Juniper-System-Clock-MIB
125 objects
The System Clock and Network Time Protocol (NTP) MIB for the Juniper Networks enterprise. The System Clock section of the MIB allows setting the system clock time, date and timezone. All definitions are based on the Gregorian calendar. The NTP portion of the MIB provides management for the local NTP client/server, which adheres to RFC 1305, the 'Network Time Protocol (Version 3) Specification, Implementation and Analysis'.
Imported Objects
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniEnable |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.56 | IdentityjuniSysClockMIB | The System Clock and Network Time Protocol (NTP) MIB for the Juniper Networks enterprise. The System Clock section of the MIB allows setting the system clock t… | ||
| 1.3.6.1.4.1.4874.2.2.56.1 | NodejuniSysClockObjects | |||
| 1.3.6.1.4.1.4874.2.2.56.1.1 | NodejuniSysClockTime | |||
| 1.3.6.1.4.1.4874.2.2.56.1.1.1 | ScalarjuniSysClockDateAndTime | read-write | current | This object is used to manage the system clock time, date and timezone. If the Network Time Protocol (NTP) is enabled, attempts to set this object will result … |
| 1.3.6.1.4.1.4874.2.2.56.1.1.2 | ScalarjuniSysClockTimeZoneName | read-write | current | Name of the timezone. Timezone name take effects only with its offset set along with it. |
| 1.3.6.1.4.1.4874.2.2.56.1.2 | NodejuniSysClockDst | |||
| 1.3.6.1.4.1.4874.2.2.56.1.2.1 | ScalarjuniSysClockDstName | read-write | current | The name of the daylight savings time (DST) zone. Setting any standard US DST timezone name with recurrent mode will result in turning on corresponding DST rec… |
| 1.3.6.1.4.1.4874.2.2.56.1.2.2 | ScalarjuniSysClockDstOffset | read-write | current | The offset, in minutes, from the base timezone for the DST. |
| 1.3.6.1.4.1.4874.2.2.56.1.2.3 | ScalarjuniSysClockDstStatus | read-write | current | The state of DST. With each state, only corresponding objects can be set. When the state is off(0), set values will be ignored. |
| 1.3.6.1.4.1.4874.2.2.56.1.2.4 | ScalarjuniSysClockDstAbsoluteStartTime | read-write | current | This object represents the start time for absolute DST. Only the year, month, day, hour and minutes fields of the object are used. The other fields will be ign… |
| 1.3.6.1.4.1.4874.2.2.56.1.2.5 | ScalarjuniSysClockDstAbsoluteStopTime | read-write | current | This object represents the stop time for absolute DST. Only the year, month, day, hour and minutes fields of the object are used. The other fields will be igno… |
| 1.3.6.1.4.1.4874.2.2.56.1.2.6 | ScalarjuniSysClockDstRecurStartMonth | read-write | current | The start month for DST recurrence. The default value is based on the 2007 law for the USA. |
| 1.3.6.1.4.1.4874.2.2.56.1.2.7 | ScalarjuniSysClockDstRecurStartWeek | read-write | current | The start week of the month for DST recurrence. The default value is based on the 2007 law for the USA. |
| 1.3.6.1.4.1.4874.2.2.56.1.2.8 | ScalarjuniSysClockDstRecurStartDay | read-write | current | The start day of the week for DST recurrence. The default value is based on the 2007 law for the USA. |
| 1.3.6.1.4.1.4874.2.2.56.1.2.9 | ScalarjuniSysClockDstRecurStartHour | read-write | current | The start hour for DST recurrence. The default value is based on the 2007 law for the USA. |
| 1.3.6.1.4.1.4874.2.2.56.1.2.10 | ScalarjuniSysClockDstRecurStartMinute | read-write | current | The start minute for DST recurrence. The default value is based on the 2007 law for the USA. |
| 1.3.6.1.4.1.4874.2.2.56.1.2.11 | ScalarjuniSysClockDstRecurStopMonth | read-write | current | The stop month for DST recurrence. The default value is based on the 2007 law for the USA. |
| 1.3.6.1.4.1.4874.2.2.56.1.2.12 | ScalarjuniSysClockDstRecurStopWeek | read-write | current | The stop week of the month for DST recurrence. The default value is based on the 2007 law for the USA. |
| 1.3.6.1.4.1.4874.2.2.56.1.2.13 | ScalarjuniSysClockDstRecurStopDay | read-write | current | The stop day of the week for DST recurrence. The default value is based on the 2007 law for the USA. |
| 1.3.6.1.4.1.4874.2.2.56.1.2.14 | ScalarjuniSysClockDstRecurStopHour | read-write | current | The stop hour for DST recurrence. The default value is based on the 2007 law for the USA. |
| 1.3.6.1.4.1.4874.2.2.56.1.2.15 | ScalarjuniSysClockDstRecurStopMinute | read-write | current | The stop minutes for DST recurrence. The default value is based on the 2007 law for the USA. |
| 1.3.6.1.4.1.4874.2.2.56.2 | NodejuniNtpObjects | |||
| 1.3.6.1.4.1.4874.2.2.56.2.0 | NodejuniNtpTraps | |||
| 1.3.6.1.4.1.4874.2.2.56.2.0.1 | NotificationjuniNtpFrequencyCalibrationStart | current | This trap will be generated at the start of frequency synchronization. | |
| 1.3.6.1.4.1.4874.2.2.56.2.0.2 | NotificationjuniNtpFrequencyCalibrationEnd | current | This trap will be generated when frequency synchronization completes successfully. | |
| 1.3.6.1.4.1.4874.2.2.56.2.0.3 | NotificationjuniNtpTimeSynUp | current | This trap indicates that some kind of time synchronization has started. This trap will be generated at the start of time synchronization with the configured ti… | |
| 1.3.6.1.4.1.4874.2.2.56.2.0.4 | NotificationjuniNtpTimeSynDown | current | This trap will be generated when the NTP client is not able to time synchronize with any of the configured time servers for any reasons when NTP is enabled on … | |
| 1.3.6.1.4.1.4874.2.2.56.2.0.5 | NotificationjuniNtpTimeServerSynUp | current | This trap will be generated to report the time synchronization status of each configured time server on the router when it starts time synchronization with the… | |
| 1.3.6.1.4.1.4874.2.2.56.2.0.6 | NotificationjuniNtpTimeServerSynDown | current | This trap will be generated to report the time synchronization status of each configured time server on the router when it stops time synchronization with the … | |
| 1.3.6.1.4.1.4874.2.2.56.2.0.7 | NotificationjuniNtpFirstSystemClockSet | current | This trap will be generated to report when the system clock offset error is set for the first time from the good time sample taken, enabling the time synchroni… | |
| 1.3.6.1.4.1.4874.2.2.56.2.0.8 | NotificationjuniNtpClockOffSetLimitCrossed | current | This trap will be generated whenever the system clock's offset error is more than 15 minutes. This is an indication that something is not set properly, since a… | |
| 1.3.6.1.4.1.4874.2.2.56.2.1 | NodejuniNtpSysClock | |||
| 1.3.6.1.4.1.4874.2.2.56.2.1.1 | ScalarjuniNtpSysClockState | read-only | current | Displays the state of the NTP on the system clock. Clock states are: 0 - Clock has never been calibrated for frequency errors 1 - Clock frequency errors calibr… |
| 1.3.6.1.4.1.4874.2.2.56.2.1.2 | ScalarjuniNtpSysClockOffsetError | read-only | deprecated | Displays the estimated offset error of the system clock relative to the master clock in seconds. This variable can take on both positive and negative values; t… |
| 1.3.6.1.4.1.4874.2.2.56.2.1.3 | ScalarjuniNtpSysClockFrequencyError | read-only | deprecated | Displays the system clock frequency error in parts per million (ppm). It will always be a positive value. This error adjustment happens when the system reboots… |
| 1.3.6.1.4.1.4874.2.2.56.2.1.4 | ScalarjuniNtpSysClockRootDelay | read-only | current | This indicates the NTP time message total Network roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds. Note t… |
| 1.3.6.1.4.1.4874.2.2.56.2.1.5 | ScalarjuniNtpSysClockRootDispersion | read-only | current | This indicates the maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds. Only positive values greater t… |
| 1.3.6.1.4.1.4874.2.2.56.2.1.6 | ScalarjuniNtpSysClockStratumNumber | read-only | current | Displays the stratum number of the system clock. -1 - shows stratum is not set 1 - primary reference (e.g. calibrated atomic clock, radio clock) 2-255 - second… |
| 1.3.6.1.4.1.4874.2.2.56.2.1.7 | ScalarjuniNtpSysClockLastUpdateTime | read-only | current | Displays the time of the system clock at the time when it was last updated by any associated NTP server(peer). |
| 1.3.6.1.4.1.4874.2.2.56.2.1.8 | ScalarjuniNtpSysClockLastUpdateServer | read-only | current | Displays the IP address of the NTP server (peer) which done last update to the system clock. |
| 1.3.6.1.4.1.4874.2.2.56.2.1.9 | ScalarjuniNtpSysClockOffsetErrorNew | read-only | current | Displays the estimated offset error of the system clock relative to the master clock in seconds. This variable can take on both positive and negative values; t… |
| 1.3.6.1.4.1.4874.2.2.56.2.1.10 | ScalarjuniNtpSysClockFrequencyErrorNew | read-only | current | Displays the system clock frequency error in parts per million (ppm). It will always be a positive value. This error adjustment happens when the system reboots… |
| 1.3.6.1.4.1.4874.2.2.56.2.2 | NodejuniNtpClient | |||
| 1.3.6.1.4.1.4874.2.2.56.2.2.1 | ScalarjuniNtpClientAdminStatus | read-write | current | By enabling/disabling the NTP admin status, the router is enabled/ disabled to run as NTP client for the correction and synchronization of the system clock tim… |
| 1.3.6.1.4.1.4874.2.2.56.2.2.2 | ScalarjuniNtpClientSystemRouterIndex | read-only | current | The index of the router to be enabled or disabled as the system-wide NTP client. Always set along with juniNtpClientAdminStatus. This is also the router contex… |
| 1.3.6.1.4.1.4874.2.2.56.2.2.3 | ScalarjuniNtpClientPacketSourceIfIndex | read-write | current | When the NTP client sends an NTP packet, the source IP address is normally set to the address of the interface through which the NTP packet is sent. Sets all t… |
| 1.3.6.1.4.1.4874.2.2.56.2.2.4 | ScalarjuniNtpClientBroadcastDelay | read-write | current | Allows to set the estimated round-trip broadcast delay between the system client and broadcast servers (peers). |
| 1.3.6.1.4.1.4874.2.2.56.2.2.5 | TablejuniNtpClientIfTable | not-accessible | current | Lists all the NTP client's interfaces enabled for NTP. All the IP interfaces on the NTP client are by default enabled for NTP communications and can be disable… |
| 1.3.6.1.4.1.4874.2.2.56.2.2.5.1 | RowjuniNtpClientIfEntry | not-accessible | current | Each entry is per interface config for NTP. |
| 1.3.6.1.4.1.4874.2.2.56.2.2.5.1.1 | ColumnjuniNtpClientIfRouterIndex | not-accessible | current | The index of the router to be enabled or disabled as an NTP client. |
| 1.3.6.1.4.1.4874.2.2.56.2.2.5.1.2 | ColumnjuniNtpClientIfIfIndex | not-accessible | current | The ifIndex of the interface on the NTP client. |
| 1.3.6.1.4.1.4874.2.2.56.2.2.5.1.3 | ColumnjuniNtpClientIfDisable | read-create | current | Enable/disable NTP on the interface. |
| 1.3.6.1.4.1.4874.2.2.56.2.2.5.1.4 | ColumnjuniNtpClientIfIsBroadcastClient | read-create | current | Enable/disable NTP client's interface as broadcast client. As NTP client's broadcast interface, it receives the broadcast NTP messages from the associated serv… |
| 1.3.6.1.4.1.4874.2.2.56.2.2.5.1.5 | ColumnjuniNtpClientIfIsBroadcastServer | read-create | current | Enable/disable NTP interface as broadcast server. As NTP server's broadcast interface, it broadcast NTP messages on the interfac. |
| 1.3.6.1.4.1.4874.2.2.56.2.2.5.1.6 | ColumnjuniNtpClientIfIsBroadcastServerVersion | read-write | current | NTP Server Version on the NTP broadcast server interface. Default version is 3 |
| 1.3.6.1.4.1.4874.2.2.56.2.2.5.1.7 | ColumnjuniNtpClientIfIsBroadcastServerDelay | read-write | current | Poll Interval for broadcasting NTP messages in seconds as a power of two. Default value is 6(64s). Minimal value is 4(16s) and maximum value is 17 (36.4h). |
| 1.3.6.1.4.1.4874.2.2.56.2.3 | NodejuniNtpServer | |||
| 1.3.6.1.4.1.4874.2.2.56.2.3.1 | ScalarjuniNtpServerStratumNumber | read-write | current | Configure the stratum number (level) of the NTP server. Due to one system clock, setting the stratum number have a effect of setting all the NTP servers' strat… |
| 1.3.6.1.4.1.4874.2.2.56.2.3.2 | ScalarjuniNtpServerAdminStatus | read-write | current | Enable/disable the NTP server on the router. |
| 1.3.6.1.4.1.4874.2.2.56.2.4 | NodejuniNtpPeers | |||
| 1.3.6.1.4.1.4874.2.2.56.2.4.1 | TablejuniNtpPeerCfgTable | not-accessible | current | This table provides information on the peers with which the NTP client has associations. The associated peers(servers) to client will be running different host… |
| 1.3.6.1.4.1.4874.2.2.56.2.4.1.1 | RowjuniNtpPeerCfgEntry | not-accessible | current | Each entry provides one NTP server's configuration information. Each peer is uniquely identified by the routerIndex of the client to which it has to be associa… |
| 1.3.6.1.4.1.4874.2.2.56.2.4.1.1.1 | ColumnjuniNtpPeerCfgIpAddress | not-accessible | current | Peer's IP address. |
| 1.3.6.1.4.1.4874.2.2.56.2.4.1.1.2 | ColumnjuniNtpPeerCfgNtpVersion | read-create | current | Displays the peer server NTP software version. |
| 1.3.6.1.4.1.4874.2.2.56.2.4.1.1.3 | ColumnjuniNtpPeerCfgPacketSourceIfIndex | read-create | current | All the outgoing NTP packets' source address can be configured to one specific interface address on the NTP peer server. This object allows to configure all th… |
| 1.3.6.1.4.1.4874.2.2.56.2.4.1.1.4 | ColumnjuniNtpPeerCfgIsPreferred | read-create | current | Select whether this NTP server is a preferred time source to the NTP client to which it has association. |
| 1.3.6.1.4.1.4874.2.2.56.2.4.1.1.5 | ColumnjuniNtpPeerCfgRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2 | TablejuniNtpPeerTable | not-accessible | current | This table provides information on the peers with which the NTP client has associations. The associated peers (servers) to client will be running different hos… |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1 | RowjuniNtpPeerEntry | not-accessible | current | Each entry provides one NTP server (peer) information. Each peer is uniquely identified by the routerIndex of the client to which it has to be associated and t… |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.1 | ColumnjuniNtpPeerState | read-only | current | Displays the peer server association state to NTP client on the system. Bit Peer State Description 0 master Means NTP client on the system has chosen this peer… |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.2 | ColumnjuniNtpPeerStratumNumber | read-only | current | Displays the peer server system clock stratum number. |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.3 | ColumnjuniNtpPeerAssociationMode | read-only | current | Displays the peer server association mode to the NTP client on the router. broadcastServer - Broadcast only NTP messages. multicastServer - Broadcast only NTP … |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.4 | ColumnjuniNtpPeerBroadcastInterval | read-only | current | Displays the broadcast time interval of the NTP time messages from the peer when the peer is enabled either as broadcast server or multicast server. |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.5 | ColumnjuniNtpPeerPolledInterval | read-only | current | Displays the time interval at which peer will be polled by NTP client with which peer has associations when it is enabled as unicast server. |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.6 | ColumnjuniNtpPeerPollingInterval | read-only | current | Displays the time interval at which peer will poll the servers with which peer has associations when it is enabled as unicast server. |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.7 | ColumnjuniNtpPeerDelay | read-only | current | Displays the peer server broadcast delay. |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.8 | ColumnjuniNtpPeerDispersion | read-only | current | Displays the peer server dispersion. |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.9 | ColumnjuniNtpPeerOffsetError | read-only | current | Displays the peer server offset error. |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.10 | ColumnjuniNtpPeerReachability | read-only | current | Displays the peer reachability status. An 8-bit number that shows whether or not the peer server responded to the last eight requests to the server to which it… |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.11 | ColumnjuniNtpPeerRootDelay | read-only | current | Displays the peer server root delay. |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.12 | ColumnjuniNtpPeerRootDispersion | read-only | current | Displays the peer server root dispersion. |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.13 | ColumnjuniNtpPeerRootSyncDistance | read-only | current | Displays the peer server synchronization distance. Measure of the total time error since the update in the path to the stratum 1 server. |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.14 | ColumnjuniNtpPeerRootTime | read-only | current | Last time at which the stratum 1 server sent clock update reply to the this peer server. |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.15 | ColumnjuniNtpPeerRootTimeUpdateServer | read-only | current | IP address of the stratum 1 server last updated the peer server. |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.16 | ColumnjuniNtpPeerReceiveTime | read-only | current | If the peer server is either broadcast or multicast server, this will represent time stamp at which NTP client received the broadcast message. If it is unicast… |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.17 | ColumnjuniNtpPeerTransmitTime | read-only | current | If the peer server is either broadcast or multicast server, this will represent time stamp at which peer sent the broadcast message. If it is unicast server, i… |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.18 | ColumnjuniNtpPeerRequestTime | read-only | current | For unicast server, it represents the time stamp at which the system client sent NTP request to the peer. |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.19 | ColumnjuniNtpPeerPrecision | read-only | current | Length of the clock tick (interrupt interval) of the server's clock. |
| 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.20 | ColumnjuniNtpPeerLastUpdateTime | read-only | current | Displays the seconds since the last update from the NTP server |
| 1.3.6.1.4.1.4874.2.2.56.2.4.3 | TablejuniNtpPeerFilterRegisterTable | not-accessible | current | The following table contains NTP state variables used by the NTP clock filter and selection algorithms. This table depicts a shift register. Each stage in the … |
| 1.3.6.1.4.1.4874.2.2.56.2.4.3.1 | RowjuniNtpPeerFilterRegisterEntry | not-accessible | current | Each entry corresponds to one stage of the shift register and reading one set of values clock delay, clock offset and clock dispersion. Entries are automatical… |
| 1.3.6.1.4.1.4874.2.2.56.2.4.3.1.1 | ColumnjuniNtpPeerFilterIndex | not-accessible | current | An integer value in the specified range that is used to index into the table. The size of the table is fixed at 8. Each entry identifies a particular reading o… |
| 1.3.6.1.4.1.4874.2.2.56.2.4.3.1.2 | ColumnjuniNtpPeerFilterOffset | read-only | current | The offset of the peer clock relative to the system clock in seconds. |
| 1.3.6.1.4.1.4874.2.2.56.2.4.3.1.3 | ColumnjuniNtpPeerFilterDelay | read-only | current | Roundtrip delay of the peer clock relative to the system clock over the network path between them, in seconds. This variable can take on both positive and nega… |
| 1.3.6.1.4.1.4874.2.2.56.2.4.3.1.4 | ColumnjuniNtpPeerFilterDispersion | read-only | current | The maximum error of the peer clock relative to the system clock over the network path between them, in seconds. Only positive values greater than zero are pos… |
| 1.3.6.1.4.1.4874.2.2.56.2.5 | NodejuniNtpAccessGroup | |||
| 1.3.6.1.4.1.4874.2.2.56.2.5.1 | ScalarjuniNtpRouterAccessGroupPeer | read-write | current | Configure the name of the peer access list for the NTP enabled router. |
| 1.3.6.1.4.1.4874.2.2.56.2.5.2 | ScalarjuniNtpRouterAccessGroupServe | read-write | current | Configure the name of the serve access list for the NTP enabled router. |
| 1.3.6.1.4.1.4874.2.2.56.2.5.3 | ScalarjuniNtpRouterAccessGroupServeOnly | read-write | current | Configure the name of the serve-only access list for the NTP enabled router. |
| 1.3.6.1.4.1.4874.2.2.56.2.5.4 | ScalarjuniNtpRouterAccessGroupQueryOnly | read-write | current | Configure the name of the peer query-only list for the NTP enabled router. |
| 1.3.6.1.4.1.4874.2.2.56.3 | NodejuniSysClockConformance | |||
| 1.3.6.1.4.1.4874.2.2.56.3.1 | NodejuniSysClockCompliances | |||
| 1.3.6.1.4.1.4874.2.2.56.3.1.1 | CompliancejuniSysClockCompliance | obsolete | Obsolete compliance statement for entities that implement the Juniper System Clock MIB. This statement became obsolete when NTP traps were added. | |
| 1.3.6.1.4.1.4874.2.2.56.3.1.2 | CompliancejuniSysClockCompliance2 | obsolete | Obsolete compliance statement for entities that implement the Juniper System Clock MIB. This statement became obsolete when new offset and frequency error obje… | |
| 1.3.6.1.4.1.4874.2.2.56.3.1.3 | CompliancejuniSysClockCompliance3 | current | The compliance statement for entities that implement the Juniper System Clock MIB. | |
| 1.3.6.1.4.1.4874.2.2.56.3.2 | NodejuniSysClockGroups | |||
| 1.3.6.1.4.1.4874.2.2.56.3.2.1 | GroupjuniSysClockTimeGroup | current | The management objects pertaining to the System Clock current date and time. | |
| 1.3.6.1.4.1.4874.2.2.56.3.2.2 | GroupjuniSysClockDstGroup | current | The management objects pertaining to the System Clock daylight savings time information. | |
| 1.3.6.1.4.1.4874.2.2.56.3.2.3 | GroupjuniNtpSysClockGroup | obsolete | Obsolete management objects pertaining to the system clock when NTP is configured on the system. This group became obsolete when replacement clock offset and f… | |
| 1.3.6.1.4.1.4874.2.2.56.3.2.4 | GroupjuniNtpClientGroup | current | The management objects pertaining to the NTP client group. | |
| 1.3.6.1.4.1.4874.2.2.56.3.2.5 | GroupjuniNtpServerGroup | current | The management objects pertaining to the NTP server group. | |
| 1.3.6.1.4.1.4874.2.2.56.3.2.6 | GroupjuniNtpPeersGroup | obsolete | The management objects pertaining to the NTP peers group. | |
| 1.3.6.1.4.1.4874.2.2.56.3.2.7 | GroupjuniNtpAccessGroupGroup | current | The management objects pertaining to the NTP per router access group. | |
| 1.3.6.1.4.1.4874.2.2.56.3.2.8 | GroupjuniNtpNotificationGroup | current | The management notifications pertaining to NTP state changes. | |
| 1.3.6.1.4.1.4874.2.2.56.3.2.9 | GroupjuniNtpSysClockGroup2 | current | The management objects pertaining to the system clock when NTP is configured on the system. | |
| 1.3.6.1.4.1.4874.2.2.56.3.2.10 | GroupjuniNtpSysClockDeprecatedGroup | deprecated | Deprecated management objects pertaining to the system clock when NTP is configured on the system. | |
| 1.3.6.1.4.1.4874.2.2.56.3.2.11 | GroupjuniNtpPeersGroup1 | current | The management objects pertaining to the NTP peers group. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| JuniNtpClockSignedTime | OCTET STRING (SIZE(0..11)) | current | The ASCII character representation of NTP clock error time in seconds as a signed value. The first 16 bits represents integer part of the signed value and the last 16 bits represents the fraction part of the signed valu… |
| JuniNtpClockUnsignedTime | OCTET STRING (SIZE(0..11)) | current | The ASCII character representation of NTP clock error time in seconds as an unsigned value. The first 8 bits represents the integer part of the unsigned value and the last 48 bits represents the fraction part of the uns… |
| JuniNtpTimeStamp | OCTET STRING (SIZE(0..21)) | current | The ASCII character representation of time in 64-bit unsigned long format, where the integer part is the first 32 bits and the fraction part is the last 32 bits. This represents the time stamp as defined in the NTP pack… |
| JuniSysClockDayOfTheWeek | INTEGER { sunday(0), monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6) } | current | The day of the week. |
| JuniSysClockHour | Integer32 (0..23) | current | The hour of the day. Uses 24-hour clock format. |
| JuniSysClockMinute | Integer32 (0..59) | current | The minute of the hour. |
| JuniSysClockMonth | INTEGER { january(1), february(2), march(3), april(4), may(5), june(6), july(7), august(8), september(9), october(10), november(11), december(12) } | current | The month of the year. |
| JuniSysClockWeekOfTheMonth | INTEGER { weekFirst(0), weekOne(1), weekTwo(2), weekThree(3), weekFour(4), weekFive(5), weekLast(6) } | current | The week of the month. |