Juniper-FRAME-RELAY-MIB
112 objects
The Frame Relay MIB for the Juniper Networks enterprise.
Imported Objects
| FRAME-RELAY-DTE-MIB | DLCI |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniNextIfIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.10 | IdentityjuniFrameRelayMIB | The Frame Relay MIB for the Juniper Networks enterprise. | ||
| 1.3.6.1.4.1.4874.2.2.10.1 | NodejuniFrObjects | |||
| 1.3.6.1.4.1.4874.2.2.10.1.1 | NodejuniFrIfLayer | |||
| 1.3.6.1.4.1.4874.2.2.10.1.1.1 | ScalarjuniFrNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in juniFrDlcmiTable. A GET of this object returns the next available ifIndex value to be used to create an entr… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2 | TablejuniFrDlcmiTable | not-accessible | current | The Parameters for the Data Link Connection Management Interface for the frame relay service on this interface. This table represents a superset of functionali… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1 | RowjuniFrDlcmiEntry | not-accessible | current | The Parameters for a particular Data Link Connection Management Interface. Creating/deleting entries in this table causes corresponding entries for be created/… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.1 | ColumnjuniFrDlcmiIfIndex | read-only | current | The ifIndex value of the corresponding ifEntry. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.2 | ColumnjuniFrDlcmiState | read-create | current | This variable states which Data Link Connection Management scheme is active (and by implication, what DLCI it uses) on the Frame Relay interface. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.3 | ColumnjuniFrDlcmiAddress | read-create | current | This variable states which address format is in use on the Frame Relay interface. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.4 | ColumnjuniFrDlcmiAddressLen | read-create | current | This variable states the address length in octets. In the case of Q922 format, the length indicates the entire length of the address including the control port… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.5 | ColumnjuniFrDlcmiPollingInterval | read-create | current | This is the number of seconds between successive status enquiry messages sent by the DTE. Pertains to DTE/NNI operation only. This parameter can be reconfigure… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.6 | ColumnjuniFrDlcmiFullEnquiryInterval | read-create | current | Number of status enquiry intervals that pass before issuance of a full status enquiry message. Pertains to DTE/NNI operation only. This parameter can be reconf… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.7 | ColumnjuniFrDlcmiErrorThreshold | read-create | current | The minimum number of errors that must be observed within the number of events specified by juniFrDlcmiMonitoredEvents, to declare the interface down. 'error' … |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.8 | ColumnjuniFrDlcmiMonitoredEvents | read-create | current | The number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station receive… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.9 | ColumnjuniFrDlcmiMaxSupportedVCs | read-create | current | The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. In response to a SET, if a value less than zero… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.10 | ColumnjuniFrDlcmiMulticast | read-create | current | This indicates whether the Frame Relay interface is using a multicast service. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.11 | ColumnjuniFrDlcmiStatus | read-only | current | This indicates the status of the Frame Relay interface as determined by the performance of the DLCMI. If no DLCMI is running, the Frame Relay interface will st… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.12 | ColumnjuniFrDlcmiRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.13 | ColumnjuniFrDlcmiLowerIfIndex | read-create | current | The ifIndex of an interface over which this Frame Relay interface is to be layered. A value of zero indicates no layering. An implementation may choose to requ… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.14 | ColumnjuniFrDlcmiRole | read-create | current | Specifies the role this interface assumes with respect to the remote end. When acting as a DTE, the following objects are not relevant: juniFrDlcmiDcePollingIn… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.15 | ColumnjuniFrDlcmiDcePollingInterval | read-create | current | The number of seconds within which a DCE expects to receive a Status Enquiry from the DTE. This value corresponds to the T392 timer. Pertains to DCE/NNI operat… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.16 | ColumnjuniFrDlcmiDceErrorThreshold | read-create | current | The minimum number of errors that must be observed within the number of events specified by juniFrDlcmiDceMonitoredEvents, to declare the interface down. 'erro… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.17 | ColumnjuniFrDlcmiDceMonitoredEvents | read-create | current | The number of DCE polling intervals over which accumulated errors are counted against the threshold specified in juniFrDlcmiDceErrorThreshold. If, within this … |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.18 | ColumnjuniFrDlcmiMultilinkFrBundleName | read-create | current | This represents multilink frame relay bundle name. This object must be configured to associate the bundle name to the frame relay major interface to support th… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3 | TablejuniFrDlcmiStatsTable | not-accessible | current | The statistics for the Data Link Connection Management Interface for the frame relay service on this interface. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1 | RowjuniFrDlcmiStatsEntry | not-accessible | current | The statistics for a particular Data Link Connection Management Interface. Statistics are not relevant while the juniFrDlcmiState has the value 'noLmiConfigure… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.1 | ColumnjuniFrDlcmiStatsDteEnquiries | read-only | current | Number of Status Enquiries sent (as DTE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.2 | ColumnjuniFrDlcmiStatsDteFullEnquiries | read-only | current | Number of Full Enquiries sent (as DTE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.3 | ColumnjuniFrDlcmiStatsDteEnquiryResponses | read-only | current | Number of Status Enquiry responses received (as DTE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.4 | ColumnjuniFrDlcmiStatsDteFullEnquiryResponses | read-only | current | Number of Full Enquiry responses received (as DTE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.5 | ColumnjuniFrDlcmiStatsDteAsyncUpdates | read-only | current | Number of Asynchronous Updates received (as DTE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.6 | ColumnjuniFrDlcmiStatsDteUnknownRxMessages | read-only | current | Number of unknown messages received (as DTE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.7 | ColumnjuniFrDlcmiStatsDteLossOfSequences | read-only | current | Number of times a discontinuity in sequence numbering of received messages was detected (as DTE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.8 | ColumnjuniFrDlcmiStatsDteNoResponseTimeouts | read-only | current | Number of timer expirations awaiting a Status message (as DTE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.9 | ColumnjuniFrDlcmiStatsDceEnquiries | read-only | current | Number of Status Enquiries received (as DCE.) |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.10 | ColumnjuniFrDlcmiStatsDceFullEnquiries | read-only | current | Number of Full Enquiries received (as DCE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.11 | ColumnjuniFrDlcmiStatsDceEnquiryResponses | read-only | current | Number of Status Enquiry responses sent (as DCE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.12 | ColumnjuniFrDlcmiStatsDceFullEnquiryResponses | read-only | current | Number of Full Enquiry responses sent (as DCE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.13 | ColumnjuniFrDlcmiStatsDceAsyncUpdates | read-only | current | Number of Asynchronous Updates sent (as DCE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.14 | ColumnjuniFrDlcmiStatsDceUnknownRxMessages | read-only | current | Number of unknown messages received (as DCE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.15 | ColumnjuniFrDlcmiStatsDceLossOfSequences | read-only | current | Number of times a discontinuity in sequence numbering of received messages was detected (as DCE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.16 | ColumnjuniFrDlcmiStatsDceNoResponseTimeouts | read-only | current | Number of timer expirations awaiting a Status Enquiry (as DCE). |
| 1.3.6.1.4.1.4874.2.2.10.1.1.3.1.17 | ColumnjuniFrDlcmiStatsDiscontinuityTime | read-only | current | Value of sysUpTime at the most recent event that caused a discontinuity in the monotonic operation of any of the counters in this entry. Such disruption might … |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4 | TablejuniFrCircuitTable | not-accessible | current | A table containing information about specific Data Link Connections (DLC) or virtual circuits. This table mirrors the structure of FRAME-RELAY-DTE-MIB.frCircui… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1 | RowjuniFrCircuitEntry | not-accessible | current | The information regarding a single Data Link Connection. Discontinuities in the counters contained in this table are indicated by the value in juniFrCircuitCre… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.1 | ColumnjuniFrCircuitIfIndex | not-accessible | current | The ifIndex Value of the ifEntry this virtual circuit is layered onto. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.2 | ColumnjuniFrCircuitDlci | not-accessible | current | The Data Link Connection Identifier for this virtual circuit. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.3 | ColumnjuniFrCircuitState | read-create | current | Indicates whether the particular virtual circuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows) … |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.4 | ColumnjuniFrCircuitReceivedFECNs | read-only | current | Number of frames received from the network indicating forward congestion since the virtual circuit was created. This occurs when the remote DTE sets the FECN f… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.5 | ColumnjuniFrCircuitReceivedBECNs | read-only | current | Number of frames received from the network indicating backward congestion since the virtual circuit was created. This occurs when the remote DTE sets the BECN … |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.6 | ColumnjuniFrCircuitSentFrames | read-only | current | The number of frames sent from this virtual circuit since it was created. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.7 | ColumnjuniFrCircuitSentOctets | read-only | current | The number of octets sent from this virtual circuit since it was created. Octets counted are the full frame relay header and the payload, but do not include th… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.8 | ColumnjuniFrCircuitReceivedFrames | read-only | current | Number of frames received over this virtual circuit since it was created. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.9 | ColumnjuniFrCircuitReceivedOctets | read-only | current | Number of octets received over this virtual circuit since it was created. Octets counted include the full frame relay header, but do not include the flag chara… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.10 | ColumnjuniFrCircuitCreationTime | read-only | current | The value of sysUpTime when the virtual circuit was created, whether by the Data Link Connection Management Interface or by a SetRequest. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.11 | ColumnjuniFrCircuitLastTimeChange | read-only | current | The value of sysUpTime when last there was a change in the virtual circuit state |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.12 | ColumnjuniFrCircuitCommittedBurst | read-create | current | This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval. A va… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.13 | ColumnjuniFrCircuitExcessBurst | read-create | current | This variable indicates the maximum amount of uncommitted data bits that the network will attempt to deliver over the measurement interval. By default, if not … |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.14 | ColumnjuniFrCircuitThroughput | read-create | current | Throughput is the average number of 'Frame Relay Information Field' bits transferred per second across a user network interface in one direction, measured over… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.15 | ColumnjuniFrCircuitMulticast | read-create | current | This indicates whether this VC is used as a unicast VC (i.e. not multicast) or the type of multicast service subscribed to. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.16 | ColumnjuniFrCircuitType | read-only | current | Indication of whether the VC was manually created (static), or dynamically created (dynamic) via the data link control management interface. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.17 | ColumnjuniFrCircuitDiscards | read-only | current | The number of inbound frames dropped because of format errors, or because the VC is inactive. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.18 | ColumnjuniFrCircuitReceivedDEs | read-only | current | Number of frames received from the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the remote DT… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.19 | ColumnjuniFrCircuitSentDEs | read-only | current | Number of frames sent to the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the local DTE sets … |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.20 | ColumnjuniFrCircuitLogicalIfIndex | read-create | current | Normally the same value as frDlcmiIfIndex, but different when an implementation associates a virtual ifEntry with a DLC or set of DLCs in order to associate hi… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.21 | ColumnjuniFrCircuitRowStatus | read-create | current | This object is used to create a new row or modify or destroy an existing row in the manner described in the definition of the RowStatus textual convention. Wri… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.22 | ColumnjuniFrCircuitSentFECNs | read-only | current | Number of frames sent to the network indicating forward congestion since the virtual circuit was created. This occurs when the remote DTE sets the FECN flag, o… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.4.1.23 | ColumnjuniFrCircuitSentBECNs | read-only | current | Number of frames sent to the network indicating backward congestion since the virtual circuit was created. This occurs when the remote DTE sets the BECN flag, … |
| 1.3.6.1.4.1.4874.2.2.10.1.2 | NodejuniFrSubIfLayer | |||
| 1.3.6.1.4.1.4874.2.2.10.1.2.1 | ScalarjuniFrSubIfNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in juniFrSubIfTable. A GET of this object returns the next available ifIndex value to be used to create an entr… |
| 1.3.6.1.4.1.4874.2.2.10.1.2.2 | TablejuniFrSubIfTable | not-accessible | current | This table contains entries for Frame Relay Subinterfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.10.1.2.2.1 | RowjuniFrSubIfEntry | not-accessible | current | Each entry describes the characteristics of a Frame Relay Subinterface. Creating/deleting entries in this table causes corresponding entries for be created /de… |
| 1.3.6.1.4.1.4874.2.2.10.1.2.2.1.1 | ColumnjuniFrSubIfIndex | not-accessible | current | The ifIndex of the Frame Relay Subinterface. When creating entries in this table, suitable values for this object are determined by reading juniFrSubNextIfInde… |
| 1.3.6.1.4.1.4874.2.2.10.1.2.2.1.2 | ColumnjuniFrSubIfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.10.1.2.2.1.3 | ColumnjuniFrSubIfLowerIfIndex | read-create | current | The ifIndex of a Frame Relay interface over which this Frame Relay Subinterface is to be layered. A value of zero indicates no layering. An implementation may … |
| 1.3.6.1.4.1.4874.2.2.10.1.2.2.1.4 | ColumnjuniFrSubIfId | read-create | current | An integer identifier for the Frame Relay subinterface, used in conjunction with the command-line interface. It is provided here for cross-reference purposes o… |
| 1.3.6.1.4.1.4874.2.2.10.1.2.3 | TablejuniFrSubIfCktTable | not-accessible | current | This table contains entries for Frame Relay circuits configured on Frame Relay Subinterfaces present in the system. An implementation may constrain the number … |
| 1.3.6.1.4.1.4874.2.2.10.1.2.3.1 | RowjuniFrSubIfCktEntry | not-accessible | current | Each entry describes the characteristics of a Frame Relay Subinterface circuit. |
| 1.3.6.1.4.1.4874.2.2.10.1.2.3.1.1 | ColumnjuniFrSubIfCktDlci | not-accessible | current | The DLCI of the Frame Relay circuit used by this subinterface. |
| 1.3.6.1.4.1.4874.2.2.10.1.2.3.1.2 | ColumnjuniFrSubIfCktRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.10.1.3 | NodejuniFrMlFr | |||
| 1.3.6.1.4.1.4874.2.2.10.1.3.1 | TablejuniFrMlFrBundleTable | not-accessible | current | This table contains entries for MLFR bundles present in the system. |
| 1.3.6.1.4.1.4874.2.2.10.1.3.1.1 | RowjuniFrMlFrBundleEntry | not-accessible | current | Each entry describes the characteristics of a Multilink bundle. |
| 1.3.6.1.4.1.4874.2.2.10.1.3.1.1.1 | ColumnjuniFrMlFrBundleName | not-accessible | current | The administrative name of the multilink bundle associated with this Frame Relay major interface. |
| 1.3.6.1.4.1.4874.2.2.10.1.3.1.1.2 | ColumnjuniFrMlFrBundleRowStatus | read-create | current | The rowStatus for this entry. The following sets are supported: createAndGo(4), destroy(6) The following values can be read from this object: active(1) |
| 1.3.6.1.4.1.4874.2.2.10.1.3.2 | ScalarjuniFrMlFrNextLinkIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in juniFrMlFrLinkConfigTable. A GET of this object returns the next available ifIndex value to be used to creat… |
| 1.3.6.1.4.1.4874.2.2.10.1.3.3 | TablejuniFrMlFrLinkConfigTable | not-accessible | current | This table contains entries for FR link interfaces present in the system to be added to the multilink bundles. |
| 1.3.6.1.4.1.4874.2.2.10.1.3.3.1 | RowjuniFrMlFrLinkConfigEntry | not-accessible | current | Each entry describes the characteristics of FR link interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in i… |
| 1.3.6.1.4.1.4874.2.2.10.1.3.3.1.1 | ColumnjuniFrMlFrLinkConfigIfIndex | not-accessible | current | The ifIndex of the FR link interface. When creating entries in this table, suitable values for this object are determined by reading juniFrMlFrNextLinkIfIndex. |
| 1.3.6.1.4.1.4874.2.2.10.1.3.3.1.2 | ColumnjuniFrMlFrLinkConfigLowerIfIndex | read-create | current | The ifIndex of an interface over which this FR link interface is to be layered. A value of zero indicates no layering. An implementation may choose to require … |
| 1.3.6.1.4.1.4874.2.2.10.1.3.3.1.3 | ColumnjuniFrMlFrLinkConfigRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.10.1.3.4 | TablejuniFrMlFrMajorConfigTable | not-accessible | current | This table contains entries for FR major interfaces present in the system which are associated with multilink bundles. |
| 1.3.6.1.4.1.4874.2.2.10.1.3.4.1 | RowjuniFrMlFrMajorConfigEntry | not-accessible | current | Each entry describes the characteristics of FR major interface which have association with the MLFR bundles. Creating/deleting entries in this table causes cor… |
| 1.3.6.1.4.1.4874.2.2.10.1.3.4.1.1 | ColumnjuniFrMlFrMajorConfigIfIndex | not-accessible | current | The ifIndex of the FR Major interface. When creating entries in this table, suitable values for this object are determined by reading already created FR Major … |
| 1.3.6.1.4.1.4874.2.2.10.1.3.4.1.2 | ColumnjuniFrMlFrMajorConfigLowerIfIndex | read-create | current | The ifIndex of a FR link interface over which this FR Major interface is to be layered. On sets, the value of this object must equal on of the previously creat… |
| 1.3.6.1.4.1.4874.2.2.10.1.3.4.1.3 | ColumnjuniFrMlFrMajorBundleName | read-create | current | The MLFR bundle name administratively assigned. |
| 1.3.6.1.4.1.4874.2.2.10.1.3.4.1.4 | ColumnjuniFrMlFrMajorRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.10.1.3.5 | TablejuniFrMlFrLinkBindTable | not-accessible | current | This table contains entries for FR Link interfaces to FR major interfaces bindings associated with multilink bundles. |
| 1.3.6.1.4.1.4874.2.2.10.1.3.5.1 | RowjuniFrMlFrLinkBindEntry | not-accessible | current | Each entry describes the FR link interface to FR major interface bindingsi associated with multilink bundles. |
| 1.3.6.1.4.1.4874.2.2.10.1.3.5.1.1 | ColumnjuniFrMlFrBindMajorIfIndex | not-accessible | current | The ifIndex of the FR major interface associated with multilink. |
| 1.3.6.1.4.1.4874.2.2.10.1.3.5.1.2 | ColumnjuniFrMlFrBindLinkIfIndex | not-accessible | current | The ifIndex of a FR link interface bound by the FR major interface defined by juniFrMlFrBindMajorIfIndex. |
| 1.3.6.1.4.1.4874.2.2.10.1.3.5.1.3 | ColumnjuniFrMlFrBindRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.10.4 | NodejuniFrConformance | |||
| 1.3.6.1.4.1.4874.2.2.10.4.1 | NodejuniFrCompliances | |||
| 1.3.6.1.4.1.4874.2.2.10.4.1.1 | CompliancejuniFrCompliance | obsolete | Obsolete compliance statement for entities that implement the Juniper Frame Relay MIB. This statement became obsolete when multi-link frame relay support was a… | |
| 1.3.6.1.4.1.4874.2.2.10.4.1.2 | CompliancejuniFrCompliance2 | current | The compliance statement for entities that implement the Juniper Frame Relay MIB. | |
| 1.3.6.1.4.1.4874.2.2.10.4.2 | NodejuniFrGroups | |||
| 1.3.6.1.4.1.4874.2.2.10.4.2.1 | GroupjuniFrGroup | obsolete | Obsolete collection of objects providing management of Frame Relay interfaces in a Juniper product. This group became obsolete when multi-link frame relay supp… | |
| 1.3.6.1.4.1.4874.2.2.10.4.2.2 | GroupjuniFrSubIfGroup | current | A collection of objects providing management of Frame Relay subinterfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.10.4.2.3 | GroupjuniFrGroup2 | current | A collection of objects providing management of Frame Relay interfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.10.4.2.4 | GroupjuniFrMlFrGroup | current | A collection of objects providing management of Multilink Frame Relay in a Juniper product. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| JuniFrMlFrBundleName | OCTET STRING (SIZE(0..32)) | current | MLFR Bundle name. The bundle name is a characteristic of a MLFR frame relay interface. Represents textual information taken from the NVT ASCII graphics character set (codes 32 through 126). |