LANCOM-ES-2126PLUS-MIB

434 objects

The MIB module is for LANCOM Systems

Imported Objects

BRIDGE-MIB	MacAddress
RFC1213-MIB	ifIndex
SNMPv2-CONF	MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI	Counter32 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TC	DisplayString

OID	Name	Access	Status	Description
1.3.6.1.4.1.2356	IdentitylancomSystems			The MIB module is for LANCOM Systems
1.3.6.1.4.1.2356.800	NodeswitchingSystems
1.3.6.1.4.1.2356.800.2	NodefastEthernetSwitches
1.3.6.1.4.1.2356.800.2.2128	NodelancomES2126PLUS
1.3.6.1.4.1.2356.800.2.2128.1	Nodees2126plusProduces
1.3.6.1.4.1.2356.800.2.2128.1.1	Nodees2126plusSystem
1.3.6.1.4.1.2356.800.2.2128.1.1.1	Nodees2126plusCommonSys
1.3.6.1.4.1.2356.800.2.2128.1.1.1.1	Scalares2126plusReboot	read-write	current	Reboot the system. Get this OID always return zero. 0 - do nothing 1 - Reboot without saving start 2 - Reboot with saving start
1.3.6.1.4.1.2356.800.2.2128.1.1.1.2	Scalares2126plusBiosVsersion	read-only	current	Get the BIOS version of the system.
1.3.6.1.4.1.2356.800.2.2128.1.1.1.3	Scalares2126plusFirmwareVersion	read-only	current	Get the firmware version of the system.
1.3.6.1.4.1.2356.800.2.2128.1.1.1.4	Scalares2126plusHardwareVersion	read-only	current	Get the hardware version of the system.
1.3.6.1.4.1.2356.800.2.2128.1.1.1.5	Scalares2126plusMechanicalVersion	read-only	current	Get the mechanical version of the system.
1.3.6.1.4.1.2356.800.2.2128.1.1.1.6	Scalares2126plusSerialNumber	read-only	current	Get the Serial number of the system.
1.3.6.1.4.1.2356.800.2.2128.1.1.1.7	Scalares2126plusHostMacAddress	read-only	current	Get the MAC address of the system.
1.3.6.1.4.1.2356.800.2.2128.1.1.1.8	Scalares2126plusDevicePort	read-only	current	Get the quantity of ports that this system owns now.
1.3.6.1.4.1.2356.800.2.2128.1.1.1.9	Scalares2126plusRamSize	read-only	current	Get the RAM size of the system.
1.3.6.1.4.1.2356.800.2.2128.1.1.1.10	Scalares2126plusFlashSize	read-only	current	Get the flash size of the system.
1.3.6.1.4.1.2356.800.2.2128.1.1.1.11	Scalares2126plusSystemDescription	read-only	current	Get the system description.
1.3.6.1.4.1.2356.800.2.2128.1.1.1.12	Scalares2126plusDeviceName	read-write	current	Get/Set the device Name.
1.3.6.1.4.1.2356.800.2.2128.1.1.2	Nodees2126plusIP
1.3.6.1.4.1.2356.800.2.2128.1.1.2.1	Scalares2126plusDhcpSetting	read-write	current	Get/Set DHCP status of the system. 0 - DHCP disable 1 - DHCP enable
1.3.6.1.4.1.2356.800.2.2128.1.1.2.2	Scalares2126plusIPAddress	read-write	current	Get/Set the IP address of the system. You can't set this OID if DHCP status is enabled.
1.3.6.1.4.1.2356.800.2.2128.1.1.2.3	Scalares2126plusNetMask	read-write	current	Get/Set the subnet mask of the system. You can't set this OID if DHCP status is enabled.
1.3.6.1.4.1.2356.800.2.2128.1.1.2.4	Scalares2126plusDefaultGateway	read-write	current	Get/Set the default gateway of the system. You can't set this OID if DHCP status is enabled.
1.3.6.1.4.1.2356.800.2.2128.1.1.2.5	Scalares2126plusDnsSetting	read-write	current	Get/Set the source of DNS server. You can't set this OID if DHCP status is disabled. 0 - manual, the DNS server is from manual setting 1 - Auto, the DNS server…
1.3.6.1.4.1.2356.800.2.2128.1.1.2.6	Scalares2126plusDnsServer	read-write	current	Get/Set the DNS server of the system.
1.3.6.1.4.1.2356.800.2.2128.1.1.3	Nodees2126plusTime
1.3.6.1.4.1.2356.800.2.2128.1.1.3.1	Scalares2126plusSystemCurrentTime	read-only	current	Get the current time of the system.
1.3.6.1.4.1.2356.800.2.2128.1.1.3.2	Scalares2126plusManualTimeSetting	read-write	current	Get/Set the system time of the device. The input format is 'Year/Month/Day/Hour/Minute/Second'. Ex: 2004/1/1/12/34/25 means 2004/1/1 - 12:24:25. Value range: Y…
1.3.6.1.4.1.2356.800.2.2128.1.1.3.3	Scalares2126plusNTPServer	read-write	current	Get/Set the NTP Time Server. You can use the IP address or domain name.
1.3.6.1.4.1.2356.800.2.2128.1.1.3.4	Scalares2126plusNTPTimeZone	read-write	current	Get/Set the NTP Time Zone. Value range is between -12 and 13 -12 - GMT -12:00, -11 - GMT -11:00, -10 - GMT -10:00, -9 - GMT -09:00, -8 - GMT -08:00, -7 - GMT -…
1.3.6.1.4.1.2356.800.2.2128.1.1.3.5	Scalares2126plusNTPTimeSync	read-write	current	Sync time from NTP Server. Get this OID always return zero. Set the Time Server and Time Zone before doing time sync. Notice that time server must be correct! …
1.3.6.1.4.1.2356.800.2.2128.1.1.3.6	Scalares2126plusDaylightSavingTime	read-write	current	Get/Set the daylight saving time. Value range is between -5 and 5. Unit: hour.
1.3.6.1.4.1.2356.800.2.2128.1.1.3.7	Scalares2126plusDaylightStartTime	read-write	current	Get/Set the Start time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. Example: month/day/hour 10/01…
1.3.6.1.4.1.2356.800.2.2128.1.1.3.8	Scalares2126plusDaylightEndTime	read-write	current	Get/Set the End time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. Example: month/day/hour 04/01/0…
1.3.6.1.4.1.2356.800.2.2128.1.1.4	Nodees2126plusAccount
1.3.6.1.4.1.2356.800.2.2128.1.1.4.1	Scalares2126plusAccountNumber	read-only	current	Get the current account number(s) of the system.
1.3.6.1.4.1.2356.800.2.2128.1.1.4.2	Tablees2126plusAccountTable	not-accessible	current	This is a list of es2126plusAccountEntry. The numbers of entries are given by the value of es2126plusAccountNumber.
1.3.6.1.4.1.2356.800.2.2128.1.1.4.2.1	Rowes2126plusAccountEntry	not-accessible	current	This is the Entry(s) for account information.
1.3.6.1.4.1.2356.800.2.2128.1.1.4.2.1.1	Columnes2126plusAccountIndex	read-only	current	This is the index of the account entry.
1.3.6.1.4.1.2356.800.2.2128.1.1.4.2.1.2	Columnes2126plusAccountAuthorization	read-only	current	This is the authorization of the account entry.
1.3.6.1.4.1.2356.800.2.2128.1.1.4.2.1.3	Columnes2126plusAccountName	read-write	current	This is the username of the account entry.
1.3.6.1.4.1.2356.800.2.2128.1.1.4.2.1.4	Columnes2126plusAccountPassword	read-write	current	This is the password of the account entry. The return value is always '********'.
1.3.6.1.4.1.2356.800.2.2128.1.1.4.3	Scalares2126plusAccountAddName	read-write	current	This is the account name for adding operation.
1.3.6.1.4.1.2356.800.2.2128.1.1.4.4	Scalares2126plusAccountAddPassword	read-write	current	This is the account password for adding operation. The return value is always '********'.
1.3.6.1.4.1.2356.800.2.2128.1.1.4.5	Scalares2126plusDoAccountAdd	read-write	current	Add account name. OID es2126plusAccountAddName and es2126plusAccountAddPassword must be filled first. Get this OID always return zero. 1 - Add account. 0 - do …
1.3.6.1.4.1.2356.800.2.2128.1.1.4.6	Scalares2126plusAccountDel	read-write	current	Delete account. The value is valid es2126plusAccountIndex(Can't delete administrator).
1.3.6.1.4.1.2356.800.2.2128.1.2	Nodees2126plusSnmp
1.3.6.1.4.1.2356.800.2.2128.1.2.1	Scalares2126plusGetCommunity	read-write	current	Get/Set the get-community of the SNMP.
1.3.6.1.4.1.2356.800.2.2128.1.2.2	Scalares2126plusSetCommunity	read-write	current	Get/Set the set-community of the SNMP.
1.3.6.1.4.1.2356.800.2.2128.1.2.3	Scalares2126plusTrapHostNumber	read-only	current	Get the number of trap hosts.
1.3.6.1.4.1.2356.800.2.2128.1.2.4	Tablees2126plusTrapHostTable	not-accessible	current	This is a list of trap host entry. The numbers of entries are given by the value of es2126plusTrapHostNumber.
1.3.6.1.4.1.2356.800.2.2128.1.2.4.1	Rowes2126plusTrapHostEntry	not-accessible	current	This is the Entry Information for trap host.
1.3.6.1.4.1.2356.800.2.2128.1.2.4.1.1	Columnes2126plusTrapHostIndex	read-only	current	The index of the trap host entry.
1.3.6.1.4.1.2356.800.2.2128.1.2.4.1.2	Columnes2126plusTrapHostIP	read-write	current	This is the IP of the trap host.
1.3.6.1.4.1.2356.800.2.2128.1.2.4.1.3	Columnes2126plusTrapHostPort	read-write	current	This is the receiving-port number of the trap host.
1.3.6.1.4.1.2356.800.2.2128.1.2.4.1.4	Columnes2126plusTrapHostCommunity	read-write	current	The community name for the trap PDU.
1.3.6.1.4.1.2356.800.2.2128.1.2.5	Scalares2126plusRegisterMonitor	read-write	current	Register-Monitor
1.3.6.1.4.1.2356.800.2.2128.1.2.6	Scalares2126plusDeleteMonitor	read-write	current	Delete-Monitor
1.3.6.1.4.1.2356.800.2.2128.1.2.7	Tablees2126plusMonitorTable	not-accessible	current	Monitor-Table
1.3.6.1.4.1.2356.800.2.2128.1.2.7.1	Rowes2126plusMonitorEntry	not-accessible	current	entry in table
1.3.6.1.4.1.2356.800.2.2128.1.2.7.1.1	Columnes2126plusMonitorTableIp	read-only	current	IP-Address
1.3.6.1.4.1.2356.800.2.2128.1.2.7.1.2	Columnes2126plusMonitorTableMac	read-only	current	MAC-Address
1.3.6.1.4.1.2356.800.2.2128.1.2.8	Scalares2126plusTrapBootDelayTime	read-write	current	Get/Set trap boot delay time in second. Default: 0
1.3.6.1.4.1.2356.800.2.2128.1.3	Nodees2126plusAlarm
1.3.6.1.4.1.2356.800.2.2128.1.3.1	Nodees2126plusEvent
1.3.6.1.4.1.2356.800.2.2128.1.3.1.1	Scalares2126plusEventNumber	read-only	current	Get the total number of alarm events.
1.3.6.1.4.1.2356.800.2.2128.1.3.1.2	Tablees2126plusEventTable	not-accessible	current	This is a list of alarm event entry. The numbers of entries are given by the value of es2126plusEventNumber.
1.3.6.1.4.1.2356.800.2.2128.1.3.1.2.1	Rowes2126plusEventEntry	not-accessible	current	This is the entry information for alarm event.
1.3.6.1.4.1.2356.800.2.2128.1.3.1.2.1.1	Columnes2126plusEventIndex	read-only	current	This is the index of the alarm event entry.
1.3.6.1.4.1.2356.800.2.2128.1.3.1.2.1.2	Columnes2126plusEventName	read-only	current	This is the alarm event name.
1.3.6.1.4.1.2356.800.2.2128.1.3.1.2.1.3	Columnes2126plusEventSendEmail	read-write	current	Send email when alarm event is triggered.
1.3.6.1.4.1.2356.800.2.2128.1.3.1.2.1.4	Columnes2126plusEventSendTrap	read-write	current	Send trap when alarm event is triggered.
1.3.6.1.4.1.2356.800.2.2128.1.3.2	Nodees2126plusEmail
1.3.6.1.4.1.2356.800.2.2128.1.3.2.1	Scalares2126plusEmailServer	read-write	current	This is the SMTP server for alarm event.
1.3.6.1.4.1.2356.800.2.2128.1.3.2.2	Scalares2126plusEmailUsername	read-write	current	This is the Username of SMTP server.
1.3.6.1.4.1.2356.800.2.2128.1.3.2.3	Scalares2126plusEmailPassword	read-write	current	This is the User Password of SMTP server.
1.3.6.1.4.1.2356.800.2.2128.1.3.2.4	Scalares2126plusEmailSender	read-write	current	This is the Sender of SMTP server.
1.3.6.1.4.1.2356.800.2.2128.1.3.2.5	Scalares2126plusEmailReturnPath	read-write	current	This is the return path of mail.
1.3.6.1.4.1.2356.800.2.2128.1.3.2.6	Scalares2126plusEmailUserNumber	read-only	current	The number of the email users that you want to send the alarm notification.
1.3.6.1.4.1.2356.800.2.2128.1.3.2.7	Tablees2126plusEmailUserTable	not-accessible	current	This is a list of email user entry. The numbers of entries are given by the value of es2126plusEmailUserNumber.
1.3.6.1.4.1.2356.800.2.2128.1.3.2.7.1	Rowes2126plusEmailUserEntry	not-accessible	current	This is the Entry information for email user entry.
1.3.6.1.4.1.2356.800.2.2128.1.3.2.7.1.1	Columnes2126plusEmailUserIndex	read-only	current	This is the index of the email user entry.
1.3.6.1.4.1.2356.800.2.2128.1.3.2.7.1.2	Columnes2126plusEmailUserAddress	read-write	current	This is the email address of the email user entry.
1.3.6.1.4.1.2356.800.2.2128.1.4	Nodees2126plusTftp
1.3.6.1.4.1.2356.800.2.2128.1.4.1	Scalares2126plusTftpRemoteServer	read-write	current	Get/Set the remote tftp server.
1.3.6.1.4.1.2356.800.2.2128.1.4.2	Scalares2126plusTftpInternalServerState	read-write	current	Get/Set internal tftp server state. 0 : Disable 1 : Enable
1.3.6.1.4.1.2356.800.2.2128.1.5	Nodees2126plusConfiguration
1.3.6.1.4.1.2356.800.2.2128.1.5.1	Nodees2126plusSaveRestore
1.3.6.1.4.1.2356.800.2.2128.1.5.1.1	Scalares2126plusSaveStart	read-write	current	Save current configuration into flash memory (Save as Start Configuration). Get this OID always return zero. 1 - Save. 0 - do nothing.
1.3.6.1.4.1.2356.800.2.2128.1.5.1.2	Scalares2126plusSaveUser	read-write	current	Save current configuration into flash memory (Save as User Configuration). Get this OID always return zero. 1 - Save. 0 - do nothing.
1.3.6.1.4.1.2356.800.2.2128.1.5.1.3	Scalares2126plusRestoreDefault	read-write	current	Restore factory default configuration. Get this OID always return zero. 2 - Restore default included default ip address. 1 - Restore default without changing c…
1.3.6.1.4.1.2356.800.2.2128.1.5.1.4	Scalares2126plusRestoreUser	read-write	current	Restore user configuration. Get this OID always return zero. 1 - Restore. 0 - do nothing.
1.3.6.1.4.1.2356.800.2.2128.1.5.2	Nodees2126plusConfigFile
1.3.6.1.4.1.2356.800.2.2128.1.5.2.1	Scalares2126plusExportConfigName	read-write	current	Get/Set the export file path and name.
1.3.6.1.4.1.2356.800.2.2128.1.5.2.2	Scalares2126plusDoExportConfig	read-write	current	Do export-config. Get this OID always return zero. 1 - Export start section. 2 - Export user-conf section.
1.3.6.1.4.1.2356.800.2.2128.1.5.2.3	Scalares2126plusImportConfigName	read-write	current	Get/Set the import file path and name.
1.3.6.1.4.1.2356.800.2.2128.1.5.2.4	Scalares2126plusDoImportConfig	read-write	current	Do import-config. Get this OID always return zero. 1 - Import start section. 2 - Import user-conf section.
1.3.6.1.4.1.2356.800.2.2128.1.6	Nodees2126plusDiagnostic
1.3.6.1.4.1.2356.800.2.2128.1.6.1	Scalares2126plusInternalLoopbackTest	read-only	current	Internal loop back test.
1.3.6.1.4.1.2356.800.2.2128.1.6.2	Scalares2126plusExternalLoopbackTest	read-only	current	External loop back test.
1.3.6.1.4.1.2356.800.2.2128.1.6.3	Scalares2126plusPingTest	read-write	current	Set the host address that you want to ping and the system will return the test result.
1.3.6.1.4.1.2356.800.2.2128.1.6.4	Nodees2126plusWatchdog
1.3.6.1.4.1.2356.800.2.2128.1.6.4.1	Scalares2126plusWatchdogState	read-write	current	Set the watchdog state. 1 - Enable. 0 - Disable.
1.3.6.1.4.1.2356.800.2.2128.1.6.4.2	Scalares2126plusWatchdogTimeGap	read-write	current	Set the watchdog time gap, from 1 to 100.
1.3.6.1.4.1.2356.800.2.2128.1.6.4.3	Scalares2126plusWatchdogHost	read-write	current	Set the watchdog host
1.3.6.1.4.1.2356.800.2.2128.1.6.4.4	Scalares2126plusWatchdogResetMgtInf	read-write	current	Set the state of resetting the management cpu interface. 1 - Enable. 0 - Disable.
1.3.6.1.4.1.2356.800.2.2128.1.6.4.5	Scalares2126plusWatchdogResetMgtInfCount	read-write	current	Set the count of resetting the management cpu interface.
1.3.6.1.4.1.2356.800.2.2128.1.6.4.6	Scalares2126plusWatchdogResetSystem	read-write	current	Set the state of rebooting the system. 1 - Enable. 0 - Disable.
1.3.6.1.4.1.2356.800.2.2128.1.6.4.7	Scalares2126plusWatchdogResetSystemCount	read-write	current	Set the count of rebooting the system
1.3.6.1.4.1.2356.800.2.2128.1.7	Nodees2126plusLog
1.3.6.1.4.1.2356.800.2.2128.1.7.1	Scalares2126plusClearLog	read-write	current	Clear system log. Get this OID always return zero. 1 - Clear log. 0 - do nothing.
1.3.6.1.4.1.2356.800.2.2128.1.7.2	Scalares2126plusUploadLog	read-write	current	Upload current system log. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return zero.…
1.3.6.1.4.1.2356.800.2.2128.1.7.3	Scalares2126plusAutoUploadLogState	read-write	current	Enable auto-upload log function. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return…
1.3.6.1.4.1.2356.800.2.2128.1.7.4	Scalares2126plusLogNumber	read-only	current	Get the number of current system log.
1.3.6.1.4.1.2356.800.2.2128.1.7.5	Tablees2126plusLogTable	not-accessible	current	This is a list of log entry. The numbers of entries are given by the value of es2126plusLogNumber.
1.3.6.1.4.1.2356.800.2.2128.1.7.5.1	Rowes2126plusLogEntry	not-accessible	current	This is the Entry information for system log.
1.3.6.1.4.1.2356.800.2.2128.1.7.5.1.1	Columnes2126plusLogIndex	read-only	current	This is the index of the log entry.
1.3.6.1.4.1.2356.800.2.2128.1.7.5.1.2	Columnes2126plusLogEvent	read-only	current	This is the detail information of the log entry.
1.3.6.1.4.1.2356.800.2.2128.1.8	Nodees2126plusFirmware
1.3.6.1.4.1.2356.800.2.2128.1.8.1	Scalares2126plusFirmwareFileName	read-write	current	Get/Set the path and filename for firmware upgrading.
1.3.6.1.4.1.2356.800.2.2128.1.8.2	Scalares2126plusDoFirmwareUpgrade	read-write	current	Do firmware upgrade. Get this OID always return zero. 1 - Do firmware upgrade. 0 - do nothing.
1.3.6.1.4.1.2356.800.2.2128.1.9	Nodees2126plusPort
1.3.6.1.4.1.2356.800.2.2128.1.9.1	Nodees2126plusPortStatus
1.3.6.1.4.1.2356.800.2.2128.1.9.1.1	Scalares2126plusPortStatusNumber	read-only	current	Get the number of port.
1.3.6.1.4.1.2356.800.2.2128.1.9.1.2	Tablees2126plusPortStatusTable	not-accessible	current	This is a list of port status entry. The numbers of entries are given by the value of es2126plusPortStatusNumber.
1.3.6.1.4.1.2356.800.2.2128.1.9.1.2.1	Rowes2126plusPortStatusEntry	not-accessible	current	This is the entry(s) for port status information.
1.3.6.1.4.1.2356.800.2.2128.1.9.1.2.1.1	Columnes2126plusPortStatusIndex	read-only	current	This is the index of the port status entry.
1.3.6.1.4.1.2356.800.2.2128.1.9.1.2.1.2	Columnes2126plusPortStatusMedia	read-only	current	The port media type of the port status entry.
1.3.6.1.4.1.2356.800.2.2128.1.9.1.2.1.3	Columnes2126plusPortStatusLink	read-only	current	This is the port link of the port status entry.
1.3.6.1.4.1.2356.800.2.2128.1.9.1.2.1.4	Columnes2126plusPortStatusPortState	read-only	current	This is the port state of the port status entry.
1.3.6.1.4.1.2356.800.2.2128.1.9.1.2.1.5	Columnes2126plusPortStatusAutoNego	read-only	current	This is the auto negotiation of the port status entry.
1.3.6.1.4.1.2356.800.2.2128.1.9.1.2.1.6	Columnes2126plusPortStatusSpdDpx	read-only	current	This is the speed/duplex of the port status entry.
1.3.6.1.4.1.2356.800.2.2128.1.9.1.2.1.7	Columnes2126plusPortStatusRxPause	read-only	current	The Rx Pause of the port status entry.
1.3.6.1.4.1.2356.800.2.2128.1.9.1.2.1.8	Columnes2126plusPortStatusTxPause	read-only	current	The Tx Pause of the port status entry.
1.3.6.1.4.1.2356.800.2.2128.1.9.1.2.1.9	Columnes2126plusPortStatusDescription	read-only	current	This is the description of port.
1.3.6.1.4.1.2356.800.2.2128.1.9.2	Nodees2126plusPortConf
1.3.6.1.4.1.2356.800.2.2128.1.9.2.1	Scalares2126plusPortConfNumber	read-only	current	Get the number of port configuration.
1.3.6.1.4.1.2356.800.2.2128.1.9.2.2	Tablees2126plusPortConfTable	not-accessible	current	This is a list of port configuration entry. The numbers of entries are given by the value of es2126plusPortConfNumber.
1.3.6.1.4.1.2356.800.2.2128.1.9.2.2.1	Rowes2126plusPortConfEntry	not-accessible	current	This is the Entry(s) for port configuration information.
1.3.6.1.4.1.2356.800.2.2128.1.9.2.2.1.1	Columnes2126plusPortConfIndex	read-only	current	This is the index of the port configuration entry.
1.3.6.1.4.1.2356.800.2.2128.1.9.2.2.1.2	Columnes2126plusPortConfPortState	read-write	current	This is the port state of the port configuration entry. 0 - disabled. 1 - enabled.
1.3.6.1.4.1.2356.800.2.2128.1.9.2.2.1.3	Columnes2126plusPortConfSpdDpx	read-write	current	This is the speed/duplex of the port configuration entry. 0 - auto. 1 - 10M/Half. 2 - 10M/Full. 3 - 100M/Half. 4 - 100M/Full. 5 - 1G/Full.
1.3.6.1.4.1.2356.800.2.2128.1.9.2.2.1.4	Columnes2126plusPortConfFlwCtrl	read-write	current	This is the flow control of the port configuration entry. 0 - asymmetric. 1 - symmetric.
1.3.6.1.4.1.2356.800.2.2128.1.9.2.2.1.5	Columnes2126plusPortConfDescription	read-write	current	This is the description of port.
1.3.6.1.4.1.2356.800.2.2128.1.9.3	Nodees2126plusPortBandwidth
1.3.6.1.4.1.2356.800.2.2128.1.9.3.1	Tablees2126plusPortBandwidthTable	not-accessible	current	This is a list of port bandwidth entry.
1.3.6.1.4.1.2356.800.2.2128.1.9.3.1.1	Rowes2126plusPortBandwidthEntry	not-accessible	current	This is the Entry(s) for port bandwidth configuration.
1.3.6.1.4.1.2356.800.2.2128.1.9.3.1.1.1	Columnes2126plusPortBandwidthIndex	read-only	current	This is the index of the port bandwidth entry.
1.3.6.1.4.1.2356.800.2.2128.1.9.3.1.1.2	Columnes2126plusPortBandwidthIngressRate	read-write	current	Get/Set the port bandwidth ingress rate. Fast Ethernet port range: 66~102400(Kb) Gigabit Ethernet port range: 66~1024000(Kb)
1.3.6.1.4.1.2356.800.2.2128.1.9.3.1.1.3	Columnes2126plusPortBandwidthEgressRate	read-write	current	Get/Set the port bandwidth egress rate. Fast Ethernet port range: 66~102400(Kb) Gigabit Ethernet port range: 66~1024000(Kb)
1.3.6.1.4.1.2356.800.2.2128.1.9.3.2	Scalares2126plusPortBandwidthStormType	read-write	current	This is the bandwidth storm type. 0:Disable 1:Broadcast Storm Control 2:Multicast Storm Control 3:Unknown Unicast Storm Control 4:Broadcast, Multicast, and Unk…
1.3.6.1.4.1.2356.800.2.2128.1.9.3.3	Scalares2126plusPortBandwidthStormRate	read-write	current	This is the storm rate.
1.3.6.1.4.1.2356.800.2.2128.1.9.4	Nodees2126plusPortSFPInfo
1.3.6.1.4.1.2356.800.2.2128.1.9.4.1	Scalares2126plusPortSFPInfoNumber	read-only	current	Get the number of sfp info entry.
1.3.6.1.4.1.2356.800.2.2128.1.9.4.2	Tablees2126plusPortSFPInfoTable	not-accessible	current	A list of sfp info entry. The numbers of entries are given by the value of es2126plusPortSFPInfoNumber.
1.3.6.1.4.1.2356.800.2.2128.1.9.4.2.1	Rowes2126plusPortSFPInfoEntry	not-accessible	current	Entry(s) for SFP information.
1.3.6.1.4.1.2356.800.2.2128.1.9.4.2.1.1	Columnes2126plusPortSFPInfoIndex	read-only	current	The index of the sfp info entry.
1.3.6.1.4.1.2356.800.2.2128.1.9.4.2.1.2	Columnes2126plusPortSFPConnectorType	read-only	current	Get connector type of the sfp.
1.3.6.1.4.1.2356.800.2.2128.1.9.4.2.1.3	Columnes2126plusPortSFPFiberType	read-only	current	Get fiber type of the sfp.
1.3.6.1.4.1.2356.800.2.2128.1.9.4.2.1.4	Columnes2126plusPortSFPWavelength	read-only	current	Get tx central wavelength of the sfp.
1.3.6.1.4.1.2356.800.2.2128.1.9.4.2.1.5	Columnes2126plusPortSFPBaudRate	read-only	current	Get baud rate of the sfp.
1.3.6.1.4.1.2356.800.2.2128.1.9.4.2.1.6	Columnes2126plusPortSFPVendorOUI	read-only	current	Get vendor OUI of the sfp.
1.3.6.1.4.1.2356.800.2.2128.1.9.4.2.1.7	Columnes2126plusPortSFPVendorName	read-only	current	Get vendor name of the sfp.
1.3.6.1.4.1.2356.800.2.2128.1.9.4.2.1.8	Columnes2126plusPortSFPVendorPN	read-only	current	Get vendor part number of the sfp.
1.3.6.1.4.1.2356.800.2.2128.1.9.4.2.1.9	Columnes2126plusPortSFPVendorRev	read-only	current	Get vendor revision number of the sfp.
1.3.6.1.4.1.2356.800.2.2128.1.9.4.2.1.10	Columnes2126plusPortSFPVendorSN	read-only	current	Get vendor serial number of the sfp.
1.3.6.1.4.1.2356.800.2.2128.1.9.4.2.1.11	Columnes2126plusPortSFPDateCode	read-only	current	Get data code of the sfp.
1.3.6.1.4.1.2356.800.2.2128.1.9.4.2.1.12	Columnes2126plusPortSFPTemperature	read-only	current	Get current temperature of the sfp.
1.3.6.1.4.1.2356.800.2.2128.1.9.4.2.1.13	Columnes2126plusPortSFPVcc	read-only	current	Get current internal supply voltage of the sfp.
1.3.6.1.4.1.2356.800.2.2128.1.9.4.2.1.14	Columnes2126plusPortSFPTxBias	read-only	current	Get current TX Bias of the sfp.
1.3.6.1.4.1.2356.800.2.2128.1.9.4.2.1.15	Columnes2126plusPortSFPTxPWR	read-only	current	Get current TX output power of the sfp.
1.3.6.1.4.1.2356.800.2.2128.1.9.4.2.1.16	Columnes2126plusPortSFPRxPWR	read-only	current	Get current Received Power of the sfp.
1.3.6.1.4.1.2356.800.2.2128.1.10	Nodees2126plusLoopDetectedConf
1.3.6.1.4.1.2356.800.2.2128.1.10.1	Scalares2126plusLoopDetectedNumber	read-only	current	Get the number of loop detected entry.
1.3.6.1.4.1.2356.800.2.2128.1.10.2	Tablees2126plusLoopDetectedTable	not-accessible	current	This is a list of loop detected entry. The number of entries are given by the value of es2126plusLoopDetectedNumber.
1.3.6.1.4.1.2356.800.2.2128.1.10.2.1	Rowes2126plusLoopDetectedEntry	not-accessible	current	Entry(s) for loop detected information.
1.3.6.1.4.1.2356.800.2.2128.1.10.2.1.1	Columnes2126plusLoopDetectedfIndex	read-only	current	This is the index of the loop detected entry.
1.3.6.1.4.1.2356.800.2.2128.1.10.2.1.2	Columnes2126plusLoopDetectedStateEbl	read-write	current	The state of the loop detected entry. 0 - disabled. 1 - enabled.
1.3.6.1.4.1.2356.800.2.2128.1.10.2.1.3	Columnes2126plusLoopDetectedCurrentStatus	read-only	current	The current status of the loop detected port. 0 - Unlocked 1 - Locked due to the loop condition
1.3.6.1.4.1.2356.800.2.2128.1.10.2.1.4	Columnes2126plusLoopDetectedRemoved	read-write	current	Unlock the port which is locked due to loop condition. Get this OID always return zero. 1 - Unlock the port, 0 - do nothing.
1.3.6.1.4.1.2356.800.2.2128.1.10.3	Scalares2126plusLoopDetectedAction	read-write	current	Set the corresponding action while loop is detected. 1 - Lock the loop port, 0 - do nothing.
1.3.6.1.4.1.2356.800.2.2128.1.11	Nodees2126plusMacTableInfo
1.3.6.1.4.1.2356.800.2.2128.1.11.1	Nodees2126plusMacTableMaintenance
1.3.6.1.4.1.2356.800.2.2128.1.11.1.1	Scalares2126plusMacTableAgingTime	read-write	current	Set the Mac Table Aging Time (10~1000000 Secs). 0 : Disable.
1.3.6.1.4.1.2356.800.2.2128.1.11.1.2	Scalares2126plusMacTableFlush	read-write	current	1 : Flush Mac Table.
1.3.6.1.4.1.2356.800.2.2128.1.11.1.3	Tablees2126plusMacTableLearnPortLimitTable	not-accessible	current	This is a list of MAC Learning Limitentry.
1.3.6.1.4.1.2356.800.2.2128.1.11.1.3.1	Rowes2126plusMacTableLearnPortLimitEntry	not-accessible	current	Entry(s) for Mac Table Port Learning Limit.
1.3.6.1.4.1.2356.800.2.2128.1.11.1.3.1.1	Columnes2126plusMacTableLearnPortLimitIndex	not-accessible	current	The index of the Mac Table Learning Limit entry.
1.3.6.1.4.1.2356.800.2.2128.1.11.1.3.1.2	Columnes2126plusMacTableLearnPortLimit	read-write	current	Port Learning Limit (0~8191).
1.3.6.1.4.1.2356.800.2.2128.1.11.3	Nodees2126plusMacTableStaticMac
1.3.6.1.4.1.2356.800.2.2128.1.11.3.1	Scalares2126plusMacTableStaticMacNumber	read-only	current	This is number of static Mac table entry
1.3.6.1.4.1.2356.800.2.2128.1.11.3.2	Scalares2126plusMacTableStaticMacEntryCreate	read-write	current	Creat a static mac entry.
1.3.6.1.4.1.2356.800.2.2128.1.11.3.3	Tablees2126plusMacTableStaticMacTable	not-accessible	current	This is a list of static MAC table.
1.3.6.1.4.1.2356.800.2.2128.1.11.3.3.1	Rowes2126plusMacTableStaticMacEntry	not-accessible	current	Entry(s) for Static Mac Table.
1.3.6.1.4.1.2356.800.2.2128.1.11.3.3.1.1	Columnes2126plusMacTableStaticMacIndex	not-accessible	current	The index of the static Mac Table.
1.3.6.1.4.1.2356.800.2.2128.1.11.3.3.1.2	Columnes2126plusMacTableStaticMacAddress	read-write	current	The mac address of the static mac table entry.
1.3.6.1.4.1.2356.800.2.2128.1.11.3.3.1.3	Columnes2126plusMacTableStaticMacVid	read-write	current	The vlan id of the static mac table entry.
1.3.6.1.4.1.2356.800.2.2128.1.11.3.3.1.4	Columnes2126plusMacTableStaticMacQueue	read-write	current	The queue of the static mac table entry.
1.3.6.1.4.1.2356.800.2.2128.1.11.3.3.1.5	Columnes2126plusMacTableStaticMacFwRule	read-write	current	The forwarding rule of the static mac table entry. 0 : static 1 : Static with Destination Drop 2 : Static with Source Drop
1.3.6.1.4.1.2356.800.2.2128.1.11.3.3.1.6	Columnes2126plusMacTableStaticMacPort	read-write	current	The port of the static mac table entry.
1.3.6.1.4.1.2356.800.2.2128.1.11.3.3.1.7	Columnes2126plusMacTableStaticMacEntryAction	read-write	current	The port of the static mac table entry.
1.3.6.1.4.1.2356.800.2.2128.1.11.4	Nodees2126plusMacTableMacAlias
1.3.6.1.4.1.2356.800.2.2128.1.11.4.1	Scalares2126plusMacTableMacAliasNumber	read-only	current	This is number of static Mac table entry
1.3.6.1.4.1.2356.800.2.2128.1.11.4.2	Scalares2126plusMacTableMacAliasEntryCreate	read-write	current	Creat a static mac alias entry.
1.3.6.1.4.1.2356.800.2.2128.1.11.4.3	Tablees2126plusMacTableMacAliasTable	not-accessible	current	This is a list of MAC Alias table.
1.3.6.1.4.1.2356.800.2.2128.1.11.4.3.1	Rowes2126plusMacTableMacAliasEntry	not-accessible	current	Entry(s) for Alias Mac Table.
1.3.6.1.4.1.2356.800.2.2128.1.11.4.3.1.1	Columnes2126plusMacTableMacAliasIndex	not-accessible	current	The index of the Alias Mac Table.
1.3.6.1.4.1.2356.800.2.2128.1.11.4.3.1.2	Columnes2126plusMacTableMacAliasAddress	read-write	current	The Mac address of the Alias Mac Table.
1.3.6.1.4.1.2356.800.2.2128.1.11.4.3.1.3	Columnes2126plusMacTableMacAliasAlias	read-write	current	The Mac Alias of the Alias Mac Table.
1.3.6.1.4.1.2356.800.2.2128.1.11.4.3.1.4	Columnes2126plusMacTableMacAliasEntryAction	read-write	current	The action of the alias mac table entry.
1.3.6.1.4.1.2356.800.2.2128.1.12	Nodees2126plusGVRPInfo
1.3.6.1.4.1.2356.800.2.2128.1.12.1	Nodees2126plusGvrpConf
1.3.6.1.4.1.2356.800.2.2128.1.12.1.1	Scalares2126plusGvrpConfState	read-write	current	The state of GVRP. 0 - Disable 1 - Enable
1.3.6.1.4.1.2356.800.2.2128.1.12.1.2	Tablees2126plusGvrpConfTable	not-accessible	current	This is a list of the GVRP conf table.
1.3.6.1.4.1.2356.800.2.2128.1.12.1.2.1	Rowes2126plusGvrpConfEntry	not-accessible	current	Entry(s) for the GVRP conf table.
1.3.6.1.4.1.2356.800.2.2128.1.12.1.2.1.1	Columnes2126plusGvrpConfIndex	not-accessible	current	The index of the GVRP conf table.
1.3.6.1.4.1.2356.800.2.2128.1.12.1.2.1.2	Columnes2126plusGvrpConfJoinTime	read-write	current	The join time of the GVRP entry. range: 20~100 default 20 centisecond
1.3.6.1.4.1.2356.800.2.2128.1.12.1.2.1.3	Columnes2126plusGvrpConfLeaveTime	read-write	current	The leave time of the GVRP entry. range: 60~300 default:60 centisecond
1.3.6.1.4.1.2356.800.2.2128.1.12.1.2.1.4	Columnes2126plusGvrpConfLeaveAllTime	read-write	current	The leave all time of the GVRP entry. range: 1000~5000 default: 1000 unit time
1.3.6.1.4.1.2356.800.2.2128.1.12.1.2.1.5	Columnes2126plusGvrpConfDefaultAppMode	read-write	current	The default application mode of the GVRP entry. 0 - Normal 1 - Non-Participant default: Normal
1.3.6.1.4.1.2356.800.2.2128.1.12.1.2.1.6	Columnes2126plusGvrpConfDefaultRegMode	read-write	current	The default registrar mode of the GVRP entry. 0 - Normal 1 - Fixed 2 - Forbidden default: Normal
1.3.6.1.4.1.2356.800.2.2128.1.12.1.2.1.7	Columnes2126plusGvrpConfRestrictedMode	read-write	current	The restricted mode of the GVRP entry. 0 - Disable 1 - Enable default: Disable
1.3.6.1.4.1.2356.800.2.2128.1.12.2	Nodees2126plusGvrpCounter
1.3.6.1.4.1.2356.800.2.2128.1.12.2.1	Tablees2126plusGvrpCounterTable	not-accessible	current	This is a list of the GVRP counter table.
1.3.6.1.4.1.2356.800.2.2128.1.12.2.1.1	Rowes2126plusGvrpCounterEntry	not-accessible	current	Entry(s) for the GVRP counter table.
1.3.6.1.4.1.2356.800.2.2128.1.12.2.1.1.1	Columnes2126plusGvrpCounterIndex	not-accessible	current	The port index of the GVRP counter table.
1.3.6.1.4.1.2356.800.2.2128.1.12.2.1.1.2	Columnes2126plusGvrpCounterRxTotalGvrpPkts	read-only	current	This is Rx Total GVRP packet counters.
1.3.6.1.4.1.2356.800.2.2128.1.12.2.1.1.3	Columnes2126plusGvrpCounterRxInvalidGvrpPkts	read-only	current	This is Rx Invalid GVRP packet counters.
1.3.6.1.4.1.2356.800.2.2128.1.12.2.1.1.4	Columnes2126plusGvrpCounterRxLeaveAllMsg	read-only	current	This is Rx LeaveAll message packet counters.
1.3.6.1.4.1.2356.800.2.2128.1.12.2.1.1.5	Columnes2126plusGvrpCounterRxJoinEmptyMsg	read-only	current	This is Rx JoinEmpty message packet counters.
1.3.6.1.4.1.2356.800.2.2128.1.12.2.1.1.6	Columnes2126plusGvrpCounterRxJoinInMsg	read-only	current	This is Rx JoinIn message packet counters.
1.3.6.1.4.1.2356.800.2.2128.1.12.2.1.1.7	Columnes2126plusGvrpCounterRxLeaveEmptyMsg	read-only	current	This is Rx LeaveEmpty message packet counters.
1.3.6.1.4.1.2356.800.2.2128.1.12.2.1.1.8	Columnes2126plusGvrpCounterRxEmptyMsg	read-only	current	This is Rx Empty message packet counters.
1.3.6.1.4.1.2356.800.2.2128.1.12.2.1.1.9	Columnes2126plusGvrpCounterTxTotalGvrpPkts	read-only	current	This is Tx Total GVRP packet counters.
1.3.6.1.4.1.2356.800.2.2128.1.12.2.1.1.10	Columnes2126plusGvrpCounterTxLeaveAllMsg	read-only	current	This is Tx LeaveAll message packet counters.
1.3.6.1.4.1.2356.800.2.2128.1.12.2.1.1.11	Columnes2126plusGvrpCounterTxJoinEmptyMsg	read-only	current	This is Tx JoinEmpty message packet counters.
1.3.6.1.4.1.2356.800.2.2128.1.12.2.1.1.12	Columnes2126plusGvrpCounterTxJoinInMsg	read-only	current	This is Tx JoinIn message packet counters.
1.3.6.1.4.1.2356.800.2.2128.1.12.2.1.1.13	Columnes2126plusGvrpCounterTxLeaveEmptyMsg	read-only	current	This is Tx LeaveEmpty message packet counters.
1.3.6.1.4.1.2356.800.2.2128.1.12.2.1.1.14	Columnes2126plusGvrpCounterTxEmptyMsg	read-only	current	This is Tx Empty message packet counters.
1.3.6.1.4.1.2356.800.2.2128.1.12.3	Nodees2126plusGvrpGroup
1.3.6.1.4.1.2356.800.2.2128.1.12.3.1	Scalares2126plusGvrpGroupNumber	read-only	current	This is number of the GVRP group table entry.
1.3.6.1.4.1.2356.800.2.2128.1.12.3.2	Tablees2126plusGvrpGroupTable	not-accessible	current	This is a list of the GVRP group table.
1.3.6.1.4.1.2356.800.2.2128.1.12.3.2.1	Rowes2126plusGvrpGroupEntry	not-accessible	current	Entry(s) for the GVRP group table.
1.3.6.1.4.1.2356.800.2.2128.1.12.3.2.1.1	Columnes2126plusGvrpGroupId	read-only	current	The index of the GVRP group table.
1.3.6.1.4.1.2356.800.2.2128.1.12.3.2.1.2	Columnes2126plusGvrpGroupVid	read-only	current	This is vid of GVRP group.
1.3.6.1.4.1.2356.800.2.2128.1.12.3.2.1.3	Columnes2126plusGvrpGroupMemberPort	read-only	current	This is the member port of GVRP group.
1.3.6.1.4.1.2356.800.2.2128.1.13	Nodees2126plusSecurity
1.3.6.1.4.1.2356.800.2.2128.1.13.1	Scalares2126plusIsolatedPortGroup	read-write	current	This is isolated group. 0: Disable
1.3.6.1.4.1.2356.800.2.2128.1.13.2	Nodees2126plusMirror
1.3.6.1.4.1.2356.800.2.2128.1.13.2.1	Scalares2126plusMirrorMode	read-write	current	This is mirror mode. 0 - Disable 1 - Enable
1.3.6.1.4.1.2356.800.2.2128.1.13.2.2	Scalares2126plusMonitoringPort	read-write	current	This is monitoring port.
1.3.6.1.4.1.2356.800.2.2128.1.13.2.3	Scalares2126plusMonitoredIngressPort	read-write	current	This is monitored ingress ports.
1.3.6.1.4.1.2356.800.2.2128.1.13.2.4	Scalares2126plusMonitoredEgressPort	read-write	current	This is monitored egress ports.
1.3.6.1.4.1.2356.800.2.2128.1.13.3	Nodees2126plusRestrictedGroup
1.3.6.1.4.1.2356.800.2.2128.1.13.3.1	Scalares2126plusRestrictedGroupIngress	read-write	current	This is the ingress port members of restricted group.
1.3.6.1.4.1.2356.800.2.2128.1.13.3.2	Scalares2126plusRestrictedGroupEgress	read-write	current	This is the egress port members of restricted group.
1.3.6.1.4.1.2356.800.2.2128.1.14	Nodees2126plusVirtualStack
1.3.6.1.4.1.2356.800.2.2128.1.14.1	Scalares2126plusVirtualStackState	read-write	current	Set the Virtual Stack State. 0 : disable, 1 : enable
1.3.6.1.4.1.2356.800.2.2128.1.14.2	Scalares2126plusVirtualStackRole	read-write	current	Set the Virtual Stack Role. 0 : slave, 1 : master
1.3.6.1.4.1.2356.800.2.2128.1.14.3	Scalares2126plusVirtualStackGroupID	read-write	current	Set the Virtual Stack Group ID.
1.3.6.1.4.1.2356.800.2.2128.1.15	Nodees2126plusManagementSecurity
1.3.6.1.4.1.2356.800.2.2128.1.15.1	Scalares2126plusManagementSecurityNumber	read-only	current	This is number of the management security table entry.
1.3.6.1.4.1.2356.800.2.2128.1.15.2	Scalares2126plusManagementSecurityEntryCreate	read-write	current	Creat a management security entry.
1.3.6.1.4.1.2356.800.2.2128.1.15.3	Tablees2126plusManagementSecurityTable	not-accessible	current	This is a list of the management security table.
1.3.6.1.4.1.2356.800.2.2128.1.15.3.1	Rowes2126plusManagementSecurityEntry	not-accessible	current	Entry(s) for the management security table.
1.3.6.1.4.1.2356.800.2.2128.1.15.3.1.1	Columnes2126plusManagementSecurityIndex	not-accessible	current	The index of the management security table.
1.3.6.1.4.1.2356.800.2.2128.1.15.3.1.2	Columnes2126plusManagementSecurityName	read-write	current	The name of the management security entry.
1.3.6.1.4.1.2356.800.2.2128.1.15.3.1.3	Columnes2126plusManagementSecurityVid	read-write	current	This is the vid of the management security entry. 0: any VID.
1.3.6.1.4.1.2356.800.2.2128.1.15.3.1.4	Columnes2126plusManagementSecurityIpRange	read-write	current	This is the IP range of the management security entry. 0: any IP.
1.3.6.1.4.1.2356.800.2.2128.1.15.3.1.5	Columnes2126plusManagementSecurityIncomigPort	read-write	current	This is the ports of the management security entry. 0: any incoming port.
1.3.6.1.4.1.2356.800.2.2128.1.15.3.1.6	Columnes2126plusManagementSecurityAccessType	read-write	current	This is the access type of the management security entry. 0: http, telnet, and SNMP.
1.3.6.1.4.1.2356.800.2.2128.1.15.3.1.7	Columnes2126plusManagementSecurityAction	read-write	current	This is the action of the management security entry. 0:deny 1:accept
1.3.6.1.4.1.2356.800.2.2128.1.15.3.1.8	Columnes2126plusManagementSecurityEntryAction	read-write	current	The action the management security entry.
1.3.6.1.4.1.2356.800.2.2128.1.16	Nodees2126plusQoS
1.3.6.1.4.1.2356.800.2.2128.1.16.1	Nodees2126plusQoSGlobalConfig
1.3.6.1.4.1.2356.800.2.2128.1.16.1.1	Scalares2126plusQoSMode	read-write	current	The mode of QoS. 0 - Disable 1 - Enable
1.3.6.1.4.1.2356.800.2.2128.1.16.1.2	Scalares2126plusQosPriorityControl1p	read-write	current	This is the priority control for 802.1p. 0 - Disable 1 - Enable
1.3.6.1.4.1.2356.800.2.2128.1.16.1.3	Scalares2126plusQosPriorityControlTOS	read-write	current	This is the priority control for TOS. 0 - Disable 1 - Enable
1.3.6.1.4.1.2356.800.2.2128.1.16.1.4	Scalares2126plusQosPriorityControlDSCP	read-write	current	This is the priority control for DSCP. 0 - Disable 1 - Enable
1.3.6.1.4.1.2356.800.2.2128.1.16.1.5	Scalares2126plusQoSSchedulingMethod	read-write	current	This is the scheduling method. 0 - WRR 1 - Strict
1.3.6.1.4.1.2356.800.2.2128.1.16.1.6	Scalares2126plusQoSWeightQ0	read-write	current	This is the weigtht of Queue0.
1.3.6.1.4.1.2356.800.2.2128.1.16.1.7	Scalares2126plusQoSWeightQ1	read-write	current	This is the weigtht of Queue1.
1.3.6.1.4.1.2356.800.2.2128.1.16.1.8	Scalares2126plusQoSWeightQ2	read-write	current	This is the weigtht of Queue2.
1.3.6.1.4.1.2356.800.2.2128.1.16.1.9	Scalares2126plusQoSWeightQ3	read-write	current	This is the weigtht of Queue3.
1.3.6.1.4.1.2356.800.2.2128.1.16.2	Scalares2126plusQoSVIPPort	read-write	current	This is the VIP group for QoS.
1.3.6.1.4.1.2356.800.2.2128.1.16.3	Nodees2126plusQoS1pPriority
1.3.6.1.4.1.2356.800.2.2128.1.16.3.1	Tablees2126plusQoS1pPriorityTable	not-accessible	current	This is a list of the 802.1p.
1.3.6.1.4.1.2356.800.2.2128.1.16.3.1.1	Rowes2126plusQoS1pPriorityEntry	not-accessible	current	Entry(s) for the 802.1p priority table.
1.3.6.1.4.1.2356.800.2.2128.1.16.3.1.1.1	Columnes2126plusQoS1pPriorityIndex	not-accessible	current	The index of the 802.1p priority table.
1.3.6.1.4.1.2356.800.2.2128.1.16.3.1.1.2	Columnes2126plusQoS1pPriorityValue	read-only	current	The value of 802.1p priority entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.3.1.1.3	Columnes2126plusQoS1pPriorityQueue	read-write	current	The queue of 802.1p priority entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.4	Nodees2126plusQoSDTypeTOSPriority
1.3.6.1.4.1.2356.800.2.2128.1.16.4.1	Tablees2126plusQoSDTypeTOSPriorityTable	not-accessible	current	This is a list of the TOS delay priority mapping entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.4.1.1	Rowes2126plusQoSDTypeTOSPriorityEntry	not-accessible	current	Entry(s) for the ToS delay priority mapping entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.4.1.1.1	Columnes2126plusQoSDTypeTOSPriorityIndex	not-accessible	current	The index of the ToS delay priority mapping table.
1.3.6.1.4.1.2356.800.2.2128.1.16.4.1.1.2	Columnes2126plusQoSDTypeTOSPriorityValue	read-only	current	The value of ToS delay priority mapping entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.4.1.1.3	Columnes2126plusQoSDTypeTOSPriorityQueue	read-write	current	The queue of ToS delay priority mapping entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.5	Nodees2126plusQoSTTypeTOSPriority
1.3.6.1.4.1.2356.800.2.2128.1.16.5.1	Tablees2126plusQoSTTypeTOSPriorityTable	not-accessible	current	This is a list of the ToS throughput priority mapping entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.5.1.1	Rowes2126plusQoSTTypeTOSPriorityEntry	not-accessible	current	Entry(s) for the TOS Throughput mapping entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.5.1.1.1	Columnes2126plusQoSTTypeTOSPriorityIndex	not-accessible	current	The index of the TOS throughput priority mapping table.
1.3.6.1.4.1.2356.800.2.2128.1.16.5.1.1.2	Columnes2126plusQoSTTypeTOSPriorityValue	read-only	current	The value of TOS throughput priority mapping entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.5.1.1.3	Columnes2126plusQoSTTypeTOSPriorityQueue	read-write	current	The queue of TOS throughput priority mapping entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.6	Nodees2126plusQoSRTypeTOSPriority
1.3.6.1.4.1.2356.800.2.2128.1.16.6.1	Tablees2126plusQoSRTypeTOSPriorityTable	not-accessible	current	This is a list of the ToS reliability priority mapping entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.6.1.1	Rowes2126plusQoSRTypeTOSPriorityEntry	not-accessible	current	Entry(s) for the TOS reliability mapping entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.6.1.1.1	Columnes2126plusQoSRTypeTOSPriorityIndex	not-accessible	current	The index of the TOS reliability priority mapping table.
1.3.6.1.4.1.2356.800.2.2128.1.16.6.1.1.2	Columnes2126plusQoSRTypeTOSPriorityValue	read-only	current	The value of TOS reliability priority mapping entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.6.1.1.3	Columnes2126plusQoSRTypeTOSPriorityQueue	read-write	current	The queue of TOS reliability priority mapping entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.7	Nodees2126plusQoSMTypeTOSPriority
1.3.6.1.4.1.2356.800.2.2128.1.16.7.1	Tablees2126plusQoSMTypeTOSPriorityTable	not-accessible	current	This is a list of the ToS monetary cost priority mapping entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.7.1.1	Rowes2126plusQoSMTypeTOSPriorityEntry	not-accessible	current	Entry(s) for the TOS monetary cost mapping entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.7.1.1.1	Columnes2126plusQoSMTypeTOSPriorityIndex	not-accessible	current	The index of the TOS monetary cost priority mapping table.
1.3.6.1.4.1.2356.800.2.2128.1.16.7.1.1.2	Columnes2126plusQoSMTypeTOSPriorityValue	read-only	current	The value of TOS monetary cost priority mapping entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.7.1.1.3	Columnes2126plusQoSMTypeTOSPriorityQueue	read-write	current	The queue of TOS monetary cost priority mapping entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.8	Nodees2126plusQoSDSCPPriority
1.3.6.1.4.1.2356.800.2.2128.1.16.8.1	Tablees2126plusQoSDSCPPriorityTable	not-accessible	current	This is a list of the DSCP priority entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.8.1.1	Rowes2126plusQoSDSCPPriorityEntry	not-accessible	current	Entry(s) for the DSCP priority mapping entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.8.1.1.1	Columnes2126plusQoSDSCPPriorityIndex	not-accessible	current	The index of the DSCP priority priority mapping table.
1.3.6.1.4.1.2356.800.2.2128.1.16.8.1.1.2	Columnes2126plusQoSDSCPPriorityValue	read-only	current	The value of DSCP priority priority mapping entry.
1.3.6.1.4.1.2356.800.2.2128.1.16.8.1.1.3	Columnes2126plusQoSDSCPPriorityQueue	read-write	current	The queue of DSCP priority priority mapping entry.
1.3.6.1.4.1.2356.800.2.2128.1.17	Nodees2126plusVlan
1.3.6.1.4.1.2356.800.2.2128.1.17.1	Nodees2126plusVlanModeConfig
1.3.6.1.4.1.2356.800.2.2128.1.17.1.1	Scalares2126plusVlanMode	read-write	current	0:Tag-based, 1:Port-based, 2:Metro mode
1.3.6.1.4.1.2356.800.2.2128.1.17.1.2	Scalares2126plusSymmetricVlan	read-write	current	Symmetric VLAN: for tag-based 0:disable, 1:enable
1.3.6.1.4.1.2356.800.2.2128.1.17.1.3	Scalares2126plusVlanSVL	read-write	current	SVL: : for tag-based 0:disable, 1:enable
1.3.6.1.4.1.2356.800.2.2128.1.17.1.4	Scalares2126plusDoubleTag	read-write	current	Double Tag: for tag-based 0:disable, 1:enable
1.3.6.1.4.1.2356.800.2.2128.1.17.1.5	Scalares2126plusUpLinkPort	read-write	current	Up link Port: for Metro mode 0:Port 25, 1:Port 26, 2:Port 25 & 26
1.3.6.1.4.1.2356.800.2.2128.1.17.2	Nodees2126plusTagBasedVlanGroup
1.3.6.1.4.1.2356.800.2.2128.1.17.2.1	Scalares2126plusTagBasedVlanNumbers	read-only	current	Total numbers for tag-based vlan.
1.3.6.1.4.1.2356.800.2.2128.1.17.2.2	Scalares2126plusTagBasedCreateStatus	read-write	current	Creat a temp vlan in tag-based vlan table. 0 : none, 1~4094 : creat with this vid.
1.3.6.1.4.1.2356.800.2.2128.1.17.2.3	Tablees2126plusTagBasedVlanTable	not-accessible	current
1.3.6.1.4.1.2356.800.2.2128.1.17.2.3.1	Rowes2126plusTagBasedVlanEntry	not-accessible	current	Entry(s) for tag-based vlan table.
1.3.6.1.4.1.2356.800.2.2128.1.17.2.3.1.1	Columnes2126plusTagBasedVlanVid	not-accessible	current	The vid of vlan.
1.3.6.1.4.1.2356.800.2.2128.1.17.2.3.1.2	Columnes2126plusTagBasedVlanName	read-write	current	The name of vlan.
1.3.6.1.4.1.2356.800.2.2128.1.17.2.3.1.3	Columnes2126plusTagBasedVlanMember	read-write	current	The member of vlan.
1.3.6.1.4.1.2356.800.2.2128.1.17.2.3.1.4	Columnes2126plusTagBasedVlanUntag	read-write	current	The untag port of vlan.
1.3.6.1.4.1.2356.800.2.2128.1.17.2.3.1.5	Columnes2126plusTagBasedVlanRowStatus	read-write	current	The row status of vlan. 1 : active, 2 : not-inService, 3 : delete
1.3.6.1.4.1.2356.800.2.2128.1.17.3	Nodees2126plusVlanPvid
1.3.6.1.4.1.2356.800.2.2128.1.17.3.1	Tablees2126plusVlanPvidTable	not-accessible	current
1.3.6.1.4.1.2356.800.2.2128.1.17.3.1.1	Rowes2126plusVlanPvidEntry	not-accessible	current	Entry(s) for Vlan Pvid.
1.3.6.1.4.1.2356.800.2.2128.1.17.3.1.1.1	Columnes2126plusVlanPvidPort	not-accessible	current	The port number of pvid entry.
1.3.6.1.4.1.2356.800.2.2128.1.17.3.1.1.2	Columnes2126plusVlanPvidValue	read-write	current	The pvid value of port.
1.3.6.1.4.1.2356.800.2.2128.1.17.3.1.1.3	Columnes2126plusVlanPvidDefaultPriority	read-write	current	The default priority of port .
1.3.6.1.4.1.2356.800.2.2128.1.17.3.1.1.4	Columnes2126plusVlanPvidDropUntag	read-write	current	The drop untag of port .
1.3.6.1.4.1.2356.800.2.2128.1.17.4	Nodees2126plusPortBasedVlanGroup
1.3.6.1.4.1.2356.800.2.2128.1.17.4.1	Scalares2126plusPortBasedVlanNumbers	read-only	current	Total numbers for tag-based vlan.
1.3.6.1.4.1.2356.800.2.2128.1.17.4.2	Scalares2126plusPortBasedCreateStatus	read-write	current	Creat a temp vlan in port-based vlan table. 0 : none, 1 : creat a new port-based vlan.
1.3.6.1.4.1.2356.800.2.2128.1.17.4.3	Tablees2126plusPortBasedVlanTable	not-accessible	current
1.3.6.1.4.1.2356.800.2.2128.1.17.4.3.1	Rowes2126plusPortBasedVlanEntry	not-accessible	current	Entry(s) for port-based vlan table.
1.3.6.1.4.1.2356.800.2.2128.1.17.4.3.1.1	Columnes2126plusPortBasedVlanIndex	not-accessible	current	The index of vlan.
1.3.6.1.4.1.2356.800.2.2128.1.17.4.3.1.2	Columnes2126plusPortBasedVlanName	read-write	current	The name of vlan.
1.3.6.1.4.1.2356.800.2.2128.1.17.4.3.1.3	Columnes2126plusPortBasedVlanMember	read-write	current	The member of vlan.
1.3.6.1.4.1.2356.800.2.2128.1.17.4.3.1.4	Columnes2126plusPortBasedVlanRowStatus	read-write	current	The row status of vlan. 1 : active, 2 : not-inService, 3 : delete
1.3.6.1.4.1.2356.800.2.2128.1.17.5	Nodees2126plusManagementVlan
1.3.6.1.4.1.2356.800.2.2128.1.17.5.1	Scalares2126plusManagementVlanState	read-write	current	The stat of management vlan. 0 : Disable, 1 : Enable.
1.3.6.1.4.1.2356.800.2.2128.1.17.5.2	Scalares2126plusManagementVlanVid	read-write	current	The vid value of management vlan.
1.3.6.1.4.1.2356.800.2.2128.1.18	Nodees2126plusDot1X
1.3.6.1.4.1.2356.800.2.2128.1.18.1	Nodees2126plusDot1XStateSetting
1.3.6.1.4.1.2356.800.2.2128.1.18.1.1	Scalares2126plusRadiusServer	read-write	current	Set radius server ip
1.3.6.1.4.1.2356.800.2.2128.1.18.1.2	Scalares2126plusDot1XPort	read-write	current	Set 802.1X port number
1.3.6.1.4.1.2356.800.2.2128.1.18.1.3	Scalares2126plusSecretKey	read-write	current	Set 802.1X secret key
1.3.6.1.4.1.2356.800.2.2128.1.18.1.4	Scalares2126plusAccountingService	read-write	current	Set 802.1X accounting service 0 : disable 1 : enable
1.3.6.1.4.1.2356.800.2.2128.1.18.1.5	Scalares2126plusAccountingServer	read-write	current	Set 802.1X accounting server
1.3.6.1.4.1.2356.800.2.2128.1.18.1.6	Scalares2126plusAccountingPort	read-write	current	Set 802.1X accounting port number
1.3.6.1.4.1.2356.800.2.2128.1.18.2	Nodees2126plusDot1XPortSecurityManagement
1.3.6.1.4.1.2356.800.2.2128.1.18.2.1	Tablees2126plusDot1XPortSecurityTable	not-accessible	current	This is a list of the 802.1x port security entry.
1.3.6.1.4.1.2356.800.2.2128.1.18.2.1.1	Rowes2126plusDot1XPortSecurityEntry	not-accessible	current	Entry(s) for 802.1x port security management table.
1.3.6.1.4.1.2356.800.2.2128.1.18.2.1.1.1	Columnes2126plusDot1XPortSecurityPortIndex	not-accessible	current	The port index of 802.1x port security.
1.3.6.1.4.1.2356.800.2.2128.1.18.2.1.1.2	Columnes2126plusDot1XPortSecurityMode	read-write	current	The mode of 802.1x port security. 0 : Disable, 1 : Normal, 2 : Advanced 802.1X (Dual port no support)
1.3.6.1.4.1.2356.800.2.2128.1.18.2.1.1.3	Columnes2126plusDot1XPortSecurityPortControl	read-write	current	The port control of 802.1x port security. 0 : ForceUnauthorized, 1 : ForceAuthorized, 2 : Auto
1.3.6.1.4.1.2356.800.2.2128.1.18.2.1.1.4	Columnes2126plusDot1XPortSecurityReAuthMax	read-write	current	The reAuthMax(1~10) of 802.1x port security.
1.3.6.1.4.1.2356.800.2.2128.1.18.2.1.1.5	Columnes2126plusDot1XPortSecurityTxPeriod	read-write	current	The txPeriod(1~65535) of 802.1x port security.
1.3.6.1.4.1.2356.800.2.2128.1.18.2.1.1.6	Columnes2126plusDot1XPortSecurityQuietPeriod	read-write	current	The quiet period(0~65535) of 802.1x port security.
1.3.6.1.4.1.2356.800.2.2128.1.18.2.1.1.7	Columnes2126plusDot1XPortSecurityReAuthEnabled	read-write	current	The reAuthEnabled of 802.1x port security. 0 : off, 1 : on.
1.3.6.1.4.1.2356.800.2.2128.1.18.2.1.1.8	Columnes2126plusDot1XPortSecurityReAuthPeriod	read-write	current	The reAuthPeriod(1~65535) of 802.1x port security.
1.3.6.1.4.1.2356.800.2.2128.1.18.2.1.1.9	Columnes2126plusDot1XPortSecurityMaxRequest	read-write	current	The max.request(1~10) of 802.1x port security.
1.3.6.1.4.1.2356.800.2.2128.1.18.2.1.1.10	Columnes2126plusDot1XPortSecuritySuppTimeout	read-write	current	The suppTimeout(1~65535) of 802.1x port security.
1.3.6.1.4.1.2356.800.2.2128.1.18.2.1.1.11	Columnes2126plusDot1XPortSecurityServerTimeout	read-write	current	The server timeout(1~65535) of 802.1x port security.
1.3.6.1.4.1.2356.800.2.2128.1.18.2.1.1.12	Columnes2126plusDot1XPortSecurityStatus	read-only	current	The status of 802.1x port security.
1.3.6.1.4.1.2356.800.2.2128.1.19	Nodees2126plusTrunkInfo
1.3.6.1.4.1.2356.800.2.2128.1.19.1	Nodees2126plusTrunkPort
1.3.6.1.4.1.2356.800.2.2128.1.19.1.1	Tablees2126plusTrunkPortTable	not-accessible	current
1.3.6.1.4.1.2356.800.2.2128.1.19.1.1.1	Rowes2126plusTrunkPortEntry	not-accessible	current	Entry(s) for trunk table.
1.3.6.1.4.1.2356.800.2.2128.1.19.1.1.1.1	Columnes2126plusTrunkPortIndex	not-accessible	current	The port index of trunk table.
1.3.6.1.4.1.2356.800.2.2128.1.19.1.1.1.2	Columnes2126plusTrunkPortMethod	read-write	current	The method of trunk port. 0 : None, 1 : LACP, 2 : Static.
1.3.6.1.4.1.2356.800.2.2128.1.19.1.1.1.3	Columnes2126plusTrunkPortGroup	read-write	current	The group(0~3) of trunk port.
1.3.6.1.4.1.2356.800.2.2128.1.19.1.1.1.4	Columnes2126plusTrunkPortActiveLacp	read-write	current	The active lacp mode of trunk port. 0 : Passive, 1 : Active.
1.3.6.1.4.1.2356.800.2.2128.1.19.1.1.1.5	Columnes2126plusTrunkPortAggtr	read-only	current	The Aggtr of trunk port.
1.3.6.1.4.1.2356.800.2.2128.1.19.1.1.1.6	Columnes2126plusTrunkPortStatus	read-only	current	The status of trunk port. 0 : None, 1 : Ready.
1.3.6.1.4.1.2356.800.2.2128.1.19.1.1.1.7	Columnes2126plusTrunkPortCurrentMode	read-write	current	The current mode of trunk port entry. 0 : Active mode, 1 : Edit mode, 2 : Do edit.
1.3.6.1.4.1.2356.800.2.2128.1.19.2	Nodees2126plusAggregatorView
1.3.6.1.4.1.2356.800.2.2128.1.19.2.1	Tablees2126plusAggregatorViewTable	not-accessible	current
1.3.6.1.4.1.2356.800.2.2128.1.19.2.1.1	Rowes2126plusAggregatorViewEntry	not-accessible	current	Entry(s) for aggregator view table.
1.3.6.1.4.1.2356.800.2.2128.1.19.2.1.1.1	Columnes2126plusAggregatorViewIndex	not-accessible	current	The port index of aggregator view table.
1.3.6.1.4.1.2356.800.2.2128.1.19.2.1.1.2	Columnes2126plusAggregatorViewMethod	read-only	current	The method of aggregator view table. 0 : None, 1 : LACP, 2 : Static.
1.3.6.1.4.1.2356.800.2.2128.1.19.2.1.1.3	Columnes2126plusAggregatorViewMemberPorts	read-only	current	The member ports of aggregator view table.
1.3.6.1.4.1.2356.800.2.2128.1.19.2.1.1.4	Columnes2126plusAggregatorViewReadyPorts	read-only	current	The ready ports of aggregator view table.
1.3.6.1.4.1.2356.800.2.2128.1.19.3	Nodees2126plusLacpSystemConfiguration
1.3.6.1.4.1.2356.800.2.2128.1.19.3.1	Scalares2126plusLacpSystemPriority	read-write	current	The priority of LACP system.
1.3.6.1.4.1.2356.800.2.2128.1.19.3.2	Scalares2126plusLacpSystemHashMethod	read-write	current	The hash method of LACP system. 0 : DA and SA 1 : SA 2 : DA
1.3.6.1.4.1.2356.800.2.2128.1.20	Nodees2126plusTrapEntry
1.3.6.1.4.1.2356.800.2.2128.1.20.1	Notificationes2126plusModuleInserted		current	Send the trap when a module is inserted to the system. The OID value means the port number.
1.3.6.1.4.1.2356.800.2.2128.1.20.2	Notificationes2126plusModuleRemoved		current	Send the trap when a module is removed from the system. The OID value means the port number.
1.3.6.1.4.1.2356.800.2.2128.1.20.3	Notificationes2126plusDualMediaSwapped		current	Send the trap when the dual media port changed. The OID value means the port number.
1.3.6.1.4.1.2356.800.2.2128.1.20.4	Notificationes2126plusLoopDetected		current	Send the trap when loop condition has been detected. The OID value means the port number.
1.3.6.1.4.1.2356.800.2.2128.1.20.5	Notificationes2126plusLoginProtected		current	Send the trap when login protect has been detected.
1.3.6.1.4.1.2356.800.2.2128.1.20.100	Notificationes2126plusStpStateDisabled		current	Send the trap when the operational state of STP is from enabled to disabled.
1.3.6.1.4.1.2356.800.2.2128.1.20.101	Notificationes2126plusStpStateEnabled		current	Send the trap when the operational state of STP is from disabled to enabled.
1.3.6.1.4.1.2356.800.2.2128.1.20.102	Notificationes2126plusStpTopologyChanged		current	Send the trap when RSTP determines a port should enter the FORWARDING state (a topology change occurs). The OID value is the ifIndex of the port that produces …
1.3.6.1.4.1.2356.800.2.2128.1.20.110	Notificationes2126plusRmonRisingAlarm		current	Send the trap when an RMON rising alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that exceeds its own Risin…
1.3.6.1.4.1.2356.800.2.2128.1.20.111	Notificationes2126plusRmonFallingAlarm		current	Send the trap when an RMON falling alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that is smaller than its …
1.3.6.1.4.1.2356.800.2.2128.1.20.120	Notificationes2126plusLacpStateDisabled		current	Send the trap when the operational state of LACP is from enabled to disabled. The OID value means the disabled Group ID.
1.3.6.1.4.1.2356.800.2.2128.1.20.121	Notificationes2126plusLacpStateEnabled		current	Send the trap when the operational state of LACP is from disabled to enabled. The OID value means the disabled Group ID.
1.3.6.1.4.1.2356.800.2.2128.1.20.123	Notificationes2126plusLacpPortAdded		current	Send the trap when the state of port is in 'trunk ready'.
1.3.6.1.4.1.2356.800.2.2128.1.20.124	Notificationes2126plusLacpPortTrunkFailure		current	Send the trap when one port is not able to be aggregated due to duplex-mode of the port.
1.3.6.1.4.1.2356.800.2.2128.1.20.140	Notificationes2126plusGvrpStateDisabled		current	Send the trap when the operational state of GVRP is from enabled to disabled.
1.3.6.1.4.1.2356.800.2.2128.1.20.141	Notificationes2126plusGvrpStateEnabled		current	Send the trap when the operational state of LACP is from disabled to enabled.
1.3.6.1.4.1.2356.800.2.2128.1.20.151	Notificationes2126plusVlanPortBaseEnabled		current	Send the trap when the operational state of vlan is changed to port-based vlan.
1.3.6.1.4.1.2356.800.2.2128.1.20.152	Notificationes2126plusVlanTagBaseEnabled		current	Send the trap when the operational state of vlan is changed to tag-based vlan.
1.3.6.1.4.1.2356.800.2.2128.1.20.153	Notificationes2126plusVlanMetroBaseEnabled		current	Send the trap when the operational state of vlan is changed to metro-based vlan.
1.3.6.1.4.1.2356.800.2.2128.1.20.200	Notificationes2126plusUserLogin		current	Send the trap when one user logins the system.
1.3.6.1.4.1.2356.800.2.2128.1.20.201	Notificationes2126plusUserLogout		current	Send the trap when one user logouts the system.
1.3.6.1.4.1.2356.800.2.2128.1.21	Nodees2126plusTrapVariable
1.3.6.1.4.1.2356.800.2.2128.1.21.1	Scalarusername	read-only	current	System account name.
1.3.6.1.4.1.2356.800.2.2128.1.21.2	ScalargroupId	read-only	current	The Trunk group ID of LACP.
1.3.6.1.4.1.2356.800.2.2128.1.21.3	Scalaractorkey	read-only	current	The actor key information for LACP.
1.3.6.1.4.1.2356.800.2.2128.1.21.4	Scalarpartnerkey	read-only	current	The partner key information for LACP.
1.3.6.1.4.1.2356.800.2.2128.1.21.5	Scalaruplink	read-only	current	Uplink port(s) in the metro-mode vlan.
1.3.6.1.4.1.2356.800.2.2128.1.21.6	ScalarloginProtectInfo	read-only	current	Loging protect information.
1.3.6.1.4.1.2356.800.2.2128.1.22	Nodees2126plusLoginProtect
1.3.6.1.4.1.2356.800.2.2128.1.22.1	Scalares2126plusLockTime	read-write	current	Set the login lock time. Available from 0 to 10 (minutes) Set 0 as disabled.
1.3.6.1.4.1.2356.800.2.2128.1.22.2	Scalares2126plusErrorCount	read-write	current	Set login error count. Available from 0 to 10 (times) Set 0 as disabled.

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

LANCOM-ES-2126PLUS-MIB