JUNIPER-TWAMP-MIB
70 objects
This mib provides data associated with the TWAMP feature
Imported Objects
| DISMAN-PING-MIB | pingCtlOwnerIndex pingCtlTestName pingProbeHistoryIndex |
| HCNUM-TC | CounterBasedGauge64 |
| JUNIPER-SMI | jnxTwampMibRoot jnxTwampNotificationPrefix |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | -- RFC2578 NOTIFICATION-TYPE Integer32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.77.1 | IdentityjnxTwampMib | This mib provides data associated with the TWAMP feature | ||
| 1.3.6.1.4.1.2636.3.77.1.1 | IdentityjnxTwampClientNode | current | The node contains all the TWAMP client related tables. | |
| 1.3.6.1.4.1.2636.3.77.1.1.1 | TablejnxTwampClientResultsSampleTable | not-accessible | current | This table provides measurements from the latest individual TWAMP probe samples. Within each sample, the specific measurement type is identified by jnxTwampCli… |
| 1.3.6.1.4.1.2636.3.77.1.1.1.1 | RowjnxTwampClientResultsSampleEntry | not-accessible | current | Each entry provides a specific measurement type for a single probe. |
| 1.3.6.1.4.1.2636.3.77.1.1.1.1.1 | ColumnjnxTwampResSampleType | not-accessible | current | This object identifies the specific measurement type returned by jnxTwampResSampleValue. |
| 1.3.6.1.4.1.2636.3.77.1.1.1.1.2 | ColumnjnxTwampResSampleValue | read-only | current | This object returns the measurement identified by the corresponding jnxTwampResSampleType. |
| 1.3.6.1.4.1.2636.3.77.1.1.1.1.3 | ColumnjnxTwampResSampleDate | read-only | current | This object provides the date and time of when this measurement was obtained. |
| 1.3.6.1.4.1.2636.3.77.1.1.2 | TablejnxTwampClientResultsSummaryTable | not-accessible | current | This table provides a summary of the results for a specific TWAMP entry (identified by pingCtlOwnerIndex/pingCtlTestName). The scope of the summary is identifi… |
| 1.3.6.1.4.1.2636.3.77.1.1.2.1 | RowjnxTwampClientResultsSummaryEntry | not-accessible | current | Each entry in the table provides a summary of the TWAMP results over a single collection of probes(test session). For each TWAMP entry, there are several colle… |
| 1.3.6.1.4.1.2636.3.77.1.1.2.1.1 | ColumnjnxTwampResSumCollection | not-accessible | current | This object identifes the collection of probes over which the summary data represented by the other objects in this table applies. Note, if a collection type i… |
| 1.3.6.1.4.1.2636.3.77.1.1.2.1.2 | ColumnjnxTwampResSumSent | read-only | current | This object provides the number of probes sent within the collection identified by jnxTwampResSumCollection. |
| 1.3.6.1.4.1.2636.3.77.1.1.2.1.3 | ColumnjnxTwampResSumReceived | read-only | current | This object provides the number of probes received within the collection identified by jnxTwampResSumCollection. |
| 1.3.6.1.4.1.2636.3.77.1.1.2.1.4 | ColumnjnxTwampResSumPercentLost | read-only | current | This object provides the percentage of probes lost within the collection identified by jnxTwampResSumCollection. |
| 1.3.6.1.4.1.2636.3.77.1.1.2.1.5 | ColumnjnxTwampResSumDate | read-only | current | This object provides the date and time of when the most recent probe within the collection identified by jnxTwampResSumCollection was completed. |
| 1.3.6.1.4.1.2636.3.77.1.1.3 | TablejnxTwampClientResultsCalculatedTable | not-accessible | current | This table provides a set of calculated values for each TWAMP entry, for each collection of probes maintained within that entry, and for each supported measure… |
| 1.3.6.1.4.1.2636.3.77.1.1.3.1 | RowjnxTwampClientResultsCalculatedEntry | not-accessible | current | |
| 1.3.6.1.4.1.2636.3.77.1.1.3.1.1 | ColumnjnxTwampResCalcSet | not-accessible | current | This object identifies the measurement set upon which the calculations returned by the other objects in this table are based. |
| 1.3.6.1.4.1.2636.3.77.1.1.3.1.2 | ColumnjnxTwampResCalcSamples | read-only | current | The number of samples used in this calculations. |
| 1.3.6.1.4.1.2636.3.77.1.1.3.1.3 | ColumnjnxTwampResCalcMin | read-only | current | The minimum of all the samples in the collection and measurement set associated with this row. Values are provided in units of microseconds. |
| 1.3.6.1.4.1.2636.3.77.1.1.3.1.4 | ColumnjnxTwampResCalcMax | read-only | current | The maximum of all the samples in the collection and measurement set associated with this row. Values are provided in units of microseconds. |
| 1.3.6.1.4.1.2636.3.77.1.1.3.1.5 | ColumnjnxTwampResCalcAverage | read-only | current | The average of all the samples in the collection and measurement set associated with this row. Values are provided in units of microseconds. |
| 1.3.6.1.4.1.2636.3.77.1.1.3.1.6 | ColumnjnxTwampResCalcPkToPk | read-only | current | The difference between the minimum and maximum of all the samples in the collection and measurement set associated with this row. Values are provided in units … |
| 1.3.6.1.4.1.2636.3.77.1.1.3.1.7 | ColumnjnxTwampResCalcStdDev | read-only | current | The standard deviation calculated over all the samples in the collection and measurement set associated with this row. Values are provided in units of microsec… |
| 1.3.6.1.4.1.2636.3.77.1.1.3.1.8 | ColumnjnxTwampResCalcSum | read-only | current | The sum of all the samples in the collection and measurement set associated with this row. Values are provided in units of microseconds. |
| 1.3.6.1.4.1.2636.3.77.1.1.4 | TablejnxTwampClientHistorySampleTable | not-accessible | current | This table provides measurements for individual TWAMP probe samples(test sessions). In addition to the last completed sample, a configurable number of the most… |
| 1.3.6.1.4.1.2636.3.77.1.1.4.1 | RowjnxTwampClientHistorySampleEntry | not-accessible | current | |
| 1.3.6.1.4.1.2636.3.77.1.1.4.1.1 | ColumnjnxTwampHistSampleType | not-accessible | current | This object identifies the specific measurement type returned by jnxTwampHistSampleValue. |
| 1.3.6.1.4.1.2636.3.77.1.1.4.1.2 | ColumnjnxTwampHistSampleValue | read-only | current | This object returns the measurement identified by the corresponding jnxTwampHistSampleType. |
| 1.3.6.1.4.1.2636.3.77.1.1.5 | TablejnxTwampClientHistorySummaryTable | not-accessible | current | This table provides historical summary data for each collection of probes(test session) within each TWAMP Control Entry, similar to the jnxTwampClientResultsSu… |
| 1.3.6.1.4.1.2636.3.77.1.1.5.1 | RowjnxTwampClientHistorySummaryEntry | not-accessible | current | |
| 1.3.6.1.4.1.2636.3.77.1.1.5.1.1 | ColumnjnxTwampHistSumCollection | not-accessible | current | Identifies the collection of probes whose results are summarized by this row. At this time, historical summaries are available only for the current test (curre… |
| 1.3.6.1.4.1.2636.3.77.1.1.5.1.2 | ColumnjnxTwampHistSumSent | read-only | current | This object provides the number of probes sent within the collection identified by jnxTwampHistSumCollection. |
| 1.3.6.1.4.1.2636.3.77.1.1.5.1.3 | ColumnjnxTwampHistSumReceived | read-only | current | This object provides the number of probes received within the collection identified by jnxTwampHistSumCollection. |
| 1.3.6.1.4.1.2636.3.77.1.1.5.1.4 | ColumnjnxTwampHistSumPercentLost | read-only | current | This object provides the percentage of probes lost within the collection identified by jnxTwampHistSumCollection. |
| 1.3.6.1.4.1.2636.3.77.1.1.6 | TablejnxTwampClientHistoryCalculatedTable | not-accessible | current | This table provides a set of calculated values for each TWAMP control entry, for each test session maintained within that entry, and for each supported calcula… |
| 1.3.6.1.4.1.2636.3.77.1.1.6.1 | RowjnxTwampClientHistoryCalculatedEntry | not-accessible | current | |
| 1.3.6.1.4.1.2636.3.77.1.1.6.1.1 | ColumnjnxTwampHistCalcSet | not-accessible | current | This object identifies the measurement set upon which the calculations returned by the other objects in this table are based. |
| 1.3.6.1.4.1.2636.3.77.1.1.6.1.2 | ColumnjnxTwampHistCalcSamples | read-only | current | The number of samples used in this calculations. |
| 1.3.6.1.4.1.2636.3.77.1.1.6.1.3 | ColumnjnxTwampHistCalcMin | read-only | current | The minimum of all the samples in the collection and measurement set associated with this row. Values are provided in units of microseconds. |
| 1.3.6.1.4.1.2636.3.77.1.1.6.1.4 | ColumnjnxTwampHistCalcMax | read-only | current | The maximum of all the samples in the collection and measurement set associated with this row. Values are provided in units of microseconds. |
| 1.3.6.1.4.1.2636.3.77.1.1.6.1.5 | ColumnjnxTwampHistCalcAverage | read-only | current | The average of all the samples in the collection and measurement set associated with this row. Values are provided in units of microseconds. |
| 1.3.6.1.4.1.2636.3.77.1.1.6.1.6 | ColumnjnxTwampHistCalcPkToPk | read-only | current | The difference between the minimum and maximum of all the samples in the collection and measurement set associated with this row. Values are provided in units … |
| 1.3.6.1.4.1.2636.3.77.1.1.6.1.7 | ColumnjnxTwampHistCalcStdDev | read-only | current | The standard deviation calculated over all the samples in the collection and measurement set associated with this row. Values are provided in units of microsec… |
| 1.3.6.1.4.1.2636.3.77.1.1.6.1.8 | ColumnjnxTwampHistCalcSum | read-only | current | The sum of all the samples in the collection and measurement set associated with this row. Values are provided in units of microseconds. |
| 1.3.6.1.4.1.2636.3.77.1.1.7 | TablejnxTwampClientControlConnectionTable | not-accessible | current | Table of Client Sessions. |
| 1.3.6.1.4.1.2636.3.77.1.1.7.1 | RowjnxTwampClientCCEntry | not-accessible | current | TWAMP Client Session characteristics. |
| 1.3.6.1.4.1.2636.3.77.1.1.7.1.1 | ColumnjnxTwampClientControlConnectionID | not-accessible | current | TWAMP Client control session ID. |
| 1.3.6.1.4.1.2636.3.77.1.1.7.1.2 | ColumnjnxTwampClientCCName | read-only | current | Text string containing the session's unique name. |
| 1.3.6.1.4.1.2636.3.77.1.1.7.1.3 | ColumnjnxTwampClientCCStatus | read-only | current | If the control session is active, this would return 1. If the control session does not have any currently running test sessions and is not active, this would r… |
| 1.3.6.1.4.1.2636.3.77.1.1.7.1.4 | ColumnjnxTwampClientServerAddress | read-only | current | Server IP address for TWAMP TCP control session. |
| 1.3.6.1.4.1.2636.3.77.1.1.7.1.5 | ColumnjnxTwampClientServerPort | read-only | current | Destination port for TWAMP TCP control connection. |
| 1.3.6.1.4.1.2636.3.77.1.1.7.1.6 | ColumnjnxTwampClientTSConfiguredCount | read-only | current | Number test sessions configured. |
| 1.3.6.1.4.1.2636.3.77.1.1.7.1.7 | ColumnjnxTwampClientTSActiveCount | read-only | current | Number of test sessions currently running. |
| 1.3.6.1.4.1.2636.3.77.1.1.7.1.8 | ColumnjnxTwampClientAuthMode | read-only | current | Authenticated mode for the control session. |
| 1.3.6.1.4.1.2636.3.77.1.1.8 | TablejnxTwampClientTestSessionsTable | not-accessible | current | Table of Test Sessions. |
| 1.3.6.1.4.1.2636.3.77.1.1.8.1 | RowjnxTwampClientTSEntry | not-accessible | current | TWAMP Test Session characteristics. |
| 1.3.6.1.4.1.2636.3.77.1.1.8.1.1 | ColumnjnxTwampClientTestSessionID | not-accessible | current | Test Session ID. |
| 1.3.6.1.4.1.2636.3.77.1.1.8.1.2 | ColumnjnxTwampClientTSName | read-only | current | TWAMP Test Session Name. |
| 1.3.6.1.4.1.2636.3.77.1.1.8.1.3 | ColumnjnxTwampClientTSStatus | read-only | current | TWAMP Test Session status. |
| 1.3.6.1.4.1.2636.3.77.1.1.8.1.4 | ColumnjnxTwampClientTSSenderAddress | read-only | current | Twamp Test Sender Address. |
| 1.3.6.1.4.1.2636.3.77.1.1.8.1.5 | ColumnjnxTwampClientTSSenderPort | read-only | current | TWAMP Test Session Sender Port. |
| 1.3.6.1.4.1.2636.3.77.1.1.8.1.6 | ColumnjnxTwampClientTSReflectorAddress | read-only | current | TWAMP Test Session Reflector Address. |
| 1.3.6.1.4.1.2636.3.77.1.1.8.1.7 | ColumnjnxTwampClientTSReflectorPort | read-only | current | TWAMP Test Session Reflector Port. |
| 1.3.6.1.4.1.2636.3.77.1.2 | ScalarjnxTwampRpmIdentity | read-only | current | This object is added to be binded to the traps. This object simply identifies if its an RPM type of test or a TWAMP type of test. |
| 1.3.6.1.4.1.2636.4.27.1 | NodetwampNotifications | |||
| 1.3.6.1.4.1.2636.4.27.1.1 | NotificationjnxTwampClientControlConnectionClosed | current | This trap is generated when all the test iterations configured under the control connection finish running and control connection is closed. | |
| 1.3.6.1.4.1.2636.4.27.1.2 | NotificationjnxTwampClientTestIterationFinished | current | This trap is generated when one test iteration is finished for all the test sessions configured under the control connection. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| JnxTwampClientCollectionType | INTEGER { currentTest (1), lastCompletedTest (2), movingAverage (3), allTests (4) } | current | Each TWAMP entry can maintain several collections of probes and provide separate calculations over each collection. The types of collections include: currentTest lastCompletedTest movingAverage allTests reset). Objects … |
| JnxTwampClientMeasurementSet | INTEGER { roundTripTime (1), posRttJitter (2), negRttJitter (3), egress (4), posEgressJitter (5), negEgressJitter (6), ingress (7), posIngressJitter (8), negIngressJitter (9) } jnxTwampClientNode OBJECT-IDENTITY STATUS current DESCRIPTION "The node contains all the TWAMP client related tables." ::= {jnxTwampMib 1} | current | Over each collection of probes, TWAMP calculates statistics for several sets of measurements. These sets include the following: roundTripTime posRttJitter measurements negRttJitter measurements egress one-way delays pos… |
| JnxTwampClientMeasurementType | INTEGER { roundTripTime (1), rttJitter (2), rttInterarrivalJitter (3), egress (4), egressJitter (5), egressInterarrivalJitter (6), ingress (7), ingressJitter (8), ingressInterarrivalJitter (9) } | current | For each individual probe, several different measurements can be made. These include the following (all measurements are provided in units of microseconds): roundTripTime a probe and the arrival of its response. rttJitt… |