Jetnet4508V2
561 objects
The MIB module for Korenix Industrial Web-Managed Ethernet Rail Switch
Imported Objects
| Q-BRIDGE-MIB | PortList |
| RFC1155-SMI | internet |
| SNMPv2-TC | DisplayString MacAddress RowStatus TimeInterval |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.24062 | Nodekorenix | |||
| 1.3.6.1.4.1.24062.1 | Identitycontact | The MIB module for Korenix Industrial Web-Managed Ethernet Rail Switch | ||
| 1.3.6.1.4.1.24062.2 | Nodeproducts | |||
| 1.3.6.1.4.1.24062.2.2 | NodemanagedFESwitch | |||
| 1.3.6.1.4.1.24062.2.2.17 | Nodejetnet4508V2 | |||
| 1.3.6.1.4.1.24062.2.2.17.1 | NodesystemInfo | |||
| 1.3.6.1.4.1.24062.2.2.17.1.1 | ScalarsystemName | read-only | current | An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. |
| 1.3.6.1.4.1.24062.2.2.17.1.2 | ScalarsystemLocation | read-only | current | The physical location of this node (e.g., telephone closet, 3rd floor'). |
| 1.3.6.1.4.1.24062.2.2.17.1.3 | ScalarsystemContact | read-only | current | The textual identification of the contact person for this managed node, together with information on how to contact this person. |
| 1.3.6.1.4.1.24062.2.2.17.1.4 | ScalarsystemDescr | read-only | current | A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-syste… |
| 1.3.6.1.4.1.24062.2.2.17.1.5 | ScalarsystemFwVer | read-only | current | Firmware version of the device. |
| 1.3.6.1.4.1.24062.2.2.17.1.6 | ScalarsystemMacAddress | read-only | current | The MAC address of this device. An Media Access Control address (MAC address) is a unique identifier attached to most network adapters (NICs). It is a number t… |
| 1.3.6.1.4.1.24062.2.2.17.1.7 | ScalarsystemProductName | read-only | current | |
| 1.3.6.1.4.1.24062.2.2.17.1.8 | ScalarsystemSerialNumber | read-only | current | |
| 1.3.6.1.4.1.24062.2.2.17.1.9 | ScalarsystemManufacturingDate | read-only | current | |
| 1.3.6.1.4.1.24062.2.2.17.2 | NodebasicSetting | |||
| 1.3.6.1.4.1.24062.2.2.17.2.1 | NodeswitchSetting | |||
| 1.3.6.1.4.1.24062.2.2.17.2.1.1 | ScalarswitchSettingSystemName | read-write | current | An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. |
| 1.3.6.1.4.1.24062.2.2.17.2.1.2 | ScalarswitchSettingSystemLocation | read-write | current | The physical location of this node (e.g., telephone closet, 3rd floor'). |
| 1.3.6.1.4.1.24062.2.2.17.2.1.3 | ScalarswitchSettingSystemContact | read-write | current | The textual identification of the contact person for this managed node, together with information on how to contact this person. |
| 1.3.6.1.4.1.24062.2.2.17.2.2 | NodeadminPassword | |||
| 1.3.6.1.4.1.24062.2.2.17.2.2.1 | ScalaradminPasswordUserName | read-write | current | The name(ID) of security manager. |
| 1.3.6.1.4.1.24062.2.2.17.2.2.2 | ScalaradminPasswordPassword | write-only | current | The password of security manager. This object can't be read. it's write-only. |
| 1.3.6.1.4.1.24062.2.2.17.2.3 | NodeipConfiguration | |||
| 1.3.6.1.4.1.24062.2.2.17.2.3.1 | TableipConfigurationTable | not-accessible | current | Table of descriptive information and configuration about the IP of the device. |
| 1.3.6.1.4.1.24062.2.2.17.2.3.1.1 | RowipConfigurationEntry | not-accessible | current | Information configuring static IP or DHCP configuration of the device. |
| 1.3.6.1.4.1.24062.2.2.17.2.3.1.1.1 | ColumnipConfigurationIndex | not-accessible | current | This object identifies IP configuration entries. |
| 1.3.6.1.4.1.24062.2.2.17.2.3.1.1.2 | ColumnipConfigurationDHCPStatus | read-write | current | Parameter configuring DHCP client functionality of the device. When enabled, device will be a DHCP client and request for the IP configuration from DHCP server… |
| 1.3.6.1.4.1.24062.2.2.17.2.3.1.1.3 | ColumnipConfigurationAddress | read-write | current | The IP address of switch. An IP address (Internet Protocol address) is a unique address that devices use in order to identify and communicate with each other o… |
| 1.3.6.1.4.1.24062.2.2.17.2.3.1.1.4 | ColumnipConfigurationSubMask | read-write | current | The subnet mask is a 32-bit number in the same format and representation as IP addresses. The subnet mask determines which bits in the IP address are interpret… |
| 1.3.6.1.4.1.24062.2.2.17.2.3.1.1.5 | ColumnipConfigurationGateway | read-write | current | The default gateway IP address identifies the gateway (for example, a router) that receives and forwards those packets whose addresses are unknown to the local… |
| 1.3.6.1.4.1.24062.2.2.17.2.3.1.1.6 | ColumnipConfigurationDNS1 | read-write | current | Parameter configuring the first DNS server of the device. The domain name system (DNS) stores and associates many types of information with domain names. Most … |
| 1.3.6.1.4.1.24062.2.2.17.2.3.1.1.7 | ColumnipConfigurationDNS2 | read-write | current | Parameter configuring the second DNS server of the device. |
| 1.3.6.1.4.1.24062.2.2.17.2.3.1.1.8 | ColumnipConfigurationStatus | read-create | current | The status of the IP configuration entry. Only one configuration entry is supported on the device. Set active(1) to activate the parameters of the entry on the… |
| 1.3.6.1.4.1.24062.2.2.17.2.4 | NodetimeSetting | |||
| 1.3.6.1.4.1.24062.2.2.17.2.4.1 | ScalarsystemTime | read-only | current | current system time in format yyyy.mm.dd-hh:mm:ss |
| 1.3.6.1.4.1.24062.2.2.17.2.4.2 | ScalarutcTimeZone | read-write | current | UTC Timezone list. (GMT-12:00) Eniwetok, Kwajalein (GMT-11:00) Midway Island, Samoa (GMT-10:00) Hawaii (GMT-09:00) Alaska (GMT-08:00) Pacific Time (US & Canada… |
| 1.3.6.1.4.1.24062.2.2.17.2.4.3 | NodedayLightSavingTime | |||
| 1.3.6.1.4.1.24062.2.2.17.2.4.3.1 | ScalardaylightSavingTimeStart | read-write | current | The start-time of daylight saveing period, in format mm.n.d/hh:mm m is month, valid range 1-12 (1=January, 2=February, ..., 12=December). n is week of the mont… |
| 1.3.6.1.4.1.24062.2.2.17.2.4.3.2 | ScalardaylightSavingTimeEnd | read-write | current | The end-time of daylight saveing period, in format mm.n.d/hh:mm m is month, valid range 1-12 (1=January, 2=February, ..., 12=December). n is week of the month … |
| 1.3.6.1.4.1.24062.2.2.17.2.4.3.3 | ScalardaylightSavingOffset | read-write | current | Daylight Saving Offset(Usually is 60 mins). When Enable and current time at Daylight Saving Period, the current time of the switch will be offseted by Daylight… |
| 1.3.6.1.4.1.24062.2.2.17.2.4.3.4 | ScalardaylightSavingTimeStatus | read-write | current | (1)Enable Daylight Saving Time. (2)Disable Daylight Saving Time. Daylight Saving Time: Use this OID to Enable/Disable Daylight Saving Time. |
| 1.3.6.1.4.1.24062.2.2.17.2.4.4 | Nodeieee1588 | |||
| 1.3.6.1.4.1.24062.2.2.17.2.4.4.1 | ScalarptpState | read-write | current | Enable or disable ieee1588 PTP daemon |
| 1.3.6.1.4.1.24062.2.2.17.2.4.4.2 | ScalarptpMode | read-write | current | Set PTP mode: Auto: Auto select master or slave. Master: Act as PTP master. Master: Act as PTP slave. |
| 1.3.6.1.4.1.24062.2.2.17.2.4.5 | NodeclockSource | |||
| 1.3.6.1.4.1.24062.2.2.17.2.4.5.1 | ScalarclockSourceSelection | read-write | current | . |
| 1.3.6.1.4.1.24062.2.2.17.2.4.5.2 | NodeclockSourceManual | |||
| 1.3.6.1.4.1.24062.2.2.17.2.4.5.2.1 | ScalarclockSourceManualSetting | read-write | current | set system time, in format yyyy.mm.dd-hh:mm:ss |
| 1.3.6.1.4.1.24062.2.2.17.2.4.5.3 | NodeclockSourceNtp | |||
| 1.3.6.1.4.1.24062.2.2.17.2.4.5.3.1 | TablentpTable | not-accessible | current | Table of descriptive information and configuration about NTP servers. NTP (Network Time Protocol) synchronizes timekeeping among a set of distributed time serv… |
| 1.3.6.1.4.1.24062.2.2.17.2.4.5.3.1.1 | RowntpEntry | not-accessible | current | Information configuring IP addresses of NTP servers. |
| 1.3.6.1.4.1.24062.2.2.17.2.4.5.3.1.1.1 | ColumnntpIndex | not-accessible | current | This object identifies the entry. |
| 1.3.6.1.4.1.24062.2.2.17.2.4.5.3.1.1.2 | ColumnntpServerIP | read-write | current | The IP address of an NTP Server. Set 0.0.0.0 or 255.255.255.255 to remove this config. |
| 1.3.6.1.4.1.24062.2.2.17.2.5 | NodedhcpServer | |||
| 1.3.6.1.4.1.24062.2.2.17.2.5.1 | ScalardhcpServerEnable | read-write | current | Enable or disable dhcp server function. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.2 | TabledhcpServerPoolTable | not-accessible | current | Table of descriptive information and configuration about DHCP server of the switch. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.2.1 | RowdhcpServerPoolEntry | not-accessible | current | An entry containing DHCP server information of the switch. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.2.1.1 | ColumndhcpServerPoolIndex | not-accessible | current | The index of the Address Pool. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.2.1.2 | ColumndhcpServerPoolName | read-only | current | The address pool name. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.2.1.3 | ColumndhcpServerPoolNetwork | read-write | current | The Subnet of the IP Address Pool. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.2.1.4 | ColumndhcpServerPoolSubMask | read-write | current | The subnet mask of the IP Address Pool. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.2.1.5 | ColumndhcpServerPoolGateway | read-write | current | The gateway address of the IP Address Pool. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.2.1.6 | ColumndhcpServerPoolLeaseTime | read-write | current | The lease time(in second) of the Address Pool. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.2.1.7 | ColumndhcpServerPoolStatus | read-create | current | The status of the Address Pool. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.3 | TabledhcpExcludedTable | not-accessible | current | Table of descriptive information and configuration about DHCP server of the switch. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.3.1 | RowdhcpExcludedEntry | not-accessible | current | An entry containing DHCP server information of the switch. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.3.1.1 | ColumndhcpExcludedIndex | not-accessible | current | The index of the Excluded Table. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.3.1.2 | ColumndhcpExcludedIp | read-write | current | The IP address . |
| 1.3.6.1.4.1.24062.2.2.17.2.5.3.1.3 | ColumndhcpExcludedStatus | read-create | current | The status of a address pool. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.4 | TabledhcpManualBindingTable | not-accessible | current | Table of descriptive information and configuration about DHCP server of the switch. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.4.1 | RowdhcpManualBindingEntry | not-accessible | current | An entry containing DHCP server information of the switch. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.4.1.1 | ColumndhcpManualBindingIndex | not-accessible | current | The index of the Static Binding Table. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.4.1.2 | ColumndhcpManualBindingIp | read-write | current | The IP address. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.4.1.3 | ColumndhcpManualBindingMac | read-write | current | The MAC address. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.4.1.4 | ColumndhcpManualBindingStatus | read-create | current | The status of the binding. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.5 | TabledhcpStaticPortTable | not-accessible | current | Table of descriptive information and configuration about DHCP server of the switch. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.5.1 | RowdhcpStaticPortEntry | not-accessible | current | An entry containing DHCP server information of the switch. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.5.1.1 | ColumndhcpStaticPortIndex | not-accessible | current | The index of the StaticPort Table. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.5.1.2 | ColumndhcpStaticPortNumber | read-write | current | The port number . |
| 1.3.6.1.4.1.24062.2.2.17.2.5.5.1.3 | ColumndhcpStaticPortIp | read-write | current | The IP address . |
| 1.3.6.1.4.1.24062.2.2.17.2.5.5.1.4 | ColumndhcpStaticPortStatus | read-create | current | The status of a static port entry. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.6 | TabledhcpOption82Table | not-accessible | current | DHCP server option82 table. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.6.1 | RowdhcpOption82Entry | not-accessible | current | DHCP server option82 entry. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.6.1.1 | ColumndhcpOption82Index | not-accessible | current | The index of the table. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.6.1.2 | ColumndhcpOption82CircuitIdType | read-write | current | The Circuit-ID type of this option. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.6.1.3 | ColumndhcpOption82CircuitIdValue | read-write | current | The Circuit-ID value of this option. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.6.1.4 | ColumndhcpOption82RemoteIdType | read-write | current | The Remote-ID type of this option. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.6.1.5 | ColumndhcpOption82RemoteIdValue | read-write | current | The Remote-ID value of this option. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.6.1.6 | ColumndhcpOption82Ip | read-write | current | The IP Address bind to this option. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.6.1.7 | ColumndhcpOption82Status | read-create | current | he status of a static port entry. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.7 | TabledhcpServerLeasedTable | not-accessible | current | Table of descriptive information and configuration about DHCP server of the switch. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.7.1 | RowdhcpServerLeasedEntry | not-accessible | current | An entry containing DHCP server information of the switch. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.7.1.1 | ColumndhcpServerLeasedIndex | not-accessible | current | The index of the Leased Table. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.7.1.2 | ColumndhcpServerLeasedIp | read-only | current | The client IP address. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.7.1.3 | ColumndhcpServerLeasedMac | read-only | current | The client MAC address. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.7.1.4 | ColumndhcpServerLeasedType | read-only | current | . |
| 1.3.6.1.4.1.24062.2.2.17.2.5.7.1.5 | ColumndhcpServerLeasedTime | read-only | current | The lease time of the client. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.8 | ScalardhcpRelayAgentEnable | read-write | current | Enable or disable dhcp relay agent function. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.9 | ScalardhcpRelayAgentPolicy | read-write | current | Keep(1): Keeps the original option 82 field and forwards to server drop(2): Drops the option 82 field and do not add any option 82 field replace(3): Replaces t… |
| 1.3.6.1.4.1.24062.2.2.17.2.5.10 | TabledhcpRelayAgentCircuitIdTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.10.1 | RowdhcpRelayAgentCircuitIdEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.10.1.1 | ColumndhcpRelayAgentCircuitIdPortNum | read-only | current | Description. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.10.1.2 | ColumndhcpRelayAgentCircuitIdType | read-write | current | Circuit-ID type of the Option82 added by Relay Agent. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.10.1.3 | ColumndhcpRelayAgentCircuitIdValue | read-write | current | Circuit-ID value of the Option82 added by Relay Agent, the format can be String or Hexadecimal value. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.10.1.4 | ColumndhcpRelayAgentCircuitIdDisplay | read-only | current | Display the Circuit-ID value by Hexadecimal format |
| 1.3.6.1.4.1.24062.2.2.17.2.5.11 | ScalardhcpRelayAgentRemoteIdType | read-write | current | Remote-ID type of the Option82 added by Relay Agent. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.12 | ScalardhcpRelayAgentRemoteIdValue | read-write | current | Remote-ID value of the Option82 added by Relay Agent, the format can be String or Hexadecimal value. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.13 | ScalardhcpRelayAgentRemoteIdDisplay | read-write | current | Remote-ID value of the Option82 added by Relay Agent. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.14 | TabledhcpHelperAddressTable | not-accessible | current | Table of descriptive information and configuration about DHCP relay helper address of the switch. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.14.1 | RowdhcpHelperAddressEntry | not-accessible | current | An entry containing DHCP relay information of the switch. |
| 1.3.6.1.4.1.24062.2.2.17.2.5.14.1.1 | ColumndhcpHelperAddress | read-write | current | The IP address . |
| 1.3.6.1.4.1.24062.2.2.17.2.6 | NodebackupAndRestore | |||
| 1.3.6.1.4.1.24062.2.2.17.2.6.1 | ScalarbackupServerIP | read-write | current | The IP address of a TFTP server to which a startup configuration can be uploaded. |
| 1.3.6.1.4.1.24062.2.2.17.2.6.2 | ScalarbackupAgentBoardFwFileName | read-write | current | The filename to backup to. |
| 1.3.6.1.4.1.24062.2.2.17.2.6.3 | ScalarbackupStatus | read-write | current | Setting this object to active(1) trigger the TFTP upload action. Setting this object to notActive(2) has no effect. The system always returns the value notActi… |
| 1.3.6.1.4.1.24062.2.2.17.2.6.4 | ScalarrestoreServerIP | read-write | current | The IP address of a TFTP server from which the startup configuration can be downloaded. |
| 1.3.6.1.4.1.24062.2.2.17.2.6.5 | ScalarrestoreAgentBoardFwFileName | read-write | current | The file name to restore from. |
| 1.3.6.1.4.1.24062.2.2.17.2.6.6 | ScalarrestoreStatus | read-write | current | Setting this object to active(1) trigger the TFTP download action. Setting this object to notActive(2) has no effect. The system always returns the value notAc… |
| 1.3.6.1.4.1.24062.2.2.17.2.7 | NodetftpUpgrade | |||
| 1.3.6.1.4.1.24062.2.2.17.2.7.1 | ScalartftpDownloadServerIP | read-write | current | The IP address of a TFTP server where a firmware image can be downloaded. |
| 1.3.6.1.4.1.24062.2.2.17.2.7.2 | ScalartftpDownloadAgentBoardFwFileName | read-write | current | The file name of the firmware to be downloaded. |
| 1.3.6.1.4.1.24062.2.2.17.2.7.3 | ScalartftpDownloadStatus | read-write | current | Setting this object to active(1) trigger the TFTP download action. Setting this object to notActive(2) has no effect. The system always returns the value notAc… |
| 1.3.6.1.4.1.24062.2.2.17.2.8 | NodefactoryDefault | |||
| 1.3.6.1.4.1.24062.2.2.17.2.8.1 | ScalarfactoryDefaultActive | read-write | current | Set to active(1) to reload factory default configuration. Reloading factory default will overwrite your current configuration file with factocy default configu… |
| 1.3.6.1.4.1.24062.2.2.17.2.9 | NodesystemReboot | |||
| 1.3.6.1.4.1.24062.2.2.17.2.9.1 | ScalarsystemRebootActive | read-write | current | Set active(1) to restart the device. Set to notActive(2) has no effect. The device always returns the value notActive(2) when this object is read. |
| 1.3.6.1.4.1.24062.2.2.17.3 | NodeportConfiguration | |||
| 1.3.6.1.4.1.24062.2.2.17.3.1 | NodeportControl | |||
| 1.3.6.1.4.1.24062.2.2.17.3.1.1 | TableportCtrlTable | not-accessible | current | Table of information and configuration for each ports. |
| 1.3.6.1.4.1.24062.2.2.17.3.1.1.1 | RowportCtrlEntry | not-accessible | current | An entry containing information and configuration for a port. |
| 1.3.6.1.4.1.24062.2.2.17.3.1.1.1.1 | ColumnportCtrlIndex | not-accessible | current | Index of the port control entry. |
| 1.3.6.1.4.1.24062.2.2.17.3.1.1.1.2 | ColumnportCtrlPortName | read-only | current | The name of port. |
| 1.3.6.1.4.1.24062.2.2.17.3.1.1.1.3 | ColumnportCtrlPortStatus | read-write | current | To enable or disable of this port. |
| 1.3.6.1.4.1.24062.2.2.17.3.1.1.1.4 | ColumnportCtrlSpeedAndDuplex | read-write | current | Speed and duplex configuraion. Different speed and duplex modes are available. There are speeds: 100 megabits per second (Fast Ethernet), and 10 megabits per s… |
| 1.3.6.1.4.1.24062.2.2.17.3.1.1.1.5 | ColumnportCtrlFlowControl | read-write | current | Flow control configuration. Flow control is used to throttle the throughput rate of an end station to avoid dropping packets during network congestion. If flow… |
| 1.3.6.1.4.1.24062.2.2.17.3.1.1.1.6 | ColumnportCtrlPortDescription | read-write | current | The description of port. |
| 1.3.6.1.4.1.24062.2.2.17.3.2 | NodeportStatus | |||
| 1.3.6.1.4.1.24062.2.2.17.3.2.1 | TableportStatusTable | not-accessible | current | Table of descriptive and statistics information about each ports. |
| 1.3.6.1.4.1.24062.2.2.17.3.2.1.1 | RowportStatusEntry | not-accessible | current | An entry containing statistics information of a port. |
| 1.3.6.1.4.1.24062.2.2.17.3.2.1.1.1 | ColumnportStatusIndex | read-only | current | Index of port statistic table. |
| 1.3.6.1.4.1.24062.2.2.17.3.2.1.1.2 | ColumnportStatusType | read-only | current | Indicates the type of the port. |
| 1.3.6.1.4.1.24062.2.2.17.3.2.1.1.3 | ColumnportStatusLink | read-only | current | Indicate the link state of the port. |
| 1.3.6.1.4.1.24062.2.2.17.3.2.1.1.4 | ColumnportStatusState | read-only | current | Indicate the state of the port. |
| 1.3.6.1.4.1.24062.2.2.17.3.2.1.1.5 | ColumnportStatusSpeedDuplex | read-only | current | Indicate the speed and duplex mode of the port. |
| 1.3.6.1.4.1.24062.2.2.17.3.2.1.1.6 | ColumnportStatusFlowCtrl | read-only | current | Indicate the flow control status of the port. |
| 1.3.6.1.4.1.24062.2.2.17.3.2.1.1.7 | ColumnsfpVender | read-only | current | The vender name of the Small Form Pluggable (SFP) optical transceiver module. |
| 1.3.6.1.4.1.24062.2.2.17.3.2.1.1.8 | ColumnsfpWavelength | read-only | current | The wave length in nanometers (nm) of the Small Form Pluggable (SFP) optical transceiver module. |
| 1.3.6.1.4.1.24062.2.2.17.3.2.1.1.9 | ColumnsfpDistance | read-only | current | The maximum transimission distance in meters of the Small Form Pluggable (SFP) optical transceiver module. |
| 1.3.6.1.4.1.24062.2.2.17.3.3 | NoderateLimiting | |||
| 1.3.6.1.4.1.24062.2.2.17.3.3.1 | TablerateLimitingTable | not-accessible | current | Table of descriptive information and configuration about port rate limiting. You can set up bandwidth rate and packet limitation type for each ports. Rate limi… |
| 1.3.6.1.4.1.24062.2.2.17.3.3.1.1 | RowrateLimitingEntry | not-accessible | current | An entry containing information and configuration about port rate limiting. |
| 1.3.6.1.4.1.24062.2.2.17.3.3.1.1.1 | ColumnrateLimitingPortNum | read-only | current | The port number. |
| 1.3.6.1.4.1.24062.2.2.17.3.3.1.1.2 | ColumnrateLimitingIngressLimitType | read-write | current | The type of ingress packets to be filtered. |
| 1.3.6.1.4.1.24062.2.2.17.3.3.1.1.3 | ColumnrateLimitingIngressRate | read-write | current | Ingress rate in Mbps, the rate range is from 1 Mbps to 100 Mbps and zero means no limit. |
| 1.3.6.1.4.1.24062.2.2.17.3.3.1.1.4 | ColumnrateLimitingEgressRate | read-write | current | Egress rate in Mbps, the rate range is from 1 Mbps to 100 Mbps and zero means no limit. Egress rate limiting has effect on all types of packets, including unic… |
| 1.3.6.1.4.1.24062.2.2.17.3.4 | NodeportTrunk | |||
| 1.3.6.1.4.1.24062.2.2.17.3.4.1 | NodeaggregatorSetting | |||
| 1.3.6.1.4.1.24062.2.2.17.3.4.1.1 | TableportTrunkAggregatorSettingTable | not-accessible | current | Table of descriptive information and configuration about of each trunk group in this system. Link aggregation, or IEEE 802.3ad, is a method of combining physic… |
| 1.3.6.1.4.1.24062.2.2.17.3.4.1.1.1 | RowportTrunkAggregatorSettingEntry | not-accessible | current | Information controlling aggregator configuration. |
| 1.3.6.1.4.1.24062.2.2.17.3.4.1.1.1.1 | ColumnportTrunkPortIndex | read-only | current | The port number. |
| 1.3.6.1.4.1.24062.2.2.17.3.4.1.1.1.2 | ColumnportTrunkAggregatorGroupId | read-write | current | Trunk group Id. Upto 8 ports can be aggregated into a group and 8 groups can be configured in the device. |
| 1.3.6.1.4.1.24062.2.2.17.3.4.1.1.1.3 | ColumnportTrunkAggregatorType | read-write | current | The Aggregator type. You can assign the aggregator staticly by setting to static(1), or setting to lacp(2) to enable the LACP protocol. The Link Aggregation Co… |
| 1.3.6.1.4.1.24062.2.2.17.3.4.1.2 | ScalarportTrunkAggregatorSettingApply | read-write | current | set active(1) to apply the configuration |
| 1.3.6.1.4.1.24062.2.2.17.3.4.2 | NodeaggregatorStatus | |||
| 1.3.6.1.4.1.24062.2.2.17.3.4.2.1 | TableportTrunkAggregatorStatusTable | not-accessible | current | Table of descriptive information about trunk groups in the device. |
| 1.3.6.1.4.1.24062.2.2.17.3.4.2.1.1 | RowportTrunkAggregatorStatusEntry | not-accessible | current | An entry containing information about current configuration of trunk groups. |
| 1.3.6.1.4.1.24062.2.2.17.3.4.2.1.1.1 | ColumnportTrunkAggregatorGroupIndex | read-only | current | The trunk group identifier. |
| 1.3.6.1.4.1.24062.2.2.17.3.4.2.1.1.2 | ColumnportTrunkAggregatorGroupType | read-only | current | The Aggregator type. (1) The trunk group is LACP disabled and configured staticly by administrator. (2) The trunk group is LACP enabled. |
| 1.3.6.1.4.1.24062.2.2.17.3.4.2.1.1.3 | ColumnportTrunkAggregatorGroupMember | read-only | current | The ports are aggregated with other ports. |
| 1.3.6.1.4.1.24062.2.2.17.3.4.2.1.1.4 | ColumnportTrunkAggregatorIndividual | read-only | current | A port is LACP enabled but not aggregated with other ports. |
| 1.3.6.1.4.1.24062.2.2.17.3.4.2.1.1.5 | ColumnportTrunkAggregatorLinkDown | read-only | current | The ports which are linked down. |
| 1.3.6.1.4.1.24062.2.2.17.4 | NodenetworkRedundancy | |||
| 1.3.6.1.4.1.24062.2.2.17.4.2 | Noderstp | |||
| 1.3.6.1.4.1.24062.2.2.17.4.2.1 | ScalarrstpStatus | read-write | current | Enable Spanning Tree protocol, Rapid Spanning Tree protocol, or disable . Rapid Spanning Tree Algorithm and Protocol (RSTP) provides a loop free topology for a… |
| 1.3.6.1.4.1.24062.2.2.17.4.2.2 | ScalarrstpPriority | read-write | current | A value used to identify the root bridge. The bridge with the lowest value has the highest priority and is selected as the root. Enter a number 0 through 61440… |
| 1.3.6.1.4.1.24062.2.2.17.4.2.3 | ScalarrstpMaxAge | read-write | current | The number of seconds a bridge waits without receiving Spanning-Tree Protocol configuration messages before attempting a reconfiguration. Enter a number 6 thro… |
| 1.3.6.1.4.1.24062.2.2.17.4.2.4 | ScalarrstpHelloTime | read-write | current | The number of seconds between the transmission of Spanning-Tree Protocol configuration messages. Enter a number 1 through 10 Note: 2*(Forward Delay Time-1) sho… |
| 1.3.6.1.4.1.24062.2.2.17.4.2.5 | ScalarrstpForwardDelayTime | read-write | current | The number of seconds a port waits before changing from its Spanning-Tree Protocol learning and listening states to the forwarding state. Enter a number 4 thro… |
| 1.3.6.1.4.1.24062.2.2.17.4.2.6 | TablerstpPerPortCfgTable | not-accessible | current | Table of descriptive information and configuration about RSTP on each port. |
| 1.3.6.1.4.1.24062.2.2.17.4.2.6.1 | RowrstpPerPortCfgEntry | not-accessible | current | Information configuring RSTP on a port. |
| 1.3.6.1.4.1.24062.2.2.17.4.2.6.1.1 | ColumnrstpPerPortCfgPortNum | not-accessible | current | The port number. |
| 1.3.6.1.4.1.24062.2.2.17.4.2.6.1.2 | ColumnrstpPerPortCfgPathCost | read-write | current | The cost of the path to the other bridge from this transmitting bridge at the specified port. Enter a number from 1 through 200000000. (0 will auto set path co… |
| 1.3.6.1.4.1.24062.2.2.17.4.2.6.1.3 | ColumnrstpPerPortCfgPriority | read-write | current | Decide which port should be blocked by priority in LAN. Enter a number from 0 through 240 in steps of 16. |
| 1.3.6.1.4.1.24062.2.2.17.4.2.6.1.4 | ColumnrstpPerPortCfgAdminP2P | read-write | current | Some of the rapid state transactions that are possible within RSTP are dependent upon whether the Port concerned can only be connected to exactly one other Bri… |
| 1.3.6.1.4.1.24062.2.2.17.4.2.6.1.5 | ColumnrstpPerPortCfgAdminEdge | read-write | current | Present in implementations that support the identification of edge ports. All ports directly connected to end stations cannot create bridging loops in the netw… |
| 1.3.6.1.4.1.24062.2.2.17.4.3 | NodebridgeInformation | |||
| 1.3.6.1.4.1.24062.2.2.17.4.3.1 | TablerstpRootBridgeInformationTable | not-accessible | current | Table of descriptive information about root bridge of rapid spanning tree in this system. |
| 1.3.6.1.4.1.24062.2.2.17.4.3.1.1 | RowrstpRootBridgeInformationEntry | not-accessible | current | An entry in the table, containing information about root bridge information of the RSTP. |
| 1.3.6.1.4.1.24062.2.2.17.4.3.1.1.1 | ColumnrstpRootBridgeInformationIndex | not-accessible | current | Index of root bridge information table. |
| 1.3.6.1.4.1.24062.2.2.17.4.3.1.1.2 | ColumnrstpRootBridgeInformationBridgeID | read-only | current | Bridge ID. |
| 1.3.6.1.4.1.24062.2.2.17.4.3.1.1.3 | ColumnrstpRootBridgeInformationRootPriority | read-only | current | Root Priority. |
| 1.3.6.1.4.1.24062.2.2.17.4.3.1.1.4 | ColumnrstpRootBridgeInformationRootPort | read-only | current | Root Port. |
| 1.3.6.1.4.1.24062.2.2.17.4.3.1.1.5 | ColumnrstpRootBridgeInformationRootPathCost | read-only | current | Root Path Cost. |
| 1.3.6.1.4.1.24062.2.2.17.4.3.1.1.6 | ColumnrstpRootBridgeInformationMaxAge | read-only | current | Max Age. |
| 1.3.6.1.4.1.24062.2.2.17.4.3.1.1.7 | ColumnrstpRootBridgeInformationHelloTime | read-only | current | Hello Time. |
| 1.3.6.1.4.1.24062.2.2.17.4.3.1.1.8 | ColumnrstpRootBridgeInformationForwardDelay | read-only | current | Forward Delay Time. |
| 1.3.6.1.4.1.24062.2.2.17.4.3.2 | TablerstpPerPortInfoTable | not-accessible | current | Table of descriptive information and configuration about rapid spanning tree (Per port). |
| 1.3.6.1.4.1.24062.2.2.17.4.3.2.1 | RowrstpPerPortInfoEntry | not-accessible | current | An entry in the table, containing inforamtion about RSTP (Per port). |
| 1.3.6.1.4.1.24062.2.2.17.4.3.2.1.1 | ColumnrstpPerPortInfoPortNum | not-accessible | current | Port number. |
| 1.3.6.1.4.1.24062.2.2.17.4.3.2.1.2 | ColumnrstpPerPortInfoPathCost | read-only | current | The cost of the path to the other bridge from this transmitting bridge at the specified port. Enter a number 1 through 200000000. |
| 1.3.6.1.4.1.24062.2.2.17.4.3.2.1.3 | ColumnrstpPerPortInfoPriority | read-only | current | Decide which port should be blocked by priority in LAN. Enter a number 0 through 240 in steps of 16. |
| 1.3.6.1.4.1.24062.2.2.17.4.3.2.1.4 | ColumnrstpPerPortInfoAdminP2P | read-only | current | Some of the rapid state transactions that are possible within RSTP are dependent upon whether the Port concerned can only be connected to exactly one other Bri… |
| 1.3.6.1.4.1.24062.2.2.17.4.3.2.1.5 | ColumnrstpPerPortInfoAdminEdge | read-only | current | Present in implementations that support the identification of edge ports. All ports directly connected to end stations cannot create bridging loops in the netw… |
| 1.3.6.1.4.1.24062.2.2.17.4.3.2.1.6 | ColumnrstpPerPortInfoState | read-only | current | |
| 1.3.6.1.4.1.24062.2.2.17.4.3.2.1.7 | ColumnrstpPerPortInfoRole | read-only | current | Descriptive information about RSTP switch port roles: disabled(1) RSTP is disabled on this port. root(2) A forwarding port that has been elected for the spanni… |
| 1.3.6.1.4.1.24062.2.2.17.4.3.2.1.8 | ColumnrstpPerPortInfoAggregated | read-only | current | group ID(Static) or N/A or group ID(LACP) |
| 1.3.6.1.4.1.24062.2.2.17.4.4 | NodemultipleSuperRing | |||
| 1.3.6.1.4.1.24062.2.2.17.4.4.1 | TablemultipleSuperRingConfigTable | not-accessible | current | Table of configuration about redundany protocol in the device. |
| 1.3.6.1.4.1.24062.2.2.17.4.4.1.1 | RowmultipleSuperRingConfigEntry | not-accessible | current | An entry containing information about current configuration of rings. |
| 1.3.6.1.4.1.24062.2.2.17.4.4.1.1.1 | ColumnsuperRingConfigId | not-accessible | current | Ring Id. |
| 1.3.6.1.4.1.24062.2.2.17.4.4.1.1.2 | ColumnsuperRingName | read-write | current | Super Ring name. |
| 1.3.6.1.4.1.24062.2.2.17.4.4.1.1.3 | ColumnsuperRingConfigVersion | read-write | current | Super Ring funtion version selection. Super Ring: Backward compatible with legacy super ring mechanism. Note: This model supports v1 non-Redundancy Management … |
| 1.3.6.1.4.1.24062.2.2.17.4.4.1.1.4 | ColumnsuperRingDevicePriority | read-write | current | Super Ring device priority setting. |
| 1.3.6.1.4.1.24062.2.2.17.4.4.1.1.5 | ColumnsuperRingRingPort1 | read-write | current | RingPort1 should not equal to RingRort2. |
| 1.3.6.1.4.1.24062.2.2.17.4.4.1.1.6 | ColumnsuperRingRingPort2 | read-write | current | RingPort2 should not equal to RingRort1. |
| 1.3.6.1.4.1.24062.2.2.17.4.4.1.1.7 | ColumnsuperRingRingPort1PathCost | read-write | current | |
| 1.3.6.1.4.1.24062.2.2.17.4.4.1.1.8 | ColumnsuperRingRingPort2PathCost | read-write | current | |
| 1.3.6.1.4.1.24062.2.2.17.4.4.1.1.9 | ColumnsuperRingRapidDualHomingStatus | read-write | current | Rapid Dual Homing funtion status. Rapid Dual Homing is a redundancy protocol, which is compatible with RSTP. (1) Rapid Dual Homing function is enabled. (2) Rap… |
| 1.3.6.1.4.1.24062.2.2.17.4.4.1.1.10 | ColumnsuperRingStatus | read-create | current | Status of this ring. |
| 1.3.6.1.4.1.24062.2.2.17.4.4.2 | TablemultipleSuperRingStatusTable | not-accessible | current | Table of status information about redundany protocol in the device. |
| 1.3.6.1.4.1.24062.2.2.17.4.4.2.1 | RowmultipleSuperRingStatusEntry | not-accessible | current | An entry containing information about current status of rings. |
| 1.3.6.1.4.1.24062.2.2.17.4.4.2.1.1 | ColumnsuperRingStatusId | read-only | current | Ring Id. |
| 1.3.6.1.4.1.24062.2.2.17.4.4.2.1.2 | ColumnsuperRingVersion | read-only | current | Super Ring funtion version selection. Super Ring: Backward compatible with legacy super ring mechanism. Note: This model supports v1 non-Redundancy Management … |
| 1.3.6.1.4.1.24062.2.2.17.4.4.2.1.3 | ColumnsuperRingDeviceRole | read-only | current | Super Ring role status. (1) disabled. (2) Redundancy manager. (3) Non redundancy manager. |
| 1.3.6.1.4.1.24062.2.2.17.4.4.2.1.4 | ColumnsuperRingRingPortList1 | read-only | current | Port list for ring port1. |
| 1.3.6.1.4.1.24062.2.2.17.4.4.2.1.5 | ColumnsuperRingRingPortList2 | read-only | current | Port list for ring port2. |
| 1.3.6.1.4.1.24062.2.2.17.4.4.2.1.6 | ColumnsuperRingRingStatus | read-only | current | Super Ring ring status. (1) Disabled - The ring on this device is disabled. (1) Normal - Ring is complete. (2) Abnormal - Ring is not complete. |
| 1.3.6.1.4.1.24062.2.2.17.4.4.2.1.7 | ColumnsuperRingRmMac | read-only | current | RM mac address. |
| 1.3.6.1.4.1.24062.2.2.17.4.4.2.1.8 | ColumnsuperRingBlockedPort | read-only | current | The blocked ports in ring Normal state. |
| 1.3.6.1.4.1.24062.2.2.17.4.4.2.1.9 | ColumnsuperRingRoleTransitionCount | read-only | current | |
| 1.3.6.1.4.1.24062.2.2.17.4.4.2.1.10 | ColumnsuperRingRingStateTransitionCount | read-only | current | |
| 1.3.6.1.4.1.24062.2.2.17.4.5 | Nodemstp | |||
| 1.3.6.1.4.1.24062.2.2.17.4.5.1 | ScalarmstpRegionName | read-write | current | MSTP region name. |
| 1.3.6.1.4.1.24062.2.2.17.4.5.2 | ScalarmstpRegionRevision | read-write | current | MSTP region revision. |
| 1.3.6.1.4.1.24062.2.2.17.4.5.3 | TablemstpPerInstCfgTable | not-accessible | current | Table of descriptive information and configuration about STP on each port. |
| 1.3.6.1.4.1.24062.2.2.17.4.5.3.1 | RowmstpPerInstCfgEntry | not-accessible | current | Information configuring MSTP on a instance. |
| 1.3.6.1.4.1.24062.2.2.17.4.5.3.1.1 | ColumnmstpPerInstCfgInstanceID | not-accessible | current | The instance ID. |
| 1.3.6.1.4.1.24062.2.2.17.4.5.3.1.2 | ColumnmstpPerInstCfgVlanGroup | read-write | current | VLAN group of instance. |
| 1.3.6.1.4.1.24062.2.2.17.4.5.3.1.3 | ColumnmstpPerInstCfgInstancePriority | read-write | current | A value used to identify the instance root. The instance with the lowest value has the highest priority and is selected as the root. Enter a number 0 through 6… |
| 1.3.6.1.4.1.24062.2.2.17.4.5.3.1.4 | ColumnmstpPerInstCfgStatus | read-create | current | Status of this Instance. |
| 1.3.6.1.4.1.24062.2.2.17.4.5.4 | TablemstpPerPortCfgTable | not-accessible | current | Table of descriptive information and configuration about MSTP on each port. |
| 1.3.6.1.4.1.24062.2.2.17.4.5.4.1 | RowmstpPerPortCfgEntry | not-accessible | current | Information configuring MSTP on a port. |
| 1.3.6.1.4.1.24062.2.2.17.4.5.4.1.1 | ColumnmstpPerPortCfgIndex | not-accessible | current | The index of MstpPerPortCfgEntry. |
| 1.3.6.1.4.1.24062.2.2.17.4.5.4.1.2 | ColumnmstpPerPortCfgInstanceID | read-only | current | The instance ID. |
| 1.3.6.1.4.1.24062.2.2.17.4.5.4.1.3 | ColumnmstpPerPortCfgPortNum | read-only | current | The port number. |
| 1.3.6.1.4.1.24062.2.2.17.4.5.4.1.4 | ColumnmstpPerPortCfgPathCost | read-write | current | The cost of the path to the other bridge from this transmitting bridge at the specified port. Enter a number from 1 through 200000000. (0 will auto set path co… |
| 1.3.6.1.4.1.24062.2.2.17.4.5.4.1.5 | ColumnmstpPerPortCfgPriority | read-write | current | Decide which port should be blocked by priority in LAN. Enter a number from 0 through 240 in steps of 16. |
| 1.3.6.1.4.1.24062.2.2.17.4.5.4.1.6 | ColumnmstpPerPortCfgLinkType | read-write | current | Some of the rapid state transactions that are possible within RSTP are dependent upon whether the Port concerned can only be connected to exactly one other Bri… |
| 1.3.6.1.4.1.24062.2.2.17.4.5.4.1.7 | ColumnmstpPerPortCfgEdgePort | read-write | current | Present in implementations that support the identification of edge ports. All ports directly connected to end stations cannot create bridging loops in the netw… |
| 1.3.6.1.4.1.24062.2.2.17.4.6 | NodemstpBridgeInformation | |||
| 1.3.6.1.4.1.24062.2.2.17.4.6.1 | TablemstpRootInformationTable | not-accessible | current | Table of descriptive information about root bridge of rapid spanning tree in this system. |
| 1.3.6.1.4.1.24062.2.2.17.4.6.1.1 | RowmstpRootInformationEntry | not-accessible | current | An entry in the table, containing information about root bridge information of the MSTP. |
| 1.3.6.1.4.1.24062.2.2.17.4.6.1.1.1 | ColumnmstpRootInformationInstanceID | read-only | current | The instance ID. |
| 1.3.6.1.4.1.24062.2.2.17.4.6.1.1.2 | ColumnmstpRootInformationRootAddress | read-only | current | Root Address. |
| 1.3.6.1.4.1.24062.2.2.17.4.6.1.1.3 | ColumnmstpRootInformationRootPriority | read-only | current | Root Priority. |
| 1.3.6.1.4.1.24062.2.2.17.4.6.1.1.4 | ColumnmstpRootInformationRootPort | read-only | current | Root Port. |
| 1.3.6.1.4.1.24062.2.2.17.4.6.1.1.5 | ColumnmstpRootInformationRootPathCost | read-only | current | Root Path Cost. |
| 1.3.6.1.4.1.24062.2.2.17.4.6.1.1.6 | ColumnmstpRootInformationMaxAge | read-only | current | Max Age. |
| 1.3.6.1.4.1.24062.2.2.17.4.6.1.1.7 | ColumnmstpRootInformationHelloTime | read-only | current | Hello Time. |
| 1.3.6.1.4.1.24062.2.2.17.4.6.1.1.8 | ColumnmstpRootInformationForwardDelay | read-only | current | Forward Delay Time. |
| 1.3.6.1.4.1.24062.2.2.17.4.6.2 | TablemstpPerPortInfoTable | not-accessible | current | Table of descriptive information and configuration about rapid spanning tree (Per port). |
| 1.3.6.1.4.1.24062.2.2.17.4.6.2.1 | RowmstpPerPortInfoEntry | not-accessible | current | An entry in the table, containing information about MSTP (Per port). |
| 1.3.6.1.4.1.24062.2.2.17.4.6.2.1.1 | ColumnmstpPerPortInfoIndex | not-accessible | current | The index of MstpPerPortInfoEntry. |
| 1.3.6.1.4.1.24062.2.2.17.4.6.2.1.2 | ColumnmstpPerPortInfoInstanceID | read-only | current | The instance ID. |
| 1.3.6.1.4.1.24062.2.2.17.4.6.2.1.3 | ColumnmstpPerPortInfoPortNum | read-only | current | Port number. |
| 1.3.6.1.4.1.24062.2.2.17.4.6.2.1.4 | ColumnmstpPerPortInfoRole | read-only | current | Descriptive information about MSTP switch port roles: disabled(1) MSTP is disabled on this port. root(2) A forwarding port that has been elected for the spanni… |
| 1.3.6.1.4.1.24062.2.2.17.4.6.2.1.5 | ColumnmstpPerPortInfoState | read-only | current | |
| 1.3.6.1.4.1.24062.2.2.17.4.6.2.1.6 | ColumnmstpPerPortInfoPathCost | read-only | current | The cost of the path to the other bridge from this transmitting bridge at the specified port. Enter a number 1 through 200000000. |
| 1.3.6.1.4.1.24062.2.2.17.4.6.2.1.7 | ColumnmstpPerPortInfoPriority | read-only | current | Decide which port should be blocked by priority in LAN. Enter a number 0 through 240 in steps of 16. |
| 1.3.6.1.4.1.24062.2.2.17.4.6.2.1.8 | ColumnmstpPerPortInfoLinkType | read-only | current | Some of the rapid state transactions that are possible within MSTP are dependent upon whether the Port concerned can only be connected to exactly one other Bri… |
| 1.3.6.1.4.1.24062.2.2.17.4.6.2.1.9 | ColumnmstpPerPortInfoEdgePort | read-only | current | Present in implementations that support the identification of edge ports. All ports directly connected to end stations cannot create bridging loops in the netw… |
| 1.3.6.1.4.1.24062.2.2.17.5 | Nodevlan | |||
| 1.3.6.1.4.1.24062.2.2.17.5.1 | ScalarvlanManagementVlan | read-write | current | The VLAN from which managemnet traffic can access the device. By default, VLAN 1 is management VLAN. |
| 1.3.6.1.4.1.24062.2.2.17.5.2 | Nodeieee8021qVlan | |||
| 1.3.6.1.4.1.24062.2.2.17.5.2.1 | Tabledot1qPortVlanTable | not-accessible | current | A table containing per port control and status information for IEEE802.1Q VLAN configuration in the device. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.1.1 | Rowdot1qPortVlanEntry | not-accessible | current | Information controlling IEEE802.1Q VLAN configuration for a port on the device. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.1.1.1 | Columndot1qPortIndex | read-only | current | The port identifier. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.1.1.2 | Columndot1qPvid | read-write | current | The default Port VID, the VLAN ID assigned to an untagged frame or a Priority-Tagged frame received on the port. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.1.1.3 | Columndot1qPortAcceptableFrameTypes | read-write | current | When admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged only frames received on this port. When admitAll(1), untagged frames or … |
| 1.3.6.1.4.1.24062.2.2.17.5.2.1.1.4 | Columndot1qPortIngressFiltering | read-write | current | When true(1) the device will discard incoming frames whose VLAN classification do not include this port in its Member set. When false(2), the port will accept … |
| 1.3.6.1.4.1.24062.2.2.17.5.2.2 | Tabledot1qVlanStaticTable | not-accessible | current | A table containing configuration information for each VLAN configured into the device by management. All entries are permanent and will be restored after the d… |
| 1.3.6.1.4.1.24062.2.2.17.5.2.2.1 | Rowdot1qVlanStaticEntry | not-accessible | current | Static information of a VLAN configured into the device by management. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.2.1.1 | Columndot1qVlanIndex | read-only | current | The VLAN Identifier (VID) refering to this VLAN. The valid range is from 1 to 4094. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.2.1.2 | Columndot1qVlanStaticName | read-write | current | An administratively assigned string, which is used to identify the VLAN. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.2.1.3 | Columndot1qVlanStaticEgressPorts | read-only | current | The set of ports which are permanently configured to transmitting traffic for this VLAN as either tagged or untagged frames. Each octet within this value speci… |
| 1.3.6.1.4.1.24062.2.2.17.5.2.2.1.4 | Columndot1qVlanStaticUntaggedPorts | read-create | current | The set of ports which are permanently configured to transmitting traffic for this VLAN as untagged frames. Each octet within this value specifies a set of eig… |
| 1.3.6.1.4.1.24062.2.2.17.5.2.2.1.5 | Columndot1qVlanStaticTaggedPorts | read-create | current | The set of ports which are permanently configured to transmitting traffic for this VLAN as tagged frames. Each octet within this value specifies a set of eight… |
| 1.3.6.1.4.1.24062.2.2.17.5.2.2.1.6 | Columndot1qVlanStaticRowStatus | read-create | current | This object is used to manage to creation and deletion of a VLAN, and is used to indicate the status of this entry. To Creating and activate a VLAN, first sele… |
| 1.3.6.1.4.1.24062.2.2.17.5.2.3 | Nodedot1qGvrp | |||
| 1.3.6.1.4.1.24062.2.2.17.5.2.3.1 | Scalardot1qGvrpStatus | read-write | current | Enable GVRP Protocol. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.3.2 | Tabledot1qPortGvrpTable | not-accessible | current | A table containing per port control and status information for GVRP configuration in the device. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.3.2.1 | Rowdot1qPortGvrpEntry | not-accessible | current | Information controlling GVRP configuration for a port on the device. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.3.2.1.1 | Columndot1qPortGvrpIndex | not-accessible | current | The port identifier. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.3.2.1.2 | Columndot1qPortGvrpStatus | read-write | current | The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this… |
| 1.3.6.1.4.1.24062.2.2.17.5.2.3.2.1.3 | Columndot1qPortGvrpRegistrationMode | read-write | current | Administrative controls |
| 1.3.6.1.4.1.24062.2.2.17.5.2.3.2.1.4 | Columndot1qPortGarpJoinTimer | read-write | current | The GARP Join timer, in centiseconds. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.3.2.1.5 | Columndot1qPortGarpLeaveTimer | read-write | current | The GARP Leave time, in centiseconds. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.3.2.1.6 | Columndot1qPortGarpLeaveAllTimer | read-write | current | The GARP LeaveAll time, in centiseconds. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.4 | Tabledot1qVlanCurrentTable | not-accessible | current | A table containing information about currently configured VLANs, either by (local or network) management, or dynamically created as a result of GVRP requests r… |
| 1.3.6.1.4.1.24062.2.2.17.5.2.4.1 | Rowdot1qVlanCurrentEntry | not-accessible | current | Information for a VLAN configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.4.1.1 | Columndot1qVlanCurrentIndex | read-only | current | The VLAN Identifier (VID) refering to this VLAN. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.4.1.2 | Columndot1qVlanCurrentEgressPorts | read-only | current | The set of ports which are transmitting traffic for this VLAN as either tagged or untagged frames. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.4.1.3 | Columndot1qVlanCurrentUntaggedPorts | read-only | current | The set of ports which are transmitting traffic for this VLAN as untagged frames. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.4.1.4 | Columndot1qVlanStatus | read-only | current | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the foll… |
| 1.3.6.1.4.1.24062.2.2.17.5.2.5 | Nodedot1qTunnel | |||
| 1.3.6.1.4.1.24062.2.2.17.5.2.5.1 | Scalardot1qTunnelEtherType | read-write | current | ethertype/TPID |
| 1.3.6.1.4.1.24062.2.2.17.5.2.5.2 | Tabledot1qTunnelPortTable | not-accessible | current | A table containing per tunnel access or uplink port information in the device. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.5.2.1 | Rowdot1qTunnelPortEntry | not-accessible | current | Information controlling tunnel configuration for a port on the device. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.5.2.1.1 | Columndot1qTunnelPortIndex | not-accessible | current | The port identifier. |
| 1.3.6.1.4.1.24062.2.2.17.5.2.5.2.1.2 | Columndot1qTunnelPortMode | read-write | current | Tunnel mode controls |
| 1.3.6.1.4.1.24062.2.2.17.5.3 | NodeprivateVlan | |||
| 1.3.6.1.4.1.24062.2.2.17.5.3.1 | TableprivateVlanIdTable | not-accessible | current | A table containing per Private VLAN ID information in the device. |
| 1.3.6.1.4.1.24062.2.2.17.5.3.1.1 | RowprivateVlanIdEntry | not-accessible | current | Information controlling Private VLAN ID configuration on the device. |
| 1.3.6.1.4.1.24062.2.2.17.5.3.1.1.1 | ColumnprivateVlanId | not-accessible | current | The Private VLAN ID. |
| 1.3.6.1.4.1.24062.2.2.17.5.3.1.1.2 | ColumnprivateVlanIdType | read-write | current | Private VLAN ID type controls |
| 1.3.6.1.4.1.24062.2.2.17.5.3.2 | TableprivateVlanPortTable | not-accessible | current | A table containing per Private VLAN Port information in the device. |
| 1.3.6.1.4.1.24062.2.2.17.5.3.2.1 | RowprivateVlanPortEntry | not-accessible | current | Information controlling Private VLAN Port configuration on the device. |
| 1.3.6.1.4.1.24062.2.2.17.5.3.2.1.1 | ColumnprivateVlanPortIndex | not-accessible | current | The Private Port Index. |
| 1.3.6.1.4.1.24062.2.2.17.5.3.2.1.2 | ColumnprivateVlanPortMode | read-write | current | Private VLAN Port mode controls |
| 1.3.6.1.4.1.24062.2.2.17.5.3.3 | TableprivateVlanHostAssociationTable | not-accessible | current | A table containing per Private VLAN host port association information in the device. |
| 1.3.6.1.4.1.24062.2.2.17.5.3.3.1 | RowprivateVlanHostAssociationEntry | not-accessible | current | Information controlling Private VLAN host port association configuration on the device. |
| 1.3.6.1.4.1.24062.2.2.17.5.3.3.1.1 | ColumnprivateVlanHostAssociationPortIndex | not-accessible | current | The Private Host Port Index. |
| 1.3.6.1.4.1.24062.2.2.17.5.3.3.1.2 | ColumnprivateVlanHostAssociationPrimaryVid | read-write | current | Private VLAN host Port association primary VLAN ID. If enter 0 then clear setting. |
| 1.3.6.1.4.1.24062.2.2.17.5.3.3.1.3 | ColumnprivateVlanHostAssociationSecondaryVid | read-write | current | Private VLAN host Port association secondary VLAN ID(isolated/community). If enter 0 then clear setting. |
| 1.3.6.1.4.1.24062.2.2.17.5.3.4 | TableprivateVlanMappingTable | not-accessible | current | A table containing per Private VLAN promiscuous port mapping information in the device. |
| 1.3.6.1.4.1.24062.2.2.17.5.3.4.1 | RowprivateVlanMappingEntry | not-accessible | current | Information controlling Private VLAN promiscuous port mapping configuration on the device. |
| 1.3.6.1.4.1.24062.2.2.17.5.3.4.1.1 | ColumnprivateVlanMappingPromiscuousPortIndex | not-accessible | current | The Private Promiscuous Port Index. |
| 1.3.6.1.4.1.24062.2.2.17.5.3.4.1.2 | ColumnprivateVlanMappingPrimaryVid | read-write | current | Private VLAN promiscuous Port mapping primary VLAN ID. If enter 0 then clear setting. |
| 1.3.6.1.4.1.24062.2.2.17.5.3.4.1.3 | ColumnprivateVlanMappingSecondaryVidList | read-write | current | Private VLAN promiscuous Port mapping secondary VLAN ID list. If enter zero-length string then clear setting. |
| 1.3.6.1.4.1.24062.2.2.17.6 | NodetrafficPrioritization | |||
| 1.3.6.1.4.1.24062.2.2.17.6.1 | ScalarqosPolicy | read-write | current | (1)8,4,2,1 weight round robin scheme: the switch will follow 8:4:2:1 rate to process priority queue from Hi to lowest queue. This approach prevents the lower p… |
| 1.3.6.1.4.1.24062.2.2.17.6.2 | TableqosPortDefaultCosTable | not-accessible | current | Table of descriptive information and configuration about port default cos value. |
| 1.3.6.1.4.1.24062.2.2.17.6.2.1 | RowqosPortDefaultCosEntry | not-accessible | current | An entry in the table, containing inforamtion about port default cos value. |
| 1.3.6.1.4.1.24062.2.2.17.6.2.1.1 | ColumnqosPortNum | read-only | current | Port number. |
| 1.3.6.1.4.1.24062.2.2.17.6.2.1.2 | ColumnqosPortTrust | read-write | current | Two kinds of priority information are token into consideration when a packet is processed. One is COS, the IEEE 802.3ac tag containing IEEE 802.1p priority inf… |
| 1.3.6.1.4.1.24062.2.2.17.6.2.1.3 | ColumnqosPortDefaultCos | read-write | current | The port priority will follow the default port priority |
| 1.3.6.1.4.1.24062.2.2.17.6.3 | TableqosCOSTable | not-accessible | current | Table of descriptive information and configuration about COS QOS. |
| 1.3.6.1.4.1.24062.2.2.17.6.3.1 | RowqosCOSEntry | not-accessible | current | An entry in the table, containing inforamtion about COS QOS. |
| 1.3.6.1.4.1.24062.2.2.17.6.3.1.1 | ColumnqosCOSPriority | read-only | current | COS priority. |
| 1.3.6.1.4.1.24062.2.2.17.6.3.1.2 | ColumnqosCOS | read-write | current | The port priority will follow the COS priority that you have assigned (0)low, (1)middle, (2)high, or (3)highest. |
| 1.3.6.1.4.1.24062.2.2.17.6.4 | TableqosDscpTable | not-accessible | current | Table of descriptive information and configuration about DSCP QOS. |
| 1.3.6.1.4.1.24062.2.2.17.6.4.1 | RowqosDscpEntry | not-accessible | current | An entry in the table, containing inforamtion about DSCP QOS. |
| 1.3.6.1.4.1.24062.2.2.17.6.4.1.1 | ColumnqosDscpPriority | read-only | current | Dscp priority. |
| 1.3.6.1.4.1.24062.2.2.17.6.4.1.2 | ColumnqosDscp | read-write | current | The port priority will follow the Dscp priority that you have assigned (0)low (1)middle, (2)high, (3)highest. |
| 1.3.6.1.4.1.24062.2.2.17.7 | NodemulticastFiltering | |||
| 1.3.6.1.4.1.24062.2.2.17.7.1 | NodeigmpQuery | |||
| 1.3.6.1.4.1.24062.2.2.17.7.1.1 | ScalarigmpQueryVersion | read-write | current | (1)IGMP Query version 1. (2)IGMP Query version 2. |
| 1.3.6.1.4.1.24062.2.2.17.7.1.2 | ScalarigmpQueryStatus | read-write | current | (1)enable IGMP Query on management vlan. (2)disable IGMP Query. |
| 1.3.6.1.4.1.24062.2.2.17.7.1.3 | ScalarigmpQueryInterval | read-write | current | The interval between General Queries sent by this Querier in seconds. |
| 1.3.6.1.4.1.24062.2.2.17.7.1.4 | ScalarigmpQueryMaxResponseTime | read-write | current | Max Respocse Time is meaningful only in Membership Query messages, and specifies the maximum allowed time before sending a responding report in seconds. |
| 1.3.6.1.4.1.24062.2.2.17.7.2 | NodeigmpSnooping | |||
| 1.3.6.1.4.1.24062.2.2.17.7.2.1 | ScalarigmpSnoopingStatus | read-write | current | Parameter to enable or disable IGMP snooping on the device. When enabled, the device will examine IGMP packets and set up filters for multicast traffic. The In… |
| 1.3.6.1.4.1.24062.2.2.17.7.2.2 | TableigmpSnoopingTable | not-accessible | current | Table of descriptive information about on which vlan is IGMP snooping enabled. |
| 1.3.6.1.4.1.24062.2.2.17.7.2.2.1 | RowigmpSnoopingEntry | not-accessible | current | Inforamtion enabling or disabling IGMP snooping on a vlan. |
| 1.3.6.1.4.1.24062.2.2.17.7.2.2.1.1 | ColumnigmpSnoopingEntryVID | read-only | current | The vlan id. |
| 1.3.6.1.4.1.24062.2.2.17.7.2.2.1.2 | ColumnigmpSnoopingEntryStatus | read-write | current | The state of igmp snooping functionality on a vlan. Set to enabled(1) indicates that igmp snooping is enabled on the vlan. When igmpSnoopingStatus is also turn… |
| 1.3.6.1.4.1.24062.2.2.17.7.2.3 | TableigmpSnoopingGroupTable | not-accessible | current | Table of descriptive information about IGMP snooped multicast groups. |
| 1.3.6.1.4.1.24062.2.2.17.7.2.3.1 | RowigmpSnoopingGroupEntry | not-accessible | current | Information containing a multicast group and its member ports. |
| 1.3.6.1.4.1.24062.2.2.17.7.2.3.1.1 | ColumnigmpSnoopingGroupEntryVID | read-only | current | The VLAN ID of an IGMP entry. |
| 1.3.6.1.4.1.24062.2.2.17.7.2.3.1.2 | ColumnigmpSnoopingGroupEntryIPAddr | read-only | current | The multicast group IP address. |
| 1.3.6.1.4.1.24062.2.2.17.7.2.3.1.3 | ColumnigmpSnoopingGroupEntryMembers | read-only | current | The member ports of the group. |
| 1.3.6.1.4.1.24062.2.2.17.7.3 | NodeunknownMulticast | |||
| 1.3.6.1.4.1.24062.2.2.17.7.3.1 | ScalarunknownMulticastStatus | read-write | current | Select IGMP Unknown Multicast policy. (1) Send to Query Ports: The device sends the packets with an unknown MAC/IP Multicast address to query ports (2) Discard… |
| 1.3.6.1.4.1.24062.2.2.17.7.4 | Nodedot1dGmrp | |||
| 1.3.6.1.4.1.24062.2.2.17.7.4.1 | Scalardot1dGmrpStatus | read-write | current | Enable GMRP Protocol. |
| 1.3.6.1.4.1.24062.2.2.17.7.4.2 | Tabledot1dPortGmrpTable | not-accessible | current | A table containing per port control and status information for GMRP configuration in the device. |
| 1.3.6.1.4.1.24062.2.2.17.7.4.2.1 | Rowdot1dPortGmrpEntry | not-accessible | current | Information controlling GMRP configuration for a port on the device. |
| 1.3.6.1.4.1.24062.2.2.17.7.4.2.1.1 | Columndot1dPortGmrpIndex | not-accessible | current | The port identifier. |
| 1.3.6.1.4.1.24062.2.2.17.7.4.2.1.2 | Columndot1dPortGmrpStatus | read-write | current | The state of GMRP operation on this port. The value enabled(1) indicates that GMRP is enabled on this port, as long as dot1dGmrpStatus is also enabled for this… |
| 1.3.6.1.4.1.24062.2.2.17.8 | Nodesnmp | |||
| 1.3.6.1.4.1.24062.2.2.17.8.1 | TablesnmpCommunityStringTable | not-accessible | current | Table of information configuring community strings of SNMP agent. An SNMP community string is a text string that acts as a password. It is used to authenticate… |
| 1.3.6.1.4.1.24062.2.2.17.8.1.1 | RowsnmpCommunityStringEntry | not-accessible | current | Inforamtion configuring an community string. |
| 1.3.6.1.4.1.24062.2.2.17.8.1.1.1 | ColumnsnmpCommunityStringIndex | not-accessible | current | Index of community string. |
| 1.3.6.1.4.1.24062.2.2.17.8.1.1.2 | ColumnsnmpCommunityStringName | read-write | current | A community string with maximum 32 characters. |
| 1.3.6.1.4.1.24062.2.2.17.8.1.1.3 | ColumnsnmpCommunityStringPrivilege | read-write | current | The access privilege of the community string. |
| 1.3.6.1.4.1.24062.2.2.17.8.1.1.4 | ColumnsnmpCommunityStringStatus | read-create | current | The status of this entry. Set to (5)createAndWait to create a new entry. A new entry or an active entry can be edited. Once an entry is modified, its status be… |
| 1.3.6.1.4.1.24062.2.2.17.8.2 | TablesnmpV3UserTable | not-accessible | current | Table of descriptive and information about trap servers. A trap server is the recipient of an SNMP trap. The device does not send a trap unless it knows to whi… |
| 1.3.6.1.4.1.24062.2.2.17.8.2.1 | RowsnmpV3UserEntry | not-accessible | current | An entry in the table, containing inforamtion about a trap server of SNMP agent. |
| 1.3.6.1.4.1.24062.2.2.17.8.2.1.1 | ColumnsnmpV3UserIndex | not-accessible | current | Index of snmp v3 user. |
| 1.3.6.1.4.1.24062.2.2.17.8.2.1.2 | ColumnsnmpV3UserName | read-write | current | |
| 1.3.6.1.4.1.24062.2.2.17.8.2.1.3 | ColumnsnmpV3UserSecurityLevel | read-write | current | Specifiy the authentication and privacy level - noauth(1) no authentication and no privacy. - auth(2) enables MD5 or SHA packet authentication. - priv(3) enabl… |
| 1.3.6.1.4.1.24062.2.2.17.8.2.1.4 | ColumnsnmpV3UserAuthProtocol | read-write | current | MD5(Message Digest 5) or SHA (Secure Hash Algorithm) |
| 1.3.6.1.4.1.24062.2.2.17.8.2.1.5 | ColumnsnmpV3UserAuthPassword | read-write | current | |
| 1.3.6.1.4.1.24062.2.2.17.8.2.1.6 | ColumnsnmpV3UserDesPassword | read-write | current | |
| 1.3.6.1.4.1.24062.2.2.17.8.2.1.7 | ColumnsnmpV3UserStatus | read-create | current | |
| 1.3.6.1.4.1.24062.2.2.17.8.3 | ScalarsnmpTrapServerEnable | read-write | current | To enable, disable snmp trap functionality. SNMPv1 traps are defined in RFC 1157, and SNMPv2c trap is defined as NOTIFICATION. SNMP traps enable this device to… |
| 1.3.6.1.4.1.24062.2.2.17.8.4 | TablesnmpTrapServerTable | not-accessible | current | Table of descriptive and information about trap servers. A trap server is the recipient of an SNMP trap. The device does not send a trap unless it knows to whi… |
| 1.3.6.1.4.1.24062.2.2.17.8.4.1 | RowsnmpTrapServerEntry | not-accessible | current | An entry in the table, containing inforamtion about a trap server of SNMP agent. |
| 1.3.6.1.4.1.24062.2.2.17.8.4.1.1 | ColumnsnmpTrapServerIndex | not-accessible | current | Index of trap server. |
| 1.3.6.1.4.1.24062.2.2.17.8.4.1.2 | ColumnsnmpTrapServerIPAddr | read-write | current | Trap Server IP Address. |
| 1.3.6.1.4.1.24062.2.2.17.8.4.1.3 | ColumnsnmpTrapServerTrapComm | read-write | current | The community string of trap server. The password-like string will be sent with the notification operation. |
| 1.3.6.1.4.1.24062.2.2.17.8.4.1.4 | ColumnsnmpTrapServerTrapVer | read-write | current | The trap version. |
| 1.3.6.1.4.1.24062.2.2.17.8.4.1.5 | ColumnsnmpTrapServerStatus | read-create | current | The status of this entry. Set to (5)createAndWait to create a new entry. A new entry or an active entry can be edited. Once an entry is modified, its status be… |
| 1.3.6.1.4.1.24062.2.2.17.10 | Nodewarning | |||
| 1.3.6.1.4.1.24062.2.2.17.10.1 | NodefaultRelay | |||
| 1.3.6.1.4.1.24062.2.2.17.10.1.1 | TablefaultRelayTable | not-accessible | current | Table of configuration about fault relay. A fault relay is able to control an output circuit which is triggered by management defined fault events. There are t… |
| 1.3.6.1.4.1.24062.2.2.17.10.1.1.1 | RowfaultRelayEntry | not-accessible | current | A entry controlling a fault relay configuration. |
| 1.3.6.1.4.1.24062.2.2.17.10.1.1.1.1 | ColumnfaultRelayId | read-only | current | Index of fault relay. |
| 1.3.6.1.4.1.24062.2.2.17.10.1.1.1.2 | ColumndiConfig | read-write | current | The fault relay will be triggered if digital input is low or high. |
| 1.3.6.1.4.1.24062.2.2.17.10.1.1.1.3 | ColumndryOutputConfig | read-write | current | The dry output mechanism of fault relay will be enabled or disable. |
| 1.3.6.1.4.1.24062.2.2.17.10.1.1.1.4 | ColumndryOutputOnPeriod | read-write | current | The fault relay will be closed after a period (in seconds). Together with dryOutputOffPeriod, the fault relay can be configured to continue on and off. |
| 1.3.6.1.4.1.24062.2.2.17.10.1.1.1.5 | ColumndryOutputOffPeriod | read-write | current | The fault relay will be opened after a period (in seconds). Together with dryOutputOnPeriod, the fault relay can be configured to continue on and off. |
| 1.3.6.1.4.1.24062.2.2.17.10.1.1.1.6 | ColumnpowerFailureConfig | read-write | current | The fault relay will be triggered if the configured power fails. Any means either power 1 or power2 fails |
| 1.3.6.1.4.1.24062.2.2.17.10.1.1.1.7 | ColumnlinkFailureConfig | read-write | current | The fault relay will be trigger if any of the configured links fails. |
| 1.3.6.1.4.1.24062.2.2.17.10.1.1.1.8 | ColumnpingFailureConfig | read-write | current | The ping failure mechanism of fault relay will be enabled or disable. |
| 1.3.6.1.4.1.24062.2.2.17.10.1.1.1.9 | ColumnpingFailureIP | read-write | current | The fault relay will be trigger if fail to ping the assigned IP address. |
| 1.3.6.1.4.1.24062.2.2.17.10.1.1.1.10 | ColumnpingFailureResetTime | read-write | current | Reset the ping process after pingResetTime, and then wait pingHoldTime to ping again. (optional) |
| 1.3.6.1.4.1.24062.2.2.17.10.1.1.1.11 | ColumnpingFailureHoldTime | read-write | current | Reset the ping process after pingResetTime, and then wait pingHoldTime to ping again. (optional) |
| 1.3.6.1.4.1.24062.2.2.17.10.1.1.1.12 | ColumnringFailureConfig | read-write | current | The fault relay will be triggered if the configured ring fails. |
| 1.3.6.1.4.1.24062.2.2.17.10.2 | NodeeventAndEmailWarning | |||
| 1.3.6.1.4.1.24062.2.2.17.10.2.1 | NodeeventSelection | |||
| 1.3.6.1.4.1.24062.2.2.17.10.2.1.1 | TablesystemEventTable | not-accessible | current | Table of descriptive information and controls the reactions to system events. Three types of reactions will be triggered: (1)logging in the switch or send logs… |
| 1.3.6.1.4.1.24062.2.2.17.10.2.1.1.1 | RowsystemEventEntry | read-only | current | An entry containing type of system events. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.1.1.1.1 | ColumneventSystemEventIndex | not-accessible | current | Index of events. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.1.1.1.2 | ColumneventDeviceColdStartEvent | read-write | current | Select which warning machanism to take place when the device cold starts. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.1.1.1.3 | ColumneventDeviceWarmStartEvent | read-write | current | Select which warning machanism to take place when the device warm starts. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.1.1.1.4 | ColumneventAuthenticationFailureEvent | read-write | current | Select which warning machanism to take place when authentication failure. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.1.1.1.5 | ColumneventRingEvent | read-write | current | Select which warning machanism to take place when ring event occured. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.1.1.1.6 | ColumneventPower1FailureEvent | read-write | current | Select which warning machanism to take place when POWER 1 failure. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.1.1.1.7 | ColumneventPower2FailureEvent | read-write | current | Select which warning machanism to take place when POWER 2 failure. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.1.1.1.8 | ColumneventFaultRelayEvent | read-write | current | Select which warning machanism to take place when a fault relay is triggered. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.1.1.1.9 | ColumneventTimeSynchronizeEvent | read-write | current | Select which warning machanism to take place when time synchronizatonn failed. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.1.1.1.10 | ColumneventDI1ChangeEvent | read-write | current | Select which warning machanism to take place when DI1 changed . |
| 1.3.6.1.4.1.24062.2.2.17.10.2.1.1.1.11 | ColumneventLoopDetectionEvent | read-write | current | Select which warning machanism to take place when loop detection event occured. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.1.2 | TableportEventTable | not-accessible | current | Table of descriptive information and controls the reactions to port link up, link down, or both link up and down. Three types of reactions will be triggered: (… |
| 1.3.6.1.4.1.24062.2.2.17.10.2.1.2.1 | RowportEventEntry | not-accessible | current | An entry controlling the type of port events. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.1.2.1.1 | ColumneventPortNumber | read-only | current | Port number. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.1.2.1.2 | ColumneventPortEvent | read-write | current | Select the port event to react to. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.2 | NodesysLogConfiguration | |||
| 1.3.6.1.4.1.24062.2.2.17.10.2.2.1 | ScalarsysLogLocalStatus | read-write | current | Parameter to configure if the log should to be kept in the device or not. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.2.2 | ScalarsysLogRemoteStatus | read-write | current | Parameter to configure the log should be sent to a syslog server specified in sysLogServerAddr or not. When disabled or sysLogServerAddr is 0, the device will … |
| 1.3.6.1.4.1.24062.2.2.17.10.2.2.3 | ScalarsysLogServerAddr | read-write | current | The IP address of syslog server. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.3 | NodesmtpConfiguration | |||
| 1.3.6.1.4.1.24062.2.2.17.10.2.3.1 | ScalareventEmailAlertStatus | read-write | current | Parameter to enable the email alert feature, When enabled, the switch will send an email to the address presented in emailAlertRcptTable. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.3.2 | ScalareventEmailAlertServer | read-write | current | The IP address of SMTP server. It can't be modified when eventEmailAlertStatus is disabled. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.3.3 | ScalareventEmailAlertAccount | read-write | current | The email account for SMTP server. It can't be modified when eventEmailAlertAuthentication is disabled. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.3.4 | ScalareventEmailAlertAuthentication | read-write | current | Set to (1)enabled if it needs authentication to connect to the SMTP server. It can't be modified when eventEmailAlertStatus is disabled. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.3.5 | ScalareventEmailAlertUser | read-write | current | The email account for SMTP server. It can't be modified when eventEmailAlertAuthentication is disabled. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.3.6 | ScalareventEmailAlertPassword | write-only | current | The password of email account. It can't be modified when eventEmailAlertAuthentication is disabled. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.3.7 | TableemailAlertRcptTable | not-accessible | current | Table configuring recipient email addresses. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.3.7.1 | RowemailAlertRcptEntry | not-accessible | current | An entry containing recipient email address. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.3.7.1.1 | ColumneventEmailAlertRcptIndex | not-accessible | current | Index of recipient Email address. |
| 1.3.6.1.4.1.24062.2.2.17.10.2.3.7.1.2 | ColumneventEmailAlertRcptEmailAddr | read-write | current | A recipient email address. |
| 1.3.6.1.4.1.24062.2.2.17.11 | NodemonitorandDiag | |||
| 1.3.6.1.4.1.24062.2.2.17.11.1 | NodemacAddressTable | |||
| 1.3.6.1.4.1.24062.2.2.17.11.1.1 | TablemacAddrTable | not-accessible | current | A table containing information about unicast or multicast MAC addresses that currently learned, configured by management or IGMP snooping. |
| 1.3.6.1.4.1.24062.2.2.17.11.1.1.1 | RowmacAddrEntry | not-accessible | current | An entry containing inforamtion about a MAC address entry. |
| 1.3.6.1.4.1.24062.2.2.17.11.1.1.1.1 | ColumnmacAddressAddr | read-write | current | MAC address of the entry. |
| 1.3.6.1.4.1.24062.2.2.17.11.1.1.1.2 | ColumnmacAddressType | read-write | current | The type of this entry. dynamicUnicast(1) - unicast address that learned from source address of ingress frames. staticUnicast(2) - unicast address that configu… |
| 1.3.6.1.4.1.24062.2.2.17.11.1.1.1.3 | ColumnmacAddressPortList | read-write | current | The port list, which must be valid when creating a new entry. |
| 1.3.6.1.4.1.24062.2.2.17.11.1.1.1.4 | ColumnmacAddressVlanId | read-write | current | The VLAN where the mac address learned from or configured to. |
| 1.3.6.1.4.1.24062.2.2.17.11.1.1.1.5 | ColumnmacAddressStatus | read-create | current | This object is used to manage to creation and deletion of a static entry, and is used to indicate the status of an entry. To Creating a static entry, select a … |
| 1.3.6.1.4.1.24062.2.2.17.11.1.2 | ScalarmacAddrTableClear | read-write | current | Set to clear for cleaning all the dynamic MAC entries in the MAC address table. |
| 1.3.6.1.4.1.24062.2.2.17.11.1.3 | ScalarmacAddrTableAgingTime | read-write | current | This value determines the interval that an automatic learned MAC address entry remains valid in the forwarding database, since its last access as a source addr… |
| 1.3.6.1.4.1.24062.2.2.17.11.2 | NodeportStatistic | |||
| 1.3.6.1.4.1.24062.2.2.17.11.2.1 | TableswitchPortStatTable | not-accessible | current | Table of descriptive and statistics information about each switch ports. |
| 1.3.6.1.4.1.24062.2.2.17.11.2.1.1 | RowswitchPortStatEntry | not-accessible | current | An entry in the table containing descriptive information and statistics of a port. |
| 1.3.6.1.4.1.24062.2.2.17.11.2.1.1.1 | ColumnswPortStatIndex | not-accessible | current | Index of port statistic table. |
| 1.3.6.1.4.1.24062.2.2.17.11.2.1.1.2 | ColumnswPortStatType | read-only | current | Indicates the port type. |
| 1.3.6.1.4.1.24062.2.2.17.11.2.1.1.3 | ColumnswPortStatLink | read-only | current | Indicates the link state. |
| 1.3.6.1.4.1.24062.2.2.17.11.2.1.1.4 | ColumnswPortStatState | read-only | current | Indicates the port state. |
| 1.3.6.1.4.1.24062.2.2.17.11.2.1.1.5 | ColumnswPortStatRXGoodPkt | read-only | current | The count of good frames received, which is the total number of recieved unicast, broadcast, multicast and pause frames. |
| 1.3.6.1.4.1.24062.2.2.17.11.2.1.1.6 | ColumnswPortStatRXBadPkt | read-only | current | The count of bad frames received, which is the total number of undersize, fragment, oversize, jabber, RXErr and FCSErr frames. |
| 1.3.6.1.4.1.24062.2.2.17.11.2.1.1.7 | ColumnswPortStatRXAbortPkt | read-only | current | The count of abort frames when receive, which is the total number of discarded and filtered frames. |
| 1.3.6.1.4.1.24062.2.2.17.11.2.1.1.8 | ColumnswPortStatTXGoodPkt | read-only | current | The count of good frames transmitted, which is the total number of transmitted unicast, broadcast, multicast and pause frames. |
| 1.3.6.1.4.1.24062.2.2.17.11.2.1.1.9 | ColumnswPortStatTXBadPkt | read-only | current | The count of FCSErr frames when transmit. |
| 1.3.6.1.4.1.24062.2.2.17.11.2.1.1.10 | ColumnswPortStatPacketCollision | read-only | current | The count of collision. |
| 1.3.6.1.4.1.24062.2.2.17.11.2.2 | ScalarswitchPortStatClear | write-only | current | Set to clear(1) to clear all information in the statistics table. |
| 1.3.6.1.4.1.24062.2.2.17.11.3 | Nodeportmirroring | |||
| 1.3.6.1.4.1.24062.2.2.17.11.3.1 | ScalarportMirrorStatus | read-write | current | To enable or disable port mirroring. Port mirroring is used to send a copy of inbound or outbound network packets seen on one port to another switch port. Admi… |
| 1.3.6.1.4.1.24062.2.2.17.11.3.2 | ScalarportMirrorDestinationPortTX | read-write | current | The TX destination port (sniffer port). Destination port can be used to see all monitor port traffic. You can connect sniffer port to a LAN analysier or netxra… |
| 1.3.6.1.4.1.24062.2.2.17.11.3.3 | ScalarportMirrorDestinationPortRX | read-write | current | The RX destination port (sniffer port). Destination port can be used to see all monitor port traffic. You can connect sniffer port to a LAN analysier or netxra… |
| 1.3.6.1.4.1.24062.2.2.17.11.3.4 | TableportMirrorSourceTable | not-accessible | current | Table of descriptive information and configuration of port mirroring in this system. Use this table to select monitor port for this switch. |
| 1.3.6.1.4.1.24062.2.2.17.11.3.4.1 | RowportMirrorSourceEntry | not-accessible | current | Information configuring port mirroring on each port. |
| 1.3.6.1.4.1.24062.2.2.17.11.3.4.1.1 | ColumnportMirrorPortNum | read-only | current | The Port number. |
| 1.3.6.1.4.1.24062.2.2.17.11.3.4.1.2 | ColumnportMirrorSourcePort | read-write | current | The mode of source port (monitor port). (1) TX only. (2) RX only. (3) RX and TX. (4) Source port is disabled. The ports you want to monitor. All source port tr… |
| 1.3.6.1.4.1.24062.2.2.17.11.4 | NodeeventLog | |||
| 1.3.6.1.4.1.24062.2.2.17.11.4.1 | TableeventLogTable | not-accessible | current | Table of descriptive information about logs. |
| 1.3.6.1.4.1.24062.2.2.17.11.4.1.1 | RoweventLogEntry | not-accessible | current | An entry in the table containing a log. |
| 1.3.6.1.4.1.24062.2.2.17.11.4.1.1.1 | ColumneventLogIndex | read-only | current | Index of log. |
| 1.3.6.1.4.1.24062.2.2.17.11.4.1.1.2 | ColumneventLogDescription | read-only | current | The description of a log. |
| 1.3.6.1.4.1.24062.2.2.17.11.5 | NodetopologyDiscovery | |||
| 1.3.6.1.4.1.24062.2.2.17.11.5.1 | ScalarlldpRun | read-write | current | LLDP Enable/Disable |
| 1.3.6.1.4.1.24062.2.2.17.11.5.2 | ScalarlldpTimer | read-write | current | The transmission frequency of LLDP in seconds |
| 1.3.6.1.4.1.24062.2.2.17.11.5.3 | ScalarlldpHoldTime | read-write | current | The transmission frequency of LLDP in seconds |
| 1.3.6.1.4.1.24062.2.2.17.11.5.4 | TablelldpNeighborTable | not-accessible | current | A table containing LLDP neighbors information |
| 1.3.6.1.4.1.24062.2.2.17.11.5.4.1 | RowlldpNeighborEntry | not-accessible | current | An entry containing inforamtion about a LLDP neighbor entry. |
| 1.3.6.1.4.1.24062.2.2.17.11.5.4.1.1 | ColumnlldpNeighborLocalPort | read-only | current | Local port of LLDP Neighbor |
| 1.3.6.1.4.1.24062.2.2.17.11.5.4.1.2 | ColumnlldpNeighborMacAddress | read-only | current | MAC address of LLDP Neighbor |
| 1.3.6.1.4.1.24062.2.2.17.11.5.4.1.3 | ColumnlldpNeighborIpAddress | read-only | current | IP address of LLDP Neighbor |
| 1.3.6.1.4.1.24062.2.2.17.11.5.4.1.4 | ColumnlldpNeighborVID | read-only | current | VLAN ID of LLDP Neighbor |
| 1.3.6.1.4.1.24062.2.2.17.11.5.4.1.5 | ColumnlldpNeighborTTL | read-only | current | TTL of LLDP Neighbor |
| 1.3.6.1.4.1.24062.2.2.17.12 | Nodesave | |||
| 1.3.6.1.4.1.24062.2.2.17.12.1 | ScalarsaveCfgMgtAction | read-write | current | Setting this object to active(1) saves current configuration. Setting this object to notActive(2) has no effect. The system always returns the value notActive(… |
| 1.3.6.1.5 | Nodesecurity | |||
| 1.3.6.1.5.1 | NodeportSecurity | |||
| 1.3.6.1.5.1.1 | TableportSecurityStatusTable | not-accessible | current | A table containing information about port security status on each port. Port security prevents a port from address learning. Only those MAC addresses that are … |
| 1.3.6.1.5.1.1.1 | RowportSecurityStatusEntry | not-accessible | current | An entry configuring port security for a port. |
| 1.3.6.1.5.1.1.1.1 | ColumnportSecurityPortIndex | not-accessible | current | The port id. |
| 1.3.6.1.5.1.1.1.2 | ColumnportSecurityPortStatus | read-write | current | (1)enable port security on this port. (2)disable port security on this port. |
| 1.3.6.1.5.1.2 | TableportSecurityMacTable | not-accessible | current | Table configuring static unicast MAC address for each port. When you add a static MAC address, it remains in the switch's address table, regardless of whether … |
| 1.3.6.1.5.1.2.1 | RowportSecurityMacEntry | not-accessible | current | An entry configuring a static unicast MAC addresses on a port. |
| 1.3.6.1.5.1.2.1.1 | ColumnportSecurityMacIndex | not-accessible | current | Index of MAC. |
| 1.3.6.1.5.1.2.1.2 | ColumnportSecurityPort | read-write | current | The port id. |
| 1.3.6.1.5.1.2.1.3 | ColumnportSecurityVlanIndex | read-write | current | The vlan id where the MAC address belongs to. |
| 1.3.6.1.5.1.2.1.4 | ColumnportSecurityMac | read-write | current | MAC address of the entry. |
| 1.3.6.1.5.1.2.1.5 | ColumnportSecurityMacStatus | read-create | current | The status of this entry. Set to (5)createAndWait to create a new entry. A new entry or an active entry can be edited. Once an entry is modified, its status be… |
| 1.3.6.1.5.2 | NodeipSecurity | |||
| 1.3.6.1.5.2.1 | ScalaripSecurityStatus | read-write | current | Enable or disable IP security functionality. IP security allows you to assign specific IP addresses that are permitted to access the device for securing switch… |
| 1.3.6.1.5.2.2 | TableipSecurityTable | not-accessible | current | Table configuring IP addresses that can access and manage the device through network, such as telnet, web or SNMP. Please note that enabling IP security functi… |
| 1.3.6.1.5.2.2.1 | RowipSecurityEntry | not-accessible | current | An entry configuring an security IP address. |
| 1.3.6.1.5.2.2.1.1 | ColumnipSecurityIndex | not-accessible | current | Index of IP address entry. |
| 1.3.6.1.5.2.2.1.2 | ColumnipSecurityIP | read-write | current | An IP address that can access and manage the device. |
| 1.3.6.1.5.2.2.1.3 | ColumnipSecurityRowStatus | read-create | current | This object is used to manage to creation and deletion of a authorized IP address, and is used to indicate the status of this entry. A empty entry or an active… |
| 1.3.6.1.5.3 | Nodedot1x | |||
| 1.3.6.1.5.3.1 | Scalardot1xStatus | read-write | current | IEEE802.1x protocol function status. (1) IEEE802.1x protocol function is enabled. (2) IEEE802.1x protocol function is disabled. 802.1x makes use of the physica… |
| 1.3.6.1.5.3.2 | Scalardot1xAuthentication | read-write | current | . |
| 1.3.6.1.5.3.3 | TableradiusServerTable | not-accessible | current | . |
| 1.3.6.1.5.3.3.1 | RowradiusServerEntry | not-accessible | current | . |
| 1.3.6.1.5.3.3.1.1 | ColumnradiusServerIndex | not-accessible | current | Index of Radius server configuration. |
| 1.3.6.1.5.3.3.1.2 | ColumnradiusServerIp | read-write | current | IP address of this radius server. |
| 1.3.6.1.5.3.3.1.3 | ColumnradiusServerServerPort | read-write | current | The UDP port number used by the authentication server to authenticate. |
| 1.3.6.1.5.3.3.1.4 | ColumnradiusServerAccountingPort | read-write | current | Accounting Port: The UDP port number used by the authentication server to retrieve accounting information. |
| 1.3.6.1.5.3.3.1.5 | ColumnradiusServerSharedKey | read-write | current | A key shared between this switch and authentication server. |
| 1.3.6.1.5.3.4 | Tabledot1xLocalUserTable | not-accessible | current | . |
| 1.3.6.1.5.3.4.1 | Rowdot1xLocalUserEntry | not-accessible | current | . |
| 1.3.6.1.5.3.4.1.1 | Columndot1xLocalUserIndex | not-accessible | current | . |
| 1.3.6.1.5.3.4.1.2 | Columndot1xLocalUserName | read-write | current | set this field to empty to remove this user config. |
| 1.3.6.1.5.3.4.1.3 | Columndot1xLocalUserPassword | read-write | current | . |
| 1.3.6.1.5.3.4.1.4 | Columndot1xLocalUserVid | read-write | current | . |
| 1.3.6.1.5.3.5 | Tabledot1xPortConfigTable | not-accessible | current | . |
| 1.3.6.1.5.3.5.1 | Rowdot1xPortConfigEntry | not-accessible | current | . |
| 1.3.6.1.5.3.5.1.1 | Columndot1xPortConfigIndex | not-accessible | current | . |
| 1.3.6.1.5.3.5.1.2 | Columndot1xPortAuthControl | read-write | current | . |
| 1.3.6.1.5.3.5.1.3 | Columndot1xPortReauthentication | read-write | current | . |
| 1.3.6.1.5.3.5.1.4 | Columndot1xPortMaxRequest | read-write | current | . |
| 1.3.6.1.5.3.5.1.5 | Columndot1xPortGuestVlan | read-write | current | . |
| 1.3.6.1.5.3.5.1.6 | Columndot1xPortHostMode | read-write | current | . |
| 1.3.6.1.5.3.5.1.7 | Columndot1xPortAdminDirection | read-write | current | . |
| 1.3.6.1.5.3.5.1.8 | Columndot1xPortConfigSetDefault | read-write | current | . |
| 1.3.6.1.5.3.5.1.9 | Columndot1xPortReinitialize | read-write | current | . |
| 1.3.6.1.5.3.5.1.10 | Columndot1xPortClientReauth | write-only | current | . |
| 1.3.6.1.5.3.6 | Tabledot1xPortTimeoutConfigTable | not-accessible | current | . |
| 1.3.6.1.5.3.6.1 | Rowdot1xPortTimeoutConfigEntry | not-accessible | current | . |
| 1.3.6.1.5.3.6.1.1 | Columndot1xPortTimeoutIndex | not-accessible | current | . |
| 1.3.6.1.5.3.6.1.2 | Columndot1xPortReauthPeriod | read-write | current | . |
| 1.3.6.1.5.3.6.1.3 | Columndot1xPortQuietPeriod | read-write | current | . |
| 1.3.6.1.5.3.6.1.4 | Columndot1xPortTxPeriod | read-write | current | . |
| 1.3.6.1.5.3.6.1.5 | Columndot1xPortSupplicantTimeout | read-write | current | . |
| 1.3.6.1.5.3.6.1.6 | Columndot1xPortServerTimeout | read-write | current | . |
| 1.3.6.1.5.3.7 | Tabledot1xPortStatusTable | not-accessible | current | . |
| 1.3.6.1.5.3.7.1 | Rowdot1xPortStatusEntry | not-accessible | current | . |
| 1.3.6.1.5.3.7.1.1 | Columndot1xPortStatusIndex | not-accessible | current | . |
| 1.3.6.1.5.3.7.1.2 | Columndot1xPortCtrl | read-only | current | . |
| 1.3.6.1.5.3.7.1.3 | Columndot1xPortAuthStatus | read-only | current | . |
| 1.3.6.1.5.3.7.1.4 | Columndot1xPortAuthSupplicant | read-only | current | . |
| 1.3.6.1.5.3.7.1.5 | Columndot1xPortOperDirection | read-only | current | . |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AlertType | INTEGER { enable(1), disable(2) } | current |