KTBBEMUMIB.mib
100 objects
The MIB module to describe BB Power Supplies & Environment Monitoring EMU
Imported Objects
| KT-MIB MISSING | -- kt -- |
| RFC1213-MIB | mib-2 |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | AutonomousType DisplayString TestAndIncr TEXTUAL-CONVENTION TimeInterval TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.14008 | Nodekt | |||
| 1.3.6.1.4.1.14008.1005 | IdentitybbEMU | The MIB module to describe BB Power Supplies & Environment Monitoring EMU | ||
| 1.3.6.1.4.1.14008.1005.1 | NodebbEMUObject | |||
| 1.3.6.1.4.1.14008.1005.1.1 | NodeemuIdent | |||
| 1.3.6.1.4.1.14008.1005.1.1.1 | ScalaremuIdentManufacturer | read-only | current | The name of the emu manufacturer. |
| 1.3.6.1.4.1.14008.1005.1.1.2 | ScalaremuIdentModel | read-only | current | The emu Model designation. |
| 1.3.6.1.4.1.14008.1005.1.1.3 | ScalaremuIdentemuSoftwareVersion | read-write | current | The emu firmware/software version(s). This variable may or may not have the same value as emuIdentEMUSoftwareVersion in some implementations. |
| 1.3.6.1.4.1.14008.1005.1.1.4 | ScalaremuIdentSnmpSoftwareVersion | read-write | current | The emu snmp software version. This variable may or may not have the same value as emuIdentemuSoftwareVersion in some implementations. |
| 1.3.6.1.4.1.14008.1005.1.1.5 | ScalaremuIdentName | read-write | current | A string identifying the emu. This object should be set by the administrator. |
| 1.3.6.1.4.1.14008.1005.1.1.6 | ScalaremuMacAddress | read-only | current | A string Ethernet Mac Address of emu. example ( 00:03:cf:00:4a:06 ). |
| 1.3.6.1.4.1.14008.1005.1.1.7 | ScalargentIdentBBtype | read-write | current | Managed broad band Outdoor infrastructure Type.. such as BBC, BBS, BBM, BBW, BBP |
| 1.3.6.1.4.1.14008.1005.1.2 | NodeemuNetworks | |||
| 1.3.6.1.4.1.14008.1005.1.2.1 | ScalaremuNetworksIP | read-write | current | The IP of the emu. |
| 1.3.6.1.4.1.14008.1005.1.2.2 | ScalaremuNetworksMASK | read-write | current | The NETMASK of the emu. |
| 1.3.6.1.4.1.14008.1005.1.2.3 | ScalaremuNetworksGW | read-write | current | The GateWay_IP of the emu. |
| 1.3.6.1.4.1.14008.1005.1.2.4 | ScalaremuNetworksDNS | read-write | current | The DNS_IP of the emu. |
| 1.3.6.1.4.1.14008.1005.1.2.5 | ScalardDNSServerDomain | read-write | current | The Dynmic DNS Server Domain name. example ( ddns.com ) |
| 1.3.6.1.4.1.14008.1005.1.3 | NodeemuTrapCfg | |||
| 1.3.6.1.4.1.14008.1005.1.3.1 | ScalartrapNumOfHosts | read-only | current | the number ( maximum = 4 ) of hosts to which the snmp module will send traps |
| 1.3.6.1.4.1.14008.1005.1.3.2 | TabletrapHostTable | not-accessible | current | Table of hosts which will receive traps |
| 1.3.6.1.4.1.14008.1005.1.3.2.1 | RowtrapHostEntry | not-accessible | current | Table entry of hosts which will receive traps |
| 1.3.6.1.4.1.14008.1005.1.3.2.1.1 | ColumnipIndex | not-accessible | current | indexes to hosts |
| 1.3.6.1.4.1.14008.1005.1.3.2.1.2 | ColumntrapHostIp | read-write | current | IP addresses of the hosts which the snmp module will send traps |
| 1.3.6.1.4.1.14008.1005.1.4 | NodeemuSensorCfg | |||
| 1.3.6.1.4.1.14008.1005.1.4.1 | NodeaiCfg | |||
| 1.3.6.1.4.1.14008.1005.1.4.1.1 | TableaiCfgTable | not-accessible | current | Ai sensor install information |
| 1.3.6.1.4.1.14008.1005.1.4.1.1.1 | RowaiCfgEntry | not-accessible | current | Ai sensor install information |
| 1.3.6.1.4.1.14008.1005.1.4.1.1.1.1 | ColumnaiCfgSensorIndex | not-accessible | current | indexes to sensor 1. Temperature1 2. Temperature2 3. Humidity 4. Input Voltage 5. Input Voltage RS phase 6. Input Voltage ST phase 7. Input Voltage TR phase 8.… |
| 1.3.6.1.4.1.14008.1005.1.4.1.1.1.2 | ColumnaiCfgInstall | read-write | current | Install to sensor |
| 1.3.6.1.4.1.14008.1005.1.4.1.1.1.3 | ColumnaiCfgDesc | read-write | current | Information of sensor |
| 1.3.6.1.4.1.14008.1005.1.4.1.1.1.4 | ColumnaiCfgLean | read-write | current | sensor lean value : ( use : step1 get original val step2 divide 100 step3 use |
| 1.3.6.1.4.1.14008.1005.1.4.1.1.1.5 | ColumnaiCfgOffset | read-write | current | sensor offset value : ( use : step1 get original val step2 divide 100 step3 use |
| 1.3.6.1.4.1.14008.1005.1.4.1.1.1.6 | ColumnaiCfgCriHigh | read-write | current | Critical high alarm thresold value : ( use : step1 get original val step2 divide 100 step3 use |
| 1.3.6.1.4.1.14008.1005.1.4.1.1.1.7 | ColumnaiCfgMajHigh | read-write | current | Major high alarm thresold value : ( use : step1 get original val step2 divide 100 step3 use |
| 1.3.6.1.4.1.14008.1005.1.4.1.1.1.8 | ColumnaiCfgMajLow | read-write | current | Major low alarm thresold value : ( use : step1 get original val step2 divide 100 step3 use |
| 1.3.6.1.4.1.14008.1005.1.4.1.1.1.9 | ColumnaiCfgCriLow | read-write | current | Critical low alarm thresold value : ( use : step1 get original val step2 divide 100 step3 use |
| 1.3.6.1.4.1.14008.1005.1.4.2 | NodediCfg | |||
| 1.3.6.1.4.1.14008.1005.1.4.2.1 | TablediCfgTable | not-accessible | current | Di sensor install information |
| 1.3.6.1.4.1.14008.1005.1.4.2.1.1 | RowdiCfgEntry | not-accessible | current | Di sensor install information |
| 1.3.6.1.4.1.14008.1005.1.4.2.1.1.1 | ColumndiCfgSensorIndex | not-accessible | current | indexes to discrete sensor 1. Flood1 2. Flood2 3. Fire 4. Door (BBM Hatch) 5. BBC FAN (BBM Hatch Lock) 6. BBM Front Door 7. Methane concentration 8. CO concent… |
| 1.3.6.1.4.1.14008.1005.1.4.2.1.1.2 | ColumndiCfgInstall | read-write | current | Install to sensor |
| 1.3.6.1.4.1.14008.1005.1.4.2.1.1.3 | ColumndiCfgDesc | read-write | current | Information of sensor |
| 1.3.6.1.4.1.14008.1005.1.4.2.1.1.4 | ColumndiCfgNormal | read-write | current | normal status value of sensor |
| 1.3.6.1.4.1.14008.1005.1.4.2.1.1.5 | ColumndiCfgAlarmclass | read-write | current | alarm class |
| 1.3.6.1.4.1.14008.1005.1.4.3 | NodedoCfg | |||
| 1.3.6.1.4.1.14008.1005.1.4.3.1 | TabledoCfgTable | not-accessible | current | Do sensor install information |
| 1.3.6.1.4.1.14008.1005.1.4.3.1.1 | RowdoCfgEntry | not-accessible | current | Do sensor install information |
| 1.3.6.1.4.1.14008.1005.1.4.3.1.1.1 | ColumndoCfgIndex | not-accessible | current | Indexes to discrete output sensor 1. Digital Output1 On/Off 2. Digital Output2 On/Off 3. AC OUT Reset 4. BBM Light ON/OFF 5. BBM Green Alarm Light On/Off 6. BB… |
| 1.3.6.1.4.1.14008.1005.1.4.3.1.1.2 | ColumndoCfgInstall | read-write | current | Installed number of controller |
| 1.3.6.1.4.1.14008.1005.1.4.3.1.1.3 | ColumndoCfgDesc | read-write | current | Information of DO contact point |
| 1.3.6.1.4.1.14008.1005.1.5 | NodeemuControl | |||
| 1.3.6.1.4.1.14008.1005.1.5.1 | ScalaremuReset | read-write | current | BBC EMU Reset Control. 1. S/W Reset 2. H/W Reset |
| 1.3.6.1.4.1.14008.1005.1.6 | NodeemuStatus | |||
| 1.3.6.1.4.1.14008.1005.1.6.1 | NodeaiStatus | |||
| 1.3.6.1.4.1.14008.1005.1.6.1.1 | TableaiStatusTable | not-accessible | current | Ai Status Value |
| 1.3.6.1.4.1.14008.1005.1.6.1.1.1 | RowaiStatusEntry | not-accessible | current | Ai Status information |
| 1.3.6.1.4.1.14008.1005.1.6.1.1.1.1 | ColumnaiStatusSensorIndex | not-accessible | current | indexes to analog input sensor refer to AiCfgSensorIndex |
| 1.3.6.1.4.1.14008.1005.1.6.1.1.1.2 | ColumnaiStatusValue | read-only | current | value of analog input value 1. get value 2. divide 100 3. use |
| 1.3.6.1.4.1.14008.1005.1.6.2 | NodediStatus | |||
| 1.3.6.1.4.1.14008.1005.1.6.2.1 | TablediStatusTable | not-accessible | current | Di Status Value |
| 1.3.6.1.4.1.14008.1005.1.6.2.1.1 | RowdiStatusEntry | not-accessible | current | Di Status information |
| 1.3.6.1.4.1.14008.1005.1.6.2.1.1.1 | ColumndiStatusSensorIndex | not-accessible | current | indexes to discrete input sensor refer to DiSensorIndex |
| 1.3.6.1.4.1.14008.1005.1.6.2.1.1.2 | ColumndiStatusValue | read-only | current | status value of discrete input value |
| 1.3.6.1.4.1.14008.1005.1.6.3 | NodedoStatus | |||
| 1.3.6.1.4.1.14008.1005.1.6.3.1 | TabledoStatusTable | not-accessible | current | Do Status Value and DO Control |
| 1.3.6.1.4.1.14008.1005.1.6.3.1.1 | RowdoStatusEntry | not-accessible | current | Do Status information |
| 1.3.6.1.4.1.14008.1005.1.6.3.1.1.1 | ColumndoStatusSensorIndex | not-accessible | current | indexes to discrete input sensor refer to DO index |
| 1.3.6.1.4.1.14008.1005.1.6.3.1.1.2 | ColumndoStatusValue | read-write | current | status value of discrete output value and do control |
| 1.3.6.1.4.1.14008.1005.1.7 | Noderectifier | |||
| 1.3.6.1.4.1.14008.1005.1.7.1 | NoderectifierIdent | |||
| 1.3.6.1.4.1.14008.1005.1.7.1.1 | Scalarvendor | read-write | current | rectifier vendor code 1. vender 1 2. vender 2 3. vender 3 4. vender 4 |
| 1.3.6.1.4.1.14008.1005.1.7.1.2 | ScalarrectiInstall | read-write | current | rectifier install status 0. not install 1. install |
| 1.3.6.1.4.1.14008.1005.1.7.1.3 | ScalarrectiConnSpeed | read-write | current | rectifier connect speed ( RS232C ) 9600, 19200, 38400, 57600 |
| 1.3.6.1.4.1.14008.1005.1.7.2 | NoderectifierStatus | |||
| 1.3.6.1.4.1.14008.1005.1.7.2.1 | NoderectifierAnalogStatus | |||
| 1.3.6.1.4.1.14008.1005.1.7.2.1.1 | TablerectifierAnalogStatusTable | not-accessible | current | Rectifier analog Status Value |
| 1.3.6.1.4.1.14008.1005.1.7.2.1.1.1 | RowrectifierAnalogStatusEntry | not-accessible | current | Rectifier analog Status information |
| 1.3.6.1.4.1.14008.1005.1.7.2.1.1.1.1 | ColumnrectifierAnalogStatusIndex | not-accessible | current | indexes to analog status value 1. INPUT Voltage ( AC ) 2. OUTPUT Voltage ( DC ) 3. LOAD_A 4. CHARGE_A 5. BATTERY TEMP 6. BATTERY CELL 1 VOLTAGE 7. BATTERY CELL… |
| 1.3.6.1.4.1.14008.1005.1.7.2.1.1.1.2 | ColumnrectifierAnalogStatusValue | read-only | current | status value of analog data 1. get value 2. divide 100 3. use |
| 1.3.6.1.4.1.14008.1005.1.7.2.2 | NodediscreteStatus | |||
| 1.3.6.1.4.1.14008.1005.1.7.2.2.1 | TablediscreteStatusTable | not-accessible | current | Rectifier discrete Status Value |
| 1.3.6.1.4.1.14008.1005.1.7.2.2.1.1 | RowdiscreteStatusEntry | not-accessible | current | Rectifier discrete Status information |
| 1.3.6.1.4.1.14008.1005.1.7.2.2.1.1.1 | ColumndiscreteStatusIndex | not-accessible | current | indexes to discrete status value 1. COOLER 2. HEATER 3. EXCHANGER |
| 1.3.6.1.4.1.14008.1005.1.7.2.2.1.1.2 | ColumndiscreteStatusValue | read-only | current | status value of discrete data 0. normal 1. alarm |
| 1.3.6.1.4.1.14008.1005.1.8 | NodeemuAlarm | |||
| 1.3.6.1.4.1.14008.1005.1.8.1 | ScalaralarmTotalCount | read-only | current | Total Number of occurrence alarm. |
| 1.3.6.1.4.1.14008.1005.1.8.2 | ScalaralarmGetBulk | read-only | current | The present of active alarm conditions. Format ( Unit Seperator = | Record Seperator = $ ) CA | Alarmcode | Alarmsubcode | Alarmclass | Timestamp |$ AGENT : Al… |
| 1.3.6.1.4.1.14008.1005.2 | NodebbEMUTrap | |||
| 1.3.6.1.4.1.14008.1005.2.1 | NodetrapType | |||
| 1.3.6.1.4.1.14008.1005.2.1.1 | ScalaralarmNum | read-only | current | The Value mean alarm number. |
| 1.3.6.1.4.1.14008.1005.2.1.2 | ScalaralarmSubVal | read-only | current | The Value mean alarm status. apply to emu AI alarm. 1 : low alarm 2 : high alarm |
| 1.3.6.1.4.1.14008.1005.2.1.3 | ScalaralarmClass | read-only | current | The Value mean alarm class. 0 : normal alarm 1 : minor alarm 2 : major alarm 3 : critical alarm |
| 1.3.6.1.4.1.14008.1005.2.1.4 | ScalaralarmVal | read-only | current | The Value mean alarm value. 0 : alarm clear 1 : alarm occurrence |
| 1.3.6.1.4.1.14008.1005.2.2 | NodeemuTrap | |||
| 1.3.6.1.4.1.14008.1005.2.2.1 | NotificationemuAIALARM | current | EMUAIALARM alarmNum : Analog Input Sensor Index alarmSubval : 0: Low Alarm 1: High Alarm alarmClass : 1. Minor Alarm 2. Major Alarm 3. Critical Alarm alarmVal … | |
| 1.3.6.1.4.1.14008.1005.2.2.2 | NotificationemuDIALARM | current | EMUDIALARM alarmNum : Discrete Input Sensor Index alarmClass : 1. Minor Alarm 2. Major Alarm 3. Critical Alarm alarmVal : 0 : Alarm Clear 1 : Alarm Occurrence | |
| 1.3.6.1.4.1.14008.1005.2.2.3 | NotificationrectifierALARM | current | Rectifier ALARM alarmNum : Alarm Index 1.REC-1 NFB OFF 2.REC-1 N.C 3.REC-1 FAIL 4.REC-1 O.V.P 5.REC-2 NFB OFF 6.REC-2 N.C 7.REC-2 FAIL 8.REC-2 O.V.P 9.OUT_VOLT… | |
| 1.3.6.1.4.1.14008.1005.2.2.4 | NotificationemuCOMMALARM | current | EMU Communication alarm alarmNum : 1. internal communication alarm 2. rectifier communication alarm alarmClass : 1. Minor Alarm 2. Major Alarm 3. Critical Alar… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| NonNegativeInteger | INTEGER (0..2147483647) | current | This data type is a non-negative value. |
| PositiveInteger | INTEGER (1..2147483647) | current | This data type is a non-zero and non-negative value. |