LAN-EMULATION-CLIENT-MIB
124 objects
This module defines a portion of the management information base (MIB) for managing ATM LAN Emulation Client nodes. It is meant to be used in connection with the AToM MIB and MIB-II / RFC 1573 'ifTable' entries for each LEC / emulated 802.x network interface.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.353.5.3 | NodeatmfLanEmulation | |||
| 1.3.6.1.4.1.353.5.3.1 | IdentityleClientMIB | This module defines a portion of the management information base (MIB) for managing ATM LAN Emulation Client nodes. It is meant to be used in connection with t… | ||
| 1.3.6.1.4.1.353.5.3.1.1 | NodeleClientMIBObjects | |||
| 1.3.6.1.4.1.353.5.3.1.1.1 | TablelecConfigTable | not-accessible | current | A table describing all of the LAN Emulation Clients implemented by this host. Each LE Client has a row in the MIB-II/RFC 1573 Interfaces table (describing the … |
| 1.3.6.1.4.1.353.5.3.1.1.1.1 | RowlecConfigEntry | not-accessible | current | Each table entry contains configuration information for one LAN Emulation Client. Most of the objects are derived from Initial State Parameters in the LAN Emul… |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.1 | ColumnlecIndex | not-accessible | current | A value which uniquely identifies this conceptual row in the lecConfigTable. If the conceptual row identified by this value of lecIndex is recreated following … |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.2 | ColumnlecRowStatus | read-create | current | This object lets network managers create and delete LAN Emulation Clients, on systems that support this optional capability. It does not control Joins and Term… |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.3 | ColumnlecOwner | read-create | current | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.4 | ColumnlecConfigMode | read-create | current | Indicates whether this LAN Emulation Client should auto-configure the next time it is (re)started. In automatic(1) mode, a client uses a LAN Emulation Configur… |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.5 | ColumnlecConfigLanType | read-create | current | C2 LAN Type. The data frame format which this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in the… |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.6 | ColumnlecConfigMaxDataFrameSize | read-create | current | C3 Maximum Data Frame Size. The maximum data frame size which this client will use the next time it returns to the Initial State. Auto-configuring clients use … |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.7 | ColumnlecConfigLanName | read-create | current | C5 ELAN Name. The ELAN Name this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in their Configure … |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.8 | ColumnlecConfigLesAtmAddress | read-create | current | C9 LE Server ATM Address. The LAN Emulation Server which this client will use the next time it is started in manual configuration mode. When lecConfigMode is '… |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.9 | ColumnlecControlTimeout | read-create | current | C7 Control Time-out. Time out period used for timing out most request/response control frame interactions, as specified elsewhere [in the LAN Emulation specifi… |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.10 | ColumnlecMaxUnknownFrameCount | read-create | current | C10 Maximum Unknown Frame Count. See the description of lecMaxUnknownFrameTime below. |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.11 | ColumnlecMaxUnknownFrameTime | read-create | current | C11 Maximum Unknown Frame Time. Within the period of time defined by the Maximum Unknown Frame Time, a LE Client will send no more than Maximum Unknown Frame C… |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.12 | ColumnlecVccTimeoutPeriod | read-create | current | C12 VCC Time-out Period. A LE Client SHOULD release any Data Direct VCC that it has not used to transmit or receive any data frames for the length of the VCC T… |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.13 | ColumnlecMaxRetryCount | read-create | current | C13 Maximum Retry Count. A LE CLient MUST not retry a LE_ARP_REQUEST for a given frame's LAN destination more than Maximum Retry Count times, after the first L… |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.14 | ColumnlecAgingTime | read-create | current | C17 Aging Time. The maximum time that a LE Client will maintain an entry in its LE_ARP cache in the absence of a verification of that relationship. This time v… |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.15 | ColumnlecForwardDelayTime | read-create | current | C18 Forward Delay Time. The maximum time that a LE Client will maintain an entry for a non-local MAC address in its LE_ARP cache in the absence of a verificati… |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.16 | ColumnlecExpectedArpResponseTime | read-create | current | C20 Expected LE_ARP Response Time. The maximum time that the LEC expects an LE_ARP_REQUEST/ LE_ARP_RESPONSE cycle to take. Used for retries and verifies. This … |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.17 | ColumnlecFlushTimeOut | read-create | current | C21 Flush Time-out. Time limit to wait to receive a LE_FLUSH_RESPONSE after the LE_FLUSH_REQUEST has been sent before taking recovery action. This time value i… |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.18 | ColumnlecPathSwitchingDelay | read-create | current | C22 Path Switching Delay. The time since sending a frame to the BUS after which the LE Client may assume that the frame has been either discarded or delivered … |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.19 | ColumnlecLocalSegmentID | read-create | current | C23 Local Segment ID. The segment ID of the emulated LAN. This is only required for IEEE 802.5 clients that are Source Routing bridges. |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.20 | ColumnlecMulticastSendType | read-create | current | C24 Multicast Send VCC Type. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. This is the method to be used … |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.21 | ColumnlecMulticastSendAvgRate | read-create | current | C25 Multicast Send VCC AvgRate. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. Forward and Backward Sustai… |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.22 | ColumnlecMulticastSendPeakRate | read-create | current | C26 Multicast Send VCC PeakRate. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. Forward and Backward Peak … |
| 1.3.6.1.4.1.353.5.3.1.1.1.1.23 | ColumnlecConnectionCompleteTimer | read-create | current | C28 Connection Complete Timer. Optional. In Connection Establishment this is the time period in which data or a READY_IND message is expected from a Calling Pa… |
| 1.3.6.1.4.1.353.5.3.1.1.2 | TablelecStatusTable | not-accessible | current | A read-only table containing identification, status, and operational information about the LAN Emulation Clients this agent manages. |
| 1.3.6.1.4.1.353.5.3.1.1.2.1 | RowlecStatusEntry | not-accessible | current | Each table entry contains information about one LAN Emulation Client. |
| 1.3.6.1.4.1.353.5.3.1.1.2.1.1 | ColumnlecIfIndex | read-only | current | This object identifies the logical interface number ('ifIndex') assigned to this client, and is used to identify corresponding rows in the Interfaces MIB. Note… |
| 1.3.6.1.4.1.353.5.3.1.1.2.1.2 | ColumnlecPrimaryAtmAddress | read-only | current | C1 LE Client's ATM Addresses. The primary ATM address of this LAN Emulation Client. This address is used to establish the Control Direct and Multicast Send VCC… |
| 1.3.6.1.4.1.353.5.3.1.1.2.1.3 | ColumnlecID | read-only | current | C14 LE Client Identifier. Each LE Client requires a LE Client Identifier (LECID) assigned by the LE Server during the Join phase. The LECID is placed in contro… |
| 1.3.6.1.4.1.353.5.3.1.1.2.1.4 | ColumnlecInterfaceState | read-only | current | The current state of the LAN Emulation Client. Note that 'ifOperStatus' is defined to be 'up' when, and only when, 'lecInterfaceState' is 'operational'. |
| 1.3.6.1.4.1.353.5.3.1.1.2.1.5 | ColumnlecLastFailureRespCode | read-only | current | Status code from the last failed Configure response or Join response. Failed responses are those for which the LE_CONFIGURE_RESPONSE / LE_JOIN_RESPONSE frame c… |
| 1.3.6.1.4.1.353.5.3.1.1.2.1.6 | ColumnlecLastFailureState | read-only | current | The state this client was in when it updated the 'lecLastFailureRespCode'. If 'lecLastFailureRespCode' is 'none', this object has the value initialState(1). |
| 1.3.6.1.4.1.353.5.3.1.1.2.1.7 | ColumnlecProtocol | read-only | current | The LAN Emulation protocol which this client supports, and specifies in its LE_JOIN_REQUESTs. |
| 1.3.6.1.4.1.353.5.3.1.1.2.1.8 | ColumnlecVersion | read-only | current | The LAN Emulation protocol version which this client supports, and specifies in its LE_JOIN_REQUESTs. |
| 1.3.6.1.4.1.353.5.3.1.1.2.1.9 | ColumnlecTopologyChange | read-only | current | C19 Topology Change. Boolean indication that the LE Client is using the Forward Delay Time C18, instead of the Aging Time C17, to age non-local entries in its … |
| 1.3.6.1.4.1.353.5.3.1.1.2.1.10 | ColumnlecConfigServerAtmAddress | read-only | current | The ATM address of the LAN Emulation Configuration Server (if known) or the empty string (otherwise). |
| 1.3.6.1.4.1.353.5.3.1.1.2.1.11 | ColumnlecConfigSource | read-only | current | Indicates whether this LAN Emulation Client used the LAN Emulation Configuration Server, and, if so, what method it used to establish the Configuration Direct … |
| 1.3.6.1.4.1.353.5.3.1.1.2.1.12 | ColumnlecActualLanType | read-only | current | C2 LAN Type. The data frame format that this LAN Emulation Client is using right now. This may come from * lecConfigLanType, * the LAN Emulation Configuration … |
| 1.3.6.1.4.1.353.5.3.1.1.2.1.13 | ColumnlecActualMaxDataFrameSize | read-only | current | C3 Maximum Data Frame Size. The maximum data frame size that this LAN Emulation client is using right now. This may come from * lecConfigMaxDataFrameSize, * th… |
| 1.3.6.1.4.1.353.5.3.1.1.2.1.14 | ColumnlecActualLanName | read-only | current | C5 ELAN Name. The identity of the emulated LAN which this client last joined, or wishes to join. This may come from * lecConfigLanName, * the LAN Emulation Con… |
| 1.3.6.1.4.1.353.5.3.1.1.2.1.15 | ColumnlecActualLesAtmAddress | read-only | current | C9 LE Server ATM Address. The LAN Emulation Server address currently in use or most recently attempted. If no LAN Emulation Server attachment has been tried, t… |
| 1.3.6.1.4.1.353.5.3.1.1.2.1.16 | ColumnlecProxyClient | read-only | current | C4 Proxy. Indicates whether this client is acting as a proxy. Proxy clients are allowed to represent unregistered MAC addresses, and receive copies of LE_ARP_R… |
| 1.3.6.1.4.1.353.5.3.1.1.3 | TablelecMappingTable | not-accessible | current | A table mapping the 'ifIndex' values of 'aflane8023' and 'aflane8025' interfaces to the 'lecIndex' values of the corresponding LAN Emulation Clients. |
| 1.3.6.1.4.1.353.5.3.1.1.3.1 | RowlecMappingEntry | not-accessible | current | |
| 1.3.6.1.4.1.353.5.3.1.1.3.1.1 | ColumnlecMappingIndex | read-only | current | The 'lecIndex' of the client which implements the specified interface. |
| 1.3.6.1.4.1.353.5.3.1.1.4 | TablelecStatisticsTable | not-accessible | current | An extension table containing traffic statistics for all the LAN Emulation Clients this host implements. |
| 1.3.6.1.4.1.353.5.3.1.1.4.1 | RowlecStatisticsEntry | not-accessible | current | Each row in this table contains traffic statistics for one LAN Emulation client. |
| 1.3.6.1.4.1.353.5.3.1.1.4.1.1 | ColumnlecArpRequestsOut | read-only | current | The number of LE_ARP_REQUESTs sent over the LUNI by this LAN Emulation Client. |
| 1.3.6.1.4.1.353.5.3.1.1.4.1.2 | ColumnlecArpRequestsIn | read-only | current | The number of LE_ARP_REQUESTs received over the LUNI by this LAN Emulation Client. Requests may arrive on the Control Direct VCC or on the Control Distribute V… |
| 1.3.6.1.4.1.353.5.3.1.1.4.1.3 | ColumnlecArpRepliesOut | read-only | current | The number of LE_ARP_RESPONSEs sent over the LUNI by this LAN Emulation Client. |
| 1.3.6.1.4.1.353.5.3.1.1.4.1.4 | ColumnlecArpRepliesIn | read-only | current | The number of LE_ARP_RESPONSEs received over the LUNI by this LAN Emulation Client. This count includes all such replies, whether solicited or not. Replies may… |
| 1.3.6.1.4.1.353.5.3.1.1.4.1.5 | ColumnlecControlFramesOut | read-only | current | The total number of control packets sent by this LAN Emulation Client over the LUNI. |
| 1.3.6.1.4.1.353.5.3.1.1.4.1.6 | ColumnlecControlFramesIn | read-only | current | The total number of control packets received by this LAN Emulation Client over the LUNI. |
| 1.3.6.1.4.1.353.5.3.1.1.4.1.7 | ColumnlecSvcFailures | read-only | current | The total number of * outgoing LAN Emulation SVCs which this client tried, but failed, to open; * incoming LAN Emulation SVCs which this client tried, but fail… |
| 1.3.6.1.4.1.353.5.3.1.1.5 | TablelecServerVccTable | not-accessible | current | A table identifying the Control and Multicast VCCs for each LAN Emulation Client this host implements. |
| 1.3.6.1.4.1.353.5.3.1.1.5.1 | RowlecServerVccEntry | not-accessible | current | Each row in this table describes the Control VCCs and Multicast VCCs for one LAN Emulation client. |
| 1.3.6.1.4.1.353.5.3.1.1.5.1.1 | ColumnlecConfigDirectInterface | read-only | current | The interface associated with the Configuration Direct VCC. If no Configuration Direct VCC exists, this object has the value 0. Otherwise, the objects ( lecCon… |
| 1.3.6.1.4.1.353.5.3.1.1.5.1.2 | ColumnlecConfigDirectVpi | read-only | current | If the Configuration Direct VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, thi… |
| 1.3.6.1.4.1.353.5.3.1.1.5.1.3 | ColumnlecConfigDirectVci | read-only | current | If the Configuration Direct VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, thi… |
| 1.3.6.1.4.1.353.5.3.1.1.5.1.4 | ColumnlecControlDirectInterface | read-only | current | The interface associated with the Control Direct VCC. If no Control Direct VCC exists, this object has the value 0. Otherwise, the objects ( lecControlDirectIn… |
| 1.3.6.1.4.1.353.5.3.1.1.5.1.5 | ColumnlecControlDirectVpi | read-only | current | If the Control Direct VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this obje… |
| 1.3.6.1.4.1.353.5.3.1.1.5.1.6 | ColumnlecControlDirectVci | read-only | current | If the Control Direct VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this obje… |
| 1.3.6.1.4.1.353.5.3.1.1.5.1.7 | ColumnlecControlDistributeInterface | read-only | current | The interface associated with the Control Distribute VCC. If no Control Distribute VCC has been set up to this client, this object has the value 0. Otherwise, … |
| 1.3.6.1.4.1.353.5.3.1.1.5.1.8 | ColumnlecControlDistributeVpi | read-only | current | If the Control Distribute VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this … |
| 1.3.6.1.4.1.353.5.3.1.1.5.1.9 | ColumnlecControlDistributeVci | read-only | current | If the Control Distribute VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this … |
| 1.3.6.1.4.1.353.5.3.1.1.5.1.10 | ColumnlecMulticastSendInterface | read-only | current | The interface associated with the Multicast Send VCC. If no Multicast Send VCC exists, this object has the value 0. Otherwise, the objects ( lecMulticastSendIn… |
| 1.3.6.1.4.1.353.5.3.1.1.5.1.11 | ColumnlecMulticastSendVpi | read-only | current | If the Multicast Send VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this obje… |
| 1.3.6.1.4.1.353.5.3.1.1.5.1.12 | ColumnlecMulticastSendVci | read-only | current | If the Multicast Send VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this obje… |
| 1.3.6.1.4.1.353.5.3.1.1.5.1.13 | ColumnlecMulticastForwardInterface | read-only | current | The interface associated with the Multicast Forward VCC. If no Multicast Forward VCC has been set up to this client, this object has the value 0. Otherwise, th… |
| 1.3.6.1.4.1.353.5.3.1.1.5.1.14 | ColumnlecMulticastForwardVpi | read-only | current | If the Multicast Forward VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this o… |
| 1.3.6.1.4.1.353.5.3.1.1.5.1.15 | ColumnlecMulticastForwardVci | read-only | current | If the Multicast Forward VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this o… |
| 1.3.6.1.4.1.353.5.3.1.1.6 | TablelecAtmAddressTable | not-accessible | current | A table listing all of the ATM addresses belonging to this host's LAN Emulation Clients. |
| 1.3.6.1.4.1.353.5.3.1.1.6.1 | RowlecAtmAddressEntry | not-accessible | current | Each row in this table describes one of a client's ATM addresses. |
| 1.3.6.1.4.1.353.5.3.1.1.6.1.1 | ColumnlecAtmAddress | not-accessible | current | The ATM address this row describes. This could be either a primary address or a secondary address. |
| 1.3.6.1.4.1.353.5.3.1.1.6.1.2 | ColumnlecAtmAddressStatus | read-create | current | Used to create and delete rows in this table. A management station may not change the status of a primary ATM address to 'notInService' or 'destroy' unless the… |
| 1.3.6.1.4.1.353.5.3.1.1.7 | TablelecMacAddressTable | not-accessible | current | This table contains entries for all of the registered MAC addresses belonging to this agent's LE clients. C6 Local Unicast MAC Address(es). Each LE Client has … |
| 1.3.6.1.4.1.353.5.3.1.1.7.1 | RowlecMacAddressEntry | not-accessible | current | Each table row describes a (MAC address, ATM address) pair registered for a particular client. |
| 1.3.6.1.4.1.353.5.3.1.1.7.1.1 | ColumnlecMacAddress | not-accessible | current | A unicast MAC address which the LE client denoted by 'lecIndex' has registered with its LE Server. |
| 1.3.6.1.4.1.353.5.3.1.1.7.1.2 | ColumnlecMacAddressAtmBinding | read-only | current | The ATM address registered for 'lecMacAddress'. |
| 1.3.6.1.4.1.353.5.3.1.1.8 | TablelecRouteDescrTable | not-accessible | current | This table lists all of the Route Descriptors which are registered by this host's LAN Emulation Clients. C8 Route Descriptor(s). Route Descriptors exist only f… |
| 1.3.6.1.4.1.353.5.3.1.1.8.1 | RowlecRouteDescrEntry | not-accessible | current | Each table row describes a (Route Descriptor, ATM address) pair registered for a particular client. |
| 1.3.6.1.4.1.353.5.3.1.1.8.1.1 | ColumnlecRouteDescrSegmentID | not-accessible | current | The LAN ID portion of the IEEE 802.5 route descriptor associated with this conceptual row. |
| 1.3.6.1.4.1.353.5.3.1.1.8.1.2 | ColumnlecRouteDescrBridgeNumber | not-accessible | current | The Bridge Number portion of the IEEE 802.5 route descriptor associated with this conceptual row. |
| 1.3.6.1.4.1.353.5.3.1.1.8.1.3 | ColumnlecRouteDescrAtmBinding | read-only | current | The ATM address registered for the IEEE 802.5 route descriptor ('lecRouteDescrSegmentID', 'lecRouteDescrBridgeNumber'). |
| 1.3.6.1.4.1.353.5.3.1.1.9 | TableleArpTable | not-accessible | current | This table provides access to an ATM LAN Emulation Client's MAC-to-ATM ARP cache. It contains entries for unicast addresses and for the broadcast address, but … |
| 1.3.6.1.4.1.353.5.3.1.1.9.1 | RowleArpEntry | not-accessible | current | An ATM LAN Emulation ARP cache entry containing information about the binding of one MAC address to one ATM address. |
| 1.3.6.1.4.1.353.5.3.1.1.9.1.1 | ColumnleArpMacAddress | not-accessible | current | The MAC address for which this cache entry provides a translation. Since ATM LAN Emulation uses an ARP protocol to locate the Broadcast and Unknown Server, the… |
| 1.3.6.1.4.1.353.5.3.1.1.9.1.2 | ColumnleArpAtmAddress | read-create | current | The ATM address of the Broadcast & Unknown Server or LAN Emulation Client whose MAC address is stored in 'leArpMacAddress'. This value may be determined throug… |
| 1.3.6.1.4.1.353.5.3.1.1.9.1.3 | ColumnleArpIsRemoteAddress | read-only | current | Indicates whether this entry is for a local or remote MAC address. In this context, 'local' means 'a MAC address that is local to the remote client', as oppose… |
| 1.3.6.1.4.1.353.5.3.1.1.9.1.4 | ColumnleArpEntryType | read-create | current | Indicates how this LE_ARP table entry was created and whether it is aged. |
| 1.3.6.1.4.1.353.5.3.1.1.9.1.5 | ColumnleArpRowStatus | read-create | current | Lets users create and delete LE_ARP cache entries, on systems that support this capability. Normally clients will maintain their LE_ARP caches automatically. H… |
| 1.3.6.1.4.1.353.5.3.1.1.10 | TableleRDArpTable | not-accessible | current | This table provides access to an ATM LAN Emulation Client's Route Descriptor-to-ATM ARP cache. Implementation of this table is optional for hosts that do not s… |
| 1.3.6.1.4.1.353.5.3.1.1.10.1 | RowleRDArpEntry | not-accessible | current | An ATM LAN Emulation ARP cache entry containing information about the binding of one IEEE 802.5 route descriptor to one ATM address. |
| 1.3.6.1.4.1.353.5.3.1.1.10.1.1 | ColumnleRDArpSegmentID | not-accessible | current | The LAN ID portion of the IEEE 802.5 route descriptor associated with this ARP cache entry. |
| 1.3.6.1.4.1.353.5.3.1.1.10.1.2 | ColumnleRDArpBridgeNumber | not-accessible | current | The Bridge Number portion of the IEEE 802.5 route descriptor associated with this ARP cache entry. |
| 1.3.6.1.4.1.353.5.3.1.1.10.1.3 | ColumnleRDArpAtmAddress | read-create | current | The ATM address of the LAN Emulation Client which is associated with the route descriptor ('leRDArpSegmentID', 'leRDArpBridgeNumber'). This value may be determ… |
| 1.3.6.1.4.1.353.5.3.1.1.10.1.4 | ColumnleRDArpEntryType | read-create | current | Indicates how this LE_ARP table entry was created and whether it is aged. |
| 1.3.6.1.4.1.353.5.3.1.1.10.1.5 | ColumnleRDArpRowStatus | read-create | current | Lets users create and delete LE_ARP cache entries, on systems that support this capability. Normally clients will maintain their LE_ARP caches automatically. H… |
| 1.3.6.1.4.1.353.5.3.1.2 | NodeleClientMIBConformance | |||
| 1.3.6.1.4.1.353.5.3.1.2.1 | NodeleClientMIBGroups | |||
| 1.3.6.1.4.1.353.5.3.1.2.1.1 | GroupleClientConfigGroup | current | A collection of objects used for creating and configuring LAN Emulation Clients. | |
| 1.3.6.1.4.1.353.5.3.1.2.1.2 | GroupleClientStatusGroup | current | A collection of objects describing the status and operational parameters of the managed LAN Emulation Clients. | |
| 1.3.6.1.4.1.353.5.3.1.2.1.3 | GroupleClientMappingGroup | current | A collection of objects which map a LAN Emulation Client's 'ifIndex' to its 'lecIndex'. | |
| 1.3.6.1.4.1.353.5.3.1.2.1.4 | GroupleClientStatisticsGroup | current | A collection of objects which act as an extension to the lecConfigTable. These objects provide statistics on LAN Emulation control traffic and SVC establishmen… | |
| 1.3.6.1.4.1.353.5.3.1.2.1.5 | GroupleClientServerVccGroup | current | A collection of objects which act as an extension to the lecConfigTable. These objects identify Configuration Direct, Control, and Multicast VCCs for each clie… | |
| 1.3.6.1.4.1.353.5.3.1.2.1.6 | GroupleClientAtmAddressesGroup | current | A collection of objects which describe all of the ATM addresses belonging to each client. | |
| 1.3.6.1.4.1.353.5.3.1.2.1.7 | GroupleClientMacAddressesGroup | current | A collection of objects which describe all of the MAC addresses registered for each client. | |
| 1.3.6.1.4.1.353.5.3.1.2.1.8 | GroupleClientRouteDescriptorsGroup | current | A collection of objects which describe all of the Route Descriptors registered for each client. | |
| 1.3.6.1.4.1.353.5.3.1.2.1.9 | GroupleClientArpGroup | current | A collection of objects which describe the MAC- to-ATM address mappings that this LAN Emulation Client has learned. | |
| 1.3.6.1.4.1.353.5.3.1.2.1.10 | GroupleClientRDArpGroup | current | A collection of objects which describe the IEEE 802.5 Route Descriptor-to-ATM address mappings that this LAN Emulation Client has learned. | |
| 1.3.6.1.4.1.353.5.3.1.2.2 | NodeleClientMIBCompliances | |||
| 1.3.6.1.4.1.353.5.3.1.2.2.1 | ComplianceleClientMIBCompliance | read-only | current | The compliance statement for SNMP entities which support ATM LAN Emulation Clients. For a host to conform to this MIB, it must also implement - RFC 1213 - MIB … |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AtmLaneAddress | OCTET STRING ( SIZE( 0 | 20 ) ) | current | A twenty-octet binary string, containing a standard ATM Forum address indicating the absence of an address. For LAN Emulation purposes, the eight-octet address format is not used. |
| LeArpTableEntryType | INTEGER { other(1), learnedViaControl(2), learnedViaData(3), staticVolatile(4), staticNonVolatile(5) } | current | Indicates how a LE_ARP table entry was created and whether it is subject to aging. other(1) The LE_ARP entry does not fall into one of the categories defined below. learnedViaControl(2) This LE_ARP entry was learned by … |
| LecDataFrameFormat | INTEGER { unspecified(1), aflane8023(2), aflane8025(3) } | current | A 'LAN Type' value. C2 LAN Type. The type of LAN that the LE Client is, or wishes to become, a member of. This MUST be one of Ethernet/IEEE 802.3, IEEE 802.5, or Unspecified. |
| LecDataFrameSize | INTEGER { unspecified(1), max1516(2), max4544(3), max9234(4), max18190(5) } | current | A 'Maximum Data Frame Size' value. C3 Maximum Data Frame Size. The maximum AAL-5 SDU size of a data frame that the LE Client wishes to send on the Multicast Send VCC or to receive on the Multicast Send VCC or Multicast … |
| LeConnectionInterface | INTEGER ( 0..2147483647 ) | current | A combination flag and ifTable index, indicating whether a LAN Emulation circuit exists - and, if so, which interface is associated with it at the point where it connects to a LE Client. Objects of this type are always … |
| LecState | INTEGER { initialState(1), lecsConnect(2), configure(3), join(4), initialRegistration(5), busConnect(6), operational(7) } | current | An official protocol state of a LAN Emulation Client. |
| VciInteger | INTEGER ( 0..65535 ) | current | An integer large enough to hold a VCI. |
| VpiInteger | INTEGER ( 0..255 ) | current | An integer large enough to hold a VPI. |