Juniper-RADIUS-CLIENT-MIB
397 objects
The Remote Authentication Dial In User Service (RADIUS) Client MIB for the Juniper enterprise.
Imported Objects
| Juniper-MIBs | juniMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.19 | IdentityjuniRadiusClientMIB | The Remote Authentication Dial In User Service (RADIUS) Client MIB for the Juniper enterprise. | ||
| 1.3.6.1.4.1.4874.2.2.19.1 | NodejuniRadiusClientObjects | |||
| 1.3.6.1.4.1.4874.2.2.19.1.1 | NodejuniRadiusGeneralClient | |||
| 1.3.6.1.4.1.4874.2.2.19.1.1.1 | ScalarjuniRadiusClientIdentifier | read-only | current | The NAS-Identifier of the RADIUS client. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.2 | ScalarjuniRadiusClientAlgorithm | read-write | current | The algorithm used by the client when multiple authentication/accounting servers are configured: direct Use servers in order of precedence, each time beginning… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.3 | ScalarjuniRadiusClientSourceAddress | read-write | current | The source address used by the RADIUS client in requests to the RADIUS server. The RADIUS server returns responses from this address. Setting this object to 0.… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.4 | ScalarjuniRadiusClientUdpChecksum | read-write | current | Enables/disables the checksum calculations on RADIUS UDP packets. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.5 | ScalarjuniRadiusClientNasIdentifier | read-write | current | The identifier used by the client for the value of NAS-Identifier attribute (number 32) in access and accounting requests. The default is to use the system nam… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.6 | ScalarjuniRadiusClientDslPortType | read-write | current | The value to use in the NAS-Port-Type RADIUS Attribute (attribute number 61) for DSL interfaces in the RADIUS access and accounting messages: virtual Used for … |
| 1.3.6.1.4.1.4874.2.2.19.1.1.7 | ScalarjuniRadiusClientTunnelAccounting | read-write | current | Enables/disables the tunnel accounting feature, which causes the system to send tunnel and session accounting requests. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.8 | ScalarjuniRadiusClientAcctSessionIdFormat | read-write | current | The format used by the client for the Acct-Session-ID attribute (attribute number 44): decimal Use an ASCII decimal value only in the Acct-Session-ID attribute… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.9 | ScalarjuniRadiusClientNasPortFormat | read-write | current | The format used by the client for the NAS-Port attribute (attribute number 5): xssssppp In the NAS-Port attribute (attribute 5) use format of 0 bit, followed b… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.10 | ScalarjuniRadiusClientCallingStationDelimiter | read-write | current | The character use as for delimiting fields in the Calling-Station-ID attribute (attribute 31, from RFC 2865) sent by the client. The default value is '#'. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.11 | ScalarjuniRadiusClientEthernetPortType | read-write | current | The value to use in the NAS-Port-Type RADIUS Attribute (attribute number 61) for Ethernet interfaces in the RADIUS access and accounting messages: ethernet Use… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.12 | ScalarjuniRadiusClientIncludeIpAddrInAcctStart | read-write | current | Enables/disables the inclusion of the Framed-IP-Address attribute in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.13 | ScalarjuniRadiusClientIncludeAcctSessionIdInAccessReq | read-write | current | Enables/disables the inclusion of the Acct-Session-ID attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.14 | ScalarjuniRadiusClientRollover | read-write | current | Enables/disables the rollover to next server on receipt of access-reject. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.15 | ScalarjuniRadiusClientCallingStationIdFormat | read-write | current | The format used by the client for the Calling-Station-ID attribute (attribute number 31): delimited In the Calling-Station-ID attribute (attribute 31) use the … |
| 1.3.6.1.4.1.4874.2.2.19.1.1.16 | ScalarjuniRadiusClientNasIpAddrUse | read-write | current | The value used by the client for the NAS-IP-Addr attribute (attribute number 4): normal Use the ERX IP address value in the NAS-IP-Addr attribute (attribute 4)… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.17 | ScalarjuniRadiusClientIncludeAcctTunnelConnectionInAccessReq | read-write | current | Enables/disables the inclusion of the Acct-Tunnel-Connection attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.18 | ScalarjuniRadiusClientIncludeCalledStationIdInAccessReq | read-write | current | Enables/disables the inclusion of the Called-Station-ID attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.19 | ScalarjuniRadiusClientIncludeCallingStationIdInAccessReq | read-write | current | Enables/disables the inclusion of the Calling-Station-ID attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.20 | ScalarjuniRadiusClientIncludeConnectInfoInAccessReq | read-write | current | Enables/disables the inclusion of the Connect-Info attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.21 | ScalarjuniRadiusClientIncludeNasIdentifierInAccessReq | read-write | current | Enables/disables the inclusion of the NAS-Identifier attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.22 | ScalarjuniRadiusClientIncludeNasPortInAccessReq | read-write | current | Enables/disables the inclusion of the NAS-Port attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.23 | ScalarjuniRadiusClientIncludeNasPortIdInAccessReq | read-write | current | Enables/disables the inclusion of the NAS-Port-ID attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.24 | ScalarjuniRadiusClientIncludeNasPortTypeInAccessReq | read-write | current | Enables/disables the inclusion of the NAS-Port-Type attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.25 | ScalarjuniRadiusClientIncludePppoeDescriptionInAccessReq | read-write | current | Enables/disables the inclusion of the PPPoE-Description (VSA) attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.26 | ScalarjuniRadiusClientIncludeTunnelClientAuthIdInAccessReq | read-write | current | Enables/disables the inclusion of the Tunnel-Client-Auth-Id attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.27 | ScalarjuniRadiusClientIncludeTunnelClientEndpointInAccessReq | read-write | current | Enables/disables the inclusion of the Tunnel-Client-Endpoint attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.28 | ScalarjuniRadiusClientIncludeTunnelMediumTypeInAccessReq | read-write | current | Enables/disables the inclusion of the Tunnel-Medium attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.29 | ScalarjuniRadiusClientIncludeTunnelServerAttributesInAccessReq | read-write | current | Enables/disables the inclusion of the Tunnel-Server attributes (Tunnel attributes for a PPP session terminated on the LNS) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.30 | ScalarjuniRadiusClientIncludeTunnelServerAuthIdInAccessReq | read-write | current | Enables/disables the inclusion of the Tunnel-Server-Auth-Id attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.31 | ScalarjuniRadiusClientIncludeTunnelServerEndpointInAccessReq | read-write | current | Enables/disables the inclusion of the Tunnel-Server-Endpoint attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.32 | ScalarjuniRadiusClientIncludeTunnelTypeInAccessReq | read-write | current | Enables/disables the inclusion of the Tunnel-Type attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.33 | ScalarjuniRadiusClientIncludeAcctTunnelConnectionInAcctStart | read-write | current | Enables/disables the inclusion of the Acct-Tunnel-Connection attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.34 | ScalarjuniRadiusClientIncludeCalledStationIdInAcctStart | read-write | current | Enables/disables the inclusion of the Called-Station-ID attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.35 | ScalarjuniRadiusClientIncludeCallingStationIdInAcctStart | read-write | current | Enables/disables the inclusion of the Calling-Station-ID attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.36 | ScalarjuniRadiusClientIncludeClassInAcctStart | read-write | current | Enables/disables the inclusion of the Class attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.37 | ScalarjuniRadiusClientIncludeConnectInfoInAcctStart | read-write | current | Enables/disables the inclusion of the Connect-Info attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.38 | ScalarjuniRadiusClientIncludeEgressPolicyNameInAcctStart | read-write | current | Enables/disables the inclusion of the Egress-Policy-Name (VSA) attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.39 | ScalarjuniRadiusClientIncludeEventTimestampInAcctStart | read-write | current | Enables/disables the inclusion of the Event-Timestamp attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.40 | ScalarjuniRadiusClientIncludeFramedCompressionInAcctStart | read-write | current | Enables/disables the inclusion of the Framed-Compression attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.41 | ScalarjuniRadiusClientIncludeFramedIpNetmaskInAcctStart | read-write | current | Enables/disables the inclusion of the Framed-IP-Netmask attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.42 | ScalarjuniRadiusClientIncludeIngressPolicyNameInAcctStart | read-write | current | Enables/disables the inclusion of the Ingress-Policy-Name (VSA) attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.43 | ScalarjuniRadiusClientIncludeNasIdentifierInAcctStart | read-write | current | Enables/disables the inclusion of the NAS-Identifier attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.44 | ScalarjuniRadiusClientIncludeNasPortInAcctStart | read-write | current | Enables/disables the inclusion of the NAS-Port attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.45 | ScalarjuniRadiusClientIncludeNasPortIdInAcctStart | read-write | current | Enables/disables the inclusion of the NAS-Port-ID attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.46 | ScalarjuniRadiusClientIncludeNasPortTypeInAcctStart | read-write | current | Enables/disables the inclusion of the NAS-Port-Type attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.47 | ScalarjuniRadiusClientIncludePppoeDescriptionInAcctStart | read-write | current | Enables/disables the inclusion of the PPPoE-Description (VSA) attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.48 | ScalarjuniRadiusClientIncludeTunnelAssignmentIdInAcctStart | read-write | current | Enables/disables the inclusion of the Tunnel-Assignment-Id attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.49 | ScalarjuniRadiusClientIncludeTunnelClientAuthIdInAcctStart | read-write | current | Enables/disables the inclusion of the Tunnel-Client-Auth-Id attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.50 | ScalarjuniRadiusClientIncludeTunnelClientEndpointInAcctStart | read-write | current | Enables/disables the inclusion of the Tunnel-Client-Endpoint attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.51 | ScalarjuniRadiusClientIncludeTunnelMediumTypeInAcctStart | read-write | current | Enables/disables the inclusion of the Tunnel-Medium attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.52 | ScalarjuniRadiusClientIncludeTunnelPreferenceInAcctStart | read-write | current | Enables/disables the inclusion of the Tunnel-Preference attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.53 | ScalarjuniRadiusClientIncludeTunnelServerAttributesInAcctStart | read-write | current | Enables/disables the inclusion of the Tunnel-Server attributes (Tunnel attributes for a PPP session terminated on the LNS) in the RADIUS Accounting-Start packe… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.54 | ScalarjuniRadiusClientIncludeTunnelServerAuthIdInAcctStart | read-write | current | Enables/disables the inclusion of the Tunnel-Server-Auth-Id attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.55 | ScalarjuniRadiusClientIncludeTunnelServerEndpointInAcctStart | read-write | current | Enables/disables the inclusion of the Tunnel-Server-Endpoint attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.56 | ScalarjuniRadiusClientIncludeTunnelTypeInAcctStart | read-write | current | Enables/disables the inclusion of the Tunnel-Type attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.57 | ScalarjuniRadiusClientIncludeAcctTunnelConnectionInAcctStop | read-write | current | Enables/disables the inclusion of the Acct-Tunnel-Connection attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.59 | ScalarjuniRadiusClientIncludeCalledStationIdInAcctStop | read-write | current | Enables/disables the inclusion of the Called-Station-ID attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.60 | ScalarjuniRadiusClientIncludeCallingStationIdInAcctStop | read-write | current | Enables/disables the inclusion of the Calling-Station-ID attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.61 | ScalarjuniRadiusClientIncludeClassInAcctStop | read-write | current | Enables/disables the inclusion of the Class attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.62 | ScalarjuniRadiusClientIncludeConnectInfoInAcctStop | read-write | current | Enables/disables the inclusion of the Connect-Info attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.63 | ScalarjuniRadiusClientIncludeEgressPolicyNameInAcctStop | read-write | current | Enables/disables the inclusion of the Egress-Policy-Name (VSA) attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.64 | ScalarjuniRadiusClientIncludeEventTimestampInAcctStop | read-write | current | Enables/disables the inclusion of the Event-Timestamp attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.65 | ScalarjuniRadiusClientIncludeFramedCompressionInAcctStop | read-write | current | Enables/disables the inclusion of the Framed-Compression attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.66 | ScalarjuniRadiusClientIncludeFramedIpNetmaskInAcctStop | read-write | current | Enables/disables the inclusion of the Framed-IP-Netmask attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.67 | ScalarjuniRadiusClientIncludeIngressPolicyNameInAcctStop | read-write | current | Enables/disables the inclusion of the Ingress-Policy-Name (VSA) attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.68 | ScalarjuniRadiusClientIncludeInputGigawordsInAcctStop | read-write | current | Enables/disables the inclusion of the Input-Gigawords attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.69 | ScalarjuniRadiusClientIncludeNasIdentifierInAcctStop | read-write | current | Enables/disables the inclusion of the NAS-Identifier attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.70 | ScalarjuniRadiusClientIncludeNasPortInAcctStop | read-write | current | Enables/disables the inclusion of the NAS-Port attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.71 | ScalarjuniRadiusClientIncludeNasPortIdInAcctStop | read-write | current | Enables/disables the inclusion of the NAS-Port-ID attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.72 | ScalarjuniRadiusClientIncludeNasPortTypeInAcctStop | read-write | current | Enables/disables the inclusion of the NAS-Port-Type attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.73 | ScalarjuniRadiusClientIncludeOutputGigawordsInAcctStop | read-write | current | Enables/disables the inclusion of the Output-Gigawords attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.74 | ScalarjuniRadiusClientIncludePppoeDescriptionInAcctStop | read-write | current | Enables/disables the inclusion of the PPPoE-Description (VSA) attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.75 | ScalarjuniRadiusClientIncludeTunnelAssignmentIdInAcctStop | read-write | current | Enables/disables the inclusion of the Tunnel-Assignment-Id attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.76 | ScalarjuniRadiusClientIncludeTunnelClientAuthIdInAcctStop | read-write | current | Enables/disables the inclusion of the Tunnel-Client-Auth-Id attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.77 | ScalarjuniRadiusClientIncludeTunnelClientEndpointInAcctStop | read-write | current | Enables/disables the inclusion of the Tunnel-Client-Endpoint attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.78 | ScalarjuniRadiusClientIncludeTunnelMediumTypeInAcctStop | read-write | current | Enables/disables the inclusion of the Tunnel-Medium attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.79 | ScalarjuniRadiusClientIncludeTunnelPreferenceInAcctStop | read-write | current | Enables/disables the inclusion of the Tunnel-Preference attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.80 | ScalarjuniRadiusClientIncludeTunnelServerAttributesInAcctStop | read-write | current | Enables/disables the inclusion of the Tunnel-Server attributes (Tunnel attributes for a PPP session terminated on the LNS) in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.81 | ScalarjuniRadiusClientIncludeTunnelServerAuthIdInAcctStop | read-write | current | Enables/disables the inclusion of the Tunnel-Server-Auth-Id attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.82 | ScalarjuniRadiusClientIncludeTunnelServerEndpointInAcctStop | read-write | current | Enables/disables the inclusion of the Tunnel-Server-Endpoint attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.83 | ScalarjuniRadiusClientIncludeTunnelTypeInAcctStop | read-write | current | Enables/disables the inclusion of the Tunnel-Type attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.84 | ScalarjuniRadiusClientIncludeInputGigapktsInAcctStop | read-write | current | Enables/disables the inclusion of the Input-Gigapkts attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.85 | ScalarjuniRadiusClientIncludeOutputGigapktsInAcctStop | read-write | current | Enables/disables the inclusion of the Output-Gigapkts attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.86 | ScalarjuniRadiusClientIgnoreFramedIpNetmask | read-write | current | Enables/disables ignoring the Framed-IP-Netmask attribute in the RADIUS Access-Accept packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.87 | ScalarjuniRadiusClientIgnoreAtmCategory | read-write | current | Enables/disables ignoring the ATM-Category (vsa) attribute in the RADIUS Access-Accept packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.88 | ScalarjuniRadiusClientIgnoreAtmMbs | read-write | current | Enables/disables ignoring the ATM-MBS (vsa) attribute in the RADIUS Access-Accept packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.89 | ScalarjuniRadiusClientIgnoreAtmPcr | read-write | current | Enables/disables ignoring the ATM-PCR (vsa) attribute in the RADIUS Access-Accept packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.90 | ScalarjuniRadiusClientIgnoreAtmScr | read-write | current | Enables/disables ignoring the ATM-SCR-Or-CBR (vsa) attribute in the RADIUS Access-Accept packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.91 | ScalarjuniRadiusClientIgnoreEgressPolicyName | read-write | current | Enables/disables ignoring the Egress-Policy-Name (vsa) attribute in the RADIUS Access-Accept packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.92 | ScalarjuniRadiusClientIgnoreIngressPolicyName | read-write | current | Enables/disables ignoring the Ingress-Policy-Name (vsa) attribute in the RADIUS Access-Accept packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.93 | ScalarjuniRadiusClientIgnoreVirtualRouter | read-write | current | Enables/disables ignoring the Virtual-Router (vsa) attribute in the RADIUS Access-Accept packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.94 | ScalarjuniRadiusClientTrapOnAuthServerUnavailable | read-write | current | Enables/disables sending an SNMP trap for the condition that a specific RADIUS authentication server times out. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.95 | ScalarjuniRadiusClientTrapOnAcctServerUnavailable | read-write | current | Enables/disables sending an SNMP trap for the condition that a specific RADIUS accounting server times out. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.96 | ScalarjuniRadiusClientTrapOnNoAuthServerAvailable | read-write | current | Enables/disables sending an SNMP trap for the condition that all of the configured RADIUS authentication servers (in a virtual router context) time out. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.97 | ScalarjuniRadiusClientTrapOnNoAcctServerAvailable | read-write | current | Enables/disables sending an SNMP trap for the condition that all of the configured RADIUS accounting servers (in a virtual router context) time out. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.98 | ScalarjuniRadiusClientTrapOnAuthServerAvailable | read-write | current | Enables/disables sending an SNMP trap for the condition that a specific RADIUS authentication server has sent a response after being declared unavailable. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.99 | ScalarjuniRadiusClientTrapOnAcctServerAvailable | read-write | current | Enables/disables sending an SNMP trap for the condition that a specific RADIUS accounting server has sent a response after being declared unavailable. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.100 | ScalarjuniRadiusClientPppoeNasPortFormat | read-write | current | The format used by the client for the Nas-Port attribute (attribute number 5) for PPPoE interfaces: none Use the format specified in juniRadiusClientNasPortFor… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.101 | ScalarjuniRadiusClientIncludeTunnelInterfaceIdInAccessReq | read-write | current | Enables/disables the inclusion of the Tunnel-Interface-Id (VSA) attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.102 | ScalarjuniRadiusClientIncludeTunnelInterfaceIdInAcctStart | read-write | current | Enables/disables the inclusion of the Tunnel-Interface-Id (VSA) in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.103 | ScalarjuniRadiusClientIncludeTunnelInterfaceIdInAcctStop | read-write | current | Enables/disables the inclusion of the Tunnel-Interface-Id (VSA) in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.104 | ScalarjuniRadiusClientIncludeL2tpPppDisconnectCauseInAcctStop | read-write | current | Enables/disables the inclusion of the L2TP PPP Disconnect Cause (VSA) in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.105 | ScalarjuniRadiusClientVlanNasPortFormat | read-write | current | The format used by the client for the Nas-Port attribute (attribute number 5) for VLAN interfaces: none Include the VLAN ID if configured stacked Include both … |
| 1.3.6.1.4.1.4874.2.2.19.1.1.106 | ScalarjuniRadiusClientIncludeAcctMultiSessionIdInAccessReq | read-write | current | Enables/disables the inclusion of the Accounting Multilink Session ID in the RADIUS Access-Req packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.107 | ScalarjuniRadiusClientIncludeAcctMultiSessionIdInAcctStart | read-write | current | Enables/disables the inclusion of the Accounting Multilink Session ID in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.108 | ScalarjuniRadiusClientIncludeAcctMultiSessionIdInAcctStop | read-write | current | Enables/disables the inclusion of the Accounting Multilink Session ID in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.109 | ScalarjuniRadiusClientIncludeAscendNumInMultilinkInAccessReq | read-write | current | Enables/disables the inclusion of the Ascend Num In Multilink attribute in the RADIUS Access-Req packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.110 | ScalarjuniRadiusClientIncludeAscendNumInMultilinkInAcctStart | read-write | current | Enables/disables the inclusion of the Ascend Num In Multilink attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.111 | ScalarjuniRadiusClientIncludeAscendNumInMultilinkInAcctStop | read-write | current | Enables/disables the inclusion of the Ascend Num In Multilink attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.112 | ScalarjuniRadiusClientConnectInfoFormat | read-write | current | The format used by the client for the Connect-Info attribute (attribute number 77): default The Connect-Info Attribute is generated from the underlying interfa… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.113 | ScalarjuniRadiusClientIncludeProfileServiceDescrInAccessReq | read-write | current | Enables/disables the inclusion of the AAA profile service description attribute in the RADIUS Access-Req packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.114 | ScalarjuniRadiusClientIncludeProfileServiceDescrInAcctStart | read-write | current | Enables/disables the inclusion of the AAA profile service description attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.115 | ScalarjuniRadiusClientIncludeProfileServiceDescrInAcctStop | read-write | current | Enables/disables the inclusion of the AAA profile service description attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.116 | ScalarjuniRadiusClientIncludeAcctAuthenticInAcctOn | read-write | current | Enables/disables the inclusion of the acct-authentic attribute in the RADIUS Accounting-On packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.117 | ScalarjuniRadiusClientIncludeAcctDelayTimeInAcctOn | read-write | current | Enables/disables the inclusion of the acct-delay-time attribute in the RADIUS Accounting-On packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.118 | ScalarjuniRadiusClientIncludeAcctSessionIdInAcctOn | read-write | current | Enables/disables the inclusion of the acct-session-id attribute in the RADIUS Accounting-On packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.119 | ScalarjuniRadiusClientIncludeNasIdentifierInAcctOn | read-write | current | Enables/disables the inclusion of the nas-identifier attribute in the RADIUS Accounting-On packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.120 | ScalarjuniRadiusClientIncludeEventTimestampInAcctOn | read-write | current | Enables/disables the inclusion of the event-timestamp attribute in the RADIUS Accounting-On packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.121 | ScalarjuniRadiusClientIncludeAcctAuthenticInAcctOff | read-write | current | Enables/disables the inclusion of the acct-authentic attribute in the RADIUS Accounting-Off packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.122 | ScalarjuniRadiusClientIncludeAcctDelayTimeInAcctOff | read-write | current | Enables/disables the inclusion of the acct-delay-time attribute in the RADIUS Accounting-Off packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.123 | ScalarjuniRadiusClientIncludeAcctSessionIdInAcctOff | read-write | current | Enables/disables the inclusion of the acct-session-id attribute in the RADIUS Accounting-Off packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.124 | ScalarjuniRadiusClientIncludeAcctTerminateCauseInAcctOff | read-write | current | Enables/disables the inclusion of the acct-terminate-cause attribute in the RADIUS Accounting-Off packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.125 | ScalarjuniRadiusClientIncludeNasIdentifierInAcctOff | read-write | current | Enables/disables the inclusion of the nas-identifier attribute in the RADIUS Accounting-Off packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.126 | ScalarjuniRadiusClientIncludeEventTimestampInAcctOff | read-write | current | Enables/disables the inclusion of the event-timestamp attribute in the RADIUS Accounting-Off packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.127 | ScalarjuniRadiusClientIncludeDhcpOptionsInAccessReq | read-write | current | Enables/disables the inclusion of the Dhcp-Options (vsa) attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.128 | ScalarjuniRadiusClientIncludeDhcpMacAddressInAccessReq | read-write | current | Enables/disables the inclusion of the Dhcp-Mac-Addresss (vsa) attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.129 | ScalarjuniRadiusClientIncludeDhcpGiAddressInAccessReq | read-write | current | Enables/disables the inclusion of the Dhcp-Gi-Address (vsa) attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.130 | ScalarjuniRadiusClientIncludeDhcpOptionsInAcctStart | read-write | current | Enables/disables the inclusion of the Dhcp-Options (vsa) attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.131 | ScalarjuniRadiusClientIncludeDhcpMacAddressInAcctStart | read-write | current | Enables/disables the inclusion of the Dhcp-Mac-Addresss (vsa) attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.132 | ScalarjuniRadiusClientIncludeDhcpGiAddressInAcctStart | read-write | current | Enables/disables the inclusion of the Dhcp-Gi-Address (vsa) attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.133 | ScalarjuniRadiusClientIncludeDhcpOptionsInAcctStop | read-write | current | Enables/disables the inclusion of the Dhcp-Options (vsa) attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.134 | ScalarjuniRadiusClientIncludeDhcpMacAddressInAcctStop | read-write | current | Enables/disables the inclusion of the Dhcp-Mac-Addresss (vsa) attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.135 | ScalarjuniRadiusClientIncludeDhcpGiAddressInAcctStop | read-write | current | Enables/disables the inclusion of the Dhcp-Gi-Address (vsa) attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.136 | ScalarjuniRadiusClientNasPortIdOverrideRemoteCircuitId | read-write | current | Enables/disables overriding the Nas-Port-Id with the PPPoe Remote Circuit Id. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.137 | ScalarjuniRadiusClientCallingStationIdOverrideRemoteCircuitId | read-write | current | Enables/disables overriding the Calling-Station-Id with the PPPoe Remote Circuit Id. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.138 | ScalarjuniRadiusClientIncludeMlpppBundleNameInAccessReq | read-write | current | Enables/disables the inclusion of the MLPPP-Bundle-Name (VSA) attribute in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.139 | ScalarjuniRadiusClientIncludeMlpppBundleNameInAcctStart | read-write | current | Enables/disables the inclusion of the MLPPP-Bundle-Name (VSA) in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.140 | ScalarjuniRadiusClientIncludeMlpppBundleNameInAcctStop | read-write | current | Enables/disables the inclusion of the MLPPP-Bundle-Name (VSA) in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.141 | ScalarjuniRadiusClientOverrideNasInfo | read-write | current | Enables/disables the overriding nas-ip-address and nas-identifier by values from authentication virual router. If juniRadiusClientNasIpAddrUse is not 'normal',… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.142 | ScalarjuniRadiusClientIncludeInterfaceDescriptionInAccessReq | read-write | current | Enables/disables the inclusion of the interface description attribute in the RADIUS Access-Req packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.143 | ScalarjuniRadiusClientIncludeInterfaceDescriptionInAcctStart | read-write | current | Enables/disables the inclusion of the interface description attribute in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.144 | ScalarjuniRadiusClientIncludeInterfaceDescriptionInAcctStop | read-write | current | Enables/disables the inclusion of the interface description attribute in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.145 | ScalarjuniRadiusClientAtmNasPortFormat | read-write | current | The format used by the client for the Nas-Port attribute (attribute number 5) for ATM interfaces: none Use the format specified in juniRadiusClientNasPortForma… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.146 | ScalarjuniRadiusClientNasPortFieldWidthAtmSlot | read-write | current | Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the slot of the atm interface when the value of juniRadiusClientAtmNasPortF… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.147 | ScalarjuniRadiusClientNasPortFieldWidthAtmAdapter | read-write | current | Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the adapter of the atm interface when the value of juniRadiusClientAtmNasPo… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.148 | ScalarjuniRadiusClientNasPortFieldWidthAtmPort | read-write | current | Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the port of the atm interface when the value of juniRadiusClientAtmNasPortF… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.149 | ScalarjuniRadiusClientNasPortFieldWidthAtmVpi | read-write | current | Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the vpi of the atm interface when the value of juniRadiusClientAtmNasPortFo… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.150 | ScalarjuniRadiusClientNasPortFieldWidthAtmVci | read-write | current | Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the vci of the atm interface when the value of juniRadiusClientAtmNasPortFo… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.151 | ScalarjuniRadiusClientEthernetNasPortFormat | read-write | current | The format used by the client for the Nas-Port attribute (attribute number 5) for Ethernet interfaces: none Use the format specified in juniRadiusClientNasPort… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.152 | ScalarjuniRadiusClientNasPortFieldWidthEthernetSlot | read-write | current | Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the slot of the ethernet interface when the value of juniRadiusClientEthern… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.153 | ScalarjuniRadiusClientNasPortFieldWidthEthernetAdapter | read-write | current | Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the adapter of the ethernet interface when the value of juniRadiusClientEth… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.154 | ScalarjuniRadiusClientNasPortFieldWidthEthernetPort | read-write | current | Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the port of the ethernet interface when the value of juniRadiusClientEthern… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.155 | ScalarjuniRadiusClientNasPortFieldWidthEthernetSVlan | read-write | current | Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the svlan of the ethernet interface when the value of juniRadiusClientEther… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.156 | ScalarjuniRadiusClientNasPortFieldWidthEthernetVlan | read-write | current | Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the vlan of the ethernet interface when the value of juniRadiusClientEthern… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.157 | ScalarjuniRadiusClientRemoteCircuitIdFormat | read-write | current | The set of PPPoE Remote Circuit Id components configured. Each octet in this object contains one of the values defined in the JuniRadiusClientRemoteCircuitIdFo… |
| 1.3.6.1.4.1.4874.2.2.19.1.1.158 | ScalarjuniRadiusClientRemoteCircuitIdDelimiter | read-write | current | The character use as for delimiting fields in the PPPoE Remote Circuit ID. The default value is '#'. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.159 | ScalarjuniRadiusClientIncludeL2cAccessLoopParametersInAccessReq | read-write | current | Enables/disables the inclusion of the l2c-access-loop-parameters (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.160 | ScalarjuniRadiusClientIncludeL2cDownStreamDataInAccessReq | read-write | current | Enables/disables the inclusion of the l2c-down-stream-data (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.161 | ScalarjuniRadiusClientIncludeL2cUpStreamDataInAccessReq | read-write | current | Enables/disables the inclusion of the l2c-up-stream-data (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.162 | ScalarjuniRadiusClientIncludeL2cDownStreamDataInAcctStart | read-write | current | Enables/disables the inclusion of the l2c-down-stream-data (VSA) in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.163 | ScalarjuniRadiusClientIncludeL2cUpStreamDataInAcctStart | read-write | current | Enables/disables the inclusion of the l2c-up-stream-data (VSA) in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.164 | ScalarjuniRadiusClientIncludeL2cDownStreamDataInAcctStop | read-write | current | Enables/disables the inclusion of the l2c-down-stream-data (VSA) in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.165 | ScalarjuniRadiusClientIncludeL2cUpStreamDataInAcctStop | read-write | current | Enables/disables the inclusion of the l2c-up-stream-data (VSA) in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.166 | ScalarjuniRadiusClientIncludeDslForumAttributesInAccessReq | read-write | current | Enables/disables the inclusion of the DSL Forum attributes (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.167 | ScalarjuniRadiusClientIncludeDslForumAttributesInAcctStart | read-write | current | Enables/disables the inclusion of the DSL Forum attributes (VSA) in the RADIUS Accounting-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.168 | ScalarjuniRadiusClientIncludeDslForumAttributesInAcctStop | read-write | current | Enables/disables the inclusion of the DSL Forum attributes (VSA) in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.169 | ScalarjuniRadiusClientIncludeL2cAccessLoopCircuitIdInAccessReq | read-write | current | Enables/disables the inclusion of l2cd-acc-loop-cir-id (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.170 | ScalarjuniRadiusClientIncludeL2cAccessAggrCircuitIdBinaryInAccessReq | read-write | current | Enables/disables the inclusion of l2cd-acc-aggr-cir-id-bin (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.171 | ScalarjuniRadiusClientIncludeL2cAccessAggrCircuitIdAsciiInAccessReq | read-write | current | Enables/disables the inclusion of l2cd-acc-aggr-cir-id-asc (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.172 | ScalarjuniRadiusClientIncludeL2cActualDataRateUstrInAccessReq | read-write | current | Enables/disables the inclusion of l2cd-act-data-rate-up (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.173 | ScalarjuniRadiusClientIncludeL2cActualDataRateDstrInAccessReq | read-write | current | Enables/disables the inclusion of l2cd-act-data-rate-dn (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.174 | ScalarjuniRadiusClientIncludeL2cMinimumDataRateUstrInAccessReq | read-write | current | Enables/disables the inclusion of l2cd-min-data-rate-up (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.175 | ScalarjuniRadiusClientIncludeL2cMinimumDataRateDstrInAccessReq | read-write | current | Enables/disables the inclusion of l2cd-in-data-rate-dn (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.176 | ScalarjuniRadiusClientIncludeL2cAttainDataRateUstrInAccessReq | read-write | current | Enables/disables the inclusion of l2cd-att-data-rate-up (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.177 | ScalarjuniRadiusClientIncludeL2cAttainDataRateDstrInAccessReq | read-write | current | Enables/disables the inclusion of l2cd-att-data-rate-dn (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.178 | ScalarjuniRadiusClientIncludeL2cMaximumDataRateUstrInAccessReq | read-write | current | Enables/disables the inclusion of l2cd-max-data-rate-up (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.179 | ScalarjuniRadiusClientIncludeL2cMaximumDataRateDstrInAccessReq | read-write | current | Enables/disables the inclusion of l2cd-max-data-rate-dn (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.180 | ScalarjuniRadiusClientIncludeL2cMinLowPowerDataRateUstrInAccessReq | read-write | current | Enables/disables the inclusion of l2cd-min-lp-data-rate-up (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.181 | ScalarjuniRadiusClientIncludeL2cMinLowPowerDataRateDstrInAccessReq | read-write | current | Enables/disables the inclusion of l2cd-min-lp-data-rate-dn (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.182 | ScalarjuniRadiusClientIncludeL2cMaxInterleavingDelayUstrInAccessReq | read-write | current | Enables/disables the inclusion of l2cd-max-interlv-delay-up (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.183 | ScalarjuniRadiusClientIncludeL2cActInterleavingDelayUstrInAccessReq | read-write | current | Enables/disables the inclusion of l2cd-act-interlv-delay-up (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.184 | ScalarjuniRadiusClientIncludeL2cMaxInterleavingDelayDstrInAccessReq | read-write | current | Enables/disables the inclusion of l2cd-max-interlv-delay-dn (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.185 | ScalarjuniRadiusClientIncludeL2cActInterleavingDelayDstrInAccessReq | read-write | current | Enables/disables the inclusion of l2cd-act-interlv-delay-dn (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.186 | ScalarjuniRadiusClientIncludeL2cDslLineStateInAccessReq | read-write | current | Enables/disables the inclusion of l2cd-dsl-line-state (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.187 | ScalarjuniRadiusClientIncludeL2cDslTypeInAccessReq | read-write | current | Enables/disables the inclusion of l2cd-dsl-type (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.188 | ScalarjuniRadiusClientIncludeL2cAccessLoopCircuitIdInAcctStart | read-write | current | Enables/disables the inclusion of l2cd-acc-loop-cir-id (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.189 | ScalarjuniRadiusClientIncludeL2cAccessAggrCircuitIdBinaryInAcctStart | read-write | current | Enables/disables the inclusion of l2cd-acc-aggr-cir-id-bin (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.190 | ScalarjuniRadiusClientIncludeL2cAccessAggrCircuitIdAsciiInAcctStart | read-write | current | Enables/disables the inclusion of l2cd-acc-aggr-cir-id-asc (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.191 | ScalarjuniRadiusClientIncludeL2cActualDataRateUstrInAcctStart | read-write | current | Enables/disables the inclusion of l2cd-act-data-rate-up (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.192 | ScalarjuniRadiusClientIncludeL2cActualDataRateDstrInAcctStart | read-write | current | Enables/disables the inclusion of l2cd-act-data-rate-dn (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.193 | ScalarjuniRadiusClientIncludeL2cMinimumDataRateUstrInAcctStart | read-write | current | Enables/disables the inclusion of l2cd-min-data-rate-up (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.194 | ScalarjuniRadiusClientIncludeL2cMinimumDataRateDstrInAcctStart | read-write | current | Enables/disables the inclusion of l2cd-in-data-rate-dn (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.195 | ScalarjuniRadiusClientIncludeL2cAttainDataRateUstrInAcctStart | read-write | current | Enables/disables the inclusion of l2cd-att-data-rate-up (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.196 | ScalarjuniRadiusClientIncludeL2cAttainDataRateDstrInAcctStart | read-write | current | Enables/disables the inclusion of l2cd-att-data-rate-dn (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.197 | ScalarjuniRadiusClientIncludeL2cMaximumDataRateUstrInAcctStart | read-write | current | Enables/disables the inclusion of l2cd-max-data-rate-up (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.198 | ScalarjuniRadiusClientIncludeL2cMaximumDataRateDstrInAcctStart | read-write | current | Enables/disables the inclusion of l2cd-max-data-rate-dn (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.199 | ScalarjuniRadiusClientIncludeL2cMinLowPowerDataRateUstrInAcctStart | read-write | current | Enables/disables the inclusion of l2cd-min-lp-data-rate-up (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.200 | ScalarjuniRadiusClientIncludeL2cMinLowPowerDataRateDstrInAcctStart | read-write | current | Enables/disables the inclusion of l2cd-min-lp-data-rate-dn (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.201 | ScalarjuniRadiusClientIncludeL2cMaxInterleavingDelayUstrInAcctStart | read-write | current | Enables/disables the inclusion of l2cd-max-interlv-delay-up (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.202 | ScalarjuniRadiusClientIncludeL2cActInterleavingDelayUstrInAcctStart | read-write | current | Enables/disables the inclusion of l2cd-act-interlv-delay-up (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.203 | ScalarjuniRadiusClientIncludeL2cMaxInterleavingDelayDstrInAcctStart | read-write | current | Enables/disables the inclusion of l2cd-max-interlv-delay-dn (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.204 | ScalarjuniRadiusClientIncludeL2cActInterleavingDelayDstrInAcctStart | read-write | current | Enables/disables the inclusion of l2cd-act-interlv-delay-dn (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.205 | ScalarjuniRadiusClientIncludeL2cDslLineStateInAcctStart | read-write | current | Enables/disables the inclusion of l2cd-dsl-line-state (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.206 | ScalarjuniRadiusClientIncludeL2cDslTypeInAcctStart | read-write | current | Enables/disables the inclusion of l2cd-dsl-type (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.207 | ScalarjuniRadiusClientIncludeL2cAccessLoopCircuitIdInAcctStop | read-write | current | Enables/disables the inclusion of l2cd-acc-loop-cir-id (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.208 | ScalarjuniRadiusClientIncludeL2cAccessAggrCircuitIdBinaryInAcctStop | read-write | current | Enables/disables the inclusion of l2cd-acc-aggr-cir-id-bin (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.209 | ScalarjuniRadiusClientIncludeL2cAccessAggrCircuitIdAsciiInAcctStop | read-write | current | Enables/disables the inclusion of l2cd-acc-aggr-cir-id-asc (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.210 | ScalarjuniRadiusClientIncludeL2cActualDataRateUstrInAcctStop | read-write | current | Enables/disables the inclusion of l2cd-act-data-rate-up (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.211 | ScalarjuniRadiusClientIncludeL2cActualDataRateDstrInAcctStop | read-write | current | Enables/disables the inclusion of l2cd-act-data-rate-dn (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.212 | ScalarjuniRadiusClientIncludeL2cMinimumDataRateUstrInAcctStop | read-write | current | Enables/disables the inclusion of l2cd-min-data-rate-up (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.213 | ScalarjuniRadiusClientIncludeL2cMinimumDataRateDstrInAcctStop | read-write | current | Enables/disables the inclusion of l2cd-in-data-rate-dn (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.214 | ScalarjuniRadiusClientIncludeL2cAttainDataRateUstrInAcctStop | read-write | current | Enables/disables the inclusion of l2cd-att-data-rate-up (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.215 | ScalarjuniRadiusClientIncludeL2cAttainDataRateDstrInAcctStop | read-write | current | Enables/disables the inclusion of l2cd-att-data-rate-dn (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.216 | ScalarjuniRadiusClientIncludeL2cMaximumDataRateUstrInAcctStop | read-write | current | Enables/disables the inclusion of l2cd-max-data-rate-up (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.217 | ScalarjuniRadiusClientIncludeL2cMaximumDataRateDstrInAcctStop | read-write | current | Enables/disables the inclusion of l2cd-max-data-rate-dn (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.218 | ScalarjuniRadiusClientIncludeL2cMinLowPowerDataRateUstrInAcctStop | read-write | current | Enables/disables the inclusion of l2cd-min-lp-data-rate-up (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.219 | ScalarjuniRadiusClientIncludeL2cMinLowPowerDataRateDstrInAcctStop | read-write | current | Enables/disables the inclusion of l2cd-min-lp-data-rate-dn (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.220 | ScalarjuniRadiusClientIncludeL2cMaxInterleavingDelayUstrInAcctStop | read-write | current | Enables/disables the inclusion of l2cd-max-interlv-delay-up (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.221 | ScalarjuniRadiusClientIncludeL2cActInterleavingDelayUstrInAcctStop | read-write | current | Enables/disables the inclusion of l2cd-act-interlv-delay-up (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.222 | ScalarjuniRadiusClientIncludeL2cMaxInterleavingDelayDstrInAcctStop | read-write | current | Enables/disables the inclusion of l2cd-max-interlv-delay-dn (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.223 | ScalarjuniRadiusClientIncludeL2cActInterleavingDelayDstrInAcctStop | read-write | current | Enables/disables the inclusion of l2cd-act-interlv-delay-dn (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.224 | ScalarjuniRadiusClientIncludeL2cDslLineStateInAcctStop | read-write | current | Enables/disables the inclusion of l2cd-dsl-line-state (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.225 | ScalarjuniRadiusClientIncludeL2cDslTypeInAcctStop | read-write | current | Enables/disables the inclusion of l2cd-dsl-type (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.226 | ScalarjuniRadiusClientIncludeInterfaceIdInAcctStart | read-write | current | Enables/disables the inclusion of framed-interface-id (96) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.227 | ScalarjuniRadiusClientIncludeIpv6PrefixInAcctStart | read-write | current | Enables/disables the inclusion of framed-ipv6-prefix (97) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.228 | ScalarjuniRadiusClientIncludeInterfaceIdInAcctStop | read-write | current | Enables/disables the inclusion of framed-interface-id (96) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.229 | ScalarjuniRadiusClientIncludeIpAddrInAcctStop | read-write | current | Enables/disables the inclusion of framed-ip-address (8) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.230 | ScalarjuniRadiusClientIncludeIpv6PrefixInAcctStop | read-write | current | Enables/disables the inclusion of framed-ipv6-prefix (97) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.231 | ScalarjuniRadiusClientIncludeDownStreamCalculatedQosRateInAccessReq | read-write | current | Enables/disables the inclusion of downstream-calculated-qos-rate (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.232 | ScalarjuniRadiusClientIncludeUpStreamCalculatedQosRateInAccessReq | read-write | current | Enables/disables the inclusion of upstream-calculated-qos-rate (VSA) in the RADIUS Access-Request packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.233 | ScalarjuniRadiusClientIncludeDownStreamCalculatedQosRateInAcctStart | read-write | current | Enables/disables the inclusion of downstream-calculated-qos-rate (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.234 | ScalarjuniRadiusClientIncludeUpStreamCalculatedQosRateInAcctStart | read-write | current | Enables/disables the inclusion of upstream-calculated-qos-rate (VSA) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.235 | ScalarjuniRadiusClientIncludeDownStreamCalculatedQosRateInAcctStop | read-write | current | Enables/disables the inclusion of downstream-calculated-qos-rate (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.236 | ScalarjuniRadiusClientIncludeUpStreamCalculatedQosRateInAcctStop | read-write | current | Enables/disables the inclusion of upstream-calculated-qos-rate (VSA) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.237 | ScalarjuniRadiusClientIgnorePppoeMaxSession | read-write | current | Enables/disables ignoring the PPPoE Max Session (vsa) attribute in the RADIUS Access-Accept packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.238 | ScalarjuniRadiusClientIncludeIpv6AccountingInAcctStop | read-write | current | Enables/disables the inclusion of the IPv6 Accounting (VSA) attributes in the RADIUS Accounting-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.239 | ScalarjuniRadiusClientIncludeDelegatedIpv6PrefixInAcctStart | read-write | current | Enables/disables the inclusion of delegated-ipv6-prefix (123) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.240 | ScalarjuniRadiusClientIncludeDelegatedIpv6PrefixInAcctStop | read-write | current | Enables/disables the inclusion of delegated-ipv6-prefix (123) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.241 | ScalarjuniRadiusClientIncludeFramedIpv6PoolInAcctStart | read-write | current | Enables/disables the inclusion of framed-ipv6-pool (100) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.242 | ScalarjuniRadiusClientIncludeFramedIpv6PoolInAcctStop | read-write | current | Enables/disables the inclusion of framed-ipv6-pool (100) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.243 | ScalarjuniRadiusClientIncludeFramedIpv6RouteInAcctStart | read-write | current | Enables/disables the inclusion of framed-ipv6-route (99) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.244 | ScalarjuniRadiusClientIncludeFramedIpv6RouteInAcctStop | read-write | current | Enables/disables the inclusion of framed-ipv6-route (99) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.245 | ScalarjuniRadiusClientIncludeIpv6LocalInterfaceInAcctStart | read-write | current | Enables/disables the inclusion of ipv6-local-interface (vsa) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.246 | ScalarjuniRadiusClientIncludeIpv6LocalInterfaceInAcctStop | read-write | current | Enables/disables the inclusion of ipv6-local-interface (vsa) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.247 | ScalarjuniRadiusClientIncludeIpv6NdRaPrefixInAcctStart | read-write | current | Enables/disables the inclusion of ipv6-nd-ra-prefix (vsa) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.248 | ScalarjuniRadiusClientIncludeIpv6NdRaPrefixInAcctStop | read-write | current | Enables/disables the inclusion of ipv6-nd-ra-prefix (vsa) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.249 | ScalarjuniRadiusClientIncludeIpv6PrimaryDnsInAcctStart | read-write | current | Enables/disables the inclusion of ipv6-primary-dns (vsa) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.250 | ScalarjuniRadiusClientIncludeIpv6PrimaryDnsInAcctStop | read-write | current | Enables/disables the inclusion of ipv6-primary-dns (vsa) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.251 | ScalarjuniRadiusClientIncludeIpv6SecondaryDnsInAcctStart | read-write | current | Enables/disables the inclusion of ipv6-secondary-dns (vsa) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.252 | ScalarjuniRadiusClientIncludeIpv6SecondaryDnsInAcctStop | read-write | current | Enables/disables the inclusion of ipv6-secondary-dns (vsa) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.253 | ScalarjuniRadiusClientIncludeIpv6VirtualRouterInAcctStart | read-write | current | Enables/disables the inclusion of ipv6-virtual-router (vsa) in the RADIUS Acct-Start packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.1.254 | ScalarjuniRadiusClientIncludeIpv6VirtualRouterInAcctStop | read-write | current | Enables/disables the inclusion of ipv6-virtual-router (vsa) in the RADIUS Acct-Stop packet. |
| 1.3.6.1.4.1.4874.2.2.19.1.2 | NodejuniRadiusAuthClient | |||
| 1.3.6.1.4.1.4874.2.2.19.1.2.1 | ScalarjuniRadiusAuthClientInvalidServerAddresses | read-only | current | The number of RADIUS Access-Response packets received from unknown addresses. |
| 1.3.6.1.4.1.4874.2.2.19.1.2.2 | TablejuniRadiusAuthClientServerTable | not-accessible | current | The (conceptual) table listing the RADIUS authentication servers with which the client shares a secret. |
| 1.3.6.1.4.1.4874.2.2.19.1.2.2.1 | RowjuniRadiusAuthClientServerEntry | not-accessible | current | An entry (conceptual row) representing a RADIUS authentication server with which the client shares a secret. |
| 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.1 | ColumnjuniRadiusAuthClientServerAddress | not-accessible | current | The IP address of the RADIUS authentication server referred to in this table entry. A value of 0.0.0.0 indicates this entry is not in use. |
| 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.2 | ColumnjuniRadiusAuthClientServerPortNumber | read-only | current | The UDP port the client is using to send requests to this server. |
| 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.3 | ColumnjuniRadiusAuthClientRoundTripTime | read-only | current | The time interval (in hundredths of seconds) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS auth… |
| 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.4 | ColumnjuniRadiusAuthClientAccessRequests | read-only | current | The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.5 | ColumnjuniRadiusAuthClientAccessRetransmissions | read-only | current | The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server. |
| 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.6 | ColumnjuniRadiusAuthClientAccessAccepts | read-only | current | The number of RADIUS Access-Accept packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.7 | ColumnjuniRadiusAuthClientAccessRejects | read-only | current | The number of RADIUS Access-Reject packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.8 | ColumnjuniRadiusAuthClientAccessChallenges | read-only | current | The number of RADIUS Access-Challenge packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.9 | ColumnjuniRadiusAuthClientMalformedAccessResponses | read-only | current | The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators … |
| 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.10 | ColumnjuniRadiusAuthClientBadAuthenticators | read-only | current | The number of RADIUS Access-Response packets containing invalid authenticators or signature attributes received from this server. |
| 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.11 | ColumnjuniRadiusAuthClientPendingRequests | read-only | current | The number of RADIUS Access-Request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an A… |
| 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.12 | ColumnjuniRadiusAuthClientTimeouts | read-only | current | The number of authentication timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry … |
| 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.13 | ColumnjuniRadiusAuthClientUnknownTypes | read-only | current | The number of RADIUS packets of unknown type which were received from this server on the authentication port. |
| 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.14 | ColumnjuniRadiusAuthClientPacketsDropped | read-only | current | The number of RADIUS packets of which were received from this server on the authentication port and dropped for some other reason. |
| 1.3.6.1.4.1.4874.2.2.19.1.2.3 | TablejuniRadiusAuthClientCfgServerTable | not-accessible | current | The (conceptual) table listing the RADIUS authentication servers with which the client shares a secret. |
| 1.3.6.1.4.1.4874.2.2.19.1.2.3.1 | RowjuniRadiusAuthClientCfgServerEntry | not-accessible | current | An entry (conceptual row) representing a RADIUS authentication server with which the client shares a secret. |
| 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.1 | ColumnjuniRadiusAuthClientCfgServerAddress | not-accessible | current | The IP address of the RADIUS authentication server referred to in this table entry. |
| 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.2 | ColumnjuniRadiusAuthClientCfgServerPortNumber | read-create | current | The UDP port the client is using to send requests to this server. |
| 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.3 | ColumnjuniRadiusAuthClientCfgKey | read-create | current | The secret (RADIUS authenticator) used by the client during exchanges with this authentication server. The default is a zero-length string, indicating no authe… |
| 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.4 | ColumnjuniRadiusAuthClientCfgTimeoutInterval | read-create | current | The interval between retransmissions of a request to this authentication server. |
| 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.5 | ColumnjuniRadiusAuthClientCfgRetries | read-create | current | The maximum number of times to resend a request to this authentication server (in addition to the original request), before resorting to the server specified i… |
| 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.6 | ColumnjuniRadiusAuthClientCfgMaxPendingRequests | read-create | current | The maximum number of outstanding requests this server can support. |
| 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.7 | ColumnjuniRadiusAuthClientCfgRowStatus | read-create | current | Supports 'createAndGo' and 'destroy' only. |
| 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.8 | ColumnjuniRadiusAuthClientCfgPrecedence | read-only | current | Relative precedence of this server with respect to other servers configured in this table. Lower values correspond to higher precedence. Precedence is assigned… |
| 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.9 | ColumnjuniRadiusAuthClientCfgDeadTime | read-create | current | The period of time, in minutes, to ignore this server after a request to the server times out (thereby avoiding additional request timeouts for this period, if… |
| 1.3.6.1.4.1.4874.2.2.19.1.3 | NodejuniRadiusAcctClient | |||
| 1.3.6.1.4.1.4874.2.2.19.1.3.1 | ScalarjuniRadiusAcctClientInvalidServerAddresses | read-only | current | The number of RADIUS Accounting-Response packets received from unknown addresses. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2 | TablejuniRadiusAcctClientServerTable | not-accessible | current | The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1 | RowjuniRadiusAcctClientServerEntry | not-accessible | current | An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.1 | ColumnjuniRadiusAcctClientServerAddress | not-accessible | current | The IP address of the RADIUS accounting server referred to in this table entry. A value of 0.0.0.0 indicates this entry is not in use. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.2 | ColumnjuniRadiusAcctClientServerPortNumber | read-only | current | The UDP port the client is using to send requests to this server. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.3 | ColumnjuniRadiusAcctClientRoundTripTime | read-only | current | The time interval between the most recent Accounting-Response and the Accounting-Request that matched it from this RADIUS accounting server. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.4 | ColumnjuniRadiusAcctClientRequests | read-only | current | The number of RADIUS Accounting-Request packets sent. This does not include retransmissions. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.5 | ColumnjuniRadiusAcctClientRetransmissions | read-only | current | The number of RADIUS Accounting-Request packets retransmitted to this RADIUS accounting server. Retransmissions include retries where the Identifier and Acct-D… |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.6 | ColumnjuniRadiusAcctClientResponses | read-only | current | The number of RADIUS packets received on the accounting port from this server. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.7 | ColumnjuniRadiusAcctClientMalformedResponses | read-only | current | The number of malformed RADIUS Accounting-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticat… |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.8 | ColumnjuniRadiusAcctClientBadAuthenticators | read-only | current | The number of RADIUS Accounting-Response packets which contained invalid authenticators received from this server. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.9 | ColumnjuniRadiusAcctClientPendingRequests | read-only | current | The number of RADIUS Accounting-Request packets sent to this server that have not yet timed out or received a response. This variable is incremented when an Ac… |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.10 | ColumnjuniRadiusAcctClientTimeouts | read-only | current | The number of accounting timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry to t… |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.11 | ColumnjuniRadiusAcctClientUnknownTypes | read-only | current | The number of RADIUS packets of unknown type which were received from this server on the accounting port. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.12 | ColumnjuniRadiusAcctClientPacketsDropped | read-only | current | The number of RADIUS packets which were received from this server on the accounting port and dropped for some other reason. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.13 | ColumnjuniRadiusAcctClientStartRequests | read-only | current | The number of RADIUS Accounting-Start request packets sent. This does not include retransmissions. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.14 | ColumnjuniRadiusAcctClientInterimRequests | read-only | current | The number of RADIUS Accounting-Interim request packets sent. This does not include retransmissions. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.15 | ColumnjuniRadiusAcctClientStopRequests | read-only | current | The number of RADIUS Accounting-Stop request packets sent. This does not include retransmissions. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.16 | ColumnjuniRadiusAcctClientStartResponses | read-only | current | The number of RADIUS accounting-start response packets received on the accounting port from this server. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.17 | ColumnjuniRadiusAcctClientInterimResponses | read-only | current | The number of RADIUS accounting-interim response packets received on the accounting port from this server. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.18 | ColumnjuniRadiusAcctClientStopResponses | read-only | current | The number of RADIUS accounting-stop response packets received on the accounting port from this server. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.19 | ColumnjuniRadiusAcctClientRejectRequests | read-only | current | The number of RADIUS accounting-reject packets sent on the accounting port from this server. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.20 | ColumnjuniRadiusAcctClientRejectResponses | read-only | current | The number of RADIUS accounting-reject response packets received on the accounting port from this server. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.3 | TablejuniRadiusAcctClientCfgServerTable | not-accessible | current | The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.3.1 | RowjuniRadiusAcctClientCfgServerEntry | not-accessible | current | An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.1 | ColumnjuniRadiusAcctClientCfgServerAddress | not-accessible | current | The IP address of the RADIUS accounting server referred to in this table entry. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.2 | ColumnjuniRadiusAcctClientCfgServerPortNumber | read-create | current | The UDP port the client is using to send requests to this server. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.3 | ColumnjuniRadiusAcctClientCfgKey | read-create | current | The secret (RADIUS authenticator) used by the client during exchanges with this accounting server. The default is a zero-length string, indicating no authentic… |
| 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.4 | ColumnjuniRadiusAcctClientCfgTimeoutInterval | read-create | current | The interval between retransmissions of a request to this accounting server. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.5 | ColumnjuniRadiusAcctClientCfgRetries | read-create | current | The maximum number of times to resend a request to this accounting server (in addition to the original request), before resorting to the server specified in th… |
| 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.6 | ColumnjuniRadiusAcctClientCfgMaxPendingRequests | read-create | current | The maximum number of outstanding requests this server can support. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.7 | ColumnjuniRadiusAcctClientCfgRowStatus | read-create | current | Supports 'createAndGo' and 'destroy' only. |
| 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.8 | ColumnjuniRadiusAcctClientCfgPrecedence | read-only | current | Relative precedence of this server with respect to other servers configured in this table. Lower values correspond to higher precedence. Precedence is assigned… |
| 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.9 | ColumnjuniRadiusAcctClientCfgDeadTime | read-create | current | The period of time, in minutes, to ignore this server after a request to the server times out (thereby avoiding additional request timeouts for this period, if… |
| 1.3.6.1.4.1.4874.2.2.19.2 | NodejuniRadiusClientMIBConformance | |||
| 1.3.6.1.4.1.4874.2.2.19.2.1 | NodejuniRadiusClientMIBCompliances | |||
| 1.3.6.1.4.1.4874.2.2.19.2.1.1 | CompliancejuniRadiusAuthClientCompliance | obsolete | Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolet… | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.2 | CompliancejuniRadiusAcctClientCompliance | obsolete | Obsolete compliance statement for accounting clients implementing the Juniper RADIUS Client MIB accounting functionality. This statement became obsolete when t… | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.3 | CompliancejuniRadiusAuthClientCompliance2 | obsolete | Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolet… | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.4 | CompliancejuniRadiusAcctClientCompliance2 | obsolete | Obsolete compliance statement for accounting clients implementing the Juniper RADIUS Client MIB accounting functionality. This statement became obsolete when n… | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.5 | CompliancejuniRadiusClientCompliance | obsolete | Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolet… | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.6 | CompliancejuniRadiusClientCompliance2 | obsolete | Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolet… | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.7 | CompliancejuniRadiusClientCompliance3 | obsolete | Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolet… | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.8 | CompliancejuniRadiusClientCompliance4 | obsolete | Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolet… | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.9 | CompliancejuniRadiusClientCompliance5 | obsolete | Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolet… | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.10 | CompliancejuniRadiusClientCompliance6 | obsolete | Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolet… | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.11 | CompliancejuniRadiusClientCompliance7 | obsolete | Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolet… | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.12 | CompliancejuniRadiusClientCompliance8 | obsolete | Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolet… | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.13 | CompliancejuniRadiusClientCompliance9 | obsolete | Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolet… | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.14 | CompliancejuniRadiusClientCompliance10 | obsolete | Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolet… | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.15 | CompliancejuniRadiusClientCompliance11 | obsolete | Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.16 | CompliancejuniRadiusClientCompliance12 | obsolete | Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.17 | CompliancejuniRadiusClientCompliance13 | obsolete | Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.18 | CompliancejuniRadiusClientCompliance14 | obsolete | The compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.19 | CompliancejuniRadiusClientCompliance15 | obsolete | Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.20 | CompliancejuniRadiusClientCompliance16 | obsolete | The compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.21 | CompliancejuniRadiusClientCompliance17 | obsolete | The compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. | |
| 1.3.6.1.4.1.4874.2.2.19.2.1.22 | CompliancejuniRadiusClientCompliance18 | current | The compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2 | NodejuniRadiusClientMIBGroups | |||
| 1.3.6.1.4.1.4874.2.2.19.2.2.1 | GroupjuniRadiusGeneralClientGroup | obsolete | Obsolete basic collection of objects providing management of RADIUS Clients. This group became obsolete when juniRadiusClientSourceAddress was added. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.2 | GroupjuniRadiusAuthClientGroup | obsolete | Obsolete collection of objects providing management of RADIUS Authentication Clients. This group became obsolete when notification objects for an unavailable a… | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.3 | GroupjuniRadiusAcctClientGroup | obsolete | Obsolete collection of objects providing management of RADIUS Accounting Clients. This group became obsolete when notification objects for an unavailable accou… | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.4 | GroupjuniRadiusGeneralClientGroup2 | obsolete | Obsolete basic collection of objects providing management of RADIUS Clients. This group became obsolete when new objects were added. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.5 | GroupjuniRadiusBasicClientGroup | obsolete | Obsolete collection of objects providing basic management of RADIUS Clients. This group became obsolete when the juniRadiusClientRollover object was added. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.6 | GroupjuniRadiusBrasClientGroup | obsolete | Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when new objects were added. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.7 | GroupjuniRadiusTunnelClientGroup | current | An object providing management of tunneling functions for RADIUS Clients. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.8 | GroupjuniRadiusBrasClientGroup2 | obsolete | Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when the juniRadiusClientCallingS… | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.9 | GroupjuniRadiusBasicClientGroup2 | current | A collection of objects providing basic management of RADIUS Clients. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.10 | GroupjuniRadiusBrasClientGroup3 | obsolete | Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when the juniRadiusClientNasIpAdd… | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.11 | GroupjuniRadiusBrasClientGroup4 | obsolete | Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when objects were added to indica… | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.12 | GroupjuniRadiusBrasClientGroup5 | obsolete | Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when objects to ignore attributes… | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.13 | GroupjuniRadiusAuthClientGroup2 | obsolete | Obsolete collection of objects providing management of RADIUS Authentication Clients. This group became obsolete when authentication server available notificat… | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.14 | GroupjuniRadiusAcctClientGroup2 | obsolete | Obsolete collection of objects providing management of RADIUS Accounting Clients. This group became obsolete when detailed accounting statistics and accounting… | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.15 | GroupjuniRadiusAuthNotificationGroup | obsolete | Obsolete collection of management notifications for RADUIS authentication events. This group became obsolete when authentication server available notification … | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.16 | GroupjuniRadiusAcctNotificationGroup | obsolete | Obsolete collection of management notifications for RADUIS accounting events. This group became obsolete when accounting server available notification was adde… | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.17 | GroupjuniRadiusBrasClientGroup6 | obsolete | Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when objects for PPPoE Nas-Port f… | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.18 | GroupjuniRadiusAuthClientGroup3 | current | A collection of objects providing management of RADIUS Authentication Clients. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.19 | GroupjuniRadiusAcctClientGroup3 | obsolete | Obsolete collection of objects providing management of RADIUS Accounting Clients. This group became obsolete when reject counters were added. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.20 | GroupjuniRadiusAuthNotificationGroup2 | current | Management notifications for RADUIS authentication events. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.21 | GroupjuniRadiusAcctNotificationGroup2 | current | Management notifications for RADUIS accounting events. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.22 | GroupjuniRadiusBrasClientGroup7 | obsolete | Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when an object for VLAN Nas-Port … | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.23 | GroupjuniRadiusAcctClientGroup4 | current | A collection of objects providing management of RADIUS Accounting Clients. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.24 | GroupjuniRadiusBrasClientGroup8 | obsolete | Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when new objects were added to in… | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.25 | GroupjuniRadiusBrasClientGroup9 | obsolete | A collection of objects providing management of general B-RAS functions for RADIUS Clients. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.26 | GroupjuniRadiusBrasClientGroup10 | obsolete | A collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when new objects were added to enable/di… | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.27 | GroupjuniRadiusBrasClientGroup11 | obsolete | Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.28 | GroupjuniRadiusBrasClientGroup12 | obsolete | A collection of objects providing management of general B-RAS functions for RADIUS Clients. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.29 | GroupjuniRadiusBrasClientGroup13 | obsolete | A collection of objects providing management of general B-RAS functions for RADIUS Clients. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.30 | GroupjuniRadiusBrasClientGroup14 | obsolete | A collection of objects providing management of general B-RAS functions for RADIUS Clients. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.31 | GroupjuniRadiusBrasClientGroup15 | obsolete | A collection of objects providing management of general B-RAS functions for RADIUS Clients. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.32 | GroupjuniRadiusBrasClientGroup16 | obsolete | A collection of objects providing management of general B-RAS functions for RADIUS Clients. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.33 | GroupjuniRadiusBrasClientGroup17 | obsolete | A collection of objects providing management of general B-RAS functions for RADIUS Clients. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.34 | GroupjuniRadiusBrasClientGroup18 | obsolete | A collection of objects providing management of general B-RAS functions for RADIUS Clients. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.35 | GroupjuniRadiusBrasClientGroup19 | obsolete | A collection of objects providing management of general B-RAS functions for RADIUS Clients. | |
| 1.3.6.1.4.1.4874.2.2.19.2.2.36 | GroupjuniRadiusBrasClientGroup20 | current | A collection of objects providing management of general B-RAS functions for RADIUS Clients. | |
| 1.3.6.1.4.1.4874.2.2.19.3 | NodejuniRadiusClientTraps | |||
| 1.3.6.1.4.1.4874.2.2.19.3.0 | NodejuniRadiusClientTrapPrefix | |||
| 1.3.6.1.4.1.4874.2.2.19.3.0.1 | NotificationjuniRadiusAuthClientServerUnavailable | current | This trap will be generated when the requested authentication server is not available. | |
| 1.3.6.1.4.1.4874.2.2.19.3.0.2 | NotificationjuniRadiusAuthClientNoServerAvailable | current | This trap will be generated when all of the requested servers were not available. | |
| 1.3.6.1.4.1.4874.2.2.19.3.0.3 | NotificationjuniRadiusAcctClientServerUnavailable | current | This trap will be generated when the requested accounting server is not available. | |
| 1.3.6.1.4.1.4874.2.2.19.3.0.4 | NotificationjuniRadiusAcctClientNoServerAvailable | current | This trap will be generated when all of the requested servers were not available. | |
| 1.3.6.1.4.1.4874.2.2.19.3.0.5 | NotificationjuniRadiusAuthClientServerAvailable | current | This trap will be generated when the requested authentication server becomes available again after a period of time. | |
| 1.3.6.1.4.1.4874.2.2.19.3.0.6 | NotificationjuniRadiusAcctClientServerAvailable | current | This trap will be generated when the requested accounting server becomes available again after a period of time. | |
| 1.3.6.1.4.1.4874.2.2.19.4 | NodejuniRadiusClientTrapControl | |||
| 1.3.6.1.4.1.4874.2.2.19.4.1 | ScalarjuniRadiusAuthClientUnavailableServer | accessible-for-notify | current | The IP address of the RADIUS client's former authentication server that is no longer available. The value of this object is equivalent to the prior value of ju… |
| 1.3.6.1.4.1.4874.2.2.19.4.2 | ScalarjuniRadiusAuthClientNextAvailableServer | accessible-for-notify | current | The next available RADIUS authentication server, replacing the one that is unavailable. The value of this object is equivalent to the current value of juniRadi… |
| 1.3.6.1.4.1.4874.2.2.19.4.3 | ScalarjuniRadiusAcctClientUnavailableServer | accessible-for-notify | current | The IP address of the RADIUS client's former accounting server that is no longer available. The value of this object is equivalent to the prior value of juniRa… |
| 1.3.6.1.4.1.4874.2.2.19.4.4 | ScalarjuniRadiusAcctClientNextAvailableServer | accessible-for-notify | current | The next available RADIUS accounting server, replacing the one that is unavailable. The value of this object is equivalent to the current value of juniRadiusAc… |
| 1.3.6.1.4.1.4874.2.2.19.4.5 | ScalarjuniRadiusAuthClientAvailableServer | accessible-for-notify | current | The re-available RADIUS authentication server after a period of time called dead-time. The value of this object is equivalent to the current value of juniRadiu… |
| 1.3.6.1.4.1.4874.2.2.19.4.6 | ScalarjuniRadiusAcctClientAvailableServer | accessible-for-notify | current | The re-available RADIUS accounting server after a period of time called dead-time. The value of this object is equivalent to the current value of juniRadiusAcc… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| JuniRadiusClientRemoterCircuitIdFormatComponents | INTEGER { agentCircuitId(1), agentRemoteId(2), nasIdentifier(3), dsl-format-1(4) } | current | The set of configurable choices of PPPoE Remote Circtuit Id. The maximum enumerated type will never be greater than 255, 'agentCircuitId' denotes the suboption 1 and 'remoteCircuitId' denotes the suboption 2 of option 8… |