MIB Viewer

Juniper-PPP-PROFILE-MIB

69 objects
The Point-to-Point Protocol (PPP) Profile MIB for the Juniper Netowrks enterprise. This MIB provides configuration parameters that extend the tables found in the Juniper-PROFILE-MIB to support profiles for PPP interfaces.
OIDNameAccessStatusDescription
1.3.6.1.4.1.4874.2.2.45IdentityjuniPppProfileMIBThe Point-to-Point Protocol (PPP) Profile MIB for the Juniper Netowrks enterprise. This MIB provides configuration parameters that extend the tables found in t…
1.3.6.1.4.1.4874.2.2.45.1NodejuniPppProfileObjects
1.3.6.1.4.1.4874.2.2.45.1.1NodejuniPppProfile
1.3.6.1.4.1.4874.2.2.45.1.1.1TablejuniPppProfileTablenot-accessiblecurrentThis table contains profiles for configuring PPP interfaces. Entries in this table are created/deleted as a side-effect of corresponding operations to the juni…
1.3.6.1.4.1.4874.2.2.45.1.1.1.1RowjuniPppProfileEntrynot-accessiblecurrentA profile describing configuration of a PPP interface.
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.1ColumnjuniPppProfileIdnot-accessiblecurrentThe integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the Juniper-PROFILE-MI…
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.2ColumnjuniPppProfileSetMapread-writecurrentA bitmap representing which objects in this entry have been explicitly configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for details of use. …
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.3ColumnjuniPppProfileLcpMagicNumberread-writecurrentIf true(2) then the local node will attempt to perform Magic Number negotiation with the remote node. If false(1) then this negotiation is not performed. In an…
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.4ColumnjuniPppProfileLcpKeepaliveread-writecurrentKeepalive interval in seconds. A value of zero disables keepalive. Keepalive is performed using LCP Echo.
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.5ColumnjuniPppProfileLcpAuthenticationread-writedeprecatedSpecifies the type(s) of authentication, if any, to be negotiated with the peer: none No authentication is negotiated. pap PAP negotiation only. chap CHAP nego…
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.6ColumnjuniPppProfileIpPeerDnsPriorityread-writecurrentWhen enabled, allows peer's DNS address to prevail in the event of a negotiation conflict; when disabled, the local PPP interface's DNS address prevails.
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.7ColumnjuniPppProfileIpPeerWinsPriorityread-writecurrentWhen enabled, allows peer's WINS address to prevail in the event of a negotiation conflict; when disabled, the local PPP interface's WINS address prevails.
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.8ColumnjuniPppProfileLcpInitialMRUread-writecurrentThe initial Maximum Receive Unit (MRU) that the local PPP entity will advertise to the remote entity. If the value of this variable is 1 then the local PPP ent…
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.9ColumnjuniPppProfilePacketLogread-writecurrentWhen enabled, allows packet logging on dynamic PPP interfaces.
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.10ColumnjuniPppProfileStateLogread-writecurrentWhen enabled, allows state machine logging on dynamic PPP interfaces.
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.11ColumnjuniPppProfileChapMinChallengeLengthread-writecurrentMinimum value of the CHAP authenticator challenge length value. This value is never allowed to be set to a value greater than juniPppProfileChapMaxChallengeLen…
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.12ColumnjuniPppProfileChapMaxChallengeLengthread-writecurrentMaximum value of the CHAP authenticator challenge length value. This value is never allowed to be set to a value less than juniPppLinkConfigChapMinChallengeLen…
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.13ColumnjuniPppProfilePassiveModeread-writecurrentWhen enabled, LCP state machine is forced into passive mode on lower layer UP message. It adds compatibility with slow and buggy clients.
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.14ColumnjuniPppProfileMlpppread-writecurrentEnables the creation of dynamic multi-link PPP interfaces.
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.15ColumnjuniPppProfileIpcpNetmaskread-writecurrentEnables the negotiation of the IPCP option netmask (0x90) during IPCP negotiation.
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.16ColumnjuniPppProfileAuthenticatorVirtualRouterread-writecurrentThe name of the virtual router (Juniper-ROUTER-MIB.juniRouterName) to be used for authentication on the PPP interface. Setting this object statically binds the…
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.17ColumnjuniPppProfileAaaProfileread-writecurrentThe name of the AAA profile to be used for authentication on the PPP interface. Setting this object statically binds the aaa profile with the PPP interface. If…
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.18ColumnjuniPppProfileInitiateIpread-writecurrentIf enabled, PPP interface will initiate negotiation of IPCP; if disabled, PPP interface will rely on remote PPP client to initiate negotiation of IPCP.
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.19ColumnjuniPppProfileInitiateIpv6read-writecurrentIf enabled, PPP interface will initiate negotiation of IPv6CP; if disabled, PPP interface will rely on remote PPP client to initiate negotiation of IPv6CP.
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.20ColumnjuniPppProfileFragmentationread-writecurrentEnables MLPPP fragmentation.
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.21ColumnjuniPppProfileReassemblyread-writecurrentEnables MLPPP reassembly.
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.22ColumnjuniPppProfileMaxReceiveReconstructedUnitread-writecurrentThe Maximum Received Reconstructed Unit (MRRU) that the local PPP entity will advertise to the remote entity. If the value of this variable is 1, then the MRRU…
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.23ColumnjuniPppProfileFragmentSizeread-writecurrentThe size of fragments transmitted by the local PPP entity. If the value of this variable is 1, then the fragment size is set to the link's MTU value.
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.24ColumnjuniPppProfileHashLinkSelectionread-writecurrentEnables MLPPP hash-based link selection for non-best-effort data.
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.25ColumnjuniPppProfileLcpAuthentication2read-writecurrentA configuration variable comprised of nibbles i.e. 4 bits, such that a client can supply a list of 0 to 8 selections. The least significant nibble is the first…
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.26ColumnjuniPppProfileIgnoreMagicNumberMismatchread-writecurrentThe ignore magic number mismatch option of the PPP interface determines the action to be taken, when the peer has not negotiated any value yet sent null or inv…
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.27ColumnjuniPppProfileIpcpPromptDnsOptionread-writecurrentControl prompting of IPCP options to remote peer.
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.28ColumnjuniPppProfileIpcpLockoutread-writecurrentThe lockout option for IPCP determines whether IPCP can be negotiated when the interface is already running IPV6CP. On enabling this option, the negotiation wi…
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.29ColumnjuniPppProfileMultilinkMulticlassread-createcurrentEnables Multiclass Multilink PPP (MCML). Changing this object has an effect when the link is next restarted.
1.3.6.1.4.1.4874.2.2.45.1.1.1.1.30ColumnjuniPppProfileMultilinkMaxMultiClassesread-createcurrentMaximum number of MCML classes to be negotiated. Changing this object has an effect when the link is next restarted.
1.3.6.1.4.1.4874.2.2.45.1.1.2TablejuniPppProfileMulticlassTraffiClassTablenot-accessiblecurrentThis table contains entries for MLPPP Multiclass to traffic class mapping of the profile present in the system.
1.3.6.1.4.1.4874.2.2.45.1.1.2.1RowjuniPppProfileMulticlassTrafficClassEntrynot-accessiblecurrentEach entry describes the MLPPP multiclass to traffic class mapping of profiles.Other characteristics like fragmentation and reassembly for a particular traffic…
1.3.6.1.4.1.4874.2.2.45.1.1.2.1.1ColumnjuniPppProfileMulticlassIdnot-accessiblecurrentThe index of the profile. When creating entries in this table, suitable values for this object are determined by reading juniPppProfileId.
1.3.6.1.4.1.4874.2.2.45.1.1.2.1.2ColumnjuniPppProfileMulticlassIndexnot-accessiblecurrentThe multiclass index of a particular traffic class type. This can be configured only when MCMP is enabled in the profile.
1.3.6.1.4.1.4874.2.2.45.1.1.2.1.3ColumnjuniPppProfileMulticlassTcNameread-writecurrentThe traffic class index mapped to the MCMP multiclass index. This can be configured only when MCMP is enabled in the profile.
1.3.6.1.4.1.4874.2.2.45.1.1.2.1.4ColumnjuniPppProfileMulticlassFragmentationread-writecurrentEnable or disable fragmentation for a particular multiclass. This can be configured only when MCMP is enaled in the profile.
1.3.6.1.4.1.4874.2.2.45.1.1.2.1.5ColumnjuniPppProfileMulticlassReassemblyread-writecurrentEnable or disable rassembly for a particular multiclass. This can be configured only when MCMP is enaled in the profile.
1.3.6.1.4.1.4874.2.2.45.4NodejuniPppProfileConformance
1.3.6.1.4.1.4874.2.2.45.4.1NodejuniPppProfileCompliances
1.3.6.1.4.1.4874.2.2.45.4.1.1CompliancejuniPppProfileComplianceobsoleteObsolete compliance statement for entities which implement the Juniper PPP Profile MIB. This statement became obsolete when support was added for multi-link PP…
1.3.6.1.4.1.4874.2.2.45.4.1.2CompliancejuniPppProfileCompliance2obsoleteObsolete compliance statement for entities which implement the Juniper PPP Profile MIB. This statement became obsolete when support was added for negotiation o…
1.3.6.1.4.1.4874.2.2.45.4.1.3CompliancejuniPppProfileCompliance3obsoleteObsolete compliance statement for entities which implement the Juniper PPP Profile MIB. This statement became obsolete when the juniPppProfileAuthenticatorVirt…
1.3.6.1.4.1.4874.2.2.45.4.1.4CompliancejuniPppProfileCompliance4obsoleteObsolete compliance statement for entities which implement the Juniper PPP Profile MIB. This statement became obsolete when the juniPppProfileAaaProfile object…
1.3.6.1.4.1.4874.2.2.45.4.1.5CompliancejuniPppProfileCompliance5obsoleteObsolete compliance statement for entities which implement the Juniper PPP Profile MIB. This statement became obsolete when the juniPppProfileInitiateIp and ju…
1.3.6.1.4.1.4874.2.2.45.4.1.6CompliancejuniPppProfileCompliance6obsoleteObsolete compliance statement for entities which implement the Juniper PPP Profile MIB. This statement became obsolete when fragmentation and reassembly suppor…
1.3.6.1.4.1.4874.2.2.45.4.1.7CompliancejuniPppProfileCompliance7obsoleteThe compliance statement for entities which implement the Juniper PPP Profile MIB. This statement became obsolete when object juniPppProfileHashLinkSelection w…
1.3.6.1.4.1.4874.2.2.45.4.1.8CompliancejuniPppProfileCompliance8obsoleteThe compliance statement for entities which implement the Juniper PPP Profile MIB. This statement became obsolete when object juniPppProfileLcpAuthentication2 …
1.3.6.1.4.1.4874.2.2.45.4.1.9CompliancejuniPppProfileCompliance9obsoleteThe compliance statement for entities which implement the Juniper PPP Profile MIB. This statement became obsolete when object juniPppProfileIpcpDnsOption and j…
1.3.6.1.4.1.4874.2.2.45.4.1.10CompliancejuniPppProfileCompliance10currentThe compliance statement for entities which implement the Juniper PPP Profile MIB.
1.3.6.1.4.1.4874.2.2.45.4.2NodejuniPppProfileGroups
1.3.6.1.4.1.4874.2.2.45.4.2.1GroupjuniPppProfileGroupobsoleteObsolete collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This group became obsolete when support w…
1.3.6.1.4.1.4874.2.2.45.4.2.2GroupjuniPppProfileGroup2obsoleteObsolete collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This group became obsolete when support w…
1.3.6.1.4.1.4874.2.2.45.4.2.3GroupjuniPppProfileGroup3obsoleteObsolete collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This group became obsolete when the juniP…
1.3.6.1.4.1.4874.2.2.45.4.2.4GroupjuniPppProfileGroup4obsoleteObsolete collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This group became obsolete when the juniP…
1.3.6.1.4.1.4874.2.2.45.4.2.5GroupjuniPppProfileGroup5obsoleteObsolete collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This group became obsolete when the juniP…
1.3.6.1.4.1.4874.2.2.45.4.2.6GroupjuniPppProfileGroup6obsoleteObsolete collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This group became obsolete when support w…
1.3.6.1.4.1.4874.2.2.45.4.2.7GroupjuniPppProfileGroup7obsoleteObsolete collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This group became obsolete when support w…
1.3.6.1.4.1.4874.2.2.45.4.2.8GroupjuniPppProfileGroup8obsoleteObsolete collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This group became obsolete when juniPppPr…
1.3.6.1.4.1.4874.2.2.45.4.2.9GroupjuniPppProfileGroup9obsoleteObsolete collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This group became obsolete when juniPppPr…
1.3.6.1.4.1.4874.2.2.45.4.2.10GroupjuniPppProfileGroup10obsoleteA collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This group became obsolete when juniPppProfileIp…
1.3.6.1.4.1.4874.2.2.45.4.2.11GroupjuniPppProfileGroup11currentObsolete collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This was obsoleted when the support for m…
1.3.6.1.4.1.4874.2.2.45.4.2.12GroupjuniPppProfileGroup12currentA collection of objects providing management of profile functionality for PPP interfaces in a Juniper product.
1.3.6.1.4.1.4874.2.2.45.4.2.13GroupjuniPppProfileMulticlassTrafficClassGroup1currentA collection of object providing management of multiclass MLPPP multiclass to traffic class mapping functionality in the PPP profile in a Juniper product.
Type Definitions
NameSyntaxStatusDescription
JuniPppProfileMulticlassTcNameOCTET STRING (SIZE(0..64))currentName of the Traffic class. The bundle name is a characteristic of a MLPPP Multiclass.