MIB Viewer

JUNIPER-ATM-MIB

78 objects
The Juniper enterprise MIB for ATM interfaces and VCs
Imported Objects
ATM-MIBatmInterfaceConfEntry atmVclEntry atmVplEntry
IF-MIBifIndex
INET-ADDRESS-MIBInetAddressIPv4 InetAddressIPv6
JUNIPER-SMIjnxMibs
SNMPv2-SMICounter32 Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TCTEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.2636.3.10IdentityjnxAtmThe Juniper enterprise MIB for ATM interfaces and VCs
1.3.6.1.4.1.2636.3.10.1TablejnxAtmIfTablenot-accessiblecurrentThis table contains config and stats parameters, one entry per physical interface (ATM port).
1.3.6.1.4.1.2636.3.10.1.1RowjnxAtmIfEntrynot-accessiblecurrentThis entry contains additional ATM interface config and stats objects, not covered in standard mibs. Each entry is an extension of atmInterfaceConfEntry define…
1.3.6.1.4.1.2636.3.10.1.1.1ColumnjnxAtmIfPortTyperead-onlycurrentThe physical port type.
1.3.6.1.4.1.2636.3.10.1.1.2ColumnjnxAtmIfEncapsread-onlycurrentATM physical link layer encapsulation.
1.3.6.1.4.1.2636.3.10.1.1.3ColumnjnxAtmIfLpBackInforead-onlycurrentLoop back config and type.
1.3.6.1.4.1.2636.3.10.1.1.4ColumnjnxAtmIfScrambleEnableread-onlycurrentShows whether scrambling is enabled or disabled
1.3.6.1.4.1.2636.3.10.1.1.5ColumnjnxAtmIfTxCellCountread-onlycurrentThe number of ATM cells transmitted by the interface. Includes Idle cells transmitted.
1.3.6.1.4.1.2636.3.10.1.1.6ColumnjnxAtmIfRxCellCountread-onlycurrentThe number of ATM cells received by the interface. Excludes Idle cells received.
1.3.6.1.4.1.2636.3.10.1.1.7ColumnjnxAtmIfTxIdleCellCountread-onlycurrentThe number of idle cells sent by the port. When the ATM interface has nothing to send, it sends idle cells to fill the time slot.
1.3.6.1.4.1.2636.3.10.1.1.8ColumnjnxAtmIfUncorrHCSErrsread-onlycurrentThe number of uncorrectable cell Header Check Sequence (HCS) Errors that occurred.
1.3.6.1.4.1.2636.3.10.1.1.9ColumnjnxAtmIfCorrHCSErrsread-onlycurrentThe number of correctable cell Header Check Sequence (HCS) Errors that occurred.
1.3.6.1.4.1.2636.3.10.1.1.10ColumnjnxAtmIfTxCellFIFOOverRunsread-onlycurrentThe number of overruns in the Transmit FIFO.
1.3.6.1.4.1.2636.3.10.1.1.11ColumnjnxAtmIfRxCellFIFOOverRunsread-onlycurrentThe number of overruns in the Receive FIFO.
1.3.6.1.4.1.2636.3.10.1.1.12ColumnjnxAtmIfRxCellFIFOUnderRunsread-onlycurrentThe number of underruns in the receive FIFO.
1.3.6.1.4.1.2636.3.10.1.1.13ColumnjnxAtmIfInInvalidVCCellsread-onlycurrentThe number of Cells that arrived for non existent VC.
1.3.6.1.4.1.2636.3.10.1.1.14ColumnjnxAtmIfInNoBufferOAMCellsread-onlycurrentThe number of received OAM cells or raw cells dropped because no buffers were available to handle them.
1.3.6.1.4.1.2636.3.10.1.1.15ColumnjnxAtmIfInNoBufDropPktsread-onlycurrentThe number of AAL5 packets dropped because there was no enough buffer to handle them.
1.3.6.1.4.1.2636.3.10.1.1.16ColumnjnxAtmIfOutVCQueueDropsread-onlycurrentThe number of packets dropped because of queue limits on each VC.
1.3.6.1.4.1.2636.3.10.1.1.17ColumnjnxAtmIfInBadCrcsread-onlycurrentThe total number of incoming CRC errors.
1.3.6.1.4.1.2636.3.10.1.1.18ColumnjnxAtmIfInLenErrPktsread-onlycurrentThe number of AAL5 packets dropped because their length was incorrect.
1.3.6.1.4.1.2636.3.10.1.1.19ColumnjnxAtmIfInTimeoutPktsread-onlycurrentThe number of AAL5 packets dropped because of reassembly timeout.
1.3.6.1.4.1.2636.3.10.1.1.20ColumnjnxAtmIfL2CircuitModeread-onlycurrentThe layer 2 circuit mode of this Atm interface. Note, this applies only to interfaces on AtmII pics.
1.3.6.1.4.1.2636.3.10.2TablejnxAtmVCTablenot-accessiblecurrentA table of all p2p/p2mp/multicast VC entries.
1.3.6.1.4.1.2636.3.10.2.1RowjnxAtmVCEntrynot-accessiblecurrentSpecial Cases: - No traffic Stats for multicast VCs. (0 by default). - Multipoint Destination IP Address for a p2p vc is invalid (0.0.0.0 by default). - When t…
1.3.6.1.4.1.2636.3.10.2.1.1ColumnjnxAtmVCConnTyperead-onlycurrentThe type of connection. The type 'other' means vc type is unknown or is not one of the other types.
1.3.6.1.4.1.2636.3.10.2.1.2ColumnjnxAtmVCEncapsulationread-onlycurrentThe atm encapsulation type associated with the VC. atmCccCellRelay : ATM Cell Relay for CCC atmCccVcMux : ATM VC for CCC atmCiscoNlpid : Cisco-compatible ATM N…
1.3.6.1.4.1.2636.3.10.2.1.3ColumnjnxAtmVCMpDestIPv4Addrread-onlycurrentThis object is meaningful only if jnxAtmVCConnType value is 'p2mp' (point-to-multipoint). For a p2mp VC, it's the multipoint destination IPv4 address. When the…
1.3.6.1.4.1.2636.3.10.2.1.4ColumnjnxAtmVCMpDestIPv6Addrread-onlycurrentThis object is meaningful only if jnxAtmVCConnType value is 'p2mp' (point-to-multipoint). For a p2mp VC, it's the multipoint destination IPv6 address. When the…
1.3.6.1.4.1.2636.3.10.2.1.5ColumnjnxAtmVCFlagsread-onlycurrentFlags related to the VC.
1.3.6.1.4.1.2636.3.10.2.1.6ColumnjnxAtmVCTotalDownTimeread-onlycurrentThe total VC down time in seconds ever since the system rebooted.
1.3.6.1.4.1.2636.3.10.2.1.7ColumnjnxAtmVCInBytesread-onlycurrentThe number of bytes received on the VC.
1.3.6.1.4.1.2636.3.10.2.1.8ColumnjnxAtmVCOutBytesread-onlycurrentThe number of bytes sent out on the VC.
1.3.6.1.4.1.2636.3.10.2.1.9ColumnjnxAtmVCInPktsread-onlycurrentThe number of packets received on the VC.
1.3.6.1.4.1.2636.3.10.2.1.10ColumnjnxAtmVCOutPktsread-onlycurrentThe number of packets sent out on the VC.
1.3.6.1.4.1.2636.3.10.2.1.11ColumnjnxAtmVCTailQueuePktDropsread-onlycurrentThe number of packets dropped due to bandwidth constraints. Indicates that packets were queued to send out at a rate faster than allowed.
1.3.6.1.4.1.2636.3.10.2.1.12ColumnjnxAtmVCOAMPeriodread-onlycurrentThis time interval indicates how often the F5 cells are sent to know the status of the VC.
1.3.6.1.4.1.2636.3.10.2.1.13ColumnjnxAtmVCOAMUpCellCountread-onlycurrentThe minimum number of loopback cells to be received to declare that the VC is up.
1.3.6.1.4.1.2636.3.10.2.1.14ColumnjnxAtmVCOAMDownCellCountread-onlycurrentThe minimum number of loopback cells to be received to declare that the VC is down. This object would have zero value if OAM is not enabled. (indicated in jnxA…
1.3.6.1.4.1.2636.3.10.2.1.15ColumnjnxAtmVCInOAMF5LoopCellsread-onlycurrentThe number of OAM F5 loopback cells received. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled.
1.3.6.1.4.1.2636.3.10.2.1.16ColumnjnxAtmVCOutOAMF5LoopCellsread-onlycurrentThe number of OAM F5 loopback cells sent. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled.
1.3.6.1.4.1.2636.3.10.2.1.17ColumnjnxAtmVCInOAMF5RDICellsread-onlycurrentThe number of OAM F5 cells received, with RDI(Remote Defect Indication) bit set. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is no…
1.3.6.1.4.1.2636.3.10.2.1.18ColumnjnxAtmVCOutOAMF5RDICellsread-onlycurrentThe number of OAM F5 cells transmitted, with RDI(Remote Defect Indication) bit set. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is…
1.3.6.1.4.1.2636.3.10.2.1.19ColumnjnxAtmVCInOAMF5AISCellsread-onlycurrentThe number of OAM F5 cells received, with AIS(Alarm Indication Signal) bit set. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not…
1.3.6.1.4.1.2636.3.10.2.1.20ColumnjnxAtmVCOutOAMF5AISCellsread-onlycurrentThe number of OAM F5 cells transmitted, with AIS (Alarm Indication Signal) bit set. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is…
1.3.6.1.4.1.2636.3.10.3TablejnxAtmVpTablenot-accessiblecurrentThe table of ATM VPs. This table augments atmVplTable defined in standard ATM mib.
1.3.6.1.4.1.2636.3.10.3.1RowjnxAtmVpEntrynot-accessiblecurrentEach entry represents config, status and statistics info related to an ATM VP configured. This entry augments the atmVplEntry defined in standard ATM mib (RFC …
1.3.6.1.4.1.2636.3.10.3.1.1ColumnjnxAtmVpFlagsread-onlycurrentThe flags associated with this VP.
1.3.6.1.4.1.2636.3.10.3.1.2ColumnjnxAtmVpTotalDownTimeread-onlycurrentThe total VP downtime in seconds, ever since the system rebooted.
1.3.6.1.4.1.2636.3.10.3.1.3ColumnjnxAtmVpOamPeriodread-onlycurrentThis time interval indicates how often the OAM F4 cells are sent to determine the status of the VP. The value of this object is zero when OAM is not enabled on…
1.3.6.1.4.1.2636.3.10.3.1.4ColumnjnxAtmVpOamUpCellCountread-onlycurrentThe minimum number of consecutive loopback cells to be received to declare that the VP is up. The value of this object is zero when OAM is not enabled on the V…
1.3.6.1.4.1.2636.3.10.3.1.5ColumnjnxAtmVpOamDownCellCountread-onlycurrentThe minimum number of consecutive loopback cells to be received to declare that the VP is down. The value of this object is zero when OAM is not enabled on the…
1.3.6.1.4.1.2636.3.10.3.1.6ColumnjnxAtmVpInBytesread-onlycurrentThe number of bytes received on the VP.
1.3.6.1.4.1.2636.3.10.3.1.7ColumnjnxAtmVpOutBytesread-onlycurrentThe number of bytes sent out on the VP.
1.3.6.1.4.1.2636.3.10.3.1.8ColumnjnxAtmVpInPktsread-onlycurrentThe number of packets received on the VP.
1.3.6.1.4.1.2636.3.10.3.1.9ColumnjnxAtmVpOutPktsread-onlycurrentThe number of packets sent out on the VP.
1.3.6.1.4.1.2636.3.10.3.1.10ColumnjnxAtmVpInOamF4Cellsread-onlycurrentThe number of OAM F4 cells received on the VP.
1.3.6.1.4.1.2636.3.10.3.1.11ColumnjnxAtmVpOutOamF4Cellsread-onlycurrentThe number of OAM F4 cells transmitted on the VP.
1.3.6.1.4.1.2636.3.10.3.1.12ColumnjnxAtmVpInOamF4LoopCellsread-onlycurrentThe number of OAM F4 loopback cells received on the VP.
1.3.6.1.4.1.2636.3.10.3.1.13ColumnjnxAtmVpOutOamF4LoopCellsread-onlycurrentThe number of OAM F4 cells transmitted on the VP.
1.3.6.1.4.1.2636.3.10.3.1.14ColumnjnxAtmVpInOamF4RdiCellsread-onlycurrentThe number of OAM F4 RDI cells received on the VP.
1.3.6.1.4.1.2636.3.10.3.1.15ColumnjnxAtmVpOutOamF4RdiCellsread-onlycurrentThe number of OAM F4 RDI cells transmitted on the VP.
1.3.6.1.4.1.2636.3.10.3.1.16ColumnjnxAtmVpInOamF4AisCellsread-onlycurrentThe number of OAM F4 AIS cells received on the VP.
1.3.6.1.4.1.2636.3.10.4TablejnxAtmTrunkTablenot-accessiblecurrentA table of all ATM Trunk entries.
1.3.6.1.4.1.2636.3.10.4.1RowjnxAtmTrunkEntrynot-accessiblecurrentSpecial Cases: - When the encapsulation type for the logical interface (to which Trunk belongs) is 'atmCccCellRelay', only Generic Trunk Info is valid.
1.3.6.1.4.1.2636.3.10.4.1.1ColumnjnxAtmTrunkIdread-onlycurrentThe identifier for this ATM Trunk.
1.3.6.1.4.1.2636.3.10.4.1.2ColumnjnxAtmTrunkConnTyperead-onlycurrentThe type of connection. The type 'other' means trunk type is unknown or is not one of the other types.
1.3.6.1.4.1.2636.3.10.4.1.3ColumnjnxAtmTrunkEncapsulationread-onlycurrentThe atm encapsulation type associated with the VC or Trunk. atmCccCellRelay : ATM Cell Relay for CCC
1.3.6.1.4.1.2636.3.10.4.1.4ColumnjnxAtmTrunkFlagsread-onlycurrentFlags related to the Trunk.
1.3.6.1.4.1.2636.3.10.4.1.5ColumnjnxAtmTrunkTotalDownTimeread-onlycurrentThe total Trunk down time in seconds ever since the system rebooted.
1.3.6.1.4.1.2636.3.10.4.1.6ColumnjnxAtmTrunkInBytesread-onlycurrentThe number of bytes received on the Trunk.
1.3.6.1.4.1.2636.3.10.4.1.7ColumnjnxAtmTrunkOutBytesread-onlycurrentThe number of bytes sent out on the Trunk.
1.3.6.1.4.1.2636.3.10.4.1.8ColumnjnxAtmTrunkInPktsread-onlycurrentThe number of packets received on the Trunk.
1.3.6.1.4.1.2636.3.10.4.1.9ColumnjnxAtmTrunkOutPktsread-onlycurrentThe number of packets sent out on the Trunk.
1.3.6.1.4.1.2636.3.10.4.1.10ColumnjnxAtmTrunkTailQueuePktDropsread-onlycurrentThe number of packets dropped due to bandwidth constraints. Indicates that packets were queued to send out at a rate faster than allowed.
1.3.6.1.4.1.2636.3.10.4.1.15ColumnjnxAtmTrunkInOAMF4AISCellsread-onlycurrentThe number of OAM F4 cells received, with AIS(Alarm Indication Signal) bit set.
1.3.6.1.4.1.2636.3.10.4.1.16ColumnjnxAtmTrunkOutOAMF4AISCellsread-onlycurrentThe number of OAM F4 cells sent, with AIS(Alarm Indication Signal) bit set.
Type Definitions
NameSyntaxStatusDescription
JnxAtmFlagsBITS { inverseArpEnabled(0), ilmiEnabled(1), oamEnabled(2), shapingEnabled(3), passiveOam(4), multicast(5), closed(6), down(7), active(8), cosEnabled(9) }currentFlags related to the VC or Trunk.
MIB Viewer