Juniper-LOG-MIB
59 objects
The Logging Facility MIB for the Juniper Networks enterprise.
Imported Objects
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniLogSeverity |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.28 | IdentityjuniLogMIB | The Logging Facility MIB for the Juniper Networks enterprise. | ||
| 1.3.6.1.4.1.4874.2.2.28.0 | NodejuniLogTrapPrefix | |||
| 1.3.6.1.4.1.4874.2.2.28.0.1 | NotificationjuniLogMsgThresholdTrap | current | This trap is generated to report that an incremental number of log messages (described by the value of juniLogMsgThreshold) have been added to juniLogMsgTable. | |
| 1.3.6.1.4.1.4874.2.2.28.1 | NodejuniLogObjects | |||
| 1.3.6.1.4.1.4874.2.2.28.1.1 | NodejuniLogDestinations | |||
| 1.3.6.1.4.1.4874.2.2.28.1.1.1 | NodejuniLogDestSyslog | |||
| 1.3.6.1.4.1.4874.2.2.28.1.1.1.1 | ScalarjuniLogDestSyslogSeverity | read-write | obsolete | The minimum severity level of messages sent to the SYSLOG server. A value of 'off' indicates no log messages are sent to this destination. |
| 1.3.6.1.4.1.4874.2.2.28.1.1.1.2 | ScalarjuniLogDestSyslogAddress | read-write | obsolete | The IP address of the SYSLOG server to which log messages are to be sent. A value of 0.0.0.0 indicates no server address is configured. |
| 1.3.6.1.4.1.4874.2.2.28.1.1.1.3 | TablejuniLogSyslogTable | not-accessible | current | A table describing the characteristics of each syslog destination. |
| 1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1 | RowjuniLogSyslogEntry | not-accessible | current | An entry describingthe characteristics of a syslog destination. |
| 1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.1 | ColumnjuniLogSyslogIpAddress | not-accessible | current | The IP address of this syslog destination. This value must be a unicast IP address. |
| 1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.2 | ColumnjuniLogSyslogRowStatus | read-create | current | Controls creation/deletion of entries in this table. Only 'createAndGo' and 'destroy' are supported. |
| 1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.3 | ColumnjuniLogSyslogSeverity | read-create | current | The severity level for this syslog destination. Setting this value to 'off' suppresses log messages from being sent to this syslog destination. |
| 1.3.6.1.4.1.4874.2.2.28.1.1.1.3.1.4 | ColumnjuniLogSyslogFacility | read-create | current | The facility id attached to messages sent to this syslog destination. |
| 1.3.6.1.4.1.4874.2.2.28.1.1.2 | NodejuniLogDestConsole | |||
| 1.3.6.1.4.1.4874.2.2.28.1.1.2.1 | ScalarjuniLogDestConsoleSeverity | read-write | current | The minimum severity level of messages sent to the console. A value of 'off' indicates no log messages are sent to this destination. |
| 1.3.6.1.4.1.4874.2.2.28.1.1.3 | NodejuniLogDestNvFile | |||
| 1.3.6.1.4.1.4874.2.2.28.1.1.3.1 | ScalarjuniLogDestNvFileSeverity | read-write | current | The minimum severity level of messages sent to the nonvolatile log file. A value of 'off' indicates no log messages are to be sent to this destination. |
| 1.3.6.1.4.1.4874.2.2.28.1.2 | NodejuniLogCategories | |||
| 1.3.6.1.4.1.4874.2.2.28.1.2.1 | NodejuniLogCatScalars | |||
| 1.3.6.1.4.1.4874.2.2.28.1.2.2 | TablejuniLogCatTable | not-accessible | current | A table describing the characteristics of each log category. |
| 1.3.6.1.4.1.4874.2.2.28.1.2.2.1 | RowjuniLogCatEntry | not-accessible | current | An entry describing the characteristics of a log category. |
| 1.3.6.1.4.1.4874.2.2.28.1.2.2.1.1 | ColumnjuniLogCatIndex | not-accessible | current | An integer index uniquely associated with a log. Index values do not necessarily persist across system reboots. Following reboot, mappings of (reboot-invariant… |
| 1.3.6.1.4.1.4874.2.2.28.1.2.2.1.2 | ColumnjuniLogCatName | read-only | current | The name of this log category. |
| 1.3.6.1.4.1.4874.2.2.28.1.2.2.1.3 | ColumnjuniLogCatDescr | read-only | current | A description of the functionality for which events are recorded by this log category. |
| 1.3.6.1.4.1.4874.2.2.28.1.2.2.1.4 | ColumnjuniLogCatEngineering | read-only | current | An indication of whether this log is intended mainly for engineering development and debug purposes. |
| 1.3.6.1.4.1.4874.2.2.28.1.2.2.1.5 | ColumnjuniLogCatDiscards | read-only | current | The number of messages generated by this log category that were discarded because of resource limitations. |
| 1.3.6.1.4.1.4874.2.2.28.1.2.2.1.6 | ColumnjuniLogCatSeverity | read-write | current | The severity level for this log category. The value 'off' disables recording of this log category's messages. For other severity level values, only messages at… |
| 1.3.6.1.4.1.4874.2.2.28.1.2.2.1.7 | ColumnjuniLogCatVerbosity | read-write | current | The verbosity level for this log category. Supplementary information may be available for certain event types. This object controls whether that additional inf… |
| 1.3.6.1.4.1.4874.2.2.28.1.2.3 | TablejuniLogCatNameTable | not-accessible | current | A table mapping each log category's name to its index. |
| 1.3.6.1.4.1.4874.2.2.28.1.2.3.1 | RowjuniLogCatNameEntry | not-accessible | current | An entry mapping a log category's name to its index. |
| 1.3.6.1.4.1.4874.2.2.28.1.2.3.1.1 | ColumnjuniLogCatNameName | read-only | current | The name of the log category. |
| 1.3.6.1.4.1.4874.2.2.28.1.2.3.1.2 | ColumnjuniLogCatNameIndex | read-only | current | The log index associated with this log category. |
| 1.3.6.1.4.1.4874.2.2.28.1.3 | NodejuniLogMessages | |||
| 1.3.6.1.4.1.4874.2.2.28.1.3.1 | NodejuniLogMsgScalars | |||
| 1.3.6.1.4.1.4874.2.2.28.1.3.1.1 | ScalarjuniLogMsgCapacity | read-only | current | The maximum capacity, in number of log messages, of the juniLogMsgTable. |
| 1.3.6.1.4.1.4874.2.2.28.1.3.1.2 | ScalarjuniLogMsgLastSeqNumber | read-only | current | The sequence number of the most recent juniLogMsgTable entry. By monitoring this object's rate of change in relation to the juniLogMsgTable capacity, a managem… |
| 1.3.6.1.4.1.4874.2.2.28.1.3.2 | TablejuniLogMsgTable | not-accessible | current | A table of log messages generated by this device. |
| 1.3.6.1.4.1.4874.2.2.28.1.3.2.1 | RowjuniLogMsgEntry | not-accessible | current | A log message generated by this device. |
| 1.3.6.1.4.1.4874.2.2.28.1.3.2.1.1 | ColumnjuniLogMsgSysUpTimeStamp | not-accessible | current | The value of sysUpTime when this log message was recorded. |
| 1.3.6.1.4.1.4874.2.2.28.1.3.2.1.2 | ColumnjuniLogMsgSequenceNumber | not-accessible | current | A sequence number that uniquely identifies this entry. Sequence numbers are assigned consecutively beginning with 1. More recent entries have higher sequence n… |
| 1.3.6.1.4.1.4874.2.2.28.1.3.2.1.3 | ColumnjuniLogMsgCatName | read-only | current | Name of the log category that contributed this message. |
| 1.3.6.1.4.1.4874.2.2.28.1.3.2.1.4 | ColumnjuniLogMsgCatIndex | read-only | current | Index of the log category that contributed this message. |
| 1.3.6.1.4.1.4874.2.2.28.1.3.2.1.5 | ColumnjuniLogMsgSeverity | read-only | current | The severity of the message. |
| 1.3.6.1.4.1.4874.2.2.28.1.3.2.1.6 | ColumnjuniLogMsgText | read-only | current | The text of the log message. Truncation of log message text is indicated by n asterisk character ('*') in the last octet of a maximum-size string. |
| 1.3.6.1.4.1.4874.2.2.28.1.3.2.1.7 | ColumnjuniLogMsgDateAndTimeStamp | read-only | current | The date and time this message was generated. |
| 1.3.6.1.4.1.4874.2.2.28.2 | NodejuniLogTrapControl | |||
| 1.3.6.1.4.1.4874.2.2.28.2.1 | ScalarjuniLogMsgThreshold | read-write | current | Number of log messages which, when added to juniLogMsgTable, cause a juniLogMsgThresholdTrap to be generated. This value is expressed as a percentage of the ca… |
| 1.3.6.1.4.1.4874.2.2.28.4 | NodejuniLogMIBConformance | |||
| 1.3.6.1.4.1.4874.2.2.28.4.1 | NodejuniLogMIBCompliances | |||
| 1.3.6.1.4.1.4874.2.2.28.4.1.1 | CompliancejuniLogCompliance | obsolete | Obsolete compliance statement for entities which implement the Juniper Networks Log MIB. This statement became obsolete when support for multiple SYSLOGs was a… | |
| 1.3.6.1.4.1.4874.2.2.28.4.1.2 | CompliancejuniLogCompliance2 | current | The compliance statement for entities which implement the Juniper Networks Log MIB, including support for multiple SYSLOG destinations. | |
| 1.3.6.1.4.1.4874.2.2.28.4.2 | NodejuniLogMIBGroups | |||
| 1.3.6.1.4.1.4874.2.2.28.4.2.1 | GroupjuniLogGroup | obsolete | Obsolete collection of objects providing management of Juniper Networks logging capabilities. This group became obsolete when support for multiple SYSLOGs was … | |
| 1.3.6.1.4.1.4874.2.2.28.4.2.2 | GroupjuniLogGroup2 | current | A collection of objects providing management of Juniper Networks logging capabilities, including support for multiple SYSLOG destinations. | |
| 1.3.6.1.4.1.4874.2.2.28.4.2.3 | GroupjuniLogTrapGroup | current | A management notification pertaining to logging operations. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| JuniLogCatName | OCTET STRING (SIZE (1..32)) | current | The name of a log category. Represents textual information taken from the NVT ASCII character set. |
| JuniLogSyslogFacility | INTEGER { local0(0), local1(1), local2(2), local3(3), local4(4), local5(5), local6(6), local7(7) } | current | The syslog daemon facility id. |
| JuniLogVerbosity | INTEGER { low(0), medium(1), high(2) } | current | The log verbosity level. Not all event types offer medium- or high-verbosity levels of detail. |