JUNIPER-COLLECTOR-MIB
80 objects
Provides data about each of the Collector PICs on a router.
Imported Objects
| HCNUM-TC | -- RFC2851 CounterBasedGauge64 |
| IF-MIB | ifDescr ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| JUNIPER-SMI | jnxCollectorNotifications jnxMibs |
| SNMPv2-SMI | Counter64 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.28 | IdentityjnxCollectorMIB | Provides data about each of the Collector PICs on a router. | ||
| 1.3.6.1.4.1.2636.3.28.1 | IdentityjnxCollGlobalStats | current | Global, router-wide collector stats. | |
| 1.3.6.1.4.1.2636.3.28.1.1 | ScalarjnxCollGlobalCreatedFiles | read-only | current | The total number of file created by all the collector pics on the router since the last time the router was reset. |
| 1.3.6.1.4.1.2636.3.28.1.2 | ScalarjnxCollGlobalOpenFiles | read-only | current | The total number of open collector files currently present on the router. |
| 1.3.6.1.4.1.2636.3.28.2 | TablejnxCollPicIfTable | not-accessible | current | Data about each collector pic currently present on the router. |
| 1.3.6.1.4.1.2636.3.28.2.1 | RowjnxCollPicIfEntry | not-accessible | current | Each entry provides information about a single Collector PIC. Each Collector PIC contains a single interface and is identified by its ifIndex. |
| 1.3.6.1.4.1.2636.3.28.2.1.1 | ColumnjnxCollPicIfCreatedFiles | read-only | current | The total number of files created by this Collector PIC since the last time the PIC was reset. |
| 1.3.6.1.4.1.2636.3.28.2.1.2 | ColumnjnxCollPicIfCreatedFileRate | read-only | current | The number of files created per second, measured over the current 10 second interval. |
| 1.3.6.1.4.1.2636.3.28.2.1.3 | ColumnjnxCollPicIfPeakCreatedFileRate | read-only | current | The peak number of files created per second. |
| 1.3.6.1.4.1.2636.3.28.2.1.4 | ColumnjnxCollPicIfExportedFiles | read-only | current | The total number of files exported by this Collector PIC. |
| 1.3.6.1.4.1.2636.3.28.2.1.5 | ColumnjnxCollPicIfExportedFileRate | read-only | current | The number of files exported per second, measured over the current 10 second interval. |
| 1.3.6.1.4.1.2636.3.28.2.1.6 | ColumnjnxCollPicIfPeakExportedFileRate | read-only | current | The peak number of files exported per second. |
| 1.3.6.1.4.1.2636.3.28.2.1.7 | ColumnjnxCollPicIfDestroyedFiles | read-only | current | The total number of files destroyed by this Collector PIC. |
| 1.3.6.1.4.1.2636.3.28.2.1.8 | ColumnjnxCollPicIfDestroyedFileRate | read-only | current | The number of files destroyed per second, as measured over the current 10 second interval. |
| 1.3.6.1.4.1.2636.3.28.2.1.9 | ColumnjnxCollPicIfPeakDestroyedFileRate | read-only | current | The peak number of files destroyed per second. |
| 1.3.6.1.4.1.2636.3.28.2.1.10 | ColumnjnxCollPicIfProcRecords | read-only | current | The total number of flow records processed by this Collector PIC. |
| 1.3.6.1.4.1.2636.3.28.2.1.11 | ColumnjnxCollPicIfProcRecordsRate | read-only | current | The number of flow records processed per seconds, measured during the current 10 second interval. |
| 1.3.6.1.4.1.2636.3.28.2.1.12 | ColumnjnxCollPicIfPeakProcRecordsRate | read-only | current | The peak number of flow records processed. |
| 1.3.6.1.4.1.2636.3.28.2.1.13 | ColumnjnxCollPicIfMemoryUsed | read-only | current | The amount of memory used, in bytes, by this Collector PIC. |
| 1.3.6.1.4.1.2636.3.28.2.1.14 | ColumnjnxCollPicIfMemoryFree | read-only | current | The amount of memory free, in bytes, on this Collector PIC. |
| 1.3.6.1.4.1.2636.3.28.2.1.15 | ColumnjnxCollPicIfFtpBytes | read-only | current | The total number of bytes transferred via FTP by this Collector PIC. |
| 1.3.6.1.4.1.2636.3.28.2.1.16 | ColumnjnxCollPicIfFtpByteRate | read-only | current | The number of bytes per second transfered via FTP measured during the current 10 second interval. |
| 1.3.6.1.4.1.2636.3.28.2.1.17 | ColumnjnxCollPicIfPeakFtpByteRate | read-only | current | The peak number of bytes per second transferred via FTP. |
| 1.3.6.1.4.1.2636.3.28.2.1.18 | ColumnjnxCollPicIfFtpFiles | read-only | current | The total number of files transferred via FTP by this Collector PIC. |
| 1.3.6.1.4.1.2636.3.28.2.1.19 | ColumnjnxCollPicIfFtpFileRate | read-only | current | The number of files per second transferred via FTP. |
| 1.3.6.1.4.1.2636.3.28.2.1.20 | ColumnjnxCollPicIfPeakFtpFileRate | read-only | current | The peak number of files per second transferred via FTP. |
| 1.3.6.1.4.1.2636.3.28.2.1.21 | ColumnjnxCollPicIfFtpFailures | read-only | current | The total number of FTP transfer failures on this Collector PIC. |
| 1.3.6.1.4.1.2636.3.28.2.1.22 | ColumnjnxCollPicIfCurrentState | read-only | current | The current state of various error conditions on this Collector PIC. |
| 1.3.6.1.4.1.2636.3.28.2.1.23 | ColumnjnxCollPicIfLastStateChange | read-only | current | Identifies the error condition that last changed state. |
| 1.3.6.1.4.1.2636.3.28.2.1.24 | ColumnjnxCollPicIfStateChangeTime | read-only | current | The value of sysUpTime when the management subsystem last learned of a change to the value of jnxCollPicIfCurrentState for this Collector PIC. |
| 1.3.6.1.4.1.2636.3.28.2.1.25 | ColumnjnxCollPicIfStateChangeDate | read-only | current | The system date and time when the management subsystem last learned of a change to the value of jnxCollPicIfCurrentState for this Collector PIC. |
| 1.3.6.1.4.1.2636.3.28.2.1.26 | ColumnjnxCollPicIfStateChangeType | read-only | current | This indicates whether the last state change set a new error condition or cleared an existing one. |
| 1.3.6.1.4.1.2636.3.28.3 | TablejnxCollFileTable | not-accessible | current | Data about each collector file currently present on the router. |
| 1.3.6.1.4.1.2636.3.28.3.1 | RowjnxCollFileEntry | not-accessible | current | Each entry provides information about a single file currently open on this Collector PIC. Each Collector PIC File is identified by the ifIndex associated with … |
| 1.3.6.1.4.1.2636.3.28.3.1.1 | ColumnjnxCollFileName | not-accessible | current | The name of a Collector File on this Collector PIC. |
| 1.3.6.1.4.1.2636.3.28.3.1.2 | ColumnjnxCollFileFname | read-only | current | The name of a Collector File on this Collector PIC. This object is included for those NM applications that can't parse the file name from the instance portion … |
| 1.3.6.1.4.1.2636.3.28.3.1.3 | ColumnjnxCollFileRecords | read-only | current | The number of flow records in this file. |
| 1.3.6.1.4.1.2636.3.28.3.1.4 | ColumnjnxCollFileRecordRate | read-only | current | The number of flow records per second added to this file, measured during the current 10 second interval. |
| 1.3.6.1.4.1.2636.3.28.3.1.5 | ColumnjnxCollFilePeakRecordRate | read-only | current | The peak number of flow records per second added to this file. |
| 1.3.6.1.4.1.2636.3.28.3.1.6 | ColumnjnxCollFileUncompBytes | read-only | current | The number of uncompressed bytes in this file. |
| 1.3.6.1.4.1.2636.3.28.3.1.7 | ColumnjnxCollFileUncompByteRate | read-only | current | The number of uncompressed bytes per second added to this file. |
| 1.3.6.1.4.1.2636.3.28.3.1.8 | ColumnjnxCollFilePeakUncompByteRate | read-only | current | The peak number of uncompressed bytes per second added to this file. |
| 1.3.6.1.4.1.2636.3.28.3.1.9 | ColumnjnxCollFileCompBytes | read-only | current | The number of compressed bytes in this file. |
| 1.3.6.1.4.1.2636.3.28.3.1.10 | ColumnjnxCollFileCompByteRate | read-only | current | The number of compressed bytes per second added to this file, measured during the current 10 second interval. |
| 1.3.6.1.4.1.2636.3.28.3.1.11 | ColumnjnxCollFilePeakCompByteRate | read-only | current | The peak number of compressed bytes per second added to this file. |
| 1.3.6.1.4.1.2636.3.28.3.1.12 | ColumnjnxCollFileBlocks | read-only | current | The number of blocks in this file. |
| 1.3.6.1.4.1.2636.3.28.3.1.14 | ColumnjnxCollFileCompBlocks | read-only | current | The number of compressed blocks in this file. |
| 1.3.6.1.4.1.2636.3.28.3.1.15 | ColumnjnxCollFileTransferAttempts | read-only | current | The number of FTP transfer attempts for this file. |
| 1.3.6.1.4.1.2636.3.28.3.1.16 | ColumnjnxCollFileState | read-only | current | The current state of this file. |
| 1.3.6.1.4.1.2636.3.28.4 | IdentityjnxCollNotifyVars | current | Notification object definitions. | |
| 1.3.6.1.4.1.2636.3.28.4.1 | ScalarjnxCollNotifyUrl | accessible-for-notify | current | The URL associated with a file transfer destination. |
| 1.3.6.1.4.1.2636.3.28.4.2 | ScalarjnxCollNotifyInetType | accessible-for-notify | current | Used with jnxCollNotifyInetAddress to identify a specific file transfer destination. |
| 1.3.6.1.4.1.2636.3.28.4.3 | ScalarjnxCollNotifyInetAddress | accessible-for-notify | current | Used with jnxCollNotifyInetType to identify a specific file transfer destination. |
| 1.3.6.1.4.1.2636.3.28.4.4 | ScalarjnxCollNotifyError | accessible-for-notify | current | Description of error encountered when trying to transfer a file. |
| 1.3.6.1.4.1.2636.3.28.4.5 | ScalarjnxCollNotifyFile | accessible-for-notify | current | Identifies a specific file for notifications that refer to a file. |
| 1.3.6.1.4.1.2636.3.28.4.6 | ScalarjnxCollNotifyFtpResultCode | accessible-for-notify | current | Provides the FTP result code for file transfer notifications. |
| 1.3.6.1.4.1.2636.3.28.4.7 | ScalarjnxCollNotifyFtpErrorText | accessible-for-notify | current | Provides the FTP error text for file transfer notifications. |
| 1.3.6.1.4.1.2636.3.28.4.8 | ScalarjnxCollNotifyMemUtil | accessible-for-notify | current | Provides the current memory utilization for pic overload notifications. |
| 1.3.6.1.4.1.2636.3.28.4.9 | ScalarjnxCollNotifyMemFree | accessible-for-notify | current | Provides the current amount of free memory for pic overload notifications. |
| 1.3.6.1.4.1.2636.3.28.4.10 | ScalarjnxCollNotifyMemThresh | accessible-for-notify | current | Provides the current memory threshold used for determining memory unavailable conditions. |
| 1.3.6.1.4.1.2636.3.28.4.11 | ScalarjnxCollNotifyNewRecordRate | accessible-for-notify | current | Provides the current number of new records per second created on this Collector PIC. |
| 1.3.6.1.4.1.2636.3.28.4.12 | ScalarjnxCollNotifyOverloadType | accessible-for-notify | current | Identifies a specific type of flow overload condition on this Collector PIC. |
| 1.3.6.1.4.1.2636.3.28.4.13 | ScalarjnxCollNotifyDate | accessible-for-notify | current | Provides the current system date and time. |
| 1.3.6.1.4.1.2636.3.28.4.14 | ScalarjnxCollNotifyFromFtpServerInetType | accessible-for-notify | current | Used with jnxCollNotifyFromFtpServerInetAddress to identify a specific FTP server address. |
| 1.3.6.1.4.1.2636.3.28.4.15 | ScalarjnxCollNotifyFromFtpServerInetAddress | accessible-for-notify | current | The FTP server address from which the switchover occurs. |
| 1.3.6.1.4.1.2636.3.28.4.16 | ScalarjnxCollNotifyFromFtpServerType | accessible-for-notify | current | The FTP server Type from which the switchover occurs. |
| 1.3.6.1.4.1.2636.3.28.4.17 | ScalarjnxCollNotifyToFtpServerInetType | accessible-for-notify | current | Used with jnxCollNotifyToFtpServerInetAddress to identify a specific FTP server address. |
| 1.3.6.1.4.1.2636.3.28.4.18 | ScalarjnxCollNotifyToFtpServerInetAddress | accessible-for-notify | current | The FTP server address to which the switchover occurs. |
| 1.3.6.1.4.1.2636.3.28.4.19 | ScalarjnxCollNotifyToFtpServerType | accessible-for-notify | current | The FTP server Type to which the switchover occurs. |
| 1.3.6.1.4.1.2636.3.28.4.20 | ScalarjnxCollNotifyInitiatedBy | accessible-for-notify | current | Identify what initiates the FTP switchover. |
| 1.3.6.1.4.1.2636.4.8.0 | IdentityjnxCollNotificationPrefix | current | All collector notifications are registered under this branch. | |
| 1.3.6.1.4.1.2636.4.8.0.1 | NotificationjnxCollUnavailableDest | current | Notification of an unavailable destination failure encountered while transferring a collector file. | |
| 1.3.6.1.4.1.2636.4.8.0.2 | NotificationjnxCollUnavailableDestCleared | current | This indicates a previous unavailable destination failure has been resolved. | |
| 1.3.6.1.4.1.2636.4.8.0.3 | NotificationjnxCollUnsuccessfulTransfer | current | This indicates an error was encountered while attempting a file transfer. | |
| 1.3.6.1.4.1.2636.4.8.0.4 | NotificationjnxCollFlowOverload | current | This indicates a soft or hard flow overload condition has been triggered. | |
| 1.3.6.1.4.1.2636.4.8.0.5 | NotificationjnxCollFlowOverloadCleared | current | This indicates a soft or hard flow overload condition has been cleared. | |
| 1.3.6.1.4.1.2636.4.8.0.6 | NotificationjnxCollMemoryUnavailable | current | This indicates a memory unavailable condition has been triggered. | |
| 1.3.6.1.4.1.2636.4.8.0.7 | NotificationjnxCollMemoryAvailable | current | This indicates a memory unavailable condition has been cleared. | |
| 1.3.6.1.4.1.2636.4.8.0.8 | NotificationjnxCollFtpSwitchover | current | This indicates an FTP server switchover has occurred. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| JnxCollPicStateDef | BITS { jnxCollStateSoftOverload(0), jnxCollStateHardOverload(1), jnxCollStateMemoryUnavail(2) } jnxCollGlobalStats OBJECT-IDENTITY STATUS current DESCRIPTION "Global, router-wide collector stats." ::= { jnxCollectorMIB 1 } | current | Identifies specific error conditions that may exist on a Collector PIC. |