MIB Viewer

Juniper-HDLC-MIB

27 objects
The HDLC MIB for the Juniper Networks enterprise. This MIB provides a means for configuring HDLC interfaces on top of various types of interfaces, such as packet over SONET (POS) and high speed serial interfaces (HSSI). Management objects are provided to query for an available interface index, and to create/delete interfaces of this type. Creating/deleting this interface type using this MIB has the side effect of creating/deleting corresponding entries in the IF-MIB.ifTable, the IF-MIB.ifXTable, and the Juniper-UNI-IF-MIB.juniIfTable.
Imported Objects
OIDNameAccessStatusDescription
1.3.6.1.4.1.4874.2.2.9IdentityjuniHdlcMIBThe HDLC MIB for the Juniper Networks enterprise. This MIB provides a means for configuring HDLC interfaces on top of various types of interfaces, such as pack…
1.3.6.1.4.1.4874.2.2.9.1NodejuniHdlcObjects
1.3.6.1.4.1.4874.2.2.9.1.1ScalarjuniHdlcNextIfIndexread-onlycurrentCoordinate ifIndex value allocation for entries in juniHdlcIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry…
1.3.6.1.4.1.4874.2.2.9.1.2TablejuniHdlcIfTablenot-accessiblecurrentThis table contains entries for HDLC interfaces present in the system.
1.3.6.1.4.1.4874.2.2.9.1.2.1RowjuniHdlcIfEntrynot-accessiblecurrentEach entry describes the characteristics of an HDLC interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in i…
1.3.6.1.4.1.4874.2.2.9.1.2.1.1ColumnjuniHdlcIfIndexnot-accessiblecurrentThe ifIndex of the HDLC interface. When creating entries in this table, suitable values for this object are determined by reading juniHdlcNextIfIndex.
1.3.6.1.4.1.4874.2.2.9.1.2.1.2ColumnjuniHdlcIfRowStatusread-createcurrentControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG…
1.3.6.1.4.1.4874.2.2.9.1.2.1.3ColumnjuniHdlcIfLowerIfIndexread-createcurrentThe ifIndex of an interface over which this HDLC interface is to be layered. A value of zero indicates no layering. An implementation may choose to require tha…
1.3.6.1.4.1.4874.2.2.9.1.2.1.4ColumnjuniHdlcIfMturead-createcurrentThe Maximum Transmission Unit (MTU) this interface is permitted to transmit. At creation, if a value for this object is not specified, a default will be chosen…
1.3.6.1.4.1.4874.2.2.9.1.2.1.5ColumnjuniHdlcIfMruread-createcurrentThe Maximum Receive Unit (MRU) this interface is permitted to receive. At creation, if a value for this object is not specified, a default will be chosen that …
1.3.6.1.4.1.4874.2.2.9.1.2.1.6ColumnjuniHdlcIfCrcSizeread-createcurrentSelects the CRC size: none, 16 bits, or 32 bits.
1.3.6.1.4.1.4874.2.2.9.1.2.1.7ColumnjuniHdlcIfDataPolarityread-createcurrentPolarity of data transmitted on this HDLC interface. Inverted data is used for certain line coding configurations to ensure sufficient one's density for timing…
1.3.6.1.4.1.4874.2.2.9.1.2.1.8ColumnjuniHdlcIfClockModeread-createcurrentThe clock mode setting for this HDLC interface. This object is only applicable to HDLC interfaces directly over a high speed serial interface (HSSI). At creati…
1.3.6.1.4.1.4874.2.2.9.1.2.1.9ColumnjuniHdlcIfClockRateread-createcurrentThe clock rate setting for this HDLC interface. This object is only applicable to HDLC interfaces directly over a high speed serial interface (HSSI). At creati…
1.3.6.1.4.1.4874.2.2.9.1.2.1.10ColumnjuniHdlcIfForceDteAckread-createcurrentThe force DTE acknowledge setting. This object is only applicable to HDLC interfaces directly over a high speed serial interface (HSSI). This is set to force C…
1.3.6.1.4.1.4874.2.2.9.1.2.1.11ColumnjuniHdlcIfIdleCharacterread-createcurrentThe HDLC idle character has two possible settings. The value can be set to idleCharacterFlags which translates to 0x7E or it can be set to idleCharacterMarks w…
1.3.6.1.4.1.4874.2.2.9.4NodejuniHdlcConformance
1.3.6.1.4.1.4874.2.2.9.4.1NodejuniHdlcCompliances
1.3.6.1.4.1.4874.2.2.9.4.1.1CompliancejuniHdlcComplianceobsoleteObsolete compliance statement for entities that implement the Juniper HDLC MIB. This compliance statement became obsolete when juniHdlcIfDataPolarity was added.
1.3.6.1.4.1.4874.2.2.9.4.1.2CompliancejuniHdlcCompliance2obsoleteThe compliance statement for entities that implement the Juniper HDLC MIB. This compliance statement became obsolete when juniHdlcIfClockMode, juniHdlcIfClockR…
1.3.6.1.4.1.4874.2.2.9.4.1.3CompliancejuniHdlcCompliance3obsoleteObsolete compliance statement for entities that implement the Juniper HDLC MIB. This compliance statement became obsolete when juniHdlcIfIdleCharacter was adde…
1.3.6.1.4.1.4874.2.2.9.4.1.4CompliancejuniHdlcCompliance4currentThe compliance statement for entities that implement the Juniper HDLC MIB.
1.3.6.1.4.1.4874.2.2.9.4.2NodejuniHdlcGroups
1.3.6.1.4.1.4874.2.2.9.4.2.1GroupjuniHdlcGroupobsoleteObsolete collection of objects providing management of HDLC interfaces in a Juniper product. This group became obsolete when juniHdlcIfDataPolarity was added.
1.3.6.1.4.1.4874.2.2.9.4.2.2GroupjuniHdlcGroup2obsoleteObsolete collection of objects providing management of HDLC interfaces in a Juniper product. This group became obsolete when juniHdlcIfClockMode, juniHdlcIfClo…
1.3.6.1.4.1.4874.2.2.9.4.2.3GroupjuniHdlcGroup3obsoleteObsolete collection of objects providing management of HDLC interfaces in a Juniper product. This group became obsolete when juniHdlcIfIdleCharacter was added.
1.3.6.1.4.1.4874.2.2.9.4.2.4GroupjuniHdlcGroup4currentA collection of objects providing management of HDLC interfaces in a Juniper product.