KGD-802-B_MIB
20 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC1155-SMI | Counter enterprises Gauge IpAddress NetworkAddress OBJECT-TYPE TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.867 | NodeKTI | |||
| 1.3.6.1.4.1.867.65 | NodeKGD-802-B | |||
| 1.3.6.1.4.1.867.65.1 | NodeSYS_OBJ | |||
| 1.3.6.1.4.1.867.65.1.1 | TableDDM_Table | not-accessible | mandatory | |
| 1.3.6.1.4.1.867.65.1.1.1 | RowDDM_Entry | not-accessible | mandatory | Port number |
| 1.3.6.1.4.1.867.65.1.1.1.1 | ColumnIdentifier | read-only | mandatory | Type of transceiver. |
| 1.3.6.1.4.1.867.65.1.1.1.2 | ColumnConnector | read-only | mandatory | Code for connector type. |
| 1.3.6.1.4.1.867.65.1.1.1.3 | ColumnSONET_Compliance_4 | read-only | mandatory | SONET Compliance(4) bit 7 : ESCON MMF, 1310nm LED bit 6 : ESCON SMF, 1310nm Laser bit 5 : OC-192, short reach bit 4 : SONET reach specifier bit 1 bit 3 : SONET… |
| 1.3.6.1.4.1.867.65.1.1.1.4 | ColumnSONET_Compliance_5 | read-only | mandatory | SONET Compliance(5) bit 7 : Unallocated bit 6 : OC-12, single mode long reach bit 5 : OC-12, single mode inter reach bit 4 : OC-12, short reach bit 3 : Unalloc… |
| 1.3.6.1.4.1.867.65.1.1.1.5 | ColumnEthernet_Compliance | read-only | mandatory | Ethernet Compliance bit 7 : BASE-PX bit 6 : BASE-BX10 bit 5 : 100BASE-FX bit 4 : 100BASE-LX/LX10 bit 3 : 1000BASE-T bit 2 : 1000BASE-CX bit 1 : 1000BASE-LX bit… |
| 1.3.6.1.4.1.867.65.1.1.1.6 | ColumnVendor_Name | read-only | mandatory | SFP vendor name (ASCII). |
| 1.3.6.1.4.1.867.65.1.1.1.7 | ColumnVendor_OUI | read-only | mandatory | SFP vendor IEEE company ID. |
| 1.3.6.1.4.1.867.65.1.1.1.8 | ColumnTemperature | read-only | mandatory | Internally measured module temperature.(Celsius) |
| 1.3.6.1.4.1.867.65.1.1.1.9 | ColumnVoltage | read-only | mandatory | Internally measured supply voltage in transceiver.(V) |
| 1.3.6.1.4.1.867.65.1.1.1.10 | ColumnTX_Power | read-only | mandatory | Measured TX output power(uW). dBm = -30 dBm + log10( N ) x 10 |
| 1.3.6.1.4.1.867.65.1.2 | ScalarReboot | read-write | mandatory | Set 0 to reboot the device |
| 1.3.6.1.4.1.867.65.1.3 | NodetftpUpload | |||
| 1.3.6.1.4.1.867.65.1.3.1 | ScalartftpIpAddress | read-write | mandatory | IP address of the TFTP server |
| 1.3.6.1.4.1.867.65.1.3.2 | ScalartftpImageFile | read-write | mandatory | File name of the new firmware file |
| 1.3.6.1.4.1.867.65.1.3.3 | ScalartftpStartGo | read-write | mandatory | Start upload command |