KSD-800M-MIB
65 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC1155-SMI | Counter enterprises Gauge IpAddress NetworkAddress OBJECT-TYPE TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.867 | NodeKTI | |||
| 1.3.6.1.4.1.867.50 | NodeKSD-800M | |||
| 1.3.6.1.4.1.867.50.1 | NodeDevice_CPU | |||
| 1.3.6.1.4.1.867.50.1.1 | ScalarsoftwareVer | read-only | mandatory | The version of the device firmware |
| 1.3.6.1.4.1.867.50.1.2 | ScalarmibFileVer | read-only | mandatory | The version of the MIB file supported |
| 1.3.6.1.4.1.867.50.4 | NodePortStatus | |||
| 1.3.6.1.4.1.867.50.4.1 | TablePortTable | not-accessible | mandatory | Port Mode table |
| 1.3.6.1.4.1.867.50.4.1.1 | RowPortEntry | not-accessible | mandatory | Port Mode table Entry |
| 1.3.6.1.4.1.867.50.4.1.1.1 | ColumnLinkStatus | read-only | mandatory | Port link status |
| 1.3.6.1.4.1.867.50.4.1.1.2 | ColumnPortType | read-only | mandatory | Port link status |
| 1.3.6.1.4.1.867.50.4.1.1.3 | ColumnAutoNegotiation | read-only | mandatory | Port auto-negotiation status |
| 1.3.6.1.4.1.867.50.4.1.1.4 | ColumnSpeedStatus | read-only | mandatory | Port speed status |
| 1.3.6.1.4.1.867.50.4.1.1.5 | ColumnDuplexStatus | read-only | mandatory | Port duplex status |
| 1.3.6.1.4.1.867.50.4.2 | TablePortControlTable | not-accessible | mandatory | Port Mode Control table |
| 1.3.6.1.4.1.867.50.4.2.1 | RowPortControl | not-accessible | mandatory | Port Mode Control table Entry |
| 1.3.6.1.4.1.867.50.4.2.1.1 | ColumnPowerControl | read-write | mandatory | Port function setting |
| 1.3.6.1.4.1.867.50.4.2.1.2 | ColumnAutoControl | read-write | mandatory | Port auto-negotiation mode setting |
| 1.3.6.1.4.1.867.50.4.2.1.3 | ColumnSpeedControl | read-write | mandatory | Port speed setting for non-auto mode |
| 1.3.6.1.4.1.867.50.4.2.1.4 | ColumnDuplexControl | read-write | mandatory | Port duplex setting for non-auto mode |
| 1.3.6.1.4.1.867.50.4.3 | ScalarPortNumber | read-only | mandatory | Number of ports equipped in the switch |
| 1.3.6.1.4.1.867.50.5 | NodeVlanStatus | |||
| 1.3.6.1.4.1.867.50.5.1 | ScalarVlanSelect | read-write | mandatory | Enable VLAN function of the device. |
| 1.3.6.1.4.1.867.50.5.2 | ScalarQ_tag_aware_VLAN | read-write | mandatory | 802.1Q VLAN AWARE function of the device. |
| 1.3.6.1.4.1.867.50.5.4 | ScalarIngress_member_filtering_mode | read-write | mandatory | Ingress member filtering mode Enable - drop received packets if ingress port is not the memeber port Disable - will not drop received packets for non-member in… |
| 1.3.6.1.4.1.867.50.5.5 | TableVlanTable | not-accessible | mandatory | VLAN group member table |
| 1.3.6.1.4.1.867.50.5.5.1 | RowVlanMember | not-accessible | mandatory | VLAN group member table entry |
| 1.3.6.1.4.1.867.50.5.5.1.1 | ColumnGroup1 | read-write | mandatory | VLAN Group 1 member port list |
| 1.3.6.1.4.1.867.50.5.5.1.2 | ColumnGroup2 | read-write | mandatory | VLAN Group 2 member port list |
| 1.3.6.1.4.1.867.50.5.5.1.3 | ColumnGroup3 | read-write | mandatory | VLAN Group 3 member port list |
| 1.3.6.1.4.1.867.50.5.5.1.4 | ColumnGroup4 | read-write | mandatory | VLAN Group 4 member port list |
| 1.3.6.1.4.1.867.50.5.5.1.5 | ColumnGroup5 | read-write | mandatory | VLAN Group 5 member port list |
| 1.3.6.1.4.1.867.50.5.5.1.6 | ColumnGroup6 | read-write | mandatory | VLAN Group 6 member port list |
| 1.3.6.1.4.1.867.50.5.5.1.7 | ColumnGroup7 | read-write | mandatory | VLAN Group 7 member port list |
| 1.3.6.1.4.1.867.50.5.5.1.8 | ColumnGroup8 | read-write | mandatory | VLAN Group 8 member port list |
| 1.3.6.1.4.1.867.50.5.5.1.9 | ColumnGroup9 | read-write | mandatory | VLAN Group 9 member port list |
| 1.3.6.1.4.1.867.50.5.6 | TableVlanIdTable | not-accessible | mandatory | VLAN group VID (VLAN ID) table |
| 1.3.6.1.4.1.867.50.5.6.1 | RowVlanIdEntry | not-accessible | mandatory | VLAN group VID table entry |
| 1.3.6.1.4.1.867.50.5.6.1.1 | ColumnVlanId | read-write | mandatory | VID of VLAN group |
| 1.3.6.1.4.1.867.50.5.7 | TableVlanPerPortTable | not-accessible | mandatory | VLAN per port setting table |
| 1.3.6.1.4.1.867.50.5.7.1 | RowVlanPerPortEntry | not-accessible | mandatory | VLAN per port setting table entry |
| 1.3.6.1.4.1.867.50.5.7.1.1 | ColumnGroupIndex | read-write | mandatory | Port default VLAN group index |
| 1.3.6.1.4.1.867.50.5.7.1.2 | ColumnUnmatchedVID | read-write | mandatory | Enable - Drop the received tagged packet whose VID does not match the ingress PVID. PVID is the VID of the VLAN group indexed by the ingress port. |
| 1.3.6.1.4.1.867.50.5.7.1.3 | ColumnEgressTag | read-write | mandatory | Egress port tag mode setting: 1 - Tagging with ingress PVID for all packets 2 - Untagging for all packets 3 - Ingress PVID insertion for untagged packets only … |
| 1.3.6.1.4.1.867.50.5.7.1.4 | ColumnNullVID | read-write | mandatory | Null VLID replacement setting Enable - replace Null VID with ingress PVID Disable - no replacement |
| 1.3.6.1.4.1.867.50.6 | NodeQosStatus | |||
| 1.3.6.1.4.1.867.50.6.1 | TableQosPerPortTable | not-accessible | mandatory | Port QoS mode table |
| 1.3.6.1.4.1.867.50.6.1.1 | RowQosPerPortEntry | not-accessible | mandatory | Port QoS mode table Entry |
| 1.3.6.1.4.1.867.50.6.1.1.1 | ColumnPort_based_priority | read-write | mandatory | Port-based classification Enable - all packets received on the port are classified as high priority Disable - no port-based classification |
| 1.3.6.1.4.1.867.50.6.1.1.2 | Columnp_classification | read-write | mandatory | 802.1p classification setting Enable - the 802.1p classification based on priority tag Disable - no 802.1p classification |
| 1.3.6.1.4.1.867.50.6.1.1.3 | ColumnTOS_DS_classification | read-write | mandatory | Default IP DSCP (DiffServ Code Point) classification setting Enable - perform default DSCP classification for IP packets The default DSCP as high priority are … |
| 1.3.6.1.4.1.867.50.6.2 | Scalarp_priority_tag | read-write | mandatory | Global high priority configuration for 802.1p classification (0~7) 802.1Q Packets with user priority tag >= this configuration are classified as high priority. |
| 1.3.6.1.4.1.867.50.6.3 | ScalarEgress_service_policy | read-write | mandatory | Global Egress service ratio between high priority queue and low priority queue 0 - 4 high : 1 low 1 - 8 high : 1 low 2 - 16 high : 1 low 3 - always high priori… |
| 1.3.6.1.4.1.867.50.6.4 | ScalarSpecific_DS_Settings_A | read-write | mandatory | User defined DSCP(A) classification Enable - IP packets with DSCP(A) setting value are classified as high priority Disable - no DSCP(A) classification |
| 1.3.6.1.4.1.867.50.6.5 | ScalarSpecific_DS_Vlaue_A | read-write | mandatory | User defined High priority DSCP(A) value setting |
| 1.3.6.1.4.1.867.50.6.6 | ScalarSpecific_DS_Settings_B | read-write | mandatory | User defined DSCP(B) classification Enable - IP packets with DSCP(B) setting value are classified as high priority Disable - no DSCP(B) classification |
| 1.3.6.1.4.1.867.50.6.7 | ScalarSpecific_DS_Vlaue_B | read-write | mandatory | User defined High priority DSCP(B) value setting |
| 1.3.6.1.4.1.867.50.6.8 | ScalarSpecific_IP_Settings_A | read-write | mandatory | User defined network address IP(A) classification Enable - IP packets whose SA and DA match IP(A) network address settings are classified as high priority Disa… |
| 1.3.6.1.4.1.867.50.6.9 | ScalarSpecific_IP_Vlaue_A | read-write | mandatory | User defined IP(A) IP address setting |
| 1.3.6.1.4.1.867.50.6.10 | ScalarSpecific_IP_Mask_A | read-write | mandatory | User defined IP(A) IP subnet mask setting |
| 1.3.6.1.4.1.867.50.6.11 | ScalarSpecific_IP_Settings_B | read-write | mandatory | User defined network address IP(B) classification Enable - IP packets whose SA and DA match IP(B) network address settings are classified as high priority Disa… |
| 1.3.6.1.4.1.867.50.6.12 | ScalarSpecific_IP_Vlaue_B | read-write | mandatory | User defined IP(B) IP address setting |
| 1.3.6.1.4.1.867.50.6.13 | ScalarSpecific_IP_Mask_B | read-write | mandatory | User defined IP(B) IP subnet mask setting |
| 1.3.6.1.4.1.867.50.8 | NodeWDTStatus | |||
| 1.3.6.1.4.1.867.50.8.1 | ScalarWDT_Set | read-write | mandatory | Enable Watch Dog Timer function of the device |
| 1.3.6.1.4.1.867.50.8.2 | ScalarWDT_Time | read-write | mandatory | WDT time setting |