LAN-MODULE2
35 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises Gauge IpAddress TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.17095 | Nodelan-module | |||
| 1.3.6.1.4.1.17095.1 | Nodeproduct | |||
| 1.3.6.1.4.1.17095.1.1 | Scalarname | read-write | mandatory | Name of product. e.g. LAN-Kontroler |
| 1.3.6.1.4.1.17095.1.2 | Scalarversion | read-only | mandatory | Version string. e.g. 2.0 |
| 1.3.6.1.4.1.17095.1.3 | Scalardate | read-only | mandatory | Date of version |
| 1.3.6.1.4.1.17095.2 | Nodesetup | |||
| 1.3.6.1.4.1.17095.2.1 | Tabletraps | not-accessible | mandatory | Trap table |
| 1.3.6.1.4.1.17095.2.1.1 | RowtrapEntry | not-accessible | mandatory | Single trap entry containing trap receiver info. |
| 1.3.6.1.4.1.17095.2.1.1.1 | ColumntrapReceiverNumber | not-accessible | mandatory | Index of trap receiver |
| 1.3.6.1.4.1.17095.2.1.1.2 | ColumntrapEnabled | read-write | mandatory | Indicates if this trap entry is enabled or not. |
| 1.3.6.1.4.1.17095.2.1.1.3 | ColumntrapReceiverIPAddress | read-write | mandatory | Trap receiver IP address |
| 1.3.6.1.4.1.17095.2.1.1.4 | ColumntrapCommunity | read-write | mandatory | Trap community to be used by agent to send trap |
| 1.3.6.1.4.1.17095.3 | Nodecontrol | |||
| 1.3.6.1.4.1.17095.3.1 | Scalarout0 | read-write | mandatory | OUT0 output set or read |
| 1.3.6.1.4.1.17095.3.2 | Scalarout1 | read-write | mandatory | OUT1 output set or red |
| 1.3.6.1.4.1.17095.3.3 | Scalarout2 | read-write | mandatory | OUT2 output set or red |
| 1.3.6.1.4.1.17095.3.4 | Scalarout3 | read-write | mandatory | OUT3 output set or red |
| 1.3.6.1.4.1.17095.3.5 | Scalarout4 | read-write | mandatory | OUT4 output set or red |
| 1.3.6.1.4.1.17095.3.6 | Scalartemp | read-only | mandatory | Temp value: Air temperature around board |
| 1.3.6.1.4.1.17095.3.7 | Scalarvcc | read-only | mandatory | VCC value: Input VCC supplay board |
| 1.3.6.1.4.1.17095.3.8 | Scalarinp1 | read-only | mandatory | Inp1 value: temperature from NTC10 or voltage |
| 1.3.6.1.4.1.17095.3.9 | Scalarinp2 | read-only | mandatory | Inp2 value: temperature from NTC10 or KTY-84 |
| 1.3.6.1.4.1.17095.3.10 | Scalarinp3 | read-only | mandatory | Inp3 value: voltage max 35V DC |
| 1.3.6.1.4.1.17095.3.11 | Scalarinp4 | read-only | mandatory | Inp4 value: temperature from PT1000 or PT1000 conected to Solar System Controller |
| 1.3.6.1.4.1.17095.3.12 | Scalarinp5 | read-only | mandatory | Inp5 value: DC current, max 3A |
| 1.3.6.1.4.1.17095.3.13 | Scalarinp6 | read-only | mandatory | Inp6 value: temperature from DS18B20 |
| 1.3.6.1.4.1.17095.3.14 | Scalarinp7 | read-only | mandatory | Inp6 value: temperature from DS18B20 |
| 1.3.6.1.4.1.17095.3.15 | Scalarinp8 | read-only | mandatory | Inp6 value: temperature from DS18B20 |
| 1.3.6.1.4.1.17095.3.16 | Scalarinp9 | read-only | mandatory | Inp6 value: temperature from DS18B20 |
| 1.3.6.1.4.1.17095.3.17 | Scalari3xi5 | read-only | mandatory | I3xI5 value: Power[W] from Input3 [V] and Input5[A] |
| 1.3.6.1.4.1.17095.3.18 | ScalarPxt | read-only | mandatory | Pxt value: Energy[Wh] from Input3 and Input5 |
| 1.3.6.1.4.1.17095.3.19 | Scalarinp1Digital | read-only | mandatory | INP1D Digital state |
| 1.3.6.1.4.1.17095.3.20 | Scalarinp2Digital | read-only | mandatory | INP2D Digital state |
| 1.3.6.1.4.1.17095.3.21 | Scalarinp3Digital | read-only | mandatory | INP3D Digital state |
| 1.3.6.1.4.1.17095.3.22 | Scalarinp4Digital | read-only | mandatory | INP4D Digital state |