JUNIPER-IF-MIB
81 objects
The MIB modules extends the ifTable as defined in IF-MIB.
Imported Objects
| HCNUM-TC | CounterBasedGauge64 |
| IF-MIB | ifEntry ifIndex |
| JUNIPER-SMI | jnxMibs |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.3 | IdentityifJnx | The MIB modules extends the ifTable as defined in IF-MIB. | ||
| 1.3.6.1.4.1.2636.3.3.1 | TableifJnxTable | not-accessible | current | A list of Juniper's extension to the interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the… |
| 1.3.6.1.4.1.2636.3.3.1.1 | RowifJnxEntry | not-accessible | current | An entry containing additional management information applicable to a particular interface. |
| 1.3.6.1.4.1.2636.3.3.1.1.1 | ColumnifIn1SecRate | read-only | current | The number of bits per second (bps), delivered by this (sub-)layer to its next higher (sub-)layer. |
| 1.3.6.1.4.1.2636.3.3.1.1.2 | ColumnifIn1SecOctets | read-only | current | The number of octets per second (Bps, Bytes per second), delivered by this (sub-)layer to its next higher (sub-)layer. |
| 1.3.6.1.4.1.2636.3.3.1.1.3 | ColumnifIn1SecPkts | read-only | current | The number of packets per second (pps), delivered by this (sub-)layer to its next higher (sub-)layer. |
| 1.3.6.1.4.1.2636.3.3.1.1.4 | ColumnifOut1SecRate | read-only | current | The number of bits per second (bps), delivered by this (sub-)layer to its next lower (sub-)layer. |
| 1.3.6.1.4.1.2636.3.3.1.1.5 | ColumnifOut1SecOctets | read-only | current | The number of octets per second (Bps, Bytes per second), delivered by this (sub-)layer to its next lower (sub-)layer. |
| 1.3.6.1.4.1.2636.3.3.1.1.6 | ColumnifOut1SecPkts | read-only | current | The number of packets per second (pps), delivered by this (sub-)layer to its next lower (sub-)layer. |
| 1.3.6.1.4.1.2636.3.3.1.1.7 | ColumnifHCIn1SecRate | read-only | current | The number of bits per second (bps), delivered by this (sub-)layer to its next higher (sub-)layer. This object is a 64 bit version of ifIn1SecRate. |
| 1.3.6.1.4.1.2636.3.3.1.1.8 | ColumnifHCOut1SecRate | read-only | current | The number of bits per second (bps), delivered by this (sub-)layer to its next lower (sub-)layer. This object is a 64 bit version of ifOut1SecRate. |
| 1.3.6.1.4.1.2636.3.3.1.1.9 | ColumnifJnxInErrors | read-only | current | Errors: The sum of the incoming frame aborts and FCS errors. |
| 1.3.6.1.4.1.2636.3.3.1.1.10 | ColumnifJnxInFrameErrors | read-only | current | Framing Errors: The number of input packets which were misaligned. |
| 1.3.6.1.4.1.2636.3.3.1.1.11 | ColumnifJnxInQDrops | read-only | current | Drops: The number of packets dropped by the input queue of the I/O Manager ASIC. |
| 1.3.6.1.4.1.2636.3.3.1.1.12 | ColumnifJnxInRunts | read-only | current | Runts: Frames received that are smaller than the runt threshold. |
| 1.3.6.1.4.1.2636.3.3.1.1.13 | ColumnifJnxInGiants | read-only | current | Giants: Frames received that are larger than the giant threshold. |
| 1.3.6.1.4.1.2636.3.3.1.1.14 | ColumnifJnxInDiscards | read-only | current | Policed Discards: Frames that the incoming packet match code discarded because they were not recognized or of interest. |
| 1.3.6.1.4.1.2636.3.3.1.1.15 | ColumnifJnxInHslCrcErrors | read-only | current | HS Link CRC Errors: The number of CRC errors on the high-speed links between the ASICs responsible for handling the router interfaces while receiving packets. |
| 1.3.6.1.4.1.2636.3.3.1.1.16 | ColumnifJnxInHslFifoOverFlows | read-only | current | HS link FIFO overflows: The number of FIFO overflows on the high-speed links between the ASICs responsible for handling the router interfaces. |
| 1.3.6.1.4.1.2636.3.3.1.1.17 | ColumnifJnxInL3Incompletes | read-only | current | L3 incompletes: The number of incoming packets that fail Layer 3 sanity checks of the header. |
| 1.3.6.1.4.1.2636.3.3.1.1.18 | ColumnifJnxInL2ChanErrors | read-only | current | L2 channel errors: the number of incoming packets for which the sofware could not find a valid logical interface. |
| 1.3.6.1.4.1.2636.3.3.1.1.19 | ColumnifJnxInL2MismatchTimeouts | read-only | current | L2 mismatch timeouts: The count of malformed or short packets that cause the incoming packet handler to discard the frame as unreadable. |
| 1.3.6.1.4.1.2636.3.3.1.1.20 | ColumnifJnxInInvalidVCs | read-only | current | Invalid VCs: Number of cells that arrived for a nonexistent virtual circuit. |
| 1.3.6.1.4.1.2636.3.3.1.1.21 | ColumnifJnxInFifoErrors | read-only | current | FIFO errors: The number of FIFO errors in the receive direction as reported by the ASIC on the PIC. |
| 1.3.6.1.4.1.2636.3.3.1.1.22 | ColumnifJnxBucketDrops | read-only | current | Bucket drops: Drops due to traffic load exceeding the interface transmit/receive leaky bucket configuration. |
| 1.3.6.1.4.1.2636.3.3.1.1.23 | ColumnifJnxSramErrors | read-only | current | SRAM errors: This counter increments when a hardware error has occurred in the SRAM on the PIC. |
| 1.3.6.1.4.1.2636.3.3.1.1.24 | ColumnifJnxOutErrors | read-only | current | Errors: The sum of the outgoing frame aborts and FCS errors. |
| 1.3.6.1.4.1.2636.3.3.1.1.25 | ColumnifJnxCollisions | read-only | current | Collisions: The number of output collisions detected on this interface. |
| 1.3.6.1.4.1.2636.3.3.1.1.26 | ColumnifJnxCarrierTrans | read-only | current | Carrier transitions: The number of times the interface saw the carrier signal transition. |
| 1.3.6.1.4.1.2636.3.3.1.1.27 | ColumnifJnxOutQDrops | read-only | current | Drops: The number of packets dropped by the output queue of the I/O Manager ASIC. |
| 1.3.6.1.4.1.2636.3.3.1.1.28 | ColumnifJnxOutAgedErrors | read-only | current | Aged packets: The number of packets that remained in shared packet SDRAM for so long that the system automatically purged them. |
| 1.3.6.1.4.1.2636.3.3.1.1.29 | ColumnifJnxOutFifoErrors | read-only | current | FIFO errors: The number of FIFO errors in the transmit direction as reported by the ASIC on the PIC. |
| 1.3.6.1.4.1.2636.3.3.1.1.30 | ColumnifJnxOutHslFifoUnderFlows | read-only | current | HS link FIFO underflows: The number of FIFO underflows on the high-speed links between the ASICs responsible for handling the router interfaces. |
| 1.3.6.1.4.1.2636.3.3.1.1.31 | ColumnifJnxOutHslCrcErrors | read-only | current | HS Link CRC Errors: The number of CRC errors on the high-speed links between the ASICs responsible for handling the router interfaces while transmitting packet… |
| 1.3.6.1.4.1.2636.3.3.1.1.32 | ColumnifJnxCrcErrors | read-only | current | CRC Errors: The number of CRC errors |
| 1.3.6.1.4.1.2636.3.3.1.1.33 | ColumnifJnxFcsErrors | read-only | current | FCS Errors: The number of FCS errors |
| 1.3.6.1.4.1.2636.3.3.1.1.34 | ColumnifHCIn1SecOctets | read-only | current | The number of bytes per second (Bps), delivered by this (sub-)layer to its next higher (sub-)layer. This object is a 64 bit version of ifIn1SecOctets. |
| 1.3.6.1.4.1.2636.3.3.1.1.35 | ColumnifHCOut1SecOctets | read-only | current | The number of bytes per second (Bps), delivered by this (sub-)layer to its next lower (sub-)layer. This object is a 64 bit version of ifOut1SecOctets. |
| 1.3.6.1.4.1.2636.3.3.2 | TableifChassisTable | not-accessible | current | A list of Juniper's extension to the interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the… |
| 1.3.6.1.4.1.2636.3.3.2.1 | RowifChassisEntry | not-accessible | current | An entry containing additional management information applicable to a particular interface. |
| 1.3.6.1.4.1.2636.3.3.2.1.1 | ColumnifChassisFpc | read-only | current | The number of the FPC card on which the interface is located in the chassis. It is the chassis slot in which the FPC card is installed for the specified interf… |
| 1.3.6.1.4.1.2636.3.3.2.1.2 | ColumnifChassisPic | read-only | current | The number of the PIC card on which the interface is located in the chassis. It is the PIC location on the FPC card for the specified interface. Although the n… |
| 1.3.6.1.4.1.2636.3.3.2.1.3 | ColumnifChassisPort | read-only | current | The number of the port on the PIC card on which the interface is located in the chassis. It is the port number on the PIC card for the specified interface. Alt… |
| 1.3.6.1.4.1.2636.3.3.2.1.4 | ColumnifChassisChannel | read-only | current | The channel identifier for the specified interface if and only if it is part of a channelized interface. Although the channel is numbered from 0 and up in the … |
| 1.3.6.1.4.1.2636.3.3.2.1.5 | ColumnifChassisLogicalUnit | read-only | current | The logical unit number of the specified interface. It is the logical part of the interface that is configured on the physical or channel part if any. Although… |
| 1.3.6.1.4.1.2636.3.3.2.1.6 | ColumnifChassisPicIndex | read-only | current | The index or indices for the Chassis MIB tables. This is the instance index which keys into the jnxContentsTable in Chassis MIB. For example, it could return a… |
| 1.3.6.1.4.1.2636.3.3.3 | NodeifJnxNotification | |||
| 1.3.6.1.4.1.2636.3.3.3.0 | NodeifJnxNotificationPrefix | |||
| 1.3.6.1.4.1.2636.3.3.3.0.1 | NotificationifJnxErrors | current | A ifJnxErrors notification is sent when the value of ifJnxCrcErrors or ifJnxFcsErrors increases. | |
| 1.3.6.1.4.1.2636.3.3.4 | TableifJnxPolTable | not-accessible | current | A list of Juniper's extension to the interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the… |
| 1.3.6.1.4.1.2636.3.3.4.1 | RowifJnxPolEntry | not-accessible | current | An entry containing additional management information applicable to a particular interface. |
| 1.3.6.1.4.1.2636.3.3.4.1.1 | ColumnifJnxInPolLowOctets | read-only | current | Logical Interface Policer Input Low Bytes |
| 1.3.6.1.4.1.2636.3.3.4.1.2 | ColumnifJnxInPolLowPkts | read-only | current | Logical Interface Policer Input Low Pkts |
| 1.3.6.1.4.1.2636.3.3.4.1.3 | ColumnifJnxInPolLow1SecRate | read-only | current | Logical Interface Policer Input Low 1 Sec Rate |
| 1.3.6.1.4.1.2636.3.3.4.1.4 | ColumnifJnxInPolMLowOctets | read-only | current | Logical Interface Policer Input Medium Low Bytes |
| 1.3.6.1.4.1.2636.3.3.4.1.5 | ColumnifJnxInPolMLowPkts | read-only | current | Logical Interface Policer Input Medium Low Pkts |
| 1.3.6.1.4.1.2636.3.3.4.1.6 | ColumnifJnxInPolMLow1SecRate | read-only | current | Logical Interface Policer Input Medium Low 1 Sec Rate |
| 1.3.6.1.4.1.2636.3.3.4.1.7 | ColumnifJnxInPolMHighOctets | read-only | current | Logical Interface Policer Input Medium High Bytes |
| 1.3.6.1.4.1.2636.3.3.4.1.8 | ColumnifJnxInPolMHighPkts | read-only | current | Logical Interface Policer Input Medium High Pkts |
| 1.3.6.1.4.1.2636.3.3.4.1.9 | ColumnifJnxInPolMHigh1SecRate | read-only | current | Logical Interface Policer Input Medium High 1 Sec Rate |
| 1.3.6.1.4.1.2636.3.3.4.1.10 | ColumnifJnxInPolHighOctets | read-only | current | Logical Interface Policer Input High Bytes |
| 1.3.6.1.4.1.2636.3.3.4.1.11 | ColumnifJnxInPolHighPkts | read-only | current | Logical Interface Policer Input High Pkts |
| 1.3.6.1.4.1.2636.3.3.4.1.12 | ColumnifJnxInPolHigh1SecRate | read-only | current | Logical Interface Policer Input High 1 Sec Rate |
| 1.3.6.1.4.1.2636.3.3.4.1.13 | ColumnifJnxInPolDropOctets | read-only | current | Logical Interface Policer Input Drop Bytes |
| 1.3.6.1.4.1.2636.3.3.4.1.14 | ColumnifJnxInPolDropPkts | read-only | current | Logical Interface Policer Input Drop Pkts |
| 1.3.6.1.4.1.2636.3.3.4.1.15 | ColumnifJnxInPolDrop1SecRate | read-only | current | Logical Interface Policer Input Drop 1 Sec Rate |
| 1.3.6.1.4.1.2636.3.3.4.1.16 | ColumnifJnxOutPolLowOctets | read-only | current | Logical Interface Policer Output Low Bytes |
| 1.3.6.1.4.1.2636.3.3.4.1.17 | ColumnifJnxOutPolLowPkts | read-only | current | Logical Interface Policer Output Low Pkts |
| 1.3.6.1.4.1.2636.3.3.4.1.18 | ColumnifJnxOutPolLow1SecRate | read-only | current | Logical Interface Policer Output Low 1 Sec Rate |
| 1.3.6.1.4.1.2636.3.3.4.1.19 | ColumnifJnxOutPolMLowOctets | read-only | current | Logical Interface Policer Output Medium Low Bytes |
| 1.3.6.1.4.1.2636.3.3.4.1.20 | ColumnifJnxOutPolMLowPkts | read-only | current | Logical Interface Policer Input Medium Low Pkts |
| 1.3.6.1.4.1.2636.3.3.4.1.21 | ColumnifJnxOutPolMLow1SecRate | read-only | current | Logical Interface Policer Output Medium Low 1 Sec Rate |
| 1.3.6.1.4.1.2636.3.3.4.1.22 | ColumnifJnxOutPolMHighOctets | read-only | current | Logical Interface Policer Output Medium High Bytes |
| 1.3.6.1.4.1.2636.3.3.4.1.23 | ColumnifJnxOutPolMHighPkts | read-only | current | Logical Interface Policer Output Medium High Pkts |
| 1.3.6.1.4.1.2636.3.3.4.1.24 | ColumnifJnxOutPolMHigh1SecRate | read-only | current | Logical Interface Policer Output Medium High 1 Sec Rate |
| 1.3.6.1.4.1.2636.3.3.4.1.25 | ColumnifJnxOutPolHighOctets | read-only | current | Logical Interface Policer Output High Bytes |
| 1.3.6.1.4.1.2636.3.3.4.1.26 | ColumnifJnxOutPolHighPkts | read-only | current | Logical Interface Policer Output High Pkts |
| 1.3.6.1.4.1.2636.3.3.4.1.27 | ColumnifJnxOutPolHigh1SecRate | read-only | current | Logical Interface Policer Output High 1 Sec Rate |
| 1.3.6.1.4.1.2636.3.3.4.1.28 | ColumnifJnxOutPolDropOctets | read-only | current | Logical Interface Policer Output Drop Bytes |
| 1.3.6.1.4.1.2636.3.3.4.1.29 | ColumnifJnxOutPolDropPkts | read-only | current | Logical Interface Policer Output Drop Pkts |
| 1.3.6.1.4.1.2636.3.3.4.1.30 | ColumnifJnxOutPolDrop1SecRate | read-only | current | Logical Interface Policer Output Drop 1 Sec Rate |