MIB Viewer

Juniper-System-MIB

215 objects
The MIB objects for managing a Juniper E-series (JUNOSe) system. This MIB complements the ENTITY-MIB.entPhysicalTable by providing the system's physical information in a format that is more user friendly and provides additional elements not found in the Entity MIB, including state information, parameters for configuring the system and additional notifications. There are two families of E-series hardware systems supported by this MIB: ERX - first generation E-series systems ES2 - second generation E-series systems
Imported Objects
ENTITY-MIBentPhysicalDescr PhysicalIndex
HOST-RESOURCES-MIBKBytes
IF-MIBInterfaceIndexOrZero
Juniper-MIBsjuniMibs
Juniper-TCJuniEnable JuniTimeFilter
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIGauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCDateAndTime DisplayString TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.4874.2.2.2IdentityjuniSystemMIBThe MIB objects for managing a Juniper E-series (JUNOSe) system. This MIB complements the ENTITY-MIB.entPhysicalTable by providing the system's physical inform…
1.3.6.1.4.1.4874.2.2.2.0NodejuniSystemTrap
1.3.6.1.4.1.4874.2.2.2.0.1NotificationjuniSystemHighMemUtilcurrentReport system memory utilization has met the conditions of juniSystemHighMemUtilThreshold. If the memory capacity is greater than 2147483647, a -1 value is ret…
1.3.6.1.4.1.4874.2.2.2.0.2NotificationjuniSystemAbatedMemUtilcurrentReports system memory utilization has met the conditions of juniSystemAbatedMemUtilThreshold. If the memory capacity is greater than 2147483647, a -1 value is …
1.3.6.1.4.1.4874.2.2.2.0.3NotificationjuniSystemModuleOperStatusChangecurrentReports a status change for a module. This trap is generated on a transition into a stable state (online or disabled) or on a transition out of online. If redu…
1.3.6.1.4.1.4874.2.2.2.0.4NotificationjuniSystemPowerStatusChangecurrentReports a change in the status of a power element.
1.3.6.1.4.1.4874.2.2.2.0.5NotificationjuniSystemFanStatusChangecurrentReports a transition between the three states of the fan subsystem. When the fan subsystem transitions to the failed state the Thermal Protection hold off time…
1.3.6.1.4.1.4874.2.2.2.0.6NotificationjuniSystemTempStatusChangecurrentReports a change in the temperature status. When the status transitions to the tooHigh state the system enters Thermal Protection mode.
1.3.6.1.4.1.4874.2.2.2.0.7NotificationjuniSystemTempProtectionStatusChangecurrentNotification about changes in the state of Thermal Protection. This notification is sent when the tempProtectionStatus changes. It is also sent when the holdOf…
1.3.6.1.4.1.4874.2.2.2.0.8NotificationjuniSystemReloadCommandcurrentNotification indicating that a slot or the entire system is about to restart due to a system console reload command. If the reload is only on an individual slo…
1.3.6.1.4.1.4874.2.2.2.0.9NotificationjuniSystemUtilizationThresholdcurrentNotification indicating that a system resource's utilization has met the conditions of juniSystemUtilizationThresholdDirection. See the DESCRIPTIONs for the ju…
1.3.6.1.4.1.4874.2.2.2.0.10NotificationjuniSystemIssuStateChangecurrentNotification about changes in the status, in case of ISSU upgrade. This notification is sent when the juniSystemIssuState changes. The trap parameter will indi…
1.3.6.1.4.1.4874.2.2.2.1NodejuniSystemObjects
1.3.6.1.4.1.4874.2.2.2.1.1NodejuniSystemGeneral
1.3.6.1.4.1.4874.2.2.2.1.1.1ScalarjuniSystemSwVersionread-onlycurrentVersion identification of currently executing system-wide operational software.
1.3.6.1.4.1.4874.2.2.2.1.1.2ScalarjuniSystemSwBuildDateread-onlycurrentBuild date of currently executing system-wide operational software version.
1.3.6.1.4.1.4874.2.2.2.1.1.3ScalarjuniSystemMemUtilPctread-onlycurrentPercentage of memory utilization on the primary system processor. A value of -1 indicates the utilization is unknown.
1.3.6.1.4.1.4874.2.2.2.1.1.4ScalarjuniSystemMemCapacityread-onlycurrentThe total memory capacity in bytes of the primary system processor. If the memory capacity is greater than 2147483647, a -1 value is returned, and the actual m…
1.3.6.1.4.1.4874.2.2.2.1.1.5ScalarjuniSystemHighMemUtilThresholdread-writecurrentThe value of memory utilization in the primary system processor, where, if reached for the first time after a high memory threshold reset, a high memory utiliz…
1.3.6.1.4.1.4874.2.2.2.1.1.6ScalarjuniSystemAbatedMemUtilThresholdread-writecurrentThe value of memory utilization in the primary system processor that is used to determine when to send an abated memory utilization event notification to the m…
1.3.6.1.4.1.4874.2.2.2.1.1.7ScalarjuniSystemBootConfigControlread-writecurrentSystem boot configuration control: file - On a system reboot use the configuration settings specified by the juniSystemBootConfigFile. The juniSystemBootConfig…
1.3.6.1.4.1.4874.2.2.2.1.1.8ScalarjuniSystemBootBackupConfigControlread-writecurrentSystem boot backup configuration control is used to determine the configuration to be used when the boot logic chooses backup mode: file - On a system reboot i…
1.3.6.1.4.1.4874.2.2.2.1.1.9ScalarjuniSystemBootForceBackupControlread-writecurrentSystem boot force backup control: off - On the next system reboot do not force the boot logic to choose backup mode. on - On the next system reboot force the b…
1.3.6.1.4.1.4874.2.2.2.1.1.10ScalarjuniSystemBootAutoRevertControlread-writecurrentThe system boot auto-revert control is used to determine when the boot logic should choose backup mode based of the reboot history: default - Use the default a…
1.3.6.1.4.1.4874.2.2.2.1.1.11ScalarjuniSystemBootAutoRevertCountToleranceread-writecurrentThe auto-revert reboot count tolerance, used in conjunction with the value of juniSystemBootAutoRevertTimeTolerance when juniSystemBootAutoRevertControl is set…
1.3.6.1.4.1.4874.2.2.2.1.1.12ScalarjuniSystemBootAutoRevertTimeToleranceread-writecurrentThe auto-revert reboot time tolerance, used in conjunction with the value of juniSystemBootAutoRevertCountTolerance when juniSystemBootAutoRevertControl is set…
1.3.6.1.4.1.4874.2.2.2.1.1.13ScalarjuniSystemBootReleaseFileread-writecurrentThe system-wide boot release file name, with extension '.rel'. On a set operation, if there is no file found with the name specified, then an error is returned.
1.3.6.1.4.1.4874.2.2.2.1.1.14ScalarjuniSystemBootConfigFileread-writecurrentThe system-wide boot configuration file name. This object and the juniSystemBootConfigControl object set to file(0) or fileOnce(1) must be specified together i…
1.3.6.1.4.1.4874.2.2.2.1.1.15ScalarjuniSystemBootBackupReleaseFileread-writecurrentThe system-wide backup boot release file name, with extension '.rel'. A zero-length string indicates that there is no backup release file so the primary releas…
1.3.6.1.4.1.4874.2.2.2.1.1.16ScalarjuniSystemBootBackupConfigFileread-writecurrentThe system-wide backup boot configuration file name, with extension '.cnf'. The juniSystemBootBackupReleaseFile object, the juniSystemBootBackupConfigControl o…
1.3.6.1.4.1.4874.2.2.2.1.1.17ScalarjuniSystemRedundancyRevertControlread-writecurrentGlobal control for reverting primary modules back from their active redundant spare modules: off - Disable global reverts of redundant modules. immediate - All…
1.3.6.1.4.1.4874.2.2.2.1.1.18ScalarjuniSystemRedundancyRevertTimeOfDayread-writecurrentThe number of seconds past midnight local time on any given day at which time redundant slot reverts are allowed to occur. This object must be set concurrently…
1.3.6.1.4.1.4874.2.2.2.1.1.19ScalarjuniSystemMemUtilTrapEnableread-writecurrentControls the sending of primary system processor memory utilization events. Setting the value of this object to true(1) will cause system memory utilization ev…
1.3.6.1.4.1.4874.2.2.2.1.1.20ScalarjuniSystemReloadSlotNumberaccessible-for-notifycurrentIn a juniSystemReloadCommand notification, this object indicates the number of the slot that is being reloaded. Note that slot numbers are zero-based.
1.3.6.1.4.1.4874.2.2.2.1.1.21ScalarjuniSystemUtilizationThresholdDirectionaccessible-for-notifycurrentThe type of resource utilization notification being sent. See the DESCRIPTIONs for the juniSystemUtilizationTable elements for details on what conditions trigg…
1.3.6.1.4.1.4874.2.2.2.1.1.22ScalarjuniSystemUtilizationTrapEnableread-writecurrentControls the sending of system resource utilization threshold notifications. Setting the value of this object to true(1) will allow resource utilization thresh…
1.3.6.1.4.1.4874.2.2.2.1.1.23ScalarjuniSystemMemKBytesCapacityread-onlycurrentThe total memory capacity in kilo-bytes (1024 bytes) of the primary system processor.
1.3.6.1.4.1.4874.2.2.2.1.2NodejuniSystemSubsystem
1.3.6.1.4.1.4874.2.2.2.1.2.1TablejuniSystemSubsystemTablenot-accessiblecurrentTable of subsystems. A subsystem supports a 'family' of module types; that is, each module type is supported by a particular software subsystem. For example, t…
1.3.6.1.4.1.4874.2.2.2.1.2.1.1RowjuniSystemSubsystemEntrynot-accessiblecurrentA table entry containing information pertaining to a subsystem. Subsystem information takes precedence over system-wide information, but not over individual mo…
1.3.6.1.4.1.4874.2.2.2.1.2.1.1.1ColumnjuniSystemSubsystemIndexnot-accessiblecurrentArbitrary subsystem identification number.
1.3.6.1.4.1.4874.2.2.2.1.2.1.1.2ColumnjuniSystemSubsystemNameread-onlycurrentThe name of the subsystem.
1.3.6.1.4.1.4874.2.2.2.1.2.1.1.3ColumnjuniSystemSubsystemBootReleaseFileread-writecurrentThe boot release file name for this subsystem, with extension '.rel'. If a file name is specified (a non-zero-length string), then this release file takes prec…
1.3.6.1.4.1.4874.2.2.2.1.2.1.1.4ColumnjuniSystemSubsystemBootBackupReleaseFileread-writecurrentThe backup boot release file name for this subsystem, with extension '.rel'. If a file name is specified (a non-zero-length string), then this release file tak…
1.3.6.1.4.1.4874.2.2.2.1.3NodejuniSystemModule
1.3.6.1.4.1.4874.2.2.2.1.3.1ScalarjuniSystemMaxSlotNumberread-onlycurrentThe highest number assigned to a slot in the system. In a particular hardware model, module slots have fixed numbers assigned to them, even though in some inst…
1.3.6.1.4.1.4874.2.2.2.1.3.2ScalarjuniSystemMaxModulesPerSlotread-onlycurrentThe maximum number of modules and sub-modules (different levels) that can be associated with a slot number in the system. This value is constant for a particul…
1.3.6.1.4.1.4874.2.2.2.1.3.3TablejuniSystemSlotTablenot-accessiblecurrentA table of system module slot physical container configuration information.
1.3.6.1.4.1.4874.2.2.2.1.3.3.1RowjuniSystemSlotEntrynot-accessiblecurrentA table entry describing the physical status of a system module slot container, which is designated by its slot and level positions. There is an entry in this …
1.3.6.1.4.1.4874.2.2.2.1.3.3.1.1ColumnjuniSystemSlotNumbernot-accessiblecurrentThe slot number. The actual upper limit of valid values is juniSystemMaxSlotNumber. Note that slot numbers are zero-based.
1.3.6.1.4.1.4874.2.2.2.1.3.3.1.2ColumnjuniSystemSlotLevelnot-accessiblecurrentThe relative position of a module or sub-module 'container' within a slot.
1.3.6.1.4.1.4874.2.2.2.1.3.3.1.3ColumnjuniSystemSlotStatusread-onlycurrentThe status of the module slot container. unknown - The existence of a container cannot be determined noSlotContainer - The physical container does not exist em…
1.3.6.1.4.1.4874.2.2.2.1.3.3.1.4ColumnjuniSystemSlotTyperead-onlycurrentThe category of modules that can be configured for the container.
1.3.6.1.4.1.4874.2.2.2.1.3.4TablejuniSystemModuleTablenot-accessiblecurrentA table of system module and sub-module information. In this table, a module refers to a physical module (board) or a sub-module. A physical board may contain …
1.3.6.1.4.1.4874.2.2.2.1.3.4.1RowjuniSystemModuleEntrynot-accessiblecurrentA table entry that provides information about a specific system module or sub-module in a particular module location. There are only entries in this table for …
1.3.6.1.4.1.4874.2.2.2.1.3.4.1.1ColumnjuniSystemModuleOperStatusread-onlycurrentThe current operational status of the module (or sub-module): unknown - The status of the module cannot be determined notPresent - No hardware is currently pre…
1.3.6.1.4.1.4874.2.2.2.1.3.4.1.2ColumnjuniSystemModuleDisableReasonread-onlycurrentIndicates the condition causing the module (or sub-module) to be disabled: none - Value when the module is not disabled unknown - Unknown reason for disablemen…
1.3.6.1.4.1.4874.2.2.2.1.3.4.1.3ColumnjuniSystemModuleLastChangeread-onlycurrentThe value of sysUpTime when the value of juniSystemModuleOperStatus last changed.
1.3.6.1.4.1.4874.2.2.2.1.3.4.1.4ColumnjuniSystemModuleCurrentTyperead-onlycurrentThe personality of this module based on the combination of modules that are currently inserted in the slot. This could be different from the personality report…
1.3.6.1.4.1.4874.2.2.2.1.3.4.1.5ColumnjuniSystemModuleExpectedTyperead-onlycurrentThe personality for this module position based on the combination of modules that were inserted in this slot when it was last configured. The value of this obj…
1.3.6.1.4.1.4874.2.2.2.1.3.4.1.6ColumnjuniSystemModuleDescrread-onlycurrentTextual description of the expected module in this slot.
1.3.6.1.4.1.4874.2.2.2.1.3.4.1.7ColumnjuniSystemModuleSlotSpanread-onlycurrentThe number of slot positions that the expected module spans. Most modules are only one slot wide, but some require extra space or backplane resources. These mo…
1.3.6.1.4.1.4874.2.2.2.1.3.4.1.8ColumnjuniSystemModulePortCountread-onlycurrentThe number of physical ports supported by the expected module type in this slot.
1.3.6.1.4.1.4874.2.2.2.1.3.4.1.9ColumnjuniSystemModuleSerialNumberread-onlycurrentThe serial number of the expected module in this slot. The serial number of the current module may be found in this module's entPhysicalSerialNum. A serial num…
1.3.6.1.4.1.4874.2.2.2.1.3.4.1.10ColumnjuniSystemModuleAssemblyPartNumberread-onlycurrentThe part number of the expected module in this slot. The part number of the current module may be found in this module's entPhysicalModelName. A part number is…
1.3.6.1.4.1.4874.2.2.2.1.3.4.1.11ColumnjuniSystemModuleAssemblyRevread-onlycurrentThe revision level of the expected module in this slot. The revision level of the current module may be found in this module's entPhysicalHardwareRev. A revisi…
1.3.6.1.4.1.4874.2.2.2.1.3.4.1.12ColumnjuniSystemModulePhysicalIndexread-onlycurrentThe entPhysicalIndex value assigned to the module. The ENTITY-MIB.entPhysicalTable contains additional information about this module that can be retrieved usin…
1.3.6.1.4.1.4874.2.2.2.1.3.4.1.13ColumnjuniSystemModuleSoftwareSupportread-onlycurrentAn indicator as to whether this module or sub-module has operational state information that can be managed. If the value of this object is true(1), then there …
1.3.6.1.4.1.4874.2.2.2.1.3.4.1.14ColumnjuniSystemModuleRedundancySupportread-onlycurrentAn indicator as to whether this module or sub-module is part of a redundancy group. If the value of this object is true(1), then there is an entry for this mod…
1.3.6.1.4.1.4874.2.2.2.1.3.4.1.15ColumnjuniSystemModuleLevelSpanread-onlycurrentThe number of level positions that the expected module spans. Most modules are only one level 'high', but some require extra space or backplane resources. Thes…
1.3.6.1.4.1.4874.2.2.2.1.3.5TablejuniSystemModuleSoftwareTablenot-accessiblecurrentA table of system module software information. This includes the version of the software running on the particular module, the running software's use of the mo…
1.3.6.1.4.1.4874.2.2.2.1.3.5.1RowjuniSystemModuleSoftwareEntrynot-accessiblecurrentA table entry that provides software information about a specific system module in a particular slot location.
1.3.6.1.4.1.4874.2.2.2.1.3.5.1.2ColumnjuniSystemModuleSoftwareVersionread-onlycurrentVersion identification of the currently executing operational software on this module. If the module is in a state where the software version is not known (e.g…
1.3.6.1.4.1.4874.2.2.2.1.3.5.1.3ColumnjuniSystemModuleCpuUtilPctread-onlycurrentLast available module CPU utilization percentage. A value of -1 indicates the utilization is unknown. This value is calculated over a 5 second period.
1.3.6.1.4.1.4874.2.2.2.1.3.5.1.4ColumnjuniSystemModuleMemUtilPctread-onlycurrentPercentage of module memory utilization. A value of -1 indicates the utilization is unknown.
1.3.6.1.4.1.4874.2.2.2.1.3.5.1.5ColumnjuniSystemModuleAdminStatusread-writecurrentProvides administrative control to enable/disable the module. This object is read-only for certain types of modules.
1.3.6.1.4.1.4874.2.2.2.1.3.5.1.6ColumnjuniSystemModuleControlread-writecurrentAdministrative control of this slot: noOperation - Setting this value has no effect. flush - Flushes the configuration associated with a module type that previ…
1.3.6.1.4.1.4874.2.2.2.1.3.5.1.7ColumnjuniSystemModuleBootReleaseFileread-writecurrentThe boot release file name for this slot, with extension '.rel'. If a file name is specified (not a zero-length string), then this release file takes precedenc…
1.3.6.1.4.1.4874.2.2.2.1.3.5.1.8ColumnjuniSystemModuleBootBackupReleaseFileread-writecurrentThe backup boot release file name for this slot, with extension '.rel'. If a file name is specified (a non-zero-length string), then this release file takes pr…
1.3.6.1.4.1.4874.2.2.2.1.3.5.1.9ColumnjuniSystemModuleCpuFiveSecUtilPctread-onlycurrentPercentage of average CPU utilization for the last five sec for this module. A value of -1 indicates the utilization is unknown.
1.3.6.1.4.1.4874.2.2.2.1.3.5.1.10ColumnjuniSystemModuleCpuOneMinAvgPctread-onlycurrentPercentage of average CPU utilization for the last one minute for this module. A value of -1 indicates the utilization is unknown.
1.3.6.1.4.1.4874.2.2.2.1.3.5.1.11ColumnjuniSystemModuleCpuFiveMinAvgPctread-onlycurrentPercentage of average CPU utilization for the last five minutes for this module. A value of -1 indicates the utilization is unknown.
1.3.6.1.4.1.4874.2.2.2.1.3.6TablejuniSystemModuleRedundancyTablenot-accessiblecurrentA table of system module redundancy information. Note that modules that do not support redundancy information will not appear in this table.
1.3.6.1.4.1.4874.2.2.2.1.3.6.1RowjuniSystemModuleRedundancyEntrynot-accessiblecurrentA table entry that provides information about a specific system module in a particular slot location.
1.3.6.1.4.1.4874.2.2.2.1.3.6.1.1ColumnjuniSystemModuleRedundancyGroupIdread-onlycurrentIdentifies the redundancy group as derived from hardware settings.
1.3.6.1.4.1.4874.2.2.2.1.3.6.1.2ColumnjuniSystemModuleRedundancySpareread-onlycurrentTrue only if this module is a spare redundant module.
1.3.6.1.4.1.4874.2.2.2.1.3.6.1.3ColumnjuniSystemModuleRedundancyAssociatedSlotread-onlycurrentIf this module is a primary redundant module, then the module at the same slot level with the slot number identified by this variable is the spare module that …
1.3.6.1.4.1.4874.2.2.2.1.3.6.1.4ColumnjuniSystemModuleRedundancyLockoutread-writecurrentProvides administrative control to enable/disable redundancy protection for the module in this slot.
1.3.6.1.4.1.4874.2.2.2.1.3.6.1.5ColumnjuniSystemModuleRedundancyRevertControlread-writecurrentPer-module control for reverting a primary module back from its active redundant spare module: off - Disable reverting to the primary module. immediate - Rever…
1.3.6.1.4.1.4874.2.2.2.1.3.6.1.6ColumnjuniSystemModuleRedundancyRevertTimeread-writecurrentThe date and time associated with the timeAndDate (delayed) revert operation. Only the local format for DateAndTime is supported. On a set operation, if the ti…
1.3.6.1.4.1.4874.2.2.2.1.4NodejuniSystemPort
1.3.6.1.4.1.4874.2.2.2.1.4.1TablejuniSystemPortTablenot-accessiblecurrentTable of system physical I/O ports. The information in this table reflects the ports for the expected module type in each slot; in event of a module mismatch, …
1.3.6.1.4.1.4874.2.2.2.1.4.1.1RowjuniSystemPortEntrynot-accessiblecurrentA table entry describing a physical port of the system.
1.3.6.1.4.1.4874.2.2.2.1.4.1.1.1ColumnjuniSystemPortNumbernot-accessiblecurrentPort number of this physical port, relative to the slot in which it resides. Each physical port is uniquely distinguished by its slot number, slot level and po…
1.3.6.1.4.1.4874.2.2.2.1.4.1.1.2ColumnjuniSystemPortIfIndexread-onlycurrentThe ifIndex of the Interfaces MIB ifTable entry corresponding to this physical port; if zero, the ifIndex is unknown or does not exist.
1.3.6.1.4.1.4874.2.2.2.1.4.1.1.3ColumnjuniSystemPortPhysicalIndexread-onlycurrentThe entPhysicalIndex value assigned to this port. This index may be use to retrieve other information about the port, such as description and type, from the EN…
1.3.6.1.4.1.4874.2.2.2.1.5NodejuniSystemTiming
1.3.6.1.4.1.4874.2.2.2.1.5.1ScalarjuniSystemAdminTimingSourceread-writecurrentThe administrative timing source for the system. This variable is used to select the desired timing source to be either primary, secondary or tertiary. Setting…
1.3.6.1.4.1.4874.2.2.2.1.5.2ScalarjuniSystemOperTimingSourceread-onlycurrentThe operational timing source for the system. The system periodically monitors the status of three timing sources, primary, secondary and tertiary. If the syst…
1.3.6.1.4.1.4874.2.2.2.1.5.3ScalarjuniSystemTimingAutoUpgraderead-writecurrentThis object controls the automatic timing selector upgrade. Setting this object to disable(0) will prevent automatic upgrade to the next highest timing selecto…
1.3.6.1.4.1.4874.2.2.2.1.5.4TablejuniSystemTimingSelectorTablenot-accessiblecurrentTable of system timing selectors. This table only contains entries for the primary, secondary and tertiary selecors.
1.3.6.1.4.1.4874.2.2.2.1.5.4.1RowjuniSystemTimingSelectorEntrynot-accessiblecurrentA table entry describing a system timing selector.
1.3.6.1.4.1.4874.2.2.2.1.5.4.1.1ColumnjuniSystemTimingSelectorIndexnot-accessiblecurrentThe system timing selector index associated with this entry. There are valid indexes for selector types primary(1), secondary(2), tertiary(3).
1.3.6.1.4.1.4874.2.2.2.1.5.4.1.2ColumnjuniSystemTimingSourceTyperead-writecurrentThe system timing source type for this entry. This object must be set to timingInterfaceIfIndex(1) when setting the juniSystemTimingSourceIfIndex object or tim…
1.3.6.1.4.1.4874.2.2.2.1.5.4.1.3ColumnjuniSystemTimingSourceIfIndexread-writecurrentThe ifIndex of the interface selected as the system timing source. If the juniSystemTimingSourceType object is not timingInterfaceIfIndex(1), then reading this…
1.3.6.1.4.1.4874.2.2.2.1.5.4.1.4ColumnjuniSystemTimingSourceLineread-writecurrentThe line type timing source for this entry. If the juniSystemTimingSourceType object is not timingLine(3), then reading this object will return timingSourceLin…
1.3.6.1.4.1.4874.2.2.2.1.5.4.1.5ColumnjuniSystemTimingWorkingStatusread-onlycurrentThe status associated with the working (normal) source of this system timing working selector.
1.3.6.1.4.1.4874.2.2.2.1.5.4.1.6ColumnjuniSystemTimingProtectedStatusread-onlycurrentThe status associated with the protected (backup) source of this system timing selector. If the system doesn't support protected timing sources, then sourceNot…
1.3.6.1.4.1.4874.2.2.2.1.6NodejuniSystemFabric
1.3.6.1.4.1.4874.2.2.2.1.6.1ScalarjuniSystemFabricSpeedread-onlycurrentThe speed of switching fabric, in gigabits per second.
1.3.6.1.4.1.4874.2.2.2.1.6.2ScalarjuniSystemFabricRevread-onlycurrentThe fabric revision number. If unknown, a zero-length string is reported.
1.3.6.1.4.1.4874.2.2.2.1.7NodejuniSystemNvs
1.3.6.1.4.1.4874.2.2.2.1.7.1ScalarjuniSystemNvsCountread-onlycurrentThe number of non-volatile storage (NVS) 'flash' cards in the system.
1.3.6.1.4.1.4874.2.2.2.1.7.2TablejuniSystemNvsTablenot-accessiblecurrentA table of NVS status information.
1.3.6.1.4.1.4874.2.2.2.1.7.2.1RowjuniSystemNvsEntrynot-accessiblecurrentA table entry that provides the status information for a NVS flash card.
1.3.6.1.4.1.4874.2.2.2.1.7.2.1.1ColumnjuniSystemNvsIndexnot-accessiblecurrentThe index number of the NVS flash card. There is an entry in this table for all values of this index in the range of 1 to the value of juniSystemNvsCount.
1.3.6.1.4.1.4874.2.2.2.1.7.2.1.2ColumnjuniSystemNvsStatusread-onlycurrentThe status of non-volatile storage (NVS): notPresent - The SRP or the flash card is not accessible. writeProtected - NVS is write-protected. volumeError - Stat…
1.3.6.1.4.1.4874.2.2.2.1.7.2.1.3ColumnjuniSystemNvsCapacityread-onlycurrentThe capacity of NVS storage in megabytes.
1.3.6.1.4.1.4874.2.2.2.1.7.2.1.4ColumnjuniSystemNvsUtilPctread-onlycurrentThe percentage of NVS storage used. A value of -1 indicates NVS utilization is unknown.
1.3.6.1.4.1.4874.2.2.2.1.7.2.1.5ColumnjuniSystemNvsPhysicalIndexread-onlycurrentThe entPhysicalIndex value assigned to this NVS flash card. This index may be use to retrieve other information about the NVS flash card, such as description a…
1.3.6.1.4.1.4874.2.2.2.1.8NodejuniSystemPower
1.3.6.1.4.1.4874.2.2.2.1.8.1ScalarjuniSystemPowerCountread-onlycurrentThe number of power elements in the system.
1.3.6.1.4.1.4874.2.2.2.1.8.2TablejuniSystemPowerTablenot-accessiblecurrentA table of status variables for the system power elements.
1.3.6.1.4.1.4874.2.2.2.1.8.2.1RowjuniSystemPowerEntrynot-accessiblecurrentA table entry describing status of a system power element.
1.3.6.1.4.1.4874.2.2.2.1.8.2.1.1ColumnjuniSystemPowerIndexnot-accessiblecurrentThe index number of the power element. There is an entry in this table for all values of this index in the range of 1 to the value of juniSystemPowerCount.
1.3.6.1.4.1.4874.2.2.2.1.8.2.1.2ColumnjuniSystemPowerStatusread-onlycurrentThe status of the power element: notPresent - The power element is removed from the chassis. inactive - No power is available from this element. good - Power i…
1.3.6.1.4.1.4874.2.2.2.1.8.2.1.3ColumnjuniSystemPowerPhysicalIndexread-onlycurrentThe entPhysicalIndex value assigned to this power element. This index may be use to retrieve other information about the power element, such as description and…
1.3.6.1.4.1.4874.2.2.2.1.9NodejuniSystemTemperature
1.3.6.1.4.1.4874.2.2.2.1.9.1ScalarjuniSystemFanCountread-onlycurrentThe maximum number of fan subsystems that may be present in the system. This is a fixed number for each product type.
1.3.6.1.4.1.4874.2.2.2.1.9.2TablejuniSystemFanTablenot-accessiblecurrentA table of status of the system's fan subsystems.
1.3.6.1.4.1.4874.2.2.2.1.9.2.1RowjuniSystemFanEntrynot-accessiblecurrentA table entry describing status of a fan subsystem.
1.3.6.1.4.1.4874.2.2.2.1.9.2.1.1ColumnjuniSystemFanIndexnot-accessiblecurrentThe index number of the fan subsystem. This is a number in the range of 1 to the value of juniSystemFanCount.
1.3.6.1.4.1.4874.2.2.2.1.9.2.1.2ColumnjuniSystemFanStatusread-onlycurrentStatus of fan subsystem. failed - The fan subsystem has a critical failure, or has been removed, and is now non-operational. ok - All components are operationa…
1.3.6.1.4.1.4874.2.2.2.1.9.2.1.3ColumnjuniSystemFanPhysicalIndexread-onlycurrentThe entPhysicalIndex value assigned to this fan subsystem. This index may be use to retrieve other information about the fan subsystem, such as description and…
1.3.6.1.4.1.4874.2.2.2.1.9.3ScalarjuniSystemTempCountread-onlycurrentThe maximum number of possible temperature sensors in the system.
1.3.6.1.4.1.4874.2.2.2.1.9.4TablejuniSystemTempTablenot-accessiblecurrentA table of status of the system's temperature sensors.
1.3.6.1.4.1.4874.2.2.2.1.9.4.1RowjuniSystemTempEntrynot-accessiblecurrentA table entry describing status of a temperature sensor. Sensors are located throughout the system. The ENTITY_MIB.entPhysicalTable provides detailed informati…
1.3.6.1.4.1.4874.2.2.2.1.9.4.1.1ColumnjuniSystemTempIndexnot-accessiblecurrentAn arbitrary number to uniquely identify the temperature sensor.
1.3.6.1.4.1.4874.2.2.2.1.9.4.1.2ColumnjuniSystemTempStatusread-onlycurrentThe status of a temperature sensor: unknown - sensor is not present or is not accessible failed - sensor is broken tooLow - temperature is below nominal range …
1.3.6.1.4.1.4874.2.2.2.1.9.4.1.3ColumnjuniSystemTempValueread-onlycurrentThe temperature measured by this sensor in degrees Celsius. This measurement is valid only if the value of the corresponding juniSystemTempStatus is tooLow, no…
1.3.6.1.4.1.4874.2.2.2.1.9.4.1.4ColumnjuniSystemTempPhysicalIndexread-onlycurrentThe entPhysicalIndex value assigned to this temperature sensor. If the temperature sensor is not present this object will return a value of 0. For non-zero val…
1.3.6.1.4.1.4874.2.2.2.1.9.5ScalarjuniSystemTempProtectionStatusread-onlycurrentThermal Protection status: off - No thermal protection. monitoring - Monitoring. inHoldOff - Hold off time has begun. activatedHoldOffExpired - Hold off time h…
1.3.6.1.4.1.4874.2.2.2.1.9.6ScalarjuniSystemTempProtectionHoldOffTimeread-onlycurrentThe time, in seconds, before the system enters Thermal Protection mode after a critical thermal failure is detected.
1.3.6.1.4.1.4874.2.2.2.1.9.7ScalarjuniSystemTempProtectionHoldOffTimeRemainingread-onlycurrentThe time remaining, in seconds, before the system enters Thermal Protection mode while the ThermalProtectionStatus is set to inHoldOff. The value decrements ev…
1.3.6.1.4.1.4874.2.2.2.1.10NodejuniSystemUtilization
1.3.6.1.4.1.4874.2.2.2.1.10.1TablejuniSystemUtilizationTablenot-accessiblecurrentA table of status of the utilization of system resources. It is an implementation option as to which resources (if any) are supported in this table. It is also…
1.3.6.1.4.1.4874.2.2.2.1.10.1.1RowjuniSystemUtilizationEntrynot-accessiblecurrentA table entry describing the status of the utilization of a system resource.
1.3.6.1.4.1.4874.2.2.2.1.10.1.1.1ColumnjuniSystemUtilizationResourceTypenot-accessiblecurrentThis index identifies a type of enumerated value that is used for the juniSystemUtilizationResourceSubType. See the DESCRIPTION for juniSystemUtilizationResour…
1.3.6.1.4.1.4874.2.2.2.1.10.1.1.2ColumnjuniSystemUtilizationResourceSubTypenot-accessiblecurrentThis index uses an enumerated value that is different for each value of juniSystemUtilizationResourceType. The following table shows the mapping of Type to Sub…
1.3.6.1.4.1.4874.2.2.2.1.10.1.1.3ColumnjuniSystemUtilizationLocationTypenot-accessiblecurrentThis index element identifies the format of the location information so that the juniSystemUtilizationLocation index element can be properly interpreted.
1.3.6.1.4.1.4874.2.2.2.1.10.1.1.4ColumnjuniSystemUtilizationLocationnot-accessiblecurrentThis index is used to specify the resource instance based on its location. Its value is interpreted based on the location type identified by the juniSystemUtil…
1.3.6.1.4.1.4874.2.2.2.1.10.1.1.5ColumnjuniSystemUtilizationMaxCapacityread-onlycurrentThe maximum number of units of the resource the system can support. See the DESCRIPTION of juniSystemUtilizationResourceSubType for what constitutes a unit of …
1.3.6.1.4.1.4874.2.2.2.1.10.1.1.6ColumnjuniSystemUtilizationCurrentValueread-onlycurrentThe current number of units of the resource in the system. See the DESCRIPTION for juniSystemUtilizationResourceSubType for what constitutes a unit of value fo…
1.3.6.1.4.1.4874.2.2.2.1.10.1.1.7ColumnjuniSystemUtilizationThresholdRisingread-writecurrentThe threshold value (risingVal), which, in conjunction with juniSystemUtilizationHoldDownTime (holdTime) and juniSystemUtilizationThresholdFalling (fallingVal)…
1.3.6.1.4.1.4874.2.2.2.1.10.1.1.8ColumnjuniSystemUtilizationThresholdFallingread-writecurrentThe threshold value (fallingVal), which, in conjunction with juniSystemUtilizationHoldDownTime (holdTime) and juniSystemUtilizationThresholdRising (risingVal),…
1.3.6.1.4.1.4874.2.2.2.1.10.1.1.9ColumnjuniSystemUtilizationHoldDownTimeread-writecurrentThe hold-down time (holdTime) used in conjunction with juniSystemUtilizationThresholdRising (risingVal) and juniSystemUtilizationThresholdFalling (fallingVal) …
1.3.6.1.4.1.4874.2.2.2.1.10.2TablejuniSystemCpuUtilizationTablenot-accessiblecurrentA table of status of the cpu utilization by various tasks.
1.3.6.1.4.1.4874.2.2.2.1.10.2.1RowjuniSystemCpuUtilizationEntrynot-accessiblecurrentA table entry describing cpu utilization of a particular task.
1.3.6.1.4.1.4874.2.2.2.1.10.2.1.1ColumnjuniSystemCpuUtilizationTimeMarknot-accessiblecurrentA TimeFilter for this task profile entry. Allows GetNext and GetBulk to find task profile rows which have changed since a specified value of sysUptime.
1.3.6.1.4.1.4874.2.2.2.1.10.2.1.2ColumnjuniSystemCpuUtilizationTaskNameread-onlycurrentTask name associated with this task profile entry.
1.3.6.1.4.1.4874.2.2.2.1.10.2.1.3ColumnjuniSystemCpuUtilizationInvokedread-onlycurrentNumber of times task associated with this task profile entry being invoked.
1.3.6.1.4.1.4874.2.2.2.1.10.2.1.4ColumnjuniSystemCpuUtilizationInvokationPerSecread-onlycurrentRate of invokation for the task associated with this task profile entry.
1.3.6.1.4.1.4874.2.2.2.1.10.2.1.5ColumnjuniSystemCpuUtilizationTotalRunningTimeread-onlycurrentTotal running time for the task associated with this task profile entry.
1.3.6.1.4.1.4874.2.2.2.1.10.2.1.6ColumnjuniSystemCpuUtilizationPercentageRunningTimeread-onlycurrentPercentage running time for the task associated with this task profile entry.
1.3.6.1.4.1.4874.2.2.2.1.10.2.1.7ColumnjuniSystemCpuUtilizationAverageTimePerInvokationread-onlycurrentAverage running time per invokation for the task associated with this task profile entry.
1.3.6.1.4.1.4874.2.2.2.1.10.2.1.8ColumnjuniSystemCpuUtilizationFiveSecondUtilizationread-onlycurrentUtilization in terms of percentage during the five seconds measurement interval for the task associated with this task profile entry.
1.3.6.1.4.1.4874.2.2.2.1.10.2.1.9ColumnjuniSystemCpuUtilizationOneMinuteUtilizationread-onlycurrentUtilization in terms of percentage during the one minute measurement interval for the task associated with this task profile entry.
1.3.6.1.4.1.4874.2.2.2.1.10.2.1.10ColumnjuniSystemCpuUtilizationFiveMinuteUtilizationread-onlycurrentUtilization in terms of percentage during the five minutes measurement interval for the task associated with this task profile entry.
1.3.6.1.4.1.4874.2.2.2.1.10.2.1.11ColumnjuniSystemCpuUtilizationNumberOfInstancesread-onlycurrentNumber of instances consolidated for CPU utilization calculation in this task profile entry.
1.3.6.1.4.1.4874.2.2.2.1.11NodejuniSystemIssu
1.3.6.1.4.1.4874.2.2.2.1.11.1ScalarjuniSystemIssuStateread-onlycurrentThe state of the system with respect to ISSU upgrade: idle - ISSU is currently idle initializing - ISSU initialization is in-progress initialized - ISSU has su…
1.3.6.1.4.1.4874.2.2.2.1.11.2ScalarjuniSystemIssuRunningReleaseFileread-onlycurrentThe currently running release file name, with extension '.rel'. The system was booted last time with this release file. This object is supported on the second …
1.3.6.1.4.1.4874.2.2.2.1.11.3ScalarjuniSystemIssuArmedReleaseFileread-onlycurrentThe currently armed release file name, with extension '.rel'. The system will be booted with this release file, after ISSU (if it is not aborted). This object …
1.3.6.1.4.1.4874.2.2.2.1.11.4ScalarjuniSystemIssuStatusread-onlycurrentThe status of the system with respect to ISSU upgrade. ok - no error or warning found warning - at least one upgrade warning found, upgrade is possible error -…
1.3.6.1.4.1.4874.2.2.2.1.11.5TablejuniSystemIssuCriteriaTablenot-accessiblecurrentA Table of criteria for an ISSU initialization. This table will be empty for unsupported platforms. These objects are supported on the second generation E-seri…
1.3.6.1.4.1.4874.2.2.2.1.11.5.1RowjuniSystemIssuCriteriaEntrynot-accessiblecurrentA table entry describing the criteria for an ISSU initialization.
1.3.6.1.4.1.4874.2.2.2.1.11.5.1.1ColumnjuniSystemIssuCriteriaIndexnot-accessiblecurrentThe index associated with an entry of the system ISSU Criteria Table.
1.3.6.1.4.1.4874.2.2.2.1.11.5.1.2ColumnjuniSystemIssuCriteriaDescriptionread-onlycurrentTo initialize ISSU, few criteria need to be met. If these criteria were not met, ISSU cannot be initialized. This object provides the criteria details.
1.3.6.1.4.1.4874.2.2.2.1.11.5.1.3ColumnjuniSystemIssuCriteriaStatusread-onlycurrentTo initialize ISSU, few criteria need to be met. If these criteria were not met, ISSU cannot be initialized. This object indicates whether a criteria has met. …
1.3.6.1.4.1.4874.2.2.2.2NodejuniSystemConformance
1.3.6.1.4.1.4874.2.2.2.2.1NodejuniSystemCompliances
1.3.6.1.4.1.4874.2.2.2.2.1.1CompliancejuniSystemComplianceobsoleteObsolete compliance statement for entities that implement the Juniper E-series System MIB. This statement became obsolete when system resource utilization supp…
1.3.6.1.4.1.4874.2.2.2.2.1.2CompliancejuniSystemCompliance2accessible-for-notifyobsoleteObsolete compliance statement for entities that implement the Juniper E-series System MIB. This statement became obsolete when the system resource utilization …
1.3.6.1.4.1.4874.2.2.2.2.1.3CompliancejuniSystemCompliance3obsoleteObsolete compliance statement for entities that implement the Juniper E-series System MIB. This statement became obsolete when the module level span object was…
1.3.6.1.4.1.4874.2.2.2.2.1.4CompliancejuniSystemCompliance4obsoleteObsolete compliance statement for entities that implement the Juniper E-series System MIB.
1.3.6.1.4.1.4874.2.2.2.2.1.5CompliancejuniSystemCompliance5obsoleteObsolete compliance statement for entities that implement the Juniper E-series System MIB.
1.3.6.1.4.1.4874.2.2.2.2.1.6CompliancejuniSystemCompliance6obsoleteThe compliance statement for entities that implement the Juniper E-series System MIB.
1.3.6.1.4.1.4874.2.2.2.2.1.7CompliancejuniSystemCompliance7currentThe compliance statement for entities that implement the Juniper E-series System MIB.
1.3.6.1.4.1.4874.2.2.2.2.2NodejuniSystemGroups
1.3.6.1.4.1.4874.2.2.2.2.2.1GroupjuniSystemGeneralGroupobsoleteObsolete collection of management objects providing system-wide software status and control information in a Juniper E-series product. This group became obsole…
1.3.6.1.4.1.4874.2.2.2.2.2.2GroupjuniSystemSubsystemGroupcurrentA collection of management objects providing subsystem software control information in a Juniper E-series product.
1.3.6.1.4.1.4874.2.2.2.2.2.3GroupjuniSystemModuleGroupobsoleteObsolete collection of management objects that provide system module information in a Juniper E-series product. This group became obsolete when the module leve…
1.3.6.1.4.1.4874.2.2.2.2.2.4GroupjuniSystemPortGroupcurrentA collection of management objects providing physical I/O port information in a Juniper E-series product.
1.3.6.1.4.1.4874.2.2.2.2.2.5GroupjuniSystemTimingGroupcurrentA collection of management objects providing system timing source information in a Juniper E-series product.
1.3.6.1.4.1.4874.2.2.2.2.2.6GroupjuniSystemFabricGroupcurrentA collection of management objects providing system fabric information in a Juniper E-series product.
1.3.6.1.4.1.4874.2.2.2.2.2.7GroupjuniSystemNvsGroupcurrentA collection of management objects providing system non-volatile storage (NVS) information in a Juniper E-series product.
1.3.6.1.4.1.4874.2.2.2.2.2.8GroupjuniSystemPowerGroupcurrentA collection of management objects providing system power element information in a Juniper E-series product.
1.3.6.1.4.1.4874.2.2.2.2.2.9GroupjuniSystemTemperatureGroupcurrentA collection of management objects providing system temperature control information in a Juniper E-series product.
1.3.6.1.4.1.4874.2.2.2.2.2.10GroupjuniSystemNotificationObjectsGroupcurrentA collection of management objects providing system information for notification in a Juniper E-series product.
1.3.6.1.4.1.4874.2.2.2.2.2.11GroupjuniSystemNotificationGroupobsoleteObsolete collection of notifications for system events in a Juniper E-series product. This group became obsolete when the system resource utilization notificat…
1.3.6.1.4.1.4874.2.2.2.2.2.12GroupjuniSystemUtilizationGroupobsoleteObsolete collection of management objects providing system resource utilization information and notification control for a Juniper E-series product.
1.3.6.1.4.1.4874.2.2.2.2.2.13GroupjuniSystemNotificationGroup2obsoleteA collection of notifications for system events in a Juniper E-series product.
1.3.6.1.4.1.4874.2.2.2.2.2.14GroupjuniSystemGeneralGroup2currentA collection of management objects providing system-wide software status and control information in a Juniper E-series product.
1.3.6.1.4.1.4874.2.2.2.2.2.15GroupjuniSystemModuleGroup2obsoleteA collection of management objects that provide system module information in a Juniper E-series product.
1.3.6.1.4.1.4874.2.2.2.2.2.16GroupjuniSystemUtilizationGroup2currentA collection of management objects providing system resource utilization information and notification control for a Juniper E-series product.
1.3.6.1.4.1.4874.2.2.2.2.2.17GroupjuniSystemModuleGroup3currentA collection of management objects that provide system module information in a Juniper E-series product.
1.3.6.1.4.1.4874.2.2.2.2.2.18GroupjuniSystemIssuGroupcurrentA collection of management objects that provide ISSU related information in a Juniper E-series product.
1.3.6.1.4.1.4874.2.2.2.2.2.19GroupjuniSystemNotificationGroup3currentA collection of notifications for system events in a Juniper E-series product.
Type Definitions
NameSyntaxStatusDescription
JuniSystemLocationOCTET STRING (SIZE(0..16))currentThe location instance information that is encoded according to the rules for the associated location information class. An object with this syntax is always paired with an object that uses the JuniSystemLocationType syn…
JuniSystemLocationTypeINTEGER { system(1), slot(2) }currentThe location information class that is used to understand the encoding of the associated location instance information. An object with this syntax is always paired with an object that uses the JuniSystemLocation syntax.…
JuniSystemModuleTypeINTEGER { unknown(0), erxSrp(1), erxCt3(2), erxOc3(3), erxUt3Atm(4), erxUt3Frame(5), erxUe3Atm(6), erxUe3Frame(7), erxCe1(8), erxCt1(9), erxDpfe(10), erxOc12Pos(11), erxOc12Atm(12), erxOc3Pos(13), erxOc3Atm(14), erxGe(15), erxFe8(16), erxOc3oc12Pos(17), erxOc3oc12Atm(18), erxCoc3oc12(19), erxCoc3(20), erxCoc12(21), erxOc12Server(22), erxHssi(23), erxGeFe(24), erxCt3P12(25), erxV35(26), erxUt3f12(27), erxUe3f12(28), erxCoc12F3(29), erxCoc3F3(30), erxCocxF3(31), erxVts(32), erxOc48(33), erxUt3Atm4(34), erxHybrid(35), erxOc3AtmGe(36), erxOc3AtmPos(37), erxGe2(38), erxGeHde(39), erxSrpIoa(1024), erxCt1Ioa(1025), erxCe1Ioa(1026), erxCe1TIoa(1027), erxCt3Ioa(1028), erxE3Ioa(1029), erxOc3Mm2Ioa(1030), erxOc3Sm2Ioa(1031), erxOc3Mm4Ioa(1032), erxOc3SmIr4Ioa(1033), erxOc3SmLr4Ioa(1034), erxCOc3Mm4Ioa(1035), erxCOc3SmIr4Ioa(1036), erxCOc3SmLr4Ioa(1037), erxOc12Mm1Ioa(1038), erxOc12SmIr1Ioa(1039), erxOc12SmLr1Ioa(1040), erxCOc12Mm1Ioa(1041), erxCOc12SmIr1Ioa(1042), erxCOc12SmLr1Ioa(1043), erxFe2Ioa(1044), erxFe8Ioa(1045), erxGeMm1Ioa(1046), erxGeSm1Ioa(1047), erxHssiIoa(1048), erxCt3P12Ioa(1049), erxV35Ioa(1050), erxGeSfpIoa(1051), erxUe3P12Ioa(1052), erxT3Atm4Ioa(1053), erxCOc12Mm1ApsIoa(1054), erxCOc12SmIr1ApsIoa(1055), erxCOc12SmLr1ApsIoa(1056), erxOc12Mm1ApsIoa(1057), erxOc12SmIr1ApsIoa(1058), erxOc12SmLr1ApsIoa(1059), erxCOc12AtmPosMm1Ioa(1060), erxCOc12AtmPosSmIr1Ioa(1061), erxCOc12AtmPosSmLr1Ioa(1062), erxCOc12AtmPosMm1ApsIoa(1063), erxCOc12AtmPosSmIr1ApsIoa(1064), erxCOc12AtmPosSmLr1ApsIoa(1065), erxT1E1RedundantIoa(1066), erxT3E3RedundantIoa(1067), erxCt3RedundantIoa(1068), erxOcxRedundantIoa(1069), erxCOcxRedundantIoa(1070), erxOc3Mm4ApsIoa(1071), erxOc3SmIr4ApsIoa(1072), erxOc3SmLr4ApsIoa(1073), erxOc48Ioa(1074), erxOc3Atm2Ge1Ioa(1075), erxOc3Atm2Pos2Ioa(1076), erxGe2Ioa(1077), erxFe8FxIoa(1078), erxGe8Ioa(1079), e320Srp100(2048), e320Sfm100(2049), es2Lm4(2050), es2Lm10Uplink(2051), es2Lm10(2052), e320Srp320(2053), e320Sfm320(2054), es2Lm10s(2055), e320SrpIoa(3072), es2Ge4S1Ioa(3073), es2Oc48Stm16PosS1Ioa(3074), es2ServiceS1Ioa(3075), es2Oc3Stm1x8AtmS1Ioa(3076), es2RedundancyS1Ioa(3077), es2Oc12Stm4x2PosS1Ioa(3078), es2Oc12Stm4x2AtmS1Ioa(3079), es2dash10GeS1Ioa(3080), es2Ge8S1Ioa(3081), es2dash10GePrS2Ioa(3082), es2Ge20S2Ioa(3083) , e120Srp120(4096), e120Sfm120(4097) }currentThe 'personality' type of a module found in an E-series system. Some primary modules (e.g., line cards) have only one personality; that is they only accept one personality of other level modules (e.g. I/O adapters) in t…
JuniSystemSlotLevelInteger32 (1..4)currentThe relative position of a module or sub-module 'container' within a slot. The upper limit of valid values is juniSystemMaxModulesPerSlot. A module or sub-module in the lowest numbered level for a particular slot is con…
JuniSystemSlotTypeINTEGER { noSlot(0), erxSrpSlot(1), erxLcmSlot(2), erxSrpIoaSlot(3), erxLcIoaSlot(4), es2SrpSlot(16), es2SfsSlot(17), es2FmSlot(18), es2SrpIoaSlot(19), es2FIoaSlot(20) }currentThe type of 'container' for holding a module or sub-module found in an E-series chassis. The slot type may be for a 'sub-module' where there are multiple logical functions on a single hardware module. For example, the s…
JuniSystemTaskNameOCTET STRING (SIZE(1..100))currentName of the task. Represents textual information taken from the NVT ASCII character set. The character repertoire of the string is restricted to printable, non-whitespace characters (codes 33 through 126).
JuniSystemTimingSelectorINTEGER { primary(1), secondary(2), tertiary(3), error(4)}currentThe system timing selector. primary - the primary timing selector secondary - the secondary timing selector tertiary - the tertiary timing selector error - the error in timing selector
MIB Viewer