Juniper-V35-MIB
17 objects
The X.21/V.35 Server MIB for the Juniper Networks enterprise.
Imported Objects
| IF-MIB | InterfaceIndex |
| Juniper-MIBs | juniMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.59 | IdentityjuniV35MIB | The X.21/V.35 Server MIB for the Juniper Networks enterprise. | ||
| 1.3.6.1.4.1.4874.2.2.59.1 | NodejuniV35Objects | |||
| 1.3.6.1.4.1.4874.2.2.59.1.2 | TablejuniV35IfTable | not-accessible | current | This table contains entries for X.21/V.35 interfaces present in the system. This table provides an extension to the Juniper-HDLC-MIB.juniHdlcIfTable for HDLC i… |
| 1.3.6.1.4.1.4874.2.2.59.1.2.1 | RowjuniV35IfEntry | not-accessible | current | Each entry describes the characteristics of an X.21/V.35 interface. |
| 1.3.6.1.4.1.4874.2.2.59.1.2.1.1 | ColumnjuniV35IfIndex | not-accessible | current | The ifIndex of the X.21/V.35 interface. It has the same value as the juniHdlcIfIndex for the common interface. |
| 1.3.6.1.4.1.4874.2.2.59.1.2.1.2 | ColumnjuniV35IfType | read-only | current | Read only parameter of interface type X.21/V.35. |
| 1.3.6.1.4.1.4874.2.2.59.1.2.1.3 | ColumnjuniV35IfMode | read-only | current | Read only parameter of interface mode of interface X.21/V.35 Data Terminating Equipment(DTE)/Data Communication Equipment(DCE). |
| 1.3.6.1.4.1.4874.2.2.59.1.2.1.4 | ColumnjuniV35IfClockRate | read-write | current | The clock rate setting in hertz for this X.21/V.35 interface. Only the following values are valid: 1200, 2400, 4800, 9600, 19200, 38400, 56000, 64000, 128000, … |
| 1.3.6.1.4.1.4874.2.2.59.1.2.1.5 | ColumnjuniV35IfNrzEncoding | read-write | current | The non-return-to-zero (NRZ) encoding for X.21/V.35 interface. Inverted encoding is provided with NRZI-encoding command, which is non-return-to-zero inverted (… |
| 1.3.6.1.4.1.4874.2.2.59.1.2.1.6 | ColumnjuniV35IfTxClock | read-write | current | There is an option of inverting the transmit clock signal for X.21/V.35 interface. Inverting the tranmit clock is used to compensate for skews between the cloc… |
| 1.3.6.1.4.1.4874.2.2.59.1.2.1.7 | ColumnjuniV35IfIgnoreDcd | read-write | current | When in X.21/V.35 DTE mode we have the capability of ignoring the DCD signal in determining whether or not an interface is up. |
| 1.3.6.1.4.1.4874.2.2.59.1.2.1.8 | ColumnjuniV35IfLoopback | read-write | current | Loopback interface is configured (or not) for X.21/V.35 interface |
| 1.3.6.1.4.1.4874.2.2.59.4 | NodejuniV35Conformance | |||
| 1.3.6.1.4.1.4874.2.2.59.4.1 | NodejuniV35Compliances | |||
| 1.3.6.1.4.1.4874.2.2.59.4.1.1 | CompliancejuniV35Compliance | current | The compliance statement for entities that implement the Juniper X.21/V.35 MIB. | |
| 1.3.6.1.4.1.4874.2.2.59.4.2 | NodejuniV35Groups | |||
| 1.3.6.1.4.1.4874.2.2.59.4.2.1 | GroupjuniV35Group | current | A collection of objects providing management of X.21/V.35 interfaces in a Juniper product. |