JUNIPER-ANALYZER-MIB
22 objects
This is Juniper Networks' implementation of enterprise specific MIB for Analyzer and Remote Analyzer. Port mirroring is widely used in enterprise switches to send a copy of all or sampled packets seen on a port to an anlyzer on the same or different switch.
Imported Objects
| JUNIPER-EX-SMI | jnxExAnalyzer |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.40.1.1.1 | IdentityjnxAnalyzerMIB | This is Juniper Networks' implementation of enterprise specific MIB for Analyzer and Remote Analyzer. Port mirroring is widely used in enterprise switches to s… | ||
| 1.3.6.1.4.1.2636.3.40.1.1.1.1 | NodejnxAnalyzerMIBObjects | |||
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.1 | TablejnxAnalyzerTable | not-accessible | current | Network traffic passing through ports is analyzed by sending a copy of the traffic to another port on the same or different switch. This table contains the ana… |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.1.1 | RowjnxAnalyzerEntry | not-accessible | current | A row instance contains the Analyzer Name, Analyzer Status, Mirroring Ratio, Loss Priority. |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.1.1.1 | ColumnjnxAnalyzerName | not-accessible | current | This object identifies a unique Analyzer configured on the switch. |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.1.1.2 | ColumnjnxAnalyzerStatus | read-only | obsolete | This object identifies whether the mirroring associated with a particular analyzer is enabled or disabled. |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.1.1.3 | ColumnjnxMirroringRatio | read-only | current | This object will specify the mirroring ratio. User can configure the analyzer to mirror only one out of X packets [1:X packets] in the ingress/egress side base… |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.1.1.4 | ColumnjnxLossPriority | read-only | current | The analyzer port may be congested when the number of packets exceeds the bandwidth of the analyzer port. So the loss-priority parameter is enabled. The switch… |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.2 | TablejnxAnalyzerInputTable | not-accessible | obsolete | An analyzer Session is an association of several source ports to a destination port.A range or series of ports can be mirrored in a session. |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.2.1 | RowjnxAnalyzerInputEntry | not-accessible | obsolete | An Entry is created for each Input Source port. |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.2.1.1 | ColumnjnxAnalyzerInputValue | not-accessible | obsolete | This identifies each different analyzer input source. If the value of jnxAnalyzerInputType is 1 then jnxAnalyzerInputValue refers to the input source Interface… |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.2.1.2 | ColumnjnxAnalyzerInputOption | read-only | obsolete | A source port is a switch port that is been mirrored. It can be mirrored based either on Ingress(received) traffic or egress (transmitted) traffic. The goal of… |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.2.1.3 | ColumnjnxAnalyzerInputType | read-only | obsolete | This specifies whether interfaces or VLANs is mirrored. Mirroring can be done on the basis of the interface name.All packets received on a port configured for … |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.3 | TablejnxAnalyzerOutputTable | not-accessible | current | This table describes the destination port to which the traffic from the source ports are copied. |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.3.1 | RowjnxAnalyzerOutputEntry | not-accessible | current | An Entry is created for each destination port or destination vlan. |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.3.1.1 | ColumnjnxAnalyzerOutputValue | not-accessible | current | This object identifies each different destination port or destination vlan. If the value of jnxAnalyzerOutputType is 1 then jnxAnalyzerOutputValue gives the de… |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.3.1.2 | ColumnjnxAnalyzerOutputType | read-only | current | The destination port can be on the same switch or on a different switch(Remote Analyzer). Value 1 specifies that the destination interface is on the same switc… |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.4 | TablejnxExAnalyzerInputTable | not-accessible | current | An analyzer Session is an association of several source ports to a destination port.A range or series of ports can be mirrored in a session. |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.4.1 | RowjnxExAnalyzerInputEntry | not-accessible | current | An Entry is created for each Input Source port. |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.4.1.1 | ColumnjnxExAnalyzerInputOption | not-accessible | current | A source port is a switch port that is been mirrored. It can be mirrored based either on Ingress(received) traffic or egress (transmitted) traffic. The goal of… |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.4.1.2 | ColumnjnxExAnalyzerInputValue | not-accessible | current | This identifies each different analyzer input source. If the value of jnxExAnalyzerInputType is 1 then jnxExAnalyzerInputValue refers to the input source Inter… |
| 1.3.6.1.4.1.2636.3.40.1.1.1.1.4.1.3 | ColumnjnxExAnalyzerInputType | read-only | current | This specifies whether interfaces or VLANs is mirrored. Mirroring can be done on the basis of the interface name.All packets received on a port configured for … |