LANCOM-ES-2126P-MIB
493 objects
The MIB module is for LANCOM Systems
Imported Objects
| BRIDGE-MIB | MacAddress |
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2356 | IdentitylancomSystems | The MIB module is for LANCOM Systems | ||
| 1.3.6.1.4.1.2356.800 | NodeswitchingSystems | |||
| 1.3.6.1.4.1.2356.800.2 | NodefastEthernetSwitches | |||
| 1.3.6.1.4.1.2356.800.2.2127 | NodelancomES2126P | |||
| 1.3.6.1.4.1.2356.800.2.2127.1 | Nodees2126pProduces | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.1 | Nodees2126pSystem | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.1.1 | Nodees2126pCommonSys | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.1.1.1 | Scalares2126pReboot | read-write | current | Reboot the system. Get this OID always return zero. 0 - do nothing 1 - Reboot without saving start 2 - Reboot with saving start |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.1.2 | Scalares2126pBiosVsersion | read-only | current | Get the BIOS version of the system. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.1.3 | Scalares2126pFirmwareVersion | read-only | current | Get the firmware version of the system. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.1.4 | Scalares2126pHardwareVersion | read-only | current | Get the hardware version of the system. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.1.5 | Scalares2126pMechanicalVersion | read-only | current | Get the mechanical version of the system. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.1.6 | Scalares2126pSerialNumber | read-only | current | Get the Serial number of the system. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.1.7 | Scalares2126pHostMacAddress | read-only | current | Get the MAC address of the system. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.1.8 | Scalares2126pDevicePort | read-only | current | Get the quantity of ports that this system owns now. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.1.9 | Scalares2126pRamSize | read-only | current | Get the RAM size of the system. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.1.10 | Scalares2126pFlashSize | read-only | current | Get the flash size of the system. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.1.11 | Scalares2126pSystemDescription | read-only | current | Get the system description. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.1.12 | Scalares2126pDeviceName | read-write | current | Get/Set the device Name. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.2 | Nodees2126pIP | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.1.2.1 | Scalares2126pDhcpSetting | read-write | current | Get/Set DHCP status of the system. 0 - DHCP disable 1 - DHCP enable |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.2.2 | Scalares2126pIPAddress | read-write | current | Get/Set the IP address of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.2.3 | Scalares2126pNetMask | read-write | current | Get/Set the subnet mask of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.2.4 | Scalares2126pDefaultGateway | read-write | current | Get/Set the default gateway of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.2.5 | Scalares2126pDnsSetting | read-write | current | Get/Set the source of DNS server. You can't set this OID if DHCP status is disabled. 0 - manual, the DNS server is from manual setting 1 - Auto, the DNS server… |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.2.6 | Scalares2126pDnsServer | read-write | current | Get/Set the DNS server of the system. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.3 | Nodees2126pTime | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.1.3.1 | Scalares2126pSystemCurrentTime | read-only | current | Get the current time of the system. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.3.2 | Scalares2126pManualTimeSetting | read-write | current | Get/Set the system time of the device. The input format is 'Year/Month/Day/Hour/Minute/Second'. Ex: 2004/1/1/12/34/25 means 2004/1/1 - 12:24:25. Value range: Y… |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.3.3 | Scalares2126pNTPServer | read-write | current | Get/Set the NTP Time Server. You can use the IP address or domain name. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.3.4 | Scalares2126pNTPTimeZone | read-write | current | Get/Set the NTP Time Zone. Value range is between -12 and 13 -12 - GMT -12:00, -11 - GMT -11:00, -10 - GMT -10:00, -9 - GMT -09:00, -8 - GMT -08:00, -7 - GMT -… |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.3.5 | Scalares2126pNTPTimeSync | read-write | current | Sync time from NTP Server. Get this OID always return zero. Set the Time Server and Time Zone before doing time sync. Notice that time server must be correct! … |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.3.6 | Scalares2126pDaylightSavingTime | read-write | current | Get/Set the daylight saving time. Value range is between -5 and 5. Unit: hour. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.3.7 | Scalares2126pDaylightStartTime | read-write | current | Get/Set the Start time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. Example: month/day/hour 10/01… |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.3.8 | Scalares2126pDaylightEndTime | read-write | current | Get/Set the End time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. Example: month/day/hour 04/01/0… |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.4 | Nodees2126pAccount | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.1.4.1 | Scalares2126pAccountNumber | read-only | current | Get the current account number(s) of the system. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.4.2 | Tablees2126pAccountTable | not-accessible | current | This is a list of es2126pAccountEntry. The numbers of entries are given by the value of es2126pAccountNumber. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.4.2.1 | Rowes2126pAccountEntry | not-accessible | current | This is the Entry(s) for account information. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.4.2.1.1 | Columnes2126pAccountIndex | read-only | current | This is the index of the account entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.4.2.1.2 | Columnes2126pAccountAuthorization | read-only | current | This is the authorization of the account entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.4.2.1.3 | Columnes2126pAccountName | read-write | current | This is the username of the account entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.4.2.1.4 | Columnes2126pAccountPassword | read-write | current | This is the password of the account entry. The return value is always '********'. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.4.3 | Scalares2126pAccountAddName | read-write | current | This is the account name for adding operation. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.4.4 | Scalares2126pAccountAddPassword | read-write | current | This is the account password for adding operation. The return value is always '********'. |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.4.5 | Scalares2126pDoAccountAdd | read-write | current | Add account name. OID es2126pAccountAddName and es2126pAccountAddPassword must be filled first. Get this OID always return zero. 1 - Add account. 0 - do nothin… |
| 1.3.6.1.4.1.2356.800.2.2127.1.1.4.6 | Scalares2126pAccountDel | read-write | current | Delete account. The value is valid es2126pAccountIndex(Can't delete administrator). |
| 1.3.6.1.4.1.2356.800.2.2127.1.2 | Nodees2126pSnmp | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.2.1 | Scalares2126pGetCommunity | read-write | current | Get/Set the get-community of the SNMP. |
| 1.3.6.1.4.1.2356.800.2.2127.1.2.2 | Scalares2126pSetCommunity | read-write | current | Get/Set the set-community of the SNMP. |
| 1.3.6.1.4.1.2356.800.2.2127.1.2.3 | Scalares2126pTrapHostNumber | read-only | current | Get the number of trap hosts. |
| 1.3.6.1.4.1.2356.800.2.2127.1.2.4 | Tablees2126pTrapHostTable | not-accessible | current | This is a list of trap host entry. The numbers of entries are given by the value of es2126pTrapHostNumber. |
| 1.3.6.1.4.1.2356.800.2.2127.1.2.4.1 | Rowes2126pTrapHostEntry | not-accessible | current | This is the Entry Information for trap host. |
| 1.3.6.1.4.1.2356.800.2.2127.1.2.4.1.1 | Columnes2126pTrapHostIndex | read-only | current | The index of the trap host entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.2.4.1.2 | Columnes2126pTrapHostIP | read-write | current | This is the IP of the trap host. |
| 1.3.6.1.4.1.2356.800.2.2127.1.2.4.1.3 | Columnes2126pTrapHostPort | read-write | current | This is the receiving-port number of the trap host. |
| 1.3.6.1.4.1.2356.800.2.2127.1.2.4.1.4 | Columnes2126pTrapHostCommunity | read-write | current | The community name for the trap PDU. |
| 1.3.6.1.4.1.2356.800.2.2127.1.2.5 | Scalares2126pRegisterMonitor | read-write | current | Register-Monitor |
| 1.3.6.1.4.1.2356.800.2.2127.1.2.6 | Scalares2126pDeleteMonitor | read-write | current | Delete-Monitor |
| 1.3.6.1.4.1.2356.800.2.2127.1.2.7 | Tablees2126pMonitorTable | not-accessible | current | Monitor-Table |
| 1.3.6.1.4.1.2356.800.2.2127.1.2.7.1 | Rowes2126pMonitorEntry | not-accessible | current | entry in table |
| 1.3.6.1.4.1.2356.800.2.2127.1.2.7.1.1 | Columnes2126pMonitorTableIp | read-only | current | IP-Address |
| 1.3.6.1.4.1.2356.800.2.2127.1.2.7.1.2 | Columnes2126pMonitorTableMac | read-only | current | MAC-Address |
| 1.3.6.1.4.1.2356.800.2.2127.1.2.8 | Scalares2126pTrapBootDelayTime | read-write | current | Get/Set trap boot delay time in second. Default: 0 |
| 1.3.6.1.4.1.2356.800.2.2127.1.3 | Nodees2126pAlarm | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.3.1 | Nodees2126pEvent | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.3.1.1 | Scalares2126pEventNumber | read-only | current | Get the total number of alarm events. |
| 1.3.6.1.4.1.2356.800.2.2127.1.3.1.2 | Tablees2126pEventTable | not-accessible | current | This is a list of alarm event entry. The numbers of entries are given by the value of es2126pEventNumber. |
| 1.3.6.1.4.1.2356.800.2.2127.1.3.1.2.1 | Rowes2126pEventEntry | not-accessible | current | This is the entry information for alarm event. |
| 1.3.6.1.4.1.2356.800.2.2127.1.3.1.2.1.1 | Columnes2126pEventIndex | read-only | current | This is the index of the alarm event entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.3.1.2.1.2 | Columnes2126pEventName | read-only | current | This is the alarm event name. |
| 1.3.6.1.4.1.2356.800.2.2127.1.3.1.2.1.3 | Columnes2126pEventSendEmail | read-write | current | Send email when alarm event is triggered. |
| 1.3.6.1.4.1.2356.800.2.2127.1.3.1.2.1.4 | Columnes2126pEventSendTrap | read-write | current | Send trap when alarm event is triggered. |
| 1.3.6.1.4.1.2356.800.2.2127.1.3.2 | Nodees2126pEmail | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.3.2.1 | Scalares2126pEmailServer | read-write | current | This is the SMTP server for alarm event. |
| 1.3.6.1.4.1.2356.800.2.2127.1.3.2.2 | Scalares2126pEmailUsername | read-write | current | This is the Username of SMTP server. |
| 1.3.6.1.4.1.2356.800.2.2127.1.3.2.3 | Scalares2126pEmailPassword | read-write | current | This is the User Password of SMTP server. |
| 1.3.6.1.4.1.2356.800.2.2127.1.3.2.4 | Scalares2126pEmailSender | read-write | current | This is the Sender of SMTP server. |
| 1.3.6.1.4.1.2356.800.2.2127.1.3.2.5 | Scalares2126pEmailReturnPath | read-write | current | This is the return path of mail. |
| 1.3.6.1.4.1.2356.800.2.2127.1.3.2.6 | Scalares2126pEmailUserNumber | read-only | current | The number of the email users that you want to send the alarm notification. |
| 1.3.6.1.4.1.2356.800.2.2127.1.3.2.7 | Tablees2126pEmailUserTable | not-accessible | current | This is a list of email user entry. The numbers of entries are given by the value of es2126pEmailUserNumber. |
| 1.3.6.1.4.1.2356.800.2.2127.1.3.2.7.1 | Rowes2126pEmailUserEntry | not-accessible | current | This is the Entry information for email user entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.3.2.7.1.1 | Columnes2126pEmailUserIndex | read-only | current | This is the index of the email user entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.3.2.7.1.2 | Columnes2126pEmailUserAddress | read-write | current | This is the email address of the email user entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.4 | Nodees2126pTftp | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.4.1 | Scalares2126pRemoteTftpServer | read-write | current | Get/Set the remote tftp server. |
| 1.3.6.1.4.1.2356.800.2.2127.1.4.2 | Scalares2126pInternalTftpServerState | read-write | current | Get/Set internal tftp server state. 0 : Disable 1 : Enable |
| 1.3.6.1.4.1.2356.800.2.2127.1.5 | Nodees2126pConfiguration | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.5.1 | Nodees2126pSaveRestore | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.5.1.1 | Scalares2126pSaveStart | read-write | current | Save current configuration into flash memory (Save as Start Configuration). Get this OID always return zero. 1 - Save. 0 - do nothing. |
| 1.3.6.1.4.1.2356.800.2.2127.1.5.1.2 | Scalares2126pSaveUser | read-write | current | Save current configuration into flash memory (Save as User Configuration). Get this OID always return zero. 1 - Save. 0 - do nothing. |
| 1.3.6.1.4.1.2356.800.2.2127.1.5.1.3 | Scalares2126pRestoreDefault | read-write | current | Restore factory default configuration. Get this OID always return zero. 2 - Restore default included default ip address. 1 - Restore default without changing c… |
| 1.3.6.1.4.1.2356.800.2.2127.1.5.1.4 | Scalares2126pRestoreUser | read-write | current | Restore user configuration. Get this OID always return zero. 1 - Restore. 0 - do nothing. |
| 1.3.6.1.4.1.2356.800.2.2127.1.5.2 | Nodees2126pConfigFile | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.5.2.1 | Scalares2126pExportConfigName | read-write | current | Get/Set the export file path and name. |
| 1.3.6.1.4.1.2356.800.2.2127.1.5.2.2 | Scalares2126pDoExportConfig | read-write | current | Do export-config. Get this OID always return zero. 1 - Export start section. 2 - Export user-conf section. |
| 1.3.6.1.4.1.2356.800.2.2127.1.5.2.3 | Scalares2126pImportConfigName | read-write | current | Get/Set the import file path and name. |
| 1.3.6.1.4.1.2356.800.2.2127.1.5.2.4 | Scalares2126pDoImportConfig | read-write | current | Do import-config. Get this OID always return zero. 1 - Import start section. 2 - Import user-conf section. 3 - Import start and overwrite current ip. |
| 1.3.6.1.4.1.2356.800.2.2127.1.6 | Nodees2126pDiagnostic | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.6.1 | Scalares2126pEEPROMTest | read-only | current | EEPROM access test. |
| 1.3.6.1.4.1.2356.800.2.2127.1.6.2 | Scalares2126pUartTest | read-only | current | UART access test. |
| 1.3.6.1.4.1.2356.800.2.2127.1.6.3 | Scalares2126pDramTest | read-only | current | DRAM access test. |
| 1.3.6.1.4.1.2356.800.2.2127.1.6.4 | Scalares2126pFlashTest | read-only | current | Flash memory access test. |
| 1.3.6.1.4.1.2356.800.2.2127.1.6.5 | Scalares2126pInternalLoopbackTest | read-only | current | Internal loop back test. |
| 1.3.6.1.4.1.2356.800.2.2127.1.6.6 | Scalares2126pExternalLoopbackTest | read-only | current | External loop back test. |
| 1.3.6.1.4.1.2356.800.2.2127.1.6.7 | Scalares2126pPingTest | read-write | current | Set the host address that you want to ping and the system will return the test result. |
| 1.3.6.1.4.1.2356.800.2.2127.1.7 | Nodees2126pLog | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.7.1 | Scalares2126pClearLog | read-write | current | Clear system log. Get this OID always return zero. 1 - Clear log. 0 - do nothing. |
| 1.3.6.1.4.1.2356.800.2.2127.1.7.2 | Scalares2126pUploadLog | read-write | current | Upload current system log. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return zero.… |
| 1.3.6.1.4.1.2356.800.2.2127.1.7.3 | Scalares2126pAutoUploadLogState | read-write | current | Enable auto-upload log function. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return… |
| 1.3.6.1.4.1.2356.800.2.2127.1.7.4 | Scalares2126pLogNumber | read-only | current | Get the number of current system log. |
| 1.3.6.1.4.1.2356.800.2.2127.1.7.5 | Tablees2126pLogTable | not-accessible | current | This is a list of log entry. The numbers of entries are given by the value of es2126pLogNumber. |
| 1.3.6.1.4.1.2356.800.2.2127.1.7.5.1 | Rowes2126pLogEntry | not-accessible | current | This is the Entry information for system log. |
| 1.3.6.1.4.1.2356.800.2.2127.1.7.5.1.1 | Columnes2126pLogIndex | read-only | current | This is the index of the log entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.7.5.1.2 | Columnes2126pLogEvent | read-only | current | This is the detail information of the log entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.8 | Nodees2126pFirmware | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.8.1 | Scalares2126pFirmwareFileName | read-write | current | Get/Set the path and filename for firmware upgrading. |
| 1.3.6.1.4.1.2356.800.2.2127.1.8.2 | Scalares2126pDoFirmwareUpgrade | read-write | current | Do firmware upgrade. Get this OID always return zero. 1 - Do firmware upgrade. 0 - do nothing. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9 | Nodees2126pPort | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.9.1 | Nodees2126pPortStatus | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.9.1.1 | Scalares2126pPortStatusNumber | read-only | current | Get the number of port. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.1.2 | Tablees2126pPortStatusTable | not-accessible | current | This is a list of port status entry. The numbers of entries are given by the value of es2126pPortStatusNumber. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.1.2.1 | Rowes2126pPortStatusEntry | not-accessible | current | This is the entry(s) for port status information. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.1.2.1.1 | Columnes2126pPortStatusIndex | read-only | current | This is the index of the port status entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.1.2.1.2 | Columnes2126pPortStatusMedia | read-only | current | The port media type of the port status entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.1.2.1.3 | Columnes2126pPortStatusLink | read-only | current | This is the port link of the port status entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.1.2.1.4 | Columnes2126pPortStatusPortState | read-only | current | This is the port state of the port status entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.1.2.1.5 | Columnes2126pPortStatusAutoNego | read-only | current | This is the auto negotiation of the port status entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.1.2.1.6 | Columnes2126pPortStatusSpdDpx | read-only | current | This is the speed/duplex of the port status entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.1.2.1.7 | Columnes2126pPortStatusRxPause | read-only | current | The Rx Pause of the port status entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.1.2.1.8 | Columnes2126pPortStatusTxPause | read-only | current | The Tx Pause of the port status entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.1.2.1.9 | Columnes2126pPortStatusDescription | read-only | current | This is the description of port. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.2 | Nodees2126pPortConf | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.9.2.1 | Scalares2126pPortConfNumber | read-only | current | Get the number of port configuration. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.2.2 | Tablees2126pPortConfTable | not-accessible | current | This is a list of port configuration entry. The numbers of entries are given by the value of es2126pPortConfNumber. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.2.2.1 | Rowes2126pPortConfEntry | not-accessible | current | This is the Entry(s) for port configuration information. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.2.2.1.1 | Columnes2126pPortConfIndex | read-only | current | This is the index of the port configuration entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.2.2.1.2 | Columnes2126pPortConfPortState | read-write | current | This is the port state of the port configuration entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.2.2.1.3 | Columnes2126pPortConfSpdDpx | read-write | current | This is the speed/duplex of the port configuration entry. 0 - auto. 1 - 10M/Half. 2 - 10M/Full. 3 - 100M/Half. 4 - 100M/Full. 5 - 1G/Full. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.2.2.1.4 | Columnes2126pPortConfFlwCtrl | read-write | current | This is the flow control of the port configuration entry. 0 - asymmetric. 1 - symmetric. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.2.2.1.5 | Columnes2126pPortConfDescription | read-write | current | This is the description of port. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.3 | Nodees2126pPortBandwidth | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.9.3.1 | Tablees2126pPortBandwidthTable | not-accessible | current | This is a list of port bandwidth entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.3.1.1 | Rowes2126pPortBandwidthEntry | not-accessible | current | This is the Entry(s) for port bandwidth configuration. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.3.1.1.1 | Columnes2126pPortBandwidthIndex | read-only | current | This is the index of the port bandwidth entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.3.1.1.2 | Columnes2126pPortBandwidthIngressRate | read-write | current | Get/Set the port bandwidth ingress rate. Fast Ethernet port range: 66~102400(Kb) Gigabit Ethernet port range: 66~1024000(Kb) |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.3.1.1.3 | Columnes2126pPortBandwidthEgressRate | read-write | current | Get/Set the port bandwidth egress rate. Fast Ethernet port range: 66~102400(Kb) Gigabit Ethernet port range: 66~1024000(Kb) |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.3.2 | Scalares2126pPortBandwidthStormType | read-write | current | This is the bandwidth storm type. 0:Disable 1:Broadcast Storm Control 2:Multicast Storm Control 3:Unknown Unicast Storm Control 4:Broadcast, Multicast, and Unk… |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.3.3 | Scalares2126pPortBandwidthStormRate | read-write | current | This is the storm rate. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.4 | Nodees2126pPortSFPInfo | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.9.4.1 | Scalares2126pPortSFPInfoNumber | read-only | current | Get the number of sfp info entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.4.2 | Tablees2126pPortSFPInfoTable | not-accessible | current | A list of sfp info entry. The numbers of entries are given by the value of es2126pPortSFPInfoNumber. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.4.2.1 | Rowes2126pPortSFPInfoEntry | not-accessible | current | Entry(s) for SFP information. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.4.2.1.1 | Columnes2126pPortSFPInfoIndex | read-only | current | The index of the sfp info entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.4.2.1.2 | Columnes2126pPortSFPConnectorType | read-only | current | Get connector type of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.4.2.1.3 | Columnes2126pPortSFPFiberType | read-only | current | Get fiber type of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.4.2.1.4 | Columnes2126pPortSFPWavelength | read-only | current | Get tx central wavelength of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.4.2.1.5 | Columnes2126pPortSFPBaudRate | read-only | current | Get baud rate of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.4.2.1.6 | Columnes2126pPortSFPVendorOUI | read-only | current | Get vendor OUI of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.4.2.1.7 | Columnes2126pPortSFPVendorName | read-only | current | Get vendor name of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.4.2.1.8 | Columnes2126pPortSFPVendorPN | read-only | current | Get vendor part number of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.4.2.1.9 | Columnes2126pPortSFPVendorRev | read-only | current | Get vendor revision number of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.4.2.1.10 | Columnes2126pPortSFPVendorSN | read-only | current | Get vendor serial number of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.4.2.1.11 | Columnes2126pPortSFPDateCode | read-only | current | Get data code of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.4.2.1.12 | Columnes2126pPortSFPTemperature | read-only | current | Get current temperature of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.4.2.1.13 | Columnes2126pPortSFPVcc | read-only | current | Get current internal supply voltage of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.4.2.1.14 | Columnes2126pPortSFPTxBias | read-only | current | Get current TX Bias of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.4.2.1.15 | Columnes2126pPortSFPTxPWR | read-only | current | Get current TX output power of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2127.1.9.4.2.1.16 | Columnes2126pPortSFPRxPWR | read-only | current | Get current Received Power of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2127.1.10 | Nodees2126pLoopDetectedConf | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.10.1 | Scalares2126pLoopDetectedNumber | read-only | current | Get the number of loop detected entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.10.2 | Tablees2126pLoopDetectedTable | not-accessible | current | This is a list of loop detected entry. The number of entries are given by the value of es2126pLoopDetectedNumber. |
| 1.3.6.1.4.1.2356.800.2.2127.1.10.2.1 | Rowes2126pLoopDetectedEntry | not-accessible | current | Entry(s) for loop detected information. |
| 1.3.6.1.4.1.2356.800.2.2127.1.10.2.1.1 | Columnes2126pLoopDetectedfIndex | read-only | current | This is the index of the loop detected entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.10.2.1.2 | Columnes2126pLoopDetectedStateEbl | read-write | current | The state of the loop detected entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.2356.800.2.2127.1.10.2.1.3 | Columnes2126pLoopDetectedCurrentStatus | read-only | current | The current status of the loop detected port. 0 - Unlocked 1 - Locked due to the loop condition |
| 1.3.6.1.4.1.2356.800.2.2127.1.10.2.1.4 | Columnes2126pLoopDetectedResumed | read-write | current | Unlock the port which is locked due to loop condition. Get this OID always return zero. 1 - Unlock the port, 0 - do nothing. |
| 1.3.6.1.4.1.2356.800.2.2127.1.10.3 | Scalares2126pLoopDetectedAction | read-write | current | Set the corresponding action while loop is detected. 1 - Lock the loop port, 0 - do nothing. |
| 1.3.6.1.4.1.2356.800.2.2127.1.11 | Nodees2126pMacTableInfo | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.11.1 | Nodees2126pMacTableMaintenance | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.11.1.1 | Scalares2126pMacTableAgingTime | read-write | current | Set the Mac Table Aging Time (10~1000000 Secs). 0 : Disable. |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.1.2 | Scalares2126pMacTableFlush | read-write | current | 1 : Flush Mac Table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.1.3 | Tablees2126pMacTableLearnPortLimitTable | not-accessible | current | This is a list of MAC Learning Limitentry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.1.3.1 | Rowes2126pMacTableLearnPortLimitEntry | not-accessible | current | Entry(s) for Mac Table Port Learning Limit. |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.1.3.1.1 | Columnes2126pMacTableLearnPortLimitIndex | not-accessible | current | The index of the Mac Table Learning Limit entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.1.3.1.2 | Columnes2126pMacTableLearnPortLimit | read-write | current | Port Learning Limit (0~8191). |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.3 | Nodees2126pMacTableStaticMac | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.11.3.1 | Scalares2126pMacTableStaticMacNumber | read-only | current | This is number of static Mac table entry |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.3.2 | Scalares2126pMacTableStaticMacEntryCreate | read-write | current | Creat a static mac entry. Set 1: add a new entry, Get: the number means index. |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.3.3 | Tablees2126pMacTableStaticMacTable | not-accessible | current | This is a list of static MAC table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.3.3.1 | Rowes2126pMacTableStaticMacEntry | not-accessible | current | Entry(s) for Static Mac Table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.3.3.1.1 | Columnes2126pMacTableStaticMacIndex | not-accessible | current | The index of the static Mac Table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.3.3.1.2 | Columnes2126pMacTableStaticMacAddress | read-write | current | The mac address of the static mac table entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.3.3.1.3 | Columnes2126pMacTableStaticMacVid | read-write | current | The vlan id of the static mac table entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.3.3.1.4 | Columnes2126pMacTableStaticMacQueue | read-write | current | The queue of the static mac table entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.3.3.1.5 | Columnes2126pMacTableStaticMacFwRule | read-write | current | The forwarding rule of the static mac table entry. 0 : static 1 : Static with Destination Drop 2 : Static with Source Drop |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.3.3.1.6 | Columnes2126pMacTableStaticMacPort | read-write | current | The port of the static mac table entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.3.3.1.7 | Columnes2126pMacTableStaticMacEntryAction | read-write | current | The action of the static mac table entry. 1:action 2:non-action 3:delete |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.4 | Nodees2126pMacTableMacAlias | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.11.4.1 | Scalares2126pMacTableMacAliasNumber | read-only | current | This is number of static Mac table entry |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.4.2 | Scalares2126pMacTableMacAliasEntryCreate | read-write | current | Creat a static mac alias entry. Set 1: add a new entry, Get: the number means index. |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.4.3 | Tablees2126pMacTableMacAliasTable | not-accessible | current | This is a list of MAC Alias table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.4.3.1 | Rowes2126pMacTableMacAliasEntry | not-accessible | current | Entry(s) for Alias Mac Table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.4.3.1.1 | Columnes2126pMacTableMacAliasIndex | not-accessible | current | The index of the Alias Mac Table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.4.3.1.2 | Columnes2126pMacTableMacAliasAddress | read-write | current | The Mac address of the Alias Mac Table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.4.3.1.3 | Columnes2126pMacTableMacAliasAlias | read-write | current | The Mac Alias of the Alias Mac Table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.11.4.3.1.4 | Columnes2126pMacTableMacAliasEntryAction | read-write | current | The action of the alias mac table entry. 1:action 2:non-action 3:delete |
| 1.3.6.1.4.1.2356.800.2.2127.1.12 | Nodees2126pGVRPInfo | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.12.1 | Nodees2126pGvrpConf | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.12.1.1 | Scalares2126pGvrpConfState | read-write | current | The state of GVRP. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.1.2 | Tablees2126pGvrpConfTable | not-accessible | current | This is a list of the GVRP conf table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.1.2.1 | Rowes2126pGvrpConfEntry | not-accessible | current | Entry(s) for the GVRP conf table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.1.2.1.1 | Columnes2126pGvrpConfIndex | not-accessible | current | The index of the GVRP conf table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.1.2.1.2 | Columnes2126pGvrpConfJoinTime | read-write | current | The join time of the GVRP entry. range: 20~100 default 20 centisecond |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.1.2.1.3 | Columnes2126pGvrpConfLeaveTime | read-write | current | The leave time of the GVRP entry. range: 60~300 default:60 centisecond |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.1.2.1.4 | Columnes2126pGvrpConfLeaveAllTime | read-write | current | The leave all time of the GVRP entry. range: 1000~5000 default: 1000 unit time |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.1.2.1.5 | Columnes2126pGvrpConfDefaultAppMode | read-write | current | The default application mode of the GVRP entry. 0 - Normal 1 - Non-Participant default: Normal |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.1.2.1.6 | Columnes2126pGvrpConfDefaultRegMode | read-write | current | The default registrar mode of the GVRP entry. 0 - Normal 1 - Fixed 2 - Forbidden default: Normal |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.1.2.1.7 | Columnes2126pGvrpConfRestrictedMode | read-write | current | The restricted mode of the GVRP entry. 0 - Disable 1 - Enable default: Disable |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.2 | Nodees2126pGvrpCounter | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.12.2.1 | Tablees2126pGvrpCounterTable | not-accessible | current | This is a list of the GVRP counter table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.2.1.1 | Rowes2126pGvrpCounterEntry | not-accessible | current | Entry(s) for the GVRP counter table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.2.1.1.1 | Columnes2126pGvrpCounterIndex | not-accessible | current | The port index of the GVRP counter table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.2.1.1.2 | Columnes2126pGvrpCounterRxTotalGvrpPkts | read-only | current | This is Rx Total GVRP packet counters. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.2.1.1.3 | Columnes2126pGvrpCounterRxInvalidGvrpPkts | read-only | current | This is Rx Invalid GVRP packet counters. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.2.1.1.4 | Columnes2126pGvrpCounterRxLeaveAllMsg | read-only | current | This is Rx LeaveAll message packet counters. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.2.1.1.5 | Columnes2126pGvrpCounterRxJoinEmptyMsg | read-only | current | This is Rx JoinEmpty message packet counters. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.2.1.1.6 | Columnes2126pGvrpCounterRxJoinInMsg | read-only | current | This is Rx JoinIn message packet counters. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.2.1.1.7 | Columnes2126pGvrpCounterRxLeaveEmptyMsg | read-only | current | This is Rx LeaveEmpty message packet counters. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.2.1.1.8 | Columnes2126pGvrpCounterRxEmptyMsg | read-only | current | This is Rx Empty message packet counters. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.2.1.1.9 | Columnes2126pGvrpCounterTxTotalGvrpPkts | read-only | current | This is Tx Total GVRP packet counters. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.2.1.1.10 | Columnes2126pGvrpCounterTxLeaveAllMsg | read-only | current | This is Tx LeaveAll message packet counters. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.2.1.1.11 | Columnes2126pGvrpCounterTxJoinEmptyMsg | read-only | current | This is Tx JoinEmpty message packet counters. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.2.1.1.12 | Columnes2126pGvrpCounterTxJoinInMsg | read-only | current | This is Tx JoinIn message packet counters. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.2.1.1.13 | Columnes2126pGvrpCounterTxLeaveEmptyMsg | read-only | current | This is Tx LeaveEmpty message packet counters. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.2.1.1.14 | Columnes2126pGvrpCounterTxEmptyMsg | read-only | current | This is Tx Empty message packet counters. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.3 | Nodees2126pGvrpGroup | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.12.3.1 | Scalares2126pGvrpGroupNumber | read-only | current | This is number of the GVRP group table entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.3.2 | Tablees2126pGvrpGroupTable | not-accessible | current | This is a list of the GVRP group table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.3.2.1 | Rowes2126pGvrpGroupEntry | not-accessible | current | Entry(s) for the GVRP group table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.3.2.1.1 | Columnes2126pGvrpGroupId | read-only | current | The index of the GVRP group table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.3.2.1.2 | Columnes2126pGvrpGroupVid | read-only | current | This is vid of GVRP group. |
| 1.3.6.1.4.1.2356.800.2.2127.1.12.3.2.1.3 | Columnes2126pGvrpGroupMemberPort | read-only | current | This is the member port of GVRP group. |
| 1.3.6.1.4.1.2356.800.2.2127.1.13 | Nodees2126pSecurity | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.13.1 | Scalares2126pIsolatedPortGroup | read-write | current | This is isolated group. 0: Disable |
| 1.3.6.1.4.1.2356.800.2.2127.1.13.2 | Nodees2126pMirror | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.13.2.1 | Scalares2126pMirrorMode | read-write | current | This is mirror mode. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.2356.800.2.2127.1.13.2.2 | Scalares2126pMonitoringPort | read-write | current | This is monitoring port. |
| 1.3.6.1.4.1.2356.800.2.2127.1.13.2.3 | Scalares2126pMonitoredIngressPort | read-write | current | This is monitored ingress ports. |
| 1.3.6.1.4.1.2356.800.2.2127.1.13.2.4 | Scalares2126pMonitoredEgressPort | read-write | current | This is monitored egress ports. |
| 1.3.6.1.4.1.2356.800.2.2127.1.14 | Nodees2126pVirtualStack | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.14.1 | Scalares2126pVirtualStackState | read-write | current | Set the Virtual Stack State. 0 : disable, 1 : enable |
| 1.3.6.1.4.1.2356.800.2.2127.1.14.2 | Scalares2126pVirtualStackRole | read-write | current | Set the Virtual Stack Role. 0 : slave, 1 : master |
| 1.3.6.1.4.1.2356.800.2.2127.1.14.3 | Scalares2126pVirtualStackGroupID | read-write | current | Set the Virtual Stack Group ID. |
| 1.3.6.1.4.1.2356.800.2.2127.1.15 | Nodees2126pManagementSecurity | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.15.1 | Scalares2126pManagementSecurityNumber | read-only | current | This is number of the management security table entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.15.2 | Scalares2126pManagementSecurityEntryCreate | read-write | current | Creat a management security entry. Set 1: add a new entry, Get: the number means index. |
| 1.3.6.1.4.1.2356.800.2.2127.1.15.3 | Tablees2126pManagementSecurityTable | not-accessible | current | This is a list of the management security table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.15.3.1 | Rowes2126pManagementSecurityEntry | not-accessible | current | Entry(s) for the management security table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.15.3.1.1 | Columnes2126pManagementSecurityIndex | not-accessible | current | The index of the management security table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.15.3.1.2 | Columnes2126pManagementSecurityName | read-write | current | The name of the management security entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.15.3.1.3 | Columnes2126pManagementSecurityVid | read-write | current | This is the vid of the management security entry. 0: any VID. |
| 1.3.6.1.4.1.2356.800.2.2127.1.15.3.1.4 | Columnes2126pManagementSecurityIpRange | read-write | current | This is the IP range of the management security entry. 0: any IP. |
| 1.3.6.1.4.1.2356.800.2.2127.1.15.3.1.5 | Columnes2126pManagementSecurityIncomigPort | read-write | current | This is the ports of the management security entry. 0: any incoming port. |
| 1.3.6.1.4.1.2356.800.2.2127.1.15.3.1.6 | Columnes2126pManagementSecurityAccessType | read-write | current | This is the access type of the management security entry. for example: http,snmp,telnet,https,ssh for example: http,telnet for example: any any means http,snmp… |
| 1.3.6.1.4.1.2356.800.2.2127.1.15.3.1.7 | Columnes2126pManagementSecurityAction | read-write | current | This is the action of the management security entry. 0:deny 1:accept |
| 1.3.6.1.4.1.2356.800.2.2127.1.15.3.1.8 | Columnes2126pManagementSecurityEntryAction | read-write | current | The action the management security entry. 1:action 2:non-action 3:delete |
| 1.3.6.1.4.1.2356.800.2.2127.1.16 | Nodees2126pQoS | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.16.1 | Nodees2126pQoSGlobalConfig | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.16.1.1 | Scalares2126pQoSMode | read-write | current | The mode of QoS. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.1.2 | Scalares2126pQosPriorityControl1p | read-write | current | This is the priority control for 802.1p. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.1.3 | Scalares2126pQosPriorityControlTOS | read-write | current | This is the priority control for TOS. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.1.4 | Scalares2126pQosPriorityControlDSCP | read-write | current | This is the priority control for DSCP. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.1.5 | Scalares2126pQoSSchedulingMethod | read-write | current | This is the scheduling method. 0 - WRR 1 - Strict |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.1.6 | Scalares2126pQoSWeightQ0 | read-write | current | This is the weigtht of Queue0. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.1.7 | Scalares2126pQoSWeightQ1 | read-write | current | This is the weigtht of Queue1. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.1.8 | Scalares2126pQoSWeightQ2 | read-write | current | This is the weigtht of Queue2. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.1.9 | Scalares2126pQoSWeightQ3 | read-write | current | This is the weigtht of Queue3. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.2 | Scalares2126pQoSVIPPort | read-write | current | This is the VIP group for QoS. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.3 | Nodees2126pQoS1pPriority | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.16.3.1 | Tablees2126pQoS1pPriorityTable | not-accessible | current | This is a list of the 802.1p. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.3.1.1 | Rowes2126pQoS1pPriorityEntry | not-accessible | current | Entry(s) for the 802.1p priority table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.3.1.1.1 | Columnes2126pQoS1pPriorityIndex | not-accessible | current | The index of the 802.1p priority table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.3.1.1.2 | Columnes2126pQoS1pPriorityValue | read-only | current | The value of 802.1p priority entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.3.1.1.3 | Columnes2126pQoS1pPriorityQueue | read-write | current | The queue of 802.1p priority entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.4 | Nodees2126pQoSDTypeTOSPriority | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.16.4.1 | Tablees2126pQoSDTypeTOSPriorityTable | not-accessible | current | This is a list of the TOS delay priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.4.1.1 | Rowes2126pQoSDTypeTOSPriorityEntry | not-accessible | current | Entry(s) for the ToS delay priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.4.1.1.1 | Columnes2126pQoSDTypeTOSPriorityIndex | not-accessible | current | The index of the ToS delay priority mapping table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.4.1.1.2 | Columnes2126pQoSDTypeTOSPriorityValue | read-only | current | The value of ToS delay priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.4.1.1.3 | Columnes2126pQoSDTypeTOSPriorityQueue | read-write | current | The queue of ToS delay priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.5 | Nodees2126pQoSTTypeTOSPriority | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.16.5.1 | Tablees2126pQoSTTypeTOSPriorityTable | not-accessible | current | This is a list of the ToS throughput priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.5.1.1 | Rowes2126pQoSTTypeTOSPriorityEntry | not-accessible | current | Entry(s) for the TOS Throughput mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.5.1.1.1 | Columnes2126pQoSTTypeTOSPriorityIndex | not-accessible | current | The index of the TOS throughput priority mapping table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.5.1.1.2 | Columnes2126pQoSTTypeTOSPriorityValue | read-only | current | The value of TOS throughput priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.5.1.1.3 | Columnes2126pQoSTTypeTOSPriorityQueue | read-write | current | The queue of TOS throughput priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.6 | Nodees2126pQoSRTypeTOSPriority | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.16.6.1 | Tablees2126pQoSRTypeTOSPriorityTable | not-accessible | current | This is a list of the ToS reliability priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.6.1.1 | Rowes2126pQoSRTypeTOSPriorityEntry | not-accessible | current | Entry(s) for the TOS reliability mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.6.1.1.1 | Columnes2126pQoSRTypeTOSPriorityIndex | not-accessible | current | The index of the TOS reliability priority mapping table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.6.1.1.2 | Columnes2126pQoSRTypeTOSPriorityValue | read-only | current | The value of TOS reliability priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.6.1.1.3 | Columnes2126pQoSRTypeTOSPriorityQueue | read-write | current | The queue of TOS reliability priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.7 | Nodees2126pQoSMTypeTOSPriority | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.16.7.1 | Tablees2126pQoSMTypeTOSPriorityTable | not-accessible | current | This is a list of the ToS monetary cost priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.7.1.1 | Rowes2126pQoSMTypeTOSPriorityEntry | not-accessible | current | Entry(s) for the TOS monetary cost mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.7.1.1.1 | Columnes2126pQoSMTypeTOSPriorityIndex | not-accessible | current | The index of the TOS monetary cost priority mapping table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.7.1.1.2 | Columnes2126pQoSMTypeTOSPriorityValue | read-only | current | The value of TOS monetary cost priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.7.1.1.3 | Columnes2126pQoSMTypeTOSPriorityQueue | read-write | current | The queue of TOS monetary cost priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.8 | Nodees2126pQoSDSCPPriority | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.16.8.1 | Tablees2126pQoSDSCPPriorityTable | not-accessible | current | This is a list of the DSCP priority entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.8.1.1 | Rowes2126pQoSDSCPPriorityEntry | not-accessible | current | Entry(s) for the DSCP priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.8.1.1.1 | Columnes2126pQoSDSCPPriorityIndex | not-accessible | current | The index of the DSCP priority priority mapping table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.8.1.1.2 | Columnes2126pQoSDSCPPriorityValue | read-only | current | The value of DSCP priority priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.16.8.1.1.3 | Columnes2126pQoSDSCPPriorityQueue | read-write | current | The queue of DSCP priority priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.17 | Nodees2126pVlan | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.17.1 | Nodees2126pVlanModeConfig | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.17.1.1 | Scalares2126pVlanMode | read-write | current | 0:Tag-based, 1:Port-based, 2:Metro mode |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.1.2 | Scalares2126pSymmetricVlan | read-write | current | Symmetric VLAN: for tag-based 0:disable, 1:enable |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.1.3 | Scalares2126pVlanSVL | read-write | current | SVL: : for tag-based 0:disable, 1:enable |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.1.4 | Scalares2126pDoubleTag | read-write | current | Double Tag: for tag-based 0:disable, 1:enable |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.1.5 | Scalares2126pUpLinkPort | read-write | current | Up link Port: for Metro mode 0:Port 25, 1:Port 26, 2:Port 25 & 26 |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.2 | Nodees2126pTagBasedVlanGroup | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.17.2.1 | Scalares2126pTagBasedVlanNumbers | read-only | current | Total numbers for tag-based vlan. |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.2.2 | Scalares2126pTagBasedCreateStatus | read-write | current | Creat a temp vlan in tag-based vlan table. 0 : none, 1~4094 : creat with this vid. |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.2.3 | Tablees2126pTagBasedVlanTable | not-accessible | current | |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.2.3.1 | Rowes2126pTagBasedVlanEntry | not-accessible | current | Entry(s) for tag-based vlan table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.2.3.1.1 | Columnes2126pTagBasedVlanVid | not-accessible | current | The vid of vlan. |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.2.3.1.2 | Columnes2126pTagBasedVlanName | read-write | current | The name of vlan. |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.2.3.1.3 | Columnes2126pTagBasedVlanMember | read-write | current | The member of vlan. |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.2.3.1.4 | Columnes2126pTagBasedVlanUntag | read-write | current | The untag port of vlan. |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.2.3.1.5 | Columnes2126pTagBasedVlanRowStatus | read-write | current | The row status of vlan. 1 : active, 2 : not-inService, 3 : delete |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.3 | Nodees2126pVlanPvid | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.17.3.1 | Tablees2126pVlanPvidTable | not-accessible | current | |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.3.1.1 | Rowes2126pVlanPvidEntry | not-accessible | current | Entry(s) for Vlan Pvid. |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.3.1.1.1 | Columnes2126pVlanPvidPort | not-accessible | current | The port number of pvid entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.3.1.1.2 | Columnes2126pVlanPvidValue | read-write | current | The pvid value of port. |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.3.1.1.3 | Columnes2126pVlanPvidDefaultPriority | read-write | current | The default priority of port . |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.3.1.1.4 | Columnes2126pVlanPvidDropUntag | read-write | current | The drop untag of port . |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.4 | Nodees2126pPortBasedVlanGroup | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.17.4.1 | Scalares2126pPortBasedVlanNumbers | read-only | current | Total numbers for tag-based vlan. |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.4.2 | Scalares2126pPortBasedCreateStatus | read-write | current | Creat a temp vlan in port-based vlan table. 0 : none, 1 : creat a new port-based vlan. |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.4.3 | Tablees2126pPortBasedVlanTable | not-accessible | current | |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.4.3.1 | Rowes2126pPortBasedVlanEntry | not-accessible | current | Entry(s) for port-based vlan table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.4.3.1.1 | Columnes2126pPortBasedVlanIndex | not-accessible | current | The index of vlan. |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.4.3.1.2 | Columnes2126pPortBasedVlanName | read-write | current | The name of vlan. |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.4.3.1.3 | Columnes2126pPortBasedVlanMember | read-write | current | The member of vlan. |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.4.3.1.4 | Columnes2126pPortBasedVlanRowStatus | read-write | current | The row status of vlan. 1 : active, 2 : not-inService, 3 : delete |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.5 | Nodees2126pManagementVlan | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.17.5.1 | Scalares2126pManagementVlanState | read-write | current | The stat of management vlan. (for tag-base) 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.2356.800.2.2127.1.17.5.2 | Scalares2126pManagementVlanVid | read-write | current | The vid value of management vlan. |
| 1.3.6.1.4.1.2356.800.2.2127.1.18 | Nodees2126pDot1X | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.18.1 | Nodees2126pDot1XStateSetting | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.18.1.1 | Scalares2126pRadiusServer | read-write | current | Set radius server ip |
| 1.3.6.1.4.1.2356.800.2.2127.1.18.1.2 | Scalares2126pDot1XPort | read-write | current | Set 802.1X port number |
| 1.3.6.1.4.1.2356.800.2.2127.1.18.1.3 | Scalares2126pSecretKey | read-write | current | Set 802.1X secret key |
| 1.3.6.1.4.1.2356.800.2.2127.1.18.1.4 | Scalares2126pAccountingService | read-write | current | Set 802.1X accounting service 0 : disable 1 : enable |
| 1.3.6.1.4.1.2356.800.2.2127.1.18.1.5 | Scalares2126pAccountingServer | read-write | current | Set 802.1X accounting server |
| 1.3.6.1.4.1.2356.800.2.2127.1.18.1.6 | Scalares2126pAccountingPort | read-write | current | Set 802.1X accounting port number |
| 1.3.6.1.4.1.2356.800.2.2127.1.18.2 | Nodees2126pDot1XPortSecurityManagement | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.18.2.1 | Tablees2126pDot1XPortSecurityTable | not-accessible | current | This is a list of the 802.1x port security entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.18.2.1.1 | Rowes2126pDot1XPortSecurityEntry | not-accessible | current | Entry(s) for 802.1x port security management table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.18.2.1.1.1 | Columnes2126pDot1XPortSecurityPortIndex | not-accessible | current | The port index of 802.1x port security. |
| 1.3.6.1.4.1.2356.800.2.2127.1.18.2.1.1.2 | Columnes2126pDot1XPortSecurityMode | read-write | current | The mode of 802.1x port security. 0 : Disable, 1 : Normal, 2 : Advanced 802.1X |
| 1.3.6.1.4.1.2356.800.2.2127.1.18.2.1.1.3 | Columnes2126pDot1XPortSecurityPortControl | read-write | current | The port control of 802.1x port security. 0 : ForceUnauthorized, 1 : ForceAuthorized, 2 : Auto |
| 1.3.6.1.4.1.2356.800.2.2127.1.18.2.1.1.4 | Columnes2126pDot1XPortSecurityReAuthMax | read-write | current | The reAuthMax(1~10) of 802.1x port security. |
| 1.3.6.1.4.1.2356.800.2.2127.1.18.2.1.1.5 | Columnes2126pDot1XPortSecurityTxPeriod | read-write | current | The txPeriod(1~65535) of 802.1x port security. |
| 1.3.6.1.4.1.2356.800.2.2127.1.18.2.1.1.6 | Columnes2126pDot1XPortSecurityQuietPeriod | read-write | current | The quiet period(0~65535) of 802.1x port security. |
| 1.3.6.1.4.1.2356.800.2.2127.1.18.2.1.1.7 | Columnes2126pDot1XPortSecurityReAuthEnabled | read-write | current | The reAuthEnabled of 802.1x port security. 0 : off, 1 : on. |
| 1.3.6.1.4.1.2356.800.2.2127.1.18.2.1.1.8 | Columnes2126pDot1XPortSecurityReAuthPeriod | read-write | current | The reAuthPeriod(1~65535) of 802.1x port security. |
| 1.3.6.1.4.1.2356.800.2.2127.1.18.2.1.1.9 | Columnes2126pDot1XPortSecurityMaxRequest | read-write | current | The max.request(1~10) of 802.1x port security. |
| 1.3.6.1.4.1.2356.800.2.2127.1.18.2.1.1.10 | Columnes2126pDot1XPortSecuritySuppTimeout | read-write | current | The suppTimeout(1~65535) of 802.1x port security. |
| 1.3.6.1.4.1.2356.800.2.2127.1.18.2.1.1.11 | Columnes2126pDot1XPortSecurityServerTimeout | read-write | current | The server timeout(1~65535) of 802.1x port security. |
| 1.3.6.1.4.1.2356.800.2.2127.1.18.2.1.1.12 | Columnes2126pDot1XPortSecurityStatus | read-only | current | The status of 802.1x port security. |
| 1.3.6.1.4.1.2356.800.2.2127.1.19 | Nodees2126pTrunkInfo | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.19.1 | Nodees2126pTrunkPort | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.19.1.1 | Tablees2126pTrunkPortTable | not-accessible | current | |
| 1.3.6.1.4.1.2356.800.2.2127.1.19.1.1.1 | Rowes2126pTrunkPortEntry | not-accessible | current | Entry(s) for trunk table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.19.1.1.1.1 | Columnes2126pTrunkPortIndex | not-accessible | current | The port index of trunk table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.19.1.1.1.2 | Columnes2126pTrunkPortMethod | read-write | current | The method of trunk port. 0 : None, 1 : LACP, 2 : Static. |
| 1.3.6.1.4.1.2356.800.2.2127.1.19.1.1.1.3 | Columnes2126pTrunkPortGroup | read-write | current | The group(0~3) of trunk port. Each group just can have one method. Rule1: Maximum 3 groups are allowed. Rule2: The members of each group cannot exceed more tha… |
| 1.3.6.1.4.1.2356.800.2.2127.1.19.1.1.1.4 | Columnes2126pTrunkPortActiveLacp | read-write | current | The active lacp mode of trunk port. 0 : Passive, 1 : Active. |
| 1.3.6.1.4.1.2356.800.2.2127.1.19.1.1.1.5 | Columnes2126pTrunkPortAggtr | read-only | current | The Aggtr of trunk port. |
| 1.3.6.1.4.1.2356.800.2.2127.1.19.1.1.1.6 | Columnes2126pTrunkPortStatus | read-only | current | The status of trunk port. 0 : None, 1 : Ready. |
| 1.3.6.1.4.1.2356.800.2.2127.1.19.1.1.1.7 | Columnes2126pTrunkPortCurrentMode | read-write | current | The current mode of trunk port entry. 0 : Active mode, 1 : Edit mode, 2 : Do edit. |
| 1.3.6.1.4.1.2356.800.2.2127.1.19.2 | Nodees2126pAggregatorView | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.19.2.1 | Tablees2126pAggregatorViewTable | not-accessible | current | |
| 1.3.6.1.4.1.2356.800.2.2127.1.19.2.1.1 | Rowes2126pAggregatorViewEntry | not-accessible | current | Entry(s) for aggregator view table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.19.2.1.1.1 | Columnes2126pAggregatorViewIndex | not-accessible | current | The port index of aggregator view table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.19.2.1.1.2 | Columnes2126pAggregatorViewMethod | read-only | current | The method of aggregator view table. 0 : None, 1 : LACP, 2 : Static. |
| 1.3.6.1.4.1.2356.800.2.2127.1.19.2.1.1.3 | Columnes2126pAggregatorViewMemberPorts | read-only | current | The member ports of aggregator view table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.19.2.1.1.4 | Columnes2126pAggregatorViewReadyPorts | read-only | current | The ready ports of aggregator view table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.19.3 | Nodees2126pLacpSystemConfiguration | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.19.3.1 | Scalares2126pLacpSystemPriority | read-write | current | The priority of LACP system. |
| 1.3.6.1.4.1.2356.800.2.2127.1.19.3.2 | Scalares2126pLacpSystemHashMethod | read-write | current | The hash method of LACP system. 0 : DA and SA 1 : SA 2 : DA |
| 1.3.6.1.4.1.2356.800.2.2127.1.20 | Nodees2126pTrapEntry | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.20.1 | Notificationes2126pModuleInserted | current | Send the trap when a module is inserted to the system. The OID value means the port number. | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.2 | Notificationes2126pModuleRemoved | current | Send the trap when a module is removed from the system. The OID value means the port number. | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.3 | Notificationes2126pDualMediaSwapped | current | Send the trap when the dual media port changed. The OID value means the port number. | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.4 | Notificationes2126pPoEFailure | current | Send the trap while detecting the malfunction of PoE chips. | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.5 | Notificationes2126pLoopDetected | current | Send the trap when loop condition has been detected. The OID value means the port number. | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.6 | Notificationes2126pLoginProtected | current | Send the trap when login protect has been detected. | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.100 | Notificationes2126pStpStateDisabled | current | Send the trap when the operational state of STP is from enabled to disabled. | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.101 | Notificationes2126pStpStateEnabled | current | Send the trap when the operational state of STP is from disabled to enabled. | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.102 | Notificationes2126pStpTopologyChanged | current | Send the trap when RSTP determines a port should enter the FORWARDING state (a topology change occurs). The OID value is the ifIndex of the port that produces … | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.110 | Notificationes2126pRmonRisingAlarm | current | Send the trap when an RMON rising alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that exceeds its own Risin… | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.111 | Notificationes2126pRmonFallingAlarm | current | Send the trap when an RMON falling alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that is smaller than its … | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.120 | Notificationes2126pLacpStateDisabled | current | Send the trap when the operational state of LACP is from enabled to disabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.121 | Notificationes2126pLacpStateEnabled | current | Send the trap when the operational state of LACP is from disabled to enabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.123 | Notificationes2126pLacpPortAdded | current | Send the trap when the state of port is in 'trunk ready'. | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.124 | Notificationes2126pLacpPortTrunkFailure | current | Send the trap when one port is not able to be aggregated due to duplex-mode of the port. | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.140 | Notificationes2126pGvrpStateDisabled | current | Send the trap when the operational state of GVRP is from enabled to disabled. | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.141 | Notificationes2126pGvrpStateEnabled | current | Send the trap when the operational state of LACP is from disabled to enabled. | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.151 | Notificationes2126pVlanPortBaseEnabled | current | Send the trap when the operational state of vlan is changed to port-based vlan. | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.152 | Notificationes2126pVlanTagBaseEnabled | current | Send the trap when the operational state of vlan is changed to tag-based vlan. | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.153 | Notificationes2126pVlanMetroBaseEnabled | current | Send this trap when the operational state of vlan is changed to metro-based vlan. | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.200 | Notificationes2126pUserLogin | current | Send the trap when one user logins the system. | |
| 1.3.6.1.4.1.2356.800.2.2127.1.20.201 | Notificationes2126pUserLogout | current | Send the trap when one user logouts the system. | |
| 1.3.6.1.4.1.2356.800.2.2127.1.21 | Nodees2126pTrapVariable | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.21.1 | Scalarusername | read-only | current | System account name. |
| 1.3.6.1.4.1.2356.800.2.2127.1.21.2 | ScalargroupId | read-only | current | The Trunk group ID of LACP. |
| 1.3.6.1.4.1.2356.800.2.2127.1.21.3 | Scalaractorkey | read-only | current | The actor key information for LACP. |
| 1.3.6.1.4.1.2356.800.2.2127.1.21.4 | Scalarpartnerkey | read-only | current | The partner key information for LACP. |
| 1.3.6.1.4.1.2356.800.2.2127.1.21.5 | Scalaruplink | read-only | current | Uplink port(s) in the metro-mode vlan. |
| 1.3.6.1.4.1.2356.800.2.2127.1.21.6 | ScalarloginProtectInfo | read-only | current | Loging protect information. |
| 1.3.6.1.4.1.2356.800.2.2127.1.22 | Nodees2126pPoE | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.22.1 | Nodees2126pPoEStatus | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.22.1.1 | Scalares2126pPoEStatusVmain | read-only | current | Current PoE Voltage status |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.1.2 | Scalares2126pPoEStatusImain | read-only | current | Current PoE Current status |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.1.3 | Scalares2126pPoEStatusPconsume | read-only | current | Current PoE consuming power status |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.1.4 | Scalares2126pPoEStatusPowerLimit | read-only | current | Current PoE power limit status |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.1.5 | Scalares2126pPoEStatusTemperature | read-only | current | Current PoE temperature status |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.1.6 | Tablees2126pPoEStatusTable | not-accessible | current | A list of PoE Status entry. The number of entries are given by Ports. |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.1.6.1 | Rowes2126pPoEStatusEntry | not-accessible | current | Entry(s) for PoE Status. |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.1.6.1.1 | Columnes2126pPoEStatusPortNum | not-accessible | current | The index(Port number) of the PoE status entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.1.6.1.2 | Columnes2126pPoEStatusPortOn | read-only | current | PD on this port is on. |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.1.6.1.3 | Columnes2126pPoEStatusACPortOff | read-only | current | Possitive value means PSE has been supplied power and is no supplying now, while zero means PSE has never supplied power or is supplying now. |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.1.6.1.4 | Columnes2126pPoEStatusDCPortOff | read-only | current | PD on this port is DC off. |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.1.6.1.5 | Columnes2126pPoEStatusOverloadPortOff | read-only | current | Possitive value means PSE status overloaded now. Zero means PSE is not overloaded. |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.1.6.1.6 | Columnes2126pPoEStatusShortCircuitPortOff | read-only | current | PD on this port is short circuit off. |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.1.6.1.7 | Columnes2126pPoEStatusOverTemperature | read-only | current | PD on this port is over temperature. |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.1.6.1.8 | Columnes2126pPoEStatusPowerManagePortOff | read-only | current | PD on this port is powered off by management. |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.2 | Tablees2126pPoEConfTable | not-accessible | current | A list of PoE Configuration entry. The number of entries are given by Ports. |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.2.1 | Rowes2126pPoEConfEntry | not-accessible | current | Entry(s) for PoE Configuration. |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.2.1.1 | Columnes2126pPoEConfPortNum | not-accessible | current | The index(Port number) of the PoE Configuration entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.2.1.2 | Columnes2126pPoEConfStatus | read-only | current | 0:Normal ; 1:Active |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.2.1.3 | Columnes2126pPoEConfState | read-write | current | 0:Disable ; 1:Enable |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.2.1.4 | Columnes2126pPoEConfPriority | read-write | current | 0:Low ; 1:Normal ; 2:High |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.2.1.5 | Columnes2126pPoEConfPower | read-only | current | The power provides for the PD. |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.2.1.6 | Columnes2126pPoEConfCurrent | read-only | current | The current provides for the PD. |
| 1.3.6.1.4.1.2356.800.2.2127.1.22.2.1.7 | Columnes2126pPoEConfClass | read-only | current | The class of the PD. |
| 1.3.6.1.4.1.2356.800.2.2127.1.23 | Nodees2126pLoginProtect | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.23.1 | Scalares2126pLockMinutes | read-write | current | Set the login lock time. Available from 0 to 10 (minutes) Set 0 as disabled. |
| 1.3.6.1.4.1.2356.800.2.2127.1.23.2 | Scalares2126pLoginErrors | read-write | current | Set login error count. Available from 0 to 10 (times) Set 0 as disabled. |
| 1.3.6.1.4.1.2356.800.2.2127.1.24 | Nodees2126pIgmpSnooping | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.24.1 | Scalares2126pIgmpSnoopingMode | read-write | current | Set Igmp Snooping Mode. 0 : disable, 1 : active, 2 : passive |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.2 | Nodees2126pIgmpVlanGroupAllow | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.24.2.1 | Scalares2126pIgmpVlanGroupAllowState | read-write | current | Set Igmp Vlan Group Allow State. 0 : disable, 1 : enable, |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.2.2 | Scalares2126pIgmpVlanGroupAllowNumber | read-only | current | This is number of Igmp Vlan Group Allow table entry |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.2.3 | Scalares2126pIgmpVlanGroupAllowEntryCreate | read-write | current | Creat a Igmp Vlan Group Allow entry. Set 1: add a new entry, Get: the number means index. |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.2.4 | Tablees2126pIgmpVlanGroupAlloTable | not-accessible | current | This is a list of Igmp Vlan Group Allow table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.2.4.1 | RowES2126PIgmpVlanGroupAllowEntry | not-accessible | current | Entry(s) for Igmp Vlan Group Allow Table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.2.4.1.1 | Columnes2126pIgmpVlanGroupAllowIndex | not-accessible | current | The index of Igmp Vlan Group Allow Table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.2.4.1.2 | Columnes2126pIgmpVlanGroupAllowIpRange | read-write | current | The start address of Igmp Vlan Group Allow table entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.2.4.1.3 | Columnes2126pIgmpVlanGroupAllowVid | read-write | current | The vlan id of Igmp Vlan Group Allow table entry. 0: any VID. |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.2.4.1.4 | Columnes2126pIgmpVlanGroupAllowPort | read-write | current | The port of Igmp Vlan Group Allow table entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.2.4.1.5 | Columnes2126pIgmpVlanGroupAllowEntryAction | read-write | current | The action of Igmp Vlan Group Allow table entry. 1:action 2:non-action 3:delete |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.3 | Nodees2126pIgmpStaticIpMulticast | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.24.3.1 | Scalares2126pIgmpStaticIpMulticastNumber | read-only | current | This is number of Igmp Static IP Multicast table entry |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.3.2 | Scalares2126pIgmpStaticIpMulticastEntryCreate | read-write | current | Creat a Igmp Static IP Multicast entry. Set 1: add a new entry, Get: the number means index. |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.3.3 | Tablees2126pIgmpStaticIpMulticastTable | not-accessible | current | This is a list of Igmp Static IP Multicast table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.3.3.1 | RowES2126PIgmpStaticIpMulticastEntry | not-accessible | current | Entry(s) for Igmp Static IP Multicast Table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.3.3.1.1 | Columnes2126pIgmpStaticIpMulticastIndex | not-accessible | current | The index of Igmp Static IP Multicast Table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.3.3.1.2 | Columnes2126pIgmpStaticIpMulticastIp | read-write | current | The IP address of Igmp Static IP Multicast table entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.3.3.1.3 | Columnes2126pIgmpStaticIpMulticastVid | read-write | current | The vlan id of Igmp Static IP Multicast table entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.3.3.1.4 | Columnes2126pIgmpStaticIpMulticastPort | read-write | current | The port of Igmp Static IP Multicast table entry. |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.3.3.1.5 | Columnes2126pIgmpStaticIpMulticastEntryAction | read-write | current | The action of Igmp Static IP Multicast table entry. 1:action 2:non-action 3:delete |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.4 | Nodees2126pRadiusIgmpSetting | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.24.4.1 | Scalares2126pRadiusIgmpServer1 | read-write | current | Radius Igmp Server1 |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.4.2 | Scalares2126pRadiusIgmpPortNumber1 | read-write | current | Set Radius Igmp port number1. port number: from 1 to 65535 |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.4.3 | Scalares2126pRadiusIgmpServer2 | read-write | current | Radius Igmp Server2 |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.4.4 | Scalares2126pRadiusIgmpPortNumber2 | read-write | current | Set Radius Igmp port number2. port number: from 1 to 65535 |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.4.5 | Scalares2126pRadiusIgmpResponseTimeout | read-write | current | Set radius-igmp timeout. time: 2 ~ 60 seconds |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.4.6 | Scalares2126pRadiusIgmpNumberOfRetry | read-write | current | Set radius-igmp number of retry. value: 0 ~ 10 times |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.4.7 | Scalares2126pRadiusIgmpSecretKey | read-write | current | Set Radius Igmp secret key. The length of secret-key is from 1 to 31 |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.4.8 | Scalares2126pRadiusIgmpPortMember | read-write | current | The Port Member of Radius Igmp. |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.5 | Nodees2126pMulticastStatus | |||
| 1.3.6.1.4.1.2356.800.2.2127.1.24.5.1 | Tablees2126pMulticastStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.5.1.1 | Rowes2126pMulticastStatusEntry | not-accessible | current | Entry(s) for Multicast Status table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.5.1.1.1 | Columnes2126pMulticastStatusIndex | not-accessible | current | The index of multicast status table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.5.1.1.2 | Columnes2126pMulticastStatusVid | read-only | current | The Vid of multicast status table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.5.1.1.3 | Columnes2126pMulticastStatusMulticastGroup | read-only | current | The Multicast Group of multicast status table. |
| 1.3.6.1.4.1.2356.800.2.2127.1.24.5.1.1.4 | Columnes2126pMulticastStatusPortMember | read-only | current | The Port Member of multicast status table. |