Juniper-IP-TUNNEL-MIB
22 objects
The IP Tunnel MIB for the Juniper Networks enterprise.
Imported Objects
| IF-MIB | InterfaceIndex |
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniName JuniNextIfIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.51 | IdentityjuniIpTunnelMIB | The IP Tunnel MIB for the Juniper Networks enterprise. | ||
| 1.3.6.1.4.1.4874.2.2.51.1 | NodejuniIpTunnelInterfaceObjects | |||
| 1.3.6.1.4.1.4874.2.2.51.1.1 | ScalarjuniIpTunnelNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in juniIpTunnelIfTable. A GET of this object returns the next available ifIndex value to be used to create an e… |
| 1.3.6.1.4.1.4874.2.2.51.1.2 | TablejuniIpTunnelInterfaceTable | not-accessible | current | This table contains entries of IP Tunnel interfaces. |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1 | RowjuniIpTunnelInterfaceEntry | not-accessible | current | Each entry describes the characteristics of a single IP Tunnel interface. Creating/deleting entries in this table causes corresponding entries for be created/d… |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1.1 | ColumnjuniIpTunnelIfIndex | not-accessible | current | The ifIndex of the IP tunnel interface. When creating entries in this table, suitable values for this object are determined by reading juniIpTunnelNextIfIndex. |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1.2 | ColumnjuniIpTunnelName | read-create | current | The administratively assigned name for this IP Tunnel interface. |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1.3 | ColumnjuniIpTunnelMode | read-create | current | The configured mode for this IP Tunnel interface. |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1.4 | ColumnjuniIpTunnelVirtualRouter | read-create | current | The transport virtual router associated with this IP tunnel interface. This object need not be set when creating row entries. Note that the default when this o… |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1.5 | ColumnjuniIpTunnelChecksum | read-create | current | The Tunnel checksum configuration for this entry. Setting this object to true(1) will enabled end-to-end checksumming and will cause the system to drop packets… |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1.6 | ColumnjuniIpTunnelMtu | read-create | current | The tunnel MTU. |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1.7 | ColumnjuniIpTunnelDestination | read-create | current | The tunnel destination IP address. |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1.8 | ColumnjuniIpTunnelSource | read-create | current | The tunnel source IP address. |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1.9 | ColumnjuniIpTunnelRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.51.1.2.1.10 | ColumnjuniIpTunnelSequenceNumbers | read-create | current | The tunnel sequence number configuration for this entry. Setting this object to true(1) will enable sequence number generation. Setting this object to false(2)… |
| 1.3.6.1.4.1.4874.2.2.51.2 | NodejuniIpTunnelConformance | |||
| 1.3.6.1.4.1.4874.2.2.51.2.1 | NodejuniIpTunnelCompliances | |||
| 1.3.6.1.4.1.4874.2.2.51.2.1.1 | CompliancejuniIpTunnnelCompliance | obsolete | Obsolete compliance statement for entities that implement the Juniper IP Tunnel MIB. This compliance statement became obsolete when juniIpTunnelSequenceNumbers… | |
| 1.3.6.1.4.1.4874.2.2.51.2.1.2 | CompliancejuniIpTunnnelCompliance2 | current | The compliance statement for entities that implement the Juniper IP Tunnel MIB. | |
| 1.3.6.1.4.1.4874.2.2.51.2.2 | NodejuniIpTunnelGroups | |||
| 1.3.6.1.4.1.4874.2.2.51.2.2.1 | GroupjuniIpTunnelInterfaceGroup | obsolete | Obsolete collection of objects for managing IP Tunnel capabilities in a Juniper product. This group became obsolete when juniIpTunnelSequenceNumbers was added. | |
| 1.3.6.1.4.1.4874.2.2.51.2.2.2 | GroupjuniIpTunnelInterfaceGroup2 | current | A collection of objects for managing IP Tunnel capabilities in a Juniper product. |