Juniper-DOS-PROTECTION-MIB
79 objects
The DOS Protection MIB for the Juniper E-Series product family. This MIB contains managed objects for the DOS Protection application. Management objects are provided to control and monitor the DOS protection application.
Imported Objects
| IF-MIB | InterfaceIndex |
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniEnable |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.80 | IdentityjuniDosProtectionMIB | The DOS Protection MIB for the Juniper E-Series product family. This MIB contains managed objects for the DOS Protection application. Management objects are pr… | ||
| 1.3.6.1.4.1.4874.2.2.80.1 | NodejuniDosProtectionObjects | |||
| 1.3.6.1.4.1.4874.2.2.80.1.1 | NodejuniDosProtectionScfdsGroup | |||
| 1.3.6.1.4.1.4874.2.2.80.1.1.1 | ScalarjuniDosProtectionScfdsGlobalState | read-write | current | Controls whether the suspicious control flow detection system is enabled or disabled. Setting the value to enable(1) enables the suspicious control flow detect… |
| 1.3.6.1.4.1.4874.2.2.80.1.1.2 | ScalarjuniDosProtectionScfdsGlobalGrouping | read-write | current | When set to enable(1), the suspicious flow control system will group flows when resources are unavailable to treat each suspicious flow individually. When set … |
| 1.3.6.1.4.1.4874.2.2.80.1.1.3 | ScalarjuniDosProtectionScfdsGlobalClearAll | read-write | current | When set to clear(1), the suspicious control flow detection system is cleared. When set to ok(0), there is no effect and the suspicious control flow detection … |
| 1.3.6.1.4.1.4874.2.2.80.1.1.4 | ScalarjuniDosProtectionScfdsGlobalDiscontinuityTime | read-only | current | The sysUpTime at which the counters were last re-initialized on any slot due to a restart. |
| 1.3.6.1.4.1.4874.2.2.80.1.1.5 | ScalarjuniDosProtectionScfdsGlobalTableOverflowState | read-only | current | Indicates whether any module in the system is in under a resource shortage situation. A value of notOverflowingOrGrouping(1) indicates that there is no resourc… |
| 1.3.6.1.4.1.4874.2.2.80.1.1.6 | ScalarjuniDosProtectionScfdsGlobalCurrentSuspiciousFlows | read-only | current | The number of flows currently marked as suspicious. |
| 1.3.6.1.4.1.4874.2.2.80.1.1.7 | ScalarjuniDosProtectionScfdsGlobalNumberSuspiciousFlows | read-only | current | The number of suspicious flows seen since system restart. |
| 1.3.6.1.4.1.4874.2.2.80.1.1.8 | ScalarjuniDosProtectionScfdsGlobalCurrentSuspiciousFlowGroups | read-only | current | The number of flow groups currently marked as suspicious. |
| 1.3.6.1.4.1.4874.2.2.80.1.1.9 | ScalarjuniDosProtectionScfdsGlobalNumberSuspiciousFlowGroups | read-only | current | The number of suspicius flow groups seen since system restart. |
| 1.3.6.1.4.1.4874.2.2.80.1.1.10 | ScalarjuniDosProtectionScfdsGlobalCurrentFalseNegativeFlows | read-only | current | The number of flows currently falsely considered suspicious. A false negative indicates that the flow was seen as possibly suspicious, but did not pass all the… |
| 1.3.6.1.4.1.4874.2.2.80.1.1.11 | ScalarjuniDosProtectionScfdsGlobalNumberFalseNegativeFlows | read-only | current | The number of flows falsely considered possibly suspicious seen since system restart. |
| 1.3.6.1.4.1.4874.2.2.80.1.1.12 | ScalarjuniDosProtectionScfdsGlobalNumberTableOverflows | read-only | current | The total number of times the system had a table overflow on any slot. |
| 1.3.6.1.4.1.4874.2.2.80.1.1.13 | TablejuniDosProtectionScfdsProtocolTable | not-accessible | current | The information for the DOS protection control protocols. |
| 1.3.6.1.4.1.4874.2.2.80.1.1.13.1 | RowjuniDosProtectionScfdsProtocolEntry | not-accessible | current | The information for an individual DOS protection control protocol. |
| 1.3.6.1.4.1.4874.2.2.80.1.1.13.1.1 | ColumnjuniDosProtectionScfdsProtocolIndex | not-accessible | current | The control protocol value for this entry. |
| 1.3.6.1.4.1.4874.2.2.80.1.1.13.1.2 | ColumnjuniDosProtectionScfdsProtocolThreshold | read-write | current | The threshold in packets per second for this control protocol. This is the rate at which a flow for this protocol is considered suspicious. Setting this object… |
| 1.3.6.1.4.1.4874.2.2.80.1.1.13.1.3 | ColumnjuniDosProtectionScfdsProtocolLowThreshold | read-write | current | The low threshold in packets per second for this control protocol . This is the rate at which a flow must fall below to in order return to the normal state, af… |
| 1.3.6.1.4.1.4874.2.2.80.1.1.13.1.4 | ColumnjuniDosProtectionScfdsProtocolBackoffTime | read-write | current | The backoff time in seconds. A flow which is considered suspicious will be returned to normal after this amount of time regardless of the current rate of the f… |
| 1.3.6.1.4.1.4874.2.2.80.1.1.13.1.5 | ColumnjuniDosProtectionScfdsProtocolState | read-only | current | The current state of the protocol. This object will return inTrouble(2) if any module in the system has reported that the protocol is currently being watched f… |
| 1.3.6.1.4.1.4874.2.2.80.1.1.13.1.6 | ColumnjuniDosProtectionScfdsProtocolTransitions | read-only | current | The number of transitions to 'inTrouble' that this control protocol has made. |
| 1.3.6.1.4.1.4874.2.2.80.1.2 | NodejuniDosProtectionDpgGroup | |||
| 1.3.6.1.4.1.4874.2.2.80.1.2.1 | TablejuniDosProtectionDpgTable | not-accessible | current | The information for a dos-protection-group. A dos-protection-group defines a set of parameters that manage the handling of control protocols on the router. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.1.1 | RowjuniDosProtectionDpgEntry | not-accessible | current | The information for an individual dos-protection-group. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.1.1.1 | ColumnjuniDosProtectionDpgIndex | not-accessible | current | The dos-protection-group-name for this entry. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.1.1.2 | ColumnjuniDosProtectionDpgRowStatus | read-create | current | Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET. When read this always returns a value of active |
| 1.3.6.1.4.1.4874.2.2.80.1.2.1.1.3 | ColumnjuniDosProtectionDpgCanned | read-create | current | Sets the default values based for the dos-protection-group based on the values from the canned group. Can only be used to set a different group. Using the curr… |
| 1.3.6.1.4.1.4874.2.2.80.1.2.1.1.4 | ColumnjuniDosProtectionDpgRevert | read-create | current | Revert this dos-protection-group to the canned values of the associated canned group by setting this object to revert(1). Reading this object will always retur… |
| 1.3.6.1.4.1.4874.2.2.80.1.2.1.1.5 | ColumnjuniDosProtectionDpgModified | read-only | current | When true is returned, some protocol or priority associated with this dos-protection-group, has been modified from the canned values associated with the group.… |
| 1.3.6.1.4.1.4874.2.2.80.1.2.1.1.6 | ColumnjuniDosProtectionDpgReferences | read-only | current | The number of references for this dos-protection-group. References include the number of interfaces currently associated with the group, as well as the number … |
| 1.3.6.1.4.1.4874.2.2.80.1.2.2 | TablejuniDosProtectionDpgProtocolTable | not-accessible | current | The information for the dos-protection-group control protocol table. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.2.1 | RowjuniDosProtectionDpgProtocolEntry | not-accessible | current | The information for an individual dos-protection-group control protocol entry. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.2.1.1 | ColumnjuniDosProtectionDpgProtocolName | not-accessible | current | The dos-protection-group name for this entry. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.2.1.2 | ColumnjuniDosProtectionDpgProtocolProtocol | not-accessible | current | The dos-protection-group control protocol for this entry. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.2.1.3 | ColumnjuniDosProtectionDpgProtocolBurst | read-write | current | The burst in packets for this control protocol in this dos-protection-group. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.2.1.4 | ColumnjuniDosProtectionDpgProtocolDropProbability | read-write | current | The drop probability for suspect packets for this control protocol in this dos-protection-group. This is probability that a packet belonging to a suspicious fl… |
| 1.3.6.1.4.1.4874.2.2.80.1.2.2.1.5 | ColumnjuniDosProtectionDpgProtocolRate | read-write | current | The rate in packets per second for this control protocol in this dos-protection-group. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.2.1.6 | ColumnjuniDosProtectionDpgProtocolSkipPriorityRateLimiter | read-write | current | When set to enable, this control protocol in this dos-protection-group will skip the priority rate limiter. When set to disable, the protocol will not skip the… |
| 1.3.6.1.4.1.4874.2.2.80.1.2.2.1.7 | ColumnjuniDosProtectionDpgProtocolWeight | read-write | current | The weight of this control protocol against others of the same priority in this dos-protection-group. The weight is used to determine the minimum rate and burs… |
| 1.3.6.1.4.1.4874.2.2.80.1.2.2.1.8 | ColumnjuniDosProtectionDpgProtocolPriority | read-write | current | The priority for the control protocol. Packets of this control protocol on interfaces referencing this dos-protection-group will be categorized into the priori… |
| 1.3.6.1.4.1.4874.2.2.80.1.2.2.1.9 | ColumnjuniDosProtectionDpgProtocolModified | read-only | current | When true is returned, the values for this control protocol in this dos-protection-group have been modified from the canned values associated with the group. W… |
| 1.3.6.1.4.1.4874.2.2.80.1.2.2.1.10 | ColumnjuniDosProtectionDpgProtocolDestination | read-only | current | The destination processor for packets of this control protocol. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.3 | TablejuniDosProtectionDpgPriorityTable | not-accessible | current | The information for a dos-protection-group priority table. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.3.1 | RowjuniDosProtectionDpgPriorityEntry | not-accessible | current | The information for an individual dos-protection-group priority table |
| 1.3.6.1.4.1.4874.2.2.80.1.2.3.1.1 | ColumnjuniDosProtectionDpgPriorityName | not-accessible | current | The dos-proteciton-group name for this entry. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.3.1.2 | ColumnjuniDosProtectionDpgPriorityPriority | not-accessible | current | The priority for this entry. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.3.1.3 | ColumnjuniDosProtectionDpgPriorityBurst | read-write | current | The burst in packets for this priority in this dos-protection-group. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.3.1.4 | ColumnjuniDosProtectionDpgPriorityOverSubscriptionFactor | read-write | current | The over-subscription factor for this priority in this dos-protection-group. This is used when calculating the minimum rates for control protocols that use thi… |
| 1.3.6.1.4.1.4874.2.2.80.1.2.3.1.5 | ColumnjuniDosProtectionDpgPriorityRate | read-write | current | The rate in packets per second for this priority in this dos-protection-group. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.3.1.6 | ColumnjuniDosProtectionDpgPriorityModified | read-only | current | When true is returned, the values for this priority in this dos-protection-group have been modified from the canned values associated with the group. When fals… |
| 1.3.6.1.4.1.4874.2.2.80.1.2.4 | TablejuniDosProtectionDpgAttachTable | not-accessible | current | The information for the DOS protection attachment table. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.4.1 | RowjuniDosProtectionDpgAttachEntry | not-accessible | current | The information for an individual DOS protection attachment entry. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.4.1.1 | ColumnjuniDosProtectionDpgAttachIndex | not-accessible | current | The interface index for the attachment. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.4.1.2 | ColumnjuniDosProtectionDpgAttachRowStatus | read-create | current | Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET. When read this always returns a value of active |
| 1.3.6.1.4.1.4874.2.2.80.1.2.4.1.3 | ColumnjuniDosProtectionDpgAttachName | read-create | current | The dos-protection-group for this entry. This is the dos-protection-group that is use by the interface. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.4.1.4 | ColumnjuniDosProtectionDpgAttachConfigured | read-create | current | Indicates the configured status of the attachment. This object returns true when the attachment was statically configured, and returns false when the attachmen… |
| 1.3.6.1.4.1.4874.2.2.80.1.2.5 | TablejuniDosProtectionDpgProfileTable | not-accessible | current | The information for the DOS protection profile table. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.5.1 | RowjuniDosProtectionDpgProfileEntry | not-accessible | current | The information for an individual DOS protection profile entry. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.5.1.1 | ColumnjuniDosProtectionDpgProfileProfileId | not-accessible | current | The profile ID for the profile entry. The profile ID identifies which profile is being accessed. A value for this identifier is determined by locating or creat… |
| 1.3.6.1.4.1.4874.2.2.80.1.2.5.1.2 | ColumnjuniDosProtectionDpgProfileLayerId | not-accessible | current | The layer ID for the profile entry. The layer ID indicates which interface type is being accessed. |
| 1.3.6.1.4.1.4874.2.2.80.1.2.5.1.3 | ColumnjuniDosProtectionDpgProfileRowStatus | read-create | current | Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET. When read this always returns a value of active |
| 1.3.6.1.4.1.4874.2.2.80.1.2.5.1.4 | ColumnjuniDosProtectionDpgProfileName | read-create | current | The dos-protection-group that is associated with this profile/interface-type. This profile will be attached when dynamic instances of the interface type are cr… |
| 1.3.6.1.4.1.4874.2.2.80.4 | NodejuniDosProtectionMIBConformance | |||
| 1.3.6.1.4.1.4874.2.2.80.4.1 | NodejuniDosProtectionMIBCompliances | |||
| 1.3.6.1.4.1.4874.2.2.80.4.1.1 | CompliancejuniDosProtectionCompliance | obsolete | The compliance statement for entities which implement the Juniper Dos Protection MIB. This was made obsolete with the addition of dos-protection-groups. | |
| 1.3.6.1.4.1.4874.2.2.80.4.1.2 | CompliancejuniDosProtectionCompliance2 | current | The compliance statement for entities which implement the Juniper Dos Protection MIB. | |
| 1.3.6.1.4.1.4874.2.2.80.4.2 | NodejuniDosProtectionMIBGroups | |||
| 1.3.6.1.4.1.4874.2.2.80.4.2.1 | GroupjuniDosProtectionGroup | obsolete | A collection of objects providing management of DOS protection application in a Juniper product. This object became obsolete with the addition of dos-protectio… | |
| 1.3.6.1.4.1.4874.2.2.80.4.2.2 | GroupjuniDosProtectionGroup2 | current | A collection of objects providing management of DOS protection application in a Juniper product. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| JuniDosProtectionControlProcessorDestination | INTEGER { ic(0), sc(1), dataPath(2) } | current | The available control processors to which a control protocol may be directed. |
| JuniDosProtectionLayerId | INTEGER { ip(0), ppp(1), ethernet(6), atm1483(11), pppoe(17), bridge1483(19), vlan(35), ipv6(50) } | current | The available interface types for which a profile entry may be defined. |
| JuniDosProtectionPriorityType | INTEGER { hiGreenFcIc(0), hiYellowFcIc(1), loGreenFcIc(2), loYellowFcIc(3), hiGreenFcSc(4), hiYellowFcSc(5), loGreenFcSc(6), loYellowFcSc(7) } | current | The control priorities that are supported by the DOS protection application. |
| JuniDosProtectionProtocolCannedType | INTEGER { default(0), enetAccess(1), atmAccess(2), frame(3), uplink(4) } | current | The available canned dos-protection-groups which can be used to set defaults into a user specified group. |
| JuniDosProtectionProtocolPriorityType | INTEGER { hiGreen(0), hiYellow(1), loGreen(2), loYellow(3), dataPath(4) } | current | The control priorities that are supported by the DOS protection application for each control processor |
| JuniDosProtectionProtocolState | INTEGER { ok(1), inTrouble(2) } | current | The current state of a protocol. |
| JuniDosProtectionProtocolType | INTEGER { pppEchoRequest(0), ppEchoReply(1), pppEchoReplyFast(2), pppControl(3), atmControl(4), atmOam(5), atmDynamicIf(6), atmInverseArp(7), frameRelayControl(8), frameRelayArp(9), pppoeControl(10), pppoePppConfig(11), ethernetArpMiss(12), ethernetArp(13), ethernetFcBasedArp(14), ethernetLacp(15), ethernetOam(16), ethernetDynamicIf(17), ethernetPppTerminate(18), slepSlarp(19), slepSlarpReplyFast(20), mplsTtlOnReceive(21), mplsTtlOnTransmit(22), mplsMtuExceeded(23), itmL2tpControl(24), flisInPayload(25), flisInPayloadUpdateTable(26), dhcpExternal(27), ipOsi(28), ipTtlExpired(29), ipOptionsOther(30), ipOptionsRouterAlert(31), ipMulticastBroadcastOther(32), ipMulticastDhcpSc(33), ipMulticastControlSc(34), ipMulticastControlIc(35), ipMulticastVrrp(36), ipMulticastCacheMiss(37), ipMulticastCacheMissAutoReply(38), ipMulticastWrongIf(39), ipLocalDhcpSc(40), ipLocalDhcpIc(41), ipLocalIcmpEcho(42), ipLocalIcmpOther(43), ipLocalLDP(44), ipLocalBgp(45), ipLocalOspf(46), ipLocalRsvp(47), ipLocalPim(48), ipLocalCops(49), ipLocalL2tpControlSc(50), ipLocalL2tpControlIc(51), ipLocalOther(52), ipLocalDemuxMiss(53), ipRouteToSrpEthernet(54), ipRouteNoRoute(55), ipNormalPathMtu(56), ipNeighborDiscovery(57), ipNeighborDiscoveryMiss(58), ipSearchError(59), ipMld(60), ipLocalPimAssert(61), ipLocalBfd(62), ipFastBfd(63), ipLocalFastBfd(64), ipIke(65), ipReassembly(66), ipLocalIcmpFragment(67), ipLocalFragment(68), ipAppClassifierHttpRedirect(69), ipMulticastDhcpIc(70), dhcpTesterIc(71), atmDynamicIfPppData(72), ipLocalLspPing(73) } | current | The control protocols that are supported by the DOS protection application. |
| JuniDosProtectionScfdsTableOverflowState | INTEGER { notOverflowingOrGrouping(1), grouping(2), overflowing(3) } | current | The current state of the suspicious flow table. |