Juniper-PPPOE-MIB
130 objects
The Point-to-Point Protocol over Ethernet (PPPoE) MIB for the Juniper E-series product family. This MIB contains managed objects for each of two interface layers: PPPoE interfaces, and PPPoE subinterfaces. For each of these layers, management objects are provided to query for an available interface index, and to create/delete interfaces of that type. Creating/deleting these interface types using this MIB has the side effect of creating/deleting corresponding entries in the IF-MIB ifTable/ifXTable, and in the Juniper-UNI-IF-MIB.juniIfTable.
Imported Objects
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniEnable JuniNextIfIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.18 | IdentityjuniPPPoEMIB | The Point-to-Point Protocol over Ethernet (PPPoE) MIB for the Juniper E-series product family. This MIB contains managed objects for each of two interface laye… | ||
| 1.3.6.1.4.1.4874.2.2.18.1 | NodejuniPPPoEObjects | |||
| 1.3.6.1.4.1.4874.2.2.18.1.1 | NodejuniPPPoEIfLayer | |||
| 1.3.6.1.4.1.4874.2.2.18.1.1.1 | ScalarjuniPPPoENextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in juniPPPoEIfTable. A GET of this object returns the next available ifIndex value to be used to create an entr… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2 | TablejuniPPPoEIfTable | not-accessible | current | The parameters for the PPPoE service on this interface. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1 | RowjuniPPPoEIfEntry | not-accessible | current | The Parameters for a particular PPPoE interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTabl… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.1 | ColumnjuniPPPoEIfIfIndex | read-only | current | The ifIndex value of the corresponding ifEntry. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.2 | ColumnjuniPPPoEIfMaxNumSessions | read-create | current | The number of sessions allowed on the PPPoE interface, zero indicates unlimited. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.3 | ColumnjuniPPPoEIfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.4 | ColumnjuniPPPoEIfLowerIfIndex | read-create | current | The ifIndex of an interface over which this PPPoE interface is to be layered. A value of zero indicates no layering. An implementation may choose to require th… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.5 | ColumnjuniPPPoEIfAcName | read-create | current | The name to use for the AC-NAME tag that is sent in any PADO that is sent on this interface. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.6 | ColumnjuniPPPoEIfDupProtect | read-create | current | Flag to allow duplicate MAC addresses. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.7 | ColumnjuniPPPoEIfPADIFlag | read-create | current | This flag controls whether we always respond to a PADI with a PADO regardless of the ability to create the session and allows the session establish phase to re… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.8 | ColumnjuniPPPoEIfAutoconfig | read-create | current | This flags determines whether the upper PPPoE interface is created dynamically or statically. When enable(1) the interface is created dynamically. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.9 | ColumnjuniPPPoEIfServiceNameTable | read-create | current | Associate a PPPoE Service Name Table with this interface for PADI processing. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.10 | ColumnjuniPPPoEIfPadrRemoteCircuitIdCapture | read-create | current | This flags determines whether the remote circuit id string will be captured and subsequently used as the NAS-PORT-ID radius attribute when it arrives as a tag … |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.11 | ColumnjuniPPPoEIfMtu | read-write | current | The initial Maximum Transmit Unit (MTU) that the PPPoE major interface entity will advertise to the remote entity. If the value of this variable is 1 then the … |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.12 | ColumnjuniPPPoEIfLockoutMin | read-write | current | The lower bound, in seconds, of the time range used to specify the duration of the lockout of the client from recognition for the specified interface. This onl… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.13 | ColumnjuniPPPoEIfLockoutMax | read-write | current | The upper bound, in seconds, of the time range used to specify the duration of the lockout of the client from recognition for the specified interface. This onl… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.14 | ColumnjuniPPPoEMaxSessionVsa | read-write | current | Configure the action to be taken by PPPoE when RADIUS server returns the PPPoE max-session value: override Override the current PPPoE max-session value with th… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3 | TablejuniPPPoEIfStatsTable | not-accessible | current | The statistics for the PPP over Ethernet Interface for the PPPoE service on this interface. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1 | RowjuniPPPoEIfStatsEntry | not-accessible | current | The statistics for a particular PPPoE Interface. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.1 | ColumnjuniPPPoEIfStatsRxPADI | read-only | current | Number of PADI packets received. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.2 | ColumnjuniPPPoEIfStatsTxPADO | read-only | current | Number of PADO packets transmitted. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.3 | ColumnjuniPPPoEIfStatsRxPADR | read-only | current | Number of PADR packets received. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.4 | ColumnjuniPPPoEIfStatsTxPADS | read-only | current | Number of PADS packets transmitted. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.5 | ColumnjuniPPPoEIfStatsRxPADT | read-only | current | Number of PADT packets received. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.6 | ColumnjuniPPPoEIfStatsTxPADT | read-only | current | Number of PADT packets transmitted. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.7 | ColumnjuniPPPoEIfStatsRxInvVersion | read-only | current | Number of packets received with invalid version. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.8 | ColumnjuniPPPoEIfStatsRxInvCode | read-only | current | Number of packets received with invalid code. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.9 | ColumnjuniPPPoEIfStatsRxInvTags | read-only | current | Number of packets received with invalid tags. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.10 | ColumnjuniPPPoEIfStatsRxInvSession | read-only | obsolete | Number of packets received with invalid session identifiers. This object became obsolete when separate counters were added for PADI and PADR packets. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.11 | ColumnjuniPPPoEIfStatsRxInvTypes | read-only | current | Number of packets received with invalid types. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.12 | ColumnjuniPPPoEIfStatsRxInvPackets | read-only | current | Number of invalid packets received. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.13 | ColumnjuniPPPoEIfStatsRxInsufficientResources | read-only | current | Number of session requests that could not be honored due to invalid resources. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.14 | ColumnjuniPPPoEIfStatsTxPADM | read-only | current | Number of PADM packets transmitted. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.15 | ColumnjuniPPPoEIfStatsTxPADN | read-only | current | Number of PADN packets transmitted. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.16 | ColumnjuniPPPoEIfStatsRxInvTagLength | read-only | current | Number of packets received with invalid tag length. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.17 | ColumnjuniPPPoEIfStatsRxInvLength | read-only | current | Number of packets received with invalid length. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.18 | ColumnjuniPPPoEIfStatsRxInvPadISession | read-only | current | Number of PADI packets received with invalid session identifiers. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.19 | ColumnjuniPPPoEIfStatsRxInvPadRSession | read-only | current | Number of PADR packets received with invalid session identifiers. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.4 | TablejuniPPPoEIfLockoutTable | not-accessible | current | The lockout configuration and state of a PPPoE client on this interface. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.4.1 | RowjuniPPPoEIfLockoutEntry | not-accessible | current | Each entry contains the configuration and state of a particular PPPoE interface client lockout. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.4.1.1 | ColumnjuniPPPoEIfLockoutClientAddress | not-accessible | current | The source MAC address if the client. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.4.1.2 | ColumnjuniPPPoEIfLockoutTime | read-only | current | The time duration, in seconds, currently used to lockout the specified encapsulation type from recognition for the specified interface. The reported value is w… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.4.1.3 | ColumnjuniPPPoEIfLockoutElapsedTime | read-only | current | The elapsed time, in seconds, that the specified encapsulation type has been locked-out from recognition for the specified interface. Its value will not exceed… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.4.1.4 | ColumnjuniPPPoEIfLockoutNextTime | read-only | current | The time duration, in seconds, that will be used to lockout the specified encapsulation type from recognition for the specified interface for the next event th… |
| 1.3.6.1.4.1.4874.2.2.18.1.2 | NodejuniPPPoESubIfLayer | |||
| 1.3.6.1.4.1.4874.2.2.18.1.2.1 | ScalarjuniPPPoESubIfNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in juniPPPoESubIfTable. A GET of this object returns the next available ifIndex value to be used to create an e… |
| 1.3.6.1.4.1.4874.2.2.18.1.2.2 | TablejuniPPPoESubIfTable | not-accessible | current | This table contains entries for PPPoE Subinterfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.18.1.2.2.1 | RowjuniPPPoESubIfEntry | not-accessible | current | Each entry describes the characteristics of a PPPoE Subinterface. Creating/deleting entries in this table causes corresponding entries for be created /deleted … |
| 1.3.6.1.4.1.4874.2.2.18.1.2.2.1.1 | ColumnjuniPPPoESubIfIndex | not-accessible | current | The ifIndex of the PPPoE Subinterface. When creating entries in this table, suitable values for this object are determined by reading juniPPPoESubNextIfIndex. |
| 1.3.6.1.4.1.4874.2.2.18.1.2.2.1.2 | ColumnjuniPPPoESubIfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.18.1.2.2.1.3 | ColumnjuniPPPoESubIfLowerIfIndex | read-create | current | The ifIndex of a PPPoE interface over which this PPPoE Subinterface is to be layered. A value of zero indicates no layering. An implementation may choose to re… |
| 1.3.6.1.4.1.4874.2.2.18.1.2.2.1.4 | ColumnjuniPPPoESubIfId | read-create | current | An integer identifier for the PPPoE subinterface, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. T… |
| 1.3.6.1.4.1.4874.2.2.18.1.2.2.1.5 | ColumnjuniPPPoESubIfSessionId | read-only | current | The current sessionId associated with this sub-interface. |
| 1.3.6.1.4.1.4874.2.2.18.1.2.2.1.6 | ColumnjuniPPPoESubIfMotm | read-create | current | A message to send via a PADM on the sub-interface when the sub-interface transitions to the ifOperStatusUp state. The client may choose to display this message… |
| 1.3.6.1.4.1.4874.2.2.18.1.2.2.1.7 | ColumnjuniPPPoESubIfUrl | read-create | current | A URL to be sent via a PADM on the sub-interface when the sub-interface transitions to the ifOperStatusUp state. The client may use this URL as the initial web… |
| 1.3.6.1.4.1.4874.2.2.18.1.3 | NodejuniPPPoEGlobal | |||
| 1.3.6.1.4.1.4874.2.2.18.1.3.1 | ScalarjuniPPPoEGlobalMotm | read-write | current | A message to send via a PADM to all sub-interface that are currently in ifOperStatusUp state. A client may choose to display this information to the user. Retr… |
| 1.3.6.1.4.1.4874.2.2.18.1.4 | NodejuniPPPoEProfile | |||
| 1.3.6.1.4.1.4874.2.2.18.1.4.1 | TablejuniPPPoEProfileTable | not-accessible | deprecated | This table contains entries for the PPPoE portion of a profile entry. |
| 1.3.6.1.4.1.4874.2.2.18.1.4.1.1 | RowjuniPPPoEProfileEntry | not-accessible | deprecated | Each entry describes the characteristics of the PPPoE components of a profile entry. Each entry is applied to an interface when the IP interface above the PPPo… |
| 1.3.6.1.4.1.4874.2.2.18.1.4.1.1.1 | ColumnjuniPPPoEProfileIndex | not-accessible | deprecated | This is the index of the profile that the attributes are being set in. The index must exist before creating a row in this table. The index is equivalent to jun… |
| 1.3.6.1.4.1.4874.2.2.18.1.4.1.1.2 | ColumnjuniPPPoEProfileRowStatus | read-create | deprecated | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.18.1.4.1.1.3 | ColumnjuniPPPoEProfileMotm | read-create | deprecated | A message to send via a PADM on the sub-interface when this profile is applied to the IP interface above this PPPoE sub-interface. A client may choose to displ… |
| 1.3.6.1.4.1.4874.2.2.18.1.4.1.1.4 | ColumnjuniPPPoEProfileUrl | read-create | deprecated | A URL to be sent via a PADM on the sub-interface when this profile is applied to the IP interface above this PPPoE sub-interface. The string entered here can h… |
| 1.3.6.1.4.1.4874.2.2.18.1.5 | NodejuniPPPoESummary | |||
| 1.3.6.1.4.1.4874.2.2.18.1.5.1 | ScalarjuniPPPoEMajorInterfaceCount | read-only | current | The total number of PPPoE major interfaces configured and created in the system. |
| 1.3.6.1.4.1.4874.2.2.18.1.5.2 | ScalarjuniPPPoESummaryMajorIfAdminUp | read-only | current | The total number of PPPoE major interfaces in the system that are administratively configured to up(1). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.3 | ScalarjuniPPPoESummaryMajorIfAdminDown | read-only | current | The total number of PPPoE major interfaces in the system that are administrateively configued to down(2). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.4 | ScalarjuniPPPoESummaryMajorIfOperUp | read-only | current | The total number of PPPoE major interfaces in the system with an operational state of up(1). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.5 | ScalarjuniPPPoESummaryMajorIfOperDown | read-only | current | The total number of PPPoE major interfaces in the system with an operational state of down(2). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.6 | ScalarjuniPPPoESummaryMajorIfLowerLayerDown | read-only | current | The total number of PPPoE major interfaces in the system with an operational state of lowerLayerDown(7). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.7 | ScalarjuniPPPoESummaryMajorIfNotPresent | read-only | current | The total number of PPPoE major interfaces in the system with an operational state of notPresent(6). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.8 | ScalarjuniPPPoESummarySubInterfaceCount | read-only | current | The total number of PPPoE subinterfaces configured in the system. |
| 1.3.6.1.4.1.4874.2.2.18.1.5.9 | ScalarjuniPPPoESummarySubIfAdminUp | read-only | current | The total number of PPPoE subinterfaces in the system that are administratively configured to up(1). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.10 | ScalarjuniPPPoESummarySubIfAdminDown | read-only | current | The total number of PPPoE subinterfaces in the system that are administrateively configued to down(2). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.11 | ScalarjuniPPPoESummarySubIfOperUp | read-only | current | The total number of PPPoE subinterfaces in the system with an operational state of up(1). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.12 | ScalarjuniPPPoESummarySubIfOperDown | read-only | current | The total number of PPPoE subinterfaces in the system with an operational state of down(2). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.13 | ScalarjuniPPPoESummarySubIfLowerLayerDown | read-only | current | The total number of PPPoE subinterfaces in the system with an operational state of lowerLayerDown(7). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.14 | ScalarjuniPPPoESummarySubIfNotPresent | read-only | current | The total number of PPPoE subinterfaces in the system with an operational state of notPresent(6). |
| 1.3.6.1.4.1.4874.2.2.18.1.6 | NodejuniPPPoEServices | |||
| 1.3.6.1.4.1.4874.2.2.18.1.6.1 | ScalarjuniPPPoEServiceNameTableNextIndex | read-only | current | Coordinate ifIndex value allocation for entries in juniPPPoEServiceNameTableTable. A GET of this object returns the next available ifIndex value to be used to … |
| 1.3.6.1.4.1.4874.2.2.18.1.6.2 | TablejuniPPPoEServiceNameTableTable | not-accessible | current | This table contains entries for the PPPoE Service-name tables. |
| 1.3.6.1.4.1.4874.2.2.18.1.6.2.1 | RowjuniPPPoEServiceNameTableEntry | not-accessible | current | The parameters for the PPPoE service-name table. |
| 1.3.6.1.4.1.4874.2.2.18.1.6.2.1.1 | ColumnjuniPPPoEServiceNameTableIndex | not-accessible | current | The index value of the Service-name Table Entry. |
| 1.3.6.1.4.1.4874.2.2.18.1.6.2.1.2 | ColumnjuniPPPoEServiceNameTableName | read-create | current | Service-name table name. |
| 1.3.6.1.4.1.4874.2.2.18.1.6.2.1.3 | ColumnjuniPPPoEServiceNameTableEmptyAction | read-create | current | Identifies the behavior when the empty (zero length) Service-name tag is received in a PADI frame. |
| 1.3.6.1.4.1.4874.2.2.18.1.6.2.1.4 | ColumnjuniPPPoEServiceNameTableRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.18.1.6.2.1.5 | ColumnjuniPPPoEServiceNameTableUnknownAction | read-create | current | Identifies the behavior when the unknown (unconfigured) Service-name tag is received in a PADI frame. |
| 1.3.6.1.4.1.4874.2.2.18.1.6.3 | TablejuniPPPoEServiceNameTable | not-accessible | current | This table contains entries for the PPPoE Service-names. |
| 1.3.6.1.4.1.4874.2.2.18.1.6.3.1 | RowjuniPPPoEServiceNameEntry | not-accessible | current | The parameters for the PPPoE service-name table entry. |
| 1.3.6.1.4.1.4874.2.2.18.1.6.3.1.1 | ColumnjuniPPPoEServiceName | not-accessible | current | Service-name tag value. |
| 1.3.6.1.4.1.4874.2.2.18.1.6.3.1.2 | ColumnjuniPPPoEServiceNameAction | read-create | current | Identifies the behavior when the Service-name tag is received in a PADI/PADR frame. |
| 1.3.6.1.4.1.4874.2.2.18.1.6.3.1.3 | ColumnjuniPPPoEServiceNameRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.18.4 | NodejuniPPPoEConformance | |||
| 1.3.6.1.4.1.4874.2.2.18.4.4 | NodejuniPPPoEGroups | |||
| 1.3.6.1.4.1.4874.2.2.18.4.4.1 | GroupjuniPPPoEGroup | obsolete | Obsolete collection of objects providing management of PPPoE interfaces in a Juniper product. This statement became obsolete when new objects were added. | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.2 | GroupjuniPPPoESubIfGroup | obsolete | Obsolete collection of objects providing management of PPPoE subinterfaces in a Juniper product. This statement became obsolete when new sub-interface objects … | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.3 | GroupjuniPPPoEProfileGroup | deprecated | A collection of objects providing management of PPPoE profile entries in a Juniper product. This group has been deprecated because the information is now suppo… | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.4 | GroupjuniPPPoEGroup2 | obsolete | Obsolete collection of objects providing management of PPPoE interfaces in a Juniper product. This statement became obsolete when new objects were added. | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.5 | GroupjuniPPPoESubIfGroup2 | current | A collection of objects providing management of PPPoE subinterfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.6 | GroupjuniPPPoESummaryGroup | current | A collection of objects providing collection of summary statistics on PPPoE interfaces. | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.7 | GroupjuniPPPoEGroup3 | obsolete | Obsolete collection of objects providing management of PPPoE interfaces in a Juniper product. This group became obsolete when PADI flag support was added. | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.8 | GroupjuniPPPoEGroup4 | obsolete | Obsolete collection of objects providing management of PPPoE interfaces in a Juniper product. This group became obsolete when PADN counter support was added. | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.9 | GroupjuniPPPoEGroup5 | obsolete | Obsolete collection of objects providing management of PPPoE interfaces in a Juniper product. This group became obsolete when support was added for invalid len… | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.10 | GroupjuniPPPoEGroup6 | obsolete | A collection of objects providing management of PPPoE interfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.11 | GroupjuniPPPoEServiceNameTableGroup | obsolete | A collection of objects providing management of PPPoE service-name tables in a Juniper product. This group became obsolete when juniPPPoEServiceNameTableUnknow… | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.12 | GroupjuniPPPoEGroup7 | obsolete | A collection of objects providing management of PPPoE interfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.13 | GroupjuniPPPoEGroup8 | current | A collection of objects providing management of PPPoE interfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.14 | GroupjuniPPPoELockoutTableGroup | current | A collection of objects providing management of PPPoE lockout tables in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.15 | GroupjuniPPPoEGroup9 | obsolete | A collection of objects providing management of PPPoE interfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.16 | GroupjuniPPPoEGroup10 | current | A collection of objects providing management of PPPoE interfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.17 | GroupjuniPPPoEServiceNameTableGroup1 | current | A collection of objects providing management of PPPoE service-name tables in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.18.4.5 | NodejuniPPPoECompliances | |||
| 1.3.6.1.4.1.4874.2.2.18.4.5.1 | CompliancejuniPPPoECompliance | obsolete | Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when profile support and new sub-interface obj… | |
| 1.3.6.1.4.1.4874.2.2.18.4.5.2 | CompliancejuniPPPoECompliance2 | obsolete | Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when interface summary statistics objects were… | |
| 1.3.6.1.4.1.4874.2.2.18.4.5.3 | CompliancejuniPPPoECompliance3 | obsolete | Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when the profile objects were deprecated. | |
| 1.3.6.1.4.1.4874.2.2.18.4.5.4 | CompliancejuniPPPoECompliance4 | obsolete | Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when new objects were added. | |
| 1.3.6.1.4.1.4874.2.2.18.4.5.5 | CompliancejuniPPPoECompliance5 | obsolete | Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when PADI flag support was added. | |
| 1.3.6.1.4.1.4874.2.2.18.4.5.6 | CompliancejuniPPPoECompliance6 | obsolete | Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when PADN counter support was added. | |
| 1.3.6.1.4.1.4874.2.2.18.4.5.7 | CompliancejuniPPPoECompliance7 | obsolete | Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when support was added for service name table,… | |
| 1.3.6.1.4.1.4874.2.2.18.4.5.8 | CompliancejuniPPPoECompliance8 | obsolete | Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when support was added for remote circuit id c… | |
| 1.3.6.1.4.1.4874.2.2.18.4.5.9 | CompliancejuniPPPoECompliance9 | obsolete | Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when support was added for MTU configuration. | |
| 1.3.6.1.4.1.4874.2.2.18.4.5.10 | CompliancejuniPPPoECompliance10 | obsolete | Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when support was added for lockout configurati… | |
| 1.3.6.1.4.1.4874.2.2.18.4.5.11 | CompliancejuniPPPoECompliance11 | obsolete | Obsolete compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when support was added for juniPPPoEMaxSession… | |
| 1.3.6.1.4.1.4874.2.2.18.4.5.12 | CompliancejuniPPPoECompliance12 | obsolete | The compliance statement for entities which implement the Juniper PPPoE MIB. This statement became obsolete when support was added for juniPPPoEServiceNameTabl… | |
| 1.3.6.1.4.1.4874.2.2.18.4.5.13 | CompliancejuniPPPoECompliance13 | current | The compliance statement for entities which implement the Juniper PPPoE MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| JuniPPPoEServiceNameAction | INTEGER { drop(0), terminate(1) } | current | The set of Service-name action types. drop no PADO packet will be sent. terminate a PADO packet will be sent. |