JUNIPER-ATM-COS-MIB
46 objects
The Juniper enterprise MIB for ATM COS (Class Of Service) infrastructure. For detailed information on ATM COS, Junos Documentation is recommended as the reference. Abbreviations: COS - Class Of Service RED - Random Early Detection PLP - Packet Loss Priority
Imported Objects
| ATM-MIB | atmVclVci atmVclVpi |
| IF-MIB | ifIndex |
| JUNIPER-COS-MIB | jnxCosFcId |
| JUNIPER-SMI | jnxMibs |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.21 | IdentityjnxAtmCos | The Juniper enterprise MIB for ATM COS (Class Of Service) infrastructure. For detailed information on ATM COS, Junos Documentation is recommended as the refere… | ||
| 1.3.6.1.4.1.2636.3.21.1 | TablejnxCosAtmVcTable | not-accessible | current | A table of ATM VCs which have COS configured. |
| 1.3.6.1.4.1.2636.3.21.1.1 | RowjnxCosAtmVcEntry | not-accessible | current | This entry contains COS info specific to an ATM VC. Each entry is indexed using ifIndex, vpi and vci of the VC. |
| 1.3.6.1.4.1.2636.3.21.1.1.1 | ColumnjnxCosAtmVcCosMode | read-only | current | The mode of COS queue priority for the VC. strict mode : One queue of the four queues has strict high priority and is always serviced before the rest of the qu… |
| 1.3.6.1.4.1.2636.3.21.2 | TablejnxCosAtmVcScTable | not-accessible | current | A table of rows representing atm-scheduler config parameters for each forwarding class within a specified VC. NOTE: These schedulers are specific to an atm int… |
| 1.3.6.1.4.1.2636.3.21.2.1 | RowjnxCosAtmVcScEntry | not-accessible | current | This entry represents atm-scheduler config parameters per forwarding class and per VC. |
| 1.3.6.1.4.1.2636.3.21.2.1.1 | ColumnjnxCosAtmVcScPriority | read-only | current | The atm-scheduler priority for the queue associated with the specified forwarding class within the specified VC. |
| 1.3.6.1.4.1.2636.3.21.2.1.2 | ColumnjnxCosAtmVcScTxWeightType | read-only | current | The atm-scheduler transmit-weight-type for the queue associated with the specified forwarding class inside the specified VC. An atm-scheduler can specify the t… |
| 1.3.6.1.4.1.2636.3.21.2.1.3 | ColumnjnxCosAtmVcScTxWeight | read-only | current | The atm-scheduler's transmit weight for the queue associated with the specified forwarding class and the specified VC. This object value is either expressed in… |
| 1.3.6.1.4.1.2636.3.21.2.1.4 | ColumnjnxCosAtmVcScDpType | read-only | current | The type of RED drop profile configured for the specified forwarding class within the specified VC. A scheduler can specify either linear or constant drop prof… |
| 1.3.6.1.4.1.2636.3.21.2.1.5 | ColumnjnxCosAtmVcScLrdpQueueDepth | read-only | current | The maximum queue size in cells, as specified by the linear RED drop profile associated with the specified forwarding class within the specified VC. This objec… |
| 1.3.6.1.4.1.2636.3.21.2.1.6 | ColumnjnxCosAtmVcScLrdpLowPlpThresh | read-only | current | The threshold percentage of fill-level beyond which low PLP (Packet Loss Priority) packets belonging to the specified forwarding class within the specified VC … |
| 1.3.6.1.4.1.2636.3.21.2.1.7 | ColumnjnxCosAtmVcScLrdpHighPlpThresh | read-only | current | The threshold percentage of fill-level beyond which high PLP (Packet Loss Priority) packets belonging to the specified forwarding class within the specified VC… |
| 1.3.6.1.4.1.2636.3.21.2.1.8 | ColumnjnxCosAtmVcEpdThreshold | read-only | current | If a EPD type drop profile is configured for this scheduler and if the number of cells queued exceeds this threshold value, all the cells in the queue are drop… |
| 1.3.6.1.4.1.2636.3.21.3 | TablejnxCosAtmVcQstatsTable | not-accessible | current | A table of per VC and per forwarding class queue stats entries. |
| 1.3.6.1.4.1.2636.3.21.3.1 | RowjnxCosAtmVcQstatsEntry | not-accessible | current | This entry contains queue stats for a specified forwarding class and specified VC. |
| 1.3.6.1.4.1.2636.3.21.3.1.1 | ColumnjnxCosAtmVcQstatsOutPackets | read-only | current | The number of packets belonging to the specified forwarding class transmitted on the specified VC. |
| 1.3.6.1.4.1.2636.3.21.3.1.2 | ColumnjnxCosAtmVcQstatsOutBytes | read-only | current | The number of bytes belonging to the specified forwarding class that were transmitted on the specified VC. |
| 1.3.6.1.4.1.2636.3.21.3.1.3 | ColumnjnxCosAtmVcQstatsOutRedDropPkts | read-only | current | The number of outgoing packets on the specified VC and belonging to the specified forwarding class, that were RED-dropped. |
| 1.3.6.1.4.1.2636.3.21.3.1.4 | ColumnjnxCosAtmVcQstatsOutNonRedDrops | read-only | current | The number of outgoing packets on the specified VC and belonging to the specified forwarding class, that were dropped not as a result of RED mechanism, but bec… |
| 1.3.6.1.4.1.2636.3.21.3.1.5 | ColumnjnxCosAtmVcQstatsOutLpBytes | read-only | current | The number of low PLP (PLP0) bytes transmitted. |
| 1.3.6.1.4.1.2636.3.21.3.1.6 | ColumnjnxCosAtmVcQstatsOutLpPkts | read-only | current | The number of low PLP (PLP0) packets transmitted. |
| 1.3.6.1.4.1.2636.3.21.3.1.7 | ColumnjnxCosAtmVcQstatsOutLpDropBytes | read-only | current | The number of low PLP (PLP0) bytes dropped at the output queue. |
| 1.3.6.1.4.1.2636.3.21.3.1.8 | ColumnjnxCosAtmVcQstatsOutHpDropBytes | read-only | current | The number of high PLP (PLP1) bytes dropped at the output queue. |
| 1.3.6.1.4.1.2636.3.21.3.1.9 | ColumnjnxCosAtmVcQstatsOutLpDropPkts | read-only | current | The number of low PLP (PLP0) packets dropped at the output queue. |
| 1.3.6.1.4.1.2636.3.21.3.1.10 | ColumnjnxCosAtmVcQstatsOutHpDropPkts | read-only | current | The number of high PLP (PLP1) packets dropped at the output queue. |
| 1.3.6.1.4.1.2636.3.21.4 | TablejnxCosAtmTrunkTable | not-accessible | current | A table of all ATM Trunk CoS entries. Stats and configuration information is provided for each ATM Trunk CoS interface. |
| 1.3.6.1.4.1.2636.3.21.4.1 | RowjnxCosAtmTrunkEntry | not-accessible | current | A single ATM Trunk CoS Entry. |
| 1.3.6.1.4.1.2636.3.21.4.1.1 | ColumnjnxCosAtmTrunkMode | read-only | current | The mode of COS queue priority for the Trunk. strict mode : One queue of the four queues has strict high priority and is always serviced before the rest of the… |
| 1.3.6.1.4.1.2636.3.21.4.1.2 | ColumnjnxCosAtmTrunkScPriority | read-only | current | The atm-scheduler priority for the queue associated with the specified forwarding class within the specified Trunk. |
| 1.3.6.1.4.1.2636.3.21.4.1.3 | ColumnjnxCosAtmTrunkScTxWeightType | read-only | current | The atm-scheduler transmit-weight-type for the queue associated with the specified forwarding class inside the specified Trunk. An atm-scheduler can specify th… |
| 1.3.6.1.4.1.2636.3.21.4.1.4 | ColumnjnxCosAtmTrunkScTxWeight | read-only | current | The atm-scheduler's transmit weight for the queue associated with the specified forwarding class and the specified Trunk. This object value is either expressed… |
| 1.3.6.1.4.1.2636.3.21.4.1.5 | ColumnjnxCosAtmTrunkQaType | read-only | current | The atm queue admission type used for the specified Trunk. |
| 1.3.6.1.4.1.2636.3.21.4.1.6 | ColumnjnxCosAtmTrunkEpdThresholdPlp0 | read-only | current | If an EPD type drop profile is configured for this scheduler and if the number of cells queued exceeds this threshold value, all the cells which have plp equal… |
| 1.3.6.1.4.1.2636.3.21.4.1.7 | ColumnjnxCosAtmTrunkEpdThresholdPlp1 | read-only | current | If a EPD type drop profile is configured for this scheduler and if the number of cells queued exceeds this threshold value, all the cells which have plp equal … |
| 1.3.6.1.4.1.2636.3.21.4.1.8 | ColumnjnxCosAtmTrunkQstatsOutPackets | read-only | current | The number of packets belonging to the specified forwarding class transmitted on the specified Trunk. |
| 1.3.6.1.4.1.2636.3.21.4.1.9 | ColumnjnxCosAtmTrunkQstatsOutBytes | read-only | current | The number of bytes belonging to the specified forwarding class that were transmitted on the specified Trunk. |
| 1.3.6.1.4.1.2636.3.21.4.1.10 | ColumnjnxCosAtmTrunkQstatsOutDrops | read-only | current | The number of outgoing packets on the specified Trunk and belonging to the specified forwarding class, that were dropped. |
| 1.3.6.1.4.1.2636.3.21.4.1.11 | ColumnjnxCosAtmTrunkQstatsOutLpBytes | read-only | current | The number of low PLP (PLP0) bytes transmitted. |
| 1.3.6.1.4.1.2636.3.21.4.1.12 | ColumnjnxCosAtmTrunkQstatsOutLpPkts | read-only | current | The number of low PLP (PLP0) packets transmitted. |
| 1.3.6.1.4.1.2636.3.21.4.1.13 | ColumnjnxCosAtmTrunkQstatsOutLpDropBytes | read-only | current | The number of low PLP (PLP0) bytes dropped at the output queue. |
| 1.3.6.1.4.1.2636.3.21.4.1.14 | ColumnjnxCosAtmTrunkQstatsOutHpDropBytes | read-only | current | The number of high PLP (PLP1) bytes dropped at the output queue. |
| 1.3.6.1.4.1.2636.3.21.4.1.15 | ColumnjnxCosAtmTrunkQstatsOutLpDropPkts | read-only | current | The number of low PLP (PLP0) packets dropped at the output queue. |
| 1.3.6.1.4.1.2636.3.21.4.1.16 | ColumnjnxCosAtmTrunkQstatsOutHpDropPkts | read-only | current | The number of high PLP (PLP1) packets dropped at the output queue. |
| 1.3.6.1.4.1.2636.3.21.4.1.17 | ColumnjnxCosAtmTrunkQstatsOutHpBytes | read-only | current | The number of high PLP (PLP1) bytes transmitted. |
| 1.3.6.1.4.1.2636.3.21.4.1.18 | ColumnjnxCosAtmTrunkQstatsOutHpPkts | read-only | current | The number of high PLP (PLP1) packets transmitted. |