Juniper-IPsec-Tunnel-MIB
100 objects
The IPsec Tunnel MIB for the Juniper Networks enterprise.
Imported Objects
| IF-MIB | InterfaceIndex |
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniName JuniNextIfIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.70 | IdentityjuniIpsecTunnelMIB | The IPsec Tunnel MIB for the Juniper Networks enterprise. | ||
| 1.3.6.1.4.1.4874.2.2.70.1 | NodejuniIpsecObjects | |||
| 1.3.6.1.4.1.4874.2.2.70.1.1 | NodejuniIpsecTunnel | |||
| 1.3.6.1.4.1.4874.2.2.70.1.1.1 | ScalarjuniIpsecTunnelNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in the juniIpsecTunnelIfTable. A GET of this object returns the next available ifIndex value to be used to crea… |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2 | TablejuniIpsecTunnelInterfaceTable | not-accessible | current | This table contains entries of IPsec Tunnel interfaces. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1 | RowjuniIpsecTunnelInterfaceEntry | not-accessible | current | Each entry describes the characteristics of a single IPsec Tunnel interface. Creating/deleting entries in this table causes corresponding entries for be create… |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.1 | ColumnjuniIpsecTunnelIfIndex | not-accessible | current | The ifIndex of the IPsec tunnel interface. When creating entries in this table, suitable values for this object are determined by reading juniIpsecTunnelNextIf… |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.2 | ColumnjuniIpsecTunnelName | read-create | current | The administratively assigned name for this IPsec Tunnel interface. Before configuring other tunnel attributes, IPsec tunnel has to be created with minimum att… |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.3 | ColumnjuniIpsecTunnelType | read-create | current | The configured mode for this IPsec Tunnel interface. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.4 | ColumnjuniIpsecTunnelTransportVirtualRouter | read-create | current | The transport virtual router associated with this IPsec tunnel interface. This object need not be set when creating row entries. Note that the default when thi… |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.5 | ColumnjuniIpsecTunnelLocalEndPt | read-only | current | The tunnel local endpoint. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.6 | ColumnjuniIpsecTunnelRemoteEndPt | read-only | current | The tunnel remote endpoint. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.7 | ColumnjuniIpsecTunnelTransformSet | read-create | current | The transform set. It refers to a transform set that is defined in the transform set table. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.8 | ColumnjuniIpsecTunnelSrcType | read-create | current | The tunnel source type. The tunnel source may be identified by: 1. an IP(V4) address, or 2. a fully qualified domain name string, or 3. a user fully qualified … |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.9 | ColumnjuniIpsecTunnelSrcAddr | read-create | current | The tunnel source IP(V4) address. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.10 | ColumnjuniIpsecTunnelSrcName | read-create | current | The tunnel source Name. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.11 | ColumnjuniIpsecTunnelDstType | read-create | current | The tunnel destination type. The tunnel destination may be identified by: 1. an IP(V4) address, or 2. a fully qualified domain name string, or 3. a user fully … |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.12 | ColumnjuniIpsecTunnelDstAddr | read-create | current | The tunnel destination IP(V4) address. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.13 | ColumnjuniIpsecTunnelDstName | read-create | current | The tunnel destination Name. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.14 | ColumnjuniIpsecTunnelBackupDstType | read-create | current | The tunnel backup destination type. The tunnel backup destination type has to be the same as the tunnel destination type The tunnel destination may be identifi… |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.15 | ColumnjuniIpsecTunnelBackupDstAddr | read-create | current | The tunnel backup destination IP(V4) address. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.16 | ColumnjuniIpsecTunnelBackupDstName | read-create | current | The tunnel backup destination Name. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.17 | ColumnjuniIpsecTunnelLocalIdType | read-create | current | The tunnel phase-2 local identity type. The tunnel local identity type may be identified by: 1. an IP address, or 2. an IP address subnet, or 3. an IP address … |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.18 | ColumnjuniIpsecTunnelLocalIdAddr1 | read-create | current | The tunnel local phase-2 identity IP address 1. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.19 | ColumnjuniIpsecTunnelLocalIdAddr2 | read-create | current | The tunnel local phase-2 identity IP address 2 in the case the identity type is an IP address range. The tunnel local phase-2 identity netmask in the case the … |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.20 | ColumnjuniIpsecTunnelRemoteIdType | read-create | current | The tunnel phase-2 remote identity type. The tunnel remote identity type may be identified by: 1. an IP address, or 2. an IP address subnet, or 3. an IP addres… |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.21 | ColumnjuniIpsecTunnelRemoteIdAddr1 | read-create | current | The tunnel remote phase-2 identity IP address 1. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.22 | ColumnjuniIpsecTunnelRemoteIdAddr2 | read-create | current | The tunnel remote phase-2 identity IP address 2 in the case the identity type is an IP address range. The tunnel remote phase-2 identity netmask in the case th… |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.23 | ColumnjuniIpsecTunnelLifeTimeSecs | read-create | current | The tunnel lifetime in seconds. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.24 | ColumnjuniIpsecTunnelLifeTimeKBs | read-create | current | The tunnel lifetime in kilobytes. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.25 | ColumnjuniIpsecTunnelPfsGroup | read-create | current | The tunnel perfect forward secrecty group. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.26 | ColumnjuniIpsecTunnelMtu | read-create | current | The tunnel MTU. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.27 | ColumnjuniIpsecTunnelInboundSpi1 | read-only | current | The tunnel inbound SPI 1. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.28 | ColumnjuniIpsecTunnelInboundTransform1 | read-only | current | The tunnel inbound transform 1. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.29 | ColumnjuniIpsecTunnelInboundSpi2 | read-only | current | The tunnel inbound SPI 2. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.30 | ColumnjuniIpsecTunnelInboundTransform2 | read-only | current | The tunnel inbound transform 2. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.31 | ColumnjuniIpsecTunnelInboundSpi3 | read-only | current | The tunnel inbound SPI 3. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.32 | ColumnjuniIpsecTunnelInboundTransform3 | read-only | current | The tunnel inbound transform 3. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.33 | ColumnjuniIpsecTunnelInboundSpi4 | read-only | current | The tunnel inbound SPI 4. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.34 | ColumnjuniIpsecTunnelInboundTransform4 | read-only | current | The tunnel inbound transform 4. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.35 | ColumnjuniIpsecTunnelOutboundSpi | read-only | current | The tunnel outbound SPI. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.36 | ColumnjuniIpsecTunnelOutboundTransform | read-only | current | The tunnel outbound transform. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.37 | ColumnjuniIpsecTunnelRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.70.1.1.3 | TablejuniIpsecTunnelStatTable | not-accessible | current | The IPsec tunnel interface statistics table. Describes the IPsec tunnel inbound/outbound statistics on IPsec de/encapsulation, de/encryption, and related error… |
| 1.3.6.1.4.1.4874.2.2.70.1.1.3.1 | RowjuniIpsecTunnelStatEntry | not-accessible | current | Describes the ipsec traffic statistics of the ipsec tunnel interface. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.1 | ColumnjuniIpsecTunnelStatIfIndex | not-accessible | current | Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.2 | ColumnjuniIpsecTunnelStatInbUserRecvPkts | read-only | current | The total number of inbound user packets (non-error) received for this IPsec tunnel. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.3 | ColumnjuniIpsecTunnelStatInbUserRecvOctets | read-only | current | The total number of inbound user octets (non-error) received for this IPsec tunnel. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.4 | ColumnjuniIpsecTunnelStatInbAccRecvPkts | read-only | current | The total number of inbound encapsulated packets received for this IPsec tunnel. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.5 | ColumnjuniIpsecTunnelStatInbAccRecvOctets | read-only | current | The total number of inbound encapsulated octets received for this IPsec tunnel. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.6 | ColumnjuniIpsecTunnelStatInbAuthErrs | read-only | current | The total number of inbound packets with authentication errors received for this IPsec tunnel. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.7 | ColumnjuniIpsecTunnelStatInbReplayErrs | read-only | current | The total number of inbound packets with replay errors received for this IPsec tunnel. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.8 | ColumnjuniIpsecTunnelStatInbPolicyErrs | read-only | current | The total number of inbound packets with inbound policy errors received for this IPsec tunnel. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.9 | ColumnjuniIpsecTunnelStatInbOtherRecvErrs | read-only | current | The total number of inbound packets with other Rx errors received for this IPsec tunnel. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.10 | ColumnjuniIpsecTunnelStatInbDecryptErrs | read-only | current | The total number of inbound packets with decryption errors received for this IPsec tunnel. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.11 | ColumnjuniIpsecTunnelStatInbPadErrs | read-only | current | The total number of inbound packets with pad errors received for this IPsec tunnel. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.12 | ColumnjuniIpsecTunnelStatOutbUserRecvPkts | read-only | current | The total number of outbound user packets received for this IPsec tunnel. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.13 | ColumnjuniIpsecTunnelStatOutbUserRecvOctets | read-only | current | The total number of outbound user octets received for this IPsec tunnel. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.14 | ColumnjuniIpsecTunnelStatOutbAccRecvPkts | read-only | current | The total number of encapsulated outbound packets received for this IPsec tunnel. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.15 | ColumnjuniIpsecTunnelStatOutbAccRecvOctets | read-only | current | The total number of encapsulated outbound octets received for this IPsec tunnel. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.16 | ColumnjuniIpsecTunnelOutbOtherTxErrs | read-only | current | The total number of outbound packets with other TX errors for this IPsec tunnel. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.3.1.17 | ColumnjuniIpsecTunnelOutbPolicyErrs | read-only | current | The total number of outbound packets with outbound policy errors for this IPsec tunnel. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.4 | TablejuniIpsecTunnelTransformSetTable | not-accessible | current | This table contains entries of IPsec transform sets defined for this router. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.4.1 | RowjuniIpsecTunnelTransformSetEntry | not-accessible | current | Each entry describes a transform set that contains up to 6 IPsec transforms. The transform set name is referenced by the IPsec tunnel as its local IPsec policy. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.4.1.1 | ColumnjuniIpsecTunnelTransformSetName | not-accessible | current | The name of the IPsec tunnel transform set. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.4.1.2 | ColumnjuniIpsecTunnelTransform1 | read-create | current | The first IPsec transform in the transform set. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.4.1.3 | ColumnjuniIpsecTunnelTransform2 | read-create | current | The second IPsec transform in the transform set. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.4.1.4 | ColumnjuniIpsecTunnelTransform3 | read-create | current | The third IPsec transform in the transform set. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.4.1.5 | ColumnjuniIpsecTunnelTransform4 | read-create | current | The fourth IPsec transform in the transform set. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.4.1.6 | ColumnjuniIpsecTunnelTransform5 | read-create | current | The fifth IPsec transform in the transform set. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.4.1.7 | ColumnjuniIpsecTunnelTransform6 | read-create | current | The sixth IPsec transform in the transform set. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.4.1.8 | ColumnjuniIpsecTunnelTransformSetRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.70.1.1.5 | TablejuniIpsecTunnelGlobalLocalEndpointTable | not-accessible | current | This table contains entries of global local endpoint for the IPsec tunnel. There is one global local endpoint for each transport virtual router if configured. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.5.1 | RowjuniIpsecTunnelGlobalLocalEndpointEntry | not-accessible | current | Each entry defines the global local endpoint for the transport virtual router. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.5.1.1 | ColumnjuniIpsecTunnelTransportVrRouterIdx | not-accessible | current | The transport virtual router for the global local endpoint. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.5.1.2 | ColumnjuniIpsecTunnelGlobalLocalEndpoint | read-create | current | The global local endpoint for the transport virtual router. |
| 1.3.6.1.4.1.4874.2.2.70.1.1.5.1.3 | ColumnjuniIpsecTunnelGlobalLocalEndpointRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.70.1.2 | NodejuniIpsecSystem | |||
| 1.3.6.1.4.1.4874.2.2.70.1.2.1 | NodejuniIpsecTunnelSystemStats | |||
| 1.3.6.1.4.1.4874.2.2.70.1.2.1.1 | ScalarjuniIpsecSummaryStatsTotalTunnels | read-only | current | The total number of tunnels |
| 1.3.6.1.4.1.4874.2.2.70.1.2.1.2 | ScalarjuniIpsecSummaryStatsAdminStatusEnabled | read-only | current | The total number of tunnels with administrative status enabled |
| 1.3.6.1.4.1.4874.2.2.70.1.2.1.3 | ScalarjuniIpsecSummaryStatsAdminStatusDisabled | read-only | current | The total number of tunnels with administrative status disabled |
| 1.3.6.1.4.1.4874.2.2.70.1.2.1.4 | ScalarjuniIpsecSummaryStatsOperStatusUp | read-only | current | The total number of tunnels with operational status up |
| 1.3.6.1.4.1.4874.2.2.70.1.2.1.5 | ScalarjuniIpsecSummaryStatsOperStatusDown | read-only | current | The total number of tunnels with operational status down |
| 1.3.6.1.4.1.4874.2.2.70.1.2.1.6 | ScalarjuniIpsecSummaryStatsOperStatusNotPresent | read-only | current | The total number of tunnels with operational status not-present |
| 1.3.6.1.4.1.4874.2.2.70.2 | NodejuniIpsecTunnelMIBConformance | |||
| 1.3.6.1.4.1.4874.2.2.70.2.1 | NodejuniIpsecTunnelMIBCompliances | |||
| 1.3.6.1.4.1.4874.2.2.70.2.1.1 | CompliancejuniIpsecTunnelCompliance | obsolete | The compliance statement for SNMPv2 entities which implement the IPsec Tunnel MIB. | |
| 1.3.6.1.4.1.4874.2.2.70.2.1.2 | CompliancejuniIpsecTunnelCompliance2 | current | The compliance statement for SNMPv2 entities which implement the IPsec Tunnel MIB. | |
| 1.3.6.1.4.1.4874.2.2.70.2.2 | NodejuniIpsecTunnelMIBGroups | |||
| 1.3.6.1.4.1.4874.2.2.70.2.2.1 | GroupjuniIpsecTunnelConfigGroup | current | A collection of objects providing configuration information of the IPsec tunnel. | |
| 1.3.6.1.4.1.4874.2.2.70.2.2.2 | GroupjuniIpsecTunnelStatsGroup | current | A collection of objects providing satistics information of the IPsec tunnel. | |
| 1.3.6.1.4.1.4874.2.2.70.2.2.3 | GroupjuniIpsecTransformSetGroup | current | A collection of objects providing transform set information of the IPsec tunnel. | |
| 1.3.6.1.4.1.4874.2.2.70.2.2.4 | GroupjuniIpsecGlobalLocalEndpointGroup | current | A collection of objects providing the global local endpoint for the IPsec tunnel. | |
| 1.3.6.1.4.1.4874.2.2.70.2.2.5 | GroupjuniIpsecTunnelSystemStatsGroup | current | A collection of objects providing summary statistics information for IPsec tunnels in one system. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| JuniIpsecIdentityType | INTEGER { reserved(0), idIpv4Addr(1), idFqdn(2), idUserFqdn(3), idIpv4AddrSubnet(4), idIpv6Addr(5), idIpv6AddrSubnet(6), idIpv4AddrRange(7), idIpv6AddrRange(8), idDn(9), idDerAsn1Gn(10), idKeyId(11) } | current | The type of IPsec Phase-1 identity. The Phase-1 identity may be identified by one of the ID types defined in IPSEC DOI. |
| JuniIpsecPfsGroup | INTEGER { noGroup(0), group1(1), group2(2), group5(5) } | current | The perfect forward secrecy group. Group1 - 768-bit DH prime modulus group. Group2 - 1024-bit DH prime modulus group. Group5 - 1536-bit DH prime modulus group. |
| JuniIpsecTransformType | INTEGER { reserved(0), ahMd5(1), ahSha(2), espDesMd5(3), esp3DesMd5(4), espDesSha(5), esp3DesSha(6), espNullMd5(7), espNullSha(8), espDesNullAuth(9), esp3DesNullAuth(10) } | current | The transform algorithm for the IPsec tunnel. |
| JuniIpsecTunnelType | INTEGER { signaledTunnel(0), manualTunnel(1) } | current | The ipsec tunnel type. |
| Spi | Unsigned32 (0..4294967295) | current | The type of the SPI associated with IPsec Phase-2 security associations. |