LANCOM-ES-2126-MIB

430 objects

The MIB module is for LANCOM Systems

Imported Objects

RFC1213-MIB	ifIndex
SNMPv2-CONF	MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI	Counter32 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TC	DisplayString

OID	Name	Access	Status	Description
1.3.6.1.4.1.2356	IdentitylancomSystems			The MIB module is for LANCOM Systems
1.3.6.1.4.1.2356.800	NodeswitchingSystems
1.3.6.1.4.1.2356.800.2	NodefastEthernetSwitches
1.3.6.1.4.1.2356.800.2.2126	NodelancomES2126
1.3.6.1.4.1.2356.800.2.2126.1	Nodees2126Produces
1.3.6.1.4.1.2356.800.2.2126.1.1	Nodees2126System
1.3.6.1.4.1.2356.800.2.2126.1.1.1	Nodees2126CommonSys
1.3.6.1.4.1.2356.800.2.2126.1.1.1.1	Scalares2126Reboot	read-write	current	Reboot the system. Get this OID always return zero. 0 - do nothing 1 - Reboot without saving start 2 - Reboot with saving start
1.3.6.1.4.1.2356.800.2.2126.1.1.1.2	Scalares2126BiosVsersion	read-only	current	Get the BIOS version of the system.
1.3.6.1.4.1.2356.800.2.2126.1.1.1.3	Scalares2126FirmwareVersion	read-only	current	Get the firmware version of the system.
1.3.6.1.4.1.2356.800.2.2126.1.1.1.4	Scalares2126HardwareVersion	read-only	current	Get the hardware version of the system.
1.3.6.1.4.1.2356.800.2.2126.1.1.1.5	Scalares2126MechanicalVersion	read-only	current	Get the mechanical version of the system.
1.3.6.1.4.1.2356.800.2.2126.1.1.1.6	Scalares2126SerialNumber	read-only	current	Get the Serial number of the system.
1.3.6.1.4.1.2356.800.2.2126.1.1.1.7	Scalares2126HostMacAddress	read-only	current	Get the MAC address of the system.
1.3.6.1.4.1.2356.800.2.2126.1.1.1.8	Scalares2126DevicePort	read-only	current	Get the quantity of ports that this system owns now.
1.3.6.1.4.1.2356.800.2.2126.1.1.1.9	Scalares2126RamSize	read-only	current	Get the RAM size of the system.
1.3.6.1.4.1.2356.800.2.2126.1.1.1.10	Scalares2126FlashSize	read-only	current	Get the flash size of the system.
1.3.6.1.4.1.2356.800.2.2126.1.1.1.11	Scalares2126SystemDescription	read-only	current	Get the system description.
1.3.6.1.4.1.2356.800.2.2126.1.1.1.12	Scalares2126DeviceName	read-write	current	Get/Set the device Name.
1.3.6.1.4.1.2356.800.2.2126.1.1.2	Nodees2126IP
1.3.6.1.4.1.2356.800.2.2126.1.1.2.1	Scalares2126DhcpSetting	read-write	current	Get/Set DHCP status of the system. 0 - DHCP disable 1 - DHCP enable
1.3.6.1.4.1.2356.800.2.2126.1.1.2.2	Scalares2126IPAddress	read-write	current	Get/Set the IP address of the system. You can't set this OID if DHCP status is enabled.
1.3.6.1.4.1.2356.800.2.2126.1.1.2.3	Scalares2126NetMask	read-write	current	Get/Set the subnet mask of the system. You can't set this OID if DHCP status is enabled.
1.3.6.1.4.1.2356.800.2.2126.1.1.2.4	Scalares2126DefaultGateway	read-write	current	Get/Set the default gateway of the system. You can't set this OID if DHCP status is enabled.
1.3.6.1.4.1.2356.800.2.2126.1.1.2.5	Scalares2126DnsSetting	read-write	current	Get/Set the source of DNS server. You can't set this OID if DHCP status is disabled. 0 - manual, the DNS server is from manual setting 1 - Auto, the DNS server…
1.3.6.1.4.1.2356.800.2.2126.1.1.2.6	Scalares2126DnsServer	read-write	current	Get/Set the DNS server of the system.
1.3.6.1.4.1.2356.800.2.2126.1.1.3	Nodees2126Time
1.3.6.1.4.1.2356.800.2.2126.1.1.3.1	Scalares2126SystemCurrentTime	read-only	current	Get the current time of the system.
1.3.6.1.4.1.2356.800.2.2126.1.1.3.2	Scalares2126ManualTimeSetting	read-write	current	Get/Set the system time of the device. The input format is 'Year/Month/Day/Hour/Minute/Second'. Ex: 2004/1/1/12/34/25 means 2004/1/1 - 12:24:25. Value range: Y…
1.3.6.1.4.1.2356.800.2.2126.1.1.3.3	Scalares2126NTPServer	read-write	current	Get/Set the NTP Time Server. You can use the IP address or domain name.
1.3.6.1.4.1.2356.800.2.2126.1.1.3.4	Scalares2126NTPTimeZone	read-write	current	Get/Set the NTP Time Zone. Value range is between -12 and 13 -12 - GMT -12:00, -11 - GMT -11:00, -10 - GMT -10:00, -9 - GMT -09:00, -8 - GMT -08:00, -7 - GMT -…
1.3.6.1.4.1.2356.800.2.2126.1.1.3.5	Scalares2126NTPTimeSync	read-write	current	Sync time from NTP Server. Get this OID always return zero. Set the Time Server and Time Zone before doing time sync. Notice that time server must be correct! …
1.3.6.1.4.1.2356.800.2.2126.1.1.3.6	Scalares2126DaylightSavingTime	read-write	current	Get/Set the daylight saving time. Value range is between -5 and 5. Unit: hour.
1.3.6.1.4.1.2356.800.2.2126.1.1.3.7	Scalares2126DaylightStartTime	read-write	current	Get/Set the Start time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. Example: month/day/hour 10/01…
1.3.6.1.4.1.2356.800.2.2126.1.1.3.8	Scalares2126DaylightEndTime	read-write	current	Get/Set the End time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. Example: month/day/hour 04/01/0…
1.3.6.1.4.1.2356.800.2.2126.1.1.4	Nodees2126Account
1.3.6.1.4.1.2356.800.2.2126.1.1.4.1	Scalares2126AccountNumber	read-only	current	Get the current account number(s) of the system.
1.3.6.1.4.1.2356.800.2.2126.1.1.4.2	Tablees2126AccountTable	not-accessible	current	This is a list of es2126AccountEntry. The numbers of entries are given by the value of es2126AccountNumber.
1.3.6.1.4.1.2356.800.2.2126.1.1.4.2.1	Rowes2126AccountEntry	not-accessible	current	This is the Entry(s) for account information.
1.3.6.1.4.1.2356.800.2.2126.1.1.4.2.1.1	Columnes2126AccountIndex	read-only	current	This is the index of the account entry.
1.3.6.1.4.1.2356.800.2.2126.1.1.4.2.1.2	Columnes2126AccountAuthorization	read-only	current	This is the authorization of the account entry.
1.3.6.1.4.1.2356.800.2.2126.1.1.4.2.1.3	Columnes2126AccountName	read-write	current	This is the username of the account entry.
1.3.6.1.4.1.2356.800.2.2126.1.1.4.2.1.4	Columnes2126AccountPassword	read-write	current	This is the password of the account entry. The return value is always '********'.
1.3.6.1.4.1.2356.800.2.2126.1.1.4.3	Scalares2126AccountAddName	read-write	current	This is the account name for adding operation.
1.3.6.1.4.1.2356.800.2.2126.1.1.4.4	Scalares2126AccountAddPassword	read-write	current	This is the account password for adding operation. The return value is always '********'.
1.3.6.1.4.1.2356.800.2.2126.1.1.4.5	Scalares2126DoAccountAdd	read-write	current	Add account name. OID es2126AccountAddName and es2126AccountAddPassword must be filled first. Get this OID always return zero. 1 - Add account. 0 - do nothing.
1.3.6.1.4.1.2356.800.2.2126.1.1.4.6	Scalares2126AccountDel	read-write	current	Delete account. The value is valid es2126AccountIndex(Can't delete administrator).
1.3.6.1.4.1.2356.800.2.2126.1.2	Nodees2126Snmp
1.3.6.1.4.1.2356.800.2.2126.1.2.1	Scalares2126GetCommunity	read-write	current	Get/Set the get-community of the SNMP.
1.3.6.1.4.1.2356.800.2.2126.1.2.2	Scalares2126SetCommunity	read-write	current	Get/Set the set-community of the SNMP.
1.3.6.1.4.1.2356.800.2.2126.1.2.3	Scalares2126TrapHostNumber	read-only	current	Get the number of trap hosts.
1.3.6.1.4.1.2356.800.2.2126.1.2.4	Tablees2126TrapHostTable	not-accessible	current	This is a list of trap host entry. The numbers of entries are given by the value of es2126TrapHostNumber.
1.3.6.1.4.1.2356.800.2.2126.1.2.4.1	Rowes2126TrapHostEntry	not-accessible	current	This is the Entry Information for trap host.
1.3.6.1.4.1.2356.800.2.2126.1.2.4.1.1	Columnes2126TrapHostIndex	read-only	current	The index of the trap host entry.
1.3.6.1.4.1.2356.800.2.2126.1.2.4.1.2	Columnes2126TrapHostIP	read-write	current	This is the IP of the trap host.
1.3.6.1.4.1.2356.800.2.2126.1.2.4.1.3	Columnes2126TrapHostPort	read-write	current	This is the receiving-port number of the trap host.
1.3.6.1.4.1.2356.800.2.2126.1.2.4.1.4	Columnes2126TrapHostCommunity	read-write	current	The community name for the trap PDU.
1.3.6.1.4.1.2356.800.2.2126.1.2.5	Scalares2126RegisterMonitor	read-write	current	Register-Monitor
1.3.6.1.4.1.2356.800.2.2126.1.2.6	Scalares2126DeleteMonitor	read-write	current	Delete-Monitor
1.3.6.1.4.1.2356.800.2.2126.1.2.7	Tablees2126MonitorTable	not-accessible	current	Monitor-Table
1.3.6.1.4.1.2356.800.2.2126.1.2.7.1	Rowes2126MonitorEntry	not-accessible	current	entry in table
1.3.6.1.4.1.2356.800.2.2126.1.2.7.1.1	Columnes2126MonitorTableIp	read-only	current	IP-Address
1.3.6.1.4.1.2356.800.2.2126.1.2.7.1.2	Columnes2126MonitorTableMac	read-only	current	MAC-Address
1.3.6.1.4.1.2356.800.2.2126.1.2.8	Scalares2126TrapBootDelayTime	read-write	current	Get/Set trap boot delay time in second. Default: 0
1.3.6.1.4.1.2356.800.2.2126.1.3	Nodees2126Alarm
1.3.6.1.4.1.2356.800.2.2126.1.3.1	Nodees2126Event
1.3.6.1.4.1.2356.800.2.2126.1.3.1.1	Scalares2126EventNumber	read-only	current	Get the total number of alarm events.
1.3.6.1.4.1.2356.800.2.2126.1.3.1.2	Tablees2126EventTable	not-accessible	current	This is a list of alarm event entry. The numbers of entries are given by the value of es2126EventNumber.
1.3.6.1.4.1.2356.800.2.2126.1.3.1.2.1	Rowes2126EventEntry	not-accessible	current	This is the entry information for alarm event.
1.3.6.1.4.1.2356.800.2.2126.1.3.1.2.1.1	Columnes2126EventIndex	read-only	current	This is the index of the alarm event entry.
1.3.6.1.4.1.2356.800.2.2126.1.3.1.2.1.2	Columnes2126EventName	read-only	current	This is the alarm event name.
1.3.6.1.4.1.2356.800.2.2126.1.3.1.2.1.3	Columnes2126EventSendEmail	read-write	current	Send email when alarm event is triggered.
1.3.6.1.4.1.2356.800.2.2126.1.3.1.2.1.4	Columnes2126EventSendTrap	read-write	current	Send trap when alarm event is triggered.
1.3.6.1.4.1.2356.800.2.2126.1.3.2	Nodees2126Email
1.3.6.1.4.1.2356.800.2.2126.1.3.2.1	Scalares2126EmailServer	read-write	current	This is the SMTP server for alarm event.
1.3.6.1.4.1.2356.800.2.2126.1.3.2.2	Scalares2126EmailUsername	read-write	current	This is the Username of SMTP server.
1.3.6.1.4.1.2356.800.2.2126.1.3.2.3	Scalares2126EmailPassword	read-write	current	This is the User Password of SMTP server.
1.3.6.1.4.1.2356.800.2.2126.1.3.2.4	Scalares2126EmailSender	read-write	current	This is the Sender of SMTP server.
1.3.6.1.4.1.2356.800.2.2126.1.3.2.5	Scalares2126EmailReturnPath	read-write	current	This is the return path of mail.
1.3.6.1.4.1.2356.800.2.2126.1.3.2.6	Scalares2126EmailUserNumber	read-only	current	The number of the email users that you want to send the alarm notification.
1.3.6.1.4.1.2356.800.2.2126.1.3.2.7	Tablees2126EmailUserTable	not-accessible	current	This is a list of email user entry. The numbers of entries are given by the value of es2126EmailUserNumber.
1.3.6.1.4.1.2356.800.2.2126.1.3.2.7.1	Rowes2126EmailUserEntry	not-accessible	current	This is the Entry information for email user entry.
1.3.6.1.4.1.2356.800.2.2126.1.3.2.7.1.1	Columnes2126EmailUserIndex	read-only	current	This is the index of the email user entry.
1.3.6.1.4.1.2356.800.2.2126.1.3.2.7.1.2	Columnes2126EmailUserAddress	read-write	current	This is the email address of the email user entry.
1.3.6.1.4.1.2356.800.2.2126.1.4	Nodees2126Tftp
1.3.6.1.4.1.2356.800.2.2126.1.4.1	Scalares2126RemoteTftpServer	read-write	current	Get/Set the remote tftp server.
1.3.6.1.4.1.2356.800.2.2126.1.4.2	Scalares2126InternalTftpServerState	read-write	current	Get/Set internal tftp server state. 0 : Disable 1 : Enable
1.3.6.1.4.1.2356.800.2.2126.1.5	Nodees2126Configuration
1.3.6.1.4.1.2356.800.2.2126.1.5.1	Nodees2126SaveRestore
1.3.6.1.4.1.2356.800.2.2126.1.5.1.1	Scalares2126SaveStart	read-write	current	Save current configuration into flash memory (Save as Start Configuration). Get this OID always return zero. 1 - Save. 0 - do nothing.
1.3.6.1.4.1.2356.800.2.2126.1.5.1.2	Scalares2126SaveUser	read-write	current	Save current configuration into flash memory (Save as User Configuration). Get this OID always return zero. 1 - Save. 0 - do nothing.
1.3.6.1.4.1.2356.800.2.2126.1.5.1.3	Scalares2126RestoreDefault	read-write	current	Restore factory default configuration. Get this OID always return zero. 2 - Restore default included default ip address. 1 - Restore default without changing c…
1.3.6.1.4.1.2356.800.2.2126.1.5.1.4	Scalares2126RestoreUser	read-write	current	Restore user configuration. Get this OID always return zero. 1 - Restore. 0 - do nothing.
1.3.6.1.4.1.2356.800.2.2126.1.5.2	Nodees2126ConfigFile
1.3.6.1.4.1.2356.800.2.2126.1.5.2.1	Scalares2126ExportConfigName	read-write	current	Get/Set the export file path and name.
1.3.6.1.4.1.2356.800.2.2126.1.5.2.2	Scalares2126DoExportConfig	read-write	current	Do export-config. Get this OID always return zero. 1 - Export start section. 2 - Export user-conf section.
1.3.6.1.4.1.2356.800.2.2126.1.5.2.3	Scalares2126ImportConfigName	read-write	current	Get/Set the import file path and name.
1.3.6.1.4.1.2356.800.2.2126.1.5.2.4	Scalares2126DoImportConfig	read-write	current	Do import-config. Get this OID always return zero. 1 - Import start section. 2 - Import user-conf section.
1.3.6.1.4.1.2356.800.2.2126.1.6	Nodees2126Diagnostic
1.3.6.1.4.1.2356.800.2.2126.1.6.1	Scalares2126InternalLoopbackTest	read-only	current	Internal loop back test.
1.3.6.1.4.1.2356.800.2.2126.1.6.2	Scalares2126ExternalLoopbackTest	read-only	current	External loop back test.
1.3.6.1.4.1.2356.800.2.2126.1.6.3	Scalares2126PingTest	read-write	current	Set the host address that you want to ping and the system will return the test result.
1.3.6.1.4.1.2356.800.2.2126.1.6.4	Nodees2126Watchdog
1.3.6.1.4.1.2356.800.2.2126.1.6.4.1	Scalares2126WatchdogState	read-write	current	Set the watchdog state. 1 - Enable. 0 - Disable.
1.3.6.1.4.1.2356.800.2.2126.1.6.4.2	Scalares2126WatchdogTimeGap	read-write	current	Set the watchdog time gap, from 1 to 100.
1.3.6.1.4.1.2356.800.2.2126.1.6.4.3	Scalares2126WatchdogHost	read-write	current	Set the watchdog host
1.3.6.1.4.1.2356.800.2.2126.1.6.4.4	Scalares2126WatchdogResetMgtInf	read-write	current	Set the state of resetting the management cpu interface. 1 - Enable. 0 - Disable.
1.3.6.1.4.1.2356.800.2.2126.1.6.4.5	Scalares2126WatchdogResetMgtInfCount	read-write	current	Set the count of resetting the management cpu interface.
1.3.6.1.4.1.2356.800.2.2126.1.6.4.6	Scalares2126WatchdogResetSystem	read-write	current	Set the state of rebooting the system. 1 - Enable. 0 - Disable.
1.3.6.1.4.1.2356.800.2.2126.1.6.4.7	Scalares2126WatchdogResetSystemCount	read-write	current	Set the count of rebooting the system
1.3.6.1.4.1.2356.800.2.2126.1.7	Nodees2126Log
1.3.6.1.4.1.2356.800.2.2126.1.7.1	Scalares2126ClearLog	read-write	current	Clear system log. Get this OID always return zero. 1 - Clear log. 0 - do nothing.
1.3.6.1.4.1.2356.800.2.2126.1.7.2	Scalares2126UploadLog	read-write	current	Upload current system log. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return zero.…
1.3.6.1.4.1.2356.800.2.2126.1.7.3	Scalares2126AutoUploadLogState	read-write	current	Enable auto-upload log function. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return…
1.3.6.1.4.1.2356.800.2.2126.1.7.4	Scalares2126LogNumber	read-only	current	Get the number of current system log.
1.3.6.1.4.1.2356.800.2.2126.1.7.5	Tablees2126LogTable	not-accessible	current	This is a list of log entry. The numbers of entries are given by the value of es2126LogNumber.
1.3.6.1.4.1.2356.800.2.2126.1.7.5.1	Rowes2126LogEntry	not-accessible	current	This is the Entry information for system log.
1.3.6.1.4.1.2356.800.2.2126.1.7.5.1.1	Columnes2126LogIndex	read-only	current	This is the index of the log entry.
1.3.6.1.4.1.2356.800.2.2126.1.7.5.1.2	Columnes2126LogEvent	read-only	current	This is the detail information of the log entry.
1.3.6.1.4.1.2356.800.2.2126.1.8	Nodees2126Firmware
1.3.6.1.4.1.2356.800.2.2126.1.8.1	Scalares2126FirmwareFileName	read-write	current	Get/Set the path and filename for firmware upgrading.
1.3.6.1.4.1.2356.800.2.2126.1.8.2	Scalares2126DoFirmwareUpgrade	read-write	current	Do firmware upgrade. Get this OID always return zero. 1 - Do firmware upgrade. 0 - do nothing.
1.3.6.1.4.1.2356.800.2.2126.1.9	Nodees2126Port
1.3.6.1.4.1.2356.800.2.2126.1.9.1	Nodees2126PortStatus
1.3.6.1.4.1.2356.800.2.2126.1.9.1.1	Scalares2126PortStatusNumber	read-only	current	Get the number of port.
1.3.6.1.4.1.2356.800.2.2126.1.9.1.2	Tablees2126PortStatusTable	not-accessible	current	This is a list of port status entry. The numbers of entries are given by the value of es2126PortStatusNumber.
1.3.6.1.4.1.2356.800.2.2126.1.9.1.2.1	Rowes2126PortStatusEntry	not-accessible	current	This is the entry(s) for port status information.
1.3.6.1.4.1.2356.800.2.2126.1.9.1.2.1.1	Columnes2126PortStatusIndex	read-only	current	This is the index of the port status entry.
1.3.6.1.4.1.2356.800.2.2126.1.9.1.2.1.2	Columnes2126PortStatusMedia	read-only	current	The port media type of the port status entry.
1.3.6.1.4.1.2356.800.2.2126.1.9.1.2.1.3	Columnes2126PortStatusLink	read-only	current	This is the port link of the port status entry.
1.3.6.1.4.1.2356.800.2.2126.1.9.1.2.1.4	Columnes2126PortStatusPortState	read-only	current	This is the port state of the port status entry.
1.3.6.1.4.1.2356.800.2.2126.1.9.1.2.1.5	Columnes2126PortStatusAutoNego	read-only	current	This is the auto negotiation of the port status entry.
1.3.6.1.4.1.2356.800.2.2126.1.9.1.2.1.6	Columnes2126PortStatusSpdDpx	read-only	current	This is the speed/duplex of the port status entry.
1.3.6.1.4.1.2356.800.2.2126.1.9.1.2.1.7	Columnes2126PortStatusRxPause	read-only	current	The Rx Pause of the port status entry.
1.3.6.1.4.1.2356.800.2.2126.1.9.1.2.1.8	Columnes2126PortStatusTxPause	read-only	current	The Tx Pause of the port status entry.
1.3.6.1.4.1.2356.800.2.2126.1.9.1.2.1.9	Columnes2126PortStatusDescription	read-only	current	This is the description of port.
1.3.6.1.4.1.2356.800.2.2126.1.9.2	Nodees2126PortConf
1.3.6.1.4.1.2356.800.2.2126.1.9.2.1	Scalares2126PortConfNumber	read-only	current	Get the number of port configuration.
1.3.6.1.4.1.2356.800.2.2126.1.9.2.2	Tablees2126PortConfTable	not-accessible	current	This is a list of port configuration entry. The numbers of entries are given by the value of es2126PortConfNumber.
1.3.6.1.4.1.2356.800.2.2126.1.9.2.2.1	Rowes2126PortConfEntry	not-accessible	current	This is the Entry(s) for port configuration information.
1.3.6.1.4.1.2356.800.2.2126.1.9.2.2.1.1	Columnes2126PortConfIndex	read-only	current	This is the index of the port configuration entry.
1.3.6.1.4.1.2356.800.2.2126.1.9.2.2.1.2	Columnes2126PortConfPortState	read-write	current	This is the port state of the port configuration entry. 0 - disabled. 1 - enabled.
1.3.6.1.4.1.2356.800.2.2126.1.9.2.2.1.3	Columnes2126PortConfSpdDpx	read-write	current	This is the speed/duplex of the port configuration entry. 0 - auto. 1 - 10M/Half. 2 - 10M/Full. 3 - 100M/Half. 4 - 100M/Full. 5 - 1G/Full.
1.3.6.1.4.1.2356.800.2.2126.1.9.2.2.1.4	Columnes2126PortConfFlwCtrl	read-write	current	This is the flow control of the port configuration entry. 0 - asymmetric. 1 - symmetric.
1.3.6.1.4.1.2356.800.2.2126.1.9.2.2.1.5	Columnes2126PortConfDescription	read-write	current	This is the description of port.
1.3.6.1.4.1.2356.800.2.2126.1.9.3	Nodees2126PortBandwidth
1.3.6.1.4.1.2356.800.2.2126.1.9.3.1	Tablees2126PortBandwidthTable	not-accessible	current	This is a list of port bandwidth entry.
1.3.6.1.4.1.2356.800.2.2126.1.9.3.1.1	Rowes2126PortBandwidthEntry	not-accessible	current	This is the Entry(s) for port bandwidth configuration.
1.3.6.1.4.1.2356.800.2.2126.1.9.3.1.1.1	Columnes2126PortBandwidthIndex	read-only	current	This is the index of the port bandwidth entry.
1.3.6.1.4.1.2356.800.2.2126.1.9.3.1.1.2	Columnes2126PortBandwidthIngressRate	read-write	current	Get/Set the port bandwidth ingress rate. Fast Ethernet port range: 66~102400(Kb) Gigabit Ethernet port range: 66~1024000(Kb)
1.3.6.1.4.1.2356.800.2.2126.1.9.3.1.1.3	Columnes2126PortBandwidthEgressRate	read-write	current	Get/Set the port bandwidth egress rate. Fast Ethernet port range: 66~102400(Kb) Gigabit Ethernet port range: 66~1024000(Kb)
1.3.6.1.4.1.2356.800.2.2126.1.9.3.2	Scalares2126PortBandwidthStormType	read-write	current	This is the bandwidth storm type. 0:Disable 1:Broadcast Storm Control 2:Multicast Storm Control 3:Unknown Unicast Storm Control 4:Broadcast, Multicast, and Unk…
1.3.6.1.4.1.2356.800.2.2126.1.9.3.3	Scalares2126PortBandwidthStormRate	read-write	current	This is the storm rate.
1.3.6.1.4.1.2356.800.2.2126.1.9.4	Nodees2126PortSFPInfo
1.3.6.1.4.1.2356.800.2.2126.1.9.4.1	Scalares2126PortSFPInfoNumber	read-only	current	Get the number of sfp info entry.
1.3.6.1.4.1.2356.800.2.2126.1.9.4.2	Tablees2126PortSFPInfoTable	not-accessible	current	A list of sfp info entry. The numbers of entries are given by the value of es2126PortSFPInfoNumber.
1.3.6.1.4.1.2356.800.2.2126.1.9.4.2.1	Rowes2126PortSFPInfoEntry	not-accessible	current	Entry(s) for SFP information.
1.3.6.1.4.1.2356.800.2.2126.1.9.4.2.1.1	Columnes2126PortSFPInfoIndex	read-only	current	The index of the sfp info entry.
1.3.6.1.4.1.2356.800.2.2126.1.9.4.2.1.2	Columnes2126PortSFPConnectorType	read-only	current	Get connector type of the sfp.
1.3.6.1.4.1.2356.800.2.2126.1.9.4.2.1.3	Columnes2126PortSFPFiberType	read-only	current	Get fiber type of the sfp.
1.3.6.1.4.1.2356.800.2.2126.1.9.4.2.1.4	Columnes2126PortSFPWavelength	read-only	current	Get tx central wavelength of the sfp.
1.3.6.1.4.1.2356.800.2.2126.1.9.4.2.1.5	Columnes2126PortSFPBaudRate	read-only	current	Get baud rate of the sfp.
1.3.6.1.4.1.2356.800.2.2126.1.9.4.2.1.6	Columnes2126PortSFPVendorOUI	read-only	current	Get vendor OUI of the sfp.
1.3.6.1.4.1.2356.800.2.2126.1.9.4.2.1.7	Columnes2126PortSFPVendorName	read-only	current	Get vendor name of the sfp.
1.3.6.1.4.1.2356.800.2.2126.1.9.4.2.1.8	Columnes2126PortSFPVendorPN	read-only	current	Get vendor part number of the sfp.
1.3.6.1.4.1.2356.800.2.2126.1.9.4.2.1.9	Columnes2126PortSFPVendorRev	read-only	current	Get vendor revision number of the sfp.
1.3.6.1.4.1.2356.800.2.2126.1.9.4.2.1.10	Columnes2126PortSFPVendorSN	read-only	current	Get vendor serial number of the sfp.
1.3.6.1.4.1.2356.800.2.2126.1.9.4.2.1.11	Columnes2126PortSFPDateCode	read-only	current	Get data code of the sfp.
1.3.6.1.4.1.2356.800.2.2126.1.9.4.2.1.12	Columnes2126PortSFPTemperature	read-only	current	Get current temperature of the sfp.
1.3.6.1.4.1.2356.800.2.2126.1.9.4.2.1.13	Columnes2126PortSFPVcc	read-only	current	Get current internal supply voltage of the sfp.
1.3.6.1.4.1.2356.800.2.2126.1.9.4.2.1.14	Columnes2126PortSFPTxBias	read-only	current	Get current TX Bias of the sfp.
1.3.6.1.4.1.2356.800.2.2126.1.9.4.2.1.15	Columnes2126PortSFPTxPWR	read-only	current	Get current TX output power of the sfp.
1.3.6.1.4.1.2356.800.2.2126.1.9.4.2.1.16	Columnes2126PortSFPRxPWR	read-only	current	Get current Received Power of the sfp.
1.3.6.1.4.1.2356.800.2.2126.1.10	Nodees2126LoopDetectedConf
1.3.6.1.4.1.2356.800.2.2126.1.10.1	Scalares2126LoopDetectedNumber	read-only	current	Get the number of loop detected entry.
1.3.6.1.4.1.2356.800.2.2126.1.10.2	Tablees2126LoopDetectedTable	not-accessible	current	This is a list of loop detected entry. The number of entries are given by the value of es2126LoopDetectedNumber.
1.3.6.1.4.1.2356.800.2.2126.1.10.2.1	Rowes2126LoopDetectedEntry	not-accessible	current	Entry(s) for loop detected information.
1.3.6.1.4.1.2356.800.2.2126.1.10.2.1.1	Columnes2126LoopDetectedfIndex	read-only	current	This is the index of the loop detected entry.
1.3.6.1.4.1.2356.800.2.2126.1.10.2.1.2	Columnes2126LoopDetectedStateEbl	read-write	current	The state of the loop detected entry. 0 - disabled. 1 - enabled.
1.3.6.1.4.1.2356.800.2.2126.1.10.2.1.3	Columnes2126LoopDetectedCurrentStatus	read-only	current	The current status of the loop detected port. 0 - Unlocked 1 - Locked due to the loop condition
1.3.6.1.4.1.2356.800.2.2126.1.10.2.1.4	Columnes2126LoopDetectedResumed	read-write	current	Unlock the port which is locked due to loop condition. Get this OID always return zero. 1 - Unlock the port, 0 - do nothing.
1.3.6.1.4.1.2356.800.2.2126.1.10.3	Scalares2126LoopDetectedAction	read-write	current	Set the corresponding action while loop is detected. 1 - Lock the loop port, 0 - do nothing.
1.3.6.1.4.1.2356.800.2.2126.1.11	Nodees2126MacTableInfo
1.3.6.1.4.1.2356.800.2.2126.1.11.1	Nodees2126MacTableMaintenance
1.3.6.1.4.1.2356.800.2.2126.1.11.1.1	Scalares2126MacTableAgingTime	read-write	current	Set the Mac Table Aging Time (10~1000000 Secs). 0 : Disable.
1.3.6.1.4.1.2356.800.2.2126.1.11.1.2	Scalares2126MacTableFlush	read-write	current	1 : Flush Mac Table.
1.3.6.1.4.1.2356.800.2.2126.1.11.1.3	Tablees2126MacTableLearnPortLimitTable	not-accessible	current	This is a list of MAC Learning Limitentry.
1.3.6.1.4.1.2356.800.2.2126.1.11.1.3.1	Rowes2126MacTableLearnPortLimitEntry	not-accessible	current	Entry(s) for Mac Table Port Learning Limit.
1.3.6.1.4.1.2356.800.2.2126.1.11.1.3.1.1	Columnes2126MacTableLearnPortLimitIndex	not-accessible	current	The index of the Mac Table Learning Limit entry.
1.3.6.1.4.1.2356.800.2.2126.1.11.1.3.1.2	Columnes2126MacTableLearnPortLimit	read-write	current	Port Learning Limit (0~8191).
1.3.6.1.4.1.2356.800.2.2126.1.11.3	Nodees2126MacTableStaticMac
1.3.6.1.4.1.2356.800.2.2126.1.11.3.1	Scalares2126MacTableStaticMacNumber	read-only	current	This is number of static Mac table entry
1.3.6.1.4.1.2356.800.2.2126.1.11.3.2	Scalares2126MacTableStaticMacEntryCreate	read-write	current	Creat a static mac entry.
1.3.6.1.4.1.2356.800.2.2126.1.11.3.3	Tablees2126MacTableStaticMacTable	not-accessible	current	This is a list of static MAC table.
1.3.6.1.4.1.2356.800.2.2126.1.11.3.3.1	Rowes2126MacTableStaticMacEntry	not-accessible	current	Entry(s) for Static Mac Table.
1.3.6.1.4.1.2356.800.2.2126.1.11.3.3.1.1	Columnes2126MacTableStaticMacIndex	not-accessible	current	The index of the static Mac Table.
1.3.6.1.4.1.2356.800.2.2126.1.11.3.3.1.2	Columnes2126MacTableStaticMacAddress	read-write	current	The mac address of the static mac table entry.
1.3.6.1.4.1.2356.800.2.2126.1.11.3.3.1.3	Columnes2126MacTableStaticMacVid	read-write	current	The vlan id of the static mac table entry.
1.3.6.1.4.1.2356.800.2.2126.1.11.3.3.1.4	Columnes2126MacTableStaticMacQueue	read-write	current	The queue of the static mac table entry.
1.3.6.1.4.1.2356.800.2.2126.1.11.3.3.1.5	Columnes2126MacTableStaticMacFwRule	read-write	current	The forwarding rule of the static mac table entry. 0 : static 1 : Static with Destination Drop 2 : Static with Source Drop
1.3.6.1.4.1.2356.800.2.2126.1.11.3.3.1.6	Columnes2126MacTableStaticMacPort	read-write	current	The port of the static mac table entry.
1.3.6.1.4.1.2356.800.2.2126.1.11.3.3.1.7	Columnes2126MacTableStaticMacEntryAction	read-write	current	The port of the static mac table entry.
1.3.6.1.4.1.2356.800.2.2126.1.11.4	Nodees2126MacTableMacAlias
1.3.6.1.4.1.2356.800.2.2126.1.11.4.1	Scalares2126MacTableMacAliasNumber	read-only	current	This is number of static Mac table entry
1.3.6.1.4.1.2356.800.2.2126.1.11.4.2	Scalares2126MacTableMacAliasEntryCreate	read-write	current	Creat a static mac alias entry.
1.3.6.1.4.1.2356.800.2.2126.1.11.4.3	Tablees2126MacTableMacAliasTable	not-accessible	current	This is a list of MAC Alias table.
1.3.6.1.4.1.2356.800.2.2126.1.11.4.3.1	Rowes2126MacTableMacAliasEntry	not-accessible	current	Entry(s) for Alias Mac Table.
1.3.6.1.4.1.2356.800.2.2126.1.11.4.3.1.1	Columnes2126MacTableMacAliasIndex	not-accessible	current	The index of the Alias Mac Table.
1.3.6.1.4.1.2356.800.2.2126.1.11.4.3.1.2	Columnes2126MacTableMacAliasAddress	read-write	current	The Mac address of the Alias Mac Table.
1.3.6.1.4.1.2356.800.2.2126.1.11.4.3.1.3	Columnes2126MacTableMacAliasAlias	read-write	current	The Mac Alias of the Alias Mac Table.
1.3.6.1.4.1.2356.800.2.2126.1.11.4.3.1.4	Columnes2126MacTableMacAliasEntryAction	read-write	current	The action of the alias mac table entry.
1.3.6.1.4.1.2356.800.2.2126.1.12	Nodees2126GVRPInfo
1.3.6.1.4.1.2356.800.2.2126.1.12.1	Nodees2126GvrpConf
1.3.6.1.4.1.2356.800.2.2126.1.12.1.1	Scalares2126GvrpConfState	read-write	current	The state of GVRP. 0 - Disable 1 - Enable
1.3.6.1.4.1.2356.800.2.2126.1.12.1.2	Tablees2126GvrpConfTable	not-accessible	current	This is a list of the GVRP conf table.
1.3.6.1.4.1.2356.800.2.2126.1.12.1.2.1	Rowes2126GvrpConfEntry	not-accessible	current	Entry(s) for the GVRP conf table.
1.3.6.1.4.1.2356.800.2.2126.1.12.1.2.1.1	Columnes2126GvrpConfIndex	not-accessible	current	The index of the GVRP conf table.
1.3.6.1.4.1.2356.800.2.2126.1.12.1.2.1.2	Columnes2126GvrpConfJoinTime	read-write	current	The join time of the GVRP entry. range: 20~100 default 20 centisecond
1.3.6.1.4.1.2356.800.2.2126.1.12.1.2.1.3	Columnes2126GvrpConfLeaveTime	read-write	current	The leave time of the GVRP entry. range: 60~300 default:60 centisecond
1.3.6.1.4.1.2356.800.2.2126.1.12.1.2.1.4	Columnes2126GvrpConfLeaveAllTime	read-write	current	The leave all time of the GVRP entry. range: 1000~5000 default: 1000 unit time
1.3.6.1.4.1.2356.800.2.2126.1.12.1.2.1.5	Columnes2126GvrpConfDefaultAppMode	read-write	current	The default application mode of the GVRP entry. 0 - Normal 1 - Non-Participant default: Normal
1.3.6.1.4.1.2356.800.2.2126.1.12.1.2.1.6	Columnes2126GvrpConfDefaultRegMode	read-write	current	The default registrar mode of the GVRP entry. 0 - Normal 1 - Fixed 2 - Forbidden default: Normal
1.3.6.1.4.1.2356.800.2.2126.1.12.1.2.1.7	Columnes2126GvrpConfRestrictedMode	read-write	current	The restricted mode of the GVRP entry. 0 - Disable 1 - Enable default: Disable
1.3.6.1.4.1.2356.800.2.2126.1.12.2	Nodees2126GvrpCounter
1.3.6.1.4.1.2356.800.2.2126.1.12.2.1	Tablees2126GvrpCounterTable	not-accessible	current	This is a list of the GVRP counter table.
1.3.6.1.4.1.2356.800.2.2126.1.12.2.1.1	Rowes2126GvrpCounterEntry	not-accessible	current	Entry(s) for the GVRP counter table.
1.3.6.1.4.1.2356.800.2.2126.1.12.2.1.1.1	Columnes2126GvrpCounterIndex	not-accessible	current	The port index of the GVRP counter table.
1.3.6.1.4.1.2356.800.2.2126.1.12.2.1.1.2	Columnes2126GvrpCounterRxTotalGvrpPkts	read-only	current	This is Rx Total GVRP packet counters.
1.3.6.1.4.1.2356.800.2.2126.1.12.2.1.1.3	Columnes2126GvrpCounterRxInvalidGvrpPkts	read-only	current	This is Rx Invalid GVRP packet counters.
1.3.6.1.4.1.2356.800.2.2126.1.12.2.1.1.4	Columnes2126GvrpCounterRxLeaveAllMsg	read-only	current	This is Rx LeaveAll message packet counters.
1.3.6.1.4.1.2356.800.2.2126.1.12.2.1.1.5	Columnes2126GvrpCounterRxJoinEmptyMsg	read-only	current	This is Rx JoinEmpty message packet counters.
1.3.6.1.4.1.2356.800.2.2126.1.12.2.1.1.6	Columnes2126GvrpCounterRxJoinInMsg	read-only	current	This is Rx JoinIn message packet counters.
1.3.6.1.4.1.2356.800.2.2126.1.12.2.1.1.7	Columnes2126GvrpCounterRxLeaveEmptyMsg	read-only	current	This is Rx LeaveEmpty message packet counters.
1.3.6.1.4.1.2356.800.2.2126.1.12.2.1.1.8	Columnes2126GvrpCounterRxEmptyMsg	read-only	current	This is Rx Empty message packet counters.
1.3.6.1.4.1.2356.800.2.2126.1.12.2.1.1.9	Columnes2126GvrpCounterTxTotalGvrpPkts	read-only	current	This is Tx Total GVRP packet counters.
1.3.6.1.4.1.2356.800.2.2126.1.12.2.1.1.10	Columnes2126GvrpCounterTxLeaveAllMsg	read-only	current	This is Tx LeaveAll message packet counters.
1.3.6.1.4.1.2356.800.2.2126.1.12.2.1.1.11	Columnes2126GvrpCounterTxJoinEmptyMsg	read-only	current	This is Tx JoinEmpty message packet counters.
1.3.6.1.4.1.2356.800.2.2126.1.12.2.1.1.12	Columnes2126GvrpCounterTxJoinInMsg	read-only	current	This is Tx JoinIn message packet counters.
1.3.6.1.4.1.2356.800.2.2126.1.12.2.1.1.13	Columnes2126GvrpCounterTxLeaveEmptyMsg	read-only	current	This is Tx LeaveEmpty message packet counters.
1.3.6.1.4.1.2356.800.2.2126.1.12.2.1.1.14	Columnes2126GvrpCounterTxEmptyMsg	read-only	current	This is Tx Empty message packet counters.
1.3.6.1.4.1.2356.800.2.2126.1.12.3	Nodees2126GvrpGroup
1.3.6.1.4.1.2356.800.2.2126.1.12.3.1	Scalares2126GvrpGroupNumber	read-only	current	This is number of the GVRP group table entry.
1.3.6.1.4.1.2356.800.2.2126.1.12.3.2	Tablees2126GvrpGroupTable	not-accessible	current	This is a list of the GVRP group table.
1.3.6.1.4.1.2356.800.2.2126.1.12.3.2.1	Rowes2126GvrpGroupEntry	not-accessible	current	Entry(s) for the GVRP group table.
1.3.6.1.4.1.2356.800.2.2126.1.12.3.2.1.1	Columnes2126GvrpGroupId	read-only	current	The index of the GVRP group table.
1.3.6.1.4.1.2356.800.2.2126.1.12.3.2.1.2	Columnes2126GvrpGroupVid	read-only	current	This is vid of GVRP group.
1.3.6.1.4.1.2356.800.2.2126.1.12.3.2.1.3	Columnes2126GvrpGroupMemberPort	read-only	current	This is the member port of GVRP group.
1.3.6.1.4.1.2356.800.2.2126.1.13	Nodees2126Security
1.3.6.1.4.1.2356.800.2.2126.1.13.1	Scalares2126IsolatedPortGroup	read-write	current	This is isolated group. 0: Disable
1.3.6.1.4.1.2356.800.2.2126.1.13.2	Nodees2126Mirror
1.3.6.1.4.1.2356.800.2.2126.1.13.2.1	Scalares2126MirrorMode	read-write	current	This is mirror mode. 0 - Disable 1 - Enable
1.3.6.1.4.1.2356.800.2.2126.1.13.2.2	Scalares2126MonitoringPort	read-write	current	This is monitoring port.
1.3.6.1.4.1.2356.800.2.2126.1.13.2.3	Scalares2126MonitoredIngressPort	read-write	current	This is monitored ingress ports.
1.3.6.1.4.1.2356.800.2.2126.1.13.2.4	Scalares2126MonitoredEgressPort	read-write	current	This is monitored egress ports.
1.3.6.1.4.1.2356.800.2.2126.1.14	Nodees2126VirtualStack
1.3.6.1.4.1.2356.800.2.2126.1.14.1	Scalares2126VirtualStackState	read-write	current	Set the Virtual Stack State. 0 : disable, 1 : enable
1.3.6.1.4.1.2356.800.2.2126.1.14.2	Scalares2126VirtualStackRole	read-write	current	Set the Virtual Stack Role. 0 : slave, 1 : master
1.3.6.1.4.1.2356.800.2.2126.1.14.3	Scalares2126VirtualStackGroupID	read-write	current	Set the Virtual Stack Group ID.
1.3.6.1.4.1.2356.800.2.2126.1.15	Nodees2126ManagementSecurity
1.3.6.1.4.1.2356.800.2.2126.1.15.1	Scalares2126ManagementSecurityNumber	read-only	current	This is number of the management security table entry.
1.3.6.1.4.1.2356.800.2.2126.1.15.2	Scalares2126ManagementSecurityEntryCreate	read-write	current	Creat a management security entry.
1.3.6.1.4.1.2356.800.2.2126.1.15.3	Tablees2126ManagementSecurityTable	not-accessible	current	This is a list of the management security table.
1.3.6.1.4.1.2356.800.2.2126.1.15.3.1	Rowes2126ManagementSecurityEntry	not-accessible	current	Entry(s) for the management security table.
1.3.6.1.4.1.2356.800.2.2126.1.15.3.1.1	Columnes2126ManagementSecurityIndex	not-accessible	current	The index of the management security table.
1.3.6.1.4.1.2356.800.2.2126.1.15.3.1.2	Columnes2126ManagementSecurityName	read-write	current	The name of the management security entry.
1.3.6.1.4.1.2356.800.2.2126.1.15.3.1.3	Columnes2126ManagementSecurityVid	read-write	current	This is the vid of the management security entry. 0: any VID.
1.3.6.1.4.1.2356.800.2.2126.1.15.3.1.4	Columnes2126ManagementSecurityIpRange	read-write	current	This is the IP range of the management security entry. 0: any IP.
1.3.6.1.4.1.2356.800.2.2126.1.15.3.1.5	Columnes2126ManagementSecurityIncomigPort	read-write	current	This is the ports of the management security entry. 0: any incoming port.
1.3.6.1.4.1.2356.800.2.2126.1.15.3.1.6	Columnes2126ManagementSecurityAccessType	read-write	current	This is the access type of the management security entry. 0: http, telnet, and SNMP.
1.3.6.1.4.1.2356.800.2.2126.1.15.3.1.7	Columnes2126ManagementSecurityAction	read-write	current	This is the action of the management security entry. 0:deny 1:accept
1.3.6.1.4.1.2356.800.2.2126.1.15.3.1.8	Columnes2126ManagementSecurityEntryAction	read-write	current	The action the management security entry.
1.3.6.1.4.1.2356.800.2.2126.1.16	Nodees2126QoS
1.3.6.1.4.1.2356.800.2.2126.1.16.1	Nodees2126QoSGlobalConfig
1.3.6.1.4.1.2356.800.2.2126.1.16.1.1	Scalares2126QoSMode	read-write	current	The mode of QoS. 0 - Disable 1 - Enable
1.3.6.1.4.1.2356.800.2.2126.1.16.1.2	Scalares2126QosPriorityControl1p	read-write	current	This is the priority control for 802.1p. 0 - Disable 1 - Enable
1.3.6.1.4.1.2356.800.2.2126.1.16.1.3	Scalares2126QosPriorityControlTOS	read-write	current	This is the priority control for TOS. 0 - Disable 1 - Enable
1.3.6.1.4.1.2356.800.2.2126.1.16.1.4	Scalares2126QosPriorityControlDSCP	read-write	current	This is the priority control for DSCP. 0 - Disable 1 - Enable
1.3.6.1.4.1.2356.800.2.2126.1.16.1.5	Scalares2126QoSSchedulingMethod	read-write	current	This is the scheduling method. 0 - WRR 1 - Strict
1.3.6.1.4.1.2356.800.2.2126.1.16.1.6	Scalares2126QoSWeightQ0	read-write	current	This is the weigtht of Queue0.
1.3.6.1.4.1.2356.800.2.2126.1.16.1.7	Scalares2126QoSWeightQ1	read-write	current	This is the weigtht of Queue1.
1.3.6.1.4.1.2356.800.2.2126.1.16.1.8	Scalares2126QoSWeightQ2	read-write	current	This is the weigtht of Queue2.
1.3.6.1.4.1.2356.800.2.2126.1.16.1.9	Scalares2126QoSWeightQ3	read-write	current	This is the weigtht of Queue3.
1.3.6.1.4.1.2356.800.2.2126.1.16.2	Scalares2126QoSVIPPort	read-write	current	This is the VIP group for QoS.
1.3.6.1.4.1.2356.800.2.2126.1.16.3	Nodees2126QoS1pPriority
1.3.6.1.4.1.2356.800.2.2126.1.16.3.1	Tablees2126QoS1pPriorityTable	not-accessible	current	This is a list of the 802.1p.
1.3.6.1.4.1.2356.800.2.2126.1.16.3.1.1	Rowes2126QoS1pPriorityEntry	not-accessible	current	Entry(s) for the 802.1p priority table.
1.3.6.1.4.1.2356.800.2.2126.1.16.3.1.1.1	Columnes2126QoS1pPriorityIndex	not-accessible	current	The index of the 802.1p priority table.
1.3.6.1.4.1.2356.800.2.2126.1.16.3.1.1.2	Columnes2126QoS1pPriorityValue	read-only	current	The value of 802.1p priority entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.3.1.1.3	Columnes2126QoS1pPriorityQueue	read-write	current	The queue of 802.1p priority entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.4	Nodees2126QoSDTypeTOSPriority
1.3.6.1.4.1.2356.800.2.2126.1.16.4.1	Tablees2126QoSDTypeTOSPriorityTable	not-accessible	current	This is a list of the TOS delay priority mapping entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.4.1.1	Rowes2126QoSDTypeTOSPriorityEntry	not-accessible	current	Entry(s) for the ToS delay priority mapping entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.4.1.1.1	Columnes2126QoSDTypeTOSPriorityIndex	not-accessible	current	The index of the ToS delay priority mapping table.
1.3.6.1.4.1.2356.800.2.2126.1.16.4.1.1.2	Columnes2126QoSDTypeTOSPriorityValue	read-only	current	The value of ToS delay priority mapping entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.4.1.1.3	Columnes2126QoSDTypeTOSPriorityQueue	read-write	current	The queue of ToS delay priority mapping entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.5	Nodees2126QoSTTypeTOSPriority
1.3.6.1.4.1.2356.800.2.2126.1.16.5.1	Tablees2126QoSTTypeTOSPriorityTable	not-accessible	current	This is a list of the ToS throughput priority mapping entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.5.1.1	Rowes2126QoSTTypeTOSPriorityEntry	not-accessible	current	Entry(s) for the TOS Throughput mapping entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.5.1.1.1	Columnes2126QoSTTypeTOSPriorityIndex	not-accessible	current	The index of the TOS throughput priority mapping table.
1.3.6.1.4.1.2356.800.2.2126.1.16.5.1.1.2	Columnes2126QoSTTypeTOSPriorityValue	read-only	current	The value of TOS throughput priority mapping entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.5.1.1.3	Columnes2126QoSTTypeTOSPriorityQueue	read-write	current	The queue of TOS throughput priority mapping entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.6	Nodees2126QoSRTypeTOSPriority
1.3.6.1.4.1.2356.800.2.2126.1.16.6.1	Tablees2126QoSRTypeTOSPriorityTable	not-accessible	current	This is a list of the ToS reliability priority mapping entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.6.1.1	Rowes2126QoSRTypeTOSPriorityEntry	not-accessible	current	Entry(s) for the TOS reliability mapping entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.6.1.1.1	Columnes2126QoSRTypeTOSPriorityIndex	not-accessible	current	The index of the TOS reliability priority mapping table.
1.3.6.1.4.1.2356.800.2.2126.1.16.6.1.1.2	Columnes2126QoSRTypeTOSPriorityValue	read-only	current	The value of TOS reliability priority mapping entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.6.1.1.3	Columnes2126QoSRTypeTOSPriorityQueue	read-write	current	The queue of TOS reliability priority mapping entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.7	Nodees2126QoSMTypeTOSPriority
1.3.6.1.4.1.2356.800.2.2126.1.16.7.1	Tablees2126QoSMTypeTOSPriorityTable	not-accessible	current	This is a list of the ToS monetary cost priority mapping entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.7.1.1	Rowes2126QoSMTypeTOSPriorityEntry	not-accessible	current	Entry(s) for the TOS monetary cost mapping entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.7.1.1.1	Columnes2126QoSMTypeTOSPriorityIndex	not-accessible	current	The index of the TOS monetary cost priority mapping table.
1.3.6.1.4.1.2356.800.2.2126.1.16.7.1.1.2	Columnes2126QoSMTypeTOSPriorityValue	read-only	current	The value of TOS monetary cost priority mapping entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.7.1.1.3	Columnes2126QoSMTypeTOSPriorityQueue	read-write	current	The queue of TOS monetary cost priority mapping entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.8	Nodees2126QoSDSCPPriority
1.3.6.1.4.1.2356.800.2.2126.1.16.8.1	Tablees2126QoSDSCPPriorityTable	not-accessible	current	This is a list of the DSCP priority entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.8.1.1	Rowes2126QoSDSCPPriorityEntry	not-accessible	current	Entry(s) for the DSCP priority mapping entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.8.1.1.1	Columnes2126QoSDSCPPriorityIndex	not-accessible	current	The index of the DSCP priority priority mapping table.
1.3.6.1.4.1.2356.800.2.2126.1.16.8.1.1.2	Columnes2126QoSDSCPPriorityValue	read-only	current	The value of DSCP priority priority mapping entry.
1.3.6.1.4.1.2356.800.2.2126.1.16.8.1.1.3	Columnes2126QoSDSCPPriorityQueue	read-write	current	The queue of DSCP priority priority mapping entry.
1.3.6.1.4.1.2356.800.2.2126.1.17	Nodees2126Vlan
1.3.6.1.4.1.2356.800.2.2126.1.17.1	Nodees2126VlanModeConfig
1.3.6.1.4.1.2356.800.2.2126.1.17.1.1	Scalares2126VlanMode	read-write	current	0:Tag-based, 1:Port-based, 2:Metro mode
1.3.6.1.4.1.2356.800.2.2126.1.17.1.2	Scalares2126SymmetricVlan	read-write	current	Symmetric VLAN: for tag-based 0:disable, 1:enable
1.3.6.1.4.1.2356.800.2.2126.1.17.1.3	Scalares2126VlanSVL	read-write	current	SVL: : for tag-based 0:disable, 1:enable
1.3.6.1.4.1.2356.800.2.2126.1.17.1.4	Scalares2126DoubleTag	read-write	current	Double Tag: for tag-based 0:disable, 1:enable
1.3.6.1.4.1.2356.800.2.2126.1.17.1.5	Scalares2126UpLinkPort	read-write	current	Up link Port: for Metro mode 0:Port 25, 1:Port 26, 2:Port 25 & 26
1.3.6.1.4.1.2356.800.2.2126.1.17.2	Nodees2126TagBasedVlanGroup
1.3.6.1.4.1.2356.800.2.2126.1.17.2.1	Scalares2126TagBasedVlanNumbers	read-only	current	Total numbers for tag-based vlan.
1.3.6.1.4.1.2356.800.2.2126.1.17.2.2	Scalares2126TagBasedCreateStatus	read-write	current	Creat a temp vlan in tag-based vlan table. 0 : none, 1~4094 : creat with this vid.
1.3.6.1.4.1.2356.800.2.2126.1.17.2.3	Tablees2126TagBasedVlanTable	not-accessible	current
1.3.6.1.4.1.2356.800.2.2126.1.17.2.3.1	Rowes2126TagBasedVlanEntry	not-accessible	current	Entry(s) for tag-based vlan table.
1.3.6.1.4.1.2356.800.2.2126.1.17.2.3.1.1	Columnes2126TagBasedVlanVid	not-accessible	current	The vid of vlan.
1.3.6.1.4.1.2356.800.2.2126.1.17.2.3.1.2	Columnes2126TagBasedVlanName	read-write	current	The name of vlan.
1.3.6.1.4.1.2356.800.2.2126.1.17.2.3.1.3	Columnes2126TagBasedVlanMember	read-write	current	The member of vlan.
1.3.6.1.4.1.2356.800.2.2126.1.17.2.3.1.4	Columnes2126TagBasedVlanUntag	read-write	current	The untag port of vlan.
1.3.6.1.4.1.2356.800.2.2126.1.17.2.3.1.5	Columnes2126TagBasedVlanRowStatus	read-write	current	The row status of vlan. 1 : active, 2 : not-inService, 3 : delete
1.3.6.1.4.1.2356.800.2.2126.1.17.3	Nodees2126VlanPvid
1.3.6.1.4.1.2356.800.2.2126.1.17.3.1	Tablees2126VlanPvidTable	not-accessible	current
1.3.6.1.4.1.2356.800.2.2126.1.17.3.1.1	Rowes2126VlanPvidEntry	not-accessible	current	Entry(s) for Vlan Pvid.
1.3.6.1.4.1.2356.800.2.2126.1.17.3.1.1.1	Columnes2126VlanPvidPort	not-accessible	current	The port number of pvid entry.
1.3.6.1.4.1.2356.800.2.2126.1.17.3.1.1.2	Columnes2126VlanPvidValue	read-write	current	The pvid value of port.
1.3.6.1.4.1.2356.800.2.2126.1.17.3.1.1.3	Columnes2126VlanPvidDefaultPriority	read-write	current	The default priority of port .
1.3.6.1.4.1.2356.800.2.2126.1.17.3.1.1.4	Columnes2126VlanPvidDropUntag	read-write	current	The drop untag of port .
1.3.6.1.4.1.2356.800.2.2126.1.17.4	Nodees2126PortBasedVlanGroup
1.3.6.1.4.1.2356.800.2.2126.1.17.4.1	Scalares2126PortBasedVlanNumbers	read-only	current	Total numbers for tag-based vlan.
1.3.6.1.4.1.2356.800.2.2126.1.17.4.2	Scalares2126PortBasedCreateStatus	read-write	current	Creat a temp vlan in port-based vlan table. 0 : none, 1 : creat a new port-based vlan.
1.3.6.1.4.1.2356.800.2.2126.1.17.4.3	Tablees2126PortBasedVlanTable	not-accessible	current
1.3.6.1.4.1.2356.800.2.2126.1.17.4.3.1	Rowes2126PortBasedVlanEntry	not-accessible	current	Entry(s) for port-based vlan table.
1.3.6.1.4.1.2356.800.2.2126.1.17.4.3.1.1	Columnes2126PortBasedVlanIndex	not-accessible	current	The index of vlan.
1.3.6.1.4.1.2356.800.2.2126.1.17.4.3.1.2	Columnes2126PortBasedVlanName	read-write	current	The name of vlan.
1.3.6.1.4.1.2356.800.2.2126.1.17.4.3.1.3	Columnes2126PortBasedVlanMember	read-write	current	The member of vlan.
1.3.6.1.4.1.2356.800.2.2126.1.17.4.3.1.4	Columnes2126PortBasedVlanRowStatus	read-write	current	The row status of vlan. 1 : active, 2 : not-inService, 3 : delete
1.3.6.1.4.1.2356.800.2.2126.1.17.5	Nodees2126ManagementVlan
1.3.6.1.4.1.2356.800.2.2126.1.17.5.1	Scalares2126ManagementVlanState	read-write	current	The stat of management vlan. 0 : Disable, 1 : Enable.
1.3.6.1.4.1.2356.800.2.2126.1.17.5.2	Scalares2126ManagementVlanVid	read-write	current	The vid value of management vlan.
1.3.6.1.4.1.2356.800.2.2126.1.18	Nodees2126Dot1X
1.3.6.1.4.1.2356.800.2.2126.1.18.1	Nodees2126Dot1XStateSetting
1.3.6.1.4.1.2356.800.2.2126.1.18.1.1	Scalares2126RadiusServer	read-write	current	Set radius server ip
1.3.6.1.4.1.2356.800.2.2126.1.18.1.2	Scalares2126Dot1XPort	read-write	current	Set 802.1X port number
1.3.6.1.4.1.2356.800.2.2126.1.18.1.3	Scalares2126SecretKey	read-write	current	Set 802.1X secret key
1.3.6.1.4.1.2356.800.2.2126.1.18.1.4	Scalares2126AccountingService	read-write	current	Set 802.1X accounting service 0 : disable 1 : enable
1.3.6.1.4.1.2356.800.2.2126.1.18.1.5	Scalares2126AccountingServer	read-write	current	Set 802.1X accounting server
1.3.6.1.4.1.2356.800.2.2126.1.18.1.6	Scalares2126AccountingPort	read-write	current	Set 802.1X accounting port number
1.3.6.1.4.1.2356.800.2.2126.1.18.2	Nodees2126Dot1XPortSecurityManagement
1.3.6.1.4.1.2356.800.2.2126.1.18.2.1	Tablees2126Dot1XPortSecurityTable	not-accessible	current	This is a list of the 802.1x port security entry.
1.3.6.1.4.1.2356.800.2.2126.1.18.2.1.1	Rowes2126Dot1XPortSecurityEntry	not-accessible	current	Entry(s) for 802.1x port security management table.
1.3.6.1.4.1.2356.800.2.2126.1.18.2.1.1.1	Columnes2126Dot1XPortSecurityPortIndex	not-accessible	current	The port index of 802.1x port security.
1.3.6.1.4.1.2356.800.2.2126.1.18.2.1.1.2	Columnes2126Dot1XPortSecurityMode	read-write	current	The mode of 802.1x port security. 0 : Disable, 1 : Normal, 2 : Advanced 802.1X (Dual port no support)
1.3.6.1.4.1.2356.800.2.2126.1.18.2.1.1.3	Columnes2126Dot1XPortSecurityPortControl	read-write	current	The port control of 802.1x port security. 0 : ForceUnauthorized, 1 : ForceAuthorized, 2 : Auto
1.3.6.1.4.1.2356.800.2.2126.1.18.2.1.1.4	Columnes2126Dot1XPortSecurityReAuthMax	read-write	current	The reAuthMax(1~10) of 802.1x port security.
1.3.6.1.4.1.2356.800.2.2126.1.18.2.1.1.5	Columnes2126Dot1XPortSecurityTxPeriod	read-write	current	The txPeriod(1~65535) of 802.1x port security.
1.3.6.1.4.1.2356.800.2.2126.1.18.2.1.1.6	Columnes2126Dot1XPortSecurityQuietPeriod	read-write	current	The quiet period(0~65535) of 802.1x port security.
1.3.6.1.4.1.2356.800.2.2126.1.18.2.1.1.7	Columnes2126Dot1XPortSecurityReAuthEnabled	read-write	current	The reAuthEnabled of 802.1x port security. 0 : off, 1 : on.
1.3.6.1.4.1.2356.800.2.2126.1.18.2.1.1.8	Columnes2126Dot1XPortSecurityReAuthPeriod	read-write	current	The reAuthPeriod(1~65535) of 802.1x port security.
1.3.6.1.4.1.2356.800.2.2126.1.18.2.1.1.9	Columnes2126Dot1XPortSecurityMaxRequest	read-write	current	The max.request(1~10) of 802.1x port security.
1.3.6.1.4.1.2356.800.2.2126.1.18.2.1.1.10	Columnes2126Dot1XPortSecuritySuppTimeout	read-write	current	The suppTimeout(1~65535) of 802.1x port security.
1.3.6.1.4.1.2356.800.2.2126.1.18.2.1.1.11	Columnes2126Dot1XPortSecurityServerTimeout	read-write	current	The server timeout(1~65535) of 802.1x port security.
1.3.6.1.4.1.2356.800.2.2126.1.18.2.1.1.12	Columnes2126Dot1XPortSecurityStatus	read-only	current	The status of 802.1x port security.
1.3.6.1.4.1.2356.800.2.2126.1.19	Nodees2126TrunkInfo
1.3.6.1.4.1.2356.800.2.2126.1.19.1	Nodees2126TrunkPort
1.3.6.1.4.1.2356.800.2.2126.1.19.1.1	Tablees2126TrunkPortTable	not-accessible	current
1.3.6.1.4.1.2356.800.2.2126.1.19.1.1.1	Rowes2126TrunkPortEntry	not-accessible	current	Entry(s) for trunk table.
1.3.6.1.4.1.2356.800.2.2126.1.19.1.1.1.1	Columnes2126TrunkPortIndex	not-accessible	current	The port index of trunk table.
1.3.6.1.4.1.2356.800.2.2126.1.19.1.1.1.2	Columnes2126TrunkPortMethod	read-write	current	The method of trunk port. 0 : None, 1 : LACP, 2 : Static.
1.3.6.1.4.1.2356.800.2.2126.1.19.1.1.1.3	Columnes2126TrunkPortGroup	read-write	current	The group(0~3) of trunk port.
1.3.6.1.4.1.2356.800.2.2126.1.19.1.1.1.4	Columnes2126TrunkPortActiveLacp	read-write	current	The active lacp mode of trunk port. 0 : Passive, 1 : Active.
1.3.6.1.4.1.2356.800.2.2126.1.19.1.1.1.5	Columnes2126TrunkPortAggtr	read-only	current	The Aggtr of trunk port.
1.3.6.1.4.1.2356.800.2.2126.1.19.1.1.1.6	Columnes2126TrunkPortStatus	read-only	current	The status of trunk port. 0 : None, 1 : Ready.
1.3.6.1.4.1.2356.800.2.2126.1.19.1.1.1.7	Columnes2126TrunkPortCurrentMode	read-write	current	The current mode of trunk port entry. 0 : Active mode, 1 : Edit mode, 2 : Do edit.
1.3.6.1.4.1.2356.800.2.2126.1.19.2	Nodees2126AggregatorView
1.3.6.1.4.1.2356.800.2.2126.1.19.2.1	Tablees2126AggregatorViewTable	not-accessible	current
1.3.6.1.4.1.2356.800.2.2126.1.19.2.1.1	Rowes2126AggregatorViewEntry	not-accessible	current	Entry(s) for aggregator view table.
1.3.6.1.4.1.2356.800.2.2126.1.19.2.1.1.1	Columnes2126AggregatorViewIndex	not-accessible	current	The port index of aggregator view table.
1.3.6.1.4.1.2356.800.2.2126.1.19.2.1.1.2	Columnes2126AggregatorViewMethod	read-only	current	The method of aggregator view table. 0 : None, 1 : LACP, 2 : Static.
1.3.6.1.4.1.2356.800.2.2126.1.19.2.1.1.3	Columnes2126AggregatorViewMemberPorts	read-only	current	The member ports of aggregator view table.
1.3.6.1.4.1.2356.800.2.2126.1.19.2.1.1.4	Columnes2126AggregatorViewReadyPorts	read-only	current	The ready ports of aggregator view table.
1.3.6.1.4.1.2356.800.2.2126.1.19.3	Nodees2126LacpSystemConfiguration
1.3.6.1.4.1.2356.800.2.2126.1.19.3.1	Scalares2126LacpSystemPriority	read-write	current	The priority of LACP system.
1.3.6.1.4.1.2356.800.2.2126.1.19.3.2	Scalares2126LacpSystemHashMethod	read-write	current	The hash method of LACP system. 0 : DA and SA 1 : SA 2 : DA
1.3.6.1.4.1.2356.800.2.2126.1.20	Nodees2126TrapEntry
1.3.6.1.4.1.2356.800.2.2126.1.20.1	Notificationes2126ModuleInserted		current	Send the trap when a module is inserted to the system. The OID value means the port number.
1.3.6.1.4.1.2356.800.2.2126.1.20.2	Notificationes2126ModuleRemoved		current	Send the trap when a module is removed from the system. The OID value means the port number.
1.3.6.1.4.1.2356.800.2.2126.1.20.3	Notificationes2126DualMediaSwapped		current	Send the trap when the dual media port changed. The OID value means the port number.
1.3.6.1.4.1.2356.800.2.2126.1.20.4	Notificationes2126LoopDetected		current	Send the trap when loop condition has been detected. The OID value means the port number.
1.3.6.1.4.1.2356.800.2.2126.1.20.100	Notificationes2126StpStateDisabled		current	Send the trap when the operational state of STP is from enabled to disabled.
1.3.6.1.4.1.2356.800.2.2126.1.20.101	Notificationes2126StpStateEnabled		current	Send the trap when the operational state of STP is from disabled to enabled.
1.3.6.1.4.1.2356.800.2.2126.1.20.102	Notificationes2126StpTopologyChanged		current	Send the trap when RSTP determines a port should enter the FORWARDING state (a topology change occurs). The OID value is the ifIndex of the port that produces …
1.3.6.1.4.1.2356.800.2.2126.1.20.110	Notificationes2126RmonRisingAlarm		current	Send the trap when an RMON rising alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that exceeds its own Risin…
1.3.6.1.4.1.2356.800.2.2126.1.20.111	Notificationes2126RmonFallingAlarm		current	Send the trap when an RMON falling alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that is smaller than its …
1.3.6.1.4.1.2356.800.2.2126.1.20.120	Notificationes2126LacpStateDisabled		current	Send the trap when the operational state of LACP is from enabled to disabled. The OID value means the disabled Group ID.
1.3.6.1.4.1.2356.800.2.2126.1.20.121	Notificationes2126LacpStateEnabled		current	Send the trap when the operational state of LACP is from disabled to enabled. The OID value means the disabled Group ID.
1.3.6.1.4.1.2356.800.2.2126.1.20.123	Notificationes2126LacpPortAdded		current	Send the trap when the state of port is in 'trunk ready'.
1.3.6.1.4.1.2356.800.2.2126.1.20.124	Notificationes2126LacpPortTrunkFailure		current	Send the trap when one port is not able to be aggregated due to duplex-mode of the port.
1.3.6.1.4.1.2356.800.2.2126.1.20.140	Notificationes2126GvrpStateDisabled		current	Send the trap when the operational state of GVRP is from enabled to disabled.
1.3.6.1.4.1.2356.800.2.2126.1.20.141	Notificationes2126GvrpStateEnabled		current	Send the trap when the operational state of LACP is from disabled to enabled.
1.3.6.1.4.1.2356.800.2.2126.1.20.151	Notificationes2126VlanPortBaseEnabled		current	Send the trap when the operational state of vlan is changed to port-based vlan.
1.3.6.1.4.1.2356.800.2.2126.1.20.152	Notificationes2126VlanTagBaseEnabled		current	Send the trap when the operational state of vlan is changed to tag-based vlan.
1.3.6.1.4.1.2356.800.2.2126.1.20.153	Notificationes2126VlanMetroBaseEnabled		current	Send the trap when the operational state of vlan is changed to metro-based vlan.
1.3.6.1.4.1.2356.800.2.2126.1.20.200	Notificationes2126UserLogin		current	Send the trap when one user logins the system.
1.3.6.1.4.1.2356.800.2.2126.1.20.201	Notificationes2126UserLogout		current	Send the trap when one user logouts the system.
1.3.6.1.4.1.2356.800.2.2126.1.21	Nodees2126TrapVariable
1.3.6.1.4.1.2356.800.2.2126.1.21.1	Scalarusername	read-only	current	System account name.
1.3.6.1.4.1.2356.800.2.2126.1.21.2	ScalargroupId	read-only	current	The Trunk group ID of LACP.
1.3.6.1.4.1.2356.800.2.2126.1.21.3	Scalaractorkey	read-only	current	The actor key information for LACP.
1.3.6.1.4.1.2356.800.2.2126.1.21.4	Scalarpartnerkey	read-only	current	The partner key information for LACP.
1.3.6.1.4.1.2356.800.2.2126.1.21.5	Scalaruplink	read-only	current	Uplink port(s) in the metro-mode vlan.
1.3.6.1.4.1.2356.800.2.2126.1.21.6	ScalarloginProtectInfo	read-only	current	Loging protect information.
1.3.6.1.4.1.2356.800.2.2126.1.22	Nodees2126LoginProtect
1.3.6.1.4.1.2356.800.2.2126.1.22.1	Scalares2126LockMinutes	read-write	current	Set the login lock time. Available from 0 to 10 (minutes) Set 0 as disabled.
1.3.6.1.4.1.2356.800.2.2126.1.22.2	Scalares2126LoginErrors	read-write	current	Set login error count. Available from 0 to 10 (times) Set 0 as disabled.

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

LANCOM-ES-2126-MIB