monitored at the input. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.2.1.3 | ColumnjnxoptIfOTSnSinkCurrentLowInputPower | read-only | current | The lowest optical power monitored at the input during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.2.1.4 | ColumnjnxoptIfOTSnSinkCurrentHighInputPower | read-only | current | The highest optical power monitored at the input during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.2.1.5 | ColumnjnxoptIfOTSnSinkCurrentLowerInputPowerThreshold | read-write | current | The lower limit threshold on input power. If jnxoptIfOTSnSinkCurrentInputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.2.1.6 | ColumnjnxoptIfOTSnSinkCurrentUpperInputPowerThreshold | read-write | current | The upper limit threshold on input power. If jnxoptIfOTSnSinkCurrentInputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.2.1.7 | ColumnjnxoptIfOTSnSinkCurrentOutputPower | read-only | current | The optical power monitored at the output. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.2.1.8 | ColumnjnxoptIfOTSnSinkCurrentLowOutputPower | read-only | current | The lowest optical power monitored at the output during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.2.1.9 | ColumnjnxoptIfOTSnSinkCurrentHighOutputPower | read-only | current | The highest optical power monitored at the output during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.2.1.10 | ColumnjnxoptIfOTSnSinkCurrentLowerOutputPowerThreshold | read-write | current | The lower limit threshold on output power. If jnxoptIfOTSnSinkCurrentOutputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.2.1.11 | ColumnjnxoptIfOTSnSinkCurrentUpperOutputPowerThreshold | read-write | current | The upper limit threshold on output power. If jnxoptIfOTSnSinkCurrentOutputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.3 | TablejnxoptIfOTSnSinkIntervalTable | not-accessible | current | A table of historical OTSn sink performance monitoring information. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.3.1 | RowjnxoptIfOTSnSinkIntervalEntry | not-accessible | current | A conceptual row that contains OTSn sink performance monitoring information of an interface during a particular historical interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.3.1.1 | ColumnjnxoptIfOTSnSinkIntervalNumber | not-accessible | current | Uniquely identifies the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.3.1.2 | ColumnjnxoptIfOTSnSinkIntervalSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.3.1.3 | ColumnjnxoptIfOTSnSinkIntervalLastInputPower | read-only | current | The last optical power monitored at the input during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.3.1.4 | ColumnjnxoptIfOTSnSinkIntervalLowInputPower | read-only | current | The lowest optical power monitored at the input during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.3.1.5 | ColumnjnxoptIfOTSnSinkIntervalHighInputPower | read-only | current | The highest optical power monitored at the input during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.3.1.6 | ColumnjnxoptIfOTSnSinkIntervalLastOutputPower | read-only | current | The last optical power monitored at the output during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.3.1.7 | ColumnjnxoptIfOTSnSinkIntervalLowOutputPower | read-only | current | The lowest optical power monitored at the output during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.3.1.8 | ColumnjnxoptIfOTSnSinkIntervalHighOutputPower | read-only | current | The highest optical power monitored at the output during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.4 | TablejnxoptIfOTSnSinkCurDayTable | not-accessible | current | A table of OTSn sink performance monitoring information for the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.4.1 | RowjnxoptIfOTSnSinkCurDayEntry | not-accessible | current | A conceptual row that contains OTSn sink performance monitoring information of an interface for the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.4.1.1 | ColumnjnxoptIfOTSnSinkCurDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.4.1.2 | ColumnjnxoptIfOTSnSinkCurDayLowInputPower | read-only | current | The lowest optical power monitored at the input during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.4.1.3 | ColumnjnxoptIfOTSnSinkCurDayHighInputPower | read-only | current | The highest optical power monitored at the input during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.4.1.4 | ColumnjnxoptIfOTSnSinkCurDayLowOutputPower | read-only | current | The lowest optical power monitored at the output during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.4.1.5 | ColumnjnxoptIfOTSnSinkCurDayHighOutputPower | read-only | current | The highest optical power monitored at the output during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.5 | TablejnxoptIfOTSnSinkPrevDayTable | not-accessible | current | A table of OTSn sink performance monitoring information for the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.5.1 | RowjnxoptIfOTSnSinkPrevDayEntry | not-accessible | current | A conceptual row that contains OTSn sink performance monitoring information of an interface for the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.5.1.1 | ColumnjnxoptIfOTSnSinkPrevDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.5.1.2 | ColumnjnxoptIfOTSnSinkPrevDayLastInputPower | read-only | current | The last optical power monitored at the input during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.5.1.3 | ColumnjnxoptIfOTSnSinkPrevDayLowInputPower | read-only | current | The lowest optical power monitored at the input during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.5.1.4 | ColumnjnxoptIfOTSnSinkPrevDayHighInputPower | read-only | current | The highest optical power monitored at the input during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.5.1.5 | ColumnjnxoptIfOTSnSinkPrevDayLastOutputPower | read-only | current | The last optical power monitored at the output during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.5.1.6 | ColumnjnxoptIfOTSnSinkPrevDayLowOutputPower | read-only | current | The lowest optical power monitored at the output during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.5.1.7 | ColumnjnxoptIfOTSnSinkPrevDayHighOutputPower | read-only | current | The highest optical power monitored at the output during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.6 | TablejnxoptIfOTSnSrcCurrentTable | not-accessible | current | A table of OTSn source performance monitoring information for the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.6.1 | RowjnxoptIfOTSnSrcCurrentEntry | not-accessible | current | A conceptual row that contains OTSn source performance monitoring information of an interface for the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.6.1.1 | ColumnjnxoptIfOTSnSrcCurrentSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.6.1.2 | ColumnjnxoptIfOTSnSrcCurrentOutputPower | read-only | current | The optical power monitored at the output. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.6.1.3 | ColumnjnxoptIfOTSnSrcCurrentLowOutputPower | read-only | current | The lowest optical power monitored at the output during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.6.1.4 | ColumnjnxoptIfOTSnSrcCurrentHighOutputPower | read-only | current | The highest optical power monitored at the output during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.6.1.5 | ColumnjnxoptIfOTSnSrcCurrentLowerOutputPowerThreshold | read-write | current | The lower limit threshold on output power. If jnxoptIfOTSnSrcCurrentOutputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.6.1.6 | ColumnjnxoptIfOTSnSrcCurrentUpperOutputPowerThreshold | read-write | current | The upper limit threshold on output power. If jnxoptIfOTSnSrcCurrentOutputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.6.1.7 | ColumnjnxoptIfOTSnSrcCurrentInputPower | read-only | current | The optical power monitored at the input. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.6.1.8 | ColumnjnxoptIfOTSnSrcCurrentLowInputPower | read-only | current | The lowest optical power monitored at the input during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.6.1.9 | ColumnjnxoptIfOTSnSrcCurrentHighInputPower | read-only | current | The highest optical power monitored at the input during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.6.1.10 | ColumnjnxoptIfOTSnSrcCurrentLowerInputPowerThreshold | read-write | current | The lower limit threshold on input power. If jnxoptIfOTSnSrcCurrentInputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.6.1.11 | ColumnjnxoptIfOTSnSrcCurrentUpperInputPowerThreshold | read-write | current | The upper limit threshold on input power. If jnxoptIfOTSnSrcCurrentInputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.7 | TablejnxoptIfOTSnSrcIntervalTable | not-accessible | current | A table of historical OTSn source performance monitoring information. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.7.1 | RowjnxoptIfOTSnSrcIntervalEntry | not-accessible | current | A conceptual row that contains OTSn source performance monitoring information of an interface during a particular historical interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.7.1.1 | ColumnjnxoptIfOTSnSrcIntervalNumber | not-accessible | current | Uniquely identifies the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.7.1.2 | ColumnjnxoptIfOTSnSrcIntervalSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.7.1.3 | ColumnjnxoptIfOTSnSrcIntervalLastOutputPower | read-only | current | The last optical power monitored at the output during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.7.1.4 | ColumnjnxoptIfOTSnSrcIntervalLowOutputPower | read-only | current | The lowest optical power monitored at the output during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.7.1.5 | ColumnjnxoptIfOTSnSrcIntervalHighOutputPower | read-only | current | The highest optical power monitored at the output during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.7.1.6 | ColumnjnxoptIfOTSnSrcIntervalLastInputPower | read-only | current | The last optical power monitored at the input during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.7.1.7 | ColumnjnxoptIfOTSnSrcIntervalLowInputPower | read-only | current | The lowest optical power monitored at the input during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.7.1.8 | ColumnjnxoptIfOTSnSrcIntervalHighInputPower | read-only | current | The highest optical power monitored at the input during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.8 | TablejnxoptIfOTSnSrcCurDayTable | not-accessible | current | A table of OTSn source performance monitoring information for the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.8.1 | RowjnxoptIfOTSnSrcCurDayEntry | not-accessible | current | A conceptual row that contains OTSn source performance monitoring information of an interface for the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.8.1.1 | ColumnjnxoptIfOTSnSrcCurDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.8.1.2 | ColumnjnxoptIfOTSnSrcCurDayLowOutputPower | read-only | current | The lowest optical power monitored at the output during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.8.1.3 | ColumnjnxoptIfOTSnSrcCurDayHighOutputPower | read-only | current | The highest optical power monitored at the output during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.8.1.4 | ColumnjnxoptIfOTSnSrcCurDayLowInputPower | read-only | current | The lowest optical power monitored at the input during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.8.1.5 | ColumnjnxoptIfOTSnSrcCurDayHighInputPower | read-only | current | The highest optical power monitored at the input during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.9 | TablejnxoptIfOTSnSrcPrevDayTable | not-accessible | current | A table of OTSn source performance monitoring information for the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.9.1 | RowjnxoptIfOTSnSrcPrevDayEntry | not-accessible | current | A conceptual row that contains OTSn source performance monitoring information of an interface for the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.9.1.1 | ColumnjnxoptIfOTSnSrcPrevDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.9.1.2 | ColumnjnxoptIfOTSnSrcPrevDayLastOutputPower | read-only | current | The last optical power monitored at the output during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.9.1.3 | ColumnjnxoptIfOTSnSrcPrevDayLowOutputPower | read-only | current | The lowest optical power monitored at the output during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.9.1.4 | ColumnjnxoptIfOTSnSrcPrevDayHighOutputPower | read-only | current | The highest optical power monitored at the output during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.9.1.5 | ColumnjnxoptIfOTSnSrcPrevDayLastInputPower | read-only | current | The last optical power monitored at the input during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.9.1.6 | ColumnjnxoptIfOTSnSrcPrevDayLowInputPower | read-only | current | The lowest optical power monitored at the input during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.3.9.1.7 | ColumnjnxoptIfOTSnSrcPrevDayHighInputPower | read-only | current | The highest optical power monitored at the input during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4 | NodejnxoptIfOMSn | |||
| 1.3.6.1.4.1.2636.3.73.1.1.4.1 | TablejnxoptIfOMSnConfigTable | not-accessible | current | A table of OMSn configuration information. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.1.1 | RowjnxoptIfOMSnConfigEntry | not-accessible | current | A conceptual row that contains OMSn configuration information of an interface. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.1.1.1 | ColumnjnxoptIfOMSnDirectionality | read-only | current | Indicates the directionality of the entity. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.1.1.2 | ColumnjnxoptIfOMSnCurrentStatus | read-only | current | Indicates the defect condition of the entity, if any. This object is applicable only to full capability systems whose interface type is IaDI and for which jnxo… |
| 1.3.6.1.4.1.2636.3.73.1.1.4.2 | TablejnxoptIfOMSnSinkCurrentTable | not-accessible | current | A table of OMSn sink performance monitoring information for the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.2.1 | RowjnxoptIfOMSnSinkCurrentEntry | not-accessible | current | A conceptual row that contains OMSn sink performance monitoring information of an interface for the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.2.1.1 | ColumnjnxoptIfOMSnSinkCurrentSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.2.1.2 | ColumnjnxoptIfOMSnSinkCurrentAggregatedInputPower | read-only | current | The aggregated optical power of all the DWDM input channels. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.2.1.3 | ColumnjnxoptIfOMSnSinkCurrentLowAggregatedInputPower | read-only | current | The lowest aggregated optical power of all the DWDM input channels during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.2.1.4 | ColumnjnxoptIfOMSnSinkCurrentHighAggregatedInputPower | read-only | current | The highest aggregated optical power of all the DWDM input channels during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.2.1.5 | ColumnjnxoptIfOMSnSinkCurrentLowerInputPowerThreshold | read-write | current | The lower limit threshold on aggregated input power. If jnxoptIfOMSnSinkCurrentAggregatedInputPower drops to this value or below, a Threshold Crossing Alert (T… |
| 1.3.6.1.4.1.2636.3.73.1.1.4.2.1.6 | ColumnjnxoptIfOMSnSinkCurrentUpperInputPowerThreshold | read-write | current | The upper limit threshold on aggregated input power. If jnxoptIfOMSnSinkCurrentAggregatedInputPower reaches or exceeds this value, a Threshold Crossing Alert (… |
| 1.3.6.1.4.1.2636.3.73.1.1.4.2.1.7 | ColumnjnxoptIfOMSnSinkCurrentOutputPower | read-only | current | The optical power monitored at the output. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.2.1.8 | ColumnjnxoptIfOMSnSinkCurrentLowOutputPower | read-only | current | The lowest optical power monitored at the output during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.2.1.9 | ColumnjnxoptIfOMSnSinkCurrentHighOutputPower | read-only | current | The highest optical power monitored at the output during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.2.1.10 | ColumnjnxoptIfOMSnSinkCurrentLowerOutputPowerThreshold | read-write | current | The lower limit threshold on output power. If jnxoptIfOMSnSinkCurrentOutputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.2.1.11 | ColumnjnxoptIfOMSnSinkCurrentUpperOutputPowerThreshold | read-write | current | The upper limit threshold on output power. If jnxoptIfOMSnSinkCurrentOutputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.3 | TablejnxoptIfOMSnSinkIntervalTable | not-accessible | current | A table of historical OMSn sink performance monitoring information. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.3.1 | RowjnxoptIfOMSnSinkIntervalEntry | not-accessible | current | A conceptual row that contains OMSn sink performance monitoring information of an interface during a particular historical interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.3.1.1 | ColumnjnxoptIfOMSnSinkIntervalNumber | not-accessible | current | Uniquely identifies the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.3.1.2 | ColumnjnxoptIfOMSnSinkIntervalSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.3.1.3 | ColumnjnxoptIfOMSnSinkIntervalLastAggregatedInputPower | read-only | current | The last aggregated optical power of all the DWDM input channels during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.3.1.4 | ColumnjnxoptIfOMSnSinkIntervalLowAggregatedInputPower | read-only | current | The lowest aggregated optical power of all the DWDM input channels during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.3.1.5 | ColumnjnxoptIfOMSnSinkIntervalHighAggregatedInputPower | read-only | current | The highest aggregated optical power of all the DWDM input channels during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.3.1.6 | ColumnjnxoptIfOMSnSinkIntervalLastOutputPower | read-only | current | The last optical power at the output during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.3.1.7 | ColumnjnxoptIfOMSnSinkIntervalLowOutputPower | read-only | current | The lowest optical power at the output during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.3.1.8 | ColumnjnxoptIfOMSnSinkIntervalHighOutputPower | read-only | current | The highest optical power at the output during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.4 | TablejnxoptIfOMSnSinkCurDayTable | not-accessible | current | A table of OMSn sink performance monitoring information for the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.4.1 | RowjnxoptIfOMSnSinkCurDayEntry | not-accessible | current | A conceptual row that contains OMSn sink performance monitoring information of an interface for the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.4.1.1 | ColumnjnxoptIfOMSnSinkCurDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.4.1.2 | ColumnjnxoptIfOMSnSinkCurDayLowAggregatedInputPower | read-only | current | The lowest aggregated optical power of all the DWDM input channels during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.4.1.3 | ColumnjnxoptIfOMSnSinkCurDayHighAggregatedInputPower | read-only | current | The highest aggregated optical power of all the DWDM input channels during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.4.1.4 | ColumnjnxoptIfOMSnSinkCurDayLowOutputPower | read-only | current | The lowest optical power at the output during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.4.1.5 | ColumnjnxoptIfOMSnSinkCurDayHighOutputPower | read-only | current | The highest optical power at the output during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.5 | TablejnxoptIfOMSnSinkPrevDayTable | not-accessible | current | A table of OMSn sink performance monitoring information for the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.5.1 | RowjnxoptIfOMSnSinkPrevDayEntry | not-accessible | current | A conceptual row that contains OMSn sink performance monitoring information of an interface for the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.5.1.1 | ColumnjnxoptIfOMSnSinkPrevDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.5.1.2 | ColumnjnxoptIfOMSnSinkPrevDayLastAggregatedInputPower | read-only | current | The last aggregated optical power of all the DWDM input channels during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.5.1.3 | ColumnjnxoptIfOMSnSinkPrevDayLowAggregatedInputPower | read-only | current | The lowest aggregated optical power of all the DWDM input channels during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.5.1.4 | ColumnjnxoptIfOMSnSinkPrevDayHighAggregatedInputPower | read-only | current | The highest aggregated optical power of all the DWDM input channels during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.5.1.5 | ColumnjnxoptIfOMSnSinkPrevDayLastOutputPower | read-only | current | The last optical power at the output during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.5.1.6 | ColumnjnxoptIfOMSnSinkPrevDayLowOutputPower | read-only | current | The lowest optical power at the output during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.5.1.7 | ColumnjnxoptIfOMSnSinkPrevDayHighOutputPower | read-only | current | The highest optical power at the output during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.6 | TablejnxoptIfOMSnSrcCurrentTable | not-accessible | current | A table of OMSn source performance monitoring information for the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.6.1 | RowjnxoptIfOMSnSrcCurrentEntry | not-accessible | current | A conceptual row that contains OMSn source performance monitoring information of an interface for the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.6.1.1 | ColumnjnxoptIfOMSnSrcCurrentSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.6.1.2 | ColumnjnxoptIfOMSnSrcCurrentOutputPower | read-only | current | The optical power monitored at the output. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.6.1.3 | ColumnjnxoptIfOMSnSrcCurrentLowOutputPower | read-only | current | The lowest optical power monitored at the output during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.6.1.4 | ColumnjnxoptIfOMSnSrcCurrentHighOutputPower | read-only | current | The highest optical power monitored at the output during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.6.1.5 | ColumnjnxoptIfOMSnSrcCurrentLowerOutputPowerThreshold | read-write | current | The lower limit threshold on output power. If jnxoptIfOMSnSrcCurrentOutputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.6.1.6 | ColumnjnxoptIfOMSnSrcCurrentUpperOutputPowerThreshold | read-write | current | The upper limit threshold on output power. If jnxoptIfOMSnSrcCurrentOutputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.6.1.7 | ColumnjnxoptIfOMSnSrcCurrentAggregatedInputPower | read-only | current | The aggregated optical power at the input. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.6.1.8 | ColumnjnxoptIfOMSnSrcCurrentLowAggregatedInputPower | read-only | current | The lowest aggregated optical power at the input during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.6.1.9 | ColumnjnxoptIfOMSnSrcCurrentHighAggregatedInputPower | read-only | current | The highest aggregated optical power at the input during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.6.1.10 | ColumnjnxoptIfOMSnSrcCurrentLowerInputPowerThreshold | read-write | current | The lower limit threshold on aggregated input power. If jnxoptIfOMSnSrcCurrentAggregatedInputPower drops to this value or below, a Threshold Crossing Alert (TC… |
| 1.3.6.1.4.1.2636.3.73.1.1.4.6.1.11 | ColumnjnxoptIfOMSnSrcCurrentUpperInputPowerThreshold | read-write | current | The upper limit threshold on aggregated input power. If jnxoptIfOMSnSrcCurrentAggregatedInputPower reaches or exceeds this value, a Threshold Crossing Alert (T… |
| 1.3.6.1.4.1.2636.3.73.1.1.4.7 | TablejnxoptIfOMSnSrcIntervalTable | not-accessible | current | A table of historical OMSn source performance monitoring information. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.7.1 | RowjnxoptIfOMSnSrcIntervalEntry | not-accessible | current | A conceptual row that contains OMSn source performance monitoring information of an interface during a particular historical interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.7.1.1 | ColumnjnxoptIfOMSnSrcIntervalNumber | not-accessible | current | Uniquely identifies the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.7.1.2 | ColumnjnxoptIfOMSnSrcIntervalSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.7.1.3 | ColumnjnxoptIfOMSnSrcIntervalLastOutputPower | read-only | current | The last optical power monitored at the output during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.7.1.4 | ColumnjnxoptIfOMSnSrcIntervalLowOutputPower | read-only | current | The lowest optical power monitored at the output during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.7.1.5 | ColumnjnxoptIfOMSnSrcIntervalHighOutputPower | read-only | current | The highest optical power monitored at the output during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.7.1.6 | ColumnjnxoptIfOMSnSrcIntervalLastAggregatedInputPower | read-only | current | The last aggregated optical power at the input during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.7.1.7 | ColumnjnxoptIfOMSnSrcIntervalLowAggregatedInputPower | read-only | current | The lowest aggregated optical power at the input during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.7.1.8 | ColumnjnxoptIfOMSnSrcIntervalHighAggregatedInputPower | read-only | current | The highest aggregated optical power at the input during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.8 | TablejnxoptIfOMSnSrcCurDayTable | not-accessible | current | A table of OMSn source performance monitoring information for the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.8.1 | RowjnxoptIfOMSnSrcCurDayEntry | not-accessible | current | A conceptual row that contains OMSn source performance monitoring information of an interface for the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.8.1.1 | ColumnjnxoptIfOMSnSrcCurDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.8.1.2 | ColumnjnxoptIfOMSnSrcCurDayLowOutputPower | read-only | current | The lowest optical power monitored at the output during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.8.1.3 | ColumnjnxoptIfOMSnSrcCurDayHighOutputPower | read-only | current | The highest optical power monitored at the output during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.8.1.4 | ColumnjnxoptIfOMSnSrcCurDayLowAggregatedInputPower | read-only | current | The lowest aggregated optical power at the input during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.8.1.5 | ColumnjnxoptIfOMSnSrcCurDayHighAggregatedInputPower | read-only | current | The highest aggregated optical power at the input during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.9 | TablejnxoptIfOMSnSrcPrevDayTable | not-accessible | current | A table of OMSn source performance monitoring information for the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.9.1 | RowjnxoptIfOMSnSrcPrevDayEntry | not-accessible | current | A conceptual row that contains OMSn source performance monitoring information of an interface for the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.9.1.1 | ColumnjnxoptIfOMSnSrcPrevDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.9.1.2 | ColumnjnxoptIfOMSnSrcPrevDayLastOutputPower | read-only | current | The last optical power monitored at the output during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.9.1.3 | ColumnjnxoptIfOMSnSrcPrevDayLowOutputPower | read-only | current | The lowest optical power monitored at the output during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.9.1.4 | ColumnjnxoptIfOMSnSrcPrevDayHighOutputPower | read-only | current | The highest optical power monitored at the output during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.9.1.5 | ColumnjnxoptIfOMSnSrcPrevDayLastAggregatedInputPower | read-only | current | The last aggregated optical power at the input during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.9.1.6 | ColumnjnxoptIfOMSnSrcPrevDayLowAggregatedInputPower | read-only | current | The lowest aggregated optical power at the input during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.4.9.1.7 | ColumnjnxoptIfOMSnSrcPrevDayHighAggregatedInputPower | read-only | current | The highest aggregated optical power at the input during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5 | NodejnxoptIfOChGroup | |||
| 1.3.6.1.4.1.2636.3.73.1.1.5.1 | TablejnxoptIfOChGroupConfigTable | not-accessible | current | A table of OChGroup configuration information. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.1.1 | RowjnxoptIfOChGroupConfigEntry | not-accessible | current | A conceptual row that contains OChGroup configuration information of an interface. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.1.1.1 | ColumnjnxoptIfOChGroupDirectionality | read-only | current | Indicates the directionality of the entity. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.2 | TablejnxoptIfOChGroupSinkCurrentTable | not-accessible | current | A table of OChGroup sink performance monitoring information for the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.2.1 | RowjnxoptIfOChGroupSinkCurrentEntry | not-accessible | current | A conceptual row that contains OChGroup sink performance monitoring information of an interface for the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.2.1.1 | ColumnjnxoptIfOChGroupSinkCurrentSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.2.1.2 | ColumnjnxoptIfOChGroupSinkCurrentAggregatedInputPower | read-only | current | The aggregated optical power of all the DWDM input channels in the OChGroup. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.2.1.3 | ColumnjnxoptIfOChGroupSinkCurrentLowAggregatedInputPower | read-only | current | The lowest aggregated optical power of all the DWDM input channels in the OChGroup during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.2.1.4 | ColumnjnxoptIfOChGroupSinkCurrentHighAggregatedInputPower | read-only | current | The highest aggregated optical power of all the DWDM input channels in the OChGroup during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.2.1.5 | ColumnjnxoptIfOChGroupSinkCurrentLowerInputPowerThreshold | read-write | current | The lower limit threshold on aggregated input power. If jnxoptIfOChGroupSinkCurrentAggregatedInputPower drops to this value or below, a Threshold Crossing Aler… |
| 1.3.6.1.4.1.2636.3.73.1.1.5.2.1.6 | ColumnjnxoptIfOChGroupSinkCurrentUpperInputPowerThreshold | read-write | current | The upper limit threshold on aggregated input power. If jnxoptIfOChGroupSinkCurrentAggregatedInputPower reaches or exceeds this value, a Threshold Crossing Ale… |
| 1.3.6.1.4.1.2636.3.73.1.1.5.2.1.7 | ColumnjnxoptIfOChGroupSinkCurrentOutputPower | read-only | current | The optical power monitored at the output in the OChGroup. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.2.1.8 | ColumnjnxoptIfOChGroupSinkCurrentLowOutputPower | read-only | current | The lowest optical power monitored at the output in the OChGroup during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.2.1.9 | ColumnjnxoptIfOChGroupSinkCurrentHighOutputPower | read-only | current | The highest optical power monitored at the output in the OChGroup during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.2.1.10 | ColumnjnxoptIfOChGroupSinkCurrentLowerOutputPowerThreshold | read-write | current | The lower limit threshold on the output power. If jnxoptIfOChGroupSinkCurrentOutputPower drops to this value or below, a Threshold Crossing Alert (TCA) should … |
| 1.3.6.1.4.1.2636.3.73.1.1.5.2.1.11 | ColumnjnxoptIfOChGroupSinkCurrentUpperOutputPowerThreshold | read-write | current | The upper limit threshold on the output power. If jnxoptIfOChGroupSinkCurrentOutputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should… |
| 1.3.6.1.4.1.2636.3.73.1.1.5.3 | TablejnxoptIfOChGroupSinkIntervalTable | not-accessible | current | A table of historical OChGroup sink performance monitoring information. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.3.1 | RowjnxoptIfOChGroupSinkIntervalEntry | not-accessible | current | A conceptual row that contains OChGroup sink performance monitoring information of an interface during a particular historical interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.3.1.1 | ColumnjnxoptIfOChGroupSinkIntervalNumber | not-accessible | current | Uniquely identifies the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.3.1.2 | ColumnjnxoptIfOChGroupSinkIntervalSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.3.1.3 | ColumnjnxoptIfOChGroupSinkIntervalLastAggregatedInputPower | read-only | current | The last aggregated optical power of all the DWDM input channels in the OChGroup during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.3.1.4 | ColumnjnxoptIfOChGroupSinkIntervalLowAggregatedInputPower | read-only | current | The lowest aggregated optical power of all the DWDM input channels in the OChGroup during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.3.1.5 | ColumnjnxoptIfOChGroupSinkIntervalHighAggregatedInputPower | read-only | current | The highest aggregated optical power of all the DWDM input channels in the OChGroup during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.3.1.6 | ColumnjnxoptIfOChGroupSinkIntervalLastOutputPower | read-only | current | The last optical power monitored at the output in the OChGroup during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.3.1.7 | ColumnjnxoptIfOChGroupSinkIntervalLowOutputPower | read-only | current | The lowest optical power monitored at the output in the OChGroup during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.3.1.8 | ColumnjnxoptIfOChGroupSinkIntervalHighOutputPower | read-only | current | The highest optical power monitored at the output in the OChGroup during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.4 | TablejnxoptIfOChGroupSinkCurDayTable | not-accessible | current | A table of OChGroup sink performance monitoring information for the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.4.1 | RowjnxoptIfOChGroupSinkCurDayEntry | not-accessible | current | A conceptual row that contains OChGroup sink performance monitoring information of an interface for the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.4.1.1 | ColumnjnxoptIfOChGroupSinkCurDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.4.1.2 | ColumnjnxoptIfOChGroupSinkCurDayLowAggregatedInputPower | read-only | current | The lowest aggregated optical power of all the DWDM input channels in the OChGroup during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.4.1.3 | ColumnjnxoptIfOChGroupSinkCurDayHighAggregatedInputPower | read-only | current | The highest aggregated optical power of all the DWDM input channels in the OChGroup during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.4.1.4 | ColumnjnxoptIfOChGroupSinkCurDayLowOutputPower | read-only | current | The lowest optical power monitored at the output in the OChGroup during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.4.1.5 | ColumnjnxoptIfOChGroupSinkCurDayHighOutputPower | read-only | current | The highest optical power monitored at the output in the OChGroup during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.5 | TablejnxoptIfOChGroupSinkPrevDayTable | not-accessible | current | A table of OChGroup sink performance monitoring information for the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.5.1 | RowjnxoptIfOChGroupSinkPrevDayEntry | not-accessible | current | A conceptual row that contains OChGroup sink performance monitoring information of an interface for the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.5.1.1 | ColumnjnxoptIfOChGroupSinkPrevDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.5.1.2 | ColumnjnxoptIfOChGroupSinkPrevDayLastAggregatedInputPower | read-only | current | The last aggregated optical power of all the DWDM input channels in the OChGroup during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.5.1.3 | ColumnjnxoptIfOChGroupSinkPrevDayLowAggregatedInputPower | read-only | current | The lowest aggregated optical power of all the DWDM input channels in the OChGroup during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.5.1.4 | ColumnjnxoptIfOChGroupSinkPrevDayHighAggregatedInputPower | read-only | current | The highest aggregated optical power of all the DWDM input channels in the OChGroup during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.5.1.5 | ColumnjnxoptIfOChGroupSinkPrevDayLastOutputPower | read-only | current | The last optical power monitored at the output in the OChGroup during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.5.1.6 | ColumnjnxoptIfOChGroupSinkPrevDayLowOutputPower | read-only | current | The lowest optical power monitored at the output in the OChGroup during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.5.1.7 | ColumnjnxoptIfOChGroupSinkPrevDayHighOutputPower | read-only | current | The highest optical power monitored at the output in the OChGroup during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.6 | TablejnxoptIfOChGroupSrcCurrentTable | not-accessible | current | A table of OChGroup source performance monitoring information for the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.6.1 | RowjnxoptIfOChGroupSrcCurrentEntry | not-accessible | current | A conceptual row that contains OChGroup source performance monitoring information of an interface for the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.6.1.1 | ColumnjnxoptIfOChGroupSrcCurrentSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.6.1.2 | ColumnjnxoptIfOChGroupSrcCurrentOutputPower | read-only | current | The optical power monitored at the output. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.6.1.3 | ColumnjnxoptIfOChGroupSrcCurrentLowOutputPower | read-only | current | The lowest optical power monitored at the output during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.6.1.4 | ColumnjnxoptIfOChGroupSrcCurrentHighOutputPower | read-only | current | The highest optical power monitored at the output during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.6.1.5 | ColumnjnxoptIfOChGroupSrcCurrentLowerOutputPowerThreshold | read-write | current | The lower limit threshold on output power. If jnxoptIfOChGroupSrcCurrentOutputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be se… |
| 1.3.6.1.4.1.2636.3.73.1.1.5.6.1.6 | ColumnjnxoptIfOChGroupSrcCurrentUpperOutputPowerThreshold | read-write | current | The upper limit threshold on output power. If jnxoptIfOChGroupSrcCurrentOutputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be s… |
| 1.3.6.1.4.1.2636.3.73.1.1.5.6.1.7 | ColumnjnxoptIfOChGroupSrcCurrentAggregatedInputPower | read-only | current | The aggregated optical power monitored at the input. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.6.1.8 | ColumnjnxoptIfOChGroupSrcCurrentLowAggregatedInputPower | read-only | current | The lowest aggregated optical power monitored at the input during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.6.1.9 | ColumnjnxoptIfOChGroupSrcCurrentHighAggregatedInputPower | read-only | current | The highest aggregated optical power monitored at the input during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.6.1.10 | ColumnjnxoptIfOChGroupSrcCurrentLowerInputPowerThreshold | read-write | current | The lower limit threshold on input power. If jnxoptIfOChGroupSrcCurrentAggregatedInputPower drops to this value or below, a Threshold Crossing Alert (TCA) shou… |
| 1.3.6.1.4.1.2636.3.73.1.1.5.6.1.11 | ColumnjnxoptIfOChGroupSrcCurrentUpperInputPowerThreshold | read-write | current | The upper limit threshold on input power. If jnxoptIfOChGroupSrcCurrentAggregatedInputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) sho… |
| 1.3.6.1.4.1.2636.3.73.1.1.5.7 | TablejnxoptIfOChGroupSrcIntervalTable | not-accessible | current | A table of historical OChGroup source performance monitoring information. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.7.1 | RowjnxoptIfOChGroupSrcIntervalEntry | not-accessible | current | A conceptual row that contains OChGroup source performance monitoring information of an interface during a particular historical interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.7.1.1 | ColumnjnxoptIfOChGroupSrcIntervalNumber | not-accessible | current | Uniquely identifies the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.7.1.2 | ColumnjnxoptIfOChGroupSrcIntervalSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.7.1.3 | ColumnjnxoptIfOChGroupSrcIntervalLastOutputPower | read-only | current | The last optical power monitored at the output during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.7.1.4 | ColumnjnxoptIfOChGroupSrcIntervalLowOutputPower | read-only | current | The lowest optical power monitored at the output during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.7.1.5 | ColumnjnxoptIfOChGroupSrcIntervalHighOutputPower | read-only | current | The highest optical power monitored at the output during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.7.1.6 | ColumnjnxoptIfOChGroupSrcIntervalLastAggregatedInputPower | read-only | current | The last aggregated optical power monitored at the input during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.7.1.7 | ColumnjnxoptIfOChGroupSrcIntervalLowAggregatedInputPower | read-only | current | The lowest aggregated optical power monitored at the input during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.7.1.8 | ColumnjnxoptIfOChGroupSrcIntervalHighAggregatedInputPower | read-only | current | The highest aggregated optical power monitored at the input during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.8 | TablejnxoptIfOChGroupSrcCurDayTable | not-accessible | current | A table of OChGroup source performance monitoring information for the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.8.1 | RowjnxoptIfOChGroupSrcCurDayEntry | not-accessible | current | A conceptual row that contains OChGroup source performance monitoring information of an interface for the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.8.1.1 | ColumnjnxoptIfOChGroupSrcCurDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.8.1.2 | ColumnjnxoptIfOChGroupSrcCurDayLowOutputPower | read-only | current | The lowest optical power monitored at the output during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.8.1.3 | ColumnjnxoptIfOChGroupSrcCurDayHighOutputPower | read-only | current | The highest optical power monitored at the output during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.8.1.4 | ColumnjnxoptIfOChGroupSrcCurDayLowAggregatedInputPower | read-only | current | The lowest aggregated optical power monitored at the input during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.8.1.5 | ColumnjnxoptIfOChGroupSrcCurDayHighAggregatedInputPower | read-only | current | The highest aggregated optical power monitored at the input during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.9 | TablejnxoptIfOChGroupSrcPrevDayTable | not-accessible | current | A table of OChGroup source performance monitoring information for the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.9.1 | RowjnxoptIfOChGroupSrcPrevDayEntry | not-accessible | current | A conceptual row that contains OChGroup source performance monitoring information of an interface for the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.9.1.1 | ColumnjnxoptIfOChGroupSrcPrevDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.9.1.2 | ColumnjnxoptIfOChGroupSrcPrevDayLastOutputPower | read-only | current | The last optical power monitored at the output during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.9.1.3 | ColumnjnxoptIfOChGroupSrcPrevDayLowOutputPower | read-only | current | The lowest optical power monitored at the output during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.9.1.4 | ColumnjnxoptIfOChGroupSrcPrevDayHighOutputPower | read-only | current | The highest optical power monitored at the output during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.9.1.5 | ColumnjnxoptIfOChGroupSrcPrevDayLastAggregatedInputPower | read-only | current | The last aggregated optical power monitored at the input during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.9.1.6 | ColumnjnxoptIfOChGroupSrcPrevDayLowAggregatedInputPower | read-only | current | The lowest aggregated optical power monitored at the input during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.5.9.1.7 | ColumnjnxoptIfOChGroupSrcPrevDayHighAggregatedInputPower | read-only | current | The highest aggregated optical power monitored at the input during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6 | NodejnxoptIfOCh | |||
| 1.3.6.1.4.1.2636.3.73.1.1.6.1 | TablejnxoptIfOChConfigTable | not-accessible | current | A table of OCh configuration information. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.1.1 | RowjnxoptIfOChConfigEntry | not-accessible | current | A conceptual row that contains OCh configuration information of an interface. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.1.1.1 | ColumnjnxoptIfOChDirectionality | read-only | current | Indicates the directionality of the entity. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.1.1.2 | ColumnjnxoptIfOChCurrentStatus | read-only | current | Indicates the defect condition of the entity, if any. This object is applicable when jnxoptIfOChDirectionality has the value sink(1) or bidirectional(3). In fu… |
| 1.3.6.1.4.1.2636.3.73.1.1.6.2 | TablejnxoptIfOChSinkCurrentTable | not-accessible | current | A table of OCh sink performance monitoring information for the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.2.1 | RowjnxoptIfOChSinkCurrentEntry | not-accessible | current | A conceptual row that contains OCh sink performance monitoring information for an interface for the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.2.1.1 | ColumnjnxoptIfOChSinkCurrentSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.2.1.2 | ColumnjnxoptIfOChSinkCurrentInputPower | read-only | current | The optical power monitored at the input. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.2.1.3 | ColumnjnxoptIfOChSinkCurrentLowInputPower | read-only | current | The lowest optical power monitored at the input during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.2.1.4 | ColumnjnxoptIfOChSinkCurrentHighInputPower | read-only | current | The highest optical power monitored at the input during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.2.1.5 | ColumnjnxoptIfOChSinkCurrentLowerInputPowerThreshold | read-write | current | The lower limit threshold on input power. If jnxoptIfOChSinkCurrentInputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.2.1.6 | ColumnjnxoptIfOChSinkCurrentUpperInputPowerThreshold | read-write | current | The upper limit threshold on input power. If jnxoptIfOChSinkCurrentInputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.3 | TablejnxoptIfOChSinkIntervalTable | not-accessible | current | A table of historical OCh sink performance monitoring information. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.3.1 | RowjnxoptIfOChSinkIntervalEntry | not-accessible | current | A conceptual row that contains OCh sink performance monitoring information of an interface during a particular historical interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.3.1.1 | ColumnjnxoptIfOChSinkIntervalNumber | not-accessible | current | Uniquely identifies the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.3.1.2 | ColumnjnxoptIfOChSinkIntervalSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.3.1.3 | ColumnjnxoptIfOChSinkIntervalLastInputPower | read-only | current | The last optical power monitored at the input during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.3.1.4 | ColumnjnxoptIfOChSinkIntervalLowInputPower | read-only | current | The lowest optical power monitored at the input during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.3.1.5 | ColumnjnxoptIfOChSinkIntervalHighInputPower | read-only | current | The highest optical power monitored at the input during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.4 | TablejnxoptIfOChSinkCurDayTable | not-accessible | current | A table of OCh sink performance monitoring information for the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.4.1 | RowjnxoptIfOChSinkCurDayEntry | not-accessible | current | A conceptual row that contains OCh sink performance monitoring information of an interface for the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.4.1.1 | ColumnjnxoptIfOChSinkCurDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.4.1.2 | ColumnjnxoptIfOChSinkCurDayLowInputPower | read-only | current | The lowest optical power monitored at the input during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.4.1.3 | ColumnjnxoptIfOChSinkCurDayHighInputPower | read-only | current | The highest optical power monitored at the input during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.5 | TablejnxoptIfOChSinkPrevDayTable | not-accessible | current | A table of OCh sink performance monitoring information for the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.5.1 | RowjnxoptIfOChSinkPrevDayEntry | not-accessible | current | A conceptual row that contains OCh sink performance monitoring information of an interface for the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.5.1.1 | ColumnjnxoptIfOChSinkPrevDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.5.1.2 | ColumnjnxoptIfOChSinkPrevDayLastInputPower | read-only | current | The last optical power monitored at the input during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.5.1.3 | ColumnjnxoptIfOChSinkPrevDayLowInputPower | read-only | current | The lowest optical power monitored at the input during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.5.1.4 | ColumnjnxoptIfOChSinkPrevDayHighInputPower | read-only | current | The highest optical power monitored at the input during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.6 | TablejnxoptIfOChSrcCurrentTable | not-accessible | current | A table of OCh source performance monitoring information for the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.6.1 | RowjnxoptIfOChSrcCurrentEntry | not-accessible | current | A conceptual row that contains OCh source performance monitoring information of an interface for the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.6.1.1 | ColumnjnxoptIfOChSrcCurrentSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.6.1.2 | ColumnjnxoptIfOChSrcCurrentOutputPower | read-only | current | The optical power monitored at the output. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.6.1.3 | ColumnjnxoptIfOChSrcCurrentLowOutputPower | read-only | current | The lowest optical power monitored at the output during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.6.1.4 | ColumnjnxoptIfOChSrcCurrentHighOutputPower | read-only | current | The highest optical power monitored at the output during the current 15-minute interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.6.1.5 | ColumnjnxoptIfOChSrcCurrentLowerOutputPowerThreshold | read-write | current | The lower limit threshold on output power. If jnxoptIfOChSrcCurrentOutputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.6.1.6 | ColumnjnxoptIfOChSrcCurrentUpperOutputPowerThreshold | read-write | current | The upper limit threshold on output power. If jnxoptIfOChSrcCurrentOutputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.7 | TablejnxoptIfOChSrcIntervalTable | not-accessible | current | A table of historical OCh source performance monitoring information. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.7.1 | RowjnxoptIfOChSrcIntervalEntry | not-accessible | current | A conceptual row that contains OCh source performance monitoring information of an interface during a particular historical interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.7.1.1 | ColumnjnxoptIfOChSrcIntervalNumber | not-accessible | current | Uniquely identifies the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.7.1.2 | ColumnjnxoptIfOChSrcIntervalSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.7.1.3 | ColumnjnxoptIfOChSrcIntervalLastOutputPower | read-only | current | The last optical power monitored at the output during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.7.1.4 | ColumnjnxoptIfOChSrcIntervalLowOutputPower | read-only | current | The lowest optical power monitored at the output during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.7.1.5 | ColumnjnxoptIfOChSrcIntervalHighOutputPower | read-only | current | The highest optical power monitored at the output during the interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.8 | TablejnxoptIfOChSrcCurDayTable | not-accessible | current | A table of OCh source performance monitoring information for the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.8.1 | RowjnxoptIfOChSrcCurDayEntry | not-accessible | current | A conceptual row that contains OCh source performance monitoring information of an interface for the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.8.1.1 | ColumnjnxoptIfOChSrcCurDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.8.1.2 | ColumnjnxoptIfOChSrcCurDayLowOutputPower | read-only | current | The lowest optical power monitored at the output during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.8.1.3 | ColumnjnxoptIfOChSrcCurDayHighOutputPower | read-only | current | The highest optical power monitored at the output during the current 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.9 | TablejnxoptIfOChSrcPrevDayTable | not-accessible | current | A table of OCh source performance monitoring information for the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.9.1 | RowjnxoptIfOChSrcPrevDayEntry | not-accessible | current | A conceptual row that contains OCh source performance monitoring information of an interface for the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.9.1.1 | ColumnjnxoptIfOChSrcPrevDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.9.1.2 | ColumnjnxoptIfOChSrcPrevDayLastOutputPower | read-only | current | The last optical power monitored at the output during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.9.1.3 | ColumnjnxoptIfOChSrcPrevDayLowOutputPower | read-only | current | The lowest optical power monitored at the output during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.6.9.1.4 | ColumnjnxoptIfOChSrcPrevDayHighOutputPower | read-only | current | The highest optical power monitored at the output during the previous 24-hour interval. |
| 1.3.6.1.4.1.2636.3.73.1.1.7 | NodejnxoptIfOTUk | |||
| 1.3.6.1.4.1.2636.3.73.1.1.7.1 | TablejnxoptIfOTUkConfigTable | not-accessible | current | A table of OTUk configuration information. |
| 1.3.6.1.4.1.2636.3.73.1.1.7.1.1 | RowjnxoptIfOTUkConfigEntry | not-accessible | current | A conceptual row that contains OTUk configuration information of an interface. |
| 1.3.6.1.4.1.2636.3.73.1.1.7.1.1.1 | ColumnjnxoptIfOTUkDirectionality | read-only | current | Indicates the directionality of the entity. |
| 1.3.6.1.4.1.2636.3.73.1.1.7.1.1.2 | ColumnjnxoptIfOTUkBitRateK | read-only | current | Indicates the bit rate of the entity. |
| 1.3.6.1.4.1.2636.3.73.1.1.7.1.1.3 | ColumnjnxoptIfOTUkTraceIdentifierTransmitted | read-write | current | The trace identifier transmitted. This object is applicable when jnxoptIfOTUkDirectionality has the value source(2) or bidirectional(3). It must not be instant… |
| 1.3.6.1.4.1.2636.3.73.1.1.7.1.1.4 | ColumnjnxoptIfOTUkDAPIExpected | read-write | current | The DAPI expected by the receiver. This object is only applicable to the sink function, i.e., only when jnxoptIfOTUkDirectionality has the value sink(1) or bid… |
| 1.3.6.1.4.1.2636.3.73.1.1.7.1.1.5 | ColumnjnxoptIfOTUkSAPIExpected | read-write | current | The SAPI expected by the receiver. This object is only applicable to the sink function, i.e., only when jnxoptIfOTUkDirectionality has the value sink(1) or bid… |
| 1.3.6.1.4.1.2636.3.73.1.1.7.1.1.6 | ColumnjnxoptIfOTUkTraceIdentifierAccepted | read-only | current | The actual trace identifier accepted. This object is only applicable to the sink function, i.e., only when jnxoptIfOTUkDirectionality has the value sink(1) or … |
| 1.3.6.1.4.1.2636.3.73.1.1.7.1.1.7 | ColumnjnxoptIfOTUkTIMDetMode | read-write | current | Indicates the mode of the Trace Identifier Mismatch (TIM) Detection function. This object is only applicable to the sink function, i.e., only when jnxoptIfOTUk… |
| 1.3.6.1.4.1.2636.3.73.1.1.7.1.1.8 | ColumnjnxoptIfOTUkTIMActEnabled | read-write | current | Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. This object is only applicable to the sink function, i.e., only wh… |
| 1.3.6.1.4.1.2636.3.73.1.1.7.1.1.9 | ColumnjnxoptIfOTUkDEGThr | read-write | current | Indicates the threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected errored b… |
| 1.3.6.1.4.1.2636.3.73.1.1.7.1.1.10 | ColumnjnxoptIfOTUkDEGM | read-write | current | Indicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if jnxoptIfOTUkDEGM consecutive bad PM Seconds are detect… |
| 1.3.6.1.4.1.2636.3.73.1.1.7.1.1.11 | ColumnjnxoptIfOTUkSinkAdaptActive | read-write | current | Indicates whether the sink adaptation function is activated or not. This object is only applicable to the sink function, i.e., only when jnxoptIfOTUkDirectiona… |
| 1.3.6.1.4.1.2636.3.73.1.1.7.1.1.12 | ColumnjnxoptIfOTUkSourceAdaptActive | read-write | current | Indicates whether the source adaptation function is activated or not. This object is only applicable to the source function, i.e., only when jnxoptIfOTUkDirect… |
| 1.3.6.1.4.1.2636.3.73.1.1.7.1.1.13 | ColumnjnxoptIfOTUkSinkFECEnabled | read-write | current | If Forward Error Correction (FEC) is supported, this object indicates whether FEC at the OTUk sink adaptation function is enabled or not. This object is only a… |
| 1.3.6.1.4.1.2636.3.73.1.1.7.1.1.14 | ColumnjnxoptIfOTUkCurrentStatus | read-only | current | Indicates the defect condition of the entity, if any. This object is only applicable to the sink function, i.e., only when jnxoptIfOTUkDirectionality has the v… |
| 1.3.6.1.4.1.2636.3.73.1.1.7.2 | TablejnxoptIfGCC0ConfigTable | not-accessible | current | A table of GCC0 configuration information. |
| 1.3.6.1.4.1.2636.3.73.1.1.7.2.1 | RowjnxoptIfGCC0ConfigEntry | not-accessible | current | A conceptual row that contains GCC0 configuration information of an interface. Each instance must correspond to an instance of jnxoptIfOTUkConfigEntry. Separat… |
| 1.3.6.1.4.1.2636.3.73.1.1.7.2.1.1 | ColumnjnxoptIfGCC0Directionality | not-accessible | current | Indicates the directionality of the entity. The values source(2) and bidirectional(3) are not allowed if the corresponding instance of jnxoptIfOTUkDirectionali… |
| 1.3.6.1.4.1.2636.3.73.1.1.7.2.1.2 | ColumnjnxoptIfGCC0Application | read-create | current | Indicates the application transported by the GCC0 entity. Example applications are ECC, User data channel. The value of this object may not be changed when jnx… |
| 1.3.6.1.4.1.2636.3.73.1.1.7.2.1.3 | ColumnjnxoptIfGCC0RowStatus | read-create | current | This columnar object is used for creating and deleting a conceptual row of the jnxoptIfGCC0 config table. It is used to model the addGCC0Access and removeGCC0A… |
| 1.3.6.1.4.1.2636.3.73.1.1.8 | NodejnxoptIfODUk | |||
| 1.3.6.1.4.1.2636.3.73.1.1.8.1 | TablejnxoptIfODUkConfigTable | not-accessible | current | A table of ODUk configuration information. |
| 1.3.6.1.4.1.2636.3.73.1.1.8.1.1 | RowjnxoptIfODUkConfigEntry | not-accessible | current | A conceptual row that contains ODUk configuration information of an interface. |
| 1.3.6.1.4.1.2636.3.73.1.1.8.1.1.1 | ColumnjnxoptIfODUkDirectionality | read-only | current | Indicates the directionality of the entity. |
| 1.3.6.1.4.1.2636.3.73.1.1.8.1.1.2 | ColumnjnxoptIfODUkBitRateK | read-only | current | Indicates the bit rate of the entity. |
| 1.3.6.1.4.1.2636.3.73.1.1.8.1.1.3 | ColumnjnxoptIfODUkTcmFieldsInUse | read-only | current | Indicates the TCM field(s) that are currently in use. The positions of the bits correspond to the TCM fields. A bit that is set to 1 means that the correspondi… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.1.1.4 | ColumnjnxoptIfODUkPositionSeqCurrentSize | read-only | current | This variable indicates the current size of the position sequence (i.e., number of TCM function and/or GCC12 access that have been created in the ODUk interfac… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.1.1.5 | ColumnjnxoptIfODUkTtpPresent | read-only | current | This object has the value true(1) if the ifEntry under which it is instantiated contains an ODUk Trail Termination Point, i.e., is the endpoint of an ODUk path… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.2 | TablejnxoptIfODUkTtpConfigTable | not-accessible | current | A table of ODUk TTP configuration information. |
| 1.3.6.1.4.1.2636.3.73.1.1.8.2.1 | RowjnxoptIfODUkTtpConfigEntry | not-accessible | current | A conceptual row that contains ODUk TTP configuration information of an interface. |
| 1.3.6.1.4.1.2636.3.73.1.1.8.2.1.1 | ColumnjnxoptIfODUkTtpTraceIdentifierTransmitted | read-write | current | The trace identifier transmitted. This object is applicable when jnxoptIfODUkDirectionality has the value source(2) or bidirectional(3). It must not be instant… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.2.1.2 | ColumnjnxoptIfODUkTtpDAPIExpected | read-write | current | The DAPI expected by the receiver. This object is only applicable to the sink function, i.e., only when jnxoptIfODUkDirectionality has the value sink(1) or bid… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.2.1.3 | ColumnjnxoptIfODUkTtpSAPIExpected | read-write | current | The SAPI expected by the receiver. This object is only applicable to the sink function, i.e., only when jnxoptIfODUkDirectionality has the value sink(1) or bid… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.2.1.4 | ColumnjnxoptIfODUkTtpTraceIdentifierAccepted | read-only | current | The actual trace identifier accepted. This object is only applicable to the sink function, i.e., only when jnxoptIfODUkDirectionality has the value sink(1) or … |
| 1.3.6.1.4.1.2636.3.73.1.1.8.2.1.5 | ColumnjnxoptIfODUkTtpTIMDetMode | read-write | current | Indicates the mode of the Trace Identifier Mismatch (TIM) Detection function. This object is only applicable to the sink function, i.e., only when jnxoptIfODUk… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.2.1.6 | ColumnjnxoptIfODUkTtpTIMActEnabled | read-write | current | Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. This object is only applicable to the sink function, i.e., only wh… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.2.1.7 | ColumnjnxoptIfODUkTtpDEGThr | read-write | current | Indicates the threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected errored b… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.2.1.8 | ColumnjnxoptIfODUkTtpDEGM | read-write | current | Indicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if jnxoptIfODUkDEGM consecutive bad PM Seconds are detect… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.2.1.9 | ColumnjnxoptIfODUkTtpCurrentStatus | read-only | current | Indicates the defect condition of the entity, if any. This object is only applicable to the sink function, i.e., only when jnxoptIfODUkDirectionality has the v… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.3 | TablejnxoptIfODUkPositionSeqTable | not-accessible | current | A table of ODUk Position Sequence information. |
| 1.3.6.1.4.1.2636.3.73.1.1.8.3.1 | RowjnxoptIfODUkPositionSeqEntry | not-accessible | current | A conceptual row that contains ODUk position sequence information of an ODUk interface. The ODUk interface is identified by the ifIndex. Associated with each O… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.3.1.1 | ColumnjnxoptIfODUkPositionSeqIndex | not-accessible | current | This variable identifies a row in the jnxoptIfODUkPositionSeqTable Table. Each row of the jnxoptIfODUkPositionSeqTable Table represents a TCM or GCC12 access f… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.3.1.2 | ColumnjnxoptIfODUkPositionSeqPosition | read-only | current | This variable indicates the position of the TCM or GCC12 access function within the sequence of TCMs & GCC12 access functions of the associated ODUk interface.… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.3.1.3 | ColumnjnxoptIfODUkPositionSeqPointer | read-only | current | This variable identifies the TCM or GCC12 access function by pointing to the corresponding jnxoptIfODUkT or jnxoptIfGCC12 entity. |
| 1.3.6.1.4.1.2636.3.73.1.1.8.4 | TablejnxoptIfODUkNimConfigTable | not-accessible | current | A table of ODUkNim configuration information. |
| 1.3.6.1.4.1.2636.3.73.1.1.8.4.1 | RowjnxoptIfODUkNimConfigEntry | not-accessible | current | A conceptual row that contains ODUkNim configuration information of an interface. Each instance must correspond to an instance of jnxoptIfODUkConfigEntry for w… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.4.1.1 | ColumnjnxoptIfODUkNimDirectionality | not-accessible | current | Specifies the monitor point for the ODUk Path non-intrusive monitoring function. The value source(2) is not allowed if the corresponding instance of jnxoptIfOD… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.4.1.2 | ColumnjnxoptIfODUkNimDAPIExpected | read-create | current | The DAPI expected by the receiver. This object has no effect if jnxoptIfODUkNimTIMDetMode has the value off(1) or sapi(3). |
| 1.3.6.1.4.1.2636.3.73.1.1.8.4.1.3 | ColumnjnxoptIfODUkNimSAPIExpected | read-create | current | The SAPI expected by the receiver. This object has no effect if jnxoptIfODUkNimTIMDetMode has the value off(1) or dapi(2). |
| 1.3.6.1.4.1.2636.3.73.1.1.8.4.1.4 | ColumnjnxoptIfODUkNimTraceIdentifierAccepted | read-only | current | The actual trace identifier accepted. The value of this object is unspecified if jnxoptIfODUkNimCurrentStatus has any of the bit positions oci(0), lck(1), or s… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.4.1.5 | ColumnjnxoptIfODUkNimTIMDetMode | read-create | current | Indicates the mode of the Trace Identifier Mismatch (TIM) Detection function. |
| 1.3.6.1.4.1.2636.3.73.1.1.8.4.1.6 | ColumnjnxoptIfODUkNimTIMActEnabled | read-create | current | Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. |
| 1.3.6.1.4.1.2636.3.73.1.1.8.4.1.7 | ColumnjnxoptIfODUkNimDEGThr | read-create | current | Indicates the threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected errored b… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.4.1.8 | ColumnjnxoptIfODUkNimDEGM | read-create | current | Indicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if jnxoptIfODUkNimDEGM consecutive bad PM Seconds are det… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.4.1.9 | ColumnjnxoptIfODUkNimCurrentStatus | read-only | current | Indicates the defect condition of the entity, if any. The value of this object is unspecified if jnxoptIfODUkNimRowStatus has any value other than active(1). |
| 1.3.6.1.4.1.2636.3.73.1.1.8.4.1.10 | ColumnjnxoptIfODUkNimRowStatus | read-create | current | This columnar object is used for creating and deleting a conceptual row of the jnxoptIfODUkNim config table. It is used to model the activateNim and deactivate… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.5 | TablejnxoptIfGCC12ConfigTable | not-accessible | current | A table of GCC12 configuration information. The GCC function processes the GCC overhead bytes passing through them but leave the remainder of the ODUk overhead… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.5.1 | RowjnxoptIfGCC12ConfigEntry | not-accessible | current | A conceptual row that contains GCC12 configuration information of an interface. Each instance must correspond to an instance of jnxoptIfODUkConfigEntry. Separa… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.5.1.1 | ColumnjnxoptIfGCC12Codirectional | not-accessible | current | Indicates the directionality of the GCC12 termination with respect to the associated ODUk CTP. The value true(1) means that the sink part of the GCC12 extracts… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.5.1.2 | ColumnjnxoptIfGCC12GCCAccess | not-accessible | current | Indicates the GCC access represented by the entity. |
| 1.3.6.1.4.1.2636.3.73.1.1.8.5.1.3 | ColumnjnxoptIfGCC12GCCPassThrough | read-create | current | Controls whether the selected GCC overhead bytes are passed through or modified. The value true(1) means that the selected GCC overhead bytes are passed throug… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.5.1.4 | ColumnjnxoptIfGCC12Application | read-create | current | Indicates the application transported by the GCC12 entity. Example applications are ECC, User data channel. The value of this object may not be changed when jn… |
| 1.3.6.1.4.1.2636.3.73.1.1.8.5.1.5 | ColumnjnxoptIfGCC12RowStatus | read-create | current | This columnar object is used for creating and deleting a conceptual row of the jnxoptIfGCC12 config table. It is used to model the addGCC12Access and removeGCC… |
| 1.3.6.1.4.1.2636.3.73.1.1.9 | NodejnxoptIfODUkT | |||
| 1.3.6.1.4.1.2636.3.73.1.1.9.1 | TablejnxoptIfODUkTConfigTable | not-accessible | current | A table of ODUkT configuration information. |
| 1.3.6.1.4.1.2636.3.73.1.1.9.1.1 | RowjnxoptIfODUkTConfigEntry | not-accessible | current | A conceptual row that contains ODUkT configuration information of an interface. Each instance must correspond to an instance of jnxoptIfODUkConfigEntry. Rows i… |
| 1.3.6.1.4.1.2636.3.73.1.1.9.1.1.1 | ColumnjnxoptIfODUkTTcmField | not-accessible | current | Indicates the tandem connection monitoring field of the ODUk OH. Valid values are integers from 1 to 6. |
| 1.3.6.1.4.1.2636.3.73.1.1.9.1.1.2 | ColumnjnxoptIfODUkTCodirectional | not-accessible | current | Indicates the directionality of the ODUkT termination point with respect to the associated ODUk CTP. The value true(1) means that the sink part of the ODUkT TP… |
| 1.3.6.1.4.1.2636.3.73.1.1.9.1.1.3 | ColumnjnxoptIfODUkTTraceIdentifierTransmitted | read-create | current | The trace identifier transmitted. This object is applicable only to the following three cases. (i) jnxoptIfODUkDirectionality has the value bidirectional(3), o… |
| 1.3.6.1.4.1.2636.3.73.1.1.9.1.1.4 | ColumnjnxoptIfODUkTDAPIExpected | read-create | current | The DAPI expected by the receiver. This object is applicable only to the following three cases. (i) jnxoptIfODUkDirectionality has the value bidirectional(3), … |
| 1.3.6.1.4.1.2636.3.73.1.1.9.1.1.5 | ColumnjnxoptIfODUkTSAPIExpected | read-create | current | The SAPI expected by the receiver. This object is applicable only to the following three cases. (i) jnxoptIfODUkDirectionality has the value bidirectional(3), … |
| 1.3.6.1.4.1.2636.3.73.1.1.9.1.1.6 | ColumnjnxoptIfODUkTTraceIdentifierAccepted | read-only | current | The actual trace identifier accepted. This object is applicable only to the following three cases. (i) jnxoptIfODUkDirectionality has the value bidirectional(3… |
| 1.3.6.1.4.1.2636.3.73.1.1.9.1.1.7 | ColumnjnxoptIfODUkTTIMDetMode | read-create | current | Indicates the mode of the Trace Identifier Mismatch (TIM) Detection function. This object is applicable only to the following three cases. (i) jnxoptIfODUkDire… |
| 1.3.6.1.4.1.2636.3.73.1.1.9.1.1.8 | ColumnjnxoptIfODUkTTIMActEnabled | read-create | current | Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. This object is applicable only to the following three cases. (i) j… |
| 1.3.6.1.4.1.2636.3.73.1.1.9.1.1.9 | ColumnjnxoptIfODUkTDEGThr | read-create | current | Indicates the threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected errored b… |
| 1.3.6.1.4.1.2636.3.73.1.1.9.1.1.10 | ColumnjnxoptIfODUkTDEGM | read-create | current | Indicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if jnxoptIfODUkTDEGM consecutive bad PM Seconds are detec… |
| 1.3.6.1.4.1.2636.3.73.1.1.9.1.1.11 | ColumnjnxoptIfODUkTSinkMode | read-create | current | This variable specifies the TCM mode at the entity. The value operational(1) means that TCM Overhead (TCMOH) processes (see ITU-T G.798) shall be performed and… |
| 1.3.6.1.4.1.2636.3.73.1.1.9.1.1.12 | ColumnjnxoptIfODUkTSinkLockSignalAdminState | read-create | current | Provides the capability to provision the LOCK signal, which is one of the ODUk maintenance signals, at the ODUKT sink. When a Tandem Connection endpoint is set… |
| 1.3.6.1.4.1.2636.3.73.1.1.9.1.1.13 | ColumnjnxoptIfODUkTSourceLockSignalAdminState | read-create | current | Provides the capability to provision the LOCK signal, which is one of the ODUk maintenance signals, at the source. When a Tandem Connection endpoint is set to … |
| 1.3.6.1.4.1.2636.3.73.1.1.9.1.1.14 | ColumnjnxoptIfODUkTCurrentStatus | read-only | current | Indicates the defect condition of the entity, if any. This object is applicable only when either one of the following three cases holds: (i) jnxoptIfODUkDirect… |
| 1.3.6.1.4.1.2636.3.73.1.1.9.1.1.15 | ColumnjnxoptIfODUkTRowStatus | read-create | current | This columnar object is used for creating and deleting a conceptual row of the jnxoptIfODUkT config table. It is used to model the addTCM and removeTCM operati… |
| 1.3.6.1.4.1.2636.3.73.1.1.9.2 | TablejnxoptIfODUkTNimConfigTable | not-accessible | current | A table of ODUkTNim configuration information. |
| 1.3.6.1.4.1.2636.3.73.1.1.9.2.1 | RowjnxoptIfODUkTNimConfigEntry | not-accessible | current | A conceptual row that contains ODUkTNim configuration information of an interface. Each instance must correspond to an instance of jnxoptIfODUkConfigEntry. Row… |
| 1.3.6.1.4.1.2636.3.73.1.1.9.2.1.1 | ColumnjnxoptIfODUkTNimTcmField | not-accessible | current | Indicates the tandem connection monitoring field of the ODUk OH on which non-intrusive monitoring is performed. Valid values are integers from 1 to 6. |
| 1.3.6.1.4.1.2636.3.73.1.1.9.2.1.2 | ColumnjnxoptIfODUkTNimDirectionality | not-accessible | current | Specifies the monitor point for the ODUk TCM non-intrusive monitoring function. The value source(2) is not allowed if the corresponding instance of jnxoptIfODU… |
| 1.3.6.1.4.1.2636.3.73.1.1.9.2.1.3 | ColumnjnxoptIfODUkTNimDAPIExpected | read-create | current | The DAPI expected by the receiver. This object has no effect if jnxoptIfODUkTNimTIMDetMode has the value off(1) or sapi(3). |
| 1.3.6.1.4.1.2636.3.73.1.1.9.2.1.4 | ColumnjnxoptIfODUkTNimSAPIExpected | read-create | current | The SAPI expected by the receiver. This object has no effect if jnxoptIfODUkTNimTIMDetMode has the value off(1) or dapi(2). |
| 1.3.6.1.4.1.2636.3.73.1.1.9.2.1.5 | ColumnjnxoptIfODUkTNimTraceIdentifierAccepted | read-only | current | The actual trace identifier accepted. The value of this object is unspecified if jnxoptIfODUkTNimCurrentStatus has any of the bit positions oci(0), lck(1), or … |
| 1.3.6.1.4.1.2636.3.73.1.1.9.2.1.6 | ColumnjnxoptIfODUkTNimTIMDetMode | read-create | current | Indicates the mode of the Trace Identifier Mismatch (TIM) Detection function. |
| 1.3.6.1.4.1.2636.3.73.1.1.9.2.1.7 | ColumnjnxoptIfODUkTNimTIMActEnabled | read-create | current | Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. |
| 1.3.6.1.4.1.2636.3.73.1.1.9.2.1.8 | ColumnjnxoptIfODUkTNimDEGThr | read-create | current | Indicates the threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected errored b… |
| 1.3.6.1.4.1.2636.3.73.1.1.9.2.1.9 | ColumnjnxoptIfODUkTNimDEGM | read-create | current | Indicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if jnxoptIfODUkTNimDEGM consecutive bad PM Seconds are de… |
| 1.3.6.1.4.1.2636.3.73.1.1.9.2.1.10 | ColumnjnxoptIfODUkTNimCurrentStatus | read-only | current | Indicates the defect condition of the entity, if any. The value of this object is unspecified if jnxoptIfODUkTNimRowStatus has any value other than active(1). |
| 1.3.6.1.4.1.2636.3.73.1.1.9.2.1.11 | ColumnjnxoptIfODUkTNimRowStatus | read-create | current | This columnar object is used for creating and deleting a conceptual row of the jnxoptIfODUkTNim config table. It is used to model the addTCM and removeTCM oper… |
| 1.3.6.1.4.1.2636.3.73.1.2 | NodejnxoptIfConfs | |||
| 1.3.6.1.4.1.2636.3.73.1.2.1 | NodejnxoptIfGroups | |||
| 1.3.6.1.4.1.2636.3.73.1.2.1.1 | GroupjnxoptIfOTMnGroup | current | A collection of OTMn structure information objects. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.2 | GroupjnxoptIfPerfMonGroup | current | A collection of performance monitoring interval objects. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.3 | GroupjnxoptIfOTSnCommonGroup | current | A collection of configuration objects applicable to all OTSn interfaces. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.4 | GroupjnxoptIfOTSnSourceGroupFull | current | A collection of configuration objects applicable to full-functionality/IaDI OTSn interfaces that support source functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.5 | GroupjnxoptIfOTSnAPRStatusGroup | current | A collection of objects applicable to OTSn interfaces that support Automatic Power Reduction functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.6 | GroupjnxoptIfOTSnAPRControlGroup | current | A collection of objects applicable to OTSn interfaces that provide Automatic Power Reduction control functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.7 | GroupjnxoptIfOTSnSinkGroupBasic | current | A collection of configuration objects applicable to all OTSn interfaces that support sink functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.8 | GroupjnxoptIfOTSnSinkGroupFull | current | A collection of configuration objects applicable to full-functionality/IaDI OTSn interfaces that support sink functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.9 | GroupjnxoptIfOTSnSinkPreOtnPMGroup | current | A collection of pre-OTN performance monitoring objects applicable to OTSn interfaces that support sink functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.10 | GroupjnxoptIfOTSnSinkPreOtnPMThresholdGroup | current | A collection of pre-OTN performance monitoring threshold objects applicable to OTSn interfaces that support sink functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.11 | GroupjnxoptIfOTSnSourcePreOtnPMGroup | current | A collection of pre-OTN performance monitoring objects applicable to OTSn interfaces that support source functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.12 | GroupjnxoptIfOTSnSourcePreOtnPMThresholdGroup | current | A collection of pre-OTN performance monitoring threshold objects applicable to OTSn interfaces that support source functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.13 | GroupjnxoptIfOMSnCommonGroup | current | A collection of configuration objects applicable to all OMSn interfaces. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.14 | GroupjnxoptIfOMSnSinkGroupBasic | current | A collection of configuration objects applicable to all OMSn interfaces that support sink functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.15 | GroupjnxoptIfOMSnSinkPreOtnPMGroup | current | A collection of pre-OTN performance monitoring objects applicable to OMSn interfaces that support sink functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.16 | GroupjnxoptIfOMSnSinkPreOtnPMThresholdGroup | current | A collection of pre-OTN performance monitoring threshold objects applicable to OMSn interfaces that support sink functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.17 | GroupjnxoptIfOMSnSourcePreOtnPMGroup | current | A collection of pre-OTN performance monitoring objects applicable to OMSn interfaces that support source functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.18 | GroupjnxoptIfOMSnSourcePreOtnPMThresholdGroup | current | A collection of pre-OTN performance monitoring threshold objects applicable to OMSn interfaces that that support source functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.19 | GroupjnxoptIfOChGroupCommonGroup | current | A collection of configuration objects applicable to all OChGroup interfaces. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.20 | GroupjnxoptIfOChGroupSinkPreOtnPMGroup | current | A collection of pre-OTN performance monitoring objects applicable to OChGroup interfaces that support sink functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.21 | GroupjnxoptIfOChGroupSinkPreOtnPMThresholdGroup | current | A collection of pre-OTN performance monitoring threshold objects applicable to OChGroup interfaces that support sink functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.22 | GroupjnxoptIfOChGroupSourcePreOtnPMGroup | current | A collection of pre-OTN performance monitoring objects applicable to OChGroup interfaces that support source functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.23 | GroupjnxoptIfOChGroupSourcePreOtnPMThresholdGroup | current | A collection of pre-OTN performance monitoring threshold objects applicable to OChGroup interfaces that that support source functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.24 | GroupjnxoptIfOChCommonGroup | current | A collection of configuration objects applicable to all OCh interfaces. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.25 | GroupjnxoptIfOChSinkGroupBasic | current | A collection of configuration objects applicable to all OCh interfaces that support sink functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.26 | GroupjnxoptIfOChSinkPreOtnPMGroup | current | A collection of pre-OTN performance monitoring objects applicable to OCh interfaces that support sink functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.27 | GroupjnxoptIfOChSinkPreOtnPMThresholdGroup | current | A collection of pre-OTN performance monitoring threshold objects applicable to OCh interfaces that support sink functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.28 | GroupjnxoptIfOChSourcePreOtnPMGroup | current | A collection of pre-OTN performance monitoring objects applicable to OCh interfaces that support source functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.29 | GroupjnxoptIfOChSourcePreOtnPMThresholdGroup | current | A collection of pre-OTN performance monitoring threshold objects applicable to OCh interfaces that support source functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.30 | GroupjnxoptIfOTUkCommonGroup | current | A collection of configuration objects applicable to all OTUk interfaces. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.31 | GroupjnxoptIfOTUkSourceGroup | current | A collection of configuration objects applicable to OTUk interfaces that support source functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.32 | GroupjnxoptIfOTUkSinkGroup | current | A collection of configuration objects applicable to OTUk interfaces that support sink functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.33 | GroupjnxoptIfGCC0Group | current | A collection of GCC0 configuration objects. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.34 | GroupjnxoptIfODUkGroup | current | A collection of configuration objects applicable to all ODUk interfaces. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.35 | GroupjnxoptIfODUkTtpSourceGroup | current | A collection of configuration objects applicable to all interfaces that support ODUk trail termination source functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.36 | GroupjnxoptIfODUkTtpSinkGroup | current | A collection of ODUk configuration objects applicable to all interfaces that support ODUk trail termination sink functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.37 | GroupjnxoptIfODUkNimGroup | current | A collection of ODUk Nim configuration objects. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.38 | GroupjnxoptIfGCC12Group | current | A collection of GCC12 configuration objects. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.39 | GroupjnxoptIfODUkTCommonGroup | current | A collection of configuration objects applicable to all ODUkT instances. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.40 | GroupjnxoptIfODUkTSourceGroup | current | A collection of configuration objects applicable to all ODUkT instances that provide source functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.41 | GroupjnxoptIfODUkTSinkGroup | current | A collection of configuration objects applicable to all ODUkT instances that provide sink functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.42 | GroupjnxoptIfODUkTSinkGroupCtp | current | A collection of configuration objects applicable to ODUkT instances not colocated with an ODUk TTP that provide sink functions. | |
| 1.3.6.1.4.1.2636.3.73.1.2.1.43 | GroupjnxoptIfODUkTNimGroup | current | A collection of ODUkT Nim configuration objects. | |
| 1.3.6.1.4.1.2636.3.73.1.2.2 | NodejnxoptIfCompl | |||
| 1.3.6.1.4.1.2636.3.73.1.2.2.1 | CompliancejnxoptIfOtnConfigCompl | current | Implementation requirements for the OTN configuration functions defined in this MIB module. | |
| 1.3.6.1.4.1.2636.3.73.1.2.2.2 | CompliancejnxoptIfPreOtnPMCompl | current | Implementation requirements for Pre-OTN performance monitoring functions defined in this MIB module. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| JnxoptIfAcTI | OCTET STRING (SIZE(64)) | current | The trace identifier (TI) accepted at the receiver. |
| JnxoptIfBitRateK | Integer32 | current | Indicates the index that is used to represent a supported bit rate and the different versions of OPUk, ODUk and OTUk. Allowed values of k are defined in ITU-T G.709. Currently allowed values in G.709 are: k=1 represents… |
| JnxoptIfDEGM | Unsigned32 (2..10) | current | Indicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if JnxoptIfDEGM consecutive bad PM Seconds are detected. |
| JnxoptIfDEGThr | Unsigned32 (1..100) | current | Indicates the threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected errored blocks in that second is greater than or equal to JnxoptIfDEG… |
| JnxoptIfDirectionality | INTEGER { sink(1), source(2), bidirectional(3) } | current | Indicates the directionality of an entity. |
| JnxoptIfExDAPI | OCTET STRING (SIZE(16)) | current | The Destination Access Point Identifier (DAPI) expected by the receiver. |
| JnxoptIfExSAPI | OCTET STRING (SIZE(16)) | current | The Source Access Point Identifier (SAPI) expected by the receiver. |
| JnxoptIfIntervalNumber | Unsigned32 (1..96) | current | Uniquely identifies a 15-minute interval. The interval identified by 1 is the most recently completed interval, and the interval identified by n is the interval immediately preceding the one identified by n-1. |
| JnxoptIfSinkOrSource | INTEGER { sink(1), source(2) } | current | Indicates the directionality of an entity that is allowed only to be a source or sink. |
| JnxoptIfTIMDetMode | INTEGER { off(1), dapi(2), sapi(3), both(4) } | current | Indicates the mode of the Trace Identifier Mismatch (TIM) Detection function. |
| JnxoptIfTxTI | OCTET STRING (SIZE(64)) | current | The trace identifier (TI) transmitted. |