JNX-PPPOE-MIB
108 objects
The Point-to-Point Protocol over Ethernet (PPPoE) MIB for the Junos product family. This MIB contains managed objects for each of two interface layers: PPPoE interfaces, and PPPoE subinterfaces. For each of these layers, management objects are provided to query for an available interface index, and to create/delete interfaces of that type.
Imported Objects
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| JUNIPER-SMI | jnxPppoeMibRoot |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.67.1 | IdentityjnxPPPoEMIB | The Point-to-Point Protocol over Ethernet (PPPoE) MIB for the Junos product family. This MIB contains managed objects for each of two interface layers: PPPoE i… | ||
| 1.3.6.1.4.1.2636.3.67.1.1 | NodejnxPPPoEObjects | |||
| 1.3.6.1.4.1.2636.3.67.1.1.1 | NodejnxPPPoEIfLayer | |||
| 1.3.6.1.4.1.2636.3.67.1.1.1.1 | ScalarjnxPPPoENextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in jnxPPPoEIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry… |
| 1.3.6.1.4.1.2636.3.67.1.1.1.2 | TablejnxPPPoEIfTable | not-accessible | current | The parameters for the PPPoEservice on this interface. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.2.1 | RowjnxPPPoEIfEntry | not-accessible | current | The Parameters for a particular PPPoEinterface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable… |
| 1.3.6.1.4.1.2636.3.67.1.1.1.2.1.1 | ColumnjnxPPPoEIfIfIndex | not-accessible | current | The ifIndex value of the corresponding ifEntry. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.2.1.2 | ColumnjnxPPPoEIfMaxNumSessions | read-only | current | The number of sessions allowed on the PPPoEinterface, zero indicates unlimited. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.2.1.3 | ColumnjnxPPPoEIfRowStatus | read-only | current | Controls creation/deletion of entries in this table with READ-CREATE maximum access, according to the RowStatus textual convention, constrained to support the … |
| 1.3.6.1.4.1.2636.3.67.1.1.1.2.1.4 | ColumnjnxPPPoEIfLowerIfIndex | read-only | current | The ifIndex of an interface over which this PPPoEinterface is to be layered. A value of zero indicates no layering. An implementation may choose to require tha… |
| 1.3.6.1.4.1.2636.3.67.1.1.1.2.1.5 | ColumnjnxPPPoEIfAcName | read-only | current | The name to use for the AC-NAME tag that is sent in any PADO that is sent on this interface. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.2.1.6 | ColumnjnxPPPoEIfDupProtect | read-only | current | Flag to allow duplicate MAC addresses. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.2.1.7 | ColumnjnxPPPoEIfPADIFlag | read-only | current | This flag controls whether we always respond to a PADI with a PADO regardless of the ability to create the session and allows the session establish phase to re… |
| 1.3.6.1.4.1.2636.3.67.1.1.1.2.1.8 | ColumnjnxPPPoEIfAutoconfig | read-only | current | This flags determines whether the upper PPPoEinterface is created dynamically or statically. When enable(1) the interface is created dynamically. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.2.1.9 | ColumnjnxPPPoEIfServiceNameTable | read-only | current | Associate a PPPoEService Name Table with this interface for PADI processing. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.2.1.10 | ColumnjnxPPPoEIfPadrRemoteCircuitIdCapture | read-only | current | This flags determines whether the remote circuit id string will be captured and subsequently used as the NAS-PORT-ID radius attribute when it arrives as a tag … |
| 1.3.6.1.4.1.2636.3.67.1.1.1.2.1.11 | ColumnjnxPPPoEIfMtu | read-only | current | The initial Maximum Transmit Unit (MTU) that the PPPoEmajor interface entity will advertise to the remote entity. If the value of this variable is 1 then the l… |
| 1.3.6.1.4.1.2636.3.67.1.1.1.2.1.12 | ColumnjnxPPPoEIfLockoutMin | read-only | current | The lower bound, in seconds, of the time range used to specify the duration of the lockout of the client from recognition for the specified interface. This onl… |
| 1.3.6.1.4.1.2636.3.67.1.1.1.2.1.13 | ColumnjnxPPPoEIfLockoutMax | read-only | current | The upper bound, in seconds, of the time range used to specify the duration of the lockout of the client from recognition for the specified interface. This onl… |
| 1.3.6.1.4.1.2636.3.67.1.1.1.2.1.14 | ColumnjnxPPPoEIfDynamicProfile | read-only | current | Attach dynamic-profile to this interface |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3 | TablejnxPPPoEIfStatsTable | not-accessible | current | The statistics for the PPP over Ethernet Interface for the PPPoE service on this interface. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3.1 | RowjnxPPPoEIfStatsEntry | not-accessible | current | The statistics for a particular PPPoEInterface. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3.1.1 | ColumnjnxPPPoEIfStatsRxPADI | read-only | current | Number of PADI packets received. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3.1.2 | ColumnjnxPPPoEIfStatsTxPADO | read-only | current | Number of PADO packets transmitted. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3.1.3 | ColumnjnxPPPoEIfStatsRxPADR | read-only | current | Number of PADR packets received. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3.1.4 | ColumnjnxPPPoEIfStatsTxPADS | read-only | current | Number of PADS packets transmitted. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3.1.5 | ColumnjnxPPPoEIfStatsRxPADT | read-only | current | Number of PADT packets received. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3.1.6 | ColumnjnxPPPoEIfStatsTxPADT | read-only | current | Number of PADT packets transmitted. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3.1.7 | ColumnjnxPPPoEIfStatsRxInvVersion | read-only | current | Number of packets received with invalid version. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3.1.8 | ColumnjnxPPPoEIfStatsRxInvCode | read-only | current | Number of packets received with invalid code. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3.1.9 | ColumnjnxPPPoEIfStatsRxInvTags | read-only | current | Number of packets received with invalid tags. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3.1.10 | ColumnjnxPPPoEIfStatsRxInvSession | read-only | obsolete | Number of packets received with invalid session identifiers. This object became obsolete when separate counters were added for PADI and PADR packets. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3.1.11 | ColumnjnxPPPoEIfStatsRxInvTypes | read-only | current | Number of packets received with invalid types. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3.1.12 | ColumnjnxPPPoEIfStatsRxInvPackets | read-only | current | Number of invalid packets received. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3.1.13 | ColumnjnxPPPoEIfStatsRxInsufficientResources | read-only | current | Number of session requests that could not be honored due to invalid resources. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3.1.14 | ColumnjnxPPPoEIfStatsTxPADM | read-only | current | Number of PADM packets transmitted. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3.1.15 | ColumnjnxPPPoEIfStatsTxPADN | read-only | current | Number of PADN packets transmitted. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3.1.16 | ColumnjnxPPPoEIfStatsRxInvTagLength | read-only | current | Number of packets received with invalid tag length. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3.1.17 | ColumnjnxPPPoEIfStatsRxInvLength | read-only | current | Number of packets received with invalid length. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3.1.18 | ColumnjnxPPPoEIfStatsRxInvPadISession | read-only | current | Number of PADI packets received with invalid session identifiers. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.3.1.19 | ColumnjnxPPPoEIfStatsRxInvPadRSession | read-only | current | Number of PADR packets received with invalid session identifiers. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.4 | TablejnxPPPoEIfLockoutTable | not-accessible | current | The lockout configuration and state of a PPPoEclient on this interface. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.4.1 | RowjnxPPPoEIfLockoutEntry | not-accessible | current | Each entry contains the configuration and state of a particular PPPoEinterface client lockout. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.4.1.1 | ColumnjnxPPPoEIfLockoutClientAddress | not-accessible | current | The source MAC address if the client. |
| 1.3.6.1.4.1.2636.3.67.1.1.1.4.1.2 | ColumnjnxPPPoEIfLockoutTime | read-only | current | The time duration, in seconds, currently used to lockout the specified encapsulation type from recognition for the specified interface. The reported value is w… |
| 1.3.6.1.4.1.2636.3.67.1.1.1.4.1.3 | ColumnjnxPPPoEIfLockoutElapsedTime | read-only | current | The elapsed time, in seconds, that the specified encapsulation type has been locked-out from recognition for the specified interface. Its value will not exceed… |
| 1.3.6.1.4.1.2636.3.67.1.1.1.4.1.4 | ColumnjnxPPPoEIfLockoutNextTime | read-only | current | The time duration, in seconds, that will be used to lockout the specified encapsulation type from recognition for the specified interface for the next event th… |
| 1.3.6.1.4.1.2636.3.67.1.1.2 | NodejnxPPPoESubIfLayer | |||
| 1.3.6.1.4.1.2636.3.67.1.1.2.1 | ScalarjnxPPPoESubIfNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in jnxPPPoESubIfTable. A GET of this object returns the next available ifIndex value to be used to create an en… |
| 1.3.6.1.4.1.2636.3.67.1.1.2.2 | TablejnxPPPoESubIfTable | not-accessible | current | This table contains entries for PPPoESubinterfaces present in the system. |
| 1.3.6.1.4.1.2636.3.67.1.1.2.2.1 | RowjnxPPPoESubIfEntry | not-accessible | current | Each entry describes the characteristics of a PPPoESubinterface. With READ-CREATE maximum access ,creating/deleting entries in this table causes corresponding … |
| 1.3.6.1.4.1.2636.3.67.1.1.2.2.1.1 | ColumnjnxPPPoESubIfIndex | not-accessible | current | The ifIndex of the PPPoESubinterface. When creating entries in this table, suitable values for this object are determined by reading jnxPPPoESubNextIfIndex. |
| 1.3.6.1.4.1.2636.3.67.1.1.2.2.1.2 | ColumnjnxPPPoESubIfRowStatus | read-only | current | Controls creation/deletion of entries in this table with READ-CREATE maximum access ,according to the RowStatus textual convention, constrained to support the … |
| 1.3.6.1.4.1.2636.3.67.1.1.2.2.1.3 | ColumnjnxPPPoESubIfLowerIfIndex | read-only | current | The ifIndex of a PPPoEinterface over which this PPPoESubinterface is to be layered. A value of zero indicates no layering. An implementation may choose to requ… |
| 1.3.6.1.4.1.2636.3.67.1.1.2.2.1.4 | ColumnjnxPPPoESubIfId | read-only | current | An integer identifier for the PPPoEsubinterface, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. Th… |
| 1.3.6.1.4.1.2636.3.67.1.1.2.2.1.5 | ColumnjnxPPPoESubIfSessionId | read-only | current | The current sessionId associated with this sub-interface. |
| 1.3.6.1.4.1.2636.3.67.1.1.2.2.1.6 | ColumnjnxPPPoESubIfMotm | read-only | current | A message to send via a PADM on the sub-interface when the sub-interface transitions to the ifOperStatusUp state. The client may choose to display this message… |
| 1.3.6.1.4.1.2636.3.67.1.1.2.2.1.7 | ColumnjnxPPPoESubIfUrl | read-only | current | A URL to be sent via a PADM on the sub-interface when the sub-interface transitions to the ifOperStatusUp state. The client may use this URL as the initial web… |
| 1.3.6.1.4.1.2636.3.67.1.1.2.3 | TablejnxPppoeSubIfQueueStatsTable | not-accessible | current | Table containing the Queue parameters for the PPPoEsessions. |
| 1.3.6.1.4.1.2636.3.67.1.1.2.3.1 | RowjnxPppoeSubIfPerQueueStatsEntry | not-accessible | current | The statistics for a particular trrafic class queue for PPPoEsub Interface(i.e. session). ). Forwarding class to queue number mapping is not always one-to-one.… |
| 1.3.6.1.4.1.2636.3.67.1.1.2.3.1.1 | ColumnjnxPppoeSubIfQueueIndex | not-accessible | current | This attribute returns the queue index ranging from 0 to 7 of the queue configure on the PPPoEsubinterface to support the traffic class for PPPoEsession config… |
| 1.3.6.1.4.1.2636.3.67.1.1.2.3.1.2 | ColumnjnxPppoeSubIfQueueStatsPacketSent | read-only | current | This attribute returns the counts of number of packet sent per PPPoEsession and per queue. |
| 1.3.6.1.4.1.2636.3.67.1.1.2.3.1.3 | ColumnjnxPppoeSubIfQueueStatsBytesSent | read-only | current | This attribute returns the counts of number of bytes sent per PPPoEsession and per queue. |
| 1.3.6.1.4.1.2636.3.67.1.1.2.3.1.4 | ColumnjnxPppoeSubIfQueueStatsPacketDropped | read-only | current | This attribute returns the number of packet dropped per PPPoEsession and per queue. |
| 1.3.6.1.4.1.2636.3.67.1.1.2.3.1.5 | ColumnjnxPppoeSubIfQueueStatsBytesDropped | read-only | current | This attribute returns the number of bytes dropped per PPPoEsession and per queue. |
| 1.3.6.1.4.1.2636.3.67.1.1.2.3.1.6 | ColumnjnxPppoeSubIfQueueStatsActualBitRate | read-only | current | This attribute returns the actual bit rate for per PPPoEsession and per queue. |
| 1.3.6.1.4.1.2636.3.67.1.1.2.3.1.7 | ColumnjnxPppoeSubIfQueueStatsActualDroppedBitRate | read-only | current | This attribute returns the actual dropped bit rate for per PPPoEsession and per queue. |
| 1.3.6.1.4.1.2636.3.67.1.1.3 | NodejnxPPPoESummary | |||
| 1.3.6.1.4.1.2636.3.67.1.1.3.1 | ScalarjnxPPPoEMajorInterfaceCount | read-only | current | The total number of PPPoEmajor interfaces configured and created in the system. |
| 1.3.6.1.4.1.2636.3.67.1.1.3.2 | ScalarjnxPPPoESummaryMajorIfAdminUp | read-only | current | The total number of PPPoEmajor interfaces in the system that are administratively configured to up(1). |
| 1.3.6.1.4.1.2636.3.67.1.1.3.3 | ScalarjnxPPPoESummaryMajorIfAdminDown | read-only | current | The total number of PPPoEmajor interfaces in the system that are administrateively configued to down(2). |
| 1.3.6.1.4.1.2636.3.67.1.1.3.4 | ScalarjnxPPPoESummaryMajorIfOperUp | read-only | current | The total number of PPPoEmajor interfaces in the system with an operational state of up(1). |
| 1.3.6.1.4.1.2636.3.67.1.1.3.5 | ScalarjnxPPPoESummaryMajorIfOperDown | read-only | current | The total number of PPPoEmajor interfaces in the system with an operational state of down(2). |
| 1.3.6.1.4.1.2636.3.67.1.1.3.6 | ScalarjnxPPPoESummaryMajorIfLowerLayerDown | read-only | current | The total number of PPPoEmajor interfaces in the system with an operational state of lowerLayerDown(7). |
| 1.3.6.1.4.1.2636.3.67.1.1.3.7 | ScalarjnxPPPoESummaryMajorIfNotPresent | read-only | current | The total number of PPPoEmajor interfaces in the system with an operational state of notPresent(6). |
| 1.3.6.1.4.1.2636.3.67.1.1.3.8 | ScalarjnxPPPoESummarySubInterfaceCount | read-only | current | The total number of PPPoEsubinterfaces configured in the system. |
| 1.3.6.1.4.1.2636.3.67.1.1.3.9 | ScalarjnxPPPoESummarySubIfAdminUp | read-only | current | The total number of PPPoEsubinterfaces in the system that are administratively configured to up(1). |
| 1.3.6.1.4.1.2636.3.67.1.1.3.10 | ScalarjnxPPPoESummarySubIfAdminDown | read-only | current | The total number of PPPoEsubinterfaces in the system that are administrateively configued to down(2). |
| 1.3.6.1.4.1.2636.3.67.1.1.3.11 | ScalarjnxPPPoESummarySubIfOperUp | read-only | current | The total number of PPPoEsubinterfaces in the system with an operational state of up(1). |
| 1.3.6.1.4.1.2636.3.67.1.1.3.12 | ScalarjnxPPPoESummarySubIfOperDown | read-only | current | The total number of PPPoEsubinterfaces in the system with an operational state of down(2). |
| 1.3.6.1.4.1.2636.3.67.1.1.3.13 | ScalarjnxPPPoESummarySubIfLowerLayerDown | read-only | current | The total number of PPPoEsubinterfaces in the system with an operational state of lowerLayerDown(7). |
| 1.3.6.1.4.1.2636.3.67.1.1.3.14 | ScalarjnxPPPoESummarySubIfNotPresent | read-only | current | The total number of PPPoEsubinterfaces in the system with an operational state of notPresent(6). |
| 1.3.6.1.4.1.2636.3.67.1.1.4 | NodejnxPPPoEServices | |||
| 1.3.6.1.4.1.2636.3.67.1.1.4.1 | TablejnxPPPoEServiceNameTableTable | not-accessible | current | This table contains entries for the PPPoEService-name tables. |
| 1.3.6.1.4.1.2636.3.67.1.1.4.1.1 | RowjnxPPPoEServiceNameTableEntry | not-accessible | current | The parameters for the PPPoEservice-name table. |
| 1.3.6.1.4.1.2636.3.67.1.1.4.1.1.1 | ColumnjnxPPPoEServiceNameTableName | not-accessible | current | Service-name table name. |
| 1.3.6.1.4.1.2636.3.67.1.1.4.1.1.2 | ColumnjnxPPPoEServiceNameTableRowStatus | read-only | current | Controls creation/deletion of entries in this table with READ-CREATE maximum access,according to the RowStatus textual convention, constrained to support the f… |
| 1.3.6.1.4.1.2636.3.67.1.1.4.2 | TablejnxPPPoEServiceNameTable | not-accessible | current | This table contains entries for the PPPoEService-names. |
| 1.3.6.1.4.1.2636.3.67.1.1.4.2.1 | RowjnxPPPoEServiceNameEntry | not-accessible | current | The parameters for the PPPoEservice-name table entry. |
| 1.3.6.1.4.1.2636.3.67.1.1.4.2.1.1 | ColumnjnxPPPoEServiceName | not-accessible | current | Service-name tag value. |
| 1.3.6.1.4.1.2636.3.67.1.1.4.2.1.2 | ColumnjnxPPPoEServiceNameAction | read-only | current | Identifies the behavior when the the Service-name tag is received in a PADI frame. |
| 1.3.6.1.4.1.2636.3.67.1.1.4.2.1.3 | ColumnjnxPPPoEServiceNameDynamicProfile | read-only | current | Dynamic Profile associated with a Service-name. |
| 1.3.6.1.4.1.2636.3.67.1.1.4.2.1.4 | ColumnjnxPPPoEServiceNameRoutingInstance | read-only | current | Routing Instance associated with a Service-name. |
| 1.3.6.1.4.1.2636.3.67.1.1.4.2.1.5 | ColumnjnxPPPoEServiceNameMaxSessions | read-only | current | The Max Sessions value used to cap the number of active PPPoEssessions that may be established with the specified Service entry. |
| 1.3.6.1.4.1.2636.3.67.1.1.4.2.1.6 | ColumnjnxPPPoEServiceNameRowStatus | read-only | current | Controls creation/deletion of entries in this table with READ-CREATE maximum access ,according to the RowStatus textual convention, constrained to support the … |
| 1.3.6.1.4.1.2636.3.67.1.1.4.3 | TablejnxPPPoEServiceNameAciAriTable | not-accessible | current | This table contains entries for the PPPoEServicename AciAri entries. |
| 1.3.6.1.4.1.2636.3.67.1.1.4.3.1 | RowjnxPPPoEServiceNameAciAriEntry | not-accessible | current | The parameters for the PPPoEservice-name AciAri table entry. |
| 1.3.6.1.4.1.2636.3.67.1.1.4.3.1.1 | ColumnjnxPPPoEServiceNameAgentCircuitId | not-accessible | current | ACI tag values that the PPPoEclient would send in the PADI/PADR control packet. |
| 1.3.6.1.4.1.2636.3.67.1.1.4.3.1.2 | ColumnjnxPPPoEServiceNameAgentRemoteId | not-accessible | current | ACI tag values that the PPPoEclient would send in the PADI/PADR control packet. |
| 1.3.6.1.4.1.2636.3.67.1.1.4.3.1.3 | ColumnjnxPPPoEServiceNameAciAriAction | read-only | current | Identifies the behavior when the the Service-name with ACI/ARI pairs is received in a PADI frame. |
| 1.3.6.1.4.1.2636.3.67.1.1.4.3.1.4 | ColumnjnxPPPoEServiceNameAciAriDynamicProfile | read-only | current | Dynamic Profile associated with a Service-name and ACI/ARI pairs |
| 1.3.6.1.4.1.2636.3.67.1.1.4.3.1.5 | ColumnjnxPPPoEServiceNameAciAriRoutingInstance | read-only | current | Routing-Instance associated with a Service-name and ACI/ARI pairs |
| 1.3.6.1.4.1.2636.3.67.1.1.4.3.1.6 | ColumnjnxPPPoEServiceNameAciAriStaticInterface | read-only | current | Static Interface associated with each ACI/ARI Entry. |
| 1.3.6.1.4.1.2636.3.67.1.1.4.3.1.7 | ColumnjnxPPPoEServiceNameAciAriRowStatus | read-only | current | Controls creation/deletion of entries in this table with READ-CREATE maximum access, according to the RowStatus textual convention, constrained to support the … |
| 1.3.6.1.4.1.2636.3.67.1.4 | NodejnxPPPoEConformance | |||
| 1.3.6.1.4.1.2636.3.67.1.4.1 | NodejnxPPPoECompliances | |||
| 1.3.6.1.4.1.2636.3.67.1.4.2 | NodejnxPPPoEGroups |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| JnxPPPoEServiceNameAction | INTEGER { drop(0), terminate(1) } | current | The set of Service-name action types. drop no PADO packet will be sent. terminate a PADO packet will be sent. |