JWAC-MIB
91 objects
The structure of JWAC management for the proprietary enterprise.
Imported Objects
| DLINK-ID-REC-MIB | dlink-common-mgmt |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.39 | IdentityswJWACMIB | The structure of JWAC management for the proprietary enterprise. | ||
| 1.3.6.1.4.1.171.12.39.1 | NodeswJWACCtrl | |||
| 1.3.6.1.4.1.171.12.39.1.1 | ScalarswJWACState | read-write | current | This object enables/disables the JWAC function. JWAC and WAC are mutually exclusive functions. That is, they can not be enabled at the same time. Using the JWA… |
| 1.3.6.1.4.1.171.12.39.1.2 | ScalarswJWACRedirectState | read-write | current | This object enables/disables the JWAC redirect function. When the redirect quarantine_server is enabled, the unauthenticated host will be redirected to the qua… |
| 1.3.6.1.4.1.171.12.39.1.3 | ScalarswJWACForcibleLogoutState | read-write | current | This object enables/disables the JWAC forcible_logout function. When forcible_logout is enabled, a PING packet from an authenticated host to the JWAC Switch wi… |
| 1.3.6.1.4.1.171.12.39.1.4 | ScalarswJWACUDPFilteringState | read-write | current | This object enables/disables the JWAC udp_filtering function. When udp_filtering is enabled, all UDP and ICMP packets except DHCP and DNS packets from unauthen… |
| 1.3.6.1.4.1.171.12.39.1.5 | ScalarswJWACQuarantineServerMonitorState | read-write | current | This object enables/disables the JWAC Quarantine Server monitor function. When enabled, the JWAC Switch will monitor the Quarantine Server to ensure the server… |
| 1.3.6.1.4.1.171.12.39.1.6 | ScalarswJWACQuarantineServerErrorTimeOut | read-write | current | Used to set the Quarantine Server error timeout. When the Quarantine Server monitor is enabled, the JWAC Switch will periodically check if the Quarantine works… |
| 1.3.6.1.4.1.171.12.39.1.7 | ScalarswJWACRedirectDestination | read-write | current | Specifies the destination before an unauthenticated host is redirected to the Quarantine Server or JWAC login web page. |
| 1.3.6.1.4.1.171.12.39.1.8 | ScalarswJWACRedirectDelayTime | read-write | current | Specifies the delay time before an unauthenticated host is redirected to the Quarantine Server or JWAC login web page. The unit of delay_time is seconds. 0 mea… |
| 1.3.6.1.4.1.171.12.39.1.9 | ScalarswJWACVirtualIpAddr | read-write | current | Specifies the JWAC virtual IP address which is used to accept authentication requests from an unauthenticated host. The virtual IP of JWAC is used to accept au… |
| 1.3.6.1.4.1.171.12.39.1.10 | ScalarswJWACQuarantineServerURL | read-write | current | Specifies the JWAC Quarantine Server URL. If the redirect is enabled and the redirect destination is the Quarantine Server, when an unauthenticated host sends … |
| 1.3.6.1.4.1.171.12.39.1.11 | ScalarswJWACSwitchHttpPortNumber | read-write | current | Specifies the TCP port which the JWAC Switch listens to and uses to finish the authenticating process. |
| 1.3.6.1.4.1.171.12.39.1.12 | ScalarswJWACSwitchHttpProtocol | read-write | current | Specifies the protocol JWAC will run on this TCP port. |
| 1.3.6.1.4.1.171.12.39.1.13 | ScalarswJWACRadiusProtocol | read-write | current | Specifies the RADIUS protocol used by JWAC to complete a RADIUS authentication. |
| 1.3.6.1.4.1.171.12.39.1.14 | TableswJWACUpdateServerTable | not-accessible | obsolete | A table that contains the JWAC Update Server information. |
| 1.3.6.1.4.1.171.12.39.1.14.1 | RowswJWACUpdateServerEntry | not-accessible | obsolete | A list of JWAC Update Server information. |
| 1.3.6.1.4.1.171.12.39.1.14.1.1 | ColumnswJWACUpdateServerIpAddr | read-only | obsolete | Specifies the IP address. |
| 1.3.6.1.4.1.171.12.39.1.14.1.2 | ColumnswJWACUpdateServerMask | read-only | obsolete | Specifies the IP net mask. |
| 1.3.6.1.4.1.171.12.39.1.14.1.3 | ColumnswJWACUpdateServerStatus | read-create | obsolete | The status of this entry. |
| 1.3.6.1.4.1.171.12.39.1.15 | ScalarswJWACAuthenticatePage | read-write | current | This lets an administrator decide which authentication page to use. japanese: Choose the Japanese page; english: Choose the English page. |
| 1.3.6.1.4.1.171.12.39.1.16 | ScalarswJWACAuthFailOverState | read-write | current | This object enables/disables the web-based authentication auth_failover status of the device. When the authentication failover is enabled, if the RADIUS server… |
| 1.3.6.1.4.1.171.12.39.1.17 | ScalarswJWACRadiusAuthorizeState | read-write | current | Used to enable or disable the acceptance of an authorized configuration. When the authorization is enabled for the JWAC RADIUS, the authorized data assigned by… |
| 1.3.6.1.4.1.171.12.39.1.18 | ScalarswJWACLocalAuthorizeState | read-write | current | Used to enable or disable the acceptance of an authorized configuration. When the authorization is enabled for the JWAC local, the authorized data assigned by … |
| 1.3.6.1.4.1.171.12.39.1.19 | TableswJWACUpdateSVRTable | not-accessible | current | A table that contains JWAC Update Server information. |
| 1.3.6.1.4.1.171.12.39.1.19.1 | RowswJWACUpdateSVREntry | not-accessible | current | A list of JWAC Update Server information. |
| 1.3.6.1.4.1.171.12.39.1.19.1.1 | ColumnswJWACUpdateSVRIpAddr | read-only | current | Specifies the IP address. |
| 1.3.6.1.4.1.171.12.39.1.19.1.2 | ColumnswJWACUpdateSVRMask | read-only | current | Specifies the IP net mask. |
| 1.3.6.1.4.1.171.12.39.1.19.1.3 | ColumnswJWACUpdateSVRProtocol | read-only | current | Specifies the protocol. |
| 1.3.6.1.4.1.171.12.39.1.19.1.4 | ColumnswJWACUpdateSVRPort | read-only | current | Specifies the port, 0 denotes all ports. |
| 1.3.6.1.4.1.171.12.39.1.19.1.5 | ColumnswJWACUpdateSVRStatus | read-create | current | The status of this entry. |
| 1.3.6.1.4.1.171.12.39.1.19.1.6 | ColumnswJWACUpdateSVRState | read-only | current | Specifies the update server ACL state. |
| 1.3.6.1.4.1.171.12.39.1.20 | ScalarswJWACVirtualIpURL | read-write | current | Used to set the URL for virtual IP |
| 1.3.6.1.4.1.171.12.39.2 | NodeswJWACInfo | |||
| 1.3.6.1.4.1.171.12.39.3 | NodeswJWACPortMgmt | |||
| 1.3.6.1.4.1.171.12.39.3.1 | TableswJWACPortTable | not-accessible | current | A table that contains JWAC port information. |
| 1.3.6.1.4.1.171.12.39.3.1.1 | RowswJWACPortEntry | not-accessible | current | A list containing JWAC port information. |
| 1.3.6.1.4.1.171.12.39.3.1.1.1 | ColumnswJWACPortIndex | read-only | current | Specifies the JWAC port number. |
| 1.3.6.1.4.1.171.12.39.3.1.1.2 | ColumnswJWACPortState | read-write | current | Specifies the JWAC port state. |
| 1.3.6.1.4.1.171.12.39.3.1.1.3 | ColumnswJWACPortMaxAuthHost | read-write | current | Specifies the maximum number of host process authentication attempts allowed on each port at the same time. The value range is (0..N), the value of N is projec… |
| 1.3.6.1.4.1.171.12.39.3.1.1.4 | ColumnswJWACPortAgeingTime | read-write | current | Specifies the time period during which an authenticated host will remain in the authenticated state. 0 indicates the authenticated host will never age out on t… |
| 1.3.6.1.4.1.171.12.39.3.1.1.5 | ColumnswJWACPortIdleTime | read-write | current | Specifies the idle_time. If there is no traffic during idle_time, the host will be moved back to the unauthenticated state. 0 indicates the idle state of the a… |
| 1.3.6.1.4.1.171.12.39.3.1.1.6 | ColumnswJWACPortBlockTime | read-write | current | Specifies the block_time. If a host fails to pass authentication, it will be blocked for a period specified by the block_time. |
| 1.3.6.1.4.1.171.12.39.3.1.1.7 | ColumnswJWACPortAuthMode | read-write | current | Specifies the authentication mode on the special port. The default mode is host based. |
| 1.3.6.1.4.1.171.12.39.4 | NodeswJWACMgmt | |||
| 1.3.6.1.4.1.171.12.39.4.1 | TableswJWACHostTable | not-accessible | current | A table that contains JWAC client host information. |
| 1.3.6.1.4.1.171.12.39.4.1.1 | RowswJWACHostEntry | not-accessible | current | A list containing JWAC client host information. |
| 1.3.6.1.4.1.171.12.39.4.1.1.1 | ColumnswJWACHostPort | read-only | current | Specifies the JWAC host port number. |
| 1.3.6.1.4.1.171.12.39.4.1.1.2 | ColumnswJWACHostAuthStatus | read-only | current | Specifies the JWAC host authentication state. |
| 1.3.6.1.4.1.171.12.39.4.1.1.3 | ColumnswJWACHostMACAddr | read-only | current | Specifies the JWAC host MAC address. |
| 1.3.6.1.4.1.171.12.39.4.1.1.4 | ColumnswJWACHostVID | read-only | current | Specifies the JWAC host VID. |
| 1.3.6.1.4.1.171.12.39.4.1.1.5 | ColumnswJWACHostRemainAgeTime | read-only | current | Specifies the remaining JWAC host agetime. 0 indicates the authenticated host on the port will never age out. |
| 1.3.6.1.4.1.171.12.39.4.1.1.6 | ColumnswJWACHostIdleTime | read-only | current | Specifies the JWAC host idle time. 0 indicates the idle state of the authenticated host on the port will never be checked. |
| 1.3.6.1.4.1.171.12.39.4.1.1.7 | ColumnswJWACHostBlockTime | read-only | current | Specifies the JWAC host block time. |
| 1.3.6.1.4.1.171.12.39.4.1.1.8 | ColumnswJWACHostStatus | read-write | current | Specifies the status of the JWAC host. Setting delete (2) will delete this JWAC host entry. |
| 1.3.6.1.4.1.171.12.39.4.1.1.9 | ColumnswJWACHostPriority | read-only | current | Specifies the JWAC host priority assigned when passing authentication. -1 indicates the host has no priority. |
| 1.3.6.1.4.1.171.12.39.4.1.1.10 | ColumnswJWACHostUserName | read-only | current | Specifies the user name who started the authentication process. |
| 1.3.6.1.4.1.171.12.39.4.1.1.11 | ColumnswJWACHostIP | read-only | current | Specifies the IP address of the JWAC host, which started the authentication process. |
| 1.3.6.1.4.1.171.12.39.4.2 | TableswJWACPageElementTable | not-accessible | current | A table that contains JWAC authentication page information. |
| 1.3.6.1.4.1.171.12.39.4.2.1 | RowswJWACPageElementEntry | not-accessible | current | A list containing JWAC authenticate page information. This allows an administrator to customize the authenticate page. |
| 1.3.6.1.4.1.171.12.39.4.2.1.1 | ColumnswJWACPageElementPage | read-only | current | Specifies the JWAC authenticate page. |
| 1.3.6.1.4.1.171.12.39.4.2.1.2 | ColumnswJWACPageElementPageTitle | read-write | current | Specifies the JWAC page title of the authenticate page. |
| 1.3.6.1.4.1.171.12.39.4.2.1.3 | ColumnswJWACPageElementLoginWindowTitle | read-write | current | Specifies the JWAC login window title mapping of the authenticate page. |
| 1.3.6.1.4.1.171.12.39.4.2.1.4 | ColumnswJWACPageElementUserName | read-write | current | Specifies the JWAC user name mapping of the authenticate page. |
| 1.3.6.1.4.1.171.12.39.4.2.1.5 | ColumnswJWACPageElementPassWord | read-write | current | Specifies the remaining JWAC password mapping of the authenticate page. |
| 1.3.6.1.4.1.171.12.39.4.2.1.6 | ColumnswJWACPageElementLogoutWindowTitle | read-write | current | Specifies the JWAC logout window title mapping of the authenticate page. |
| 1.3.6.1.4.1.171.12.39.4.2.1.7 | ColumnswJWACPageElementNotificationLine1 | read-write | current | Used to set the notification information of line 1 in web page after successful authentication. |
| 1.3.6.1.4.1.171.12.39.4.2.1.8 | ColumnswJWACPageElementNotificationLine2 | read-write | current | Used to set the notification information of line 2 in web page after successful authentication. |
| 1.3.6.1.4.1.171.12.39.4.2.1.9 | ColumnswJWACPageElementNotificationLine3 | read-write | current | Used to set the notification information of line 3 in web page after successful authentication. |
| 1.3.6.1.4.1.171.12.39.4.2.1.10 | ColumnswJWACPageElementNotificationLine4 | read-write | current | Used to set the notification information of line 4 in web page after successful authentication. |
| 1.3.6.1.4.1.171.12.39.4.2.1.11 | ColumnswJWACPageElementNotificationLine5 | read-write | current | Used to set the notification information of line 5 in web page after successful authentication. |
| 1.3.6.1.4.1.171.12.39.4.3 | TableswJWACWebAuthUserTable | not-accessible | current | A table that contains web-based authentication account info. |
| 1.3.6.1.4.1.171.12.39.4.3.1 | RowswJWACWebAuthUserEntry | not-accessible | current | A list that contains web-based authentication account info. |
| 1.3.6.1.4.1.171.12.39.4.3.1.1 | ColumnswJWACWebAuthUserNameIndex | read-only | current | This object indicates the username (maximum number of characters is 15). |
| 1.3.6.1.4.1.171.12.39.4.3.1.2 | ColumnswJWACWebAuthUserPWD | read-create | current | This object indicates the password (maximum number of characters is 15) for this user account. It is write-only. |
| 1.3.6.1.4.1.171.12.39.4.3.1.3 | ColumnswJWACWebAuthUserVID | read-create | current | This object indicates the VID for this user account. |
| 1.3.6.1.4.1.171.12.39.4.3.1.4 | ColumnswJWACWebAuthUserStatus | read-create | current | This object manages this entry. |
| 1.3.6.1.4.1.171.12.39.4.4 | TableswJWACAuthStateTable | not-accessible | current | This table contains JWAC client host information. |
| 1.3.6.1.4.1.171.12.39.4.4.1 | RowswJWACAuthStateEntry | not-accessible | current | This list contains JWAC client host information. |
| 1.3.6.1.4.1.171.12.39.4.4.1.1 | ColumnswJWACAuthStatePort | not-accessible | current | Specifies the JWAC host port number. |
| 1.3.6.1.4.1.171.12.39.4.4.1.2 | ColumnswJWACAuthStateOriginalVid | not-accessible | current | Specifies the JWAC host original receive VLAN-ID. |
| 1.3.6.1.4.1.171.12.39.4.4.1.3 | ColumnswJWACAuthStateMACAddr | not-accessible | current | Specifies the JWAC host MAC address. |
| 1.3.6.1.4.1.171.12.39.4.4.1.5 | ColumnswJWACAuthStateAuthStatus | read-only | current | Specifies the JWAC host authentication state. |
| 1.3.6.1.4.1.171.12.39.4.4.1.7 | ColumnswJWACAuthStateAssignVid | read-only | current | Specifies the JWAC host assign VID. |
| 1.3.6.1.4.1.171.12.39.4.4.1.8 | ColumnswJWACAuthStateAssignPriority | read-only | current | Specifies the JWAC host priority assigned when pass authentication. -1 indicates the host has no priority assigned. |
| 1.3.6.1.4.1.171.12.39.4.4.1.12 | ColumnswJWACAuthStateRemainTime | read-only | current | Specifies the remaining JWAC host aging time/ block time. When host's authentication state is 'authenticated' in swJWACAuthStateAuthStatus, this object indicat… |
| 1.3.6.1.4.1.171.12.39.4.4.1.14 | ColumnswJWACAuthStateIdleTime | read-only | current | Specifies the JWAC host idle time in seconds. 0 indicates the idle state of the authenticated host on the port will never be checked. |
| 1.3.6.1.4.1.171.12.39.4.4.1.18 | ColumnswJWACAuthStateUserName | read-only | current | Specifies the user name who starts the authentication process. |
| 1.3.6.1.4.1.171.12.39.4.4.1.20 | ColumnswJWACAuthStateIP | read-only | current | Specifies the IP address of the JWAC host, which starts the authentication process. |
| 1.3.6.1.4.1.171.12.39.4.4.1.30 | ColumnswJWACAuthStateDelAction | read-write | current | Used to delete the specified authentication entry. Setting delete(2) will delete this JWAC host entry. |
| 1.3.6.1.4.1.171.12.39.5 | NodeswJWACNotify |