Juniper-L2TP-MIB
280 objects
The L2TP MIB for the Juniper Networks enterprise.
Imported Objects
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniEnable |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.35 | IdentityjuniL2tpMIB | The L2TP MIB for the Juniper Networks enterprise. | ||
| 1.3.6.1.4.1.4874.2.2.35.0 | NodejuniL2tpTraps | |||
| 1.3.6.1.4.1.4874.2.2.35.1 | NodejuniL2tpObjects | |||
| 1.3.6.1.4.1.4874.2.2.35.1.1 | NodejuniL2tpSystem | |||
| 1.3.6.1.4.1.4874.2.2.35.1.1.1 | NodejuniL2tpSystemConfig | |||
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.1 | ScalarjuniL2tpSysConfigAdminState | read-write | current | Exerts control over all L2TP tunnels/sessions in the system. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.2 | ScalarjuniL2tpSysConfigDestructTimeout | read-write | current | The amount of time, in seconds, to preserve dynamic tunnels/sessions after they become inactive, e.g. to poll their statistics. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.3 | ScalarjuniL2tpSysConfigIpChecksumEnable | read-write | current | Enable/disable IP checksumming for tunnels with UDP/IP transport. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.4 | ScalarjuniL2tpSysConfigTunnelSwitchingEnabled | read-write | current | Tunnel switching enabled/disable. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.5 | ScalarjuniL2tpSysConfigControlRetransmissions | read-write | deprecated | The number of retransmission retries allowed before control connection goes down. This object has been replaced by juniL2tpSysConfigControlRetransmissionsEstab… |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.6 | ScalarjuniL2tpSysConfigTunnelIdleTimeout | read-write | current | Idle tunnel remains active for the specified amount of time; value 0 disables the timer i.e. tunnel becomes persistent. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.7 | ScalarjuniL2tpSysConfigReceiveDataSequencingIgnore | read-write | current | Enable/disable ignoring of receive sequencing of L2TP data packets. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.8 | ScalarjuniL2tpSysConfigFailoverWithinPreference | read-write | current | Enable/disable fail-over within a preference level. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.9 | ScalarjuniL2tpSysConfigWeightedLoadBalancing | read-write | current | Enable/disable weighted load balancing. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.10 | ScalarjuniL2tpSysConfigControlRetransmissionsEstablished | read-write | current | It represents number of retries allowed for established tunnels before control connection goes down. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.11 | ScalarjuniL2tpSysConfigControlRetransmissionsNotEstablished | read-write | current | It represents number of retries allowed for unestablished tunnels before control connection goes down. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.12 | ScalarjuniL2tpSysConfigDisableChallenge | read-write | current | Disable inclusion of chap challenge in the outgoing packets. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.13 | ScalarjuniL2tpSysConfigDisableCallingNumberAvp | read-write | current | Enable/disable inclusion of calling number avp in ICRQ packet. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.14 | ScalarjuniL2tpSysConfigIgnoreTxAddressChange | read-write | current | Configure L2TP to ignore IP address and/or UDP port changes on incoming SCCRP messages. When this feature is enabled the L2TP tunnel may have separate receive … |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.15 | ScalarjuniL2tpSysConfigEnableDisconnectCauseAvp | read-write | current | Enable/disable inclusion of L2TP PPP Disconnect Cause AVP in CDN packet. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.16 | ScalarjuniL2tpSysConfigReceiveWindowSize | read-write | current | Configure the global L2TP receive window size. A value of 0 indicates the system chooses the RWS. This object may be overwritten by other more specific RWS set… |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.17 | ScalarjuniL2tpSysConfigEnableRxSpeedAvpWhenEqual | read-write | current | Enable/disable generation of L2TP RX speed AVP when RX and TX speeds are equal. Note the RX speed is always generated when the RX and TX speeds differ. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.18 | ScalarjuniL2tpSysConfigRejectTxAddressChange | read-write | current | Configure L2TP to reject IP address and/or UDP port changes on incomming SCCRP messages. disable(0) - address change is allowed ipAddressAndUdpPort(1)- reject … |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.19 | ScalarjuniL2tpSysConfigShortDrainTimeout | read-write | current | Configure the L2TP short drain interval. This interval represents the time a tunnel, that is already draining, will continue to drain upon receiving a start re… |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.20 | ScalarjuniL2tpSysConfigDestinationLockoutTestEnabled | read-write | current | Enable/disable testing of failed destiantion before removing lockout. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.21 | ScalarjuniL2tpSysConfigDestinationLockoutTimeout | read-write | current | Failed destination remains locked out for the specified amount of time. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.22 | ScalarjuniL2tpSysConfigFailoverResync | read-write | current | Configure L2TP failover resync mechanism. disable(0) - Disable failover resync failoverProtocol(1) - Use the L2TP Failover Protocol silentFailover(2) - Use the… |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2 | NodejuniL2tpSystemStatus | |||
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.1 | ScalarjuniL2tpSysStatusProtocolVersion | read-only | current | Vector of supported L2TP protocol version and revision numbers. Supported versions are identified via a two octet pairing where the first octet indicates the v… |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.2 | ScalarjuniL2tpSysStatusVendorName | read-only | current | Vendor name of the L2TP protocol stack. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.3 | ScalarjuniL2tpSysStatusFirmwareRev | read-only | current | Firmware revision for the L2TP protocol stack. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.4 | ScalarjuniL2tpSysStatusTotalDestinations | read-only | current | Number of destination creations attempted. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.5 | ScalarjuniL2tpSysStatusFailedDestinations | read-only | current | Number of destination creation attempts that failed. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.6 | ScalarjuniL2tpSysStatusActiveDestinations | read-only | current | Number of destinations having at least one active tunnel. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.7 | ScalarjuniL2tpSysStatusTotalTunnels | read-only | current | Number of tunnel creations attempted. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.8 | ScalarjuniL2tpSysStatusFailedTunnels | read-only | current | Number of tunnel creation attempts that failed to reach the established state. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.9 | ScalarjuniL2tpSysStatusFailedTunnelAuthens | read-only | current | Number of tunnel creation attempts that failed authentication. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.10 | ScalarjuniL2tpSysStatusActiveTunnels | read-only | current | Number of tunnels currently established. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.11 | ScalarjuniL2tpSysStatusTotalSessions | read-only | current | Number of session creations attempted. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.12 | ScalarjuniL2tpSysStatusFailedSessions | read-only | current | Number of session creation attempts that failed to reach the established state. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.13 | ScalarjuniL2tpSysStatusActiveSessions | read-only | current | Number of sessions currently established. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.14 | ScalarjuniL2tpSysStatusTotalSwitchedSessions | read-only | current | Number of switched session creations attempted. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.15 | ScalarjuniL2tpSysStatusFailedSwitchedSessions | read-only | current | Number of switched session creation attempts that failed to reach the established state. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.16 | ScalarjuniL2tpSysStatusActiveSwitchedSessions | read-only | current | Number of switched sessions currently established. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.17 | ScalarjuniL2tpSysStatusIfCounterDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of the system-level status and statistics suffered a discontinuity. If no such disc… |
| 1.3.6.1.4.1.4874.2.2.35.1.2 | NodejuniL2tpDestination | |||
| 1.3.6.1.4.1.4874.2.2.35.1.2.1 | NodejuniL2tpDestConfig | |||
| 1.3.6.1.4.1.4874.2.2.35.1.2.1.2 | TablejuniL2tpDestConfigTable | not-accessible | current | The L2TP destination configuration table. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in juniL2tpDestStatsTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1 | RowjuniL2tpDestConfigEntry | not-accessible | current | Describes the configuration attributes of an L2TP destination. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1.1 | ColumnjuniL2tpDestConfigIfIndex | not-accessible | current | Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1.2 | ColumnjuniL2tpDestConfigRowStatus | read-create | current | An implementation may choose not to support administrative configuration of tunnels. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1.3 | ColumnjuniL2tpDestConfigAdminState | read-create | current | The configured administrative state. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1.4 | ColumnjuniL2tpDestConfigLockoutAction | read-create | current | The lockout action to be applied to a destination. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2 | NodejuniL2tpDestStatus | |||
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1 | TablejuniL2tpDestStatusTable | not-accessible | current | The L2TP destination status table. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in juniL2tpDestConfigTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1 | RowjuniL2tpDestStatusEntry | not-accessible | current | Describes the status attributes of an L2TP destination. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.1 | ColumnjuniL2tpDestStatusIfIndex | not-accessible | current | Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.2 | ColumnjuniL2tpDestStatusTransport | read-only | current | The underlying transport over which this L2TP destination is carried. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.3 | ColumnjuniL2tpDestStatusEffectiveAdminState | read-only | current | The administrative state currently in effect. This could be the configured admin state for this destination, or an overriding admin state exerted from a higher… |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.4 | ColumnjuniL2tpDestStatusTotalTunnels | read-only | current | Number of tunnel creations attempted. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.5 | ColumnjuniL2tpDestStatusFailedTunnels | read-only | current | Number of tunnel creation attempts that failed to reach the established state. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.6 | ColumnjuniL2tpDestStatusFailedTunnelAuthens | read-only | current | Number of tunnel creation attempts that failed authentication. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.7 | ColumnjuniL2tpDestStatusActiveTunnels | read-only | current | Number of tunnels currently established. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.8 | ColumnjuniL2tpDestStatusTotalSessions | read-only | current | Number of session creations attempted. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.9 | ColumnjuniL2tpDestStatusFailedSessions | read-only | current | Number of session creation attempts that failed to reach the established state. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.10 | ColumnjuniL2tpDestStatusActiveSessions | read-only | current | Number of sessions currently established. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.11 | ColumnjuniL2tpDestStatusLockoutState | read-only | current | Lockout state of destination. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.12 | ColumnjuniL2tpDestStatusLockoutTimeRemaining | read-only | current | Lockout timeout remaining. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3 | NodejuniL2tpDestStatistics | |||
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1 | TablejuniL2tpDestStatTable | not-accessible | current | The L2TP destination statistics table. Describes the aggregate control and payload statistics for all L2TP tunnels configured on each destination. Each entry i… |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1 | RowjuniL2tpDestStatEntry | not-accessible | current | Describes the aggregate L2TP control and payload statistics for all L2TP tunnels on an L2TP destination. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.1 | ColumnjuniL2tpDestStatIfIndex | not-accessible | current | Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.2 | ColumnjuniL2tpDestStatCtlRecvOctets | read-only | current | Number of control octets received. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.3 | ColumnjuniL2tpDestStatCtlRecvPackets | read-only | current | Number of control packets received. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.4 | ColumnjuniL2tpDestStatCtlRecvErrors | read-only | current | Number of control packets incurring reception errors. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.5 | ColumnjuniL2tpDestStatCtlRecvDiscards | read-only | current | Number of control packets discarded after reception. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.6 | ColumnjuniL2tpDestStatCtlSendOctets | read-only | current | Number of control octets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.7 | ColumnjuniL2tpDestStatCtlSendPackets | read-only | current | Number of control packets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.8 | ColumnjuniL2tpDestStatCtlSendErrors | read-only | current | Number of control packets incurring transmission errors. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.9 | ColumnjuniL2tpDestStatCtlSendDiscards | read-only | current | Number of control packets discarded before transmission. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.10 | ColumnjuniL2tpDestStatPayRecvOctets | read-only | current | Number of payload octets received. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.11 | ColumnjuniL2tpDestStatPayRecvPackets | read-only | current | Number of payload packets received. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.12 | ColumnjuniL2tpDestStatPayRecvErrors | read-only | current | Number of payload packets incurring reception errors. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.13 | ColumnjuniL2tpDestStatPayRecvDiscards | read-only | current | Number of payload packets discarded after reception. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.14 | ColumnjuniL2tpDestStatPaySendOctets | read-only | current | Number of payload octets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.15 | ColumnjuniL2tpDestStatPaySendPackets | read-only | current | Number of payload packets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.16 | ColumnjuniL2tpDestStatPaySendErrors | read-only | current | Number of payload packets incurring transmission errors. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.17 | ColumnjuniL2tpDestStatPaySendDiscards | read-only | current | Number of payload packets discarded before transmission. |
| 1.3.6.1.4.1.4874.2.2.35.1.3 | NodejuniL2tpTunnel | |||
| 1.3.6.1.4.1.4874.2.2.35.1.3.1 | NodejuniL2tpTunnelConfig | |||
| 1.3.6.1.4.1.4874.2.2.35.1.3.1.2 | TablejuniL2tpTunnelConfigTable | not-accessible | current | The L2TP tunnel configuration table. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in juniL2tpTunnelStatsTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.1.2.1 | RowjuniL2tpTunnelConfigEntry | not-accessible | current | Describes the configuration attributes of an L2TP tunnel. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.1.2.1.1 | ColumnjuniL2tpTunnelConfigIfIndex | not-accessible | current | Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.1.2.1.2 | ColumnjuniL2tpTunnelConfigRowStatus | read-create | current | An implementation may choose not to support administrative configuration of tunnels. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.1.2.1.3 | ColumnjuniL2tpTunnelConfigAdminState | read-create | current | The configured administrative state. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2 | NodejuniL2tpTunnelStatus | |||
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1 | TablejuniL2tpTunnelStatusTable | not-accessible | current | The L2TP tunnel status and statistics table. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in juniL2tpTunnelConfigTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1 | RowjuniL2tpTunnelStatusEntry | not-accessible | current | An L2TP tunnel interface stats entry. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.1 | ColumnjuniL2tpTunnelStatusIfIndex | not-accessible | current | Same as the value of ifIndex for the corresponding entry in Interfaces MIB ifTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.2 | ColumnjuniL2tpTunnelStatusTransport | read-only | current | The underlying transport over which this L2TP tunnel is carried. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.3 | ColumnjuniL2tpTunnelStatusLocalTunnelId | read-only | current | The local tunnel identifier. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.4 | ColumnjuniL2tpTunnelStatusRemoteTunnelId | read-only | current | The remote tunnel identifier. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.5 | ColumnjuniL2tpTunnelStatusEffectiveAdminState | read-only | current | The administrative state currently in effect. This could be the configured admin state for this tunnel, or an overriding admin state exerted from a higher hier… |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.6 | ColumnjuniL2tpTunnelStatusState | read-only | current | The current state of the tunnel. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.7 | ColumnjuniL2tpTunnelStatusInitiated | read-only | current | Indicates whether the tunnel was initiated locally, or by the remote tunnel peer. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.8 | ColumnjuniL2tpTunnelStatusRemoteHostName | read-only | current | The host name obtained during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer. If the tunnel is idle, this object should maintain its v… |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.9 | ColumnjuniL2tpTunnelStatusRemoteVendorName | read-only | current | Identifies the vendor name of the peer's L2TP implementation. If the tunnel is idle, this object should maintain its value from the last time it was connected,… |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.10 | ColumnjuniL2tpTunnelStatusRemoteFirmwareRevision | read-only | current | The tunnel peer's firmware revision number. If the tunnel is idle, this object should maintain its value from the last time it was connected, or a zero value i… |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.11 | ColumnjuniL2tpTunnelStatusRemoteProtocolVersion | read-only | current | The protocol version and revision of the tunnel peer's implementation. The first octet contains the protocol version. The second octet contains the protocol re… |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.12 | ColumnjuniL2tpTunnelStatusRemoteBearerCapabilities | read-only | current | The Bearer Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected, or 'none' if not p… |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.13 | ColumnjuniL2tpTunnelStatusRemoteFramingCapabilities | read-only | current | The Framing Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected, or 'none' if not … |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.14 | ColumnjuniL2tpTunnelStatusRecvWindowSize | read-only | current | The receive window size. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.15 | ColumnjuniL2tpTunnelStatusSendWindowSize | read-only | current | The tunnel peer's receive window size. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.16 | ColumnjuniL2tpTunnelStatusSendQueueDepth | read-only | current | Number of control packets on transmit queue. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.17 | ColumnjuniL2tpTunnelStatusRecvSeq | read-only | current | The next sequence number expected in a received control packet. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.18 | ColumnjuniL2tpTunnelStatusRecvSeqAck | read-only | current | The last received sequence number that was acknowledged back to the tunnel peer. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.19 | ColumnjuniL2tpTunnelStatusSendSeq | read-only | current | The next sequence number to be sent in a transmitted control packet. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.20 | ColumnjuniL2tpTunnelStatusSendSeqAck | read-only | current | The send sequence number that the tunnel peer has acknowledged. The flow control state can be determined by subtracting the juniL2tpTunnelStatusSendSeq from ju… |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.21 | ColumnjuniL2tpTunnelStatusTotalSessions | read-only | current | The total number of sessions that this tunnel has successfully connected through to its tunnel peer since this tunnel was created, including those that have si… |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.22 | ColumnjuniL2tpTunnelStatusFailedSessions | read-only | current | The number of sessions that were initiated but failed to reach the established phase. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.23 | ColumnjuniL2tpTunnelStatusActiveSessions | read-only | current | The current number of sessions in the established state. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.24 | ColumnjuniL2tpTunnelStatusLastResultCode | read-only | current | The last value of the result code as described in the Result Code AVP which caused the tunnel to disconnect. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.25 | ColumnjuniL2tpTunnelStatusLastErrorCode | read-only | current | The last value of the error code as described in the Result Code AVP which caused the tunnel to disconnect. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.26 | ColumnjuniL2tpTunnelStatusLastErrorMessage | read-only | current | The last value of the optional message as described in the Result Code AVP which caused the tunnel to disconnect. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.27 | ColumnjuniL2tpTunnelStatusCumEstabTime | read-only | current | The cumulative time in seconds that this tunnel, since first being created, has spent in the established state (which may be punctuated by intervals outside th… |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.28 | ColumnjuniL2tpTunnelStatusEffectiveFailoverResync | read-only | current | The mechanism employed following failover to resynchronize with the L2TP peer. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3 | NodejuniL2tpTunnelStatistics | |||
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1 | TablejuniL2tpTunnelStatTable | not-accessible | current | The L2TP tunnel statistics table. Describes the control and payload statistics for each L2TP tunnel. Each entry in this table has a corresponding entry in the … |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1 | RowjuniL2tpTunnelStatEntry | not-accessible | current | Describes the L2TP control and payload statistics for an L2TP tunnel. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.1 | ColumnjuniL2tpTunnelStatIfIndex | not-accessible | current | Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.2 | ColumnjuniL2tpTunnelStatCtlRecvOctets | read-only | current | Number of control octets received. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.3 | ColumnjuniL2tpTunnelStatCtlRecvPackets | read-only | current | Number of control packets received. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.4 | ColumnjuniL2tpTunnelStatCtlRecvErrors | read-only | current | Number of control packets incurring reception errors. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.5 | ColumnjuniL2tpTunnelStatCtlRecvDiscards | read-only | current | Number of control packets discarded after reception. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.6 | ColumnjuniL2tpTunnelStatCtlSendOctets | read-only | current | Number of control octets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.7 | ColumnjuniL2tpTunnelStatCtlSendPackets | read-only | current | Number of control packets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.8 | ColumnjuniL2tpTunnelStatCtlSendErrors | read-only | current | Number of control packets incurring transmission errors. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.9 | ColumnjuniL2tpTunnelStatCtlSendDiscards | read-only | current | Number of control packets discarded before transmission. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.10 | ColumnjuniL2tpTunnelStatPayRecvOctets | read-only | current | Number of payload octets received. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.11 | ColumnjuniL2tpTunnelStatPayRecvPackets | read-only | current | Number of payload packets received. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.12 | ColumnjuniL2tpTunnelStatPayRecvErrors | read-only | current | Number of payload packets incurring reception errors. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.13 | ColumnjuniL2tpTunnelStatPayRecvDiscards | read-only | current | Number of payload packets discarded after reception. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.14 | ColumnjuniL2tpTunnelStatPaySendOctets | read-only | current | Number of payload octets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.15 | ColumnjuniL2tpTunnelStatPaySendPackets | read-only | current | Number of payload packets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.16 | ColumnjuniL2tpTunnelStatPaySendErrors | read-only | current | Number of payload packets incurring transmission errors. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.17 | ColumnjuniL2tpTunnelStatPaySendDiscards | read-only | current | Number of payload packets discarded before transmission. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.18 | ColumnjuniL2tpTunnelStatCtlRecvZLB | read-only | current | Number of Zero Length Body control packet acknowledgement packets that were received. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.19 | ColumnjuniL2tpTunnelStatCtlRecvOutOfSequence | read-only | current | Number of control packets not received in the correct sequence number order. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.20 | ColumnjuniL2tpTunnelStatCtlRecvOutOfWindow | read-only | current | Number of control packets received outside the offered receive window. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.21 | ColumnjuniL2tpTunnelStatCtlSendZLB | read-only | current | Number of Zero Length Body control packets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.22 | ColumnjuniL2tpTunnelStatCtlSendRetransmits | read-only | current | Number of control packet send retransmissions. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.4 | NodejuniL2tpTunnelMap | |||
| 1.3.6.1.4.1.4874.2.2.35.1.3.4.1 | TablejuniL2tpMapTifSidToSifTable | not-accessible | current | Table of TunnelIf/SessionId -> SessionIf mappings. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.4.1.1 | RowjuniL2tpMapTifSidToSifEntry | not-accessible | current | A mapping of TunnelIf/SessionId to SessionIf. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.4.1.1.1 | ColumnjuniL2tpMapTifSidToSifTunnelIfIndex | not-accessible | current | The ifIndex of a tunnel interface. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.4.1.1.2 | ColumnjuniL2tpMapTifSidToSifLocalSessionId | not-accessible | current | A local session ID on the associated tunnel interface. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.4.1.1.3 | ColumnjuniL2tpMapTifSidToSifSessionIfIndex | read-only | current | The ifIndex of the session interface identified by this entry's Tunnel ifIndex and local Session ID pair. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.4.2 | TablejuniL2tpMapTidToTifTable | not-accessible | current | Map L2TP tunnel IDs to tunnel interfaces. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.4.2.1 | RowjuniL2tpMapTidToTifEntry | not-accessible | current | A mapping of L2TP tunnel ID to tunnel interface. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.4.2.1.1 | ColumnjuniL2tpMapTidToTifLocalTunnelId | not-accessible | current | A local tunnel identifier. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.4.2.1.2 | ColumnjuniL2tpMapTidToTifIfIndex | read-only | current | The ifIndex of the tunnel interface having the associated tunnel identifier. |
| 1.3.6.1.4.1.4874.2.2.35.1.4 | NodejuniL2tpSession | |||
| 1.3.6.1.4.1.4874.2.2.35.1.4.1 | NodejuniL2tpSessionConfig | |||
| 1.3.6.1.4.1.4874.2.2.35.1.4.1.2 | TablejuniL2tpSessionConfigTable | not-accessible | current | The L2TP session configuration table. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in juniL2tpSessionStatsTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.1.2.1 | RowjuniL2tpSessionConfigEntry | not-accessible | current | Describes the configuration attributes of an L2TP session. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.1.2.1.1 | ColumnjuniL2tpSessionConfigIfIndex | not-accessible | current | Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.1.2.1.2 | ColumnjuniL2tpSessionConfigRowStatus | read-create | current | An implementation may choose not to support administrative configuration of tunnels. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.1.2.1.3 | ColumnjuniL2tpSessionConfigAdminState | read-create | current | The configured administrative state. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2 | NodejuniL2tpSessionStatus | |||
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1 | TablejuniL2tpSessionStatusTable | not-accessible | current | The L2TP session status and statistics table. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1 | RowjuniL2tpSessionStatusEntry | not-accessible | current | An L2TP session interface status and statistics entry. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.1 | ColumnjuniL2tpSessionStatusIfIndex | not-accessible | current | The ifIndex of an L2TP session interface. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.2 | ColumnjuniL2tpSessionStatusLacPppIfIndex | read-only | deprecated | For pass-through PPP sessions (conventional LAC), the ifIndex of an associated local PPP interface through which the remote LAC client was connected. If unknow… |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.3 | ColumnjuniL2tpSessionStatusLocalSessionId | read-only | current | The local session ID for the session. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.4 | ColumnjuniL2tpSessionStatusRemoteSessionId | read-only | current | The remote session ID for the session. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.5 | ColumnjuniL2tpSessionStatusUserName | read-only | current | The peer session name on this interface, typically the login name of the remote user. If the user name is unknown this object will contain a zero-length string. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.6 | ColumnjuniL2tpSessionStatusEffectiveAdminState | read-only | current | The administrative state currently in effect. This could be the configured admin state for this session, or an overriding admin state exerted from a higher hie… |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.7 | ColumnjuniL2tpSessionStatusState | read-only | current | The current state of the session. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.8 | ColumnjuniL2tpSessionStatusCallType | read-only | current | The type of call and role this tunnel peer is providing for this session. For example, lacIncoming(1) indicates this tunnel peer is acting as a LAC and generat… |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.9 | ColumnjuniL2tpSessionStatusCallSerialNumber | read-only | current | The serial number assigned to this session. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.10 | ColumnjuniL2tpSessionStatusTxConnectSpeed | read-only | current | The last known transmit baud rate for this session. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.11 | ColumnjuniL2tpSessionStatusRxConnectSpeed | read-only | current | The last known receive baud rate for this session. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.12 | ColumnjuniL2tpSessionStatusCallBearerType | read-only | current | The bearer type of this session. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.13 | ColumnjuniL2tpSessionStatusFramingType | read-only | current | The framing type of this session. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.14 | ColumnjuniL2tpSessionStatusPhysChanId | read-only | current | The physical channel identifier for the session. For pass-through PPP sessions, typically the ifIndex of the access interface lying below the PPP interface ide… |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.15 | ColumnjuniL2tpSessionStatusDnis | read-only | current | The Dialed Number Information String that the LAC obtained from the network for the session. If no DNIS was provided, a zero-length string will be returned. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.16 | ColumnjuniL2tpSessionStatusClid | read-only | current | The Calling Line ID that the LAC obtained from the network for the session. If no CLID was provided, a zero-length string will be returned. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.17 | ColumnjuniL2tpSessionStatusSubAddress | read-only | current | The SubAddress that the LAC obtained from the network for the session. If no SubAddress was provided, a zero-length string will be returned. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.18 | ColumnjuniL2tpSessionStatusPrivateGroupId | read-only | current | The Private Group Identifier used for this tunneled session. If no Private Group Identifier was provided, a zero-length string will be returned. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.19 | ColumnjuniL2tpSessionStatusProxyLcp | read-only | current | Indicates whether proxy LCP was provided for this session. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.20 | ColumnjuniL2tpSessionStatusAuthMethod | read-only | current | The proxy authentication method employed by the LAC for the session. If juniL2tpSessionProxyLcp is false(2) this object reports a value of 'none' and should be… |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.21 | ColumnjuniL2tpSessionStatusSequencingState | read-only | current | Indicates which tunnel peers have requested payload sequencing. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.22 | ColumnjuniL2tpSessionStatusSendSeq | read-only | current | The next send sequence number. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.23 | ColumnjuniL2tpSessionStatusRecvSeq | read-only | current | The next receive sequence number expected. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.24 | ColumnjuniL2tpSessionStatusLacTunneledIfIndex | read-only | current | For pass-through remote client sessions (conventional LAC), the ifIndex of an associated local interface through which the remote LAC client was connected. If … |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.25 | ColumnjuniL2tpSessionStatusCumEstabTime | read-only | current | The cumulative time in seconds that this session, since first being created, has spent in the established state (which may be punctuated by intervals outside t… |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3 | NodejuniL2tpSessionStatistics | |||
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1 | TablejuniL2tpSessionStatTable | not-accessible | current | The L2TP session statistics table. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1 | RowjuniL2tpSessionStatEntry | not-accessible | current | An L2TP session interface statistics entry. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.1 | ColumnjuniL2tpSessionStatIfIndex | not-accessible | current | The ifIndex of an L2TP session interface. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.2 | ColumnjuniL2tpSessionStatPayRecvOctets | read-only | current | Number of payload octets received. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.3 | ColumnjuniL2tpSessionStatPayRecvPackets | read-only | current | Number of payload packets received. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.4 | ColumnjuniL2tpSessionStatPayRecvErrors | read-only | current | Number of payload packets incurring reception errors. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.5 | ColumnjuniL2tpSessionStatPayRecvDiscards | read-only | current | Number of payload packets discarded after reception. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.6 | ColumnjuniL2tpSessionStatPaySendOctets | read-only | current | Number of payload octets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.7 | ColumnjuniL2tpSessionStatPaySendPackets | read-only | current | Number of payload packets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.8 | ColumnjuniL2tpSessionStatPaySendErrors | read-only | current | Number of payload packets incurring transmission errors. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.9 | ColumnjuniL2tpSessionStatPaySendDiscards | read-only | current | Number of payload packets discarded before transmission. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.10 | ColumnjuniL2tpSessionStatRecvOutOfSequence | read-only | current | The number of packets received out of sequence. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.11 | ColumnjuniL2tpSessionStatResequencingTimeouts | read-only | current | The number of reassembly timeouts that have occurred. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.12 | ColumnjuniL2tpSessionStatPayLostPackets | read-only | current | When sequence numbers are enabled, this value represents the estimated number of payload packets lost, based on observed gaps in sequence numbers. This estimat… |
| 1.3.6.1.4.1.4874.2.2.35.1.5 | NodejuniL2tpTransport | |||
| 1.3.6.1.4.1.4874.2.2.35.1.5.1 | NodejuniL2tpTransportUdpIp | |||
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.1 | NodejuniL2tpUdpIpSystem | |||
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.2 | NodejuniL2tpUdpIpDestination | |||
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1 | TablejuniL2tpUdpIpDestTable | not-accessible | current | The L2TP UDP/IP destination table. Reports the UDP/IP characteristics of a L2TP UDP/IP destination. A L2TP UDP/IP destination is associated with a local router… |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1 | RowjuniL2tpUdpIpDestEntry | not-accessible | current | Describes the UDP/IP attributes of an L2TP destination. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1.1 | ColumnjuniL2tpUdpIpDestIfIndex | not-accessible | current | Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1.2 | ColumnjuniL2tpUdpIpDestRouterIndex | read-only | current | The index of an entry in the juniRouterTable for the local router with which this L2TP destination interface is associated. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1.3 | ColumnjuniL2tpUdpIpDestLocalAddress | read-only | current | This L2TP destination's local IP address. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1.4 | ColumnjuniL2tpUdpIpDestRemoteAddress | read-only | current | The IP address of the remote L2TP endpoint. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.3 | NodejuniL2tpUdpIpTunnel | |||
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1 | TablejuniL2tpUdpIpTunnelTable | not-accessible | current | The L2TP UDP/IP tunnel table. Reports the UDP/IP characteristics of L2TP UDP/IP tunnels. A L2TP UDP/IP tunnel is defined in terms of the local and remote IP ad… |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1 | RowjuniL2tpUdpIpTunnelEntry | not-accessible | current | An L2TP UDP/IP tunnel entry. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.1 | ColumnjuniL2tpUdpIpTunnelIfIndex | not-accessible | current | Same as the value of ifIndex for the corresponding entry in Interfaces MIB ifTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.2 | ColumnjuniL2tpUdpIpTunnelRouterIndex | read-only | current | The index of an entry in the juniRouterTable for the local router with which this L2TP tunnel interface is associated. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.3 | ColumnjuniL2tpUdpIpTunnelLocalAddress | read-only | current | The local IP address for this UDP/IP tunnel. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.4 | ColumnjuniL2tpUdpIpTunnelLocalPort | read-only | current | The local UDP port for this UDP/IP tunnel. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.5 | ColumnjuniL2tpUdpIpTunnelRemoteAddress | read-only | current | The remote IP address for this UDP/IP tunnel. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.6 | ColumnjuniL2tpUdpIpTunnelRemotePort | read-only | current | The remote UDP port for this UDP/IP tunnel. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.7 | ColumnjuniL2tpUdpIpTunnelRemoteReceiveAddress | read-only | current | The remote receive IP address for this UDP/IP tunnel. This object will differ from juniL2tpUdpIpTunnelRemoteAddress when the tunnel uses separate transmit and … |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.8 | ColumnjuniL2tpUdpIpTunnelRemoteReceivePort | read-only | current | The remote receive UDP port for this UDP/IP tunnel. This object will differ from juniL2tpUdpIpTunnelRemotePort when the tunnel uses separate transmit and recei… |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.4 | NodejuniL2tpUdpIpSession | |||
| 1.3.6.1.4.1.4874.2.2.35.2 | NodejuniL2tpTrapControl | |||
| 1.3.6.1.4.1.4874.2.2.35.3 | NodejuniL2tpConformance | |||
| 1.3.6.1.4.1.4874.2.2.35.3.1 | NodejuniL2tpGroups | |||
| 1.3.6.1.4.1.4874.2.2.35.3.1.1 | GroupjuniL2tpConfigGroup | obsolete | Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. This group became obsolete when juniL2tpSysConfi… | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.2 | GroupjuniL2tpStatusGroup | obsolete | Obsolete collection of objects providing status of the L2TP protocol at the system, destination, tunnel, and session levels. This group became obsolete when ne… | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.3 | GroupjuniL2tpStatGroup | obsolete | Obsolete collection of objects providing statistics of the L2TP protocol at the destination, tunnel, and session levels. This group became obsolete when new ob… | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.4 | GroupjuniL2tpMapGroup | current | A collection of objects providing mapping associations among L2TP components. | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.5 | GroupjuniL2tpUdpIpGroup | obsolete | Obsolete collection of objects providing UDP/IP transport information for L2TP components. | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.6 | GroupjuniL2tpStatusGroup2 | obsolete | Obsolete collection of objects providing status of the L2TP protocol at the system, destination, tunnel, and session levels. | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.7 | GroupjuniL2tpStatGroup2 | current | A collection of objects providing statistics of the L2TP protocol at the destination, tunnel, and session levels. | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.8 | GroupjuniL2tpConfigGroup2 | obsolete | Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. This group became obsolete when new objects were… | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.9 | GroupjuniL2tpConfigGroup3 | obsolete | Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. This group became obsolete when juniL2tpSysConfi… | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.10 | GroupjuniL2tpConfigGroup4 | obsolete | Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. This group became obsolete when new objects were… | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.11 | GroupjuniL2tpConfigGroup5 | obsolete | Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. This group became obsolete when new objects were… | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.12 | GroupjuniL2tpConfigGroup6 | obsolete | Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. This group became obsolete when new objects were… | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.13 | GroupjuniL2tpConfigGroup7 | obsolete | A collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.14 | GroupjuniL2tpUdpIpGroup1 | current | A collection of objects providing UDP/IP transport information for L2TP components. | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.15 | GroupjuniL2tpConfigGroup8 | obsolete | Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.16 | GroupjuniL2tpConfigGroup9 | obsolete | Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.17 | GroupjuniL2tpConfigGroup10 | obsolete | Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.18 | GroupjuniL2tpStatusGroup3 | obsolete | Obsolete collection of objects providing status information of the L2TP protocol, tunnels and sessions. | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.19 | GroupjuniL2tpConfigGroup11 | obsolete | Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.20 | GroupjuniL2tpConfigGroup12 | obsolete | Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.21 | GroupjuniL2tpStatusGroup4 | obsolete | Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.22 | GroupjuniL2tpConfigGroup13 | current | A collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.23 | GroupjuniL2tpStatusGroup5 | current | A collection of objects providing status of the L2TP protocol at the system, destination, tunnel, and session levels. | |
| 1.3.6.1.4.1.4874.2.2.35.3.2 | NodejuniL2tpCompliances | |||
| 1.3.6.1.4.1.4874.2.2.35.3.2.1 | CompliancejuniL2tpCompliance | obsolete | Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when juniL2tpTunnelStatusCumEstabTime, juniL2tpS… | |
| 1.3.6.1.4.1.4874.2.2.35.3.2.2 | CompliancejuniL2tpCompliance2 | obsolete | Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when a new object was added to the configuration… | |
| 1.3.6.1.4.1.4874.2.2.35.3.2.3 | CompliancejuniL2tpCompliance3 | obsolete | Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration… | |
| 1.3.6.1.4.1.4874.2.2.35.3.2.4 | CompliancejuniL2tpCompliance4 | obsolete | Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration… | |
| 1.3.6.1.4.1.4874.2.2.35.3.2.5 | CompliancejuniL2tpCompliance5 | obsolete | Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration… | |
| 1.3.6.1.4.1.4874.2.2.35.3.2.6 | CompliancejuniL2tpCompliance6 | obsolete | Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration… | |
| 1.3.6.1.4.1.4874.2.2.35.3.2.7 | CompliancejuniL2tpCompliance7 | obsolete | Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration… | |
| 1.3.6.1.4.1.4874.2.2.35.3.2.8 | CompliancejuniL2tpCompliance8 | obsolete | Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration… | |
| 1.3.6.1.4.1.4874.2.2.35.3.2.9 | CompliancejuniL2tpCompliance9 | obsolete | Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration… | |
| 1.3.6.1.4.1.4874.2.2.35.3.2.10 | CompliancejuniL2tpCompliance10 | obsolete | Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the configuration… | |
| 1.3.6.1.4.1.4874.2.2.35.3.2.11 | CompliancejuniL2tpCompliance11 | obsolete | Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the status group. | |
| 1.3.6.1.4.1.4874.2.2.35.3.2.12 | CompliancejuniL2tpCompliance12 | obsolete | Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the config and st… | |
| 1.3.6.1.4.1.4874.2.2.35.3.2.13 | CompliancejuniL2tpCompliance13 | current | Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when new objects were added to the config and st… | |
| 1.3.6.1.4.1.4874.2.2.35.3.2.14 | CompliancejuniL2tpCompliance14 | current | The compliance statement for SNMPv2 entities which implement the L2TP MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| JuniL2tpAdminState | INTEGER { enabled(0), disabled(1), drain(2) } | current | The administrative state exerted on L2TP tunnels sessions at some scope of control. enabled New tunnels/sessions may be instantiated. disabled All tunnels/sessions are terminated. drain No new tunnels/sessions may be in… |
| JuniL2tpLockoutAction | INTEGER { none(0), test(1), unlock(2) } | current | The lockout action applied to an L2TP destinations. none No action test Test and unlock if successful unlock Unconditional unlock |
| JuniL2tpLockoutState | INTEGER { notLocked(0), waitLockTimeout(1), waitTestStart(2), testing(3) } | current | The lockout state of an L2TP destination. notLocked not locked waitLockTimeout waiting for lockout timeout expiration waitTestStart waiting for lockout test start testing lockout test active |
| JuniL2tpSessionId | Integer32 (0..65535) | current | An L2TP Session ID. Implementation constraints may restrict the range of values actually used. |
| JuniL2tpTransport | INTEGER { other(0), udpIp(1) } | current | Transport type over which L2TP is carried. |
| JuniL2tpTunnelId | Integer32 (0..65535) | current | An L2TP Tunnel ID. Implementation constraints may restrict the range of values actually used. |