LANCOM-ES-2126PPLUS-MIB
457 objects
The MIB module is for LANCOM Systems
Imported Objects
| BRIDGE-MIB | MacAddress |
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2356 | IdentitylancomSystems | The MIB module is for LANCOM Systems | ||
| 1.3.6.1.4.1.2356.800 | NodeswitchingSystems | |||
| 1.3.6.1.4.1.2356.800.2 | NodefastEthernetSwitches | |||
| 1.3.6.1.4.1.2356.800.2.2129 | NodelancomES2126P | |||
| 1.3.6.1.4.1.2356.800.2.2129.1 | Nodees2126PoEplusProduces | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.1 | Nodees2126PoEplusSystem | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.1.1 | Nodees2126PoEplusCommonSys | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.1.1.1 | Scalares2126PoEplusReboot | read-write | current | Reboot the system. Get this OID always return zero. 0 - do nothing 1 - Reboot without saving start 2 - Reboot with saving start |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.1.2 | Scalares2126PoEplusBiosVsersion | read-only | current | Get the BIOS version of the system. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.1.3 | Scalares2126PoEplusFirmwareVersion | read-only | current | Get the firmware version of the system. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.1.4 | Scalares2126PoEplusHardwareVersion | read-only | current | Get the hardware version of the system. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.1.5 | Scalares2126PoEplusMechanicalVersion | read-only | current | Get the mechanical version of the system. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.1.6 | Scalares2126PoEplusSerialNumber | read-only | current | Get the Serial number of the system. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.1.7 | Scalares2126PoEplusHostMacAddress | read-only | current | Get the MAC address of the system. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.1.8 | Scalares2126PoEplusDevicePort | read-only | current | Get the quantity of ports that this system owns now. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.1.9 | Scalares2126PoEplusRamSize | read-only | current | Get the RAM size of the system. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.1.10 | Scalares2126PoEplusFlashSize | read-only | current | Get the flash size of the system. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.1.11 | Scalares2126PoEplusSystemDescription | read-only | current | Get the system description. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.1.12 | Scalares2126PoEplusDeviceName | read-write | current | Get/Set the device Name. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.2 | Nodees2126PoEplusIP | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.1.2.1 | Scalares2126PoEplusDhcpSetting | read-write | current | Get/Set DHCP status of the system. 0 - DHCP disable 1 - DHCP enable |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.2.2 | Scalares2126PoEplusIPAddress | read-write | current | Get/Set the IP address of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.2.3 | Scalares2126PoEplusNetMask | read-write | current | Get/Set the subnet mask of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.2.4 | Scalares2126PoEplusDefaultGateway | read-write | current | Get/Set the default gateway of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.2.5 | Scalares2126PoEplusDnsSetting | read-write | current | Get/Set the source of DNS server. You can't set this OID if DHCP status is disabled. 0 - manual, the DNS server is from manual setting 1 - Auto, the DNS server… |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.2.6 | Scalares2126PoEplusDnsServer | read-write | current | Get/Set the DNS server of the system. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.3 | Nodees2126PoEplusTime | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.1.3.1 | Scalares2126PoEplusSystemCurrentTime | read-only | current | Get the current time of the system. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.3.2 | Scalares2126PoEplusManualTimeSetting | read-write | current | Get/Set the system time of the device. The input format is 'Year/Month/Day/Hour/Minute/Second'. Ex: 2004/1/1/12/34/25 means 2004/1/1 - 12:24:25. Value range: Y… |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.3.3 | Scalares2126PoEplusNTPServer | read-write | current | Get/Set the NTP Time Server. You can use the IP address or domain name. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.3.4 | Scalares2126PoEplusNTPTimeZone | read-write | current | Get/Set the NTP Time Zone. Value range is between -12 and 13 -12 - GMT -12:00, -11 - GMT -11:00, -10 - GMT -10:00, -9 - GMT -09:00, -8 - GMT -08:00, -7 - GMT -… |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.3.5 | Scalares2126PoEplusNTPTimeSync | read-write | current | Sync time from NTP Server. Get this OID always return zero. Set the Time Server and Time Zone before doing time sync. Notice that time server must be correct! … |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.3.6 | Scalares2126PoEplusDaylightSavingTime | read-write | current | Get/Set the daylight saving time. Value range is between -5 and 5. Unit: hour. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.3.7 | Scalares2126PoEplusDaylightStartTime | read-write | current | Get/Set the Start time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. Example: month/day/hour 10/01… |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.3.8 | Scalares2126PoEplusDaylightEndTime | read-write | current | Get/Set the End time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. Example: month/day/hour 04/01/0… |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.4 | Nodees2126PoEplusAccount | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.1.4.1 | Scalares2126PoEplusAccountNumber | read-only | current | Get the current account number(s) of the system. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.4.2 | Tablees2126PoEplusAccountTable | not-accessible | current | This is a list of es2126PoEplusAccountEntry. The numbers of entries are given by the value of es2126PoEplusAccountNumber. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.4.2.1 | Rowes2126PoEplusAccountEntry | not-accessible | current | This is the Entry(s) for account information. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.4.2.1.1 | Columnes2126PoEplusAccountIndex | read-only | current | This is the index of the account entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.4.2.1.2 | Columnes2126PoEplusAccountAuthorization | read-only | current | This is the authorization of the account entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.4.2.1.3 | Columnes2126PoEplusAccountName | read-write | current | This is the username of the account entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.4.2.1.4 | Columnes2126PoEplusAccountPassword | read-write | current | This is the password of the account entry. The return value is always '********'. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.4.3 | Scalares2126PoEplusAccountAddName | read-write | current | This is the account name for adding operation. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.4.4 | Scalares2126PoEplusAccountAddPassword | read-write | current | This is the account password for adding operation. The return value is always '********'. |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.4.5 | Scalares2126PoEplusDoAccountAdd | read-write | current | Add account name. OID es2126PoEplusAccountAddName and es2126PoEplusAccountAddPassword must be filled first. Get this OID always return zero. 1 - Add account. 0… |
| 1.3.6.1.4.1.2356.800.2.2129.1.1.4.6 | Scalares2126PoEplusAccountDel | read-write | current | Delete account. The value is valid es2126PoEplusAccountIndex(Can't delete administrator). |
| 1.3.6.1.4.1.2356.800.2.2129.1.2 | Nodees2126PoEplusSnmp | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.2.1 | Scalares2126PoEplusGetCommunity | read-write | current | Get/Set the get-community of the SNMP. |
| 1.3.6.1.4.1.2356.800.2.2129.1.2.2 | Scalares2126PoEplusSetCommunity | read-write | current | Get/Set the set-community of the SNMP. |
| 1.3.6.1.4.1.2356.800.2.2129.1.2.3 | Scalares2126PoEplusTrapHostNumber | read-only | current | Get the number of trap hosts. |
| 1.3.6.1.4.1.2356.800.2.2129.1.2.4 | Tablees2126PoEplusTrapHostTable | not-accessible | current | This is a list of trap host entry. The numbers of entries are given by the value of es2126PoEplusTrapHostNumber. |
| 1.3.6.1.4.1.2356.800.2.2129.1.2.4.1 | Rowes2126PoEplusTrapHostEntry | not-accessible | current | This is the Entry Information for trap host. |
| 1.3.6.1.4.1.2356.800.2.2129.1.2.4.1.1 | Columnes2126PoEplusTrapHostIndex | read-only | current | The index of the trap host entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.2.4.1.2 | Columnes2126PoEplusTrapHostIP | read-write | current | This is the IP of the trap host. |
| 1.3.6.1.4.1.2356.800.2.2129.1.2.4.1.3 | Columnes2126PoEplusTrapHostPort | read-write | current | This is the receiving-port number of the trap host. |
| 1.3.6.1.4.1.2356.800.2.2129.1.2.4.1.4 | Columnes2126PoEplusTrapHostCommunity | read-write | current | The community name for the trap PDU. |
| 1.3.6.1.4.1.2356.800.2.2129.1.2.5 | Scalares2126PoEplusRegisterMonitor | read-write | current | Register-Monitor |
| 1.3.6.1.4.1.2356.800.2.2129.1.2.6 | Scalares2126PoEplusDeleteMonitor | read-write | current | Delete-Monitor |
| 1.3.6.1.4.1.2356.800.2.2129.1.2.7 | Tablees2126PoEplusMonitorTable | not-accessible | current | Monitor-Table |
| 1.3.6.1.4.1.2356.800.2.2129.1.2.7.1 | Rowes2126PoEplusMonitorEntry | not-accessible | current | entry in table |
| 1.3.6.1.4.1.2356.800.2.2129.1.2.7.1.1 | Columnes2126PoEplusMonitorTableIp | read-only | current | IP-Address |
| 1.3.6.1.4.1.2356.800.2.2129.1.2.7.1.2 | Columnes2126PoEplusMonitorTableMac | read-only | current | MAC-Address |
| 1.3.6.1.4.1.2356.800.2.2129.1.2.8 | Scalares2126PoEplusTrapBootDelayTime | read-write | current | Get/Set trap boot delay time in second. Default: 0 |
| 1.3.6.1.4.1.2356.800.2.2129.1.3 | Nodees2126PoEplusAlarm | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.3.1 | Nodees2126PoEplusEvent | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.3.1.1 | Scalares2126PoEplusEventNumber | read-only | current | Get the total number of alarm events. |
| 1.3.6.1.4.1.2356.800.2.2129.1.3.1.2 | Tablees2126PoEplusEventTable | not-accessible | current | This is a list of alarm event entry. The numbers of entries are given by the value of es2126PoEplusEventNumber. |
| 1.3.6.1.4.1.2356.800.2.2129.1.3.1.2.1 | Rowes2126PoEplusEventEntry | not-accessible | current | This is the entry information for alarm event. |
| 1.3.6.1.4.1.2356.800.2.2129.1.3.1.2.1.1 | Columnes2126PoEplusEventIndex | read-only | current | This is the index of the alarm event entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.3.1.2.1.2 | Columnes2126PoEplusEventName | read-only | current | This is the alarm event name. |
| 1.3.6.1.4.1.2356.800.2.2129.1.3.1.2.1.3 | Columnes2126PoEplusEventSendEmail | read-write | current | Send email when alarm event is triggered. |
| 1.3.6.1.4.1.2356.800.2.2129.1.3.1.2.1.4 | Columnes2126PoEplusEventSendTrap | read-write | current | Send trap when alarm event is triggered. |
| 1.3.6.1.4.1.2356.800.2.2129.1.3.2 | Nodees2126PoEplusEmail | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.3.2.1 | Scalares2126PoEplusEmailServer | read-write | current | This is the SMTP server for alarm event. |
| 1.3.6.1.4.1.2356.800.2.2129.1.3.2.2 | Scalares2126PoEplusEmailUsername | read-write | current | This is the Username of SMTP server. |
| 1.3.6.1.4.1.2356.800.2.2129.1.3.2.3 | Scalares2126PoEplusEmailPassword | read-write | current | This is the User Password of SMTP server. |
| 1.3.6.1.4.1.2356.800.2.2129.1.3.2.4 | Scalares2126PoEplusEmailSender | read-write | current | This is the Sender of SMTP server. |
| 1.3.6.1.4.1.2356.800.2.2129.1.3.2.5 | Scalares2126PoEplusEmailReturnPath | read-write | current | This is the return path of mail. |
| 1.3.6.1.4.1.2356.800.2.2129.1.3.2.6 | Scalares2126PoEplusEmailUserNumber | read-only | current | The number of the email users that you want to send the alarm notification. |
| 1.3.6.1.4.1.2356.800.2.2129.1.3.2.7 | Tablees2126PoEplusEmailUserTable | not-accessible | current | This is a list of email user entry. The numbers of entries are given by the value of es2126PoEplusEmailUserNumber. |
| 1.3.6.1.4.1.2356.800.2.2129.1.3.2.7.1 | Rowes2126PoEplusEmailUserEntry | not-accessible | current | This is the Entry information for email user entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.3.2.7.1.1 | Columnes2126PoEplusEmailUserIndex | read-only | current | This is the index of the email user entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.3.2.7.1.2 | Columnes2126PoEplusEmailUserAddress | read-write | current | This is the email address of the email user entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.4 | Nodees2126PoEplusTftp | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.4.1 | Scalares2126PoEplusRemoteTftpServer | read-write | current | Get/Set the remote tftp server. |
| 1.3.6.1.4.1.2356.800.2.2129.1.4.2 | Scalares2126PoEplusInternalTftpServerState | read-write | current | Get/Set internal tftp server state. 0 : Disable 1 : Enable |
| 1.3.6.1.4.1.2356.800.2.2129.1.5 | Nodees2126PoEplusConfiguration | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.5.1 | Nodees2126PoEplusSaveRestore | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.5.1.1 | Scalares2126PoEplusSaveStart | read-write | current | Save current configuration into flash memory (Save as Start Configuration). Get this OID always return zero. 1 - Save. 0 - do nothing. |
| 1.3.6.1.4.1.2356.800.2.2129.1.5.1.2 | Scalares2126PoEplusSaveUser | read-write | current | Save current configuration into flash memory (Save as User Configuration). Get this OID always return zero. 1 - Save. 0 - do nothing. |
| 1.3.6.1.4.1.2356.800.2.2129.1.5.1.3 | Scalares2126PoEplusRestoreDefault | read-write | current | Restore factory default configuration. Get this OID always return zero. 2 - Restore default included default ip address. 1 - Restore default without changing c… |
| 1.3.6.1.4.1.2356.800.2.2129.1.5.1.4 | Scalares2126PoEplusRestoreUser | read-write | current | Restore user configuration. Get this OID always return zero. 1 - Restore. 0 - do nothing. |
| 1.3.6.1.4.1.2356.800.2.2129.1.5.2 | Nodees2126PoEplusConfigFile | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.5.2.1 | Scalares2126PoEplusExportConfigName | read-write | current | Get/Set the export file path and name. |
| 1.3.6.1.4.1.2356.800.2.2129.1.5.2.2 | Scalares2126PoEplusDoExportConfig | read-write | current | Do export-config. Get this OID always return zero. 1 - Export start section. 2 - Export user-conf section. |
| 1.3.6.1.4.1.2356.800.2.2129.1.5.2.3 | Scalares2126PoEplusImportConfigName | read-write | current | Get/Set the import file path and name. |
| 1.3.6.1.4.1.2356.800.2.2129.1.5.2.4 | Scalares2126PoEplusDoImportConfig | read-write | current | Do import-config. Get this OID always return zero. 1 - Import start section. 2 - Import user-conf section. 3 - Import start and overwrite current ip. |
| 1.3.6.1.4.1.2356.800.2.2129.1.6 | Nodees2126PoEplusDiagnostic | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.6.1 | Scalares2126PoEplusEEPROMTest | read-only | current | EEPROM access test. |
| 1.3.6.1.4.1.2356.800.2.2129.1.6.2 | Scalares2126PoEplusUartTest | read-only | current | UART access test. |
| 1.3.6.1.4.1.2356.800.2.2129.1.6.3 | Scalares2126PoEplusDramTest | read-only | current | DRAM access test. |
| 1.3.6.1.4.1.2356.800.2.2129.1.6.4 | Scalares2126PoEplusFlashTest | read-only | current | Flash memory access test. |
| 1.3.6.1.4.1.2356.800.2.2129.1.6.5 | Scalares2126PoEplusInternalLoopbackTest | read-only | current | Internal loop back test. |
| 1.3.6.1.4.1.2356.800.2.2129.1.6.6 | Scalares2126PoEplusExternalLoopbackTest | read-only | current | External loop back test. |
| 1.3.6.1.4.1.2356.800.2.2129.1.6.7 | Scalares2126PoEplusPingTest | read-write | current | Set the host address that you want to ping and the system will return the test result. |
| 1.3.6.1.4.1.2356.800.2.2129.1.7 | Nodees2126PoEplusLog | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.7.1 | Scalares2126PoEplusClearLog | read-write | current | Clear system log. Get this OID always return zero. 1 - Clear log. 0 - do nothing. |
| 1.3.6.1.4.1.2356.800.2.2129.1.7.2 | Scalares2126PoEplusUploadLog | read-write | current | Upload current system log. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return zero.… |
| 1.3.6.1.4.1.2356.800.2.2129.1.7.3 | Scalares2126PoEplusAutoUploadLogState | read-write | current | Enable auto-upload log function. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return… |
| 1.3.6.1.4.1.2356.800.2.2129.1.7.4 | Scalares2126PoEplusLogNumber | read-only | current | Get the number of current system log. |
| 1.3.6.1.4.1.2356.800.2.2129.1.7.5 | Tablees2126PoEplusLogTable | not-accessible | current | This is a list of log entry. The numbers of entries are given by the value of es2126PoEplusLogNumber. |
| 1.3.6.1.4.1.2356.800.2.2129.1.7.5.1 | Rowes2126PoEplusLogEntry | not-accessible | current | This is the Entry information for system log. |
| 1.3.6.1.4.1.2356.800.2.2129.1.7.5.1.1 | Columnes2126PoEplusLogIndex | read-only | current | This is the index of the log entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.7.5.1.2 | Columnes2126PoEplusLogEvent | read-only | current | This is the detail information of the log entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.8 | Nodees2126PoEplusFirmware | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.8.1 | Scalares2126PoEplusFirmwareFileName | read-write | current | Get/Set the path and filename for firmware upgrading. |
| 1.3.6.1.4.1.2356.800.2.2129.1.8.2 | Scalares2126PoEplusDoFirmwareUpgrade | read-write | current | Do firmware upgrade. Get this OID always return zero. 1 - Do firmware upgrade. 0 - do nothing. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9 | Nodees2126PoEplusPort | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.9.1 | Nodees2126PoEplusPortStatus | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.9.1.1 | Scalares2126PoEplusPortStatusNumber | read-only | current | Get the number of port. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.1.2 | Tablees2126PoEplusPortStatusTable | not-accessible | current | This is a list of port status entry. The numbers of entries are given by the value of es2126PoEplusPortStatusNumber. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.1.2.1 | Rowes2126PoEplusPortStatusEntry | not-accessible | current | This is the entry(s) for port status information. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.1.2.1.1 | Columnes2126PoEplusPortStatusIndex | read-only | current | This is the index of the port status entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.1.2.1.2 | Columnes2126PoEplusPortStatusMedia | read-only | current | The port media type of the port status entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.1.2.1.3 | Columnes2126PoEplusPortStatusLink | read-only | current | This is the port link of the port status entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.1.2.1.4 | Columnes2126PoEplusPortStatusPortState | read-only | current | This is the port state of the port status entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.1.2.1.5 | Columnes2126PoEplusPortStatusAutoNego | read-only | current | This is the auto negotiation of the port status entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.1.2.1.6 | Columnes2126PoEplusPortStatusSpdDpx | read-only | current | This is the speed/duplex of the port status entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.1.2.1.7 | Columnes2126PoEplusPortStatusRxPause | read-only | current | The Rx Pause of the port status entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.1.2.1.8 | Columnes2126PoEplusPortStatusTxPause | read-only | current | The Tx Pause of the port status entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.1.2.1.9 | Columnes2126PoEplusPortStatusDescription | read-only | current | This is the description of port. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.2 | Nodees2126PoEplusPortConf | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.9.2.1 | Scalares2126PoEplusPortConfNumber | read-only | current | Get the number of port configuration. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.2.2 | Tablees2126PoEplusPortConfTable | not-accessible | current | This is a list of port configuration entry. The numbers of entries are given by the value of es2126PoEplusPortConfNumber. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.2.2.1 | Rowes2126PoEplusPortConfEntry | not-accessible | current | This is the Entry(s) for port configuration information. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.2.2.1.1 | Columnes2126PoEplusPortConfIndex | read-only | current | This is the index of the port configuration entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.2.2.1.2 | Columnes2126PoEplusPortConfPortState | read-write | current | This is the port state of the port configuration entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.2.2.1.3 | Columnes2126PoEplusPortConfSpdDpx | read-write | current | This is the speed/duplex of the port configuration entry. 0 - auto. 1 - 10M/Half. 2 - 10M/Full. 3 - 100M/Half. 4 - 100M/Full. 5 - 1G/Full. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.2.2.1.4 | Columnes2126PoEplusPortConfFlwCtrl | read-write | current | This is the flow control of the port configuration entry. 0 - asymmetric. 1 - symmetric. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.2.2.1.5 | Columnes2126PoEplusPortConfDescription | read-write | current | This is the description of port. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.3 | Nodees2126PoEplusPortBandwidth | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.9.3.1 | Tablees2126PoEplusPortBandwidthTable | not-accessible | current | This is a list of port bandwidth entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.3.1.1 | Rowes2126PoEplusPortBandwidthEntry | not-accessible | current | This is the Entry(s) for port bandwidth configuration. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.3.1.1.1 | Columnes2126PoEplusPortBandwidthIndex | read-only | current | This is the index of the port bandwidth entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.3.1.1.2 | Columnes2126PoEplusPortBandwidthIngressRate | read-write | current | Get/Set the port bandwidth ingress rate. Fast Ethernet port range: 66~102400(Kb) Gigabit Ethernet port range: 66~1024000(Kb) |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.3.1.1.3 | Columnes2126PoEplusPortBandwidthEgressRate | read-write | current | Get/Set the port bandwidth egress rate. Fast Ethernet port range: 66~102400(Kb) Gigabit Ethernet port range: 66~1024000(Kb) |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.3.2 | Scalares2126PoEplusPortBandwidthStormType | read-write | current | This is the bandwidth storm type. 0:Disable 1:Broadcast Storm Control 2:Multicast Storm Control 3:Unknown Unicast Storm Control 4:Broadcast, Multicast, and Unk… |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.3.3 | Scalares2126PoEplusPortBandwidthStormRate | read-write | current | This is the storm rate. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.4 | Nodees2126PoEplusPortSFPInfo | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.9.4.1 | Scalares2126PoEplusPortSFPInfoNumber | read-only | current | Get the number of sfp info entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.4.2 | Tablees2126PoEplusPortSFPInfoTable | not-accessible | current | A list of sfp info entry. The numbers of entries are given by the value of es2126PoEplusPortSFPInfoNumber. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.4.2.1 | Rowes2126PoEplusPortSFPInfoEntry | not-accessible | current | Entry(s) for SFP information. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.4.2.1.1 | Columnes2126PoEplusPortSFPInfoIndex | read-only | current | The index of the sfp info entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.4.2.1.2 | Columnes2126PoEplusPortSFPConnectorType | read-only | current | Get connector type of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.4.2.1.3 | Columnes2126PoEplusPortSFPFiberType | read-only | current | Get fiber type of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.4.2.1.4 | Columnes2126PoEplusPortSFPWavelength | read-only | current | Get tx central wavelength of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.4.2.1.5 | Columnes2126PoEplusPortSFPBaudRate | read-only | current | Get baud rate of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.4.2.1.6 | Columnes2126PoEplusPortSFPVendorOUI | read-only | current | Get vendor OUI of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.4.2.1.7 | Columnes2126PoEplusPortSFPVendorName | read-only | current | Get vendor name of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.4.2.1.8 | Columnes2126PoEplusPortSFPVendorPN | read-only | current | Get vendor part number of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.4.2.1.9 | Columnes2126PoEplusPortSFPVendorRev | read-only | current | Get vendor revision number of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.4.2.1.10 | Columnes2126PoEplusPortSFPVendorSN | read-only | current | Get vendor serial number of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.4.2.1.11 | Columnes2126PoEplusPortSFPDateCode | read-only | current | Get data code of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.4.2.1.12 | Columnes2126PoEplusPortSFPTemperature | read-only | current | Get current temperature of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.4.2.1.13 | Columnes2126PoEplusPortSFPVcc | read-only | current | Get current internal supply voltage of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.4.2.1.14 | Columnes2126PoEplusPortSFPTxBias | read-only | current | Get current TX Bias of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.4.2.1.15 | Columnes2126PoEplusPortSFPTxPWR | read-only | current | Get current TX output power of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2129.1.9.4.2.1.16 | Columnes2126PoEplusPortSFPRxPWR | read-only | current | Get current Received Power of the sfp. |
| 1.3.6.1.4.1.2356.800.2.2129.1.10 | Nodees2126PoEplusLoopDetectedConf | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.10.1 | Scalares2126PoEplusLoopDetectedNumber | read-only | current | Get the number of loop detected entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.10.2 | Tablees2126PoEplusLoopDetectedTable | not-accessible | current | This is a list of loop detected entry. The number of entries are given by the value of es2126PoEplusLoopDetectedNumber. |
| 1.3.6.1.4.1.2356.800.2.2129.1.10.2.1 | Rowes2126PoEplusLoopDetectedEntry | not-accessible | current | Entry(s) for loop detected information. |
| 1.3.6.1.4.1.2356.800.2.2129.1.10.2.1.1 | Columnes2126PoEplusLoopDetectedfIndex | read-only | current | This is the index of the loop detected entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.10.2.1.2 | Columnes2126PoEplusLoopDetectedStateEbl | read-write | current | The state of the loop detected entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.2356.800.2.2129.1.10.2.1.3 | Columnes2126PoEplusLoopDetectedCurrentStatus | read-only | current | The current status of the loop detected port. 0 - Unlocked 1 - Locked due to the loop condition |
| 1.3.6.1.4.1.2356.800.2.2129.1.10.2.1.4 | Columnes2126PoEplusLoopDetectedResumed | read-write | current | Unlock the port which is locked due to loop condition. Get this OID always return zero. 1 - Unlock the port, 0 - do nothing. |
| 1.3.6.1.4.1.2356.800.2.2129.1.10.3 | Scalares2126PoEplusLoopDetectedAction | read-write | current | Set the corresponding action while loop is detected. 1 - Lock the loop port, 0 - do nothing. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11 | Nodees2126PoEplusMacTableInfo | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.11.1 | Nodees2126PoEplusMacTableMaintenance | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.11.1.1 | Scalares2126PoEplusMacTableAgingTime | read-write | current | Set the Mac Table Aging Time (10~1000000 Secs). 0 : Disable. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.1.2 | Scalares2126PoEplusMacTableFlush | read-write | current | 1 : Flush Mac Table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.1.3 | Tablees2126PoEplusMacTableLearnPortLimitTable | not-accessible | current | This is a list of MAC Learning Limitentry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.1.3.1 | Rowes2126PoEplusMacTableLearnPortLimitEntry | not-accessible | current | Entry(s) for Mac Table Port Learning Limit. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.1.3.1.1 | Columnes2126PoEplusMacTableLearnPortLimitIndex | not-accessible | current | The index of the Mac Table Learning Limit entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.1.3.1.2 | Columnes2126PoEplusMacTableLearnPortLimit | read-write | current | Port Learning Limit (0~8191). |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.3 | Nodees2126PoEplusMacTableStaticMac | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.11.3.1 | Scalares2126PoEplusMacTableStaticMacNumber | read-only | current | This is number of static Mac table entry |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.3.2 | Scalares2126PoEplusMacTableStaticMacEntryCreate | read-write | current | Creat a static mac entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.3.3 | Tablees2126PoEplusMacTableStaticMacTable | not-accessible | current | This is a list of static MAC table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.3.3.1 | Rowes2126PoEplusMacTableStaticMacEntry | not-accessible | current | Entry(s) for Static Mac Table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.3.3.1.1 | Columnes2126PoEplusMacTableStaticMacIndex | not-accessible | current | The index of the static Mac Table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.3.3.1.2 | Columnes2126PoEplusMacTableStaticMacAddress | read-write | current | The mac address of the static mac table entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.3.3.1.3 | Columnes2126PoEplusMacTableStaticMacVid | read-write | current | The vlan id of the static mac table entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.3.3.1.4 | Columnes2126PoEplusMacTableStaticMacQueue | read-write | current | The queue of the static mac table entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.3.3.1.5 | Columnes2126PoEplusMacTableStaticMacFwRule | read-write | current | The forwarding rule of the static mac table entry. 0 : static 1 : Static with Destination Drop 2 : Static with Source Drop |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.3.3.1.6 | Columnes2126PoEplusMacTableStaticMacPort | read-write | current | The port of the static mac table entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.3.3.1.7 | Columnes2126PoEplusMacTableStaticMacEntryAction | read-write | current | The port of the static mac table entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.4 | Nodees2126PoEplusMacTableMacAlias | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.11.4.1 | Scalares2126PoEplusMacTableMacAliasNumber | read-only | current | This is number of static Mac table entry |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.4.2 | Scalares2126PoEplusMacTableMacAliasEntryCreate | read-write | current | Creat a static mac alias entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.4.3 | Tablees2126PoEplusMacTableMacAliasTable | not-accessible | current | This is a list of MAC Alias table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.4.3.1 | Rowes2126PoEplusMacTableMacAliasEntry | not-accessible | current | Entry(s) for Alias Mac Table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.4.3.1.1 | Columnes2126PoEplusMacTableMacAliasIndex | not-accessible | current | The index of the Alias Mac Table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.4.3.1.2 | Columnes2126PoEplusMacTableMacAliasAddress | read-write | current | The Mac address of the Alias Mac Table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.4.3.1.3 | Columnes2126PoEplusMacTableMacAliasAlias | read-write | current | The Mac Alias of the Alias Mac Table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.11.4.3.1.4 | Columnes2126PoEplusMacTableMacAliasEntryAction | read-write | current | The action of the alias mac table entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12 | Nodees2126PoEplusGVRPInfo | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.12.1 | Nodees2126PoEplusGvrpConf | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.12.1.1 | Scalares2126PoEplusGvrpConfState | read-write | current | The state of GVRP. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.1.2 | Tablees2126PoEplusGvrpConfTable | not-accessible | current | This is a list of the GVRP conf table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.1.2.1 | Rowes2126PoEplusGvrpConfEntry | not-accessible | current | Entry(s) for the GVRP conf table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.1.2.1.1 | Columnes2126PoEplusGvrpConfIndex | not-accessible | current | The index of the GVRP conf table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.1.2.1.2 | Columnes2126PoEplusGvrpConfJoinTime | read-write | current | The join time of the GVRP entry. range: 20~100 default 20 centisecond |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.1.2.1.3 | Columnes2126PoEplusGvrpConfLeaveTime | read-write | current | The leave time of the GVRP entry. range: 60~300 default:60 centisecond |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.1.2.1.4 | Columnes2126PoEplusGvrpConfLeaveAllTime | read-write | current | The leave all time of the GVRP entry. range: 1000~5000 default: 1000 unit time |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.1.2.1.5 | Columnes2126PoEplusGvrpConfDefaultAppMode | read-write | current | The default application mode of the GVRP entry. 0 - Normal 1 - Non-Participant default: Normal |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.1.2.1.6 | Columnes2126PoEplusGvrpConfDefaultRegMode | read-write | current | The default registrar mode of the GVRP entry. 0 - Normal 1 - Fixed 2 - Forbidden default: Normal |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.1.2.1.7 | Columnes2126PoEplusGvrpConfRestrictedMode | read-write | current | The restricted mode of the GVRP entry. 0 - Disable 1 - Enable default: Disable |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.2 | Nodees2126PoEplusGvrpCounter | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.12.2.1 | Tablees2126PoEplusGvrpCounterTable | not-accessible | current | This is a list of the GVRP counter table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.2.1.1 | Rowes2126PoEplusGvrpCounterEntry | not-accessible | current | Entry(s) for the GVRP counter table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.2.1.1.1 | Columnes2126PoEplusGvrpCounterIndex | not-accessible | current | The port index of the GVRP counter table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.2.1.1.2 | Columnes2126PoEplusGvrpCounterRxTotalGvrpPkts | read-only | current | This is Rx Total GVRP packet counters. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.2.1.1.3 | Columnes2126PoEplusGvrpCounterRxInvalidGvrpPkts | read-only | current | This is Rx Invalid GVRP packet counters. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.2.1.1.4 | Columnes2126PoEplusGvrpCounterRxLeaveAllMsg | read-only | current | This is Rx LeaveAll message packet counters. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.2.1.1.5 | Columnes2126PoEplusGvrpCounterRxJoinEmptyMsg | read-only | current | This is Rx JoinEmpty message packet counters. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.2.1.1.6 | Columnes2126PoEplusGvrpCounterRxJoinInMsg | read-only | current | This is Rx JoinIn message packet counters. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.2.1.1.7 | Columnes2126PoEplusGvrpCounterRxLeaveEmptyMsg | read-only | current | This is Rx LeaveEmpty message packet counters. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.2.1.1.8 | Columnes2126PoEplusGvrpCounterRxEmptyMsg | read-only | current | This is Rx Empty message packet counters. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.2.1.1.9 | Columnes2126PoEplusGvrpCounterTxTotalGvrpPkts | read-only | current | This is Tx Total GVRP packet counters. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.2.1.1.10 | Columnes2126PoEplusGvrpCounterTxLeaveAllMsg | read-only | current | This is Tx LeaveAll message packet counters. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.2.1.1.11 | Columnes2126PoEplusGvrpCounterTxJoinEmptyMsg | read-only | current | This is Tx JoinEmpty message packet counters. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.2.1.1.12 | Columnes2126PoEplusGvrpCounterTxJoinInMsg | read-only | current | This is Tx JoinIn message packet counters. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.2.1.1.13 | Columnes2126PoEplusGvrpCounterTxLeaveEmptyMsg | read-only | current | This is Tx LeaveEmpty message packet counters. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.2.1.1.14 | Columnes2126PoEplusGvrpCounterTxEmptyMsg | read-only | current | This is Tx Empty message packet counters. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.3 | Nodees2126PoEplusGvrpGroup | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.12.3.1 | Scalares2126PoEplusGvrpGroupNumber | read-only | current | This is number of the GVRP group table entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.3.2 | Tablees2126PoEplusGvrpGroupTable | not-accessible | current | This is a list of the GVRP group table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.3.2.1 | Rowes2126PoEplusGvrpGroupEntry | not-accessible | current | Entry(s) for the GVRP group table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.3.2.1.1 | Columnes2126PoEplusGvrpGroupId | read-only | current | The index of the GVRP group table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.3.2.1.2 | Columnes2126PoEplusGvrpGroupVid | read-only | current | This is vid of GVRP group. |
| 1.3.6.1.4.1.2356.800.2.2129.1.12.3.2.1.3 | Columnes2126PoEplusGvrpGroupMemberPort | read-only | current | This is the member port of GVRP group. |
| 1.3.6.1.4.1.2356.800.2.2129.1.13 | Nodees2126PoEplusSecurity | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.13.1 | Scalares2126PoEplusIsolatedPortGroup | read-write | current | This is isolated group. 0: Disable |
| 1.3.6.1.4.1.2356.800.2.2129.1.13.2 | Nodees2126PoEplusMirror | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.13.2.1 | Scalares2126PoEplusMirrorMode | read-write | current | This is mirror mode. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.2356.800.2.2129.1.13.2.2 | Scalares2126PoEplusMonitoringPort | read-write | current | This is monitoring port. |
| 1.3.6.1.4.1.2356.800.2.2129.1.13.2.3 | Scalares2126PoEplusMonitoredIngressPort | read-write | current | This is monitored ingress ports. |
| 1.3.6.1.4.1.2356.800.2.2129.1.13.2.4 | Scalares2126PoEplusMonitoredEgressPort | read-write | current | This is monitored egress ports. |
| 1.3.6.1.4.1.2356.800.2.2129.1.13.3 | Nodees2126PoEplusRestrictedGroup | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.13.3.1 | Scalares2126PoEplusRestrictedGroupIngress | read-write | current | This is the ingress port members of restricted group. |
| 1.3.6.1.4.1.2356.800.2.2129.1.13.3.2 | Scalares2126PoEplusRestrictedGroupEgress | read-write | current | This is the egress port members of restricted group. |
| 1.3.6.1.4.1.2356.800.2.2129.1.14 | Nodees2126PoEplusVirtualStack | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.14.1 | Scalares2126PoEplusVirtualStackState | read-write | current | Set the Virtual Stack State. 0 : disable, 1 : enable |
| 1.3.6.1.4.1.2356.800.2.2129.1.14.2 | Scalares2126PoEplusVirtualStackRole | read-write | current | Set the Virtual Stack Role. 0 : slave, 1 : master |
| 1.3.6.1.4.1.2356.800.2.2129.1.14.3 | Scalares2126PoEplusVirtualStackGroupID | read-write | current | Set the Virtual Stack Group ID. |
| 1.3.6.1.4.1.2356.800.2.2129.1.15 | Nodees2126PoEplusManagementSecurity | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.15.1 | Scalares2126PoEplusManagementSecurityNumber | read-only | current | This is number of the management security table entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.15.2 | Scalares2126PoEplusManagementSecurityEntryCreate | read-write | current | Creat a management security entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.15.3 | Tablees2126PoEplusManagementSecurityTable | not-accessible | current | This is a list of the management security table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.15.3.1 | Rowes2126PoEplusManagementSecurityEntry | not-accessible | current | Entry(s) for the management security table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.15.3.1.1 | Columnes2126PoEplusManagementSecurityIndex | not-accessible | current | The index of the management security table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.15.3.1.2 | Columnes2126PoEplusManagementSecurityName | read-write | current | The name of the management security entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.15.3.1.3 | Columnes2126PoEplusManagementSecurityVid | read-write | current | This is the vid of the management security entry. 0: any VID. |
| 1.3.6.1.4.1.2356.800.2.2129.1.15.3.1.4 | Columnes2126PoEplusManagementSecurityIpRange | read-write | current | This is the IP range of the management security entry. 0: any IP. |
| 1.3.6.1.4.1.2356.800.2.2129.1.15.3.1.5 | Columnes2126PoEplusManagementSecurityIncomigPort | read-write | current | This is the ports of the management security entry. 0: any incoming port. |
| 1.3.6.1.4.1.2356.800.2.2129.1.15.3.1.6 | Columnes2126PoEplusManagementSecurityAccessType | read-write | current | This is the access type of the management security entry. 0: http, telnet, and SNMP. |
| 1.3.6.1.4.1.2356.800.2.2129.1.15.3.1.7 | Columnes2126PoEplusManagementSecurityAction | read-write | current | This is the action of the management security entry. 0:deny 1:accept |
| 1.3.6.1.4.1.2356.800.2.2129.1.15.3.1.8 | Columnes2126PoEplusManagementSecurityEntryAction | read-write | current | The action the management security entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16 | Nodees2126PoEplusQoS | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.16.1 | Nodees2126PoEplusQoSGlobalConfig | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.16.1.1 | Scalares2126PoEplusQoSMode | read-write | current | The mode of QoS. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.1.2 | Scalares2126PoEplusQosPriorityControl1p | read-write | current | This is the priority control for 802.1p. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.1.3 | Scalares2126PoEplusQosPriorityControlTOS | read-write | current | This is the priority control for TOS. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.1.4 | Scalares2126PoEplusQosPriorityControlDSCP | read-write | current | This is the priority control for DSCP. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.1.5 | Scalares2126PoEplusQoSSchedulingMethod | read-write | current | This is the scheduling method. 0 - WRR 1 - Strict |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.1.6 | Scalares2126PoEplusQoSWeightQ0 | read-write | current | This is the weigtht of Queue0. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.1.7 | Scalares2126PoEplusQoSWeightQ1 | read-write | current | This is the weigtht of Queue1. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.1.8 | Scalares2126PoEplusQoSWeightQ2 | read-write | current | This is the weigtht of Queue2. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.1.9 | Scalares2126PoEplusQoSWeightQ3 | read-write | current | This is the weigtht of Queue3. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.2 | Scalares2126PoEplusQoSVIPPort | read-write | current | This is the VIP group for QoS. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.3 | Nodees2126PoEplusQoS1pPriority | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.16.3.1 | Tablees2126PoEplusQoS1pPriorityTable | not-accessible | current | This is a list of the 802.1p. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.3.1.1 | Rowes2126PoEplusQoS1pPriorityEntry | not-accessible | current | Entry(s) for the 802.1p priority table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.3.1.1.1 | Columnes2126PoEplusQoS1pPriorityIndex | not-accessible | current | The index of the 802.1p priority table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.3.1.1.2 | Columnes2126PoEplusQoS1pPriorityValue | read-only | current | The value of 802.1p priority entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.3.1.1.3 | Columnes2126PoEplusQoS1pPriorityQueue | read-write | current | The queue of 802.1p priority entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.4 | Nodees2126PoEplusQoSDTypeTOSPriority | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.16.4.1 | Tablees2126PoEplusQoSDTypeTOSPriorityTable | not-accessible | current | This is a list of the TOS delay priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.4.1.1 | Rowes2126PoEplusQoSDTypeTOSPriorityEntry | not-accessible | current | Entry(s) for the ToS delay priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.4.1.1.1 | Columnes2126PoEplusQoSDTypeTOSPriorityIndex | not-accessible | current | The index of the ToS delay priority mapping table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.4.1.1.2 | Columnes2126PoEplusQoSDTypeTOSPriorityValue | read-only | current | The value of ToS delay priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.4.1.1.3 | Columnes2126PoEplusQoSDTypeTOSPriorityQueue | read-write | current | The queue of ToS delay priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.5 | Nodees2126PoEplusQoSTTypeTOSPriority | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.16.5.1 | Tablees2126PoEplusQoSTTypeTOSPriorityTable | not-accessible | current | This is a list of the ToS throughput priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.5.1.1 | Rowes2126PoEplusQoSTTypeTOSPriorityEntry | not-accessible | current | Entry(s) for the TOS Throughput mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.5.1.1.1 | Columnes2126PoEplusQoSTTypeTOSPriorityIndex | not-accessible | current | The index of the TOS throughput priority mapping table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.5.1.1.2 | Columnes2126PoEplusQoSTTypeTOSPriorityValue | read-only | current | The value of TOS throughput priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.5.1.1.3 | Columnes2126PoEplusQoSTTypeTOSPriorityQueue | read-write | current | The queue of TOS throughput priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.6 | Nodees2126PoEplusQoSRTypeTOSPriority | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.16.6.1 | Tablees2126PoEplusQoSRTypeTOSPriorityTable | not-accessible | current | This is a list of the ToS reliability priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.6.1.1 | Rowes2126PoEplusQoSRTypeTOSPriorityEntry | not-accessible | current | Entry(s) for the TOS reliability mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.6.1.1.1 | Columnes2126PoEplusQoSRTypeTOSPriorityIndex | not-accessible | current | The index of the TOS reliability priority mapping table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.6.1.1.2 | Columnes2126PoEplusQoSRTypeTOSPriorityValue | read-only | current | The value of TOS reliability priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.6.1.1.3 | Columnes2126PoEplusQoSRTypeTOSPriorityQueue | read-write | current | The queue of TOS reliability priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.7 | Nodees2126PoEplusQoSMTypeTOSPriority | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.16.7.1 | Tablees2126PoEplusQoSMTypeTOSPriorityTable | not-accessible | current | This is a list of the ToS monetary cost priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.7.1.1 | Rowes2126PoEplusQoSMTypeTOSPriorityEntry | not-accessible | current | Entry(s) for the TOS monetary cost mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.7.1.1.1 | Columnes2126PoEplusQoSMTypeTOSPriorityIndex | not-accessible | current | The index of the TOS monetary cost priority mapping table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.7.1.1.2 | Columnes2126PoEplusQoSMTypeTOSPriorityValue | read-only | current | The value of TOS monetary cost priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.7.1.1.3 | Columnes2126PoEplusQoSMTypeTOSPriorityQueue | read-write | current | The queue of TOS monetary cost priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.8 | Nodees2126PoEplusQoSDSCPPriority | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.16.8.1 | Tablees2126PoEplusQoSDSCPPriorityTable | not-accessible | current | This is a list of the DSCP priority entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.8.1.1 | Rowes2126PoEplusQoSDSCPPriorityEntry | not-accessible | current | Entry(s) for the DSCP priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.8.1.1.1 | Columnes2126PoEplusQoSDSCPPriorityIndex | not-accessible | current | The index of the DSCP priority priority mapping table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.8.1.1.2 | Columnes2126PoEplusQoSDSCPPriorityValue | read-only | current | The value of DSCP priority priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.16.8.1.1.3 | Columnes2126PoEplusQoSDSCPPriorityQueue | read-write | current | The queue of DSCP priority priority mapping entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.17 | Nodees2126PoEplusVlan | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.17.1 | Nodees2126PoEplusVlanModeConfig | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.17.1.1 | Scalares2126PoEplusVlanMode | read-write | current | 0:Tag-based, 1:Port-based, 2:Metro mode |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.1.2 | Scalares2126PoEplusSymmetricVlan | read-write | current | Symmetric VLAN: for tag-based 0:disable, 1:enable |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.1.3 | Scalares2126PoEplusVlanSVL | read-write | current | SVL: : for tag-based 0:disable, 1:enable |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.1.4 | Scalares2126PoEplusDoubleTag | read-write | current | Double Tag: for tag-based 0:disable, 1:enable |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.1.5 | Scalares2126PoEplusUpLinkPort | read-write | current | Up link Port: for Metro mode 0:Port 25, 1:Port 26, 2:Port 25 & 26 |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.2 | Nodees2126PoEplusTagBasedVlanGroup | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.17.2.1 | Scalares2126PoEplusTagBasedVlanNumbers | read-only | current | Total numbers for tag-based vlan. |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.2.2 | Scalares2126PoEplusTagBasedCreateStatus | read-write | current | Creat a temp vlan in tag-based vlan table. 0 : none, 1~4094 : creat with this vid. |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.2.3 | Tablees2126PoEplusTagBasedVlanTable | not-accessible | current | |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.2.3.1 | Rowes2126PoEplusTagBasedVlanEntry | not-accessible | current | Entry(s) for tag-based vlan table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.2.3.1.1 | Columnes2126PoEplusTagBasedVlanVid | not-accessible | current | The vid of vlan. |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.2.3.1.2 | Columnes2126PoEplusTagBasedVlanName | read-write | current | The name of vlan. |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.2.3.1.3 | Columnes2126PoEplusTagBasedVlanMember | read-write | current | The member of vlan. |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.2.3.1.4 | Columnes2126PoEplusTagBasedVlanUntag | read-write | current | The untag port of vlan. |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.2.3.1.5 | Columnes2126PoEplusTagBasedVlanRowStatus | read-write | current | The row status of vlan. 1 : active, 2 : not-inService, 3 : delete |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.3 | Nodees2126PoEplusVlanPvid | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.17.3.1 | Tablees2126PoEplusVlanPvidTable | not-accessible | current | |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.3.1.1 | Rowes2126PoEplusVlanPvidEntry | not-accessible | current | Entry(s) for Vlan Pvid. |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.3.1.1.1 | Columnes2126PoEplusVlanPvidPort | not-accessible | current | The port number of pvid entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.3.1.1.2 | Columnes2126PoEplusVlanPvidValue | read-write | current | The pvid value of port. |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.3.1.1.3 | Columnes2126PoEplusVlanPvidDefaultPriority | read-write | current | The default priority of port . |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.3.1.1.4 | Columnes2126PoEplusVlanPvidDropUntag | read-write | current | The drop untag of port . |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.4 | Nodees2126PoEplusPortBasedVlanGroup | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.17.4.1 | Scalares2126PoEplusPortBasedVlanNumbers | read-only | current | Total numbers for tag-based vlan. |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.4.2 | Scalares2126PoEplusPortBasedCreateStatus | read-write | current | Creat a temp vlan in port-based vlan table. 0 : none, 1 : creat a new port-based vlan. |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.4.3 | Tablees2126PoEplusPortBasedVlanTable | not-accessible | current | |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.4.3.1 | Rowes2126PoEplusPortBasedVlanEntry | not-accessible | current | Entry(s) for port-based vlan table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.4.3.1.1 | Columnes2126PoEplusPortBasedVlanIndex | not-accessible | current | The index of vlan. |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.4.3.1.2 | Columnes2126PoEplusPortBasedVlanName | read-write | current | The name of vlan. |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.4.3.1.3 | Columnes2126PoEplusPortBasedVlanMember | read-write | current | The member of vlan. |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.4.3.1.4 | Columnes2126PoEplusPortBasedVlanRowStatus | read-write | current | The row status of vlan. 1 : active, 2 : not-inService, 3 : delete |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.5 | Nodees2126PoEplusManagementVlan | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.17.5.1 | Scalares2126PoEplusManagementVlanState | read-write | current | The stat of management vlan. (for tag-base) 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.2356.800.2.2129.1.17.5.2 | Scalares2126PoEplusManagementVlanVid | read-write | current | The vid value of management vlan. |
| 1.3.6.1.4.1.2356.800.2.2129.1.18 | Nodees2126PoEplusDot1X | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.18.1 | Nodees2126PoEplusDot1XStateSetting | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.18.1.1 | Scalares2126PoEplusRadiusServer | read-write | current | Set radius server ip |
| 1.3.6.1.4.1.2356.800.2.2129.1.18.1.2 | Scalares2126PoEplusDot1XPort | read-write | current | Set 802.1X port number |
| 1.3.6.1.4.1.2356.800.2.2129.1.18.1.3 | Scalares2126PoEplusSecretKey | read-write | current | Set 802.1X secret key |
| 1.3.6.1.4.1.2356.800.2.2129.1.18.1.4 | Scalares2126PoEplusAccountingService | read-write | current | Set 802.1X accounting service 0 : disable 1 : enable |
| 1.3.6.1.4.1.2356.800.2.2129.1.18.1.5 | Scalares2126PoEplusAccountingServer | read-write | current | Set 802.1X accounting server |
| 1.3.6.1.4.1.2356.800.2.2129.1.18.1.6 | Scalares2126PoEplusAccountingPort | read-write | current | Set 802.1X accounting port number |
| 1.3.6.1.4.1.2356.800.2.2129.1.18.2 | Nodees2126PoEplusDot1XPortSecurityManagement | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.18.2.1 | Tablees2126PoEplusDot1XPortSecurityTable | not-accessible | current | This is a list of the 802.1x port security entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.18.2.1.1 | Rowes2126PoEplusDot1XPortSecurityEntry | not-accessible | current | Entry(s) for 802.1x port security management table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.18.2.1.1.1 | Columnes2126PoEplusDot1XPortSecurityPortIndex | not-accessible | current | The port index of 802.1x port security. |
| 1.3.6.1.4.1.2356.800.2.2129.1.18.2.1.1.2 | Columnes2126PoEplusDot1XPortSecurityMode | read-write | current | The mode of 802.1x port security. 0 : Disable, 1 : Normal, 2 : Advanced 802.1X |
| 1.3.6.1.4.1.2356.800.2.2129.1.18.2.1.1.3 | Columnes2126PoEplusDot1XPortSecurityPortControl | read-write | current | The port control of 802.1x port security. 0 : ForceUnauthorized, 1 : ForceAuthorized, 2 : Auto |
| 1.3.6.1.4.1.2356.800.2.2129.1.18.2.1.1.4 | Columnes2126PoEplusDot1XPortSecurityReAuthMax | read-write | current | The reAuthMax(1~10) of 802.1x port security. |
| 1.3.6.1.4.1.2356.800.2.2129.1.18.2.1.1.5 | Columnes2126PoEplusDot1XPortSecurityTxPeriod | read-write | current | The txPeriod(1~65535) of 802.1x port security. |
| 1.3.6.1.4.1.2356.800.2.2129.1.18.2.1.1.6 | Columnes2126PoEplusDot1XPortSecurityQuietPeriod | read-write | current | The quiet period(0~65535) of 802.1x port security. |
| 1.3.6.1.4.1.2356.800.2.2129.1.18.2.1.1.7 | Columnes2126PoEplusDot1XPortSecurityReAuthEnabled | read-write | current | The reAuthEnabled of 802.1x port security. 0 : off, 1 : on. |
| 1.3.6.1.4.1.2356.800.2.2129.1.18.2.1.1.8 | Columnes2126PoEplusDot1XPortSecurityReAuthPeriod | read-write | current | The reAuthPeriod(1~65535) of 802.1x port security. |
| 1.3.6.1.4.1.2356.800.2.2129.1.18.2.1.1.9 | Columnes2126PoEplusDot1XPortSecurityMaxRequest | read-write | current | The max.request(1~10) of 802.1x port security. |
| 1.3.6.1.4.1.2356.800.2.2129.1.18.2.1.1.10 | Columnes2126PoEplusDot1XPortSecuritySuppTimeout | read-write | current | The suppTimeout(1~65535) of 802.1x port security. |
| 1.3.6.1.4.1.2356.800.2.2129.1.18.2.1.1.11 | Columnes2126PoEplusDot1XPortSecurityServerTimeout | read-write | current | The server timeout(1~65535) of 802.1x port security. |
| 1.3.6.1.4.1.2356.800.2.2129.1.18.2.1.1.12 | Columnes2126PoEplusDot1XPortSecurityStatus | read-only | current | The status of 802.1x port security. |
| 1.3.6.1.4.1.2356.800.2.2129.1.19 | Nodees2126PoEplusTrunkInfo | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.19.1 | Nodees2126PoEplusTrunkPort | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.19.1.1 | Tablees2126PoEplusTrunkPortTable | not-accessible | current | |
| 1.3.6.1.4.1.2356.800.2.2129.1.19.1.1.1 | Rowes2126PoEplusTrunkPortEntry | not-accessible | current | Entry(s) for trunk table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.19.1.1.1.1 | Columnes2126PoEplusTrunkPortIndex | not-accessible | current | The port index of trunk table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.19.1.1.1.2 | Columnes2126PoEplusTrunkPortMethod | read-write | current | The method of trunk port. 0 : None, 1 : LACP, 2 : Static. |
| 1.3.6.1.4.1.2356.800.2.2129.1.19.1.1.1.3 | Columnes2126PoEplusTrunkPortGroup | read-write | current | The group(0~3) of trunk port. |
| 1.3.6.1.4.1.2356.800.2.2129.1.19.1.1.1.4 | Columnes2126PoEplusTrunkPortActiveLacp | read-write | current | The active lacp mode of trunk port. 0 : Passive, 1 : Active. |
| 1.3.6.1.4.1.2356.800.2.2129.1.19.1.1.1.5 | Columnes2126PoEplusTrunkPortAggtr | read-only | current | The Aggtr of trunk port. |
| 1.3.6.1.4.1.2356.800.2.2129.1.19.1.1.1.6 | Columnes2126PoEplusTrunkPortStatus | read-only | current | The status of trunk port. 0 : None, 1 : Ready. |
| 1.3.6.1.4.1.2356.800.2.2129.1.19.1.1.1.7 | Columnes2126PoEplusTrunkPortCurrentMode | read-write | current | The current mode of trunk port entry. 0 : Active mode, 1 : Edit mode, 2 : Do edit. |
| 1.3.6.1.4.1.2356.800.2.2129.1.19.2 | Nodees2126PoEplusAggregatorView | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.19.2.1 | Tablees2126PoEplusAggregatorViewTable | not-accessible | current | |
| 1.3.6.1.4.1.2356.800.2.2129.1.19.2.1.1 | Rowes2126PoEplusAggregatorViewEntry | not-accessible | current | Entry(s) for aggregator view table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.19.2.1.1.1 | Columnes2126PoEplusAggregatorViewIndex | not-accessible | current | The port index of aggregator view table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.19.2.1.1.2 | Columnes2126PoEplusAggregatorViewMethod | read-only | current | The method of aggregator view table. 0 : None, 1 : LACP, 2 : Static. |
| 1.3.6.1.4.1.2356.800.2.2129.1.19.2.1.1.3 | Columnes2126PoEplusAggregatorViewMemberPorts | read-only | current | The member ports of aggregator view table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.19.2.1.1.4 | Columnes2126PoEplusAggregatorViewReadyPorts | read-only | current | The ready ports of aggregator view table. |
| 1.3.6.1.4.1.2356.800.2.2129.1.19.3 | Nodees2126PoEplusLacpSystemConfiguration | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.19.3.1 | Scalares2126PoEplusLacpSystemPriority | read-write | current | The priority of LACP system. |
| 1.3.6.1.4.1.2356.800.2.2129.1.19.3.2 | Scalares2126PoEplusLacpSystemHashMethod | read-write | current | The hash method of LACP system. 0 : DA and SA 1 : SA 2 : DA |
| 1.3.6.1.4.1.2356.800.2.2129.1.20 | Nodees2126PoEplusTrapEntry | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.20.1 | Notificationes2126PoEplusModuleInserted | current | Send the trap when a module is inserted to the system. The OID value means the port number. | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.2 | Notificationes2126PoEplusModuleRemoved | current | Send the trap when a module is removed from the system. The OID value means the port number. | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.3 | Notificationes2126PoEplusDualMediaSwapped | current | Send the trap when the dual media port changed. The OID value means the port number. | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.4 | Notificationes2126PoEplusPoEFailure | current | Send the trap while detecting the malfunction of PoE chips. | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.5 | Notificationes2126PoEplusLoopDetected | current | Send the trap when loop condition has been detected. The OID value means the port number. | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.6 | Notificationes2126PoEplusLoginProtected | current | Send the trap when login protect has been detected. | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.100 | Notificationes2126PoEplusStpStateDisabled | current | Send the trap when the operational state of STP is from enabled to disabled. | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.101 | Notificationes2126PoEplusStpStateEnabled | current | Send the trap when the operational state of STP is from disabled to enabled. | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.102 | Notificationes2126PoEplusStpTopologyChanged | current | Send the trap when RSTP determines a port should enter the FORWARDING state (a topology change occurs). The OID value is the ifIndex of the port that produces … | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.110 | Notificationes2126PoEplusRmonRisingAlarm | current | Send the trap when an RMON rising alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that exceeds its own Risin… | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.111 | Notificationes2126PoEplusRmonFallingAlarm | current | Send the trap when an RMON falling alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that is smaller than its … | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.120 | Notificationes2126PoEplusLacpStateDisabled | current | Send the trap when the operational state of LACP is from enabled to disabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.121 | Notificationes2126PoEplusLacpStateEnabled | current | Send the trap when the operational state of LACP is from disabled to enabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.123 | Notificationes2126PoEplusLacpPortAdded | current | Send the trap when the state of port is in 'trunk ready'. | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.124 | Notificationes2126PoEplusLacpPortTrunkFailure | current | Send the trap when one port is not able to be aggregated due to duplex-mode of the port. | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.140 | Notificationes2126PoEplusGvrpStateDisabled | current | Send the trap when the operational state of GVRP is from enabled to disabled. | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.141 | Notificationes2126PoEplusGvrpStateEnabled | current | Send the trap when the operational state of LACP is from disabled to enabled. | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.151 | Notificationes2126PoEplusVlanPortBaseEnabled | current | Send the trap when the operational state of vlan is changed to port-based vlan. | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.152 | Notificationes2126PoEplusVlanTagBaseEnabled | current | Send the trap when the operational state of vlan is changed to tag-based vlan. | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.153 | Notificationes2126PoEplusVlanMetroBaseEnabled | current | Send this trap when the operational state of vlan is changed to metro-based vlan. | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.200 | Notificationes2126PoEplusUserLogin | current | Send the trap when one user logins the system. | |
| 1.3.6.1.4.1.2356.800.2.2129.1.20.201 | Notificationes2126PoEplusUserLogout | current | Send the trap when one user logouts the system. | |
| 1.3.6.1.4.1.2356.800.2.2129.1.21 | Nodees2126PoEplusTrapVariable | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.21.1 | Scalarusername | read-only | current | System account name. |
| 1.3.6.1.4.1.2356.800.2.2129.1.21.2 | ScalargroupId | read-only | current | The Trunk group ID of LACP. |
| 1.3.6.1.4.1.2356.800.2.2129.1.21.3 | Scalaractorkey | read-only | current | The actor key information for LACP. |
| 1.3.6.1.4.1.2356.800.2.2129.1.21.4 | Scalarpartnerkey | read-only | current | The partner key information for LACP. |
| 1.3.6.1.4.1.2356.800.2.2129.1.21.5 | Scalaruplink | read-only | current | Uplink port(s) in the metro-mode vlan. |
| 1.3.6.1.4.1.2356.800.2.2129.1.21.6 | ScalarloginProtectInfo | read-only | current | Loging protect information. |
| 1.3.6.1.4.1.2356.800.2.2129.1.22 | Nodees2126PoEplusPoE | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.22.1 | Nodees2126PoEplusPoEStatus | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.22.1.1 | Scalares2126PoEplusPoEStatusVmain | read-only | current | Current PoE Voltage status |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.1.2 | Scalares2126PoEplusPoEStatusImain | read-only | current | Current PoE Current status |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.1.3 | Scalares2126PoEplusPoEStatusPconsume | read-only | current | Current PoE consuming power status |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.1.4 | Scalares2126PoEplusPoEStatusPowerLimit | read-only | current | Current PoE power limit status |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.1.5 | Scalares2126PoEplusPoEStatusTemperature | read-only | current | Current PoE temperature status |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.1.6 | Tablees2126PoEplusPoEStatusTable | not-accessible | current | A list of PoE Status entry. The number of entries are given by Ports. |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.1.6.1 | Rowes2126PoEplusPoEStatusEntry | not-accessible | current | Entry(s) for PoE Status. |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.1.6.1.1 | Columnes2126PoEplusPoEStatusPortNum | not-accessible | current | The index(Port number) of the PoE status entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.1.6.1.2 | Columnes2126PoEplusPoEStatusPortOn | read-only | current | PD on this port is on. |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.1.6.1.3 | Columnes2126PoEplusPoEStatusACPortOff | read-only | current | Possitive value means PSE has been supplied power and is no supplying now, while zero means PSE has never supplied power or is supplying now. |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.1.6.1.4 | Columnes2126PoEplusPoEStatusDCPortOff | read-only | current | PD on this port is DC off. |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.1.6.1.5 | Columnes2126PoEplusPoEStatusOverloadPortOff | read-only | current | Possitive value means PSE status overloaded now. Zero means PSE is not overloaded. |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.1.6.1.6 | Columnes2126PoEplusPoEStatusShortCircuitPortOff | read-only | current | PD on this port is short circuit off. |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.1.6.1.7 | Columnes2126PoEplusPoEStatusOverTemperature | read-only | current | PD on this port is over temperature. |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.1.6.1.8 | Columnes2126PoEplusPoEStatusPowerManagePortOff | read-only | current | PD on this port is powered off by management. |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.2 | Tablees2126PoEplusPoEConfTable | not-accessible | current | A list of PoE Configuration entry. The number of entries are given by Ports. |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.2.1 | Rowes2126PoEplusPoEConfEntry | not-accessible | current | Entry(s) for PoE Configuration. |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.2.1.1 | Columnes2126PoEplusPoEConfPortNum | not-accessible | current | The index(Port number) of the PoE Configuration entry. |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.2.1.2 | Columnes2126PoEplusPoEConfStatus | read-only | current | 0:Normal ; 1:Active |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.2.1.3 | Columnes2126PoEplusPoEConfState | read-write | current | 0:Disable ; 1:Enable |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.2.1.4 | Columnes2126PoEplusPoEConfPriority | read-write | current | 0:Low ; 1:Normal ; 2:High |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.2.1.5 | Columnes2126PoEplusPoEConfPower | read-only | current | The power provides for the PD. |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.2.1.6 | Columnes2126PoEplusPoEConfCurrent | read-only | current | The current provides for the PD. |
| 1.3.6.1.4.1.2356.800.2.2129.1.22.2.1.7 | Columnes2126PoEplusPoEConfClass | read-only | current | The class of the PD. |
| 1.3.6.1.4.1.2356.800.2.2129.1.23 | Nodees2126PoEplusLoginProtect | |||
| 1.3.6.1.4.1.2356.800.2.2129.1.23.1 | Scalares2126PoEplusLockMinutes | read-write | current | Set the login lock time. Available from 0 to 10 (minutes) Set 0 as disabled. |
| 1.3.6.1.4.1.2356.800.2.2129.1.23.2 | Scalares2126PoEplusLoginErrors | read-write | current | Set login error count. Available from 0 to 10 (times) Set 0 as disabled. |