JUNIPER-DFC-MIB
78 objects
This is Juniper Networks' implementation of enterprise specific MIB for Dynamic Flow Capture (DFC)
Imported Objects
| IF-MIB | -- RFC 2571 InterfaceIndex |
| JUNIPER-SMI | jnxDfcNotifications jnxMibs |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter64 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.33 | IdentityjnxDfc | This is Juniper Networks' implementation of enterprise specific MIB for Dynamic Flow Capture (DFC) | ||
| 1.3.6.1.4.1.2636.3.33.1 | TablejnxDfcCSTable | not-accessible | current | Statistics information for Control Source. |
| 1.3.6.1.4.1.2636.3.33.1.1 | RowjnxDfcCSEntry | not-accessible | current | An entry of DFC Control Source table. |
| 1.3.6.1.4.1.2636.3.33.1.1.1 | ColumnjnxDfcGrpName | not-accessible | current | The name assigned to a DFC group. A DFC group defines a set of DFC PICs that share same static/dynamic configuration. |
| 1.3.6.1.4.1.2636.3.33.1.1.2 | ColumnjnxDfcCSId | not-accessible | current | Control Source identifier. Control Source identifies Juniper router with one unique Control IP address. There can be multiple IP addresses from which a Control… |
| 1.3.6.1.4.1.2636.3.33.1.1.3 | ColumnjnxDfcCSControlProtocolAddRequests | read-only | current | Total number of Control protocol Add requests received. The add request specifies a new filter criteria to be merged with the existing tasking list for a given… |
| 1.3.6.1.4.1.2636.3.33.1.1.4 | ColumnjnxDfcCSCriteriaAdded | read-only | current | Total number of filter criteria added successfully by the Control Source. |
| 1.3.6.1.4.1.2636.3.33.1.1.5 | ColumnjnxDfcCSCriteriaAdditionFailed | read-only | current | Total number of filter criteria addition failed. |
| 1.3.6.1.4.1.2636.3.33.1.1.6 | ColumnjnxDfcCSControlProtocolDeleteRequests | read-only | current | Total number of Control protocol delete requests received. The delete request removes a particular filter criterion. |
| 1.3.6.1.4.1.2636.3.33.1.1.7 | ColumnjnxDfcCSCriteriaDeleted | read-only | current | Total number of filter criteria deleted successfully as requested by Control Source. |
| 1.3.6.1.4.1.2636.3.33.1.1.8 | ColumnjnxDfcCSCriteriaDeletionFailed | read-only | current | Total number of filter criteria deletion failed. |
| 1.3.6.1.4.1.2636.3.33.1.1.9 | ColumnjnxDfcCSCriteriaDeletedTimeoutIdle | read-only | current | Total number of criteria deleted by timeout idle. |
| 1.3.6.1.4.1.2636.3.33.1.1.10 | ColumnjnxDfcCSCriteriaDeletedTimeoutTotal | read-only | current | Total number of criteria deleted by timeout total. |
| 1.3.6.1.4.1.2636.3.33.1.1.11 | ColumnjnxDfcCSCriteriaDeletedPackets | read-only | current | Total number of criteria deleted by packets. |
| 1.3.6.1.4.1.2636.3.33.1.1.12 | ColumnjnxDfcCSCriteriaDeletedBytes | read-only | current | Total number of criteria deleted by bytes. |
| 1.3.6.1.4.1.2636.3.33.1.1.13 | ColumnjnxDfcCSControlProtocolRefreshRequests | read-only | current | Total number of Control protocol Refresh requests received. The refresh request updates the timeout for a particular filter criterion or set of filter criteria… |
| 1.3.6.1.4.1.2636.3.33.1.1.14 | ColumnjnxDfcCSCriteriaRefreshed | read-only | current | Total number of filter criteria refreshed successfully as requested by Control Source. |
| 1.3.6.1.4.1.2636.3.33.1.1.15 | ColumnjnxDfcCSCriteriaRefreshFailed | read-only | current | Total number of filter criteria refresh request failed. |
| 1.3.6.1.4.1.2636.3.33.1.1.16 | ColumnjnxDfcCSControlProtocolListRequests | read-only | current | Total number of Control protocol List requests received. The List request returns a list of all criteria that a particular Control Source has added and are cur… |
| 1.3.6.1.4.1.2636.3.33.1.1.17 | ColumnjnxDfcCSListSuccess | read-only | current | Total number of list commands processed successfully as requested by Control Source. |
| 1.3.6.1.4.1.2636.3.33.1.1.18 | ColumnjnxDfcCSListFailed | read-only | current | Total number of list commands that could not be processed successfully. |
| 1.3.6.1.4.1.2636.3.33.1.1.19 | ColumnjnxDfcCSControlProtocolNoopRequests | read-only | current | Total number of Control protocol Noop requests received. The purpose of this request is to verify the end-to-end connectivity between Control Source and DFC PI… |
| 1.3.6.1.4.1.2636.3.33.1.1.20 | ColumnjnxDfcCSNoopSuccess | read-only | current | Total number of Noop requests processed successfully as requested by Control Source. |
| 1.3.6.1.4.1.2636.3.33.1.1.21 | ColumnjnxDfcCSNoopFailed | read-only | current | Total number of Noop requests that could not be processed successfully. |
| 1.3.6.1.4.1.2636.3.33.1.1.22 | ColumnjnxDfcCSDynamicCriteriaActive | read-only | current | Total number of active dynamic filter criteria. |
| 1.3.6.1.4.1.2636.3.33.1.1.23 | ColumnjnxDfcCSStaticCriteriaActive | read-only | current | Total number of active static filter criteria. |
| 1.3.6.1.4.1.2636.3.33.1.1.24 | ColumnjnxDfcCSBadRequest | read-only | current | Total number of Bad requests received. |
| 1.3.6.1.4.1.2636.3.33.1.1.25 | ColumnjnxDfcCSResponseSuccessful | read-only | current | Total number of successful response(s) corresponding to the requests (add, delete, refresh, list and noop) sent out to the Control Source. |
| 1.3.6.1.4.1.2636.3.33.1.1.26 | ColumnjnxDfcCSResponseImproperCriteria | read-only | current | Total number of response(s) generated because of improper filter criterion specification in the add request. |
| 1.3.6.1.4.1.2636.3.33.1.1.27 | ColumnjnxDfcCSResponseUnknownContentDest | read-only | current | Total number of response(s) generated because of unknown Content Destination specified in the add, delete, refresh and list request. |
| 1.3.6.1.4.1.2636.3.33.1.1.28 | ColumnjnxDfcCSResponseUnknownCriteriaId | read-only | current | Total number of response(s) generated because of unknown Criteria Identifier specified in the delete, refresh and list request. |
| 1.3.6.1.4.1.2636.3.33.1.1.29 | ColumnjnxDfcCSResponseImproperTimeout | read-only | current | Total number of response(s) generated because of improper timeout specified in the add and refresh request. |
| 1.3.6.1.4.1.2636.3.33.1.1.30 | ColumnjnxDfcCSResponseInvalidAuthentication | read-only | current | Total number of response(s) generated because of invalid authentication specified in the add, delete, refresh, list and noop request. |
| 1.3.6.1.4.1.2636.3.33.1.1.31 | ColumnjnxDfcCSResponseInvalidSequenceNumber | read-only | current | Total number of response(s) generated because of invalid Sequence Number specified in the add, delete, refresh, list and noop request. |
| 1.3.6.1.4.1.2636.3.33.1.1.32 | ColumnjnxDfcCSResponseInternalError | read-only | current | Total number of response(s) generated because of internal error at the DFC PIC in processing a request. |
| 1.3.6.1.4.1.2636.3.33.1.1.33 | ColumnjnxDfcCSNotificationRestart | read-only | current | Total number of Restart notifications sent to configured notification-recipients. This notification will be generated when the system experiences a failure suc… |
| 1.3.6.1.4.1.2636.3.33.1.1.34 | ColumnjnxDfcCSNotificationRollover | read-only | current | Total number of Rollover notifications sent to configured notification-recipients. This notification will be generated when the DFC PIC experiences a sequence … |
| 1.3.6.1.4.1.2636.3.33.1.1.35 | ColumnjnxDfcCSNotificationNoop | read-only | current | Total number of Noop notifications sent to configured notification-recipents. This notification will be generated when the DFC PIC receives a Noop message with… |
| 1.3.6.1.4.1.2636.3.33.1.1.36 | ColumnjnxDfcCSNotificationTimeout | read-only | current | Total number of Timeout notifications sent to configured notification-recipents. This notification will be generated when the DFC PIC times out a filter criter… |
| 1.3.6.1.4.1.2636.3.33.1.1.37 | ColumnjnxDfcCSNotificationCongestion | read-only | current | Total number of Congestion notifications sent to configured notification-recipents. This notification will be generated when the 10-second average packet forwa… |
| 1.3.6.1.4.1.2636.3.33.1.1.38 | ColumnjnxDfcCSNotificationCongestionDelete | read-only | current | Total number of Congestion Delete notifications sent to configured notification-recipents. This notification will be generated when the total 10-second average… |
| 1.3.6.1.4.1.2636.3.33.1.1.39 | ColumnjnxDfcCSNotificationDuplicatesDropped | read-only | current | Total number of Duplicates Dropped notifications sent to configured notification-recipents. This notification will be generated when the configurable Maximum D… |
| 1.3.6.1.4.1.2636.3.33.1.1.40 | ColumnjnxDfcCSAddRequestRate | read-only | current | The request processing rate (requests processed/second). |
| 1.3.6.1.4.1.2636.3.33.1.1.41 | ColumnjnxDfcCSAddRequestPeakRate | read-only | current | The peak request processing rate (requests processed/second). |
| 1.3.6.1.4.1.2636.3.33.1.1.42 | ColumnjnxDfcCSAggrCriteriaBandwidth | read-only | current | Bandwidth in bits/second. |
| 1.3.6.1.4.1.2636.3.33.1.1.43 | ColumnjnxDfcCSSequenceNumber | read-only | current | Protocol sequence number. |
| 1.3.6.1.4.1.2636.3.33.2 | TablejnxDfcCDTable | not-accessible | current | Statistics information for content destination. |
| 1.3.6.1.4.1.2636.3.33.2.1 | RowjnxDfcCDEntry | not-accessible | current | An entry of DFC Content-Destination table. |
| 1.3.6.1.4.1.2636.3.33.2.1.1 | ColumnjnxDfcCDId | not-accessible | current | Content Destination identifier. A Content Destination is the recipient of the extracted data, once it is forwarded by the Server. |
| 1.3.6.1.4.1.2636.3.33.2.1.2 | ColumnjnxDfcCDCriteria | read-only | current | Total number of filter criteria configured for the Content Destination. |
| 1.3.6.1.4.1.2636.3.33.2.1.3 | ColumnjnxDfcCDByteRate | read-only | current | Average data rate (in bytes/second) summed over all active filter criteria to a configured Content Destination. |
| 1.3.6.1.4.1.2636.3.33.2.1.4 | ColumnjnxDfcCDMatchedPackets | read-only | current | Total number of packets matching the filter criteria configured for the Content Destination. |
| 1.3.6.1.4.1.2636.3.33.2.1.5 | ColumnjnxDfcCDMatchedBytes | read-only | current | Total number of bytes matching the filter criteria configured for the Content Destination. |
| 1.3.6.1.4.1.2636.3.33.2.1.6 | ColumnjnxDfcCDCongestionNotification | read-only | current | Total number of Congestion Notifications sent to a configured notification-recipient. |
| 1.3.6.1.4.1.2636.3.33.3 | IdentityjnxDfcNotifyVars | current | Notification object definitions. | |
| 1.3.6.1.4.1.2636.3.33.3.1 | ScalarjnxDfcInterfaceName | accessible-for-notify | current | The textual name of the DFC interface. |
| 1.3.6.1.4.1.2636.3.33.3.2 | ScalarjnxDfcInputPktRate | accessible-for-notify | current | data packet rate (in packets per second). |
| 1.3.6.1.4.1.2636.3.33.3.3 | ScalarjnxDfcPpsSoftOverloadLowWatermark | accessible-for-notify | current | Configured lowest value for data packet rate (in packets per second). |
| 1.3.6.1.4.1.2636.3.33.3.4 | ScalarjnxDfcPpsSoftOverloadHighWatermark | accessible-for-notify | current | Configured highest value for data packet rate (in packets per second). |
| 1.3.6.1.4.1.2636.3.33.3.5 | ScalarjnxDfcPpsHardOverloadLowWatermark | accessible-for-notify | current | Recommended lowest value for data packet rate (in packets per second). |
| 1.3.6.1.4.1.2636.3.33.3.6 | ScalarjnxDfcPpsHardOverloadHighWatermark | accessible-for-notify | current | Recommended highest value for data packet rate (in packets per second). |
| 1.3.6.1.4.1.2636.3.33.3.7 | ScalarjnxDfcFlowsUsage | accessible-for-notify | current | % usage of total number of flows in system. |
| 1.3.6.1.4.1.2636.3.33.3.8 | ScalarjnxDfcCriteriaUsage | accessible-for-notify | current | % usage of matching criteria for all filters. |
| 1.3.6.1.4.1.2636.3.33.3.9 | ScalarjnxDfcMemSoftOverloadLowWatermark | accessible-for-notify | current | Configured lowest watermark percent for memory load. |
| 1.3.6.1.4.1.2636.3.33.3.10 | ScalarjnxDfcMemSoftOverloadHighWatermark | accessible-for-notify | current | Configured highest watermark percent for memory load. |
| 1.3.6.1.4.1.2636.3.33.3.11 | ScalarjnxDfcFlowLowWatermark | accessible-for-notify | current | Recommended lowest value for number of flows allowed in the system. |
| 1.3.6.1.4.1.2636.3.33.3.12 | ScalarjnxDfcFlowHighWatermark | accessible-for-notify | current | Recommended highest value for number of flows allowed in the system. |
| 1.3.6.1.4.1.2636.3.33.3.13 | ScalarjnxDfcCriteriaLowWatermark | accessible-for-notify | current | Recommended lowest value for number of criterias allowed in the system. |
| 1.3.6.1.4.1.2636.3.33.3.14 | ScalarjnxDfcCriteriaHighWatermark | accessible-for-notify | current | Recommended highest value for number of criterias allowed in the system. |
| 1.3.6.1.4.1.2636.4.11.0 | IdentityjnxDfcNotificationPrefix | current | All DFC notifications are registered under this branch. | |
| 1.3.6.1.4.1.2636.4.11.0.1 | NotificationjnxDfcSoftPpsThresholdExceeded | current | Notification of input packet rate (in packet per second) going beyond the configured limit. | |
| 1.3.6.1.4.1.2636.4.11.0.2 | NotificationjnxDfcSoftPpsUnderThreshold | current | Notification of input packet rate (in packet per second) dropping back to below the configured limit. | |
| 1.3.6.1.4.1.2636.4.11.0.3 | NotificationjnxDfcHardPpsThresholdExceeded | current | Notification of input packet rate (in packet per second) going beyond the recommended limit. | |
| 1.3.6.1.4.1.2636.4.11.0.4 | NotificationjnxDfcHardPpsUnderThreshold | current | Notification of input packet rate (in packet per second) dropping back to below the recommended limit. | |
| 1.3.6.1.4.1.2636.4.11.0.5 | NotificationjnxDfcSoftMemThresholdExceeded | current | Notification of memory overload condition i.e memory usage is going beyond the configured limit. | |
| 1.3.6.1.4.1.2636.4.11.0.6 | NotificationjnxDfcSoftMemUnderThreshold | current | Notification of memory usage dropping back to below the configured limit. | |
| 1.3.6.1.4.1.2636.4.11.0.7 | NotificationjnxDfcHardMemThresholdExceeded | current | Notification of memory overload condition i.e memory usage is going beyond the recommended limit. | |
| 1.3.6.1.4.1.2636.4.11.0.8 | NotificationjnxDfcHardMemUnderThreshold | current | Notification of memory usage dropping back to below the recommended limit. |