Juniper-ISIS-MIB
217 objects
The intermediate system to intermediate system (IS-IS) routing protocol MIB for Juniper Networks E-series products. This MIB provides objects for management of the IS-IS Routing protocol, as described in ISO 10589, when it is used to construct routing tables for IP networks, as described in RFC 1195.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| Juniper-MIBs | juniMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.38 | IdentityjuniIsisMIB | The intermediate system to intermediate system (IS-IS) routing protocol MIB for Juniper Networks E-series products. This MIB provides objects for management of… | ||
| 1.3.6.1.4.1.4874.2.2.38.1 | NodejuniIsisObjects | |||
| 1.3.6.1.4.1.4874.2.2.38.1.1 | NodejuniIsisSystemGroup | |||
| 1.3.6.1.4.1.4874.2.2.38.1.1.1 | TablejuniIsisSysTable | not-accessible | current | The set of instances of the Integrated IS-IS protocol existing on the system. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1 | RowjuniIsisSysEntry | not-accessible | current | Each row defines information specific to a single instance of the protocol existing on the system. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.1 | ColumnjuniIsisSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.2 | ColumnjuniIsisSysVersion | read-only | current | The version number of the IS-IS protocol to which this instance conforms. This value must be set by the implementation when the row is valid. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.3 | ColumnjuniIsisSysType | read-write | current | The type of this instance of the Integrated IS-IS protocol. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.4 | ColumnjuniIsisSysID | read-write | current | The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the instance's area addresses to form the Network Entity Titles va… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.5 | ColumnjuniIsisSysMaxPathSplits | read-write | current | Maximum number of paths with equal routing metric value which it is permitted to split between. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.6 | ColumnjuniIsisSysMaxLSPGenInt | read-write | current | Maximum interval, in seconds, between generated LSPs by this instance. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.7 | ColumnjuniIsisSysOrigLSPBuffSize | read-write | current | The maximum size of LSPs and SNPs originated by this instance. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.8 | ColumnjuniIsisSysMaxAreaAddresses | read-only | current | The maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Systems in the same area must have … |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.9 | ColumnjuniIsisSysMinL1LSPGenInt | read-write | current | Minimum interval, in seconds, between successive generation of L1 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.10 | ColumnjuniIsisSysMinL2LSPGenInt | read-write | current | Minimum interval, in seconds, between successive generation of L2 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.11 | ColumnjuniIsisSysPollESHelloRate | read-only | current | The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.12 | ColumnjuniIsisSysWaitTime | read-only | current | Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.13 | ColumnjuniIsisSysOperState | read-write | current | The operational state of this instance of the Integrated IS-IS protocol. Setting this object to the value on when its current value is off enables operation of… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.14 | ColumnjuniIsisSysL1State | read-only | current | The state of the Level 1 database. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.15 | ColumnjuniIsisSysCorrLSPs | read-only | current | Number of corrupted LSPs detected. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.16 | ColumnjuniIsisSysLSPL1DbaseOloads | read-only | current | Number of times the LSP L1 database has become overloaded. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.17 | ColumnjuniIsisSysManAddrDropFromAreas | read-only | current | Number of times a manual address has been dropped from the area. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.18 | ColumnjuniIsisSysAttmptToExMaxSeqNums | read-only | current | Number of times the IS has attempted to exceed the maximum sequence number. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.19 | ColumnjuniIsisSysSeqNumSkips | read-only | current | Number of times a sequence number skip has occurred. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.20 | ColumnjuniIsisSysOwnLSPPurges | read-only | current | Number of times a zero-aged copy of the system's own LSP is received from some other node. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.21 | ColumnjuniIsisSysIDFieldLenMismatches | read-only | current | Number of times a PDU is received with a different value for ID field length to that of the receiving system. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.22 | ColumnjuniIsisSysMaxAreaAddrMismatches | read-only | current | Number of times a PDU is received with a different value for MaximumAreaAddresses from that of the receiving system. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.23 | ColumnjuniIsisSysOrigL2LSPBuffSize | read-write | obsolete | The maximum size of Level 2 LSPs and SNPs originated by this system. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.24 | ColumnjuniIsisSysL2State | read-only | current | The state of the Level 2 database. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.25 | ColumnjuniIsisSysLSPL2DbaseOloads | read-only | current | Number of times the Level 2 LSP database has become overloaded. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.26 | ColumnjuniIsisSysAuthFails | read-only | current | The number of authentication failures recognized by this instance of the protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.27 | ColumnjuniIsisSysLSPIgnoreErrors | read-write | current | If true, allow the router to ignore IS-IS link state packets (LSPs) that are received with internal checksum errors rather than purging the LSPs. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.28 | ColumnjuniIsisSysMaxAreaCheck | read-only | current | When on, enables checking of maximum area addresses per IS version of ISO10589. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.29 | ColumnjuniIsisSysSetOverloadBit | read-write | current | Isis overload bit |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.30 | ColumnjuniIsisSysSetOverloadBitStartupDuration | read-write | current | Specifies the length in time of seconds to set the overload bit from startup. This object must be set together with juniIsisSysSetOverloadBit, otherwise the ag… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.31 | ColumnjuniIsisSysMaxLspLifetime | read-write | current | Specifies the maximum time (in seconds) a LSP will remain in the box without being refreshed before being considered invalid. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.32 | ColumnjuniIsisSysL1SpfInterval | read-write | current | Minimum interval, in seconds, between level 1 SPF calculations. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.33 | ColumnjuniIsisSysL2SpfInterval | read-write | current | Minimum interval, in seconds, between level 2 SPF calculations. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.34 | ColumnjuniIsisSysIshHoldTime | read-write | current | Specify a holdtime advertised in ESH/ISH PDUs. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.35 | ColumnjuniIsisSysIshConfigTimer | read-write | current | Specify the rate of transmission for ESH and ISH packets. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.36 | ColumnjuniIsisSysDistributeDomainWide | read-write | current | When on, enables distribution of prefixes throughout a multi-level domain. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.37 | ColumnjuniIsisSysDistance | read-write | current | The weight applied to IS-IS routes. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.38 | ColumnjuniIsisSysL1MetricStyle | read-write | current | Specifies the type of IP reachability TLV to advertise in level 1 LSPs. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.39 | ColumnjuniIsisSysL2MetricStyle | read-write | current | Specifies the type of IP reachability TLV to advertise in level 2 LSPs. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.40 | ColumnjuniIsisSysIsoRouteTag | read-write | current | The ISO routing area tag. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.41 | ColumnjuniIsisSysMplsTeLevel | read-write | current | Select flooding of MPLS traffic engineering link information into the specified ISIS level. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.42 | ColumnjuniIsisSysMplsTeRtrIdIfIndex | read-write | current | Configure the stable router interface ID to designate it as TE capable. A value of zero is used to remove any configured router interface ID. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.43 | ColumnjuniIsisSysMplsTeSpfUseAnyBestPath | read-write | current | Configure whether or not to consider spf paths when alternate tunnel path exists |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.44 | ColumnjuniIsisSysReferenceBandwidth | read-write | current | Configure the reference bandwitdth used to calculate the link cost in bits per second.If the reference bandwidth is greater than the maximum value reportable b… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.45 | ColumnjuniIsisSysHighReferenceBandwidth | read-write | current | Configure the reference bandwitdth in mega bits per second. It is used to calculate the link cost. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.2 | TablejuniIsisManAreaAddrTable | not-accessible | current | The set of manual area addresses configured on this Intermediate System. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.2.1 | RowjuniIsisManAreaAddrEntry | not-accessible | current | Each entry contains one area address manually configured on this system. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.2.1.1 | ColumnjuniIsisManAreaAddrSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.2.1.2 | ColumnjuniIsisManAreaAddr | not-accessible | current | A manually configured area address for this system. This object follows the index behaviour. Note: an index for the entry {1, {49.0001} active} in this table w… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.2.1.3 | ColumnjuniIsisManAreaAddrRowStatus | read-create | current | The state of the juniIsisManAreaAddrEntry. This object follows the RowStatus behaviour. If an attempt is made to set this object to the value off when the corr… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.3 | TablejuniIsisSysProtSuppTable | not-accessible | current | This table contains the manually configured set of protocols supported by each instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.3.1 | RowjuniIsisSysProtSuppEntry | not-accessible | current | Each entry contains one protocol supported by an instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.3.1.1 | ColumnjuniIsisSysProtSuppSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.3.1.2 | ColumnjuniIsisSysProtSuppProtocol | not-accessible | current | One supported protocol. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.3.1.3 | ColumnjuniIsisSysProtSuppRowStatus | read-only | current | The state of the juniIsisSysProtSuppEntry. This object follows the RowStatus behavior. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4 | TablejuniIsisSummAddrTable | not-accessible | current | The set of IP summary addresses to use in forming the contents of Level 2 LSPs originated by this level 2 Intermediate System. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1 | RowjuniIsisSummAddrEntry | not-accessible | current | Each entry contains one IP summary address. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.1 | ColumnjuniIsisSummAddrSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviours. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.2 | ColumnjuniIsisSummAddress | not-accessible | current | The IP Address value for this summary address. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.3 | ColumnjuniIsisSummAddrMask | not-accessible | current | The mask value for this summary address. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.4 | ColumnjuniIsisSummAddrRowStatus | read-create | current | The existence state of this summary address. This object follows the RowStatus behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.5 | ColumnjuniIsisSummAddrOperState | read-create | current | The operational state of this entry. This object follows the operationalState behaviour. When the operational state changes if this would cause the contents of… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.6 | ColumnjuniIsisSummAddrDefaultMetric | read-create | current | The default metric value to announce this summary address with in Level 1 or 2 LSPs generated by this system. A Metric value of 0 indicates to use the lowest m… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.7 | ColumnjuniIsisSummAddrDelayMetric | read-only | current | The delay metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metr… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.8 | ColumnjuniIsisSummAddrExpenseMetric | read-only | current | The expense metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this me… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.9 | ColumnjuniIsisSummAddrErrorMetric | read-only | current | The error metric value to announce this summary address with in Level n LSPs generated by this system. The value of zero is reserved to indicate that this metr… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.10 | ColumnjuniIsisSummLevel | read-create | current | The level of database at which to annouce this summary. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.5 | TablejuniIsisSysHostNameTable | not-accessible | current | This table contains the manually configured set of host name to system ID aliases supported by each instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.5.1 | RowjuniIsisSysHostNameEntry | not-accessible | current | Each entry contains one name to system ID alias supported by an instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.1 | ColumnjuniIsisSysHostNameSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.2 | ColumnjuniIsisSysHostNameSysId | not-accessible | current | The ID for the system which this name will be assigned. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.3 | ColumnjuniIsisSysHostNameAreaAddr | read-create | current | A configured area address for the system which this name will be assigned. This object follows the index behaviour. Note: an index for the entry {1, {49.0001} … |
| 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.4 | ColumnjuniIsisSysHostNameName | read-write | current | A string to use when displaying system data with this system ID. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.5 | ColumnjuniIsisSysHostNameType | read-only | current | The type of host name entry. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.6 | ColumnjuniIsisSysHostNameRowStatus | read-write | current | The status of this host name entry. This object follows the RowStatus behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6 | TablejuniIsisSysAreaAuthenticationTable | not-accessible | current | This table contains the manually configured set of area authentication keys supported by each instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6.1 | RowjuniIsisSysAreaAuthenticationEntry | not-accessible | current | Each entry contains one area authentication key supported by an instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.1 | ColumnjuniIsisSysAreaAuthenticationSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.2 | ColumnjuniIsisSysAreaAuthenticationKeyId | not-accessible | current | The unique identifier of the instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.3 | ColumnjuniIsisSysAreaAuthenticationPwd | read-write | current | The value to be used as the Authentication Key in Level 1 Link State Packets whenever the value of juniIsisSysAreaAuthenticationKeyType has a value of plaintex… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.4 | ColumnjuniIsisSysAreaAuthenticationKeyType | read-write | current | What authentication scheme, if any, is used to protect Level 1 Link State packets and sequence number packets |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.5 | ColumnjuniIsisSysAreaAuthenticationStartAcceptTime | read-write | current | The date and time when this authentication key will start to be used to validate level 1 LSPs and SNPs received. The Default value the start accept time will b… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.6 | ColumnjuniIsisSysAreaAuthenticationStartGenerateTime | read-write | current | The date and time when this authentication key will start to be used to authenticate level 1 LSPs and SNPs transmitted. The Default value the start accept time… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.7 | ColumnjuniIsisSysAreaAuthenticationStopAcceptTime | read-write | current | The date and time when this authentication key will stop being accepted as a valid level 1 LSP and SNP key received. A value of zero indicates the key will nev… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.8 | ColumnjuniIsisSysAreaAuthenticationStopGenerateTime | read-write | current | The date and time when this authentication key will stop being used to authenticate level 1 LSPs and SNPs transmitted. A value of zero indicates the key will n… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.9 | ColumnjuniIsisSysAreaAuthenticationRowStatus | read-write | current | The existence state of this authentication key. This object follows the RowStatus behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7 | TablejuniIsisSysDomainAuthenticationTable | not-accessible | current | This table contains the manually configured set of domain authentication keys supported by each instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7.1 | RowjuniIsisSysDomainAuthenticationEntry | not-accessible | current | Each entry contains one domain authentication key supported by an instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.1 | ColumnjuniIsisSysDomainAuthenticationSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.2 | ColumnjuniIsisSysDomainAuthenticationKeyId | not-accessible | current | The unique identifier of the instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.3 | ColumnjuniIsisSysDomainAuthenticationPwd | read-write | current | The value to be used as the Authentication Key in Level 2 Link State Packets whenever the value of juniIsisSysDomainAuthenticationKeyType has a value of plaint… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.4 | ColumnjuniIsisSysDomainAuthenticationKeyType | read-write | current | What authentication scheme, if any, is used to protect Level 2 Link State packets and Sequence Number packets |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.5 | ColumnjuniIsisSysDomainAuthenticationStartAcceptTime | read-write | current | The date and time when this authentication key will start to be used to validate level 2 LSPs and SNPs received. The Default value the start accept time will b… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.6 | ColumnjuniIsisSysDomainAuthenticationStartGenerateTime | read-write | current | The date and time when this authentication key will start to be used to authenticate level 2 LSPs and SNPs transmitted. The Default value the start accept time… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.7 | ColumnjuniIsisSysDomainAuthenticationStopAcceptTime | read-write | current | The date and time when this authentication key will stop being accepted as a valid level 2 LSP and SNP key received. A value of zero indicates the key will nev… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.8 | ColumnjuniIsisSysDomainAuthenticationStopGenerateTime | read-write | current | The date and time when this authentication key will stop being used to authenticate level 2 LSPs and SNPs transmitted. A value of zero indicates the key will n… |
| 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.9 | ColumnjuniIsisSysDomainAuthenticationRowStatus | read-write | current | The existence state of this authentication key. This object follows the RowStatus behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.8 | TablejuniIsisMplsTeTunnelTable | not-accessible | current | The set of tunnels imported from MPLS. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.8.1 | RowjuniIsisMplsTeTunnelEntry | not-accessible | current | Each entry contains metric details of an MPLS LSP |
| 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.1 | ColumnjuniIsisMplsTeTunnelSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.2 | ColumnjuniIsisMplsNextHopIndex | not-accessible | current | An index to uniquely identify the tunnels. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.3 | ColumnjuniIsisMplsTeSystemId | read-only | current | The ID for the instance of the Integrated IS-IS protocol running in the tunnel's end point. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.4 | ColumnjuniIsisMplsTeRouterId | read-only | current | The router ID of the tunnel's end point. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.5 | ColumnjuniIsisMplsTeTunnelMetric | read-only | current | The metric associated with the tunnel. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.6 | ColumnjuniIsisMplsTeTunnelRelMetric | read-only | current | The metric associated with the tunnel relative to the spf path. |
| 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.7 | ColumnjuniIsisMplsTeTunnelName | read-only | current | The name associated with the tunnel. |
| 1.3.6.1.4.1.4874.2.2.38.1.2 | NodejuniIsisCircuitGroup | |||
| 1.3.6.1.4.1.4874.2.2.38.1.2.1 | TablejuniIsisCircTable | not-accessible | current | The table of circuits used by each instance of Integrated IS-IS on this system. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1 | RowjuniIsisCircEntry | not-accessible | current | An juniIsisCircEntry exists for each circuit used by Integrated IS-IS on this system. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.1 | ColumnjuniIsisCircSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.2 | ColumnjuniIsisCircIfIndex | not-accessible | current | The value of ifIndex for the interface to which this circuit corresponds. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.3 | ColumnjuniIsisCircLocalID | read-only | current | An identification that can be used in protocol packets to identify a circuit. Implementations may devise ways to assure that this value is suitable for the cir… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.4 | ColumnjuniIsisCircOperState | read-write | current | The operational state of the circuit. This object follows the operationalState behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.5 | ColumnjuniIsisCircRowStatus | read-write | current | The existence state of this circuit. This object follows the RowStatus behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.6 | ColumnjuniIsisCircType | read-only | current | The type of the circuit. This object follows the replaceOnlyWhileDisabled behaviour. The type specified must be compatible with the type of the interface defin… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.7 | ColumnjuniIsisCircL1DefaultMetric | read-write | current | The default metric value of this circuit for Level 1 traffic. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.8 | ColumnjuniIsisCircL1DelayMetric | read-only | current | The delay metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.9 | ColumnjuniIsisCircL1ExpenseMetric | read-only | current | The expense metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.10 | ColumnjuniIsisCircL1ErrorMetric | read-only | current | The error metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.11 | ColumnjuniIsisCircExtDomain | read-only | current | If true, suppress normal transmission of and interpretation of Intra-domain ISIS PDUs on this circuit. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.12 | ColumnjuniIsisCircAdjChanges | read-only | current | The number of times an adjacency state change has occurred on this circuit. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.13 | ColumnjuniIsisCircInitFails | read-only | current | The number of times initialization of this circuit has failed. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.14 | ColumnjuniIsisCircRejAdjs | read-only | current | The number of times an adjacency has been rejected on this circuit. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.15 | ColumnjuniIsisCircOutCtrlPDUs | read-only | current | The number of IS-IS control PDUs sent on this circuit. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.16 | ColumnjuniIsisCircInCtrlPDUs | read-only | current | The number of IS-IS control PDUs received on this circuit. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.17 | ColumnjuniIsisCircIDFieldLenMismatches | read-only | current | The number of times an IS-IS control PDU with an ID field length different to that for this system has been received. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.18 | ColumnjuniIsisCircL2DefaultMetric | read-write | current | The default metric value of this circuit for level 2 traffic. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.19 | ColumnjuniIsisCircL2DelayMetric | read-only | current | The delay metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.20 | ColumnjuniIsisCircL2ExpenseMetric | read-only | current | The expense metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.21 | ColumnjuniIsisCircL2ErrorMetric | read-only | current | The error metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.22 | ColumnjuniIsisCircManL2Only | read-only | current | When true, indicates that this circuit is to be used only for level 2. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.23 | ColumnjuniIsisCircL1ISPriority | read-write | current | The priority for becoming LAN Level 1 Deignated Intermediate System on a broadcast circuit. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.24 | ColumnjuniIsisCircL1CircID | read-only | current | The LAN ID allocated by the LAN Level 1 Designated Intermediate System. Where this system is not aware of the value (because it is not participating in the Lev… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.25 | ColumnjuniIsisCircL1DesIS | read-only | current | The ID of the LAN Level 1 Designated Intermediate System on this circuit. If, for any reason this system is not partaking in the relevant Designated Intermedia… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.26 | ColumnjuniIsisCircLANL1DesISChanges | read-only | current | The number of times the LAN Level 1 Designated Intermediate System has changed. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.27 | ColumnjuniIsisCircL2ISPriority | read-write | current | The priority for becoming LAN level 2 Designated Intermediate System. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.28 | ColumnjuniIsisCircL2CircID | read-only | current | The LAN ID allocated by the LAN Level 2 Designated Intermediate System. Where this system is not aware of this value (because it is not participating in the Le… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.29 | ColumnjuniIsisCircL2DesIS | read-only | current | The ID of the LAN Level 2 Designated Intermediate System on this circuit. If, for any reason, this system is not partaking in the relevant Designated Intermedi… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.30 | ColumnjuniIsisCircLANL2DesISChanges | read-only | current | The number of times the LAN Level 2 Designated Intermediate System has changed. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.31 | ColumnjuniIsisCircMCAddr | read-only | current | Specifies which type of multicast address will be used for sending HELLO PDUs on this circuit. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.32 | ColumnjuniIsisCircPtToPtCircID | read-only | current | The ID of the circuit allocated during initialization. If no value has been negotiated (either because the adjacency is to an End System, or because initializa… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.33 | ColumnjuniIsisCircL1HelloTimer | read-write | current | Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess networks. It is also used as the period between Hellos on point to point circuits. This obj… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.34 | ColumnjuniIsisCircL2HelloTimer | read-write | current | Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess networks. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.35 | ColumnjuniIsisCircL1HelloMultiplier | read-write | current | This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used b… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.36 | ColumnjuniIsisCircL2HelloMultiplier | read-write | current | This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used b… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.37 | ColumnjuniIsisCircMinLSPTransInt | read-write | current | Minimum interval, in milliseconds, between transmission of LSPs on a circuit. This object follows the resettingTimer behaviour. This timer shall be capable of … |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.38 | ColumnjuniIsisCircMinLSPReTransInt | read-write | current | Minimum interval, in seconds, between re-transmission of an Level 1 or 2 LSP. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.39 | ColumnjuniIsisCircL1CSNPInterval | read-write | current | Interval of time, in seconds, between transmission of Level 1 CSNPs on multiaccess networks if this router is the designated router. On point-to-point networks… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.40 | ColumnjuniIsisCircL2CSNPInterval | read-write | current | Interval of time, in seconds, between transmission of Level 2 CSNPs on multiaccess networks if this router is the designated router. On point-to-point networks… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.41 | ColumnjuniIsisCircLSPThrottle | read-write | current | Minimal interval of time, in milliseconds, between retransmissions of LSPs on a point to point interface. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.42 | ColumnjuniIsisCircMeshGroupEnabled | read-write | current | Is this port a member of a mesh group, or blocked? Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh gro… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.43 | ColumnjuniIsisCircMeshGroup | read-write | current | Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the sa… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.44 | ColumnjuniIsisCircLevel | read-write | current | The type of this circuit. This object follows the replaceOnlyWhileDisabled behavior. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.45 | ColumnjuniIsisCircState | read-only | current | The operational state of the circuit. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2 | TablejuniIsisSysL1CircAuthenticationTable | not-accessible | current | This table contains the manually configured set of Level 1 Circuit authentication keys supported by each instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1 | RowjuniIsisSysL1CircAuthenticationEntry | not-accessible | current | Each entry contains one Level 1 circuit authentication key supported by an instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.1 | ColumnjuniIsisSysL1CircAuthenticationSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.2 | ColumnjuniIsisSysL1CircAuthenticationIfIndex | not-accessible | current | The value of ifIndex for the interface to which this circuit corresponds. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.3 | ColumnjuniIsisSysL1CircAuthenticationKeyId | not-accessible | current | The unique identifier of the instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.4 | ColumnjuniIsisSysL1CircAuthenticationPwd | read-write | current | The value to be used as the Authentication Key in Level 1 Hello Packets whenever the value of juniIsisSysL1CircAuthenticationKeyType has a value of hmacMd5. A … |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.5 | ColumnjuniIsisSysL1CircAuthenticationKeyType | read-write | current | What authentication scheme, if any, is used to protect Level 1 hello packets. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.6 | ColumnjuniIsisSysL1CircAuthenticationStartAcceptTime | read-write | current | The date and time when this authentication key will start to be used to validate level 1 IIH packets received. The Default value the start accept time will be … |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.7 | ColumnjuniIsisSysL1CircAuthenticationStartGenerateTime | read-write | current | The date and time when this authentication key will start to be used to authenticate level 1 IIH packets transmitted. The Default value the start accept time w… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.8 | ColumnjuniIsisSysL1CircAuthenticationStopAcceptTime | read-write | current | The date and time when this authentication key will stop being accepted as a valid level 1 IIH packets key received. A value of zero indicates the key will nev… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.9 | ColumnjuniIsisSysL1CircAuthenticationStopGenerateTime | read-write | current | The date and time when this authentication key will stop being used to authenticate level 1 IIH packets transmitted. A value of zero indicates the key will nev… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.10 | ColumnjuniIsisSysL1CircAuthenticationRowStatus | read-write | current | The existence state of this authentication key. This object follows the RowStatus behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3 | TablejuniIsisSysL2CircAuthenticationTable | not-accessible | current | This table contains the manually configured set of Level 2 Circuit authentication keys supported by each instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1 | RowjuniIsisSysL2CircAuthenticationEntry | not-accessible | current | Each entry contains one Level 2 circuit authentication key supported by an instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.1 | ColumnjuniIsisSysL2CircAuthenticationSysInstance | not-accessible | current | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.2 | ColumnjuniIsisSysL2CircAuthenticationIfIndex | not-accessible | current | The value of ifIndex for the interface to which this circuit corresponds. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.3 | ColumnjuniIsisSysL2CircAuthenticationKeyId | not-accessible | current | The unique identifier of the instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.4 | ColumnjuniIsisSysL2CircAuthenticationPwd | read-write | current | The value to be used as the Authentication Key in Level 2 Hello Packets whenever the value of juniIsisSysL2CircAuthenticationKeyType has a value of hmacMd5. A … |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.5 | ColumnjuniIsisSysL2CircAuthenticationKeyType | read-write | current | What authentication scheme, if any, is used to protect Level 2 hello packets. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.6 | ColumnjuniIsisSysL2CircAuthenticationStartAcceptTime | read-write | current | The date and time when this authentication key will start to be used to validate level 2 IIH packets received. The Default value the start accept time will be … |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.7 | ColumnjuniIsisSysL2CircAuthenticationStartGenerateTime | read-write | current | The date and time when this authentication key will start to be used to authenticate level 2 IIH packets transmitted. The Default value the start accept time w… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.8 | ColumnjuniIsisSysL2CircAuthenticationStopAcceptTime | read-write | current | The date and time when this authentication key will stop being accepted as a valid level 2 IIH packets key received. A value of zero indicates the key will nev… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.9 | ColumnjuniIsisSysL2CircAuthenticationStopGenerateTime | read-write | current | The date and time when this authentication key will stop being used to authenticate level 2 IIH packets transmitted. A value of zero indicates the key will nev… |
| 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.10 | ColumnjuniIsisSysL2CircAuthenticationRowStatus | read-write | current | The existence state of this authentication key. This object follows the RowStatus behaviour. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.4 | TablejuniIsisCircBFDTable | not-accessible | current | The Juniper ISIS circuit table describes the BFD-specific characteristics of interfaces. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.4.1 | RowjuniIsisCircBFDEntry | not-accessible | current | The Juniper ISIS circuit table describes the BFD-specific characteristics of one interface. |
| 1.3.6.1.4.1.4874.2.2.38.1.2.4.1.1 | ColumnjuniIsisCircBfdEnable | read-create | current | This variable indicates whether BFD session on the interface is active or not |
| 1.3.6.1.4.1.4874.2.2.38.1.2.4.1.2 | ColumnjuniIsisCircBfdMinRxInterval | read-create | current | This variable specifies upper-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds] |
| 1.3.6.1.4.1.4874.2.2.38.1.2.4.1.3 | ColumnjuniIsisCircBfdMinTxInterval | read-create | current | This variable specifies lower-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds] |
| 1.3.6.1.4.1.4874.2.2.38.1.2.4.1.4 | ColumnjuniIsisCircBfdMultiplier | read-create | current | This variable specifies detection-multiplier |
| 1.3.6.1.4.1.4874.2.2.38.2 | NodejuniIsisTrapGroup | |||
| 1.3.6.1.4.1.4874.2.2.38.3 | NodejuniIsisConformance | |||
| 1.3.6.1.4.1.4874.2.2.38.3.1 | NodejuniIsisCompliances | |||
| 1.3.6.1.4.1.4874.2.2.38.3.1.1 | CompliancejuniIsisCompliance | obsolete | Obsolete compliance statement for systems supporting ISIS functionality. This statement became obsolete when the juniIsisCircState object was added. | |
| 1.3.6.1.4.1.4874.2.2.38.3.1.2 | CompliancejuniIsisCompliance2 | obsolete | Obsolete compliance statement for systems supporting ISIS functionality. This statement became obsolete when MPSL support was added. | |
| 1.3.6.1.4.1.4874.2.2.38.3.1.3 | CompliancejuniIsisCompliance3 | obsolete | The compliance statement for systems supporting ISIS functionality. This statement became obsolete when juniIsisCircBFDTable is implemented. | |
| 1.3.6.1.4.1.4874.2.2.38.3.1.4 | CompliancejuniIsisCompliance4 | obsolete | The compliance statement for systems supporting ISIS functionality. | |
| 1.3.6.1.4.1.4874.2.2.38.3.1.5 | CompliancejuniIsisCompliance5 | obsolete | The compliance statement for systems supporting ISIS functionality. | |
| 1.3.6.1.4.1.4874.2.2.38.3.1.6 | CompliancejuniIsisCompliance6 | current | The compliance statement for systems supporting ISIS functionality. | |
| 1.3.6.1.4.1.4874.2.2.38.3.2 | NodejuniIsisMIBGroups | |||
| 1.3.6.1.4.1.4874.2.2.38.3.2.1 | GroupjuniIsisSystemMgmtGroup | obsolete | Obsolete system level objects for ISIS management functionality. This group became obsolete when the MPLS management objects were added. | |
| 1.3.6.1.4.1.4874.2.2.38.3.2.2 | GroupjuniIsisCircuitMgmtGroup | obsolete | Obsolete circuit management objects. This group became obsolete when the juniIsisCircState object was added. | |
| 1.3.6.1.4.1.4874.2.2.38.3.2.3 | GroupjuniIsisCircuitMgmtGroup2 | current | The circuit management objects. | |
| 1.3.6.1.4.1.4874.2.2.38.3.2.4 | GroupjuniIsisSystemMgmtGroup2 | obsolete | Obsolete system level objects for ISIS management functionality. This group became obsolete when the MPLS tunnel table was added. | |
| 1.3.6.1.4.1.4874.2.2.38.3.2.5 | GroupjuniIsisCircBFDGroup | current | The circuit level ISIS BFD configuration parameters. | |
| 1.3.6.1.4.1.4874.2.2.38.3.2.6 | GroupjuniIsisSystemMgmtGroup3 | obsolete | Obsolete system level objects for ISIS management functionality. This group became obsolete when the reference bandwidth related variables were added. | |
| 1.3.6.1.4.1.4874.2.2.38.3.2.7 | GroupjuniIsisSystemMgmtGroup4 | current | The system level objects for ISIS management functionality. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AuthTime | Integer32 | current | Then number of seconds since Jan. 1 1970. |
| CircuitID | OCTET STRING (SIZE(2..9)) | current | ID for a circuit. |
| ISPriority | Integer32 (1..127) | current | Integer sub-range for ISIS priority. |
| JuniDefaultMetric | Integer32 (0..16777215) | current | Integer sub-range for default metric for single hop. The value is truncated to 63 when the juniIsisSysL1MetricStyle or juniIsisSysL2MetricStyle is set to juniIsisMetricStyleNarrow |
| LevelState | INTEGER { off(1), on(2), waiting(3) } | current | States of the ISIS protocol. |
| LSPBuffSize | Integer32 (512..9180) | current | Integer sub range for LSP size. |
| OperState | INTEGER { off(1), on(2) } | current | Type used in enabling and disabling a row. |
| OSINSAddress | OCTET STRING (SIZE(0..20)) | current | OSI Network Service Address, e.g. NSAP, Network Entity Title |
| OtherMetric | Integer32 (0..63) | current | Integer sub-range for metrics other than the default metric for single hop. |
| SupportedProtocol | INTEGER { iso8473(129), ip(204), ipV6(205) } | current | Types of network protocol supported by Integrated ISIS. The values for ISO8473 and IP are those registered for these protocols in ISO TR9577. |
| SystemID | OCTET STRING (SIZE(6)) | current | A system ID of exactly six bytes. Must not be all zeros. |