Juniper-ETHERNET-MIB
68 objects
The Ethernet MIB for the Juniper Networks enterprise. This MIB contains managed objects for the Ethernet interfaces that extend the IF-MIB.ifTable. It also contains managed objects for creation of Ethernet subInterfaces.
Imported Objects
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniNextIfIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.34 | IdentityjuniEthernetMIB | The Ethernet MIB for the Juniper Networks enterprise. This MIB contains managed objects for the Ethernet interfaces that extend the IF-MIB.ifTable. It also con… | ||
| 1.3.6.1.4.1.4874.2.2.34.1 | NodejuniEthernetObjects | |||
| 1.3.6.1.4.1.4874.2.2.34.1.1 | NodejuniEthernetIfLayer | |||
| 1.3.6.1.4.1.4874.2.2.34.1.1.1 | TablejuniEthernetIfTable | not-accessible | current | The parameters for the Ethernet interface. |
| 1.3.6.1.4.1.4874.2.2.34.1.1.1.1 | RowjuniEthernetIfEntry | not-accessible | current | The Parameters for a particular Ethernet interface. Entries in this table correspond with entries in the ifTable/ifXTable/juniIfTable. |
| 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.1 | ColumnjuniEthernetIfIndex | not-accessible | current | The ifIndex value of the corresponding ethernet interface. |
| 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.2 | ColumnjuniEthernetIfDuplexMode | read-write | current | The configured duplex setting for this ethernet interface. The operational value is reported in this table entry's corresponding juniEthernetIfOperDuplexMode o… |
| 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.3 | ColumnjuniEthernetIfSpeed | read-write | current | The configured speed setting for this ethernet interface. The operational value is reported in the corresponding Interfaces MIB ifSpeed object. NOTE, configura… |
| 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.4 | ColumnjuniEthernetIfMtu | read-write | current | The configured maximum transfer unit (MTU) for this ethernet interface. The operational value is reported in the corresponding Interfaces MIB ifMtu object. |
| 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.5 | ColumnjuniEthernetIfOperDuplexMode | read-only | current | The current operational duplex mode for this ethernet interface. |
| 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.6 | ColumnjuniEthernetIfPrimaryMauType | read-only | current | The primary MAU type. |
| 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.7 | ColumnjuniEthernetIfSecondaryMauType | read-only | current | The secondary MAU type for those ports that support a secondary. |
| 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.8 | ColumnjuniEthernetIfPrimaryLength | read-only | current | The rated cable length in meters for the primary MAU. If the value is 0, the length is unspecified. |
| 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.9 | ColumnjuniEthernetIfSecondaryLength | read-only | current | The rated cable length in meters for the secondary MAU for those ports that support a secondary. If the value is 0, the length is unspecified. |
| 1.3.6.1.4.1.4874.2.2.34.1.2 | NodejuniEthernetSubIfLayer | |||
| 1.3.6.1.4.1.4874.2.2.34.1.2.1 | ScalarjuniEthernetSubIfNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in juniEthernetSubIfTable. A GET of this object returns the next available ifIndex value to be used to create a… |
| 1.3.6.1.4.1.4874.2.2.34.1.2.2 | TablejuniEthernetSubIfTable | not-accessible | current | This table contains entries for Ethernet Subinterfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.34.1.2.2.1 | RowjuniEthernetSubIfEntry | not-accessible | current | Each entry describes the characteristics of an Ethernet Subinterface. Creating/deleting entries in this table causes corresponding entries for be created/delet… |
| 1.3.6.1.4.1.4874.2.2.34.1.2.2.1.1 | ColumnjuniEthernetSubIfIndex | not-accessible | current | The ifIndex of the Ethernet Subinterface. When creating entries in this table, suitable values for this object are determined by reading juniEthernetSubNextIfI… |
| 1.3.6.1.4.1.4874.2.2.34.1.2.2.1.2 | ColumnjuniEthernetSubIfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.34.1.2.2.1.3 | ColumnjuniEthernetSubIfLowerIfIndex | read-create | current | The ifIndex of a Ethernet interface over which this Ethernet Subinterface is to be layered. A value of zero indicates no layering. An implementation may choose… |
| 1.3.6.1.4.1.4874.2.2.34.1.2.2.1.4 | ColumnjuniEthernetSubIfId | read-create | current | An integer identifier for the Ethernet subinterface, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only… |
| 1.3.6.1.4.1.4874.2.2.34.1.3 | NodejuniVlanMajorIfLayer | |||
| 1.3.6.1.4.1.4874.2.2.34.1.3.1 | ScalarjuniVlanMajorNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in juniVlanMajorIfTable. A GET of this object returns the next available ifIndex value to be used to create an … |
| 1.3.6.1.4.1.4874.2.2.34.1.3.2 | TablejuniVlanMajorIfTable | not-accessible | current | This table contains entries for major VLAN interfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.34.1.3.2.1 | RowjuniVlanMajorIfEntry | not-accessible | current | Each entry describes the characteristics of a major VLAN interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted… |
| 1.3.6.1.4.1.4874.2.2.34.1.3.2.1.1 | ColumnjuniVlanMajorIfIndex | not-accessible | current | The ifIndex of the major VLAN interface. When creating entries in this table, suitable values for this object are determined by reading juniVlanMajorNextIfInde… |
| 1.3.6.1.4.1.4874.2.2.34.1.3.2.1.2 | ColumnjuniVlanMajorIfLowerIfIndex | read-create | current | The ifIndex of the interface over which this major VLAN interface is to be layered. A value of zero indicates no layering. An implementation may choose to requ… |
| 1.3.6.1.4.1.4874.2.2.34.1.3.2.1.3 | ColumnjuniVlanMajorIfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.34.1.4 | NodejuniVlanSubIfLayer | |||
| 1.3.6.1.4.1.4874.2.2.34.1.4.1 | ScalarjuniVlanSubNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in juniVlanSubIfTable. A GET of this object returns the next available ifIndex value to be used to create an en… |
| 1.3.6.1.4.1.4874.2.2.34.1.4.2 | TablejuniVlanSubIfTable | not-accessible | current | This table contains entries for VLAN Subinterfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.34.1.4.2.1 | RowjuniVlanSubIfEntry | not-accessible | current | Each entry describes the characteristics of a VLAN Subinterface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in… |
| 1.3.6.1.4.1.4874.2.2.34.1.4.2.1.1 | ColumnjuniVlanSubIfIndex | not-accessible | current | The ifIndex of the VLAN Subinterface. When creating entries in this table, suitable values for this object are determined by reading juniVlanSubNextIfIndex. |
| 1.3.6.1.4.1.4874.2.2.34.1.4.2.1.2 | ColumnjuniVlanSubIfVlanId | read-create | current | An integer identifier or tag ID for this VLAN A value of zero indicates the default VLAN. When VLANs are enabled, the value must be unique among subinterfaces … |
| 1.3.6.1.4.1.4874.2.2.34.1.4.2.1.3 | ColumnjuniVlanSubIfVlanUntagged | read-create | current | When VLANs are enabled, this allows tagged frames to be received, while transmitted frames remain untagged. This can only be enabled when the juniVlanSubIfVlan… |
| 1.3.6.1.4.1.4874.2.2.34.1.4.2.1.4 | ColumnjuniVlanSubIfLowerIfIndex | read-create | current | The ifIndex of VLAN major interface over which this VLAN Subinterface is to be layered. A value of zero indicates no layering. An implementation may choose to … |
| 1.3.6.1.4.1.4874.2.2.34.1.4.2.1.5 | ColumnjuniVlanSubIfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.34.1.4.2.1.6 | ColumnjuniVlanSubIfVlanStackId | read-create | current | An integer identifier or tag ID for this S-VLAN. When S-VLANs are enabled, the VLAN and S-VLAN ID valuse must be unique among subinterfaces configured on the s… |
| 1.3.6.1.4.1.4874.2.2.34.1.4.2.1.7 | ColumnjuniVlanSubIfVlanStackEthertype | read-create | current | The ethertype is used to recognize and demultiplex traffic for this S-VLAN. Must be either 0x8100, 0x88a8, or 0x9100. |
| 1.3.6.1.4.1.4874.2.2.34.1.4.2.1.8 | ColumnjuniVlanSubIfVlanAdvisoryRxSpeed | read-create | current | Advisory receive speed, in kilobits per second (kbps), of this subinterface. This object has no impact on forwarding performance but may be used as a hint for … |
| 1.3.6.1.4.1.4874.2.2.34.1.4.2.1.9 | ColumnjuniVlanSubIfVlanAdvisoryTxSpeed | read-create | current | Advisory transmit speed, in kilobits per second (kbps), of this subinterface. This object has no impact on forwarding performance but may be used as a hint for… |
| 1.3.6.1.4.1.4874.2.2.34.1.5 | NodejuniEthernetIfStats | |||
| 1.3.6.1.4.1.4874.2.2.34.1.5.1 | TablejuniEthernetIfStatsTable | not-accessible | current | The parameters for the Ethernet interface statistics. |
| 1.3.6.1.4.1.4874.2.2.34.1.5.1.1 | RowjuniEthernetIfStatsEntry | not-accessible | current | The Parameters for a particular Ethernet interface statistics. |
| 1.3.6.1.4.1.4874.2.2.34.1.5.1.1.1 | ColumnjuniEthernetIfStatsIndex | not-accessible | current | The ifIndex value of the corresponding ethernet interface. |
| 1.3.6.1.4.1.4874.2.2.34.1.5.1.1.2 | ColumnjuniEthernetIfIngressLineUtilization | read-only | current | The ingress line utilization statistic for this ethernet interface. |
| 1.3.6.1.4.1.4874.2.2.34.1.5.1.1.3 | ColumnjuniEthernetIfEgressLineUtilization | read-only | current | The egress line utilization statistic for this ethernet interface. |
| 1.3.6.1.4.1.4874.2.2.34.1.6 | NodejuniLagIfLayer | |||
| 1.3.6.1.4.1.4874.2.2.34.1.6.1 | ScalarjuniLagNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in juniLagIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry … |
| 1.3.6.1.4.1.4874.2.2.34.4 | NodejuniEthernetConformance | |||
| 1.3.6.1.4.1.4874.2.2.34.4.1 | NodejuniEthernetCompliances | |||
| 1.3.6.1.4.1.4874.2.2.34.4.1.1 | CompliancejuniEthernetCompliance | obsolete | Obsolete compliance statement for entities which implement the Juniper Ethernet MIB. This statement became obsolete when support for VLANs was added. | |
| 1.3.6.1.4.1.4874.2.2.34.4.1.2 | CompliancejuniEthernetCompliance2 | obsolete | Obsolete compliance statement for entities which implement the Juniper Ethernet MIB. This statement became obsolete when VLAN stack support was added. | |
| 1.3.6.1.4.1.4874.2.2.34.4.1.3 | CompliancejuniEthernetCompliance3 | obsolete | Obsolete compliance statement for entities which implement the Juniper Ethernet MIB. This statement became obsolete when MAU type and length support was added. | |
| 1.3.6.1.4.1.4874.2.2.34.4.1.4 | CompliancejuniEthernetCompliance4 | obsolete | The compliance statement for entities which implement the Juniper Ethernet MIB. This statement became obsolete when Ethernet interface statistics support was a… | |
| 1.3.6.1.4.1.4874.2.2.34.4.1.5 | CompliancejuniEthernetCompliance5 | obsolete | The compliance statement for entities which implement the Juniper Ethernet MIB. | |
| 1.3.6.1.4.1.4874.2.2.34.4.1.6 | CompliancejuniEthernetCompliance6 | current | The compliance statement for entities which implement the Juniper Ethernet MIB. | |
| 1.3.6.1.4.1.4874.2.2.34.4.2 | NodejuniEthernetGroups | |||
| 1.3.6.1.4.1.4874.2.2.34.4.2.1 | GroupjuniEthernetGroup | obsolete | Obsolete collection of objects providing management of Ethernet interfaces in a Juniper product. This group became obsolete when MAU type and length support wa… | |
| 1.3.6.1.4.1.4874.2.2.34.4.2.2 | GroupjuniEthernetSubIfGroup | current | A collection of objects providing management of Ethernet SubInterfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.34.4.2.3 | GroupjuniVlanGroup | current | A collection of objects providing management of Major VLAN interfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.34.4.2.4 | GroupjuniVlanSubIfGroup | obsolete | Obsolete collection of objects providing management of VLAN SubInterfaces in a Juniper product. This group became obsolete when VLAN stack support was added. | |
| 1.3.6.1.4.1.4874.2.2.34.4.2.5 | GroupjuniVlanSubIfGroup2 | current | A collection of objects providing management of VLAN SubInterfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.34.4.2.6 | GroupjuniEthernetGroup2 | current | A collection of objects providing management of Ethernet interfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.34.4.2.7 | GroupjuniEthernetIfStatsGroup | current | A collection of objects providing Ethernet interface statistics in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.34.4.2.8 | GroupjuniLagIfGroup | current | A collection of objects providing management of LAG interfaces in a Juniper product. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| JuniEthernetIfMauType | INTEGER { mauNotPresent(0), mauNotSupported(1), mau10BaseT(2), mau100BaseTx(3), mau1000BaseT(4), mau1000BaseCx(5), mau1000BaseSx(6), mau1000BaseLx(7), mau1000BaseZx(8), mauSfpUnknown(9), mauSfpNotPresent(10), mau100BaseFxSm(11), mau100BaseFxMm(12), mauSfpNotJnprCompliant(13), mau10000BaseSr(14), mau10000BaseLr(15), mau10000BaseEr(16), mauXfpUnknown(17), mauXfpNotPresent(18), mauXfpNotJnprCompliant(19) } | current | The type of Medium Attachment Unit (physical cable connection) on an Ethernet physical interface. A MAU may be a fixed type, or it may be a removable type (SFP or XFP). SFP's and XFP's provide a readable Module Definiti… |