KEEPALIVED-MIB
218 objects
This MIB describes objects used by keepalived, both for VRRP and health checker.
Imported Objects
| IF-MIB | ifIndex InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType InetPortNumber InetScopeType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9586 | Nodedebian | |||
| 1.3.6.1.4.1.9586.100 | Nodeproject | |||
| 1.3.6.1.4.1.9586.100.5 | Identitykeepalived | This MIB describes objects used by keepalived, both for VRRP and health checker. | ||
| 1.3.6.1.4.1.9586.100.5.1 | Nodeglobal | |||
| 1.3.6.1.4.1.9586.100.5.1.1 | Scalarversion | read-only | current | Version of keepalived |
| 1.3.6.1.4.1.9586.100.5.1.2 | ScalarrouterId | read-only | current | Router ID |
| 1.3.6.1.4.1.9586.100.5.1.3 | Nodemail | |||
| 1.3.6.1.4.1.9586.100.5.1.3.1 | ScalarsmtpServerAddressType | read-only | current | Address type for SMTP server. |
| 1.3.6.1.4.1.9586.100.5.1.3.2 | ScalarsmtpServerAddress | read-only | current | Address of SMTP server. |
| 1.3.6.1.4.1.9586.100.5.1.3.3 | ScalarsmtpServerTimeout | read-only | current | SMTP server connection timeout. |
| 1.3.6.1.4.1.9586.100.5.1.3.4 | ScalaremailFrom | read-only | current | Email address for the From field. |
| 1.3.6.1.4.1.9586.100.5.1.3.5 | TableemailTable | not-accessible | current | Table of email notification addresses. |
| 1.3.6.1.4.1.9586.100.5.1.3.5.1 | RowemailEntry | not-accessible | current | Email address to be notified with an alert. |
| 1.3.6.1.4.1.9586.100.5.1.3.5.1.1 | ColumnemailIndex | not-accessible | current | Index for the email address. |
| 1.3.6.1.4.1.9586.100.5.1.3.5.1.2 | ColumnemailAddress | read-only | current | Email address to be notified when an alert is raised. |
| 1.3.6.1.4.1.9586.100.5.1.4 | ScalartrapEnable | read-only | current | Indicate whether traps should be sent for various events. |
| 1.3.6.1.4.1.9586.100.5.1.5 | ScalarlinkBeat | read-only | current | Indicate which method is used to check if a link is up or down. netlink(1) means that the kernel will push a link state change while polling(2) means that the … |
| 1.3.6.1.4.1.9586.100.5.2 | Nodevrrp | |||
| 1.3.6.1.4.1.9586.100.5.2.1 | TablevrrpSyncGroupTable | not-accessible | current | Table of sync groups |
| 1.3.6.1.4.1.9586.100.5.2.1.1 | RowvrrpSyncGroupEntry | not-accessible | current | Information describing a sync group |
| 1.3.6.1.4.1.9586.100.5.2.1.1.1 | ColumnvrrpSyncGroupIndex | not-accessible | current | Index of the synchronisation group. |
| 1.3.6.1.4.1.9586.100.5.2.1.1.2 | ColumnvrrpSyncGroupName | read-only | current | Name of the synchronisation group. |
| 1.3.6.1.4.1.9586.100.5.2.1.1.3 | ColumnvrrpSyncGroupState | read-only | current | Current state of the synchronisation group. |
| 1.3.6.1.4.1.9586.100.5.2.1.1.4 | ColumnvrrpSyncGroupSmtpAlert | read-only | current | Will SMTP alert be sent for this synchronisation group? |
| 1.3.6.1.4.1.9586.100.5.2.1.1.5 | ColumnvrrpSyncGroupNotifyExec | read-only | current | Will we execute notification script for this group? |
| 1.3.6.1.4.1.9586.100.5.2.1.1.6 | ColumnvrrpSyncGroupScriptMaster | read-only | current | Script to execute when the group becomes master. |
| 1.3.6.1.4.1.9586.100.5.2.1.1.7 | ColumnvrrpSyncGroupScriptBackup | read-only | current | Script to execute when the group becomes backup. |
| 1.3.6.1.4.1.9586.100.5.2.1.1.8 | ColumnvrrpSyncGroupScriptFault | read-only | current | Script to execute when the group is in fault state. |
| 1.3.6.1.4.1.9586.100.5.2.1.1.9 | ColumnvrrpSyncGroupScript | read-only | current | Script to execute whenever a state change occurs. |
| 1.3.6.1.4.1.9586.100.5.2.2 | TablevrrpSyncGroupMemberTable | not-accessible | current | Table of instances contained in sync groups |
| 1.3.6.1.4.1.9586.100.5.2.2.1 | RowvrrpSyncGroupMemberEntry | not-accessible | current | Information describing a member of a sync group |
| 1.3.6.1.4.1.9586.100.5.2.2.1.1 | ColumnvrrpSyncGroupMemberInstanceIndex | not-accessible | current | Index of an instance in a synchronisation group. There is no relation with this index and the index of the corresponding instance in vrrpInstanceTable. Use the… |
| 1.3.6.1.4.1.9586.100.5.2.2.1.2 | ColumnvrrpSyncGroupMemberName | read-only | current | Name of the instance contained in the synchronisation group. |
| 1.3.6.1.4.1.9586.100.5.2.3 | TablevrrpInstanceTable | not-accessible | current | Table of VRRP instances |
| 1.3.6.1.4.1.9586.100.5.2.3.1 | RowvrrpInstanceEntry | not-accessible | current | Information describing a sync group |
| 1.3.6.1.4.1.9586.100.5.2.3.1.1 | ColumnvrrpInstanceIndex | not-accessible | current | Index of the VRRP instance. Instance 0 is for static IP and static routes. |
| 1.3.6.1.4.1.9586.100.5.2.3.1.2 | ColumnvrrpInstanceName | read-only | current | Name of the VRRP instance. |
| 1.3.6.1.4.1.9586.100.5.2.3.1.3 | ColumnvrrpInstanceVirtualRouterId | read-only | current | Virtual Router ID (VRID) for this VRRP instance. |
| 1.3.6.1.4.1.9586.100.5.2.3.1.4 | ColumnvrrpInstanceState | read-only | current | Current state of this VRRP instance. |
| 1.3.6.1.4.1.9586.100.5.2.3.1.5 | ColumnvrrpInstanceInitialState | read-only | current | Initial state of this VRRP instance. |
| 1.3.6.1.4.1.9586.100.5.2.3.1.6 | ColumnvrrpInstanceWantedState | read-only | current | State wanted by the operator for this VRRP instance. |
| 1.3.6.1.4.1.9586.100.5.2.3.1.7 | ColumnvrrpInstanceBasePriority | read-write | current | Base priority (as defined in the configuration file) for this VRRP instance. This value can be modified to force the virtual router instance to become backup o… |
| 1.3.6.1.4.1.9586.100.5.2.3.1.8 | ColumnvrrpInstanceEffectivePriority | read-only | current | Effective priority for this VRRP instance. Status of interfaces and script results are used to compute this value from the base priority. |
| 1.3.6.1.4.1.9586.100.5.2.3.1.9 | ColumnvrrpInstanceVipsStatus | read-only | current | Are all VIP of this VRRP instance enabled? |
| 1.3.6.1.4.1.9586.100.5.2.3.1.10 | ColumnvrrpInstancePrimaryInterface | read-only | current | Primary interface of this VRRP instance. |
| 1.3.6.1.4.1.9586.100.5.2.3.1.11 | ColumnvrrpInstanceTrackPrimaryIf | read-only | current | Do we track the status of the primary interface? |
| 1.3.6.1.4.1.9586.100.5.2.3.1.12 | ColumnvrrpInstanceAdvertisementsInt | read-only | current | Delay in seconds between two VRRP advertisements. |
| 1.3.6.1.4.1.9586.100.5.2.3.1.13 | ColumnvrrpInstancePreempt | read-write | current | Will a higher priority advertisement preempt a lower instance? |
| 1.3.6.1.4.1.9586.100.5.2.3.1.14 | ColumnvrrpInstancePreemptDelay | read-only | current | Delay after startup until preemption can happen. 0 means that there is no delay. |
| 1.3.6.1.4.1.9586.100.5.2.3.1.15 | ColumnvrrpInstanceAuthType | read-only | current | Authentication method to authenticate other peers. |
| 1.3.6.1.4.1.9586.100.5.2.3.1.16 | ColumnvrrpInstanceLvsSyncDaemon | read-only | current | Is LVS sync daemon enabled for this VRRP instance? |
| 1.3.6.1.4.1.9586.100.5.2.3.1.17 | ColumnvrrpInstanceLvsSyncInterface | read-only | current | If LVS sync daemon is enabled, which interface to use for syncing? |
| 1.3.6.1.4.1.9586.100.5.2.3.1.18 | ColumnvrrpInstanceSyncGroup | read-only | current | Name of the synchronisation group this VRRP instance belongs, if any. |
| 1.3.6.1.4.1.9586.100.5.2.3.1.19 | ColumnvrrpInstanceGarpDelay | read-only | current | Delay to launch gratuitous ARP (GARP). |
| 1.3.6.1.4.1.9586.100.5.2.3.1.20 | ColumnvrrpInstanceSmtpAlert | read-only | current | Will SMTP alert be sent for this VRRP instance? |
| 1.3.6.1.4.1.9586.100.5.2.3.1.21 | ColumnvrrpInstanceNotifyExec | read-only | current | Will we execute notification script for this instance? |
| 1.3.6.1.4.1.9586.100.5.2.3.1.22 | ColumnvrrpInstanceScriptMaster | read-only | current | Script to execute when the instance becomes master. |
| 1.3.6.1.4.1.9586.100.5.2.3.1.23 | ColumnvrrpInstanceScriptBackup | read-only | current | Script to execute when the instance becomes backup. |
| 1.3.6.1.4.1.9586.100.5.2.3.1.24 | ColumnvrrpInstanceScriptFault | read-only | current | Script to execute when the instance is in fault state. |
| 1.3.6.1.4.1.9586.100.5.2.3.1.25 | ColumnvrrpInstanceScriptStop | read-only | current | Script to execute when the instance is stopped. |
| 1.3.6.1.4.1.9586.100.5.2.3.1.26 | ColumnvrrpInstanceScript | read-only | current | Script to execute whenever a state change occurs. |
| 1.3.6.1.4.1.9586.100.5.2.4 | TablevrrpTrackedInterfaceTable | not-accessible | current | Table of tracked interfaces for each VRRP instance. |
| 1.3.6.1.4.1.9586.100.5.2.4.1 | RowvrrpTrackedInterfaceEntry | not-accessible | current | Information describing a tracked interface |
| 1.3.6.1.4.1.9586.100.5.2.4.1.1 | ColumnvrrpTrackedInterfaceName | read-only | current | Name of the tracked interface. |
| 1.3.6.1.4.1.9586.100.5.2.4.1.2 | ColumnvrrpTrackedInterfaceWeight | read-only | current | Weight of the tracked interface. |
| 1.3.6.1.4.1.9586.100.5.2.5 | TablevrrpTrackedScriptTable | not-accessible | current | Table of tracked interfaces for each VRRP instance. |
| 1.3.6.1.4.1.9586.100.5.2.5.1 | RowvrrpTrackedScriptEntry | not-accessible | current | Information describing a tracked script |
| 1.3.6.1.4.1.9586.100.5.2.5.1.1 | ColumnvrrpTrackedScriptIndex | not-accessible | current | Index of the tracked script in the set of tracked scripts for the given VRRP instance. This index has no relation with the index of vrrpScriptTable. |
| 1.3.6.1.4.1.9586.100.5.2.5.1.2 | ColumnvrrpTrackedScriptName | read-only | current | Name of the tracked interface. |
| 1.3.6.1.4.1.9586.100.5.2.5.1.3 | ColumnvrrpTrackedScriptWeight | read-only | current | Weight of the tracked interface. |
| 1.3.6.1.4.1.9586.100.5.2.6 | TablevrrpAddressTable | not-accessible | current | Table of static and virtual addresses |
| 1.3.6.1.4.1.9586.100.5.2.6.1 | RowvrrpAddressEntry | not-accessible | current | Information describing an address. This can be a static address or a virtual address. In case of static address, the VRRP instance index is 0. |
| 1.3.6.1.4.1.9586.100.5.2.6.1.1 | ColumnvrrpAddressIndex | not-accessible | current | Address index. |
| 1.3.6.1.4.1.9586.100.5.2.6.1.2 | ColumnvrrpAddressType | read-only | current | A value that represents a type of Internet address. |
| 1.3.6.1.4.1.9586.100.5.2.6.1.3 | ColumnvrrpAddressValue | read-only | current | Actual IP address. |
| 1.3.6.1.4.1.9586.100.5.2.6.1.4 | ColumnvrrpAddressBroadcast | read-only | current | Broadcast address associated with the IP address. |
| 1.3.6.1.4.1.9586.100.5.2.6.1.5 | ColumnvrrpAddressMask | read-only | current | Address mask. |
| 1.3.6.1.4.1.9586.100.5.2.6.1.6 | ColumnvrrpAddressScope | read-only | current | Address scope. |
| 1.3.6.1.4.1.9586.100.5.2.6.1.7 | ColumnvrrpAddressIfIndex | read-only | current | Index of the interface to which the IP address is linked to. |
| 1.3.6.1.4.1.9586.100.5.2.6.1.8 | ColumnvrrpAddressIfName | read-only | current | Name of the interface to which the IP address is linked to. |
| 1.3.6.1.4.1.9586.100.5.2.6.1.9 | ColumnvrrpAddressIfAlias | read-only | current | Alias name of the interface. |
| 1.3.6.1.4.1.9586.100.5.2.6.1.10 | ColumnvrrpAddressStatus | read-only | current | Is the IP address set? |
| 1.3.6.1.4.1.9586.100.5.2.6.1.11 | ColumnvrrpAddressAdvertising | read-only | current | Status of VRRP advertising for this IP address. |
| 1.3.6.1.4.1.9586.100.5.2.7 | TablevrrpRouteTable | not-accessible | current | Table of static and virtual routes. |
| 1.3.6.1.4.1.9586.100.5.2.7.1 | RowvrrpRouteEntry | not-accessible | current | Information describing a route. In case of a static route, the instance index is 0. |
| 1.3.6.1.4.1.9586.100.5.2.7.1.1 | ColumnvrrpRouteIndex | not-accessible | current | Route index. |
| 1.3.6.1.4.1.9586.100.5.2.7.1.2 | ColumnvrrpRouteAddressType | read-only | current | Route type of internet address. |
| 1.3.6.1.4.1.9586.100.5.2.7.1.3 | ColumnvrrpRouteDestination | read-only | current | Route destination. |
| 1.3.6.1.4.1.9586.100.5.2.7.1.4 | ColumnvrrpRouteDestinationMask | read-only | current | Route destination mask. |
| 1.3.6.1.4.1.9586.100.5.2.7.1.5 | ColumnvrrpRouteGateway | read-only | current | Gateway for the given destination. |
| 1.3.6.1.4.1.9586.100.5.2.7.1.6 | ColumnvrrpRouteSecondaryGateway | read-only | current | An optional second gateway for the given destination. |
| 1.3.6.1.4.1.9586.100.5.2.7.1.7 | ColumnvrrpRouteSource | read-only | current | Which source IP address to use with this route. |
| 1.3.6.1.4.1.9586.100.5.2.7.1.8 | ColumnvrrpRouteMetric | read-only | current | Metric of this route. |
| 1.3.6.1.4.1.9586.100.5.2.7.1.9 | ColumnvrrpRouteScope | read-only | current | Scope of this route. |
| 1.3.6.1.4.1.9586.100.5.2.7.1.10 | ColumnvrrpRouteType | read-only | current | Kind of route. |
| 1.3.6.1.4.1.9586.100.5.2.7.1.11 | ColumnvrrpRouteIfIndex | read-only | current | Interface attached to this route. |
| 1.3.6.1.4.1.9586.100.5.2.7.1.12 | ColumnvrrpRouteIfName | read-only | current | Name of the interface of attached to this route. |
| 1.3.6.1.4.1.9586.100.5.2.7.1.13 | ColumnvrrpRouteRoutingTable | read-only | current | Routing table where to route should be inserted. |
| 1.3.6.1.4.1.9586.100.5.2.7.1.14 | ColumnvrrpRouteStatus | read-only | current | Is this route set in the kernel? |
| 1.3.6.1.4.1.9586.100.5.2.8 | TablevrrpScriptTable | not-accessible | current | Table of VRRP scripts |
| 1.3.6.1.4.1.9586.100.5.2.8.1 | RowvrrpScriptEntry | not-accessible | current | Information describing a VRRP script |
| 1.3.6.1.4.1.9586.100.5.2.8.1.1 | ColumnvrrpScriptIndex | not-accessible | current | Script index. |
| 1.3.6.1.4.1.9586.100.5.2.8.1.2 | ColumnvrrpScriptName | read-only | current | Symbolic name of the script. |
| 1.3.6.1.4.1.9586.100.5.2.8.1.3 | ColumnvrrpScriptCommand | read-only | current | Command executed when running the script. |
| 1.3.6.1.4.1.9586.100.5.2.8.1.4 | ColumnvrrpScriptInterval | read-only | current | Interval between two runs of the script. |
| 1.3.6.1.4.1.9586.100.5.2.8.1.5 | ColumnvrrpScriptWeight | read-only | current | Weight of the script if successful. |
| 1.3.6.1.4.1.9586.100.5.2.8.1.6 | ColumnvrrpScriptResult | read-only | current | Current status of the script. |
| 1.3.6.1.4.1.9586.100.5.2.8.1.7 | ColumnvrrpScriptRise | read-only | current | How many times the script should succeed before OK. |
| 1.3.6.1.4.1.9586.100.5.2.8.1.8 | ColumnvrrpScriptFall | read-only | current | How many times the script should fail before KO. |
| 1.3.6.1.4.1.9586.100.5.2.9 | NodevrrpTrap | |||
| 1.3.6.1.4.1.9586.100.5.2.9.0 | NodevrrpTraps | |||
| 1.3.6.1.4.1.9586.100.5.2.9.0.1 | NotificationvrrpSyncGroupStateChange | current | This trap signifies that the state of the whole vrrp sync group changed. | |
| 1.3.6.1.4.1.9586.100.5.2.9.0.2 | NotificationvrrpInstanceStateChange | current | This trap signifies that the state of a vrrp instance changed. | |
| 1.3.6.1.4.1.9586.100.5.2.9.1 | NodevrrpTrapControl | |||
| 1.3.6.1.4.1.9586.100.5.3 | Nodecheck | |||
| 1.3.6.1.4.1.9586.100.5.3.1 | TablevirtualServerGroupTable | not-accessible | current | Table of virtual server groups. |
| 1.3.6.1.4.1.9586.100.5.3.1.1 | RowvirtualServerGroupEntry | not-accessible | current | Information describing a virtual server group. |
| 1.3.6.1.4.1.9586.100.5.3.1.1.1 | ColumnvirtualServerGroupIndex | not-accessible | current | Index of the virtual server group. |
| 1.3.6.1.4.1.9586.100.5.3.1.1.2 | ColumnvirtualServerGroupName | read-only | current | Name of the virtual server group. |
| 1.3.6.1.4.1.9586.100.5.3.2 | TablevirtualServerGroupMemberTable | not-accessible | current | Table of members of a virtual server group. |
| 1.3.6.1.4.1.9586.100.5.3.2.1 | RowvirtualServerGroupMemberEntry | not-accessible | current | Description of a member of a virtual server group. |
| 1.3.6.1.4.1.9586.100.5.3.2.1.1 | ColumnvirtualServerGroupMemberIndex | not-accessible | current | Index of the member into virtual server group. |
| 1.3.6.1.4.1.9586.100.5.3.2.1.2 | ColumnvirtualServerGroupMemberType | read-only | current | Kind of entry: firewall mark, address with port or range of addresses with port. |
| 1.3.6.1.4.1.9586.100.5.3.2.1.3 | ColumnvirtualServerGroupMemberFwMark | read-only | current | Firewall mark for this member. If the kind of this member is not fwmark(1), then this entry should not exist for the current row. |
| 1.3.6.1.4.1.9586.100.5.3.2.1.4 | ColumnvirtualServerGroupMemberAddrType | read-only | current | Type of IP address for this member. If the kind of this member is neither address(2) or range(3), then this entry should not exist for the current row. |
| 1.3.6.1.4.1.9586.100.5.3.2.1.5 | ColumnvirtualServerGroupMemberAddress | read-only | current | IP address of this member. If the kind of this member is not address(2), then this entry should not exist for the current row. |
| 1.3.6.1.4.1.9586.100.5.3.2.1.6 | ColumnvirtualServerGroupMemberAddr1 | read-only | current | First IP address of the range for this member. If the kind of this member is not range(3), then this entry should not exist for the current row. |
| 1.3.6.1.4.1.9586.100.5.3.2.1.7 | ColumnvirtualServerGroupMemberAddr2 | read-only | current | Second IP address of the range for this member. If the kind of this member is not range(3), then this entry should not exist for the current row. |
| 1.3.6.1.4.1.9586.100.5.3.2.1.8 | ColumnvirtualServerGroupMemberPort | read-only | current | V port for this member. If the kind of this member is neither address(2) nor range(3), then this entry should not exist for the current row. |
| 1.3.6.1.4.1.9586.100.5.3.3 | TablevirtualServerTable | not-accessible | current | Table of virtual servers. |
| 1.3.6.1.4.1.9586.100.5.3.3.1 | RowvirtualServerEntry | not-accessible | current | Information describing a virtual server. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.1 | ColumnvirtualServerIndex | not-accessible | current | Index of the virtual server. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.2 | ColumnvirtualServerType | read-only | current | Type of virtual server. A virtual server can either be defined from a firewall mark, an IP and a port or from a virtual server group. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.3 | ColumnvirtualServerNameOfGroup | read-only | current | If the virtual is defined from a group, this is the name of the group. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.4 | ColumnvirtualServerFwMark | read-only | current | If the virtual server is defined from a firewall mark, this is the value of the mark. Otherwise, this column should not exist in the current row. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.5 | ColumnvirtualServerAddrType | read-only | current | If the virtual server is defined from an IP, this is the address family. Otherwise, this column should not exist in the current row. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.6 | ColumnvirtualServerAddress | read-only | current | If the virtual server is defined from an IP address, this is the value of the IP. Otherwise, this column should not exist in the current row. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.7 | ColumnvirtualServerPort | read-only | current | If the virtual server is defined from an IP, this is the value of the port to listen for requests. Otherwise, this column should not exist in the current row. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.8 | ColumnvirtualServerProtocol | read-only | current | Which transport protocol should be used for this virtual server. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.9 | ColumnvirtualServerLoadBalancingAlgo | read-only | current | Which load balancing algorithm (or scheduler) should be used for this virtual server. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.10 | ColumnvirtualServerLoadBalancingKind | read-only | current | Forwarding method to use for this virtual server. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.11 | ColumnvirtualServerStatus | read-only | current | Current status of this virtual server. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.12 | ColumnvirtualServerVirtualHost | read-only | current | Virtualhost of this server for HTTP like requests. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.13 | ColumnvirtualServerPersist | read-only | current | Is the virtual service persistence enabled? |
| 1.3.6.1.4.1.9586.100.5.3.3.1.14 | ColumnvirtualServerPersistTimeout | read-only | current | If this virtual service is persistence, what is the timeout. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.15 | ColumnvirtualServerPersistGranularity | read-only | current | Netmask specifying the granularity of the persistence mechanism. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.16 | ColumnvirtualServerDelayLoop | read-only | current | Delay in seconds between two checks. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.17 | ColumnvirtualServerHaSuspend | read-only | current | If set to true(1), checks will be suspended if the IP of the virtual server is currently not set. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.18 | ColumnvirtualServerAlpha | read-only | current | Is alpha mode enabled? |
| 1.3.6.1.4.1.9586.100.5.3.3.1.19 | ColumnvirtualServerOmega | read-only | current | Is omega mode enabled? |
| 1.3.6.1.4.1.9586.100.5.3.3.1.20 | ColumnvirtualServerRealServersTotal | read-only | current | Total number of real servers for this virtual server. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.21 | ColumnvirtualServerRealServersUp | read-only | current | Real servers actually up for this virtual server. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.22 | ColumnvirtualServerQuorum | read-only | current | Quorum to get amond real servers to consider this virtual server up. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.23 | ColumnvirtualServerQuorumStatus | read-only | current | Current status of the quorum for this virtual server. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.24 | ColumnvirtualServerQuorumUp | read-only | current | Command to execute when the quorum is met. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.25 | ColumnvirtualServerQuorumDown | read-only | current | Command to execute when the quorum is not met. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.26 | ColumnvirtualServerHysteresis | read-only | current | Hysteresis with respect to quorum count. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.27 | ColumnvirtualServerStatsConns | read-only | current | Total number of connections scheduled for this virtual server. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.28 | ColumnvirtualServerStatsInPkts | read-only | current | Total number of incoming packets for this virtual server. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.29 | ColumnvirtualServerStatsOutPkts | read-only | current | Total number of outgoing packets for this virtual server. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.30 | ColumnvirtualServerStatsInBytes | read-only | current | Total number of incoming bytes for this virtual server. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.31 | ColumnvirtualServerStatsOutBytes | read-only | current | Total number of outgoing bytes for this virtual server. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.32 | ColumnvirtualServerRateCps | read-only | current | Current connection rate for this virtual server. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.33 | ColumnvirtualServerRateInPPS | read-only | current | Current in packet rate for this virtual server. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.34 | ColumnvirtualServerRateOutPPS | read-only | current | Current out packet rate for this virtual server. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.35 | ColumnvirtualServerRateInBPS | read-only | current | Current incoming rate for this virtual server. |
| 1.3.6.1.4.1.9586.100.5.3.3.1.36 | ColumnvirtualServerRateOutBPS | read-only | current | Current outgoing rate for this virtual server. |
| 1.3.6.1.4.1.9586.100.5.3.4 | TablerealServerTable | not-accessible | current | Table of real servers. This includes regular real servers and sorry servers. |
| 1.3.6.1.4.1.9586.100.5.3.4.1 | RowrealServerEntry | not-accessible | current | Information describing a real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.1 | ColumnrealServerIndex | not-accessible | current | Index of the real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.2 | ColumnrealServerType | read-only | current | Type of real server: either a regular real server or a sorry server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.3 | ColumnrealServerAddrType | read-only | current | Address family for this real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.4 | ColumnrealServerAddress | read-only | current | IP address of this real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.5 | ColumnrealServerPort | read-only | current | Port of the service. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.6 | ColumnrealServerStatus | read-only | current | Status of this real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.7 | ColumnrealServerWeight | read-write | current | Weight of this real server. This value can be set to 0 to disable the real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.8 | ColumnrealServerUpperConnectionLimit | read-only | current | Maximum number of connections for this real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.9 | ColumnrealServerLowerConnectionLimit | read-only | current | Minimum number of connections for this real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.10 | ColumnrealServerActionWhenDown | read-only | current | What action is performed when this server is down. Its weight can be set to 0 (inhibit) or it can be removed from the pool. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.11 | ColumnrealServerNotifyUp | read-only | current | Command to execute when this server becomes alive. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.12 | ColumnrealServerNotifyDown | read-only | current | Command to execute when this server becomes dead. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.13 | ColumnrealServerFailedChecks | read-only | current | How many failed checks for this real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.14 | ColumnrealServerStatsConns | read-only | current | Total number of connections scheduled for this real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.15 | ColumnrealServerStatsActiveConns | read-only | current | Current active connections for this real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.16 | ColumnrealServerStatsInactiveConns | read-only | current | Current inactive connections for this real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.17 | ColumnrealServerStatsPersistentConns | read-only | current | Current persistent connections for this real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.18 | ColumnrealServerStatsInPkts | read-only | current | Total number of incoming packets for this real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.19 | ColumnrealServerStatsOutPkts | read-only | current | Total number of outgoing packets for this real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.20 | ColumnrealServerStatsInBytes | read-only | current | Total number of incoming bytes for this real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.21 | ColumnrealServerStatsOutBytes | read-only | current | Total number of outgoing bytes for this real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.22 | ColumnrealServerRateCps | read-only | current | Current connection rate for this real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.23 | ColumnrealServerRateInPPS | read-only | current | Current in packet rate for this real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.24 | ColumnrealServerRateOutPPS | read-only | current | Current out packet rate for this real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.25 | ColumnrealServerRateInBPS | read-only | current | Current incoming rate for this real server. |
| 1.3.6.1.4.1.9586.100.5.3.4.1.26 | ColumnrealServerRateOutBPS | read-only | current | Current outgoing rate for this real server. |
| 1.3.6.1.4.1.9586.100.5.3.5 | NodecheckTrap | |||
| 1.3.6.1.4.1.9586.100.5.3.5.0 | NodecheckTraps | |||
| 1.3.6.1.4.1.9586.100.5.3.5.0.1 | NotificationrealServerStateChange | current | This trap signifies that the state of a real server has changed. Additional varbinds will be added depending on the value of virtualServerType: virtualServerNa… | |
| 1.3.6.1.4.1.9586.100.5.3.5.0.2 | NotificationvirtualServerQuorumStateChange | current | This trap signifies that the quorum of a virtual server has changed. Additional varbinds will be added depending on the value of virtualServerType: virtualServ… | |
| 1.3.6.1.4.1.9586.100.5.3.5.1 | NodecheckTrapControl | |||
| 1.3.6.1.4.1.9586.100.5.4 | Nodeconformance | |||
| 1.3.6.1.4.1.9586.100.5.4.1 | Nodecompliances | |||
| 1.3.6.1.4.1.9586.100.5.4.1.1 | ComplianceglobalCompliances | current | Compliance statement for global data | |
| 1.3.6.1.4.1.9586.100.5.4.1.2 | CompliancevrrpCompliances | current | The VRRP compliance statement | |
| 1.3.6.1.4.1.9586.100.5.4.1.3 | CompliancecheckCompliances | current | The check compliance statement | |
| 1.3.6.1.4.1.9586.100.5.4.2 | Nodegroups | |||
| 1.3.6.1.4.1.9586.100.5.4.2.1 | GroupglobalGroup | current | Conformance group for global data. | |
| 1.3.6.1.4.1.9586.100.5.4.2.2 | NodevrrpGroups | |||
| 1.3.6.1.4.1.9586.100.5.4.2.2.1 | GroupvrrpSyncGroup | current | Conformance group for synchronisation groups. | |
| 1.3.6.1.4.1.9586.100.5.4.2.2.2 | GroupvrrpInstanceGroup | current | Conformance group for VRRP instances. | |
| 1.3.6.1.4.1.9586.100.5.4.2.2.3 | GroupvrrpScriptGroup | current | Conformance group for VRRP scripts. | |
| 1.3.6.1.4.1.9586.100.5.4.2.2.4 | GroupvrrpTrapsGroup | current | Conformance group for VRRP traps. | |
| 1.3.6.1.4.1.9586.100.5.4.2.3 | NodecheckGroups | |||
| 1.3.6.1.4.1.9586.100.5.4.2.3.1 | GroupvirtualServerGroupGroup | current | Conformance group for virtual server groups. | |
| 1.3.6.1.4.1.9586.100.5.4.2.3.2 | GroupvirtualServerGroup | current | Conformance group for virtual servers. | |
| 1.3.6.1.4.1.9586.100.5.4.2.3.3 | GrouprealServerGroup | current | Conformance group for real servers. | |
| 1.3.6.1.4.1.9586.100.5.4.2.3.4 | GroupcheckTrapsGroup | current | Conformance group for check traps. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| VrrpState | INTEGER { init(0), backup(1), master(2), fault(3), unknown(4) } | current | Represents a VRRP state. |