MIB Viewer

LANCOM-GS-2328F-MIB

1680 objects
The MIB module is for LANCOM Systems
Imported Objects
BRIDGE-MIBMacAddress
INET-ADDRESS-MIBInetAddress
RFC1213-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Counter64 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCDisplayString
OIDNameAccessStatusDescription
1.3.6.1.4.1.2356Identitylancom-systemsThe MIB module is for LANCOM Systems
1.3.6.1.4.1.2356.800NodeswitchingSystems
1.3.6.1.4.1.2356.800.3NodegigabitEthernetSwitches
1.3.6.1.4.1.2356.800.3.2332NodelancomGS2328F
1.3.6.1.4.1.2356.800.3.2332.1Nodegs2328fSystem
1.3.6.1.4.1.2356.800.3.2332.1.1Nodegs2328fSystemInformation
1.3.6.1.4.1.2356.800.3.2332.1.1.1Scalargs2328fModelNameread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.2Scalargs2328fBIOSVersionread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.3Scalargs2328fFirmwareVersionread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.4Scalargs2328fHardwareMechanicalVersionread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.5Scalargs2328fSerialNumberread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.6Scalargs2328fHostMACAddressread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.7Scalargs2328fConsoleBaudrateread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.8Scalargs2328fRAMSizeread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.9Scalargs2328fFlashSizeread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.10Scalargs2328fBridgeFDBSizeread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.11Scalargs2328fTransmitQueueread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.12Scalargs2328fMaximumFrameSizeread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.13Scalargs2328fCPULoadread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.17Scalargs2328fFanSpeedread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.18Scalargs2328fACPowerread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.19Scalargs2328fTemperatureread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.20Scalargs2328fDCPowerread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.21Scalargs2328fSystemDescriptionread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.22Scalargs2328fLocationread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.23Scalargs2328fContactread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.24Scalargs2328fDeviceNameread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.25Scalargs2328fSystemDateread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.26Scalargs2328fSystemUptimeread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.27Scalargs2328fSystemIPv4Addressread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.28Scalargs2328fSystemIPv4SubnetMaskread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.29Scalargs2328fSystemIPv4Gatewayread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.30Scalargs2328fIPv6LinkLocalAddressread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.31Scalargs2328fIPv6Addressread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.32Scalargs2328fIPv6Prefixread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.33Scalargs2328fIPv6Gatewayread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.1.1500Scalargs2328fLargestFreeMemBlockread-onlycurrentLargest free memory block in Kb
1.3.6.1.4.1.2356.800.3.2332.1.1.1501Scalargs2328fMemFreeread-onlycurrentFree memory in Kb
1.3.6.1.4.1.2356.800.3.2332.1.2Nodegs2328fSystemTime
1.3.6.1.4.1.2356.800.3.2332.1.2.1Nodegs2328fSystemTimeManual
1.3.6.1.4.1.2356.800.3.2332.1.2.1.1Scalargs2328fSystemTimeManualClockSourceread-writecurrentdefault: 0, 0 : Use Local Settings, 1 : Use NTP Server.
1.3.6.1.4.1.2356.800.3.2332.1.2.1.2Scalargs2328fSystemTimeManualLocaltimeread-writecurrentGet/Set the system time of the device. The input format is 'Year-Month-Day Hour:Minute:Second'. ex: 2011-01-01 05:43:05 means 2011/1/1 - 05:43:05 . The value r…
1.3.6.1.4.1.2356.800.3.2332.1.2.1.3Scalargs2328fSystemTimeManualTimeZoneOffsetread-writecurrentGet/Set the NTP Time Zone. The value range is between -720 and 780 (minutes).
1.3.6.1.4.1.2356.800.3.2332.1.2.1.4Scalargs2328fSystemTimeManualDaylightSavingsread-writecurrentdefault: 0, 0 : Disable, 1 : Enable.
1.3.6.1.4.1.2356.800.3.2332.1.2.1.5Scalargs2328fSystemTimeManualTimeSetOffsetread-writecurrentGet/Set the Daylight Saving Time. The value range is between 1 and 1440 (minutes), Default : 60 (minutes).
1.3.6.1.4.1.2356.800.3.2332.1.2.1.6Scalargs2328fSystemTimeManualDaylightSavingsTyperead-writecurrentdefault: 0, 0 : By dates, 1 : Recurring.
1.3.6.1.4.1.2356.800.3.2332.1.2.1.7Scalargs2328fSystemTimeManualDaylightSavingsBydatesFromread-writecurrentGet/Set the Start time of By dates Daylight Savings. The input format is 'Year-Month-Day Hour:Minute'. ex: 2011-01-01 05:43 means 2011/1/1 - 05:43 . The value …
1.3.6.1.4.1.2356.800.3.2332.1.2.1.8Scalargs2328fSystemTimeManualDaylightSavingsBydatesToread-writecurrentGet/Set the End time of By dates Daylight Savings. The input format is 'Year-Month-Day Hour:Minute'. ex: 2011-01-01 05:43 means 2011/1/1 - 05:43 . The value ra…
1.3.6.1.4.1.2356.800.3.2332.1.2.1.9Scalargs2328fSystemTimeManualDaylightSavingsRecurringDayFromread-writecurrentGet/Set the Daylight Saving Time Day From. 0 : Sun, 1 : Mon, 2 : Tue, 3 : Wed, 4 : Thu, 5 : Fri, 6 : Sat.
1.3.6.1.4.1.2356.800.3.2332.1.2.1.10Scalargs2328fSystemTimeManualDaylightSavingsRecurringWeekFromread-writecurrentGet/Set the Daylight Saving Time Week From. 1 : first week, 2, 3, 4, 5 : last week
1.3.6.1.4.1.2356.800.3.2332.1.2.1.11Scalargs2328fSystemTimeManualDaylightSavingsRecurringMonthFromread-writecurrentGet/Set the Daylight Saving Time Month From. 1 : Jan, 2 : Feb, 3 : Mar, 4 : Apr, 5 : May, 6 : Jun, 7 : Jul, 8 : Aug, 9 : Sep, 10 : Oct, 11 : Nov, 12 : Dec.
1.3.6.1.4.1.2356.800.3.2332.1.2.1.12Scalargs2328fSystemTimeManualDaylightSavingsRecurringTimeFromread-writecurrentGet/Set the Start time of By dates Daylight Savings. The input format is 'Hour:Minute'. ex: 05:43. The value range: Hour : 0 - 23, Minute : 0 - 59.
1.3.6.1.4.1.2356.800.3.2332.1.2.1.13Scalargs2328fSystemTimeManualDaylightSavingsRecurringDayToread-writecurrentGet/Set the Daylight Saving Time Day To. 0 : Sun, 1 : Mon, 2 : Tue, 3 : Wed, 4 : Thu, 5 : Fri, 6 : Sat.
1.3.6.1.4.1.2356.800.3.2332.1.2.1.14Scalargs2328fSystemTimeManualDaylightSavingsRecurringWeekToread-writecurrentGet/Set the Daylight Saving Time Week To. 1 : first week, 2, 3, 4, 5 : last week
1.3.6.1.4.1.2356.800.3.2332.1.2.1.15Scalargs2328fSystemTimeManualDaylightSavingsRecurringMonthToread-writecurrentGet/Set the Daylight Saving Time Month To. 1 : Jan, 2 : Feb, 3 : Mar, 4 : Apr, 5 : May, 6 : Jun, 7 : Jul, 8 : Aug, 9 : Sep, 10 : Oct, 11 : Nov, 12 : Dec.
1.3.6.1.4.1.2356.800.3.2332.1.2.1.16Scalargs2328fSystemTimeManualDaylightSavingsRecurringTimeToread-writecurrentGet/Set the Start time of By dates Daylight Savings. The input format is 'Hour:Minute'. ex: 05:43. The value range: Hour : 0 - 23, Minute : 0 - 59.
1.3.6.1.4.1.2356.800.3.2332.1.2.2Nodegs2328fSystemTimeNTP
1.3.6.1.4.1.2356.800.3.2332.1.2.2.1Tablegs2328fSystemTimeNTPTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.1.2.2.1.1Rowgs2328fSystemTimeNTPEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.1.2.2.1.1.1Columngs2328fSystemTimeNTPIndexnot-accessiblecurrentThe index of the ntp entry.
1.3.6.1.4.1.2356.800.3.2332.1.2.2.1.1.2Columngs2328fSystemTimeNTPServerIPTyperead-writecurrentDefault: 0, 0 : IPv4, 1 : IPv6.
1.3.6.1.4.1.2356.800.3.2332.1.2.2.1.1.3Columngs2328fSystemTimeNTPServerread-writecurrentGet/Set the NTP Time Server1. You can use the IP address or domain name.
1.3.6.1.4.1.2356.800.3.2332.1.2.2.1.1.4Columngs2328fSystemTimeNTPCurrentModeread-writecurrent0: Empty 1: Active 2: Edit 3: Delete
1.3.6.1.4.1.2356.800.3.2332.1.2.2.2Scalargs2328fSystemTimeNTPRequestIntervalread-writecurrentGet/Set the NTP Request Interval. Default : 86400. The value range is between 60 and 999999999 (seconds).
1.3.6.1.4.1.2356.800.3.2332.1.2.2.3Scalargs2328fSystemTimeNTPTriesNumberread-writecurrentGet/Set the NTP Number of tries. Default : 4. The value range is between 0 and 999999999.
1.3.6.1.4.1.2356.800.3.2332.1.3Nodegs2328fSystemAccount
1.3.6.1.4.1.2356.800.3.2332.1.3.1Nodegs2328fSystemAccountUsers
1.3.6.1.4.1.2356.800.3.2332.1.3.1.1Scalargs2328fSystemAccountUserCreateread-writecurrentdefault: 0 0 : None (read only) 1 : Create a user account
1.3.6.1.4.1.2356.800.3.2332.1.3.1.2Tablegs2328fSystemAccountUsersTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.1.3.1.2.1Rowgs2328fSystemAccountUsersEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.1.3.1.2.1.1Columngs2328fUserIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.1.3.1.2.1.2Columngs2328fUserNameread-writecurrentPlease use a combination of letters, numbers and underscores
1.3.6.1.4.1.2356.800.3.2332.1.3.1.2.1.3Columngs2328fPasswordread-writecurrentPlease use ASCII printable code except Quotation mark, Colon (punctuation), Less-than sign, Greater-than sign, At sign, Question mark and Space (punctuation)
1.3.6.1.4.1.2356.800.3.2332.1.3.1.2.1.4Columngs2328fUserPrivilegeLevelread-writecurrentdefault:1 User privilege level range : 1 - 15
1.3.6.1.4.1.2356.800.3.2332.1.3.1.2.1.5Columngs2328fAccountUserRowStatusread-writecurrent1: active 2: notInservice 3: edit 4: destroy 5: undo
1.3.6.1.4.1.2356.800.3.2332.1.3.1.1500Scalargs2328fSystemAccountUsersSuperUserPasswordread-writecurrentSuper-User Password
1.3.6.1.4.1.2356.800.3.2332.1.3.1.1501Scalargs2328fSystemAccountEnforcePasswordRulesread-writecurrentdefault: 0 0 : Do not enforce rules 1 : enforce rules
1.3.6.1.4.1.2356.800.3.2332.1.3.2Nodegs2328fSystemAccountPrivilegeLevel
1.3.6.1.4.1.2356.800.3.2332.1.3.2.1Scalargs2328fAccountPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.2Scalargs2328fAggregationPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.3Scalargs2328fDiagnosticsPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.4Scalargs2328fEEEPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.9Scalargs2328fEasyportPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.10Scalargs2328fGARPPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.11Scalargs2328fGVRPPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.12Scalargs2328fIPPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.13Scalargs2328fIPMCSnoopingPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.14Scalargs2328fLACPPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.15Scalargs2328fLLDPPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.16Scalargs2328fLLDPMEDPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.17Scalargs2328fLoopProtectPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.18Scalargs2328fMACTablePrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.22Scalargs2328fMVRPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.24Scalargs2328fMaintenancePrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.25Scalargs2328fMirroringPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.27Scalargs2328fPortsPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.28Scalargs2328fPrivateVLANsPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.29Scalargs2328fQoSPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.30Scalargs2328fSFlowPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.31Scalargs2328fSMTPPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.32Scalargs2328fSNMPPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.33Scalargs2328fSecurityPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.34Scalargs2328fSingleIPPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.35Scalargs2328fSpanningTreePrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.36Scalargs2328fSystemPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.37Scalargs2328fTrapEventPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.38Scalargs2328fUPnPPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.39Scalargs2328fVCLPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.41Scalargs2328fVLANsPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.3.2.42Scalargs2328fVoiceVLANPrivilegeLevelread-writecurrentDefault:15, Range : 1-15.
1.3.6.1.4.1.2356.800.3.2332.1.4Nodegs2328fIP
1.3.6.1.4.1.2356.800.3.2332.1.4.1Nodegs2328fIPv4
1.3.6.1.4.1.2356.800.3.2332.1.4.1.1Nodegs2328fIPv4Configured
1.3.6.1.4.1.2356.800.3.2332.1.4.1.1.1Scalargs2328fIpv4DHCPClientread-writecurrentdefault:0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.1.4.1.1.2Scalargs2328fIPv4Addressread-writecurrent
1.3.6.1.4.1.2356.800.3.2332.1.4.1.1.3Scalargs2328fIPv4Maskread-writecurrent
1.3.6.1.4.1.2356.800.3.2332.1.4.1.1.4Scalargs2328fIPv4Gatewayread-writecurrent
1.3.6.1.4.1.2356.800.3.2332.1.4.1.1.5Scalargs2328fIPv4VLANIdread-writecurrentdefault:1
1.3.6.1.4.1.2356.800.3.2332.1.4.1.1.6Scalargs2328fIPv4DNSServerread-writecurrent
1.3.6.1.4.1.2356.800.3.2332.1.4.1.1.7Scalargs2328fIPv4DNSProxyread-writecurrent0:disable, 1:enable
1.3.6.1.4.1.2356.800.3.2332.1.4.1.2Nodegs2328fIPv4Current
1.3.6.1.4.1.2356.800.3.2332.1.4.1.2.1Scalargs2328fIpv4CurrentDHCPClientread-writecurrentdefault:0 0: none (for read) 1: renew
1.3.6.1.4.1.2356.800.3.2332.1.4.1.2.2Scalargs2328fIPv4CurrentAddressread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.4.1.2.3Scalargs2328fIPv4CurrentMaskread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.4.1.2.4Scalargs2328fIPv4CurrentGatewayread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.4.1.2.5Scalargs2328fIPv4CurrentVLANIdread-onlycurrentdefault:1
1.3.6.1.4.1.2356.800.3.2332.1.4.1.2.6Scalargs2328fIPv4CurrentDNSServerread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.4.2Nodegs2328fIPv6
1.3.6.1.4.1.2356.800.3.2332.1.4.2.1Nodegs2328fIPv6Configured
1.3.6.1.4.1.2356.800.3.2332.1.4.2.1.1Scalargs2328fIpv6AutoConfigurationread-writecurrentdefault:0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.1.4.2.1.2Scalargs2328fIpv6Addressread-writecurrent
1.3.6.1.4.1.2356.800.3.2332.1.4.2.1.3Scalargs2328fIpv6Prefixread-writecurrentdefault: 96
1.3.6.1.4.1.2356.800.3.2332.1.4.2.1.4Scalargs2328fIpv6Gatewayread-writecurrent
1.3.6.1.4.1.2356.800.3.2332.1.4.2.2Nodegs2328fIPv6Current
1.3.6.1.4.1.2356.800.3.2332.1.4.2.2.1Scalargs2328fIpv6CurrentAutoConfigurationread-onlycurrentdefault:0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.1.4.2.2.2Scalargs2328fIpv6CurrentAddressread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.4.2.2.3Scalargs2328fIpv6CurrentLinkLocalAddressread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.4.2.2.4Scalargs2328fIpv6CurrentPrefixread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.4.2.2.5Scalargs2328fIpv6CurrentGatewayread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.5Nodegs2328fSyslog
1.3.6.1.4.1.2356.800.3.2332.1.5.1Nodegs2328fSyslogConf
1.3.6.1.4.1.2356.800.3.2332.1.5.1.1Scalargs2328fServerModeread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.1.5.1.2Scalargs2328fServerAddress1read-writecurrent
1.3.6.1.4.1.2356.800.3.2332.1.5.1.3Scalargs2328fServerAddress2read-writecurrent
1.3.6.1.4.1.2356.800.3.2332.1.5.1.4Scalargs2328fSyslogLevelread-writecurrentdefault: 6 (Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.1.5.2Nodegs2328fSyslogDetailedInfo
1.3.6.1.4.1.2356.800.3.2332.1.5.2.1Scalargs2328fSyslogDetailedInfoClearread-writecurrentdefault: 0 0 : None (read only) 1 : Clear Syslog
1.3.6.1.4.1.2356.800.3.2332.1.5.2.2Tablegs2328fSyslogDetailedInfoTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.1.5.2.2.1Rowgs2328fSyslogDetailedInfoEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.1.5.2.2.1.1Columngs2328fSyslogDetailedInfoIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.1.5.2.2.1.2Columngs2328fSyslogDetailedInfoLevelread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.5.2.2.1.3Columngs2328fSyslogDetailedInfoTimeread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.5.2.2.1.4Columngs2328fSyslogDetailedInfoMessageread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.1.6Nodegs2328fSnmp
1.3.6.1.4.1.2356.800.3.2332.1.6.1Nodegs2328fSnmpConf
1.3.6.1.4.1.2356.800.3.2332.1.6.1.1Scalargs2328fGetCommunityModeread-writecurrentGet/Set the get-community mode of the SNMP. default : 1, 0: disable, 1: enable.
1.3.6.1.4.1.2356.800.3.2332.1.6.1.2Scalargs2328fGetCommunityread-writecurrentGet/Set the get-community of the SNMP.
1.3.6.1.4.1.2356.800.3.2332.1.6.1.3Scalargs2328fSetCommunityModeread-writecurrentGet/Set the set-community mode of the SNMP. default : 1, 0: disable, 1: enable.
1.3.6.1.4.1.2356.800.3.2332.1.6.1.4Scalargs2328fSetCommunityread-writecurrentGet/Set the set-community of the SNMP.
1.3.6.1.4.1.2356.800.3.2332.1.6.1.5Tablegs2328fGetCommunityConfTablenot-accessiblecurrentShow get-community of the SNMP.
1.3.6.1.4.1.2356.800.3.2332.1.6.1.5.1Rowgs2328fGetCommunityConfEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.1.6.1.5.1.1Columngs2328fCommunityConfIndexnot-accessiblecurrentindex, range : 1 - 5.
1.3.6.1.4.1.2356.800.3.2332.1.6.1.5.1.2Columngs2328fCommunityConfGetCommunityread-writecurrentGet/Set the get-community of the SNMP.
1.3.6.1.4.1.2356.800.3.2332.1.6.1.6Tablegs2328fTrapHostConfTablenot-accessiblecurrentA list of trap host entry. The numbers of entries are given by the value of gs2328fTrapHostConfNumber.
1.3.6.1.4.1.2356.800.3.2332.1.6.1.6.1Rowgs2328fTrapHostConfEntrynot-accessiblecurrentThis is the entry information for trap host.
1.3.6.1.4.1.2356.800.3.2332.1.6.1.6.1.1Columngs2328fTrapHostConfIndexnot-accessiblecurrentThe index of the trap host entry.
1.3.6.1.4.1.2356.800.3.2332.1.6.1.6.1.2Columngs2328fTrapHostConfVersionread-writecurrentThe version of the Trap PDU. Version : 2(SNMPv2c), 3(SNMPv3)
1.3.6.1.4.1.2356.800.3.2332.1.6.1.6.1.3Columngs2328fTrapHostConfIPTyperead-writecurrentServer IP Type. Default: 4, 4 : IPv4, 6 : IPv6.
1.3.6.1.4.1.2356.800.3.2332.1.6.1.6.1.4Columngs2328fTrapHostConfIPread-writecurrentThis is the IP of the trap host.
1.3.6.1.4.1.2356.800.3.2332.1.6.1.6.1.5Columngs2328fTrapHostConfPortread-writecurrentThis is the receiving-port number of the trap host. range : 1 - 65535.
1.3.6.1.4.1.2356.800.3.2332.1.6.1.6.1.6Columngs2328fTrapHostConfCommunityread-writecurrentThe community/security name for the trap PDU.
1.3.6.1.4.1.2356.800.3.2332.1.6.1.6.1.7Columngs2328fTrapHostConfSeverityLevelread-writecurrentThe Severity Level. 0 : Emerg, 1 : Alert, 2 : Critical, 3 : Error, 4 : Warning, 5 : Notice, 6 : Info, 7 : Debug.
1.3.6.1.4.1.2356.800.3.2332.1.6.1.6.1.8Columngs2328fTrapHostConfSecurityLevelread-writecurrentThe Security Level, NoAuthNoPriv, AuthNoPriv, and AuthPriv. 1 : NoAuthNoPriv, 2 : AuthNoPriv, 3 : AuthPriv. Privacy protocol will be configured as 'DES' automa…
1.3.6.1.4.1.2356.800.3.2332.1.6.1.6.1.9Columngs2328fTrapHostConfAuthPtcread-writecurrentAuthentication Protocol, there are SHA and MD5 supported presently. 1 : MD5, 2 : SHA.
1.3.6.1.4.1.2356.800.3.2332.1.6.1.6.1.10Columngs2328fTrapHostConfAuthPasswordread-writecurrentAuthentication Password, is used for authenticating. The return value is always '********'. If the authentication protocol is MD5, the length of password shoul…
1.3.6.1.4.1.2356.800.3.2332.1.6.1.6.1.11Columngs2328fTrapHostConfPrivPtcread-writecurrentThis is the Privacy Protocol, which is used in AuthPriv. Only supports DES. An empty string will be returned if the security level is not 3(AuthPriv). 1 : DES.
1.3.6.1.4.1.2356.800.3.2332.1.6.1.6.1.12Columngs2328fTrapHostConfPrivPasswordread-writecurrentThe password is Privacy Key. The return value is always '********'. This Key must be more than 8 characters, and less than 32 characters.
1.3.6.1.4.1.2356.800.3.2332.1.6.1.6.1.13Columngs2328fTrapHostConfCurrentModeread-writecurrent0:Empty, 1:Active mode, 2:Edit mode, 3:Delete.
1.3.6.1.4.1.2356.800.3.2332.1.6.2Nodegs2328fSnmpSystem
1.3.6.1.4.1.2356.800.3.2332.1.6.2.1Scalargs2328fSnmpStateread-writecurrentGet/Set the state of the SNMP. default : 1, 0: disable, 1: enable.
1.3.6.1.4.1.2356.800.3.2332.1.6.2.2Scalargs2328fSnmpEngineIDread-writecurrentGet/Set the Engine ID of the SNMP. An SNMP engine's administratively-unique identifier.
1.3.6.1.4.1.2356.800.3.2332.1.6.3Nodegs2328fSnmpCommunities
1.3.6.1.4.1.2356.800.3.2332.1.6.3.1Scalargs2328fSnmpCommunitiesCreateread-writecurrentdefault: 0 0 : None (read only) 1 : Create entry
1.3.6.1.4.1.2356.800.3.2332.1.6.3.2Tablegs2328fSnmpCommunitiesTablenot-accessiblecurrentCreate SNMPv1/v2 Communities entry.
1.3.6.1.4.1.2356.800.3.2332.1.6.3.2.1Rowgs2328fSnmpCommunitiesEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.1.6.3.2.1.1Columngs2328fSnmpCommunitiesIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.1.6.3.2.1.2Columngs2328fSnmpCommunitiesCommunityread-writecurrentUp to 32 characters describing Community.
1.3.6.1.4.1.2356.800.3.2332.1.6.3.2.1.3Columngs2328fSnmpCommunitiesUserNameread-writecurrentUp to 32 characters describing User Name.
1.3.6.1.4.1.2356.800.3.2332.1.6.3.2.1.4Columngs2328fSnmpCommunitiesSourceIPread-writecurrentSNMP access source ip.
1.3.6.1.4.1.2356.800.3.2332.1.6.3.2.1.5Columngs2328fSnmpCommunitiesSourceMaskread-writecurrentSNMP access source address mask.
1.3.6.1.4.1.2356.800.3.2332.1.6.3.2.1.6Columngs2328fSnmpCommunitiesRowStatusread-writecurrent1: active 2: notInservice 4: destroy 5: undo
1.3.6.1.4.1.2356.800.3.2332.1.6.4Nodegs2328fSnmpUsers
1.3.6.1.4.1.2356.800.3.2332.1.6.4.1Scalargs2328fSnmpUsersCreateread-writecurrentdefault: 0 0 : None (read only) 1 : Create entry
1.3.6.1.4.1.2356.800.3.2332.1.6.4.2Tablegs2328fSnmpUsersTablenot-accessiblecurrentCreate SNMPv3 users entry.
1.3.6.1.4.1.2356.800.3.2332.1.6.4.2.1Rowgs2328fSnmpUsersEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.1.6.4.2.1.1Columngs2328fSnmpUsersIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.1.6.4.2.1.2Columngs2328fSnmpUsersUserNameread-writecurrentUp to 32 characters describing User Name.
1.3.6.1.4.1.2356.800.3.2332.1.6.4.2.1.3Columngs2328fSnmpUsersSecurityLevelread-writecurrent1: No authentication and no privacy. 2: Authentication and no privacy. 3: Authentication and privacy.
1.3.6.1.4.1.2356.800.3.2332.1.6.4.2.1.4Columngs2328fSnmpUsersAuthenticationProtocolread-writecurrent0: None. 1: MD5. 2: SHA
1.3.6.1.4.1.2356.800.3.2332.1.6.4.2.1.5Columngs2328fSnmpUsersAuthenticationPasswordread-writecurrentAuthentication Password, is used for authenticating. The return value is always '********'. If the authentication protocol is MD5, the length of password shoul…
1.3.6.1.4.1.2356.800.3.2332.1.6.4.2.1.6Columngs2328fSnmpUsersPrivacyProtocolread-writecurrent0: None. 1: DES. 2: AES This is the Privacy Protocol, which is used in AuthPriv. An empty string will be returned if the security level is not 3(AuthPriv)
1.3.6.1.4.1.2356.800.3.2332.1.6.4.2.1.7Columngs2328fSnmpUsersPrivacyPasswordread-writecurrentThe password is Privacy Key. The return value is always '********'. This Key must be more than 8 characters, and less than 32 characters.
1.3.6.1.4.1.2356.800.3.2332.1.6.4.2.1.8Columngs2328fSnmpUsersRowStatusread-writecurrent1: active 2: notInservice 4: destroy 5: undo
1.3.6.1.4.1.2356.800.3.2332.1.6.5Nodegs2328fSnmpGroups
1.3.6.1.4.1.2356.800.3.2332.1.6.5.1Scalargs2328fSnmpGroupsCreateread-writecurrentdefault: 0 0 : None (read only) 1 : Create entry
1.3.6.1.4.1.2356.800.3.2332.1.6.5.2Tablegs2328fSnmpGroupsTablenot-accessiblecurrentCreate SNMPv3 groups entry.
1.3.6.1.4.1.2356.800.3.2332.1.6.5.2.1Rowgs2328fSnmpGroupsEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.1.6.5.2.1.1Columngs2328fSnmpGroupsIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.1.6.5.2.1.2Columngs2328fSnmpGroupsSecurityModelread-writecurrent1: v1. 2: v2c. 3: usm.
1.3.6.1.4.1.2356.800.3.2332.1.6.5.2.1.3Columngs2328fSnmpGroupsSecurityNameread-writecurrentUp to 32 characters describing User Name.
1.3.6.1.4.1.2356.800.3.2332.1.6.5.2.1.4Columngs2328fSnmpGroupsGroupNameread-writecurrentUp to 32 characters describing Group Name.
1.3.6.1.4.1.2356.800.3.2332.1.6.5.2.1.5Columngs2328fSnmpGroupsRowStatusread-writecurrent1: active 2: notInservice 4: destroy 5: undo
1.3.6.1.4.1.2356.800.3.2332.1.6.6Nodegs2328fSnmpViews
1.3.6.1.4.1.2356.800.3.2332.1.6.6.1Scalargs2328fSnmpViewsCreateread-writecurrentdefault: 0 0 : None (read only) 1 : Create entry
1.3.6.1.4.1.2356.800.3.2332.1.6.6.2Tablegs2328fSnmpViewsTablenot-accessiblecurrentCreate SNMPv1/v2 Views entry.
1.3.6.1.4.1.2356.800.3.2332.1.6.6.2.1Rowgs2328fSnmpViewsEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.1.6.6.2.1.1Columngs2328fSnmpViewsIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.1.6.6.2.1.2Columngs2328fSnmpViewsNameread-writecurrentUp to 32 characters describing view Name.
1.3.6.1.4.1.2356.800.3.2332.1.6.6.2.1.3Columngs2328fSnmpViewsTyperead-writecurrent1: included, An optional flag to indicate that this view subtree should be included. 2: excluded, An optional flag to indicate that this view subtree should be…
1.3.6.1.4.1.2356.800.3.2332.1.6.6.2.1.4Columngs2328fSnmpViewsOIDSubtreeread-writecurrentThe OID defining the root of the subtree to add to the named view.
1.3.6.1.4.1.2356.800.3.2332.1.6.6.2.1.5Columngs2328fSnmpViewsRowStatusread-writecurrent1: active 2: notInservice 4: destroy 5: undo
1.3.6.1.4.1.2356.800.3.2332.1.6.7Nodegs2328fSnmpAccess
1.3.6.1.4.1.2356.800.3.2332.1.6.7.1Scalargs2328fSnmpAccessCreateread-writecurrentdefault: 0 0 : None (read only) 1 : Create entry
1.3.6.1.4.1.2356.800.3.2332.1.6.7.2Tablegs2328fSnmpAccessTablenot-accessiblecurrentCreate SNMPv3 Access entry.
1.3.6.1.4.1.2356.800.3.2332.1.6.7.2.1Rowgs2328fSnmpAccessEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.1.6.7.2.1.1Columngs2328fSnmpAccessIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.1.6.7.2.1.2Columngs2328fSnmpAccessGroupNameread-writecurrentUp to 32 characters describing Group Name.
1.3.6.1.4.1.2356.800.3.2332.1.6.7.2.1.3Columngs2328fSnmpAccessSecurityModelread-writecurrent0: any. 1: v1. 2: v2c. 3: usm.
1.3.6.1.4.1.2356.800.3.2332.1.6.7.2.1.4Columngs2328fSnmpAccessSecurityLevelread-writecurrent1: No authentication and no privacy. 2: Authentication and no privacy. 3: Authentication and privacy.
1.3.6.1.4.1.2356.800.3.2332.1.6.7.2.1.5Columngs2328fSnmpAccessReadViewNameread-writecurrentUp to 32 characters describing Read View Name. None is reserved for Empty.
1.3.6.1.4.1.2356.800.3.2332.1.6.7.2.1.6Columngs2328fSnmpAccessWriteViewNameread-writecurrentUp to 32 characters describing Write View Name. None is reserved for Empty.
1.3.6.1.4.1.2356.800.3.2332.1.6.7.2.1.7Columngs2328fSnmpAccessRowStatusread-writecurrent1: active 2: notInservice 4: destroy 5: undo
1.3.6.1.4.1.2356.800.3.2332.2Nodegs2328fConfiguration
1.3.6.1.4.1.2356.800.3.2332.2.1Nodegs2328fPort
1.3.6.1.4.1.2356.800.3.2332.2.1.1Tablegs2328fPortConfigurationTablenot-accessiblecurrentShow port configurations.
1.3.6.1.4.1.2356.800.3.2332.2.1.1.1Rowgs2328fPortConfigurationEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.1.1.1Columngs2328fPortConfPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.1.1.1.2Columngs2328fPortConfPortMediaread-onlycurrentShow port media.
1.3.6.1.4.1.2356.800.3.2332.2.1.1.1.3Columngs2328fPortConfLinkread-onlycurrentThe current link state.
1.3.6.1.4.1.2356.800.3.2332.2.1.1.1.4Columngs2328fPortConfCurrentSpeedread-onlycurrentThe current link speed of the port.
1.3.6.1.4.1.2356.800.3.2332.2.1.1.1.5Columngs2328fPortConfSpeedread-writecurrentdefault: 1, 0: disable state, 1: auto, 2: 10 Half, 3: 10 Full, 4: 100 Half, 5: 100 Full, 6: 1G full, only 'Dual Media' port have 7-11 option. Dual Media port d…
1.3.6.1.4.1.2356.800.3.2332.2.1.1.1.6Columngs2328fPortConfCurrentFlowControlRxread-onlycurrent0: disable 1: enable 2: no support.
1.3.6.1.4.1.2356.800.3.2332.2.1.1.1.7Columngs2328fPortConfCurrentFlowControlTxread-onlycurrent0: disable 1: enable 2: no support.
1.3.6.1.4.1.2356.800.3.2332.2.1.1.1.8Columngs2328fPortConfFlowControlread-writecurrentdefault: 0, 0: disable 1: enable 2: no support.
1.3.6.1.4.1.2356.800.3.2332.2.1.1.1.9Columngs2328fPortConfMaxFrameSizeread-writecurrentdefault: 9600 , range : 1518 - 9600
1.3.6.1.4.1.2356.800.3.2332.2.1.1.1.10Columngs2328fPortConfExcessiveCollisionModeread-writecurrentdefault: 0, Excessive Collision Mode : 0: Discard, 1: Restart, 2: no support.
1.3.6.1.4.1.2356.800.3.2332.2.1.1.1.11Columngs2328fPortConfPowerControlread-writecurrentdefault: 0, PowerControl : 0: disable, 1: Actiphy, 2: Dynamic (perfectReach), 3: Enable, 4: no support.
1.3.6.1.4.1.2356.800.3.2332.2.1.1.1.12Columngs2328fPortConfDescriptionread-writecurrentInterface specific description. Up to 47 characters describing this interface.
1.3.6.1.4.1.2356.800.3.2332.2.1.2Tablegs2328fPortTrafficStatisticsTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1Rowgs2328fPortTrafficStatisticsEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.1Columngs2328fPortTrafficStatisticsPortnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.2Columngs2328fPortTrafficStatisticsClearread-writecurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.3Columngs2328fPortTrafficRxPacketsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.4Columngs2328fPortTrafficRxOctetsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.5Columngs2328fPortTrafficRxUnicastread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.6Columngs2328fPortTrafficRxMulticastread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.7Columngs2328fPortTrafficRxBroadcastread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.8Columngs2328fPortTrafficRxPauseread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.9Columngs2328fPortTrafficRx64Bytesread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.10Columngs2328fPortTrafficRx65to127Bytesread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.11Columngs2328fPortTrafficRx128to255Bytesread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.12Columngs2328fPortTrafficRx256to511Bytesread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.13Columngs2328fPortTrafficRx512to1023Bytesread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.14Columngs2328fPortTrafficRx1024to1526Bytesread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.15Columngs2328fPortTrafficRxExceecd1527Bytesread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.16Columngs2328fPortTrafficRxQ0read-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.17Columngs2328fPortTrafficRxQ1read-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.18Columngs2328fPortTrafficRxQ2read-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.19Columngs2328fPortTrafficRxQ3read-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.20Columngs2328fPortTrafficRxQ4read-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.21Columngs2328fPortTrafficRxQ5read-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.22Columngs2328fPortTrafficRxQ6read-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.23Columngs2328fPortTrafficRxQ7read-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.24Columngs2328fPortTrafficRxDropsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.25Columngs2328fPortTrafficRxCRCorAlignmentread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.26Columngs2328fPortTrafficRxUndersizeread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.27Columngs2328fPortTrafficRxOversizeread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.28Columngs2328fPortTrafficRxFragmentsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.29Columngs2328fPortTrafficRxJabberread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.30Columngs2328fPortTrafficRxFilteredread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.31Columngs2328fPortTrafficTxPacketsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.32Columngs2328fPortTrafficTxOctetsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.33Columngs2328fPortTrafficTxUnicastread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.34Columngs2328fPortTrafficTxMulticastread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.35Columngs2328fPortTrafficTxBroadcastread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.36Columngs2328fPortTrafficTxPauseread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.37Columngs2328fPortTrafficTx64Bytesread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.38Columngs2328fPortTrafficTx65to127Bytesread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.39Columngs2328fPortTrafficTx128to255Bytesread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.40Columngs2328fPortTrafficTx256to511Bytesread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.41Columngs2328fPortTrafficTx512to1023Bytesread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.42Columngs2328fPortTrafficTx1024to1526Bytesread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.43Columngs2328fPortTrafficTxExceecd1527Bytesread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.44Columngs2328fPortTrafficTxQ0read-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.45Columngs2328fPortTrafficTxQ1read-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.46Columngs2328fPortTrafficTxQ2read-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.47Columngs2328fPortTrafficTxQ3read-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.48Columngs2328fPortTrafficTxQ4read-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.49Columngs2328fPortTrafficTxQ5read-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.50Columngs2328fPortTrafficTxQ6read-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.51Columngs2328fPortTrafficTxQ7read-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.52Columngs2328fPortTrafficTxDropsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.2.1.53Columngs2328fPortTrafficTxLateOrExcCollread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.3Nodegs2328fPortQoSStatistics
1.3.6.1.4.1.2356.800.3.2332.2.1.3.1Scalargs2328fPortQoSStatisticsClearread-onlycurrentdefault: 0 0: none 1: clear
1.3.6.1.4.1.2356.800.3.2332.2.1.3.2Tablegs2328fPortQoSStatisticsTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.3.2.1Rowgs2328fPortQoSStatisticsEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.3.2.1.1Columngs2328fPortQoSStatisticsPortnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.3.2.1.2Columngs2328fPortQoSQ0Rxread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.3.2.1.3Columngs2328fPortQoSQ0Txread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.3.2.1.4Columngs2328fPortQoSQ1Rxread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.3.2.1.5Columngs2328fPortQoSQ1Txread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.3.2.1.6Columngs2328fPortQoSQ2Rxread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.3.2.1.7Columngs2328fPortQoSQ2Txread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.3.2.1.8Columngs2328fPortQoSQ3Rxread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.3.2.1.9Columngs2328fPortQoSQ3Txread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.3.2.1.10Columngs2328fPortQoSQ4Rxread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.3.2.1.11Columngs2328fPortQoSQ4Txread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.3.2.1.12Columngs2328fPortQoSQ5Rxread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.3.2.1.13Columngs2328fPortQoSQ5Txread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.3.2.1.14Columngs2328fPortQoSQ6Rxread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.3.2.1.15Columngs2328fPortQoSQ6Txread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.3.2.1.16Columngs2328fPortQoSQ7Rxread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.3.2.1.17Columngs2328fPortQoSQ7Txread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.4Tablegs2328fSFPInfoTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.4.1Rowgs2328fSFPInfoEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.4.1.1Columngs2328fSFPInfoIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.4.1.2Columngs2328fSFPInfoPortread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.4.1.3Columngs2328fSFPConnectorTyperead-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.4.1.4Columngs2328fSFPFiberTyperead-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.4.1.5Columngs2328fSFPTxCentralWavelengthread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.4.1.6Columngs2328fSFPBaudRateread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.4.1.7Columngs2328fSFPVendorOUIread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.4.1.8Columngs2328fSFPVendorNameread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.4.1.9Columngs2328fSFPVendorPNread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.4.1.10Columngs2328fSFPVendorRevread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.4.1.11Columngs2328fSFPVendorSNread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.4.1.12Columngs2328fSFPDateCoderead-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.4.1.13Columngs2328fSFPTemperatureread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.4.1.14Columngs2328fSFPVccread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.4.1.15Columngs2328fSFPMon1Biasread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.4.1.16Columngs2328fSFPMon2TxPWRread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1.4.1.17Columngs2328fSFPMon3RxPWRread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.2Nodegs2328fVoiceVLAN
1.3.6.1.4.1.2356.800.3.2332.2.2.1Nodegs2328fVoiceVLANConf
1.3.6.1.4.1.2356.800.3.2332.2.2.1.1Scalargs2328fVoiceVLANModeread-writecurrentVoice VLAN mode operation. default: 0, 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.2.2.1.2Scalargs2328fVoiceVLANVLANIdread-writecurrentVoice VLAN ID. default: 1000, range : 1-4094.
1.3.6.1.4.1.2356.800.3.2332.2.2.1.3Scalargs2328fVoiceVLANAgingTimeread-writecurrentVoice VLAN secure learning aging time. default: 86400, range : 10 - 10000000.
1.3.6.1.4.1.2356.800.3.2332.2.2.1.4Scalargs2328fVoiceVLANTrafficClassread-writecurrentVoice VLAN traffic class, all traffic on the Voice VLAN will apply this class, available value is from 0(Low) to 7(High). default: 7.
1.3.6.1.4.1.2356.800.3.2332.2.2.1.5Tablegs2328fVoiceVLANPortTablenot-accessiblecurrentShow Voice Vlan configuration.
1.3.6.1.4.1.2356.800.3.2332.2.2.1.5.1Rowgs2328fVoiceVLANPortEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.2.1.5.1.1Columngs2328fVoiceVLANPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.2.1.5.1.2Columngs2328fVoiceVLANPortModeread-writecurrentVoice VLAN port mode. default: 0, 0: Disable (Disjoin from Voice VLAN.) 1: Auto (Enable auto detect mode. It detects whether there is VoIP phone attached to th…
1.3.6.1.4.1.2356.800.3.2332.2.2.1.5.1.3Columngs2328fVoiceVLANPortSecurityread-writecurrentVoice VLAN port security mode. default: 0, 0: Disable (Disjoin from Voice VLAN.) 1: enable ( Enable Voice VLAN security mode. When the function is enabled, all…
1.3.6.1.4.1.2356.800.3.2332.2.2.1.5.1.4Columngs2328fVoiceVLANPortDiscoveryProtocolread-writecurrentVoice VLAN port discovery protocol. default: 0 0: OUI (Detect telephony device by OUI address.) 1: LLDP (Detect telephony device by LLDP.) 2: Both (Both OUI an…
1.3.6.1.4.1.2356.800.3.2332.2.2.1.5.1.5Columngs2328fVoiceVLANSkipNASread-writecurrentVoice VLAN skip NAS mode. default: 0, 0: Disable (Do not skip NAS on Voice VLAN.) 1: enable (Enable skipping of NAS on Voice VLAN. When the function is enabled…
1.3.6.1.4.1.2356.800.3.2332.2.2.2Nodegs2328fVoiceVLANOUI
1.3.6.1.4.1.2356.800.3.2332.2.2.2.1Scalargs2328fVoiceVLANOUICreateread-writecurrentdefault: 0 0 : None (read only) 1 : Create an OUI entry
1.3.6.1.4.1.2356.800.3.2332.2.2.2.2Tablegs2328fVoiceVLANOUITablenot-accessiblecurrentCreate Voice VLAN OUI entry. Modify OUI table will restart auto detect OUI process.
1.3.6.1.4.1.2356.800.3.2332.2.2.2.2.1Rowgs2328fVoiceVLANOUIEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.2.2.2.1.1Columngs2328fVoiceVLANOUIIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.2.2.2.1.2Columngs2328fVoiceVLANTelephonyOUIread-writecurrentOUI address, format : 0a 1b 2c
1.3.6.1.4.1.2356.800.3.2332.2.2.2.2.1.3Columngs2328fVoiceVLANDescriptionread-writecurrentUp to 32 characters describing OUI address.
1.3.6.1.4.1.2356.800.3.2332.2.2.2.2.1.4Columngs2328fVoiceVLANOUIRowStatusread-writecurrent1: active 2: notInservice 4: destroy 5: undo
1.3.6.1.4.1.2356.800.3.2332.2.3Nodegs2328fGARP
1.3.6.1.4.1.2356.800.3.2332.2.3.1Tablegs2328fGARPConfTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.3.1.1Rowgs2328fGARPConfEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.3.1.1.1Columngs2328fGARPConfPortnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.3.1.1.2Columngs2328fGARPJoinTimerread-writecurrentdefault: 200, range : 200 - 1000
1.3.6.1.4.1.2356.800.3.2332.2.3.1.1.3Columngs2328fGARPLeaveTimerread-writecurrentdefault: 600 , range : 600 - 3000
1.3.6.1.4.1.2356.800.3.2332.2.3.1.1.4Columngs2328fGARPLeaveAllTimerread-writecurrentdefault: 10000, range : 10000 - 50000
1.3.6.1.4.1.2356.800.3.2332.2.3.1.1.5Columngs2328fGARPApplicantionread-writecurrentdefault: 1 1: GVRP
1.3.6.1.4.1.2356.800.3.2332.2.3.1.1.6Columngs2328fGARPAttributeTyperead-writecurrentdefault: 1 1: VLAN
1.3.6.1.4.1.2356.800.3.2332.2.3.1.1.7Columngs2328fGARPApplicantread-writecurrentdefault: 0 0: normal-participant 1: non-participant
1.3.6.1.4.1.2356.800.3.2332.2.3.2Tablegs2328fGARPStatisticsTablenot-accessiblecurrentShow the basic GARP port statistics.
1.3.6.1.4.1.2356.800.3.2332.2.3.2.1Rowgs2328fGARPStatisticsEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.3.2.1.1Columngs2328fGARPStatisticsPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.3.2.1.2Columngs2328fGARPStatisticsPeerMACread-onlycurrentPeer MAC is MAC address of the neighbour Switch from with GARP frame is received.
1.3.6.1.4.1.2356.800.3.2332.2.3.2.1.3Columngs2328fGARPStatisticsFailedCountread-onlycurrentexplain Failed count here.
1.3.6.1.4.1.2356.800.3.2332.2.4Nodegs2328fGVRP
1.3.6.1.4.1.2356.800.3.2332.2.4.1Nodegs2328fGVRPConf
1.3.6.1.4.1.2356.800.3.2332.2.4.1.1Scalargs2328fGVRPModeread-writecurrentdefault: 0, 0: disable, 1: enable.
1.3.6.1.4.1.2356.800.3.2332.2.4.1.2Tablegs2328fGVRPConfTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.4.1.2.1Rowgs2328fGVRPConfEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.4.1.2.1.1Columngs2328fGVRPConfPortnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.4.1.2.1.2Columngs2328fGVRPConfPortModeread-writecurrentdefault: 0 1: enable 0: disable
1.3.6.1.4.1.2356.800.3.2332.2.4.1.2.1.3Columngs2328fGVRPConfPortRRoleread-writecurrentdefault: 0 1: enable 0: disable
1.3.6.1.4.1.2356.800.3.2332.2.4.2Tablegs2328fGVRPStatisticsTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.4.2.1Rowgs2328fGVRPStatisticsEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.4.2.1.1Columngs2328fGVRPStatisticsPortnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.4.2.1.2Columngs2328fGVRPStatisticsJoinTxCntread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.4.2.1.3Columngs2328fGVRPStatisticsLeaveTxCntread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.6Nodegs2328fMirroring
1.3.6.1.4.1.2356.800.3.2332.2.6.1Scalargs2328fPortToMirrorOnread-writecurrentdefault: 0 0: disable, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.6.2Tablegs2328fMirrorTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.6.2.1Rowgs2328fMirrorEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.6.2.1.1Columngs2328fMirrorPortnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.6.2.1.2Columngs2328fMirrorModeread-writecurrentdefault: 0 0: disable 1: enable 2: rx only 3: tx only Setting Tx mirroring for analyzer port has no effect. Tx mirroring ignored
1.3.6.1.4.1.2356.800.3.2332.2.7Nodegs2328fTrapEventSeverity
1.3.6.1.4.1.2356.800.3.2332.2.7.1Scalargs2328fTrapEventSeverityACLread-writecurrentdefault: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.2Scalargs2328fTrapEventSeverityACLLogread-writecurrentdefault: 7(Debug) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.3Scalargs2328fTrapEventSeverityAccessMgmtread-writecurrentdefault: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.4Scalargs2328fTrapEventSeverityAuthFailedread-writecurrentdefault: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.5Scalargs2328fTrapEventSeverityColdStartread-writecurrentdefault: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.6Scalargs2328fTrapEventSeverityConfigInforead-writecurrentdefault: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.7Scalargs2328fTrapEventSeverityFirmwareUpgraderead-writecurrentdefault: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.8Scalargs2328fTrapEventSeverityImportExportread-writecurrentdefault: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.9Scalargs2328fTrapEventSeverityLACPread-writecurrentdefault: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.10Scalargs2328fTrapEventSeverityLinkStatusread-writecurrentdefault: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.11Scalargs2328fTrapEventSeverityLoginread-writecurrentdefault: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.12Scalargs2328fTrapEventSeverityLogoutread-writecurrentdefault: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.13Scalargs2328fTrapEventSeverityLoopProtectread-writecurrentdefault: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.14Scalargs2328fTrapEventSeverityMgmtIPChangeread-writecurrentdefault: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.15Scalargs2328fTrapEventSeverityModuleChangeread-writecurrentdefault: 5(Notice) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.16Scalargs2328fTrapEventSeverityNASread-writecurrentdefault: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.17Scalargs2328fTrapEventSeverityPasswordChangeread-writecurrentdefault: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.18Scalargs2328fTrapEventSeverityPortSecurityread-writecurrentdefault: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.20Scalargs2328fTrapEventSeverityVLANread-writecurrentdefault: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.21Scalargs2328fTrapEventSeverityWarmStartread-writecurrentdefault: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.25Scalargs2328fTrapEventSeverityARPConflictread-writecurrentdefault: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.27Scalargs2328fTrapEventSeveritySpoofingLimitread-writecurrentdefault: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.7.28Scalargs2328fTrapEventSeverityStaticARPConflictread-writecurrentdefault: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.8Nodegs2328fSMTP
1.3.6.1.4.1.2356.800.3.2332.2.8.1Scalargs2328fSMTPMailServerread-writecurrentUp to 47 characters describing email server.
1.3.6.1.4.1.2356.800.3.2332.2.8.2Scalargs2328fSMTPUserNameread-writecurrentUp to 47 characters describing user name.
1.3.6.1.4.1.2356.800.3.2332.2.8.3Scalargs2328fSMTPPasswordread-writecurrentUp to 47 characters describing password.
1.3.6.1.4.1.2356.800.3.2332.2.8.4Scalargs2328fSMTPServeriryLevelread-writecurrentdefault: 6 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug
1.3.6.1.4.1.2356.800.3.2332.2.8.5Scalargs2328fSMTPSenderread-writecurrentUp to 47 characters describing sender.
1.3.6.1.4.1.2356.800.3.2332.2.8.6Scalargs2328fSMTPReturnPathread-writecurrentUp to 47 characters describing return path.
1.3.6.1.4.1.2356.800.3.2332.2.8.7Scalargs2328fSMTPEmailAddress1read-writecurrentUp to 47 characters describing mail address.
1.3.6.1.4.1.2356.800.3.2332.2.8.8Scalargs2328fSMTPEmailAddress2read-writecurrentUp to 47 characters describing mail address.
1.3.6.1.4.1.2356.800.3.2332.2.8.9Scalargs2328fSMTPEmailAddress3read-writecurrentUp to 47 characters describing mail address.
1.3.6.1.4.1.2356.800.3.2332.2.8.10Scalargs2328fSMTPEmailAddress4read-writecurrentUp to 47 characters describing mail address.
1.3.6.1.4.1.2356.800.3.2332.2.8.11Scalargs2328fSMTPEmailAddress5read-writecurrentUp to 47 characters describing mail address.
1.3.6.1.4.1.2356.800.3.2332.2.8.12Scalargs2328fSMTPEmailAddress6read-writecurrentUp to 47 characters describing mail address.
1.3.6.1.4.1.2356.800.3.2332.2.9Nodegs2328fACL
1.3.6.1.4.1.2356.800.3.2332.2.9.1Tablegs2328fACLPortsConfTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.9.1.1Rowgs2328fACLPortsConfEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.9.1.1.1Columngs2328fACLPortsConfPortnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.9.1.1.2Columngs2328fACLPortsConfPolicyIDread-writecurrentdefault: 0, range : 0 - 255
1.3.6.1.4.1.2356.800.3.2332.2.9.1.1.3Columngs2328fACLPortsConfActionread-writecurrentdefault: 1, 0: Deny 1: Permit
1.3.6.1.4.1.2356.800.3.2332.2.9.1.1.4Columngs2328fACLPortsConfRateLimiterIDread-writecurrentdefault: 0, 0: Disable range : 0 - 12
1.3.6.1.4.1.2356.800.3.2332.2.9.1.1.5Columngs2328fACLPortsConfPortRedirectread-writecurrentdefault: 0 0: Disable range : 0 - end port number
1.3.6.1.4.1.2356.800.3.2332.2.9.1.1.6Columngs2328fACLPortsConfMirrorread-writecurrentdefault: 0 0: Disable 1: Enable
1.3.6.1.4.1.2356.800.3.2332.2.9.1.1.7Columngs2328fACLPortsConfLoggingread-writecurrentdefault: 0 0: Disable 1: Enable
1.3.6.1.4.1.2356.800.3.2332.2.9.1.1.8Columngs2328fACLPortsConfShutdownread-writecurrentdefault: 0 0: Disable 1: Enable
1.3.6.1.4.1.2356.800.3.2332.2.9.1.1.9Columngs2328fACLPortsConfStateread-writecurrentdefault: 1 0: Disable 1: Enable
1.3.6.1.4.1.2356.800.3.2332.2.9.1.1.10Columngs2328fACLPortsConfCounterread-onlycurrentCounts the number of frames that match this ACE.
1.3.6.1.4.1.2356.800.3.2332.2.9.2Tablegs2328fACLRateLimiterTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.9.2.1Rowgs2328fACLRateLimiterEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.9.2.1.1Columngs2328fACLRateLimiterIDnot-accessiblecurrentRate Limiter ID. range : 1-12
1.3.6.1.4.1.2356.800.3.2332.2.9.2.1.2Columngs2328fACLRateLimiterUnitread-writecurrentdefault: 0, 0: pps 1: kbps
1.3.6.1.4.1.2356.800.3.2332.2.9.2.1.3Columngs2328fACLRateLimiterRateread-writecurrentdefault: 1, range : <0-3276700> pps <0-10000> kbps
1.3.6.1.4.1.2356.800.3.2332.2.9.3Nodegs2328fACLACE
1.3.6.1.4.1.2356.800.3.2332.2.9.3.1Scalargs2328fACLACECreateread-writecurrentdefault: 0 0 : None (read only) 1 : Create an ACE entry
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2Tablegs2328fACLACETablenot-accessiblecurrentCreate ACL ACE entry.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1Rowgs2328fACLACEEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.1Columngs2328fACLACEIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.2Columngs2328fACLACEIDread-writecurrentIf the ACE ID is specified and an entry with this ACE ID already exists, the ACE will be modified. Otherwise, a new ACE will be added. range : 1 - 256.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.3Columngs2328fACLACENextIDread-writecurrentIf the next ACE ID is non zero, the ACE will be placed before this ACE in the list. If the next ACE ID is zero, the ACE will be placed last in the list. range …
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.4Columngs2328fACLACEIngressPortread-writecurrentIndicates the ingress port of the ACE. Possible values are: All: The ACE will match all ingress port. Port: The ACE will match a specific ingress port.Format: …
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.5Columngs2328fACLACEPortPolicyNumberread-writecurrentpolicy value. range : 0 - 255.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.6Columngs2328fACLACEPortPolicyBitmaskread-writecurrentpolicy bitmask. range : 0 - 255(0xff).
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.7Columngs2328fACLACEFrameTyperead-writecurrent0: any, 1: arp, 2: etype, 3: icmp, 4: ipv4, 5: tcp, 6: udp.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.8Columngs2328fACLACEActionread-writecurrentdefault: 1, 0: Deny 1: Permit
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.9Columngs2328fACLACEDenyPortRedirectread-writecurrentFrames that hit the ACE are redirected to the port number specified here. Disabled: indicates that the port redirect operation is disabled. Port Format: 1,3,6.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.10Columngs2328fACLACELoggingread-writecurrentdefault: 0, 0: disable - Frames matching the ACE are not logged. 1: enable - Frames matching the ACE are stored in the system log.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.11Columngs2328fACLACEMirrorread-writecurrentdefault: 0, 0: disable - Frames matching the ACE are not mirrored. 1: enable - Frames matching the ACE are mirrored.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.12Columngs2328fACLACERateLimiterread-writecurrentdefault: 0, 0: Disable range : 0 - 12
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.13Columngs2328fACLACEShutdownread-writecurrentdefault: 0, 0: disable - Port shut down is disabled for the AC. 1: enable - If a frame matches the ACE, the ingress port will be disabled.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.14Columngs2328fACLACEVLAN8021QTaggedread-writecurrentSpecify whether frames can hit the action according to the 802.1Q tagged. default: 2, 0: disable - Untagged frame only. 1: enable - Tagged frame only. 2: Any -…
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.15Columngs2328fACLACEVLANTagPriorityread-writecurrentSpecify the tag priority for this ACE. The tag priority can't be set when 802.1Q Tagged is disabled default: 8, 8: Any, range : 0 - 8
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.16Columngs2328fACLACEVLANVIDread-writecurrentSpecify the VLAN ID filter for this ACE. The vid can't be set when 802.1Q Tagged is disabled. default: 0, 0: Any - No VLAN ID filter is specified. range : 0 - …
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.17Columngs2328fACLACEEtherTyperead-writecurrent0: Any - Any but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6). range : 0 or 1536(0x0600)- 65535(0xffff).
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.18Columngs2328fACLACESMACread-writecurrentConfigure source MAC address for this ACE. <mac-address>: A frame that hits this ACE matches this source MAC address value. Any: Don't care.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.19Columngs2328fACLACEDMACTyperead-writecurrentDMAC Type. default: 0, 0: Any - Don't care. 1: Broadcast - Frame must be broadcast. 2: Unicast - Frame must be unicast. 3: Multicast - Frame must be multicast.…
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.20Columngs2328fACLACEDMACread-writecurrentConfigure destination MAC address for this ACE. <mac-address>: A frame that hits this ACE matches this destination MAC address value. Any: Don't care. Broadcas…
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.21Columngs2328fACLACEArpOpcoderead-writecurrentConfigure ARP opcode for this ACE. default: 0, 0: Any - Don't care. 1: arp. 2: rarp. 3: other. 4: No data. range : 0 - 4
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.22Columngs2328fACLACEArpFlagsRequestReplyread-writecurrentSpecify the available ARP/RARP opcode (OP) flag for this ACE. default: 2, 0: Frame must have ARP Reply or RARP Reply OP flag. 1: Frame must have ARP Request or…
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.23Columngs2328fACLACEArpFlagsArpSmacread-writecurrentSpecify whether frames can hit the action according to their sender hardware address field (SHA) settings. default: 2, 0: ARP frames where SHA is not equal to …
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.24Columngs2328fACLACEArpFlagsRarpDmacread-writecurrentSpecify whether frames can hit the action according to their target hardware address field (THA) settings. default: 2, 0: RARP frames where THA is not equal to…
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.25Columngs2328fACLACEArpFlagsLengthread-writecurrentSpecify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and protocol address length (PLN) settings. default: 2, 0: …
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.26Columngs2328fACLACEArpFlagsIpread-writecurrentSpecify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings. default: 2, 0: ARP/RARP frames where the HLD is no…
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.27Columngs2328fACLACEArpFlagsEthernetread-writecurrentSpecify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings. default: 2, 0: ARP/RARP frames where the PRO is no…
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.28Columngs2328fACLACESIPTyperead-writecurrentConfigure source IP address for this ACE. default: 0, 0: Any - Don't care. 1: IP Address. 2: No data. range : 0 - 1
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.29Columngs2328fACLACESIPIPAddressread-writecurrentA frame that hits this ACE matches this source IP address value.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.30Columngs2328fACLACESIPNetworkPrefixread-writecurrentNetwork prefix. default: 32, 0: No data. range : 1 - 32
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.32Columngs2328fACLACEDIPTyperead-writecurrentConfigure destination IP address for this ACE. default: 0, 0: Any - Don't care. 1: IP Address. 2: No data. range : 0 - 1
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.33Columngs2328fACLACEDIPIPAddressread-writecurrentA frame that hits this ACE matches this destination IP address value.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.34Columngs2328fACLACEDIPNetworkPrefixread-writecurrentNetwork prefix. default: 32, 0: No data. range : 1 - 32
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.36Columngs2328fACLACEIPProtocolread-writecurrentConfigure IP protocol for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 256
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.37Columngs2328fACLACEIPFlagsTTLread-writecurrentConfigure IP Time-to-Live flags for this ACE. default: 2, 0: IPv4 frames with a Time-to-Live field is equal to zero. 1: IPv4 frames with a Time-to-Live field g…
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.38Columngs2328fACLACEIPFlagsOptionsread-writecurrentConfigure IP options flag for this ACE. default: 2, 0: IPv4 frames where the options flag is unset. 1: IPv4 frames where the options flag is set. 2: Any - Don'…
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.39Columngs2328fACLACEIPFlagsFragmentread-writecurrentConfigure IP fragment offset flags for this ACE. default: 2, 0: IPv4 frames where the MF bit is unset and the FRAG OFFSET field is equal zero. 1: IPv4 frames w…
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.40Columngs2328fACLACEICMPTyperead-writecurrentConfigure ICMP type for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 256
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.41Columngs2328fACLACEICMPCoderead-writecurrentConfigure ICMP code for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 257
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.42Columngs2328fACLACESourcePortMinread-writecurrentConfigure Source UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65536
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.43Columngs2328fACLACESourcePortMaxread-writecurrentConfigure Source UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65536
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.44Columngs2328fACLACEDestPortMinread-writecurrentConfigure Destination UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65535
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.45Columngs2328fACLACEDestPortMaxread-writecurrentConfigure Destination UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65535
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.46Columngs2328fACLACETCPFlagsFinread-writecurrentConfigure TCP (FIN) flags for this ACE. default: 2, 0: TCP frames where the FIN field is unset. 1: TCP frames where the FIN field is set. 2: Any - Don't care. …
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.47Columngs2328fACLACETCPFlagsSynread-writecurrentConfigure TCP (SYN) flags for this ACE. default: 2, 0: TCP frames where the SYN field is unset. 1: TCP frames where the SYN field is set. 2: Any - Don't care. …
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.48Columngs2328fACLACETCPFlagsRstread-writecurrentConfigure TCP (RST) flags for this ACE. default: 2, 0: TCP frames where the RST field is unset. 1: TCP frames where the RST field is set. 2: Any - Don't care. …
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.49Columngs2328fACLACETCPFlagsPshread-writecurrentConfigure TCP (PSH) flags for this ACE. default: 2, 0: TCP frames where the PSH field is unset. 1: TCP frames where the PSH field is set. 2: Any - Don't care. …
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.50Columngs2328fACLACETCPFlagsAckread-writecurrentConfigure TCP (ACK) flags for this ACE. default: 2, 0: TCP frames where the ACK field is unset. 1: TCP frames where the ACK field is set. 2: Any - Don't care. …
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.51Columngs2328fACLACETCPFlagsUrgread-writecurrentConfigure TCP (URG) flags for this ACE. default: 2, 0: TCP frames where the URG field is unset. 1: TCP frames where the URG field is set. 2: Any - Don't care. …
1.3.6.1.4.1.2356.800.3.2332.2.9.3.2.1.66Columngs2328fACLACERowStatusread-writecurrent1: active 2: notInservice 4: destroy 5: undo
1.3.6.1.4.1.2356.800.3.2332.2.9.3.3Scalargs2328fACLACEClearread-writecurrentdefault: 0 0 : No action 1 : Clear all ACL counters.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.4Scalargs2328fACLACEMoveACEIDread-writecurrentMove ACE, default: 0 ACE ID must be exist. range : 1 - 256.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.5Scalargs2328fACLACEMoveNextACEIDread-writecurrentMove ACE, default: 0 If the next ACE ID is non zero, the ACE will be placed before this ACE in the list. If the next ACE ID is zero, the ACE will be placed las…
1.3.6.1.4.1.2356.800.3.2332.2.9.3.6Tablegs2328fACLACEStatusTablenot-accessiblecurrentACL ACE Status entry.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.6.1Rowgs2328fACLACEStatusEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.9.3.6.1.1Columngs2328fACLACEStatusIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.9.3.6.1.2Columngs2328fACLACEStatusUserread-onlycurrentIndicates the ACL user. S : Static. IPMG : IP Management. IPSG : IP Source Guard. IPMC : IPMC. ARPI : Arp Inspection. UPnP : UPnP. DHCP : DHCP.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.6.1.3Columngs2328fACLACEStatusIDread-onlycurrentACE ID. range : 1 - 256.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.6.1.4Columngs2328fACLACEStatusIngressPortread-onlycurrentIndicates the ingress port of the ACE. Possible values are: All: The ACE will match all ingress port. Port: The ACE will match a specific ingress port.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.6.1.5Columngs2328fACLACEStatusFrameTyperead-onlycurrentIndicates the frame type of the ACE.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.6.1.6Columngs2328fACLACEStatusActionread-onlycurrentIndicates the forwarding action of the ACE.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.6.1.7Columngs2328fACLACEStatusRateLimiterread-onlycurrentIndicates the rate limiter number of the ACE.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.6.1.8Columngs2328fACLACEStatusPortCopyread-onlycurrentIndicates the port redirect operation of the ACE. Frames matching the ACE are redirected to the port number.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.6.1.9Columngs2328fACLACEStatusMirrorread-onlycurrentSpecify the mirror operation of this port.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.6.1.10Columngs2328fACLACEStatusCPUread-onlycurrentForward packet that matched the specific ACE to CPU.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.6.1.11Columngs2328fACLACEStatusCounterread-onlycurrentThe counter indicates the number of times the ACE was hit by a frame.
1.3.6.1.4.1.2356.800.3.2332.2.9.3.6.1.12Columngs2328fACLACEStatusConflictread-onlycurrentIndicates the hardware status of the specific ACE. The specific ACE is not applied to the hardware due to hardware limitations.
1.3.6.1.4.1.2356.800.3.2332.2.12Nodegs2328fLoopProtection
1.3.6.1.4.1.2356.800.3.2332.2.12.1Nodegs2328fLoopProtectionConfig
1.3.6.1.4.1.2356.800.3.2332.2.12.1.1Scalargs2328fLoopProtectionGlobalEnableread-writecurrentConfigure loop protection mode. 0: disable, 1: enable, default: disable.
1.3.6.1.4.1.2356.800.3.2332.2.12.1.2Scalargs2328fLoopProtectionTranmisstionTimeread-writecurrentConfigure loop protection transmit interval. default: 5, range: 1-10.
1.3.6.1.4.1.2356.800.3.2332.2.12.1.3Scalargs2328fLoopProtectionShutdownTimeread-writecurrentConfigure loop protection shutdown time. default: 180, range: 0-604800.
1.3.6.1.4.1.2356.800.3.2332.2.12.1.4Tablegs2328fLoopProtectionConfigurationTablenot-accessiblecurrentShow Loop Protection configurations.
1.3.6.1.4.1.2356.800.3.2332.2.12.1.4.1Rowgs2328fLoopProtectionConfigurationEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.12.1.4.1.1Columngs2328fLoopProtectionConfPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.12.1.4.1.2Columngs2328fLoopProtectionConfEnableread-writecurrentConfigure loop protection port mode. 0: disable, 1: enable, default: enable.
1.3.6.1.4.1.2356.800.3.2332.2.12.1.4.1.3Columngs2328fLoopProtectionConfActionread-writecurrentConfigure loop protection port action. 0: Shutdown port, 1: Shutdown port and Log, 2: Log Only, default: Shutdown port.
1.3.6.1.4.1.2356.800.3.2332.2.12.1.4.1.4Columngs2328fLoopProtectionConfTxmoderead-writecurrentConfigure loop protection port transmit mode. 0: disable, 1: enable, default: enable.
1.3.6.1.4.1.2356.800.3.2332.2.12.2Tablegs2328fLoopProtectionStatusTablenot-accessiblecurrentShow Loop Protection Status.
1.3.6.1.4.1.2356.800.3.2332.2.12.2.1Rowgs2328fLoopProtectionStatusEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.12.2.1.1Columngs2328fLoopProtectionStatusPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.12.2.1.2Columngs2328fLoopProtectionStatusActionread-onlycurrentThe currently configured port action.
1.3.6.1.4.1.2356.800.3.2332.2.12.2.1.3Columngs2328fLoopProtectionStatusTransmitread-onlycurrentThe currently configured port transmit mode.
1.3.6.1.4.1.2356.800.3.2332.2.12.2.1.4Columngs2328fLoopProtectionStatusLoopsread-onlycurrentThe number of loops detected on this port.
1.3.6.1.4.1.2356.800.3.2332.2.12.2.1.5Columngs2328fLoopProtectionStatusStatusread-onlycurrentThe current loop protection status of the port.
1.3.6.1.4.1.2356.800.3.2332.2.12.2.1.6Columngs2328fLoopProtectionStatusLoopread-onlycurrentWhether a loop is currently detected on the port.
1.3.6.1.4.1.2356.800.3.2332.2.12.2.1.7Columngs2328fLoopProtectionStatusTimeLastLoopread-onlycurrentThe time of the last loop event detected.
1.3.6.1.4.1.2356.800.3.2332.2.14Nodegs2328fQos
1.3.6.1.4.1.2356.800.3.2332.2.14.1Nodegs2328fQosPortClassification
1.3.6.1.4.1.2356.800.3.2332.2.14.1.1Tablegs2328fQosPortClassificationTablenot-accessiblecurrentQoS Ingress Port Classification .
1.3.6.1.4.1.2356.800.3.2332.2.14.1.1.1Rowgs2328fQosPortClassificationEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.14.1.1.1.1Columngs2328fQosPortClassificationPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.14.1.1.1.2Columngs2328fQosPortClassificationQoSclassread-writecurrentControls the default QoS class, i.e., the QoS class for frames not classified in any other way. There is a one to one mapping between QoS class, queue and prio…
1.3.6.1.4.1.2356.800.3.2332.2.14.1.1.1.3Columngs2328fQosPortClassificationDPlevelread-writecurrentDP level for frames not classified in any other way. range: 0-1, default: 0.
1.3.6.1.4.1.2356.800.3.2332.2.14.1.1.1.4Columngs2328fQosPortClassificationPCPread-writecurrentPriority Code Point. It is a 3-bit field storing the priority level for the 802.1Q frame. range: 0-7, default: 0.
1.3.6.1.4.1.2356.800.3.2332.2.14.1.1.1.5Columngs2328fQosPortClassificationDEIread-writecurrentDrop Eligible Indicator. It is a 1-bit field in the VLAN. range 0-1, default: 0.
1.3.6.1.4.1.2356.800.3.2332.2.14.1.1.1.6Columngs2328fQosPortClassificationTagClassread-writecurrentConfigure the classification mode for tagged frames. 0: Disable, 1: Enable, default: Disable.
1.3.6.1.4.1.2356.800.3.2332.2.14.1.1.1.7Columngs2328fQosPortClassificationDSCPBasedread-writecurrentClick to Enable DSCP Based QoS Ingress Port Classification. 0: disable, 1: enable, default: disable.
1.3.6.1.4.1.2356.800.3.2332.2.14.1.1.1.8Columngs2328fQosPortClassificationAddressModeread-writecurrentThe IP/MAC address mode specifying whether the QCL classification must be based on source (SMAC/SIP) or destination (DMAC/DIP) addresses on this port. 0: sourc…
1.3.6.1.4.1.2356.800.3.2332.2.14.1.2Tablegs2328fQoSIngressPortTagClassificationTablenot-accessiblecurrentShow QoS Ingress Port Tag Classification.
1.3.6.1.4.1.2356.800.3.2332.2.14.1.2.1Rowgs2328fQoSIngressPortTagClassificationEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.14.1.2.1.1Columngs2328fQoSIngressPortTagClassificationPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.14.1.2.1.2Columngs2328fQoSIngressPortTagPCPnot-accessiblecurrentrange: 1-8, PCP0:1, PCP1:2...
1.3.6.1.4.1.2356.800.3.2332.2.14.1.2.1.3Columngs2328fQoSIngressPortTagDEInot-accessiblecurrentrange: 1-2, DEI0:1, DEI1:2.
1.3.6.1.4.1.2356.800.3.2332.2.14.1.2.1.4Columngs2328fQoSIngressPortTagQosClassread-writecurrentrange: 0-7.
1.3.6.1.4.1.2356.800.3.2332.2.14.1.2.1.5Columngs2328fQoSIngressPortTagDPLevelread-writecurrentrange: 0-1.
1.3.6.1.4.1.2356.800.3.2332.2.14.2Tablegs2328fQosPortPolicingTablenot-accessiblecurrentconfigure the Policer settings for all switch ports.
1.3.6.1.4.1.2356.800.3.2332.2.14.2.1Rowgs2328fQosPortPolicingEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.14.2.1.1Columngs2328fQosPortPolicingPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.14.2.1.2Columngs2328fQosPortPolicingModeread-writecurrentControls whether the policer is enabled on this switch port. 0: disable, 1: enable, default: disable.
1.3.6.1.4.1.2356.800.3.2332.2.14.2.1.3Columngs2328fQosPortPolicingRateread-writecurrentControls the rate for the policer. range: 100-10000000(kbps/fps), default: 500(kbps).
1.3.6.1.4.1.2356.800.3.2332.2.14.2.1.4Columngs2328fQosPortPolicingUnitread-writecurrentControls the unit of measure for the policer rate. 0: kbps, 1: fps, default: kbps.
1.3.6.1.4.1.2356.800.3.2332.2.14.2.1.5Columngs2328fQosPortPolicingFlowControlread-writecurrentIf flow control is enabled and the port is in flow control mode, then pause frames are sent instead of discarding frames. 0: disable, 1: enable, default: disab…
1.3.6.1.4.1.2356.800.3.2332.2.14.3Nodegs2328fQosPortScheduler
1.3.6.1.4.1.2356.800.3.2332.2.14.3.1Tablegs2328fQosPortSchedulerModeTablenot-accessiblecurrentconfigure the basic QoS Port Scheduler Mode settings for all switch ports.
1.3.6.1.4.1.2356.800.3.2332.2.14.3.1.1Rowgs2328fQosPortSchedulerModeEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.14.3.1.1.1Columngs2328fQosSchedulerModePortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.14.3.1.1.2Columngs2328fQosSchedulerModeread-writecurrentControls whether the scheduler mode is Strict Priority or Weighted on this switch port. 0:Strict Priority 1:Weighted default: Strict Priority.
1.3.6.1.4.1.2356.800.3.2332.2.14.3.1.1.3Columngs2328fQosSchedulerShaperread-writecurrentControls whether the port shaper is enabled 0: Disable 1: Enable. default: disable.
1.3.6.1.4.1.2356.800.3.2332.2.14.3.1.1.4Columngs2328fQosSchedulerShaperRateread-writecurrentControls the rate for the port shaper. range: 100-1000000 default: 500 kbps.
1.3.6.1.4.1.2356.800.3.2332.2.14.3.2Tablegs2328fQosPortSchedulerTablenot-accessiblecurrentShow Qos Port Scheduler.
1.3.6.1.4.1.2356.800.3.2332.2.14.3.2.1Rowgs2328fQosPortSchedulerEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.14.3.2.1.1Columngs2328fQosSchedulerPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.14.3.2.1.2Columngs2328fQosSchedulerPortQueuenot-accessiblecurrentrange: 1-8. Q0: 1, Q1: 2, ...
1.3.6.1.4.1.2356.800.3.2332.2.14.3.2.1.3Columngs2328fQosSchedulerPortQueueShaperread-writecurrent0: disable 1:enable, default: 0.
1.3.6.1.4.1.2356.800.3.2332.2.14.3.2.1.4Columngs2328fQosSchedulerPortQueueShaperRateread-writecurrentrange: 100..1000000 kbps.
1.3.6.1.4.1.2356.800.3.2332.2.14.3.2.1.5Columngs2328fQosSchedulerPortQueueShaperExcessread-writecurrent0: disable 1:enable, default: 0.
1.3.6.1.4.1.2356.800.3.2332.2.14.3.2.1.6Columngs2328fQosSchedulerPortQueueSchedulerWeightread-writecurrentrange: 1-100, default: 17. Only use in Q0 - Q5. Q6 & Q7 show 0
1.3.6.1.4.1.2356.800.3.2332.2.14.3.2.1.7Columngs2328fQosSchedulerPortQueueSchedulerPercentread-onlycurrentOnly use in Q0 - Q5. Q6 & Q7 show empty
1.3.6.1.4.1.2356.800.3.2332.2.14.4Nodegs2328fQosPortEgressTagRemarking
1.3.6.1.4.1.2356.800.3.2332.2.14.4.1Tablegs2328fQosPortEgressTagRemarkingTablenot-accessiblecurrentconfigure the basic QoS Port Egress Tag Remark Configuration settings for all switch ports.
1.3.6.1.4.1.2356.800.3.2332.2.14.4.1.1Rowgs2328fQosPortEgressTagRemarkingEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.14.4.1.1.1Columngs2328fQosEgressTagRemarkingPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.14.4.1.1.2Columngs2328fQosEgressTagRemarkingModeread-writecurrentthe tag remarking mode for this port. 0:Classified, Use classified PCP/DEI values. 1:Default, Use default PCP/DEI values. 2:Mapped, Use mapped versions of QoS …
1.3.6.1.4.1.2356.800.3.2332.2.14.4.2Tablegs2328fQosPortEgressTagRemarkingDefTablenot-accessiblecurrentconfigure the basic QoS Port Egress Tag Remark Configuration settings for all switch ports.
1.3.6.1.4.1.2356.800.3.2332.2.14.4.2.1Rowgs2328fQosPortEgressTagRemarkingDefEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.14.4.2.1.1Columngs2328fQosEgressTagRemarkingDefPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.14.4.2.1.2Columngs2328fQosEgressTagRemarkingDefPCPread-writecurrentControls the default PCP Range : 0-7
1.3.6.1.4.1.2356.800.3.2332.2.14.4.2.1.3Columngs2328fQosEgressTagRemarkingDefDEIread-writecurrentcontrols the DEI Range 0-1
1.3.6.1.4.1.2356.800.3.2332.2.14.4.4Tablegs2328fQosPortEgressTagRemarkingMapTablenot-accessiblecurrentShow Qos Port Egress Tag Remarking Map.
1.3.6.1.4.1.2356.800.3.2332.2.14.4.4.1Rowgs2328fQosPortEgressTagRemarkingMapEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.14.4.4.1.1Columngs2328fQosPortEgressTagRemarkingMapPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.14.4.4.1.2Columngs2328fQosTagRemarkingQoSClassnot-accessiblecurrentrange: 1-8, QoS Class0: 1, QoS Class1: 2...
1.3.6.1.4.1.2356.800.3.2332.2.14.4.4.1.3Columngs2328fQosTagRemarkingDPLevelnot-accessiblecurrentrange: 1-2, DP Level0: 1, DP Level1: 2.
1.3.6.1.4.1.2356.800.3.2332.2.14.4.4.1.4Columngs2328fQosTagRemarkingPCPread-writecurrentrange: 0-7.
1.3.6.1.4.1.2356.800.3.2332.2.14.4.4.1.5Columngs2328fQosTagRemarkingDEIread-writecurrentrange: 0-1.
1.3.6.1.4.1.2356.800.3.2332.2.14.5Tablegs2328fQosPortDSCPTablenot-accessiblecurrentconfigure the basic QoS Port DSCP Configuration settings for all switch ports.
1.3.6.1.4.1.2356.800.3.2332.2.14.5.1Rowgs2328fQosPortDSCPEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.14.5.1.1Columngs2328fQosPortDSCPPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.14.5.1.2Columngs2328fQosPortDSCPIngressTranslateread-writecurrentConfigure DSCP ingress translation mode. 0: disable, 1: enable, default: disable.
1.3.6.1.4.1.2356.800.3.2332.2.14.5.1.3Columngs2328fQosPortDSCPIngressClassifyread-writecurrentClassification for a port have 4 different values. range: 0-3, 0: disable,No Ingress DSCP Classification. 1: DSCP=0,Classify if incoming (or translated if enab…
1.3.6.1.4.1.2356.800.3.2332.2.14.5.1.4Columngs2328fQosPortDSCPEgressRewriteread-writecurrentConfigure the port egress rewriting mode. range: 0-2 0: Disable,No Egress rewrite. 1: Enable, Rewrite enabled without remapping. 2: Remap DP Unaware , DSCP fro…
1.3.6.1.4.1.2356.800.3.2332.2.14.6Tablegs2328fQosDSCPTablenot-accessiblecurrentconfigure the basic QoS DSCP based QoS Ingress Classification settings for all switches.
1.3.6.1.4.1.2356.800.3.2332.2.14.6.1Rowgs2328fQosDSCPEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.14.6.1.1Columngs2328fQosDSCPListnot-accessiblecurrentDSCP mapping table index(1-64).
1.3.6.1.4.1.2356.800.3.2332.2.14.6.1.2Columngs2328fQosDSCPread-onlycurrentMaximum number of supported DSCP values are 64.
1.3.6.1.4.1.2356.800.3.2332.2.14.6.1.3Columngs2328fQosDSCPTrustread-writecurrentControls whether a specific DSCP value is trusted. Only frames with trusted DSCP values are mapped to a specific QoS class and Drop Precedence Level. Frames wi…
1.3.6.1.4.1.2356.800.3.2332.2.14.6.1.4Columngs2328fQosDSCPQosClassread-writecurrentQoS class. range: 0-7, default: 0.
1.3.6.1.4.1.2356.800.3.2332.2.14.6.1.5Columngs2328fQosDSCPDPLread-writecurrentDrop Precedence Level. range: 0-1, default: disable.
1.3.6.1.4.1.2356.800.3.2332.2.14.7Tablegs2328fQosDSCPTranslationTablenot-accessiblecurrentconfigure the basic QoS DSCP Translation settings for all switches.
1.3.6.1.4.1.2356.800.3.2332.2.14.7.1Rowgs2328fQosDSCPTranslationEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.14.7.1.1Columngs2328fQosDSCPTranslationListnot-accessiblecurrentDSCP translation table index(1-64).
1.3.6.1.4.1.2356.800.3.2332.2.14.7.1.2Columngs2328fQosDSCPTranslationDSCPBasedIdread-writecurrentConfigure global ingress DSCP translation table.
1.3.6.1.4.1.2356.800.3.2332.2.14.7.1.3Columngs2328fQosDSCPTranslationIngressTranslateread-writecurrentDSCP at Ingress side can be translated to any of DSCP values. range: 0-63, default: 0.
1.3.6.1.4.1.2356.800.3.2332.2.14.7.1.4Columngs2328fQosDSCPTranslationIngressClassifyread-writecurrentConfigure DSCP ingress classification. 0: disable, 1: enable, default: disable.
1.3.6.1.4.1.2356.800.3.2332.2.14.7.1.5Columngs2328fQosDSCPTranslationEgressRemapDP0read-writecurrentControls the remapping for frames with DP level 0. Select the DSCP value from select menu to which you want to remap. range: 0-63, default: 0.
1.3.6.1.4.1.2356.800.3.2332.2.14.7.1.6Columngs2328fQosDSCPTranslationEgressRemapDP1read-writecurrentControls the remapping for frames with DP level 1. Select the DSCP value from select menu to which you want to remap. range: 0-63, default: 0.
1.3.6.1.4.1.2356.800.3.2332.2.14.8Tablegs2328fQosDSCPClassificationTablenot-accessiblecurrentconfigure the mapping of QoS class to DSCP value.
1.3.6.1.4.1.2356.800.3.2332.2.14.8.1Rowgs2328fQosDSCPClassificationEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.14.8.1.1Columngs2328fQosDSCPClassificationQoSClassnot-accessiblecurrentActual QoS class. Index 1~8 mean Qos Class 0~7.
1.3.6.1.4.1.2356.800.3.2332.2.14.8.1.2Columngs2328fQosDSCPClassificationDPLnot-accessiblecurrentDPL. Index 1~2 mean DPL 0~1.
1.3.6.1.4.1.2356.800.3.2332.2.14.8.1.3Columngs2328fQosDSCPClassificationDSCPread-writecurrentSelect the classified DSCP value. range: 0-63, default: 0.
1.3.6.1.4.1.2356.800.3.2332.2.14.9Nodegs2328fQosControlList
1.3.6.1.4.1.2356.800.3.2332.2.14.9.1Scalargs2328fQosQceCreateread-writecurrentdefault: 0 0 : None (read only) 1 : Create an Qos entry
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2Tablegs2328fQosQceTablenot-accessiblecurrentCreate Qos QCE entry.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1Rowgs2328fQosQceEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.1Columngs2328fQosQceIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.2Columngs2328fQosQceIDread-writecurrentIf the QCE ID is specified and an entry with this QCE ID already exists, the QCE will be modified. Otherwise, a new QCE will be added. range : 1 - 256.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.3Columngs2328fQosQceNextIDread-writecurrentIf the next QCE ID is non zero, the QCE will be placed before this QCE in the list. If the next QCE ID is zero, the QCE will be placed last in the list. range …
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.4Columngs2328fQosQcePortMembersread-writecurrentIndicates the ingress port of the QCE. Possible values are: All: The QCE will match all ingress port. Port: The QCE will match a specific ingress port.Format: …
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.5Columngs2328fQosQceTagread-writecurrentValue of Tag field can be 'Any', 'Untag' or 'Tag'.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.6Columngs2328fQosQceVIDread-writecurrentValid value of VLAN ID can be any value in 'Specific 1~4094' or 'range 1-4094' or 'Any'.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.7Columngs2328fQosPCPread-writecurrentPriority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.8Columngs2328fQosDEIread-writecurrentDrop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or 'Any'.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.9Columngs2328fQosSMACread-writecurrentSource MAC address: 24 MS bits OUI(00-00-00 ~ FF-FF-FF) or 'Any'.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.10Columngs2328fQosDMACTyperead-writecurrentDestination MAC type: possible values are 'UC'(unicast), 'MC'(multicast), 'BC'(broadcast) or 'Any'.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.11Columngs2328fQosFrameTyperead-writecurrentFrame Type can have any of the following values: 1: Any, 2: Ethernet, 3: LLC, 4: SNAP, 5: IPv4, 6: IPv6.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.12Columngs2328fQosMacEtherTyperead-writecurrentValid ethernet type can have a value within 0x600-0xFFFF or 'Any' , but excluding 0x800(IPv4) and 0x86DD(IPv6), range: 0000-FFFF, default: Any.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.13Columngs2328fQosLLCSSAPAddrread-writecurrentValid SSAP(Source Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.14Columngs2328fQosLLCDSAPAddrread-writecurrentValid DSAP(Destination Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.15Columngs2328fQosLLCControlread-writecurrentValid Control field can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.16Columngs2328fQosSNAPPIDread-writecurrentValid PID(a.k.a ethernet type) can have value within 0x00-0xFFFF or 'Any', range: 0000-FFFF, default: Any.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.17Columngs2328fQosIpv4Protocolread-writecurrentIP protocol number: (Other, TCP or UDP) or 'Any'.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.18Columngs2328fQosIpv4ProtocolValueread-writecurrentIpv4 Protocol is Other. range: 0-255 default: 0.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.19Columngs2328fQosIpv4ProtocolUDPSportread-writecurrentSource TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.20Columngs2328fQosIpv4ProtocolUDPDportread-writecurrentDestination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.21Columngs2328fQosIpv4ProtocolTCPSportread-writecurrentSource TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.22Columngs2328fQosIpv4ProtocolTCPDportread-writecurrentDestination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.23Columngs2328fQosIpv4Ipread-writecurrentSpecific Source IP address in value format or value 0.0.0.0 is 'Any'. if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'. (x.y.z.w),x=0 unless…
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.24Columngs2328fQosIpv4Maskread-writecurrentSpecific IP address in mask format or value 0.0.0.0 is 'Any'.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.25Columngs2328fQosIpv4IPFragmentread-writecurrentIPv4 frame fragmented option: 2: yes, 1: no, 0: any.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.26Columngs2328fQosIpv4DSCPread-writecurrentDiffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.27Columngs2328fQosIpv6Protocolread-writecurrentIP protocol number: (Other, TCP or UDP) or 'Any'.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.28Columngs2328fQosIpv6ProtocolValueread-writecurrentwhen IPv6 protocol is Other , range: 0-255.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.29Columngs2328fQosIpv6ProtocolUDPSportread-writecurrentSource TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.30Columngs2328fQosIpv6ProtocolUDPDportread-writecurrentDestination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.31Columngs2328fQosIpv6ProtocolTCPSportread-writecurrentSource TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.32Columngs2328fQosIpv6ProtocolTCPDportread-writecurrentDestination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.33Columngs2328fQosIpv6Ipread-writecurrentIPv6 source address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits. If a port is configured to match on DMAC/DIP, this field is the Destination IP address.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.34Columngs2328fQosIpv6Maskread-writecurrentIPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.35Columngs2328fQosIpv6DSCPread-writecurrentDiffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF4…
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.36Columngs2328fQosActionClassread-writecurrentQoS class: (0-7) or 8: Default.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.37Columngs2328fQosActionDPLread-writecurrentDP Valid Drop Precedence Level can be (0-3) or 4: Default.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.38Columngs2328fQosActionDSCPread-writecurrentValid DSCP value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or 64: Default.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.2.1.39Columngs2328fQosQceRowStatusread-writecurrent1: active2: notInservice 4: destroy
1.3.6.1.4.1.2356.800.3.2332.2.14.9.3Scalargs2328fQosQceMoveIDread-writecurrentMove Qos, default: 0 Qos ID must be exist. range : 0 - 256.
1.3.6.1.4.1.2356.800.3.2332.2.14.9.4Scalargs2328fQosQceMoveNextIDread-writecurrentMove Qos, default: 0 If the next Qos ID is non zero, the Qos will be placed before this Qos in the list. If the next Qos ID is zero,the Qos will be placed last…
1.3.6.1.4.1.2356.800.3.2332.2.14.10Tablegs2328fQosQCLStatusTablenot-accessiblecurrentconfigure the basic QoS DSCP Translation settings for all switches.
1.3.6.1.4.1.2356.800.3.2332.2.14.10.1Rowgs2328fQosQCLStatusEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.14.10.1.1Columngs2328fQosQCLStatusListnot-accessiblecurrentQCL table index.
1.3.6.1.4.1.2356.800.3.2332.2.14.10.1.2Columngs2328fQosQCLStatusUserread-onlycurrentIndicates the QCL user.
1.3.6.1.4.1.2356.800.3.2332.2.14.10.1.3Columngs2328fQosQCLStatusQCEIdread-onlycurrentIndicates the index of QCE.
1.3.6.1.4.1.2356.800.3.2332.2.14.10.1.4Columngs2328fQosQCLStatusFrameTyperead-onlycurrentIndicates the type of frame to look for incomming frames. Any: The QCE will match all frame type. Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF)…
1.3.6.1.4.1.2356.800.3.2332.2.14.10.1.5Columngs2328fQosQCLStatusPortlistread-onlycurrentIndicates the list of ports configured with the QCE.
1.3.6.1.4.1.2356.800.3.2332.2.14.10.1.6Columngs2328fQosQCLStatusActionClassread-onlycurrentClassified QoS class; if a frame matches the QCE it will be put in the queue.
1.3.6.1.4.1.2356.800.3.2332.2.14.10.1.7Columngs2328fQosQCLStatusActionDPLread-onlycurrentDrop Precedence Level; if a frame matches the QCE then DP level will set to value displayed under DPL column.
1.3.6.1.4.1.2356.800.3.2332.2.14.10.1.8Columngs2328fQosQCLStatusActionDSCPread-onlycurrentIf a frame matches the QCE then DSCP will be classified with the value displayed under DSCP column.
1.3.6.1.4.1.2356.800.3.2332.2.14.10.1.9Columngs2328fQosQCLStatusActionConflictread-onlycurrentIf a frame matches the QCE then DSCP will be classified with the value displayed under DSCP column.
1.3.6.1.4.1.2356.800.3.2332.2.14.11Nodegs2328fQosStormControl
1.3.6.1.4.1.2356.800.3.2332.2.14.11.2Scalargs2328fQoSStormControlUCread-writecurrentEnable or disable the storm control status for the Unicast frame type. default: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.2.14.11.3Scalargs2328fQoSStormControlUCRateread-writecurrentThe rate unit is packets per second (pps). Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K or 1024K.
1.3.6.1.4.1.2356.800.3.2332.2.14.11.4Scalargs2328fQoSStormControlMCread-writecurrentEnable or disable the storm control status for the Multicast frame type. default: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.2.14.11.5Scalargs2328fQoSStormControlMCRateread-writecurrentThe rate unit is packets per second (pps). Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K or 1024K.
1.3.6.1.4.1.2356.800.3.2332.2.14.11.6Scalargs2328fQoSStormControlBCread-writecurrentEnable or disable the storm control status for the Broadcast frame type. default: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.2.14.11.7Scalargs2328fQoSStormControlBCRateread-writecurrentThe rate unit is packets per second (pps). Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K or 1024K.
1.3.6.1.4.1.2356.800.3.2332.2.15Nodegs2328fVlan
1.3.6.1.4.1.2356.800.3.2332.2.15.1Nodegs2328fVlanPorts
1.3.6.1.4.1.2356.800.3.2332.2.15.1.1Scalargs2328fVlanPortsTPIDforCustomSportread-writecurrentConfigure the TPID used for Custom S-ports. This is a global setting for all the Custom S-ports. range: 0x0600-0xffff, default: 0x88a8.
1.3.6.1.4.1.2356.800.3.2332.2.15.1.2Tablegs2328fVlanPortsTablenot-accessiblecurrentConfigure Vlan ports Configuration mode.
1.3.6.1.4.1.2356.800.3.2332.2.15.1.2.1Rowgs2328fVlanPortsEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.15.1.2.1.1Columngs2328fVlanPortsPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.15.1.2.1.2Columngs2328fVlanPortsPVIDread-writecurrentConfigure PVID. range: 1-4094, default: 1.
1.3.6.1.4.1.2356.800.3.2332.2.15.1.2.1.3Columngs2328fVlanPortsFrameTyperead-writecurrentConfigure frame type of switch ports. 0: all, 1: tagged, 2: untagged, default: all.
1.3.6.1.4.1.2356.800.3.2332.2.15.1.2.1.4Columngs2328fVlanPortsIngressFilterread-writecurrentConfigure ingress filtering of switch ports. 0: disable, 1: enable, default:disable .
1.3.6.1.4.1.2356.800.3.2332.2.15.1.2.1.5Columngs2328fVlanPortsEgressRuleread-writecurrentConfigure egress-rule of switch ports. 0: access, 1: hybrid, 2: trunk
1.3.6.1.4.1.2356.800.3.2332.2.15.1.2.1.6Columngs2328fVlanPortsPortTyperead-writecurrentConfigure port type of switch ports. 0: c-port, 1: s-custom-port, 2: s-port, 3: unaware. default: c-port.
1.3.6.1.4.1.2356.800.3.2332.2.15.2Nodegs2328fVlanPrivateVLAN
1.3.6.1.4.1.2356.800.3.2332.2.15.2.1Nodegs2328fVlanPrivateVLANMembership
1.3.6.1.4.1.2356.800.3.2332.2.15.2.1.1Scalargs2328fVlanPrivateVLANMembershipCreateread-writecurrentdefault: 0 0 : None (read only) 1 : Create a pvlan
1.3.6.1.4.1.2356.800.3.2332.2.15.2.1.2Tablegs2328fVlanPrivateVLANMembershipTablenot-accessiblecurrentConfigure Private Vlan Configuration.
1.3.6.1.4.1.2356.800.3.2332.2.15.2.1.2.1Rowgs2328fVlanPrivateVLANMembershipEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.15.2.1.2.1.1Columngs2328fVlanPrivateVLANIndexnot-accessiblecurrentprivate VLAN Index.
1.3.6.1.4.1.2356.800.3.2332.2.15.2.1.2.1.2Columngs2328fVlanPrivateVLANIDread-writecurrentIndicates the ID of this particular private VLAN. The CreateEntry can be modify, the other entry can't be modify.
1.3.6.1.4.1.2356.800.3.2332.2.15.2.1.2.1.3Columngs2328fVlanPrivateVLANMembershipsread-writecurrentTo include the ports in a Private VLAN
1.3.6.1.4.1.2356.800.3.2332.2.15.2.1.2.1.4Columngs2328fVlanPrivateVLANRowStatusread-writecurrent1: active 2: notInservice 4: destroy
1.3.6.1.4.1.2356.800.3.2332.2.15.2.2Tablegs2328fVlanPortIsolationTablenot-accessiblecurrentConfigure Vlan Port Isolation Configuration.
1.3.6.1.4.1.2356.800.3.2332.2.15.2.2.1Rowgs2328fVlanPortIsolationEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.15.2.2.1.1Columngs2328fVlanPortIsolationPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.15.2.2.1.2Columngs2328fVlanPortIsolationread-writecurrentdefault: 0 0:disable 1:enable
1.3.6.1.4.1.2356.800.3.2332.2.15.3Nodegs2328fMACbasedVLAN
1.3.6.1.4.1.2356.800.3.2332.2.15.3.1Nodegs2328fMACbasedVLANConf
1.3.6.1.4.1.2356.800.3.2332.2.15.3.1.1Scalargs2328fMACbasedVLANConfCreateread-writecurrentdefault: 0 0 : None (read only) 1 : Create MAC base vlan
1.3.6.1.4.1.2356.800.3.2332.2.15.3.1.2Tablegs2328fMACbasedVLANConfTablenot-accessiblecurrentConfigure Vlan Port Isolation Configuration.
1.3.6.1.4.1.2356.800.3.2332.2.15.3.1.2.1Rowgs2328fMACbasedVLANConfEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.15.3.1.2.1.1Columngs2328fMACbasedVLANIndexread-writecurrentIndicates the VLAN ID.
1.3.6.1.4.1.2356.800.3.2332.2.15.3.1.2.1.2Columngs2328fMACbasedVLANMACAddressread-writecurrentIndicates the MAC address. The CreateEntry can be modify, the other entry can't be modify.
1.3.6.1.4.1.2356.800.3.2332.2.15.3.1.2.1.3Columngs2328fMACbasedVLANIDread-writecurrentIndicates the VLAN ID.
1.3.6.1.4.1.2356.800.3.2332.2.15.3.1.2.1.4Columngs2328fMACbasedMembershipsread-writecurrentThe ports are displayed for each MAC-based VLAN entry. To include the port in a MAC-based VLAN
1.3.6.1.4.1.2356.800.3.2332.2.15.3.1.2.1.5Columngs2328fMACbaseRowStatusread-writecurrent1: active 2: notInservice 4: destroy
1.3.6.1.4.1.2356.800.3.2332.2.16Nodegs2328fIGMPSnooping
1.3.6.1.4.1.2356.800.3.2332.2.16.1Nodegs2328fIGMPSnoopingBasic
1.3.6.1.4.1.2356.800.3.2332.2.16.1.1Scalargs2328fIGMPSnoopingEnableread-writecurrentEnable/Disable the Global IGMP Snooping
1.3.6.1.4.1.2356.800.3.2332.2.16.1.2Scalargs2328fIGMPSnoopingUnregisteredIPMCv4Floodingread-writecurrentEnable/Disable unregistered IPMCv4 traffic flooding.
1.3.6.1.4.1.2356.800.3.2332.2.16.1.3Scalargs2328fIGMPSnoopingSSMIPRangeAddrread-writecurrentSSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers run the SSM service model for the groups in the address range.
1.3.6.1.4.1.2356.800.3.2332.2.16.1.4Scalargs2328fIGMPSnoopingSSMIPRangeValueread-writecurrentSSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers run the SSM service model for the groups in the address range value.
1.3.6.1.4.1.2356.800.3.2332.2.16.1.5Scalargs2328fIGMPSnoopingProxyEnabledread-writecurrentEnable/Disable IGMP Proxy. This feature can be used to avoid forwarding unnecessary join and leave messages to the router side.
1.3.6.1.4.1.2356.800.3.2332.2.16.1.6Tablegs2328fIGMPSnoopingPortRelatedTablenot-accessiblecurrentConfigure IGMP Snooping Port Related Configuration.
1.3.6.1.4.1.2356.800.3.2332.2.16.1.6.1Rowgs2328fIGMPSnoopingPortRelatedEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.16.1.6.1.1Columngs2328fIGMPSnoopingRouterPortread-writecurrentSpecify which ports act as router ports. A router port is a port on the Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier. If an …
1.3.6.1.4.1.2356.800.3.2332.2.16.1.6.1.2Columngs2328fIGMPSnoopingFastLeaveread-writecurrentEnable/Disable the fast leave on the port.
1.3.6.1.4.1.2356.800.3.2332.2.16.1.6.1.3Columngs2328fIGMPSnoopingThrottlingread-writecurrentEnable to limit the number of multicast groups to which a switch port can belong. 0: unlimited
1.3.6.1.4.1.2356.800.3.2332.2.16.2Tablegs2328fIGMPSnoopingVLANTablenot-accessiblecurrentConfigure IGMP Snooping Vlan Configuration.
1.3.6.1.4.1.2356.800.3.2332.2.16.2.1Rowgs2328fIGMPSnoopingVLANEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.16.2.1.1Columngs2328fIGMPSnoopingVLANIDread-writecurrentThe VLAN ID of the entry
1.3.6.1.4.1.2356.800.3.2332.2.16.2.1.2Columngs2328fIGMPSnoopingVLANEnableread-writecurrentEnable/Disable the per-VLAN IGMP Snooping. Up to 32 VLANs can be selected for IGMP Snooping.
1.3.6.1.4.1.2356.800.3.2332.2.16.2.1.3Columngs2328fIGMPSnoopingVLANIGMPQuerierread-writecurrentEnable/Disable the IGMP Querier in the VLAN.
1.3.6.1.4.1.2356.800.3.2332.2.16.2.1.4Columngs2328fIGMPSnoopingVLANCompatibilityread-writecurrentCompatibility is maintained by hosts and routers taking appropriate actions depending on the versions of IGMP operating on hosts and routers within a network. …
1.3.6.1.4.1.2356.800.3.2332.2.16.2.1.5Columngs2328fIGMPSnoopingVLANRVread-writecurrentRobustness Variable. The Robustness Variable allows tuning for the expected packet loss on a network. The allowed range is 1 to 255, default robustness variabl…
1.3.6.1.4.1.2356.800.3.2332.2.16.2.1.6Columngs2328fIGMPSnoopingVLANQIread-writecurrentQuery Interval. The Query Interval is the interval between General Queries sent by the Querier. The allowed range is 1 to 31744 seconds, default query interval…
1.3.6.1.4.1.2356.800.3.2332.2.16.2.1.7Columngs2328fIGMPSnoopingVLANQRIread-writecurrentQuery Response Interval. The Maximum Response Delay used to calculate the Maximum Response Code inserted into the periodic General Queries. The allowed range i…
1.3.6.1.4.1.2356.800.3.2332.2.16.2.1.8Columngs2328fIGMPSnoopingVLANLLQIread-writecurrentLLQI (LMQI for IGMP). Last Member Query Interval. The Last Member Query Time is the time value represented by the Last Member Query Interval, multiplied by the…
1.3.6.1.4.1.2356.800.3.2332.2.16.2.1.9Columngs2328fIGMPSnoopingVLANURIread-writecurrentUnsolicited Report Interval. The Unsolicited Report Interval is the time between repetitions of a host's initial report of membership in a group. The allowed r…
1.3.6.1.4.1.2356.800.3.2332.2.16.3Nodegs2328fIGMPSnoopingPortGroupFiltering
1.3.6.1.4.1.2356.800.3.2332.2.16.3.1Scalargs2328fIGMPSnoopingPortGroupFilteringCreateread-writecurrentdefault: 0 0 : None (read only) 1 : Create IGMP Snooping Port Group Filtering
1.3.6.1.4.1.2356.800.3.2332.2.16.3.2Tablegs2328fIGMPSnoopingPortGroupFilteringTablenot-accessiblecurrentConfigure IGMP Snooping port group filtering.
1.3.6.1.4.1.2356.800.3.2332.2.16.3.2.1Rowgs2328fIGMPSnoopingPortGroupFilteringEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.16.3.2.1.1Columngs2328fIGMPSnoopingPortGroupFilteringIndexnot-accessiblecurrentIGMP Snooping Port Group Filtering Configuration Index.
1.3.6.1.4.1.2356.800.3.2332.2.16.3.2.1.2Columngs2328fIGMPSnoopingPortGroupFilteringPortread-writecurrentThe logical port for the settings.
1.3.6.1.4.1.2356.800.3.2332.2.16.3.2.1.3Columngs2328fIGMPSnoopingPortGroupFilteringGroupsread-writecurrentThe IP Multicast Group that will be filtered.
1.3.6.1.4.1.2356.800.3.2332.2.16.3.2.1.4Columngs2328fIGMPSnoopingPortGroupFilteringRowStatusread-writecurrent1: active 2: notInservice 4: destroy
1.3.6.1.4.1.2356.800.3.2332.2.16.4Nodegs2328fIGMPSnoopingStatus
1.3.6.1.4.1.2356.800.3.2332.2.16.4.1Scalargs2328fIGMPSnoopingstatisticClearread-writecurrentClears all Statistics counters.
1.3.6.1.4.1.2356.800.3.2332.2.16.4.2Tablegs2328fIGMPSnoopingstatisticTablenot-accessiblecurrentConfigure Vlan Port Isolation Configuration.
1.3.6.1.4.1.2356.800.3.2332.2.16.4.2.1Rowgs2328fIGMPSnoopingstatisticEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.16.4.2.1.1Columngs2328fIGMPSnoopingstatisticVLANIDread-onlycurrentThe VLAN ID of the entry.
1.3.6.1.4.1.2356.800.3.2332.2.16.4.2.1.2Columngs2328fIGMPSnoopingstatisticQuerierVersionread-onlycurrentWorking Querier Version currently.
1.3.6.1.4.1.2356.800.3.2332.2.16.4.2.1.3Columngs2328fIGMPSnoopingstatisticHostVersionread-onlycurrentWorking Host Version currently.
1.3.6.1.4.1.2356.800.3.2332.2.16.4.2.1.4Columngs2328fIGMPSnoopingstatisticQuerierStatusread-onlycurrentShows the Querier status is ACTIVE or IDLE. DISABLE denotes the specific interface is administratively disabled.
1.3.6.1.4.1.2356.800.3.2332.2.16.4.2.1.5Columngs2328fIGMPSnoopingstatisticQueriesTransmittedread-onlycurrentThe number of Transmitted Queries.
1.3.6.1.4.1.2356.800.3.2332.2.16.4.2.1.6Columngs2328fIGMPSnoopingstatisticQueriesReceivedread-onlycurrentThe number of Received Queries.
1.3.6.1.4.1.2356.800.3.2332.2.16.4.2.1.7Columngs2328fIGMPSnoopingstatisticV1ReportsReceivedread-onlycurrentThe number of Received V1 Reports.
1.3.6.1.4.1.2356.800.3.2332.2.16.4.2.1.8Columngs2328fIGMPSnoopingstatisticV2ReportsReceivedread-onlycurrentThe number of Received V2 Reports.
1.3.6.1.4.1.2356.800.3.2332.2.16.4.2.1.9Columngs2328fIGMPSnoopingstatisticV3ReportsReceivedread-onlycurrentThe number of Received V3 Reports.
1.3.6.1.4.1.2356.800.3.2332.2.16.4.2.1.10Columngs2328fIGMPSnoopingstatisticV2LeavesReceivedread-onlycurrentThe number of Received V2 Leaves.
1.3.6.1.4.1.2356.800.3.2332.2.16.4.3Tablegs2328fIGMPSnoopingRouterPortTablenot-accessiblecurrentConfigure Vlan Port Isolation Configuration.
1.3.6.1.4.1.2356.800.3.2332.2.16.4.3.1Rowgs2328fIGMPSnoopingRouterPortEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.16.4.3.1.1Columngs2328fIGMPSnoopingRouterPortStatusread-onlycurrentDisplay which ports act as router ports. A router port is a port on the Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier. Static…
1.3.6.1.4.1.2356.800.3.2332.2.16.5Tablegs2328fIGMPSnoopingGroupsTablenot-accessiblecurrentIGMP Snooping Groups Information .
1.3.6.1.4.1.2356.800.3.2332.2.16.5.1Rowgs2328fIGMPSnoopingGroupsEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.16.5.1.1Columngs2328fIGMPSnoopingGroupsIndexnot-accessiblecurrentIGMP Snooping Groups Index
1.3.6.1.4.1.2356.800.3.2332.2.16.5.1.2Columngs2328fIGMPSnoopingGroupsVLANIDread-onlycurrentVLAN ID of the group.
1.3.6.1.4.1.2356.800.3.2332.2.16.5.1.3Columngs2328fIGMPSnoopingGroupsread-onlycurrentGroup address of the group displayed.
1.3.6.1.4.1.2356.800.3.2332.2.16.5.1.4Columngs2328fIGMPSnoopingGroupsMembershipsread-onlycurrentPorts under this group.
1.3.6.1.4.1.2356.800.3.2332.2.16.6Tablegs2328fIGMPSnoopingSSMTablenot-accessiblecurrentThe IGMP SFM (Source-Filtered Multicast) Information Table also contains the SSM (Source-Specific Multicast) information. This table is sorted first by VLAN ID…
1.3.6.1.4.1.2356.800.3.2332.2.16.6.1Rowgs2328fIGMPSnoopingSSMEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.16.6.1.1Columngs2328fIGMPSnoopingSSMIndexnot-accessiblecurrentIGMP Snooping SSM Index
1.3.6.1.4.1.2356.800.3.2332.2.16.6.1.2Columngs2328fIGMPSnoopingSSMVLANIDread-onlycurrentVLAN ID of the group.
1.3.6.1.4.1.2356.800.3.2332.2.16.6.1.3Columngs2328fIGMPSnoopingSSMGroupread-onlycurrentGroup address of the group displayed.
1.3.6.1.4.1.2356.800.3.2332.2.16.6.1.4Columngs2328fIGMPSnoopingSSMPortread-onlycurrentPorts under this group.
1.3.6.1.4.1.2356.800.3.2332.2.16.6.1.5Columngs2328fIGMPSnoopingSSMModeread-onlycurrentIndicates the filtering mode maintained per (VLAN ID, port number, Group Address) basis. It can be either Include or Exclude.
1.3.6.1.4.1.2356.800.3.2332.2.16.6.1.6Columngs2328fIGMPSnoopingSSMSourceAddressread-onlycurrentIP Address of the source. Currently, system limits the total number of IP source addresses for filtering to be 128.
1.3.6.1.4.1.2356.800.3.2332.2.16.6.1.7Columngs2328fIGMPSnoopingSSMTyperead-onlycurrentIndicates the Type. It can be either Allow or Deny.
1.3.6.1.4.1.2356.800.3.2332.2.17Nodegs2328fMLDSnooping
1.3.6.1.4.1.2356.800.3.2332.2.17.1Nodegs2328fMLDSnoopingBasic
1.3.6.1.4.1.2356.800.3.2332.2.17.1.1Scalargs2328fMLDSnoopingEnableread-writecurrentEnable/Disable the Global MLD Snooping
1.3.6.1.4.1.2356.800.3.2332.2.17.1.2Scalargs2328fMLDSnoopingUnregisteredIPMCv6Floodingread-writecurrentEnable/Disable unregistered IPMCv6 traffic flooding.
1.3.6.1.4.1.2356.800.3.2332.2.17.1.3Scalargs2328fMLDSnoopingSSMIPRangeAddrread-writecurrentSSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers run the SSM service model for the groups in the address range.
1.3.6.1.4.1.2356.800.3.2332.2.17.1.4Scalargs2328fMLDSnoopingSSMIPRangeValueread-writecurrentSSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers run the SSM service model for the groups in the address range value.
1.3.6.1.4.1.2356.800.3.2332.2.17.1.5Scalargs2328fMLDSnoopingProxyEnabledread-writecurrentEnable/Disable MLD Proxy. This feature can be used to avoid forwarding unnecessary join and leave messages to the router side.
1.3.6.1.4.1.2356.800.3.2332.2.17.1.6Tablegs2328fMLDSnoopingPortRelatedTablenot-accessiblecurrentConfigure MLD Snooping Port Related Configuration.
1.3.6.1.4.1.2356.800.3.2332.2.17.1.6.1Rowgs2328fMLDSnoopingPortRelatedEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.17.1.6.1.1Columngs2328fMLDSnoopingRouterPortread-writecurrentSpecify which ports act as router ports. A router port is a port on the Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier. If an …
1.3.6.1.4.1.2356.800.3.2332.2.17.1.6.1.2Columngs2328fMLDSnoopingFastLeaveread-writecurrentEnable/Disable the fast leave on the port.
1.3.6.1.4.1.2356.800.3.2332.2.17.1.6.1.3Columngs2328fMLDSnoopingThrottlingread-writecurrentEnable to limit the number of multicast groups to which a switch port can belong. 0: unlimited
1.3.6.1.4.1.2356.800.3.2332.2.17.2Tablegs2328fMLDSnoopingVLANTablenot-accessiblecurrentConfigure MLD Snooping Vlan Configuration.
1.3.6.1.4.1.2356.800.3.2332.2.17.2.1Rowgs2328fMLDSnoopingVLANEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.17.2.1.1Columngs2328fMLDSnoopingVLANIDread-writecurrentThe VLAN ID of the entry
1.3.6.1.4.1.2356.800.3.2332.2.17.2.1.2Columngs2328fMLDSnoopingVLANEnableread-writecurrentEnable/Disable the per-VLAN MLD Snooping. Up to 32 VLANs can be selected for MLD Snooping.
1.3.6.1.4.1.2356.800.3.2332.2.17.2.1.3Columngs2328fMLDSnoopingVLANIGMPQuerierread-writecurrentEnable/Disable the MLD Querier in the VLAN.
1.3.6.1.4.1.2356.800.3.2332.2.17.2.1.4Columngs2328fMLDSnoopingVLANCompatibilityread-writecurrentCompatibility is maintained by hosts and routers taking appropriate actions depending on the versions of IGMP operating on hosts and routers within a network. …
1.3.6.1.4.1.2356.800.3.2332.2.17.2.1.5Columngs2328fMLDSnoopingVLANRVread-writecurrentRobustness Variable. The Robustness Variable allows tuning for the expected packet loss on a network. The allowed range is 1 to 255, default robustness variabl…
1.3.6.1.4.1.2356.800.3.2332.2.17.2.1.6Columngs2328fMLDSnoopingVLANQIread-writecurrentQuery Interval. The Query Interval is the interval between General Queries sent by the Querier. The allowed range is 1 to 31744 seconds, default query interval…
1.3.6.1.4.1.2356.800.3.2332.2.17.2.1.7Columngs2328fMLDSnoopingVLANQRIread-writecurrentQuery Response Interval. The Maximum Response Delay used to calculate the Maximum Response Code inserted into the periodic General Queries. The allowed range i…
1.3.6.1.4.1.2356.800.3.2332.2.17.2.1.8Columngs2328fMLDSnoopingVLANLLQIread-writecurrentLLQI (LMQI for MLD). Last Member Query Interval. The Last Member Query Time is the time value represented by the Last Member Query Interval, multiplied by the …
1.3.6.1.4.1.2356.800.3.2332.2.17.2.1.9Columngs2328fMLDSnoopingVLANURIread-writecurrentUnsolicited Report Interval. The Unsolicited Report Interval is the time between repetitions of a host's initial report of membership in a group. The allowed r…
1.3.6.1.4.1.2356.800.3.2332.2.17.3Nodegs2328fMLDSnoopingPortGroupFiltering
1.3.6.1.4.1.2356.800.3.2332.2.17.3.1Scalargs2328fMLDSnoopingPortGroupFilteringCreateread-writecurrentdefault: 0 0 : None (read only) 1 : Create MLD Snooping Port Group Filtering
1.3.6.1.4.1.2356.800.3.2332.2.17.3.2Tablegs2328fMLDSnoopingPortGroupFilteringTablenot-accessiblecurrentConfigure MLD Snooping port group filtering.
1.3.6.1.4.1.2356.800.3.2332.2.17.3.2.1Rowgs2328fMLDSnoopingPortGroupFilteringEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.17.3.2.1.1Columngs2328fMLDSnoopingPortGroupFilteringIndexnot-accessiblecurrentMLD Snooping Port Group Filtering Configuration Index.
1.3.6.1.4.1.2356.800.3.2332.2.17.3.2.1.2Columngs2328fMLDSnoopingPortGroupFilteringPortread-writecurrentThe logical port for the settings.
1.3.6.1.4.1.2356.800.3.2332.2.17.3.2.1.3Columngs2328fMLDSnoopingPortGroupFilteringGroupsread-writecurrentThe IP Multicast Group that will be filtered.
1.3.6.1.4.1.2356.800.3.2332.2.17.3.2.1.4Columngs2328fMLDSnoopingPortGroupFilteringRowStatusread-writecurrent1: active 2: notInservice 4: destroy
1.3.6.1.4.1.2356.800.3.2332.2.17.4Nodegs2328fMLDSnoopingStatus
1.3.6.1.4.1.2356.800.3.2332.2.17.4.1Scalargs2328fMLDSnoopingstatisticClearread-writecurrentClears all Statistics counters.
1.3.6.1.4.1.2356.800.3.2332.2.17.4.2Tablegs2328fMLDSnoopingstatisticTablenot-accessiblecurrentConfigure Vlan Port Isolation Configuration.
1.3.6.1.4.1.2356.800.3.2332.2.17.4.2.1Rowgs2328fMLDSnoopingstatisticEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.17.4.2.1.1Columngs2328fMLDSnoopingstatisticVLANIDread-onlycurrentThe VLAN ID of the entry.
1.3.6.1.4.1.2356.800.3.2332.2.17.4.2.1.2Columngs2328fMLDSnoopingstatisticQuerierVersionread-onlycurrentWorking Querier Version currently.
1.3.6.1.4.1.2356.800.3.2332.2.17.4.2.1.3Columngs2328fMLDSnoopingstatisticHostVersionread-onlycurrentWorking Host Version currently.
1.3.6.1.4.1.2356.800.3.2332.2.17.4.2.1.4Columngs2328fMLDSnoopingstatisticQuerierStatusread-onlycurrentShows the Querier status is ACTIVE or IDLE. DISABLE denotes the specific interface is administratively disabled.
1.3.6.1.4.1.2356.800.3.2332.2.17.4.2.1.5Columngs2328fMLDSnoopingstatisticQueriesTransmittedread-onlycurrentThe number of Transmitted Queries.
1.3.6.1.4.1.2356.800.3.2332.2.17.4.2.1.6Columngs2328fMLDSnoopingstatisticQueriesReceivedread-onlycurrentThe number of Received Queries.
1.3.6.1.4.1.2356.800.3.2332.2.17.4.2.1.7Columngs2328fMLDSnoopingstatisticV1ReportsReceivedread-onlycurrentThe number of Received V1 Reports.
1.3.6.1.4.1.2356.800.3.2332.2.17.4.2.1.8Columngs2328fMLDSnoopingstatisticV2ReportsReceivedread-onlycurrentThe number of Received V2 Reports.
1.3.6.1.4.1.2356.800.3.2332.2.17.4.2.1.9Columngs2328fMLDSnoopingstatisticV1LeavesReceivedread-onlycurrentThe number of Received V1 Leaves.
1.3.6.1.4.1.2356.800.3.2332.2.17.4.3Tablegs2328fMLDSnoopingRouterPortTablenot-accessiblecurrentConfigure Vlan Port Isolation Configuration.
1.3.6.1.4.1.2356.800.3.2332.2.17.4.3.1Rowgs2328fMLDSnoopingRouterPortEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.17.4.3.1.1Columngs2328fMLDSnoopingRouterPortStatusread-onlycurrentDisplay which ports act as router ports. A router port is a port on the Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier. Static…
1.3.6.1.4.1.2356.800.3.2332.2.17.5Tablegs2328fMLDSnoopingGroupsTablenot-accessiblecurrentMLD Snooping Groups Information .
1.3.6.1.4.1.2356.800.3.2332.2.17.5.1Rowgs2328fMLDSnoopingGroupsEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.17.5.1.1Columngs2328fMLDSnoopingGroupsIndexnot-accessiblecurrentMLD Snooping Groups Index
1.3.6.1.4.1.2356.800.3.2332.2.17.5.1.2Columngs2328fMLDSnoopingGroupsVLANIDread-onlycurrentVLAN ID of the group.
1.3.6.1.4.1.2356.800.3.2332.2.17.5.1.3Columngs2328fMLDSnoopingGroupsread-onlycurrentGroup address of the group displayed.
1.3.6.1.4.1.2356.800.3.2332.2.17.5.1.4Columngs2328fMLDSnoopingGroupsMembershipsread-onlycurrentPorts under this group.
1.3.6.1.4.1.2356.800.3.2332.2.17.6Tablegs2328fMLDSnoopingSSMTablenot-accessiblecurrentThe MLD SFM (Source-Filtered Multicast) Information Table also contains the SSM (Source-Specific Multicast) information. This table is sorted first by VLAN ID,…
1.3.6.1.4.1.2356.800.3.2332.2.17.6.1Rowgs2328fMLDSnoopingSSMEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.17.6.1.1Columngs2328fMLDSnoopingSSMIndexnot-accessiblecurrentMLD Snooping SSM Index
1.3.6.1.4.1.2356.800.3.2332.2.17.6.1.2Columngs2328fMLDSnoopingSSMVLANIDread-onlycurrentVLAN ID of the group.
1.3.6.1.4.1.2356.800.3.2332.2.17.6.1.3Columngs2328fMLDSnoopingSSMGroupread-onlycurrentGroup address of the group displayed.
1.3.6.1.4.1.2356.800.3.2332.2.17.6.1.4Columngs2328fMLDSnoopingSSMPortread-onlycurrentPorts under this group.
1.3.6.1.4.1.2356.800.3.2332.2.17.6.1.5Columngs2328fMLDSnoopingSSMModeread-onlycurrentIndicates the filtering mode maintained per (VLAN ID, port number, Group Address) basis. It can be either Include or Exclude.
1.3.6.1.4.1.2356.800.3.2332.2.17.6.1.6Columngs2328fMLDSnoopingSSMSourceAddressread-onlycurrentIP Address of the source. Currently, system limits the total number of IP source addresses for filtering to be 128.
1.3.6.1.4.1.2356.800.3.2332.2.17.6.1.7Columngs2328fMLDSnoopingSSMTyperead-onlycurrentIndicates the Type. It can be either Allow or Deny.
1.3.6.1.4.1.2356.800.3.2332.2.18Nodegs2328fMVR
1.3.6.1.4.1.2356.800.3.2332.2.18.1Nodegs2328fMVRConfiguration
1.3.6.1.4.1.2356.800.3.2332.2.18.1.1Scalargs2328fMVRModeread-writecurrentEnable/Disable the Global MVR.
1.3.6.1.4.1.2356.800.3.2332.2.18.1.2Scalargs2328fMVRVLANIdread-writecurrentSpecify the Multicast VLAN ID.
1.3.6.1.4.1.2356.800.3.2332.2.18.1.3Tablegs2328fMVRPortConfigurationTablenot-accessiblecurrentConfigure MVR Port Configuration.
1.3.6.1.4.1.2356.800.3.2332.2.18.1.3.1Rowgs2328fMVRPortConfigurationEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.18.1.3.1.1Columngs2328fMVRPortConfigurationModeread-writecurrentEnable MVR on the port.
1.3.6.1.4.1.2356.800.3.2332.2.18.1.3.1.2Columngs2328fMVRPortConfigurationTyperead-writecurrentSpecify the MVR port type on the port.
1.3.6.1.4.1.2356.800.3.2332.2.18.1.3.1.3Columngs2328fMVRPortConfigurationImmediateLeaveread-writecurrentEnable the fast leave on the port.
1.3.6.1.4.1.2356.800.3.2332.2.18.2Nodegs2328fMVRPortGroupFiltering
1.3.6.1.4.1.2356.800.3.2332.2.18.2.1Scalargs2328fMVRPortGroupFilteringCreateread-writecurrentdefault: 0 0 : None (read only) 1 : Create MLD Snooping Port Group Filtering
1.3.6.1.4.1.2356.800.3.2332.2.18.2.2Tablegs2328fMVRPortGroupFilteringTablenot-accessiblecurrentConfigure MVR port group filtering.
1.3.6.1.4.1.2356.800.3.2332.2.18.2.2.1Rowgs2328fMVRPortGroupFilteringEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.18.2.2.1.1Columngs2328fMVRPortGroupFilteringIndexnot-accessiblecurrentMVR Port Group Filtering Configuration Index.
1.3.6.1.4.1.2356.800.3.2332.2.18.2.2.1.2Columngs2328fMVRPortGroupFilteringPortread-writecurrentThe logical port for the settings.
1.3.6.1.4.1.2356.800.3.2332.2.18.2.2.1.3Columngs2328fMVRPortGroupFilteringStartGroupsread-writecurrentThe IP Multicast Group that will be allowed.
1.3.6.1.4.1.2356.800.3.2332.2.18.2.2.1.4Columngs2328fMVRPortGroupFilteringEndGroupsread-writecurrentThe IP Multicast Group that will be allowed.
1.3.6.1.4.1.2356.800.3.2332.2.18.2.2.1.5Columngs2328fMVRPortGroupFilteringRowStatusread-writecurrent1: active 2: notInservice 4: destroy
1.3.6.1.4.1.2356.800.3.2332.2.18.3Tablegs2328fMVRGroupsTablenot-accessiblecurrentMVR Groups Information .
1.3.6.1.4.1.2356.800.3.2332.2.18.3.1Rowgs2328fMVRGroupsEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.18.3.1.1Columngs2328fMVRGroupsIndexnot-accessiblecurrentMVR Groups Index
1.3.6.1.4.1.2356.800.3.2332.2.18.3.1.2Columngs2328fMVRGroupsVLANIDread-onlycurrentVLAN ID of the group.
1.3.6.1.4.1.2356.800.3.2332.2.18.3.1.3Columngs2328fMVRGroupsread-onlycurrentGroup address of the group displayed.
1.3.6.1.4.1.2356.800.3.2332.2.18.3.1.4Columngs2328fMVRGroupsMembershipsread-onlycurrentPorts under this group.
1.3.6.1.4.1.2356.800.3.2332.2.18.4Nodegs2328fMVRStatus
1.3.6.1.4.1.2356.800.3.2332.2.18.4.1Scalargs2328fMVRstatisticClearread-writecurrentClears all Statistics counters.
1.3.6.1.4.1.2356.800.3.2332.2.18.4.2Scalargs2328fMVRstatisticVLANIDread-onlycurrentThe VLAN ID of the entry.
1.3.6.1.4.1.2356.800.3.2332.2.18.4.3Scalargs2328fMVRstatisticV1ReportsReceivedread-onlycurrentThe number of Received V1 Reports.
1.3.6.1.4.1.2356.800.3.2332.2.18.4.4Scalargs2328fMVRstatisticV2ReportsReceivedread-onlycurrentThe number of Received V2 Reports.
1.3.6.1.4.1.2356.800.3.2332.2.18.4.5Scalargs2328fMVRstatisticV3ReportsReceivedread-onlycurrentThe number of Received V3 Reports.
1.3.6.1.4.1.2356.800.3.2332.2.18.4.6Scalargs2328fMVRstatisticV2LeavesReceivedread-onlycurrentThe number of Received V2 Leaves.
1.3.6.1.4.1.2356.800.3.2332.2.19Nodegs2328fLACP
1.3.6.1.4.1.2356.800.3.2332.2.19.1Nodegs2328fLACPConf
1.3.6.1.4.1.2356.800.3.2332.2.19.1.1Tablegs2328fLACPPortConfigurationTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.19.1.1.1Rowgs2328fLACPPortConfigurationEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.19.1.1.1.1Columngs2328fLACPPortConfigurationPortnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.19.1.1.1.2Columngs2328fLACPPortConfigurationModeread-writecurrentEnable/Disable LACP Mode.
1.3.6.1.4.1.2356.800.3.2332.2.19.1.1.1.3Columngs2328fLACPPortConfigurationKeyread-writecurrentLACP key : 1-65535. 0 : Auto
1.3.6.1.4.1.2356.800.3.2332.2.19.1.1.1.4Columngs2328fLACPPortConfigurationRoleread-writecurrent0 : passive, Listen for LACP packets. 1 : active, Initiate LACP negotiation, and transmit LACP packets each second
1.3.6.1.4.1.2356.800.3.2332.2.19.2Tablegs2328fLACPSystemStatusTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.19.2.1Rowgs2328fLACPSystemStatusEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.19.2.1.1Columngs2328fLACPSystemStatusIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.19.2.1.2Columngs2328fLACPSystemStatusAggrIDread-onlycurrentThe Aggregation ID associated with this aggregation instance.
1.3.6.1.4.1.2356.800.3.2332.2.19.2.1.3Columngs2328fLACPSystemStatusPartnerSystemIDread-onlycurrentThe system ID (MAC address) of the aggregation partner.
1.3.6.1.4.1.2356.800.3.2332.2.19.2.1.4Columngs2328fLACPSystemStatusPartnerKeyread-onlycurrentThe Key that the partner has assigned to this aggregation ID.
1.3.6.1.4.1.2356.800.3.2332.2.19.2.1.5Columngs2328fLACPSystemStatusLastchangedread-onlycurrentThe time since this aggregation changed.
1.3.6.1.4.1.2356.800.3.2332.2.19.2.1.6Columngs2328fLACPSystemStatusLocalPortsread-onlycurrentShows which ports are a part of this aggregation for this switch.
1.3.6.1.4.1.2356.800.3.2332.2.19.3Tablegs2328fLACPStatusTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.19.3.1Rowgs2328fLACPStatusEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.19.3.1.1Columngs2328fLACPStatusPortnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.19.3.1.2Columngs2328fLACPStatusLACPread-onlycurrentEnabled means that LACP is enabled and the port link is up. Disabled means that LACP is not enabled or that the port link is down. Backup means that the port c…
1.3.6.1.4.1.2356.800.3.2332.2.19.3.1.3Columngs2328fLACPStatusKeyread-onlycurrentThe key assigned to this port. Only ports with the same key can aggregate together.
1.3.6.1.4.1.2356.800.3.2332.2.19.3.1.4Columngs2328fLACPStatusAggrIDread-onlycurrentThe Aggregation ID assigned to this aggregation group.
1.3.6.1.4.1.2356.800.3.2332.2.19.3.1.5Columngs2328fLACPStatusPartnerSystemIDread-onlycurrentThe partner's System ID.
1.3.6.1.4.1.2356.800.3.2332.2.19.3.1.6Columngs2328fLACPStatusPartnerPortread-onlycurrentThe partner's port number connected to this port.
1.3.6.1.4.1.2356.800.3.2332.2.19.4Tablegs2328fLACPStatisticsTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.19.4.1Rowgs2328fLACPStatisticsEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.19.4.1.1Columngs2328fLACPStatisticsPortnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.19.4.1.2Columngs2328fLACPReceivedread-onlycurrentShows how many LACP frames have been received at each port.
1.3.6.1.4.1.2356.800.3.2332.2.19.4.1.3Columngs2328fLACPTransmittedread-onlycurrentShows how many LACP frames have been sent from each port.
1.3.6.1.4.1.2356.800.3.2332.2.19.4.1.4Columngs2328fLACPDiscardedUnknownread-onlycurrentShows how many unknown LACP frames have been discarded at each port.
1.3.6.1.4.1.2356.800.3.2332.2.19.4.1.5Columngs2328fLACPDiscardedIllegalread-onlycurrentShows how many illegal LACP frames have been discarded at each port.
1.3.6.1.4.1.2356.800.3.2332.2.19.5Scalargs2328fLACPStatisticsClearread-writecurrentdefault: 0 0: none 1: clear
1.3.6.1.4.1.2356.800.3.2332.2.20Nodegs2328fSTP
1.3.6.1.4.1.2356.800.3.2332.2.20.1Nodegs2328fSTPBridgeBasicConf
1.3.6.1.4.1.2356.800.3.2332.2.20.1.1Scalargs2328fSTPBridgeProtocolVersionread-writecurrentdefault: 3, 0: stp 2: rstp 3: mstp
1.3.6.1.4.1.2356.800.3.2332.2.20.1.2Scalargs2328fSTPBridgePriorityread-writecurrentdefault: 32768, STP bridge priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)
1.3.6.1.4.1.2356.800.3.2332.2.20.1.3Scalargs2328fSTPBridgeForwardDelayread-writecurrentForward Delay default: 15, range: 4 - 30. MaxAge must be <= (FwdDelay-1)*2.
1.3.6.1.4.1.2356.800.3.2332.2.20.1.4Scalargs2328fSTPBridgeMaxAgeread-writecurrentMax Age default: 20, range: 6 - 40. MaxAge must be <= (FwdDelay-1)*2
1.3.6.1.4.1.2356.800.3.2332.2.20.1.5Scalargs2328fSTPBridgeMaximumHopCountread-writecurrentMaximum Hop Count default: 20, range: 6 - 40.
1.3.6.1.4.1.2356.800.3.2332.2.20.1.6Scalargs2328fSTPBridgeTransmitHoldCountread-writecurrentTransmit Hold Count default: 6, range: 1 - 10.
1.3.6.1.4.1.2356.800.3.2332.2.20.2Nodegs2328fSTPBridgeAdvancedConf
1.3.6.1.4.1.2356.800.3.2332.2.20.2.1Scalargs2328fSTPBridgeEdgePortBPDUFilteringread-writecurrentdefault: 0, 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.2.20.2.2Scalargs2328fSTPBridgeEdgePortBPDUGuardread-writecurrentdefault: 0, 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.2.20.2.3Scalargs2328fSTPBridgePortErrorRecoveryTimeoutread-writecurrentPort Error Recovery Timeout disable: 0, range: 30 - 86400.
1.3.6.1.4.1.2356.800.3.2332.2.20.3Nodegs2328fSTPMSTIConf
1.3.6.1.4.1.2356.800.3.2332.2.20.3.1Scalargs2328fSTPMSTIConfigurationNameread-writecurrentA text string up to 32 characters long.
1.3.6.1.4.1.2356.800.3.2332.2.20.3.2Scalargs2328fSTPMSTIConfigurationRevisionread-writecurrentConfiguration Revision default: 0, range: 0 - 65535.
1.3.6.1.4.1.2356.800.3.2332.2.20.4Nodegs2328fSTPMSTIMappingConf
1.3.6.1.4.1.2356.800.3.2332.2.20.4.1Scalargs2328fSTPMSTI1VLANsMappedread-writecurrentThe list of VLANs mapped to the MSTI1. The VLANs must be separated with comma or space. An unused MSTI should just be left empty.
1.3.6.1.4.1.2356.800.3.2332.2.20.4.2Scalargs2328fSTPMSTI2VLANsMappedread-writecurrentThe list of VLANs mapped to the MSTI2. The VLANs must be separated with comma or space. An unused MSTI should just be left empty.
1.3.6.1.4.1.2356.800.3.2332.2.20.4.3Scalargs2328fSTPMSTI3VLANsMappedread-writecurrentThe list of VLANs mapped to the MSTI3. The VLANs must be separated with comma or space. An unused MSTI should just be left empty.
1.3.6.1.4.1.2356.800.3.2332.2.20.4.4Scalargs2328fSTPMSTI4VLANsMappedread-writecurrentThe list of VLANs mapped to the MSTI4. The VLANs must be separated with comma or space. An unused MSTI should just be left empty.
1.3.6.1.4.1.2356.800.3.2332.2.20.4.5Scalargs2328fSTPMSTI5VLANsMappedread-writecurrentThe list of VLANs mapped to the MSTI5. The VLANs must be separated with comma or space. An unused MSTI should just be left empty.
1.3.6.1.4.1.2356.800.3.2332.2.20.4.6Scalargs2328fSTPMSTI6VLANsMappedread-writecurrentThe list of VLANs mapped to the MSTI6. The VLANs must be separated with comma or space. An unused MSTI should just be left empty.
1.3.6.1.4.1.2356.800.3.2332.2.20.4.7Scalargs2328fSTPMSTI7VLANsMappedread-writecurrentThe list of VLANs mapped to the MSTI7. The VLANs must be separated with comma or space. An unused MSTI should just be left empty.
1.3.6.1.4.1.2356.800.3.2332.2.20.5Nodegs2328fSTPMSTIPriority
1.3.6.1.4.1.2356.800.3.2332.2.20.5.1Scalargs2328fSTPCISTPriorityread-writecurrentdefault: 32768, STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)
1.3.6.1.4.1.2356.800.3.2332.2.20.5.2Scalargs2328fSTPMSTI1Priorityread-writecurrentdefault: 32768, STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)
1.3.6.1.4.1.2356.800.3.2332.2.20.5.3Scalargs2328fSTPMSTI2Priorityread-writecurrentdefault: 32768, STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)
1.3.6.1.4.1.2356.800.3.2332.2.20.5.4Scalargs2328fSTPMSTI3Priorityread-writecurrentdefault: 32768, STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)
1.3.6.1.4.1.2356.800.3.2332.2.20.5.5Scalargs2328fSTPMSTI4Priorityread-writecurrentdefault: 32768, STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)
1.3.6.1.4.1.2356.800.3.2332.2.20.5.6Scalargs2328fSTPMSTI5Priorityread-writecurrentdefault: 32768, STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)
1.3.6.1.4.1.2356.800.3.2332.2.20.5.7Scalargs2328fSTPMSTI6Priorityread-writecurrentdefault: 32768, STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)
1.3.6.1.4.1.2356.800.3.2332.2.20.5.8Scalargs2328fSTPMSTI7Priorityread-writecurrentdefault: 32768, STP CIST priority (0/4096/8192/12288/16384/20480/24576/28672/32768/36864/40960/45056/49152/53248/57344/61440)
1.3.6.1.4.1.2356.800.3.2332.2.20.6Nodegs2328fSTPCISTPort
1.3.6.1.4.1.2356.800.3.2332.2.20.6.1Nodegs2328fSTPCISTAggregatedPort
1.3.6.1.4.1.2356.800.3.2332.2.20.6.1.1Scalargs2328fSTPCISTAggregatedPortSTPEnabledread-writecurrentdefault: 0, 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.2.20.6.1.2Scalargs2328fSTPCISTAggregatedPortPathCostread-writecurrentAuto: 0, Specific Path Cost range: 1 - 200000000.
1.3.6.1.4.1.2356.800.3.2332.2.20.6.1.3Scalargs2328fSTPCISTAggregatedPortPriorityread-writecurrentdefault: 128, CIST Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)
1.3.6.1.4.1.2356.800.3.2332.2.20.6.1.4Scalargs2328fSTPCISTAggregatedPortAdminEdgeread-writecurrentdefault: 0, 0: non-edge 1: edge
1.3.6.1.4.1.2356.800.3.2332.2.20.6.1.5Scalargs2328fSTPCISTAggregatedPortAutoEdgeread-writecurrentdefault: 1, 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.2.20.6.1.6Scalargs2328fSTPCISTAggregatedPortRestrictedRoleread-writecurrentdefault: 0, 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.2.20.6.1.7Scalargs2328fSTPCISTAggregatedPortRestrictedTCNread-writecurrentdefault: 0, 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.2.20.6.1.8Scalargs2328fSTPCISTAggregatedPortBPDUGuardread-writecurrentdefault: 0, 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.2.20.6.1.9Scalargs2328fSTPCISTAggregatedPortPointtoPointread-writecurrentdefault: 0, 0: Forced True 1: Forced False 2: Auto
1.3.6.1.4.1.2356.800.3.2332.2.20.6.2Tablegs2328fSTPCISTNormalPortTablenot-accessiblecurrentShow CIST Normal Port Configurations.
1.3.6.1.4.1.2356.800.3.2332.2.20.6.2.1Rowgs2328fSTPCISTNormalPortEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.20.6.2.1.1Columngs2328fSTPCISTNormalPortConfPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.20.6.2.1.2Columngs2328fSTPCISTNormalPortSTPEnabledread-writecurrentdefault: 0, 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.2.20.6.2.1.3Columngs2328fSTPCISTNormalPortPathCostread-writecurrentAuto: 0, Specific Path Cost range: 1 - 200000000.
1.3.6.1.4.1.2356.800.3.2332.2.20.6.2.1.4Columngs2328fSTPCISTNormalPortPriorityread-writecurrentdefault: 128, CIST Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)
1.3.6.1.4.1.2356.800.3.2332.2.20.6.2.1.5Columngs2328fSTPCISTNormalPortAdminEdgeread-writecurrentdefault: 0, 0: non-edge 1: edge
1.3.6.1.4.1.2356.800.3.2332.2.20.6.2.1.6Columngs2328fSTPCISTNormalPortAutoEdgeread-writecurrentdefault: 1, 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.2.20.6.2.1.7Columngs2328fSTPCISTNormalPortRestrictedRoleread-writecurrentdefault: 0, 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.2.20.6.2.1.8Columngs2328fSTPCISTNormalPortRestrictedTCNread-writecurrentdefault: 0, 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.2.20.6.2.1.9Columngs2328fSTPCISTNormalPortBPDUGuardread-writecurrentdefault: 0, 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.2.20.6.2.1.10Columngs2328fSTPCISTNormalPortPointtoPointread-writecurrentdefault: 2, 0: Forced True 1: Forced False 2: Auto
1.3.6.1.4.1.2356.800.3.2332.2.20.7Nodegs2328fSTPMSTIPort
1.3.6.1.4.1.2356.800.3.2332.2.20.7.1Nodegs2328fSTPMSTI1Port
1.3.6.1.4.1.2356.800.3.2332.2.20.7.1.1Nodegs2328fSTPMSTI1AggregatedPort
1.3.6.1.4.1.2356.800.3.2332.2.20.7.1.1.1Scalargs2328fSTPMSTI1AggregatedPortPathCostread-writecurrentAuto: 0, Specific Path Cost range: 1 - 200000000.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.1.1.2Scalargs2328fSTPMSTI1AggregatedPortPriorityread-writecurrentdefault: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)
1.3.6.1.4.1.2356.800.3.2332.2.20.7.1.2Tablegs2328fSTPMSTI1NormalPortTablenot-accessiblecurrentShow MSTI1 Normal Port Configurations.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.1.2.1Rowgs2328fSTPMSTI1NormalPortEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.20.7.1.2.1.1Columngs2328fSTPMSTI1NormalPortConfPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.1.2.1.2Columngs2328fSTPMSTI1NormalPortPathCostread-writecurrentAuto: 0, Specific Path Cost range: 1 - 200000000.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.1.2.1.3Columngs2328fSTPMSTI1NormalPortPriorityread-writecurrentdefault: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)
1.3.6.1.4.1.2356.800.3.2332.2.20.7.2Nodegs2328fSTPMSTI2Port
1.3.6.1.4.1.2356.800.3.2332.2.20.7.2.1Nodegs2328fSTPMSTI2AggregatedPort
1.3.6.1.4.1.2356.800.3.2332.2.20.7.2.1.1Scalargs2328fSTPMSTI2AggregatedPortPathCostread-writecurrentAuto: 0, Specific Path Cost range: 1 - 200000000.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.2.1.2Scalargs2328fSTPMSTI2AggregatedPortPriorityread-writecurrentdefault: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)
1.3.6.1.4.1.2356.800.3.2332.2.20.7.2.2Tablegs2328fSTPMSTI2NormalPortTablenot-accessiblecurrentShow MSTI2 Normal Port Configurations.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.2.2.1Rowgs2328fSTPMSTI2NormalPortEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.20.7.2.2.1.1Columngs2328fSTPMSTI2NormalPortConfPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.2.2.1.2Columngs2328fSTPMSTI2NormalPortPathCostread-writecurrentAuto: 0, Specific Path Cost range: 1 - 200000000.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.2.2.1.3Columngs2328fSTPMSTI2NormalPortPriorityread-writecurrentdefault: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)
1.3.6.1.4.1.2356.800.3.2332.2.20.7.3Nodegs2328fSTPMSTI3Port
1.3.6.1.4.1.2356.800.3.2332.2.20.7.3.1Nodegs2328fSTPMSTI3AggregatedPort
1.3.6.1.4.1.2356.800.3.2332.2.20.7.3.1.1Scalargs2328fSTPMSTI3AggregatedPortPathCostread-writecurrentAuto: 0, Specific Path Cost range: 1 - 200000000.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.3.1.2Scalargs2328fSTPMSTI3AggregatedPortPriorityread-writecurrentdefault: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)
1.3.6.1.4.1.2356.800.3.2332.2.20.7.3.2Tablegs2328fSTPMSTI3NormalPortTablenot-accessiblecurrentShow MSTI3 Normal Port Configurations.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.3.2.1Rowgs2328fSTPMSTI3NormalPortEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.20.7.3.2.1.1Columngs2328fSTPMSTI3NormalPortConfPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.3.2.1.2Columngs2328fSTPMSTI3NormalPortPathCostread-writecurrentAuto: 0, Specific Path Cost range: 1 - 200000000.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.3.2.1.3Columngs2328fSTPMSTI3NormalPortPriorityread-writecurrentdefault: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)
1.3.6.1.4.1.2356.800.3.2332.2.20.7.4Nodegs2328fSTPMSTI4Port
1.3.6.1.4.1.2356.800.3.2332.2.20.7.4.1Nodegs2328fSTPMSTI4AggregatedPort
1.3.6.1.4.1.2356.800.3.2332.2.20.7.4.1.1Scalargs2328fSTPMSTI4AggregatedPortPathCostread-writecurrentAuto: 0, Specific Path Cost range: 1 - 200000000.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.4.1.2Scalargs2328fSTPMSTI4AggregatedPortPriorityread-writecurrentdefault: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)
1.3.6.1.4.1.2356.800.3.2332.2.20.7.4.2Tablegs2328fSTPMSTI4NormalPortTablenot-accessiblecurrentShow MSTI4 Normal Port Configurations.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.4.2.1Rowgs2328fSTPMSTI4NormalPortEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.20.7.4.2.1.1Columngs2328fSTPMSTI4NormalPortConfPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.4.2.1.2Columngs2328fSTPMSTI4NormalPortPathCostread-writecurrentAuto: 0, Specific Path Cost range: 1 - 200000000.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.4.2.1.3Columngs2328fSTPMSTI4NormalPortPriorityread-writecurrentdefault: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)
1.3.6.1.4.1.2356.800.3.2332.2.20.7.5Nodegs2328fSTPMSTI5Port
1.3.6.1.4.1.2356.800.3.2332.2.20.7.5.1Nodegs2328fSTPMSTI5AggregatedPort
1.3.6.1.4.1.2356.800.3.2332.2.20.7.5.1.1Scalargs2328fSTPMSTI5AggregatedPortPathCostread-writecurrentAuto: 0, Specific Path Cost range: 1 - 200000000.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.5.1.2Scalargs2328fSTPMSTI5AggregatedPortPriorityread-writecurrentdefault: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)
1.3.6.1.4.1.2356.800.3.2332.2.20.7.5.2Tablegs2328fSTPMSTI5NormalPortTablenot-accessiblecurrentShow MSTI5 Normal Port Configurations.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.5.2.1Rowgs2328fSTPMSTI5NormalPortEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.20.7.5.2.1.1Columngs2328fSTPMSTI5NormalPortConfPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.5.2.1.2Columngs2328fSTPMSTI5NormalPortPathCostread-writecurrentAuto: 0, Specific Path Cost range: 1 - 200000000.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.5.2.1.3Columngs2328fSTPMSTI5NormalPortPriorityread-writecurrentdefault: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)
1.3.6.1.4.1.2356.800.3.2332.2.20.7.6Nodegs2328fSTPMSTI6Port
1.3.6.1.4.1.2356.800.3.2332.2.20.7.6.1Nodegs2328fSTPMSTI6AggregatedPort
1.3.6.1.4.1.2356.800.3.2332.2.20.7.6.1.1Scalargs2328fSTPMSTI6AggregatedPortPathCostread-writecurrentAuto: 0, Specific Path Cost range: 1 - 200000000.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.6.1.2Scalargs2328fSTPMSTI6AggregatedPortPriorityread-writecurrentdefault: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)
1.3.6.1.4.1.2356.800.3.2332.2.20.7.6.2Tablegs2328fSTPMSTI6NormalPortTablenot-accessiblecurrentShow MSTI6 Normal Port Configurations.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.6.2.1Rowgs2328fSTPMSTI6NormalPortEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.20.7.6.2.1.1Columngs2328fSTPMSTI6NormalPortConfPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.6.2.1.2Columngs2328fSTPMSTI6NormalPortPathCostread-writecurrentAuto: 0, Specific Path Cost range: 1 - 200000000.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.6.2.1.3Columngs2328fSTPMSTI6NormalPortPriorityread-writecurrentdefault: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)
1.3.6.1.4.1.2356.800.3.2332.2.20.7.7Nodegs2328fSTPMSTI7Port
1.3.6.1.4.1.2356.800.3.2332.2.20.7.7.1Nodegs2328fSTPMSTI7AggregatedPort
1.3.6.1.4.1.2356.800.3.2332.2.20.7.7.1.1Scalargs2328fSTPMSTI7AggregatedPortPathCostread-writecurrentAuto: 0, Specific Path Cost range: 1 - 200000000.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.7.1.2Scalargs2328fSTPMSTI7AggregatedPortPriorityread-writecurrentdefault: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)
1.3.6.1.4.1.2356.800.3.2332.2.20.7.7.2Tablegs2328fSTPMSTI7NormalPortTablenot-accessiblecurrentShow MSTI7 Normal Port Configurations.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.7.2.1Rowgs2328fSTPMSTI7NormalPortEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.20.7.7.2.1.1Columngs2328fSTPMSTI7NormalPortConfPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.7.2.1.2Columngs2328fSTPMSTI7NormalPortPathCostread-writecurrentAuto: 0, Specific Path Cost range: 1 - 200000000.
1.3.6.1.4.1.2356.800.3.2332.2.20.7.7.2.1.3Columngs2328fSTPMSTI7NormalPortPriorityread-writecurrentdefault: 128, Aggregated Port Priority (0/16/32/48/64/80/96/112/128/144/160/176/192/208/224/240)
1.3.6.1.4.1.2356.800.3.2332.2.20.8Nodegs2328fSTPBridgeStatus
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1Nodegs2328fCISTBridgeSTP
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.1Nodegs2328fCISTBridgeSTPStatus
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.1.1Scalargs2328fCISTBridgeInstanceread-onlycurrentThe Bridge instance - CIST, MST1, ...
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.1.2Scalargs2328fCISTBridgeIDread-onlycurrentThe Bridge ID of this Bridge instance.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.1.3Scalargs2328fCISTRootIDread-onlycurrentThe Bridge ID of the currently elected root bridge.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.1.4Scalargs2328fCISTRootPortread-onlycurrentThe switch port currently assigned the root port role.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.1.5Scalargs2328fCISTRootCostread-onlycurrentRoot Path Cost.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.1.6Scalargs2328fCISTRegionalRootread-onlycurrentThe Bridge ID of the currently elected regional root bridge, inside the MSTP region of this bridge.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.1.7Scalargs2328fCISTInternalRootCostread-onlycurrentThe Regional Root Path Cost.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.1.8Scalargs2328fCISTTopologyFlagread-onlycurrentThe current state of the Topology Change Flag of this Bridge instance.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.1.9Scalargs2328fCISTTopologyChangeCountread-onlycurrentThe number of times where the topology change flag has been set.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.1.10Scalargs2328fCISTTopologyChangeLastread-onlycurrentThe time passed since the Topology Flag was last set.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.2Tablegs2328fCISTPortStateTablenot-accessiblecurrentShow CIST Ports and Aggregations State Configurations.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.2.1Rowgs2328fCISTPortStateEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.2.1.1Columngs2328fCISTPortStateIndexnot-accessiblecurrenttable index.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.2.1.2Columngs2328fCISTPortStatePortread-onlycurrentThe switch port number of the logical STP port.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.2.1.3Columngs2328fCISTPortStatePortIDread-onlycurrentThe port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.2.1.4Columngs2328fCISTPortStateRoleread-onlycurrentThe current STP port role.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.2.1.5Columngs2328fCISTPortStateStateread-onlycurrentThe current STP port state.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.2.1.6Columngs2328fCISTPortStatePathCostread-onlycurrentThe current STP port path cost.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.2.1.7Columngs2328fCISTPortStateEdgeread-onlycurrentThe current STP port Edge Flag.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.2.1.8Columngs2328fCISTPortStatePoint2Pointread-onlycurrentThe current STP port point-to-point flag.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.1.2.1.9Columngs2328fCISTPortStateUptimeread-onlycurrentThe time since the bridge port was last initialized.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2Nodegs2328fMSTI1BridgeSTP
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2.1Nodegs2328fMSTI1BridgeSTPStatus
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2.1.1Scalargs2328fMSTI1BridgeInstanceread-onlycurrentThe Bridge instance - CIST, MST1, ...
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2.1.2Scalargs2328fMSTI1BridgeIDread-onlycurrentThe Bridge ID of this Bridge instance.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2.1.3Scalargs2328fMSTI1RootIDread-onlycurrentThe Bridge ID of the currently elected root bridge.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2.1.4Scalargs2328fMSTI1RootPortread-onlycurrentThe switch port currently assigned the root port role.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2.1.5Scalargs2328fMSTI1RootCostread-onlycurrentRoot Path Cost.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2.1.8Scalargs2328fMSTI1TopologyFlagread-onlycurrentThe current state of the Topology Change Flag of this Bridge instance.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2.1.9Scalargs2328fMSTI1TopologyChangeCountread-onlycurrentThe number of times where the topology change flag has been set.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2.1.10Scalargs2328fMSTI1TopologyChangeLastread-onlycurrentThe time passed since the Topology Flag was last set.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2.2Tablegs2328fMSTI1PortStateTablenot-accessiblecurrentShow MSTI1 Ports and Aggregations State Configurations.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2.2.1Rowgs2328fMSTI1PortStateEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2.2.1.1Columngs2328fMSTI1PortStateIndexnot-accessiblecurrenttable index.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2.2.1.2Columngs2328fMSTI1PortStatePortread-onlycurrentThe switch port number of the logical STP port.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2.2.1.3Columngs2328fMSTI1PortStatePortIDread-onlycurrentThe port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2.2.1.4Columngs2328fMSTI1PortStateRoleread-onlycurrentThe current STP port role.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2.2.1.5Columngs2328fMSTI1PortStateStateread-onlycurrentThe current STP port state.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2.2.1.6Columngs2328fMSTI1PortStatePathCostread-onlycurrentThe current STP port path cost.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2.2.1.7Columngs2328fMSTI1PortStateEdgeread-onlycurrentThe current STP port Edge Flag.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2.2.1.8Columngs2328fMSTI1PortStatePoint2Pointread-onlycurrentThe current STP port point-to-point flag.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.2.2.1.9Columngs2328fMSTI1PortStateUptimeread-onlycurrentThe time since the bridge port was last initialized.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3Nodegs2328fMSTI2BridgeSTP
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3.1Nodegs2328fMSTI2BridgeSTPStatus
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3.1.1Scalargs2328fMSTI2BridgeInstanceread-onlycurrentThe Bridge instance - CIST, MST1, ...
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3.1.2Scalargs2328fMSTI2BridgeIDread-onlycurrentThe Bridge ID of this Bridge instance.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3.1.3Scalargs2328fMSTI2RootIDread-onlycurrentThe Bridge ID of the currently elected root bridge.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3.1.4Scalargs2328fMSTI2RootPortread-onlycurrentThe switch port currently assigned the root port role.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3.1.5Scalargs2328fMSTI2RootCostread-onlycurrentRoot Path Cost.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3.1.8Scalargs2328fMSTI2TopologyFlagread-onlycurrentThe current state of the Topology Change Flag of this Bridge instance.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3.1.9Scalargs2328fMSTI2TopologyChangeCountread-onlycurrentThe number of times where the topology change flag has been set.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3.1.10Scalargs2328fMSTI2TopologyChangeLastread-onlycurrentThe time passed since the Topology Flag was last set.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3.2Tablegs2328fMSTI2PortStateTablenot-accessiblecurrentShow MSTI2 Ports and Aggregations State Configurations.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3.2.1Rowgs2328fMSTI2PortStateEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3.2.1.1Columngs2328fMSTI2PortStateIndexnot-accessiblecurrenttable index.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3.2.1.2Columngs2328fMSTI2PortStatePortread-onlycurrentThe switch port number of the logical STP port.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3.2.1.3Columngs2328fMSTI2PortStatePortIDread-onlycurrentThe port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3.2.1.4Columngs2328fMSTI2PortStateRoleread-onlycurrentThe current STP port role.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3.2.1.5Columngs2328fMSTI2PortStateStateread-onlycurrentThe current STP port state.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3.2.1.6Columngs2328fMSTI2PortStatePathCostread-onlycurrentThe current STP port path cost.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3.2.1.7Columngs2328fMSTI2PortStateEdgeread-onlycurrentThe current STP port Edge Flag.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3.2.1.8Columngs2328fMSTI2PortStatePoint2Pointread-onlycurrentThe current STP port point-to-point flag.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.3.2.1.9Columngs2328fMSTI2PortStateUptimeread-onlycurrentThe time since the bridge port was last initialized.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4Nodegs2328fMSTI3BridgeSTP
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4.1Nodegs2328fMSTI3BridgeSTPStatus
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4.1.1Scalargs2328fMSTI3BridgeInstanceread-onlycurrentThe Bridge instance - CIST, MST1, ...
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4.1.2Scalargs2328fMSTI3BridgeIDread-onlycurrentThe Bridge ID of this Bridge instance.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4.1.3Scalargs2328fMSTI3RootIDread-onlycurrentThe Bridge ID of the currently elected root bridge.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4.1.4Scalargs2328fMSTI3RootPortread-onlycurrentThe switch port currently assigned the root port role.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4.1.5Scalargs2328fMSTI3RootCostread-onlycurrentRoot Path Cost.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4.1.8Scalargs2328fMSTI3TopologyFlagread-onlycurrentThe current state of the Topology Change Flag of this Bridge instance.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4.1.9Scalargs2328fMSTI3TopologyChangeCountread-onlycurrentThe number of times where the topology change flag has been set.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4.1.10Scalargs2328fMSTI3TopologyChangeLastread-onlycurrentThe time passed since the Topology Flag was last set.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4.2Tablegs2328fMSTI3PortStateTablenot-accessiblecurrentShow MSTI3 Ports and Aggregations State Configurations.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4.2.1Rowgs2328fMSTI3PortStateEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4.2.1.1Columngs2328fMSTI3PortStateIndexnot-accessiblecurrenttable index.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4.2.1.2Columngs2328fMSTI3PortStatePortread-onlycurrentThe switch port number of the logical STP port.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4.2.1.3Columngs2328fMSTI3PortStatePortIDread-onlycurrentThe port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4.2.1.4Columngs2328fMSTI3PortStateRoleread-onlycurrentThe current STP port role.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4.2.1.5Columngs2328fMSTI3PortStateStateread-onlycurrentThe current STP port state.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4.2.1.6Columngs2328fMSTI3PortStatePathCostread-onlycurrentThe current STP port path cost.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4.2.1.7Columngs2328fMSTI3PortStateEdgeread-onlycurrentThe current STP port Edge Flag.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4.2.1.8Columngs2328fMSTI3PortStatePoint2Pointread-onlycurrentThe current STP port point-to-point flag.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.4.2.1.9Columngs2328fMSTI3PortStateUptimeread-onlycurrentThe time since the bridge port was last initialized.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5Nodegs2328fMSTI4BridgeSTP
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5.1Nodegs2328fMSTI4BridgeSTPStatus
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5.1.1Scalargs2328fMSTI4BridgeInstanceread-onlycurrentThe Bridge instance - CIST, MST1, ...
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5.1.2Scalargs2328fMSTI4BridgeIDread-onlycurrentThe Bridge ID of this Bridge instance.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5.1.3Scalargs2328fMSTI4RootIDread-onlycurrentThe Bridge ID of the currently elected root bridge.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5.1.4Scalargs2328fMSTI4RootPortread-onlycurrentThe switch port currently assigned the root port role.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5.1.5Scalargs2328fMSTI4RootCostread-onlycurrentRoot Path Cost.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5.1.8Scalargs2328fMSTI4TopologyFlagread-onlycurrentThe current state of the Topology Change Flag of this Bridge instance.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5.1.9Scalargs2328fMSTI4TopologyChangeCountread-onlycurrentThe number of times where the topology change flag has been set.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5.1.10Scalargs2328fMSTI4TopologyChangeLastread-onlycurrentThe time passed since the Topology Flag was last set.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5.2Tablegs2328fMSTI4PortStateTablenot-accessiblecurrentShow MSTI4 Ports and Aggregations State Configurations.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5.2.1Rowgs2328fMSTI4PortStateEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5.2.1.1Columngs2328fMSTI4PortStateIndexnot-accessiblecurrenttable index.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5.2.1.2Columngs2328fMSTI4PortStatePortread-onlycurrentThe switch port number of the logical STP port.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5.2.1.3Columngs2328fMSTI4PortStatePortIDread-onlycurrentThe port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5.2.1.4Columngs2328fMSTI4PortStateRoleread-onlycurrentThe current STP port role.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5.2.1.5Columngs2328fMSTI4PortStateStateread-onlycurrentThe current STP port state.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5.2.1.6Columngs2328fMSTI4PortStatePathCostread-onlycurrentThe current STP port path cost.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5.2.1.7Columngs2328fMSTI4PortStateEdgeread-onlycurrentThe current STP port Edge Flag.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5.2.1.8Columngs2328fMSTI4PortStatePoint2Pointread-onlycurrentThe current STP port point-to-point flag.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.5.2.1.9Columngs2328fMSTI4PortStateUptimeread-onlycurrentThe time since the bridge port was last initialized.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6Nodegs2328fMSTI5BridgeSTP
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6.1Nodegs2328fMSTI5BridgeSTPStatus
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6.1.1Scalargs2328fMSTI5BridgeInstanceread-onlycurrentThe Bridge instance - CIST, MST1, ...
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6.1.2Scalargs2328fMSTI5BridgeIDread-onlycurrentThe Bridge ID of this Bridge instance.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6.1.3Scalargs2328fMSTI5RootIDread-onlycurrentThe Bridge ID of the currently elected root bridge.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6.1.4Scalargs2328fMSTI5RootPortread-onlycurrentThe switch port currently assigned the root port role.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6.1.5Scalargs2328fMSTI5RootCostread-onlycurrentRoot Path Cost.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6.1.8Scalargs2328fMSTI5TopologyFlagread-onlycurrentThe current state of the Topology Change Flag of this Bridge instance.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6.1.9Scalargs2328fMSTI5TopologyChangeCountread-onlycurrentThe number of times where the topology change flag has been set.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6.1.10Scalargs2328fMSTI5TopologyChangeLastread-onlycurrentThe time passed since the Topology Flag was last set.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6.2Tablegs2328fMSTI5PortStateTablenot-accessiblecurrentShow MSTI5 Ports and Aggregations State Configurations.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6.2.1Rowgs2328fMSTI5PortStateEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6.2.1.1Columngs2328fMSTI5PortStateIndexnot-accessiblecurrenttable index.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6.2.1.2Columngs2328fMSTI5PortStatePortread-onlycurrentThe switch port number of the logical STP port.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6.2.1.3Columngs2328fMSTI5PortStatePortIDread-onlycurrentThe port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6.2.1.4Columngs2328fMSTI5PortStateRoleread-onlycurrentThe current STP port role.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6.2.1.5Columngs2328fMSTI5PortStateStateread-onlycurrentThe current STP port state.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6.2.1.6Columngs2328fMSTI5PortStatePathCostread-onlycurrentThe current STP port path cost.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6.2.1.7Columngs2328fMSTI5PortStateEdgeread-onlycurrentThe current STP port Edge Flag.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6.2.1.8Columngs2328fMSTI5PortStatePoint2Pointread-onlycurrentThe current STP port point-to-point flag.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.6.2.1.9Columngs2328fMSTI5PortStateUptimeread-onlycurrentThe time since the bridge port was last initialized.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7Nodegs2328fMSTI6BridgeSTP
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7.1Nodegs2328fMSTI6BridgeSTPStatus
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7.1.1Scalargs2328fMSTI6BridgeInstanceread-onlycurrentThe Bridge instance - CIST, MST1, ...
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7.1.2Scalargs2328fMSTI6BridgeIDread-onlycurrentThe Bridge ID of this Bridge instance.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7.1.3Scalargs2328fMSTI6RootIDread-onlycurrentThe Bridge ID of the currently elected root bridge.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7.1.4Scalargs2328fMSTI6RootPortread-onlycurrentThe switch port currently assigned the root port role.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7.1.5Scalargs2328fMSTI6RootCostread-onlycurrentRoot Path Cost.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7.1.8Scalargs2328fMSTI6TopologyFlagread-onlycurrentThe current state of the Topology Change Flag of this Bridge instance.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7.1.9Scalargs2328fMSTI6TopologyChangeCountread-onlycurrentThe number of times where the topology change flag has been set.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7.1.10Scalargs2328fMSTI6TopologyChangeLastread-onlycurrentThe time passed since the Topology Flag was last set.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7.2Tablegs2328fMSTI6PortStateTablenot-accessiblecurrentShow MSTI6 Ports and Aggregations State Configurations.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7.2.1Rowgs2328fMSTI6PortStateEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7.2.1.1Columngs2328fMSTI6PortStateIndexnot-accessiblecurrenttable index.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7.2.1.2Columngs2328fMSTI6PortStatePortread-onlycurrentThe switch port number of the logical STP port.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7.2.1.3Columngs2328fMSTI6PortStatePortIDread-onlycurrentThe port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7.2.1.4Columngs2328fMSTI6PortStateRoleread-onlycurrentThe current STP port role.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7.2.1.5Columngs2328fMSTI6PortStateStateread-onlycurrentThe current STP port state.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7.2.1.6Columngs2328fMSTI6PortStatePathCostread-onlycurrentThe current STP port path cost.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7.2.1.7Columngs2328fMSTI6PortStateEdgeread-onlycurrentThe current STP port Edge Flag.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7.2.1.8Columngs2328fMSTI6PortStatePoint2Pointread-onlycurrentThe current STP port point-to-point flag.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.7.2.1.9Columngs2328fMSTI6PortStateUptimeread-onlycurrentThe time since the bridge port was last initialized.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8Nodegs2328fMSTI7BridgeSTP
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8.1Nodegs2328fMSTI7BridgeSTPStatus
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8.1.1Scalargs2328fMSTI7BridgeInstanceread-onlycurrentThe Bridge instance - CIST, MST1, ...
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8.1.2Scalargs2328fMSTI7BridgeIDread-onlycurrentThe Bridge ID of this Bridge instance.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8.1.3Scalargs2328fMSTI7RootIDread-onlycurrentThe Bridge ID of the currently elected root bridge.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8.1.4Scalargs2328fMSTI7RootPortread-onlycurrentThe switch port currently assigned the root port role.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8.1.5Scalargs2328fMSTI7RootCostread-onlycurrentRoot Path Cost.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8.1.8Scalargs2328fMSTI7TopologyFlagread-onlycurrentThe current state of the Topology Change Flag of this Bridge instance.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8.1.9Scalargs2328fMSTI7TopologyChangeCountread-onlycurrentThe number of times where the topology change flag has been set.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8.1.10Scalargs2328fMSTI7TopologyChangeLastread-onlycurrentThe time passed since the Topology Flag was last set.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8.2Tablegs2328fMSTI7PortStateTablenot-accessiblecurrentShow MSTI7 Ports and Aggregations State Configurations.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8.2.1Rowgs2328fMSTI7PortStateEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8.2.1.1Columngs2328fMSTI7PortStateIndexnot-accessiblecurrenttable index.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8.2.1.2Columngs2328fMSTI7PortStatePortread-onlycurrentThe switch port number of the logical STP port.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8.2.1.3Columngs2328fMSTI7PortStatePortIDread-onlycurrentThe port id as used by the STP protocol. This is the priority part and the logical port index of the bridge port.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8.2.1.4Columngs2328fMSTI7PortStateRoleread-onlycurrentThe current STP port role.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8.2.1.5Columngs2328fMSTI7PortStateStateread-onlycurrentThe current STP port state.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8.2.1.6Columngs2328fMSTI7PortStatePathCostread-onlycurrentThe current STP port path cost.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8.2.1.7Columngs2328fMSTI7PortStateEdgeread-onlycurrentThe current STP port Edge Flag.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8.2.1.8Columngs2328fMSTI7PortStatePoint2Pointread-onlycurrentThe current STP port point-to-point flag.
1.3.6.1.4.1.2356.800.3.2332.2.20.8.8.2.1.9Columngs2328fMSTI7PortStateUptimeread-onlycurrentThe time since the bridge port was last initialized.
1.3.6.1.4.1.2356.800.3.2332.2.20.9Tablegs2328fSTPPortStatusTablenot-accessiblecurrentShow STP Port Status.
1.3.6.1.4.1.2356.800.3.2332.2.20.9.1Rowgs2328fSTPPortStatusEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.20.9.1.1Columngs2328fSTPPortStatusPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.20.9.1.2Columngs2328fSTPPortStatusCISTRoleread-onlycurrentThe current STP port role of the CIST port.
1.3.6.1.4.1.2356.800.3.2332.2.20.9.1.3Columngs2328fSTPPortStatusCISTStateread-onlycurrentThe current STP port state of the CIST port.
1.3.6.1.4.1.2356.800.3.2332.2.20.9.1.4Columngs2328fSTPPortStatusUptimeread-onlycurrentThe time since the bridge port was last initialized.
1.3.6.1.4.1.2356.800.3.2332.2.20.10Tablegs2328fSTPPortStatisticsTablenot-accessiblecurrentShow STP Port Statistics.
1.3.6.1.4.1.2356.800.3.2332.2.20.10.1Rowgs2328fSTPPortStatisticsEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.20.10.1.1Columngs2328fSTPStatisticsIndexnot-accessiblecurrenttable index.
1.3.6.1.4.1.2356.800.3.2332.2.20.10.1.2Columngs2328fSTPStatisticsPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.2.20.10.1.3Columngs2328fSTPStatisticsTxMSTPread-onlycurrentThe number of MSTP Configuration BPDU's received/transmitted on the port.
1.3.6.1.4.1.2356.800.3.2332.2.20.10.1.4Columngs2328fSTPStatisticsTxRSTPread-onlycurrentThe number of RSTP Configuration BPDU's received/transmitted on the port.
1.3.6.1.4.1.2356.800.3.2332.2.20.10.1.5Columngs2328fSTPStatisticsTxSTPread-onlycurrentThe number of legacy STP Configuration BPDU's received/transmitted on the port.
1.3.6.1.4.1.2356.800.3.2332.2.20.10.1.6Columngs2328fSTPStatisticsTxTCNread-onlycurrentThe number of Topology Change Notification BPDU's received/transmitted on the port.
1.3.6.1.4.1.2356.800.3.2332.2.20.10.1.7Columngs2328fSTPStatisticsRxMSTPread-onlycurrentThe number of MSTP Configuration BPDU's received/transmitted on the port.
1.3.6.1.4.1.2356.800.3.2332.2.20.10.1.8Columngs2328fSTPStatisticsRxRSTPread-onlycurrentThe number of RSTP Configuration BPDU's received/transmitted on the port.
1.3.6.1.4.1.2356.800.3.2332.2.20.10.1.9Columngs2328fSTPStatisticsRxSTPread-onlycurrentThe number of legacy STP Configuration BPDU's received/transmitted on the port.
1.3.6.1.4.1.2356.800.3.2332.2.20.10.1.10Columngs2328fSTPStatisticsRxTCNread-onlycurrentThe number of Topology Change Notification BPDU's received/transmitted on the port.
1.3.6.1.4.1.2356.800.3.2332.2.20.10.1.11Columngs2328fSTPStatisticsDiscardedUnknownread-onlycurrentThe number of unknown Spanning Tree BPDU's received and discarded on the port.
1.3.6.1.4.1.2356.800.3.2332.2.20.10.1.12Columngs2328fSTPStatisticsDiscardedIllegalread-onlycurrentThe number of illegal Spanning Tree BPDU's received and discarded on the port.
1.3.6.1.4.1.2356.800.3.2332.2.21Nodegs2328fFilteringDataBase
1.3.6.1.4.1.2356.800.3.2332.2.21.1Nodegs2328fFilteringDataBaseConfig
1.3.6.1.4.1.2356.800.3.2332.2.21.1.1Scalargs2328fFilteringDataBaseAgingTimeread-writecurrentConfigure aging time by entering a value here in seconds. default: 300, range: 10-1000000. Disable automatic aging : 0.
1.3.6.1.4.1.2356.800.3.2332.2.21.1.2Tablegs2328fFilteringDataBaseConfigTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.21.1.2.1Rowgs2328fFilteringDataBaseConfigEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.21.1.2.1.1Columngs2328fFilteringDataBaseConfigPortnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.21.1.2.1.2Columngs2328fFilteringDataBaseConfigLearningread-writecurrentConfigure learning mode of switch ports. default: 0, 0: auto, 1: disable, 2: secure.
1.3.6.1.4.1.2356.800.3.2332.2.21.1.3Nodegs2328fFilteringDataBaseStaticMAC
1.3.6.1.4.1.2356.800.3.2332.2.21.1.3.1Scalargs2328fFilteringDataBaseStaticMACCreateread-writecurrentdefault: 0 0 : None (read only) 1 : Create Static MAC Table
1.3.6.1.4.1.2356.800.3.2332.2.21.1.3.2Tablegs2328fFilteringDataBaseStaticMACTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.21.1.3.2.1Rowgs2328fFilteringDataBaseStaticMACEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.21.1.3.2.1.1Columngs2328fFilteringDataBaseStaticMACIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.21.1.3.2.1.2Columngs2328fFilteringDataBaseStaticMACVLANIdread-writecurrentVLAN ID, range: 1 - 4094.
1.3.6.1.4.1.2356.800.3.2332.2.21.1.3.2.1.3Columngs2328fFilteringDataBaseStaticMACAddressread-writecurrentMAC address, format 0a 1b 2c 3d 4e 5f
1.3.6.1.4.1.2356.800.3.2332.2.21.1.3.2.1.4Columngs2328fFilteringDataBaseStaticMACPortMembersread-writecurrentTo include the ports in a Static MAC Table
1.3.6.1.4.1.2356.800.3.2332.2.21.1.3.2.1.5Columngs2328fFilteringDataBaseStaticMACRowStatusread-writecurrent1: active 2: notInservice 4: destroy 5: undo
1.3.6.1.4.1.2356.800.3.2332.2.21.1.4Tablegs2328fFilteringDataBaseDynamicMACTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.21.1.4.1Rowgs2328fFilteringDataBaseDynamicMACEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.21.1.4.1.1Columngs2328fFilteringDataBaseDynamicMACIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.2.21.1.4.1.2Columngs2328fFilteringDataBaseDynamicMACTyperead-onlycurrentIndicates whether the entry is a static or a dynamic entry.
1.3.6.1.4.1.2356.800.3.2332.2.21.1.4.1.3Columngs2328fFilteringDataBaseDynamicMACVLANread-onlycurrentThe VLAN ID of the entry.
1.3.6.1.4.1.2356.800.3.2332.2.21.1.4.1.4Columngs2328fFilteringDataBaseDynamicMACAddressread-onlycurrentThe MAC address of the entry.
1.3.6.1.4.1.2356.800.3.2332.2.21.1.4.1.5Columngs2328fFilteringDataBaseDynamicPortMembersread-onlycurrentThe ports that are members of the entry.
1.3.6.1.4.1.2356.800.3.2332.2.22Nodegs2328fSFlowAgent
1.3.6.1.4.1.2356.800.3.2332.2.22.1Nodegs2328fSFlowAgentCollector
1.3.6.1.4.1.2356.800.3.2332.2.22.1.1Scalargs2328fSFlowAgentReceiverModeread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.2.1500Nodegs2328fLMC
1.3.6.1.4.1.2356.800.3.2332.2.1500.1Scalargs2328fLMCOperatingread-writecurrent0: disabled 1: enabled 2: try
1.3.6.1.4.1.2356.800.3.2332.2.1500.2Scalargs2328fLMCConfigViaDhcpread-writecurrent0: disabled 1: enabled
1.3.6.1.4.1.2356.800.3.2332.2.1500.3Scalargs2328fLMCDomainread-writecurrent0: disabled 1: enabled
1.3.6.1.4.1.2356.800.3.2332.2.1500.4Scalargs2328fLMChcpClientAutoRenewread-writecurrent0: disabled 1: enabled
1.3.6.1.4.1.2356.800.3.2332.2.1500.50Scalargs2328fLMCZeroTouchSupportread-onlycurrent0: No 1: Yes
1.3.6.1.4.1.2356.800.3.2332.2.1500.51Scalargs2328fLMCPairingTokenPresentread-onlycurrent0: No 1: Yes
1.3.6.1.4.1.2356.800.3.2332.2.1500.52Scalargs2328fLMCClientStatusread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1500.53Scalargs2328fLMCManagementStatusread-onlycurrent0: Unpaired 1: Paired 14: PairedAndClaimed
1.3.6.1.4.1.2356.800.3.2332.2.1500.54Scalargs2328fLMCControlStatusread-onlycurrent2: Disabled 4: Operating
1.3.6.1.4.1.2356.800.3.2332.2.1500.55Scalargs2328fLMCMonitoringStatusread-onlycurrent2: Disabled 4: Operating
1.3.6.1.4.1.2356.800.3.2332.2.1500.56Scalargs2328fLMCConfigurationSourceread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1500.57Scalargs2328fLMCConfigModifiedread-onlycurrent0: No 1: Yes
1.3.6.1.4.1.2356.800.3.2332.2.1500.58Scalargs2328fLMCDeviceIDread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.2.1500.100Scalargs2328fLMCRoundTripTimeread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3Nodegs2328fSecurity
1.3.6.1.4.1.2356.800.3.2332.3.1Nodegs2328fIPSourceGuard
1.3.6.1.4.1.2356.800.3.2332.3.1.1Nodegs2328fIPSourceGuardConf
1.3.6.1.4.1.2356.800.3.2332.3.1.1.1Scalargs2328fIPSourceGuardModeread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.1.1.2Tablegs2328fIPSourceGuardPortConfigTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.1.1.2.1Rowgs2328fIPSourceGuardPortConfigEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.1.1.2.1.1Columngs2328fIPSourceGuardPortConfigPortnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.1.1.2.1.2Columngs2328fIPSourceGuardPortConfigModeread-writecurrentdefault: 0 0:disable 1:enable
1.3.6.1.4.1.2356.800.3.2332.3.1.1.2.1.3Columngs2328fIPSourceGuardPortMaxDynamicClientsread-writecurrentdefault: 99 0~2: Max Dynamic clients 99:Unlimited
1.3.6.1.4.1.2356.800.3.2332.3.1.2Nodegs2328fIPSourceGuardStatic
1.3.6.1.4.1.2356.800.3.2332.3.1.2.1Scalargs2328fIPSourceGuardStaticCreateread-writecurrentdefault: 0 0 : None (read only) 1 : Create a IP Source Guard
1.3.6.1.4.1.2356.800.3.2332.3.1.2.2Tablegs2328fIPSourceGuardStaticTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.1.2.2.1Rowgs2328fIPSourceGuardStaticEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.1.2.2.1.1Columngs2328fIPSourceGuardStaticIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.1.2.2.1.2Columngs2328fIPSourceGuardStaticPortread-writecurrentPort, range: 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.3.1.2.2.1.3Columngs2328fIPSourceGuardStaticVLANIdread-writecurrentVLAN ID, range: 1 - 4094.
1.3.6.1.4.1.2356.800.3.2332.3.1.2.2.1.4Columngs2328fIPSourceGuardStaticIPAddressread-writecurrentIP address allowed for doing IP source guard.
1.3.6.1.4.1.2356.800.3.2332.3.1.2.2.1.5Columngs2328fIPSourceGuardStaticMACAddressread-writecurrentAllowed Source MAC address, format 0a 1b 2c 3d 4e 5f
1.3.6.1.4.1.2356.800.3.2332.3.1.2.2.1.6Columngs2328fIPSourceGuardStaticRowStatusread-writecurrent1: active 2: notInservice 3: edit 4: destroy 5: undo
1.3.6.1.4.1.2356.800.3.2332.3.1.3Tablegs2328fIPSourceGuardDynamicTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.1.3.1Rowgs2328fIPSourceGuardDynamicEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.1.3.1.1Columngs2328fIPSourceGuardDynamicIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.1.3.1.2Columngs2328fIPSourceGuardDynamicPortread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.1.3.1.3Columngs2328fIPSourceGuardDynamicVLANIdread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.1.3.1.4Columngs2328fIPSourceGuardDynamicIPAddressread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.1.3.1.5Columngs2328fIPSourceGuardDynamicMACAddressread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.2Nodegs2328fARPInspection
1.3.6.1.4.1.2356.800.3.2332.3.2.1Nodegs2328fARPInspectionConf
1.3.6.1.4.1.2356.800.3.2332.3.2.1.1Scalargs2328fARPInspectionConfModeread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.2.1.2Tablegs2328fARPInspectionConfTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.1.2.1Rowgs2328fARPInspectionConfEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.1.2.1.1Columngs2328fARPInspectionConfPortIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.1.2.1.2Columngs2328fARPInspectionConfPortModeread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.2.2Nodegs2328fARPInspectionStatic
1.3.6.1.4.1.2356.800.3.2332.3.2.2.1Scalargs2328fARPInspectionStaticCreateread-writecurrentdefault: 0 0: none 1: create
1.3.6.1.4.1.2356.800.3.2332.3.2.2.2Tablegs2328fARPInspectionStaticTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.2.2.1Rowgs2328fARPInspectionStaticEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.2.2.1.1Columngs2328fARPInspectionStaticIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.2.2.1.2Columngs2328fARPInspectionStaticPortread-writecurrentPort, range: 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.3.2.2.2.1.3Columngs2328fARPInspectionStaticVLANIdread-writecurrentVLAN ID, range: 1 - 4094.
1.3.6.1.4.1.2356.800.3.2332.3.2.2.2.1.4Columngs2328fARPInspectionStaticIPAddressread-writecurrentIP address allowed for doing ARP request.
1.3.6.1.4.1.2356.800.3.2332.3.2.2.2.1.5Columngs2328fARPInspectionStaticMACAddressread-writecurrentAllowed Source MAC address in ARP request packets, format 0a 1b 2c 3d 4e 5f
1.3.6.1.4.1.2356.800.3.2332.3.2.2.2.1.6Columngs2328fARPInspectionStaticRowStatusread-writecurrent1: active 2: notInservice 3: edit 4: destroy 5: undo
1.3.6.1.4.1.2356.800.3.2332.3.2.3Tablegs2328fARPInspectionDynamicTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.3.1Rowgs2328fARPInspectionDynamicEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.3.1.1Columngs2328fARPInspectionDynamicIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.3.1.2Columngs2328fARPInspectionDynamicPortread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.3.1.3Columngs2328fARPInspectionDynamicVLANIdread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.3.1.4Columngs2328fARPInspectionDynamicIPAddressread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.3.1.5Columngs2328fARPInspectionDynamicMACAddressread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.6Nodegs2328fARPStaticGatewayCtrl
1.3.6.1.4.1.2356.800.3.2332.3.2.6.1Nodegs2328fARPStaticGatewayCtrlSystemConf
1.3.6.1.4.1.2356.800.3.2332.3.2.6.1.1Scalargs2328fARPStaticGatewayCtrlModeread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.2.6.2Scalargs2328fARPStaticGatewayCtrlCreateread-writecurrentdefault: 0 0: none 1: create
1.3.6.1.4.1.2356.800.3.2332.3.2.6.3Tablegs2328fARPStaticGatewayCtrlTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.6.3.1Rowgs2328fARPStaticGatewayCtrlEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.6.3.1.1Columngs2328fARPStaticGatewayCtrlIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.6.3.1.2Columngs2328fARPStaticGatewayCtrlIPAddressread-writecurrentSource IP address.
1.3.6.1.4.1.2356.800.3.2332.3.2.6.3.1.3Columngs2328fARPStaticGatewayCtrlMACAddressread-writecurrentSource MAC address , format 0a 1b 2c 3d 4e 5f
1.3.6.1.4.1.2356.800.3.2332.3.2.6.3.1.4Columngs2328fARPStaticGatewayCtrlPortread-writecurrentPort, range: 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.3.2.6.3.1.5Columngs2328fARPStaticGatewayCtrlActionread-writecurrentdefault: 0 0: none 1: trap 2: drop&trap 3: shutdown 4: trap&shutdown
1.3.6.1.4.1.2356.800.3.2332.3.2.6.3.1.6Columngs2328fARPStaticGatewayCtrlStateread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.6.3.1.7Columngs2328fARPStaticGatewayCtrlReOpenread-writecurrentdefault: 0 0: none 1: reopen
1.3.6.1.4.1.2356.800.3.2332.3.2.6.3.1.8Columngs2328fARPStaticGatewayCtrlRowStatusread-writecurrent1: active 2: notInservice 3: edit 4: destroy 5: undo
1.3.6.1.4.1.2356.800.3.2332.3.2.7Nodegs2328fARPSpoofingPrevention
1.3.6.1.4.1.2356.800.3.2332.3.2.7.1Nodegs2328fARPSpoofingPreventionSystemConf
1.3.6.1.4.1.2356.800.3.2332.3.2.7.1.1Scalargs2328fARPSpoofingPreventionModeread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.2.7.2Tablegs2328fARPSpoofingPreventionTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.7.2.1Rowgs2328fARPSpoofingPreventionEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.7.2.1.1Columngs2328fARPSpoofingPreventionPortnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.7.2.1.2Columngs2328fARPSpoofingPreventionPortModeread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.2.7.2.1.3Columngs2328fARPSpoofingPreventionPortLimitread-writecurrentdefault: 1, range: 1-100
1.3.6.1.4.1.2356.800.3.2332.3.2.7.2.1.4Columngs2328fARPSpoofingPreventionPortActionread-writecurrentdefault: 0 0: none 1: trap 2: drop&trap 3: shutdown 4: trap&shutdown
1.3.6.1.4.1.2356.800.3.2332.3.2.7.2.1.5Columngs2328fARPSpoofingPreventionPortStateread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.2.7.2.1.6Columngs2328fARPSpoofingPreventionPortReOpenread-writecurrentdefault: 0 0: none 1: reopen
1.3.6.1.4.1.2356.800.3.2332.3.2.8Nodegs2328fARPIPDoSPrevention
1.3.6.1.4.1.2356.800.3.2332.3.2.8.1Scalargs2328fARPIPDoSPreventionTCPModeread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.2.8.2Scalargs2328fARPIPDoSPreventionUDPModeread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.2.8.3Scalargs2328fARPIPDoSPreventionICMPModeread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.2.8.4Scalargs2328fARPIPDoSPreventionServerPort1read-writecurrentPort, range: 0 - port number. 0: none.
1.3.6.1.4.1.2356.800.3.2332.3.2.8.5Scalargs2328fARPIPDoSPreventionServerPort2read-writecurrentPort, range: 0 - port number. 0: none.
1.3.6.1.4.1.2356.800.3.2332.3.2.8.6Scalargs2328fARPIPDoSPreventionServerPort3read-writecurrentPort, range: 0 - port number. 0: none.
1.3.6.1.4.1.2356.800.3.2332.3.2.8.7Scalargs2328fARPIPDoSPreventionServerPort4read-writecurrentPort, range: 0 - port number. 0: none.
1.3.6.1.4.1.2356.800.3.2332.3.3Nodegs2328fDHCPSnooping
1.3.6.1.4.1.2356.800.3.2332.3.3.1Nodegs2328fDHCPSnoopingConf
1.3.6.1.4.1.2356.800.3.2332.3.3.1.1Scalargs2328fDHCPSnoopingModeread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.3.1.2Tablegs2328fDHCPSnoopingPortModeConfigurationTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.1.2.1Rowgs2328fDHCPSnoopingPortModeConfigurationEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.1.2.1.1Columngs2328fDHCPSnoopingPortModeConfigurationPortnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.1.2.1.2Columngs2328fDHCPSnoopingPortModeConfigurationModeread-writecurrentdefault: 1 0: trust port mode 1: untrust port mode
1.3.6.1.4.1.2356.800.3.2332.3.3.2Tablegs2328fDHCPSnoopingStatisticsTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1Rowgs2328fDHCPSnoopingStatisticsEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.1Columngs2328fDHCPSnoopingStatisticsPortnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.2Columngs2328fDHCPSnoopingStatisticsClearread-writecurrentdefault: 0 0: none 1: clear
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.3Columngs2328fDHCPSnoopingRxDiscoverread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.4Columngs2328fDHCPSnoopingRxOfferread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.5Columngs2328fDHCPSnoopingRxRequestread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.6Columngs2328fDHCPSnoopingRxDeclineread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.7Columngs2328fDHCPSnoopingRxACKread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.8Columngs2328fDHCPSnoopingRxNAKread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.9Columngs2328fDHCPSnoopingRxReleaseread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.10Columngs2328fDHCPSnoopingRxInformread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.11Columngs2328fDHCPSnoopingRxLeaseQueryread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.12Columngs2328fDHCPSnoopingRxLeaseUnassignedread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.13Columngs2328fDHCPSnoopingRxLeaseUnknownread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.14Columngs2328fDHCPSnoopingRxLeaseActiveread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.15Columngs2328fDHCPSnoopingTxDiscoverread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.16Columngs2328fDHCPSnoopingTxOfferread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.17Columngs2328fDHCPSnoopingTxRequestread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.18Columngs2328fDHCPSnoopingTxDeclineread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.19Columngs2328fDHCPSnoopingTxACKread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.20Columngs2328fDHCPSnoopingTxNAKread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.21Columngs2328fDHCPSnoopingTxReleaseread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.22Columngs2328fDHCPSnoopingTxInformread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.23Columngs2328fDHCPSnoopingTxLeaseQueryread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.24Columngs2328fDHCPSnoopingTxLeaseUnassignedread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.25Columngs2328fDHCPSnoopingTxLeaseUnknownread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.3.2.1.26Columngs2328fDHCPSnoopingTxLeaseActiveread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.4Nodegs2328fDHCPRelay
1.3.6.1.4.1.2356.800.3.2332.3.4.1Nodegs2328fDHCPRelayConfiguration
1.3.6.1.4.1.2356.800.3.2332.3.4.1.1Scalargs2328fDHCPRelayModeread-writecurrentdefault: 0 0: disable 1: enable We need at least one server
1.3.6.1.4.1.2356.800.3.2332.3.4.1.2Scalargs2328fDHCPRelayServerread-writecurrent
1.3.6.1.4.1.2356.800.3.2332.3.4.1.3Scalargs2328fDHCPRelayInformationModeread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.4.1.4Scalargs2328fDHCPRelayInformationPolicyread-writecurrentdefault: 0 0: replace 1: keep 2: drop
1.3.6.1.4.1.2356.800.3.2332.3.4.1.5Nodegs2328fDHCPRelayConfigurationGateways
1.3.6.1.4.1.2356.800.3.2332.3.4.1.5.1Scalargs2328fDHCPRelayConfigurationGatewaysCreateread-writecurrentdefault: 0 0 : None (read only) 1 : Create entry
1.3.6.1.4.1.2356.800.3.2332.3.4.1.5.2Tablegs2328fDHCPRelayConfigurationGatewaysTablenot-accessiblecurrentCreate DHCP Relay Gateway IP address entry.
1.3.6.1.4.1.2356.800.3.2332.3.4.1.5.2.1Rowgs2328fDHCPRelayConfigurationGatewaysEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.4.1.5.2.1.1Columngs2328fDHCPRelayConfigurationGatewaysIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.4.1.5.2.1.2Columngs2328fDHCPRelayConfigurationGatewaysVLANIdread-writecurrentVLAN ID
1.3.6.1.4.1.2356.800.3.2332.3.4.1.5.2.1.3Columngs2328fDHCPRelayConfigurationGatewaysIPread-writecurrentDHCP GIADDR address.
1.3.6.1.4.1.2356.800.3.2332.3.4.1.5.2.1.4Columngs2328fDHCPRelayConfigurationGatewaysRowStatusread-writecurrent1: active 2: notInservice 4: destroy 5: undo
1.3.6.1.4.1.2356.800.3.2332.3.4.1.1500Scalargs2328fDHCPRelayInformationCustomread-writecurrentDHCP Option 82 Circuit ID custom information
1.3.6.1.4.1.2356.800.3.2332.3.4.2Nodegs2328fDHCPRelayStatistics
1.3.6.1.4.1.2356.800.3.2332.3.4.2.1Nodegs2328fDHCPRelayServerStatistics
1.3.6.1.4.1.2356.800.3.2332.3.4.2.1.1Scalargs2328fServerStatTransmitToServerread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.4.2.1.2Scalargs2328fServerStatTransmitErrorread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.4.2.1.3Scalargs2328fServerStatReceiveFromServerread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.4.2.1.4Scalargs2328fServerStatReceiveMissingAgentOptionread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.4.2.1.5Scalargs2328fServerStatReceiveMissingCircuitIDread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.4.2.1.6Scalargs2328fServerStatReceiveMissingRemoteIDread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.4.2.1.7Scalargs2328fServerStatReceiveBadCircuitIDread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.4.2.1.8Scalargs2328fServerStatReceiveBadRemoteIDread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.4.2.2Nodegs2328fDHCPRelayClientStatistics
1.3.6.1.4.1.2356.800.3.2332.3.4.2.2.1Scalargs2328fClientStatTransmitToClientread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.4.2.2.2Scalargs2328fClientStatTransmitErrorread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.4.2.2.3Scalargs2328fClientStatReceivefromClientread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.4.2.2.4Scalargs2328fClientStatReceiveAgentOptionread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.4.2.2.5Scalargs2328fClientStatReplaceAgentOptionread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.4.2.2.6Scalargs2328fClientStatKeepAgentOptionread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.4.2.2.7Scalargs2328fClientStatDropAgentOptionread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.5Nodegs2328fPortSecurity
1.3.6.1.4.1.2356.800.3.2332.3.5.1Nodegs2328fPortSecLimitCtrl
1.3.6.1.4.1.2356.800.3.2332.3.5.1.1Nodegs2328fPortSecLimitCtrlSystemConf
1.3.6.1.4.1.2356.800.3.2332.3.5.1.1.1Scalargs2328fPortSecurityModeread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.5.1.1.2Scalargs2328fPortSecurityAgingread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.5.1.1.3Scalargs2328fPortSecurityAgingPeriodread-writecurrentdefault: 3600, range: 10-10000000
1.3.6.1.4.1.2356.800.3.2332.3.5.1.2Tablegs2328fPortSecLimitCtrlTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.5.1.2.1Rowgs2328fPortSecLimitCtrlEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.5.1.2.1.1Columngs2328fPortSecLimitCtrlPortnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.5.1.2.1.2Columngs2328fPortSecLimitCtrlPortModeread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.5.1.2.1.3Columngs2328fPortSecLimitCtrlPortLimitread-writecurrentdefault: 4, range: 1-1024
1.3.6.1.4.1.2356.800.3.2332.3.5.1.2.1.4Columngs2328fPortSecLimitCtrlPortActionread-writecurrentdefault: 0 0: none 1: trap 2: shutdown 3: trap&shutdown
1.3.6.1.4.1.2356.800.3.2332.3.5.1.2.1.5Columngs2328fPortSecLimitCtrlPortStateread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.5.1.2.1.6Columngs2328fPortSecLimitCtrlPortReOpenread-writecurrentdefault: 0 0: none 1: reopen
1.3.6.1.4.1.2356.800.3.2332.3.5.2Tablegs2328fPortSecSwitchStatusTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.5.2.1Rowgs2328fPortSecSwitchStatusEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.5.2.1.1Columngs2328fPortSecSwitchStatusPortnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.5.2.1.2Columngs2328fPortSecSwitchStatusUsersread-onlycurrentUsers Abbr: L = Limit Control, 8 = 802.1X, D = DHCP Snooping, V = Voice VLAN, '-' means that the corresponding user module is not enabled.
1.3.6.1.4.1.2356.800.3.2332.3.5.2.1.3Columngs2328fPortSecSwitchStatusStateread-onlycurrentShows the current state of the port : Disabled, Ready, Limit Reached, Shutdown.
1.3.6.1.4.1.2356.800.3.2332.3.5.2.1.4Columngs2328fPortSecSwitchStatusMACCountCurrentread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.5.2.1.5Columngs2328fPortSecSwitchStatusMACCountLimitread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.5.3Nodegs2328fPortSecPortStatus
1.3.6.1.4.1.2356.800.3.2332.3.5.3.1Scalargs2328fPortSecPortStatusPortread-writecurrentport number default: 1 range: 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.3.5.3.2Tablegs2328fPortSecPortStatusTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.5.3.2.1Rowgs2328fPortSecPortStatusEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.5.3.2.1.1Columngs2328fPortSecPortStatusIndexnot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.5.3.2.1.2Columngs2328fPortSecPortStatusMACAddressread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.5.3.2.1.3Columngs2328fPortSecPortStatusVLANIdread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.5.3.2.1.4Columngs2328fPortSecPortStatusStateread-onlycurrentBlocked / Forwarding
1.3.6.1.4.1.2356.800.3.2332.3.5.3.2.1.5Columngs2328fPortSecPortStatusTimeOfAdditionread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.5.3.2.1.6Columngs2328fPortSecPortStatusAgeAndHoldread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.6Nodegs2328fAccessManagement
1.3.6.1.4.1.2356.800.3.2332.3.6.1Nodegs2328fAccessMgtConf
1.3.6.1.4.1.2356.800.3.2332.3.6.1.1Scalargs2328fAccessMgtConfModeread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.6.1.2Scalargs2328fAccessMgtConfCreateread-writecurrentdefault: 0 0: none 1: create
1.3.6.1.4.1.2356.800.3.2332.3.6.1.3Tablegs2328fAccessMgtConfTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.6.1.3.1Rowgs2328fAccessMgtConfEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.6.1.3.1.1Columngs2328fAccessMgtIndexread-writecurrentSet Access Management config index range : 1-16.
1.3.6.1.4.1.2356.800.3.2332.3.6.1.3.1.2Columngs2328fAccessMgtAddresstyperead-writecurrent0: ipv4 1: ipv6
1.3.6.1.4.1.2356.800.3.2332.3.6.1.3.1.3Columngs2328fAccessMgtStartIpAddressread-writecurrentStart IP address. IP address doesn't allowed all zero or all 'ff'H.
1.3.6.1.4.1.2356.800.3.2332.3.6.1.3.1.4Columngs2328fAccessMgtEndIpAddressread-writecurrentEnd IP address. IP address doesn't allowed all zero or all 'ff'H. End ip address is not less than start ip address.
1.3.6.1.4.1.2356.800.3.2332.3.6.1.3.1.5Columngs2328fAccessMgtHttpHttpsread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.6.1.3.1.6Columngs2328fAccessMgtSNMPread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.6.1.3.1.7Columngs2328fAccessMgtTelnetSSHread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.6.1.3.1.8Columngs2328fAccessMgtRowStatusread-writecurrent1: active 2: notInservice 3: edit 4: destroy 5: undo
1.3.6.1.4.1.2356.800.3.2332.3.6.2Nodegs2328fAccessMgtStatistics
1.3.6.1.4.1.2356.800.3.2332.3.6.2.1Scalargs2328fHttpReceivedPktsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.6.2.2Scalargs2328fHttpAllowedPktsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.6.2.3Scalargs2328fHttpDiscardedPktsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.6.2.4Scalargs2328fHttpsReceivedPktsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.6.2.5Scalargs2328fHttpsAllowedPktsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.6.2.6Scalargs2328fHttpsDiscardedPktsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.6.2.7Scalargs2328fSnmpReceivedPktsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.6.2.8Scalargs2328fSnmpAllowedPktsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.6.2.9Scalargs2328fSnmpDiscardedPktsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.6.2.10Scalargs2328fTelnetReceivedPktsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.6.2.11Scalargs2328fTelnetAllowedPktsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.6.2.12Scalargs2328fTelnetDiscardedPktsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.6.2.13Scalargs2328fSSHReceivedPktsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.6.2.14Scalargs2328fSSHAllowedPktsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.6.2.15Scalargs2328fSSHDiscardedPktsread-onlycurrent
1.3.6.1.4.1.2356.800.3.2332.3.6.2.16Scalargs2328fAccessMgtStatisticsClearAllread-writecurrent0: none 1: clear
1.3.6.1.4.1.2356.800.3.2332.3.7Nodegs2328fSSH
1.3.6.1.4.1.2356.800.3.2332.3.7.1Scalargs2328fSSHModeread-writecurrentdefault: 1 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.8Nodegs2328fHTTPS
1.3.6.1.4.1.2356.800.3.2332.3.8.1Scalargs2328fHTTPSModeread-writecurrentdefault: 1 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.8.2Scalargs2328fHTTPSAutoRedirectread-writecurrentdefault: 0 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.8.3Scalargs2328fHTTPSCertRenewread-writecurrentdefault: 0 , 0: doNothing 1: renew
1.3.6.1.4.1.2356.800.3.2332.3.8.4Scalargs2328fHTTPSMinProtoVersionread-writecurrentdefault: 1 0: SSLv3 1: TLSv1 2: TLSv1.1 3: TLSv1.2
1.3.6.1.4.1.2356.800.3.2332.3.8.5Scalargs2328fHTTPModeread-writecurrentdefault: 1 0: disable 1: enable
1.3.6.1.4.1.2356.800.3.2332.3.9Nodegs2328fAuthMethod
1.3.6.1.4.1.2356.800.3.2332.3.9.1Scalargs2328fConsoleAuthMethodread-writecurrentdefault: 1 0: none 1: local 2: RADIUS 3: TACACS+
1.3.6.1.4.1.2356.800.3.2332.3.9.2Scalargs2328fConsoleFallbackread-writecurrentdefault: 0 0:disable 1:enable
1.3.6.1.4.1.2356.800.3.2332.3.9.3Scalargs2328fTelnetAuthMethodread-writecurrentdefault: 1 0: none 1: local 2: RADIUS 3: TACACS+
1.3.6.1.4.1.2356.800.3.2332.3.9.4Scalargs2328fTelnetFallbackread-writecurrentdefault: 0 0:disable 1:enable
1.3.6.1.4.1.2356.800.3.2332.3.9.5Scalargs2328fSshAuthMethodread-writecurrentdefault: 1 0: none 1: local 2: RADIUS 3: TACACS+
1.3.6.1.4.1.2356.800.3.2332.3.9.6Scalargs2328fSshFallbackread-writecurrentdefault: 0 0:disable 1:enable
1.3.6.1.4.1.2356.800.3.2332.3.9.9Scalargs2328fTftpAuthMethodread-writecurrentdefault: 1 0: none 1: local 2: RADIUS 3: TACACS+
1.3.6.1.4.1.2356.800.3.2332.3.9.10Scalargs2328fTftpFallbackread-writecurrentdefault: 0 0:disable 1:enable
1.3.6.1.4.1.2356.800.3.2332.3.9.11Scalargs2328fLoginFailuresread-writecurrentWhen login failures mechanism is triggered,the lock minutes will prevent to login in this periods. The value '0' should deactivate this feature. range: 0-99. d…
1.3.6.1.4.1.2356.800.3.2332.3.9.12Scalargs2328fLockMinutesread-writecurrentLock time to login failures trigger. range: 1-99. default: 5.
1.3.6.1.4.1.2356.800.3.2332.3.9.13Scalargs2328fHttpAuthMethodread-writecurrentdefault: 1 0: none 1: local 2: RADIUS 3: TACACS+
1.3.6.1.4.1.2356.800.3.2332.3.9.14Scalargs2328fHttpFallbackread-writecurrentdefault: 0 0:disable 1:enable
1.3.6.1.4.1.2356.800.3.2332.3.9.15Scalargs2328fHttpsAuthMethodread-writecurrentdefault: 1 0: none 1: local 2: RADIUS 3: TACACS+
1.3.6.1.4.1.2356.800.3.2332.3.9.16Scalargs2328fHttpsFallbackread-writecurrentdefault: 0 0:disable 1:enable
1.3.6.1.4.1.2356.800.3.2332.3.10Nodegs2328fAAA
1.3.6.1.4.1.2356.800.3.2332.3.10.1Nodegs2328fAAACommonServer
1.3.6.1.4.1.2356.800.3.2332.3.10.1.1Scalargs2328fAAACommonServerTimeoutread-writecurrentThe Timeout, which can be set to a number between 3 and 3600 seconds, is the maximum time to wait for a reply from a server. If the server does not reply withi…
1.3.6.1.4.1.2356.800.3.2332.3.10.1.2Scalargs2328fAAACommonServerDeadTimeread-writecurrentThe Dead Time, which can be set to a number between 0 and 3600 seconds, is the period during which the switch will not send new requests to a server that has f…
1.3.6.1.4.1.2356.800.3.2332.3.10.2Nodegs2328fAAATACACSPlusAuthAndAccounting
1.3.6.1.4.1.2356.800.3.2332.3.10.2.1Scalargs2328fAAAAuthorizationread-writecurrentAuthorization is the action of determining what a user is allowed to do. An authorization request may indicate that the user is not authenticated. In this case…
1.3.6.1.4.1.2356.800.3.2332.3.10.2.2Scalargs2328fAAAFallbackToLocalAuthorizationread-writecurrentThis function is an auxiliary function of Authorization. When the DUT cannot communicate with TACACS+ Server normally, it will check the right/ permission leve…
1.3.6.1.4.1.2356.800.3.2332.3.10.2.3Scalargs2328fAAAAccountingread-writecurrentAccounting is typically the third action after authentication and authorization. Accounting is the action of recording what a user is doing, and/or has done. T…
1.3.6.1.4.1.2356.800.3.2332.3.10.3Tablegs2328fRADIUSAuthenticationServerTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.10.3.1Rowgs2328fRADIUSAuthenticationServerEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.10.3.1.1Columngs2328fRADIUSAuthenticationServerIndexnot-accessiblecurrentRADIUS Authentication Server index range : 1-5.
1.3.6.1.4.1.2356.800.3.2332.3.10.3.1.2Columngs2328fRADIUSAuthenticationServerEnableread-writecurrentEnable/Disable the RADIUS Authentication Server. the RADIUSAuthenticationServerEnable can be set, when IP and Secret have value
1.3.6.1.4.1.2356.800.3.2332.3.10.3.1.3Columngs2328fRADIUSAuthenticationServerIPread-writecurrentThe IP address or hostname of the RADIUS Authentication Server. IP address is expressed in dotted decimal notation.
1.3.6.1.4.1.2356.800.3.2332.3.10.3.1.4Columngs2328fRADIUSAuthenticationServerPortread-writecurrentThe UDP port to use on the RADIUS Authentication Server. If the port is set to 0 (zero), the default port (1812) is used on the RADIUS Authentication Server.
1.3.6.1.4.1.2356.800.3.2332.3.10.3.1.5Columngs2328fRADIUSAuthenticationServerSecretread-writecurrentThe secret - up to 64 characters long - shared between the RADIUS Authentication Server and the switch.
1.3.6.1.4.1.2356.800.3.2332.3.10.4Tablegs2328fRADIUSAccountingServerTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.10.4.1Rowgs2328fRADIUSAccountingServerEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.10.4.1.1Columngs2328fRADIUSAccountingServerIndexnot-accessiblecurrentRADIUS Accounting Server index range : 1-5.
1.3.6.1.4.1.2356.800.3.2332.3.10.4.1.2Columngs2328fRADIUSAccountingServerEnableread-writecurrentEnable/Disable the RADIUS Accounting Server. The RADIUSAccountingServerEnable can be set, when IP and Secret have value.
1.3.6.1.4.1.2356.800.3.2332.3.10.4.1.3Columngs2328fRADIUSAccountingServerIPread-writecurrentThe IP address or hostname of the RADIUS Accounting Server. IP address is expressed in dotted decimal notation.
1.3.6.1.4.1.2356.800.3.2332.3.10.4.1.4Columngs2328fRADIUSAccountingServerPortread-writecurrentThe UDP port to use on the RADIUS Accounting Server. If the port is set to 0 (zero), the default port (1812) is used on the RADIUS Accounting Server.
1.3.6.1.4.1.2356.800.3.2332.3.10.4.1.5Columngs2328fRADIUSAccountingServerSecretread-writecurrentThe secret - up to 64 characters long - shared between the RADIUS Accounting Server and the switch.
1.3.6.1.4.1.2356.800.3.2332.3.10.5Tablegs2328fTACACSPlusAuthenticationServerTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.10.5.1Rowgs2328fTACACSPlusAuthenticationServerEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.10.5.1.1Columngs2328fTACACSPlusAuthenticationServerIndexnot-accessiblecurrentTACACSPlus Authentication Server index range : 1-5.
1.3.6.1.4.1.2356.800.3.2332.3.10.5.1.2Columngs2328fTACACSPlusAuthenticationServerEnableread-writecurrentEnable/Disable the TACACSPlus Authentication Server. The TACACSPlusAuthenticationServerEnable can be set, when IP and Secret have value.
1.3.6.1.4.1.2356.800.3.2332.3.10.5.1.3Columngs2328fTACACSPlusAuthenticationServerIPread-writecurrentThe IP address or hostname of the TACACSPlus Authentication Server. IP address is expressed in dotted decimal notation.
1.3.6.1.4.1.2356.800.3.2332.3.10.5.1.4Columngs2328fTACACSPlusAuthenticationServerPortread-writecurrentThe UDP port to use on the TACACSPlus Authentication Server. If the port is set to 0 (zero), the default port (1812) is used on the TACACSPlus Authentication S…
1.3.6.1.4.1.2356.800.3.2332.3.10.5.1.5Columngs2328fTACACSPlusAuthenticationServerSecretread-writecurrentThe secret - up to 64 characters long - shared between the TACACSPlus Authentication Server and the switch.
1.3.6.1.4.1.2356.800.3.2332.3.10.6Tablegs2328fRADIUSStatisticsTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1Rowgs2328fRADIUSStatisticsEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.1Columngs2328fRADIUSAuthStatisticsServerIndexnot-accessiblecurrentRADIUS Authentication Server index range : 1-5.
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.2Columngs2328fRADIUSAuthStatisticsRecPktAccessAcceptsread-onlycurrentThe number of RADIUS Access-Accept packets (valid or invalid) received from the server.
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.3Columngs2328fRADIUSAuthStatisticsRecPktAccessRejectsread-onlycurrentThe number of RADIUS Access-Reject packets (valid or invalid) received from the server.
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.4Columngs2328fRADIUSAuthStatisticsRecPktAccessChallengesread-onlycurrentThe number of RADIUS Access-Challenge packets (valid or invalid) received from the server.
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.5Columngs2328fRADIUSAuthStatisticsRecPktMalformedAccResponsesread-onlycurrentThe number of malformed RADIUS Access-Response packets received from the server. Malformed packets include packets with an invalid length. Bad authenticators o…
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.6Columngs2328fRADIUSAuthStatisticsRecPktBadAuthenticatorsread-onlycurrentThe number of RADIUS Access-Response packets containing invalid authenticators or Message Authenticator attributes received from the server.
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.7Columngs2328fRADIUSAuthStatisticsRecPktUnknownTypesread-onlycurrentThe number of RADIUS packets that were received with unknown types from the server on the authentication port and dropped.
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.8Columngs2328fRADIUSAuthStatisticsRecPktDroppedread-onlycurrentThe number of RADIUS packets that were received from the server on the authentication port and dropped for some other reason.
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.9Columngs2328fRADIUSAuthStatisticsTransmitPktAccessRequestsread-onlycurrentThe number of RADIUS Access-Request packets sent to the server. This does not include retransmissions.
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.10Columngs2328fRADIUSAuthStatisticsTransmitPktAccessRetransmissionsread-onlycurrentThe number of RADIUS Access-Request packets retransmitted to the RADIUS authentication server.
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.11Columngs2328fRADIUSAuthStatisticsTransmitPktPendingRequestsread-onlycurrentThe number of RADIUS Access-Request packets destined for the server that have not yet timed out or received a response. This variable is incremented when an Ac…
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.12Columngs2328fRADIUSAuthStatisticsTransmitPktTimeoutsread-onlycurrentThe number of authentication timeouts to the server. After a timeout, the client may retry to the same server, send to a different server, or give up. A retry …
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.13Columngs2328fRADIUSAuthIPread-onlycurrentIP address and UDP port for the authentication server in question.
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.14Columngs2328fRADIUSAuthStateread-onlycurrentShows the state of the server. It takes one of the following values: Disabled: The selected server is disabled. Not Ready: The server is enabled, but IP commun…
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.15Columngs2328fRADIUSAuthRoundTripTimeread-onlycurrentThe time interval (measured in milliseconds) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from the RADIUS authe…
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.16Columngs2328fRADIUSAccountingStatisticsRecPktResponsesread-onlycurrentThe number of RADIUS packets (valid or invalid) received from the server.
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.17Columngs2328fRADIUSAccountingStatisticsRecPktMalformedResponsesread-onlycurrentThe number of malformed RADIUS packets received from the server. Malformed packets include packets with an invalid length. Bad authenticators or unknown types …
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.18Columngs2328fRADIUSAccountingStatisticsRecPktBadAuthenticatorsread-onlycurrentThe number of RADIUS packets containing invalid authenticators received from the server.
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.19Columngs2328fRADIUSAccountingStatisticsRecPktUnknownTypesread-onlycurrentThe number of RADIUS packets of unknown types that were received from the server on the accounting port.
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.20Columngs2328fRADIUSAccountingStatisticsRecPktDroppedread-onlycurrentThe number of RADIUS packets that were received from the server on the accounting port and dropped for some other reason.
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.21Columngs2328fRADIUSAccountingStatisticsTransmitPktRequestsread-onlycurrentThe number of RADIUS packets sent to the server. This does not include retransmissions.
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.22Columngs2328fRADIUSAccountingStatisticsTransmitPktRetransmissionsread-onlycurrentThe number of RADIUS packets retransmitted to the RADIUS accounting server.
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.23Columngs2328fRADIUSAccountingStatisticsTransmitPktPendingRequestsread-onlycurrentThe number of RADIUS packets destined for the server that have not yet timed out or received a response. This variable is incremented when a Request is sent an…
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.24Columngs2328fRADIUSAccountingStatisticsTransmitPktTimeoutsread-onlycurrentThe number of accounting timeouts to the server. After a timeout, the client may retry to the same server, send to a different server, or give up. A retry to t…
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.25Columngs2328fRADIUSAccountingIPread-onlycurrentIP address and UDP port for the accounting server in question.
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.26Columngs2328fRADIUSAccountingStateread-onlycurrentShows the state of the server. It takes one of the following values: Disabled: The selected server is disabled. Not Ready: The server is enabled, but IP commun…
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.27Columngs2328fRADIUSAccountingRoundTripTimeread-onlycurrentThe time interval (measured in milliseconds) between the most recent Response and the Request that matched it from the RADIUS accounting server. The granularit…
1.3.6.1.4.1.2356.800.3.2332.3.10.6.1.28Columngs2328fRADIUSStatisticsClearread-writecurrentClears the counters for the server. read: always 0 clear: set 1
1.3.6.1.4.1.2356.800.3.2332.3.11Nodegs2328fNAS
1.3.6.1.4.1.2356.800.3.2332.3.11.1Nodegs2328fNASConfiguration
1.3.6.1.4.1.2356.800.3.2332.3.11.1.1Scalargs2328fNASConfigModeread-writecurrentIndicates if NAS is globally enabled or disabled on the switch. If globally disabled, all ports are allowed forwarding of frames.
1.3.6.1.4.1.2356.800.3.2332.3.11.1.2Scalargs2328fNASConfigReauthEnabledread-writecurrentIf checked, successfully authenticated supplicants/clients are reauthenticated after the interval specified by the Reauthentication Period. Reauthentication fo…
1.3.6.1.4.1.2356.800.3.2332.3.11.1.3Scalargs2328fNASConfigReauthPeriodread-writecurrentDetermines the period, in seconds, after which a connected client must be reauthenticated. This is only active if the Reauthentication Enabled checkbox is chec…
1.3.6.1.4.1.2356.800.3.2332.3.11.1.4Scalargs2328fNASConfigEAPOLTimeoutread-writecurrentDetermines the time for retransmission of Request Identity EAPOL frames. This has no effect for MAC-based ports. range: 1 - 65535 seconds.
1.3.6.1.4.1.2356.800.3.2332.3.11.1.5Scalargs2328fNASConfigAgingPeriodread-writecurrentWhen the NAS module uses the Port Security module to secure MAC addresses, the Port Security module needs to check for activity on the MAC address in question …
1.3.6.1.4.1.2356.800.3.2332.3.11.1.6Scalargs2328fNASConfigHoldTimeread-writecurrentIf a client is denied access - either because the RADIUS server denies the client access or because the RADIUS server request times out - the client is put on …
1.3.6.1.4.1.2356.800.3.2332.3.11.1.7Scalargs2328fNASConfigRADIUSAssignedQoSEnabledread-writecurrentRADIUS-assigned QoS provides a means to centrally control the traffic class to which traffic coming from a successfully authenticated supplicant is assigned on…
1.3.6.1.4.1.2356.800.3.2332.3.11.1.8Scalargs2328fNASConfigRADIUSAssignedVLANEnabledread-writecurrentRADIUS-assigned VLAN provides a means to centrally control the VLAN on which a successfully authenticated supplicant is placed on the switch. Incoming traffic …
1.3.6.1.4.1.2356.800.3.2332.3.11.1.9Scalargs2328fNASConfigGuestVLANEnabledread-writecurrentA Guest VLAN is a special VLAN - typically with limited network access - on which 802.1X-unaware clients are placed after a network administrator-defined timeo…
1.3.6.1.4.1.2356.800.3.2332.3.11.1.10Scalargs2328fNASConfigGuestVLANIDread-writecurrentThis is the value that a port's Port VLAN ID is set to if a port is moved into the Guest VLAN. It is only changeable if the Guest VLAN option is globally enabl…
1.3.6.1.4.1.2356.800.3.2332.3.11.1.11Scalargs2328fNASConfigMaxReauthCountread-writecurrentThe number of times the switch transmits an EAPOL Request Identity frame without response before considering entering the Guest VLAN is adjusted with this sett…
1.3.6.1.4.1.2356.800.3.2332.3.11.1.12Scalargs2328fNASConfigAllowGuestVLANEAPOLSeenread-writecurrentThe switch remembers if an EAPOL frame has been received on the port for the life-time of the port. Once the switch considers whether to enter the Guest VLAN, …
1.3.6.1.4.1.2356.800.3.2332.3.11.1.13Tablegs2328fNASPortConfigTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.11.1.13.1Rowgs2328fNASPortConfigEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.11.1.13.1.1Columngs2328fNASPortConfigPortnot-accessiblecurrentport, range : 1 - port number.
1.3.6.1.4.1.2356.800.3.2332.3.11.1.13.1.2Columngs2328fNASPortConfigAdminStateread-writecurrentThis selection controls the port's authentication mode. 1: Force Authorized, 2: Force Unauthorized, 3: Port-based 802.1X, 4: Single 802.1X, 5: Multi 802.1X, 6:…
1.3.6.1.4.1.2356.800.3.2332.3.11.1.13.1.3Columngs2328fNASPortConfigRADIUSAssignedQoSEnabledread-writecurrentWhen RADIUS-Assigned QoS is both globally enabled and enabled (checked) on a given port, the switch reacts to QoS Class information carried in the RADIUS Acces…
1.3.6.1.4.1.2356.800.3.2332.3.11.1.13.1.4Columngs2328fNASPortConfigRADIUSAssignedVLANEnabledread-writecurrentWhen RADIUS-Assigned VLAN is both globally enabled and enabled (checked) for a given port, the switch reacts to VLAN ID information carried in the RADIUS Acces…
1.3.6.1.4.1.2356.800.3.2332.3.11.1.13.1.5Columngs2328fNASPortConfigGuestVLANEnabledread-writecurrentWhen Guest VLAN is both globally enabled and enabled (checked) for a given port, the switch considers moving the port into the Guest VLAN according to the rule…
1.3.6.1.4.1.2356.800.3.2332.3.11.1.13.1.6Columngs2328fNASPortConfigPortStateread-onlycurrentGlobally Disabled: NAS is globally disabled. Link Down: NAS is globally enabled, but there is no link on the port. Authorized: The port is in Force Authorized …
1.3.6.1.4.1.2356.800.3.2332.3.11.1.13.1.7Columngs2328fNASPortConfigReauthenticateread-writecurrentSchedules a reauthentication whenever the quiet-period of the port runs out (EAPOL-based authentication). For MAC-based authentication, reauthentication will b…
1.3.6.1.4.1.2356.800.3.2332.3.11.1.13.1.8Columngs2328fNASPortConfigReinitializeread-writecurrentForces a reinitialization of the clients on the port and thereby a reauthentication immediately. The clients will transfer to the unauthorized state while the …
1.3.6.1.4.1.2356.800.3.2332.3.11.1.13.1.101Columngs2328fNASPortConfigFallbackEnabledread-writecurrentWhen Fallback is enabled, the switch will take over the supplicants role after max reauthentication count is reached and tries to authenticate the client on it…
1.3.6.1.4.1.2356.800.3.2332.3.11.1.101Scalargs2328fNASConfigMacBasedUseEAPread-writecurrentThe switch can do the RADIUS authentication on behalf of the client in the MAC-based Auth. port authentication mode. It can either present itself as a normal 8…
1.3.6.1.4.1.2356.800.3.2332.3.11.2Tablegs2328fNASSwitchStatusTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.11.2.1Rowgs2328fNASSwitchStatusEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.11.2.1.2Columngs2328fNASSwitchStatusAdminStateread-onlycurrentThe port's current administrative state. Refer to NAS Admin State for a description of possible values.
1.3.6.1.4.1.2356.800.3.2332.3.11.2.1.3Columngs2328fNASSwitchStatusPortStateread-onlycurrentThe current state of the port. Refer to NAS Port State for a description of the individual states.
1.3.6.1.4.1.2356.800.3.2332.3.11.2.1.4Columngs2328fNASSwitchStatusLastSourceread-onlycurrentThe source MAC address carried in the most recently received EAPOL frame for EAPOL-based authentication, and the most recently received frame from a new client…
1.3.6.1.4.1.2356.800.3.2332.3.11.2.1.5Columngs2328fNASSwitchStatusLastIDread-onlycurrentThe user name (supplicant identity) carried in the most recently received Response Identity EAPOL frame for EAPOL-based authentication, and the source MAC addr…
1.3.6.1.4.1.2356.800.3.2332.3.11.2.1.6Columngs2328fNASSwitchStatusQoSClassread-onlycurrentQoS Class assigned to the port by the RADIUS server if enabled.
1.3.6.1.4.1.2356.800.3.2332.3.11.2.1.7Columngs2328fNASSwitchStatusPortVlanIDread-onlycurrentThe VLAN ID that NAS has put the port in. The field is blank, if the Port VLAN ID is not overridden by NAS.
1.3.6.1.4.1.2356.800.3.2332.3.11.3Nodegs2328fNASPortStatus
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1Tablegs2328fNASPortStatusCountersTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1Rowgs2328fNASPortStatusCountersEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1.2Columngs2328fNASRxCountersEAPOLTotalread-onlycurrentThe number of valid EAPOL frames of any type that have been received by the switch.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1.3Columngs2328fNASRxCountersEAPOLResponseIDread-onlycurrentThe number of valid EAPOL Response Identity frames that have been received by the switch.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1.4Columngs2328fNASRxCountersEAPOLResponsesread-onlycurrentThe number of valid EAPOL response frames (other than Response Identity frames) that have been received by the switch.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1.5Columngs2328fNASRxCountersEAPOLStartread-onlycurrentThe number of EAPOL Start frames that have been received by the switch.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1.6Columngs2328fNASRxCountersEAPOLLogoffread-onlycurrentThe number of valid EAPOL Logoff frames that have been received by the switch.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1.7Columngs2328fNASRxCountersEAPOLInvalidTyperead-onlycurrentThe number of EAPOL frames that have been received by the switch in which the frame type is not recognized.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1.8Columngs2328fNASRxCountersEAPOLInvalidLengthread-onlycurrentThe number of EAPOL frames that have been received by the switch in which the Packet Body Length field is invalid.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1.9Columngs2328fNASTxCountersEAPOLTotalread-onlycurrentThe number of EAPOL frames of any type that have been transmitted by the switch.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1.10Columngs2328fNASTxCountersEAPOLRequestIDread-onlycurrentThe number of EAPOL Request Identity frames that have been transmitted by the switch.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1.11Columngs2328fNASTxCountersEAPOLRequestsread-onlycurrentThe number of valid EAPOL Request frames (other than Request Identity frames) that have been transmitted by the switch.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1.12Columngs2328fNASRxBackendServerCountersAccessChallengesread-onlycurrent802.1X-based: Counts the number of times that the switch receives the first request from the backend server following the first response from the supplicant. M…
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1.13Columngs2328fNASRxBackendServerCountersOtherRequestsread-onlycurrent802.1X-based: Counts the number of times that the switch sends an EAP Request packet following the first to the supplicant. MAC-based: Not applicable.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1.14Columngs2328fNASRxBackendServerCountersAuthSuccessesread-onlycurrentCounts the number of times that the switch receives a success indication. Indicates that the supplicant/client has successfully authenticated to the backend se…
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1.15Columngs2328fNASRxBackendServerCountersAuthFailuresread-onlycurrentCounts the number of times that the switch receives a failure message. This indicates that the supplicant/client has not authenticated to the backend server.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1.16Columngs2328fNASTxBackendServerCountersResponsesread-onlycurrent802.1X-based: Counts the number of times that the switch attempts to send a supplicant's first response packet to the backend server. Indicates the switch atte…
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1.17Columngs2328fNASLastSupplicantInfoMACAddressread-onlycurrentThe MAC address of the last supplicant/client.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1.18Columngs2328fNASLastSupplicantInfoVlanIDread-onlycurrentThe VLAN ID on which the last frame from the last supplicant/client was received.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1.19Columngs2328fNASLastSupplicantInfoVersionread-onlycurrent802.1X-based: The protocol version number carried in the most recently received EAPOL frame. MAC-based: Not applicable.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1.20Columngs2328fNASLastSupplicantInfoIdentityread-onlycurrent802.1X-based: The user name (supplicant identity) carried in the most recently received Response Identity EAPOL frame. MAC-based: Not applicable.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.1.1.21Columngs2328fNASCountersDoClearread-writecurrentClear the counters for the selected port.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2Tablegs2328fNASPortStatusClientsTablenot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1Rowgs2328fNASPortStatusClientsEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.1Columngs2328fNASClientsIndexnot-accessiblecurrentEntry of client table in the port.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.2Columngs2328fNASClientsIdentityread-onlycurrentShows the identity of the supplicant, as received in the Response Identity EAPOL frame.This isn't available for MAC-based Auth.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.3Columngs2328fNASClientsMACAddressread-onlycurrentMulti 802.1X, this column holds the MAC address of the attached supplicant. MAC-based Auth., this column holds the MAC address of the attached client.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.4Columngs2328fNASClientsVlanIDread-onlycurrentThis column holds the VLAN ID that the corresponding client is currently secured through the Port Security module.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.5Columngs2328fNASClientsStateread-onlycurrentThe client can either be authenticated or unauthenticated. In the authenticated state, it is allowed to forward frames on the port, and in the unauthenticated …
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.6Columngs2328fNASClientsLastAuthread-onlycurrentShows the date and time of the last authentication of the client.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.7Columngs2328fNASRxClientsEAPOLTotalread-onlycurrentThe number of valid EAPOL frames of any type that have been received by the switch.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.8Columngs2328fNASRxClientsEAPOLResponseIDread-onlycurrentThe number of valid EAPOL Response Identity frames that have been received by the switch.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.9Columngs2328fNASRxClientsEAPOLResponsesread-onlycurrentThe number of valid EAPOL response frames (other than Response Identity frames) that have been received by the switch.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.10Columngs2328fNASRxClientsEAPOLStartread-onlycurrentThe number of EAPOL Start frames that have been received by the switch.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.11Columngs2328fNASRxClientsEAPOLLogoffread-onlycurrentThe number of valid EAPOL Logoff frames that have been received by the switch.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.12Columngs2328fNASRxClientsEAPOLInvalidTyperead-onlycurrentThe number of EAPOL frames that have been received by the switch in which the frame type is not recognized.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.13Columngs2328fNASRxClientsEAPOLInvalidLengthread-onlycurrentThe number of EAPOL frames that have been received by the switch in which the Packet Body Length field is invalid.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.14Columngs2328fNASTxClientsEAPOLTotalread-onlycurrentThe number of EAPOL frames of any type that have been transmitted by the switch.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.15Columngs2328fNASTxClientsEAPOLRequestIDread-onlycurrentThe number of EAPOL Request Identity frames that have been transmitted by the switch.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.16Columngs2328fNASTxClientsEAPOLRequestsread-onlycurrentThe number of valid EAPOL Request frames (other than Request Identity frames) that have been transmitted by the switch.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.17Columngs2328fNASRxBackendServerClientsAccessChallengesread-onlycurrent802.1X-based: Counts the number of times that the switch receives the first request from the backend server following the first response from the supplicant. M…
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.18Columngs2328fNASRxBackendServerClientsOtherRequestsread-onlycurrent802.1X-based: Counts the number of times that the switch sends an EAP Request packet following the first to the supplicant. MAC-based: Not applicable.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.19Columngs2328fNASRxBackendServerClientsAuthSuccessesread-onlycurrentCounts the number of times that the switch receives a success indication. Indicates that the supplicant/client has successfully authenticated to the backend se…
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.20Columngs2328fNASRxBackendServerClientsAuthFailuresread-onlycurrentCounts the number of times that the switch receives a failure message. This indicates that the supplicant/client has not authenticated to the backend server.
1.3.6.1.4.1.2356.800.3.2332.3.11.3.2.1.21Columngs2328fNASTxBackendServerClientsResponsesread-onlycurrent802.1X-based: Counts the number of times that the switch attempts to send a supplicant's first response packet to the backend server. Indicates the switch atte…
1.3.6.1.4.1.2356.800.3.2332.4Nodegs2328fMaintenance
1.3.6.1.4.1.2356.800.3.2332.4.1Scalargs2328fRestartDeviceread-writecurrentdefault: 0 0:none 1:yes
1.3.6.1.4.1.2356.800.3.2332.4.2Nodegs2328fFirmware
1.3.6.1.4.1.2356.800.3.2332.4.2.1Scalargs2328fFirmwareIpAddressread-writecurrentGet/Set the firmware tftp server.
1.3.6.1.4.1.2356.800.3.2332.4.2.2Scalargs2328fFirmwareFileNameread-writecurrentGet/Set the path and filename for firmware upgrading.
1.3.6.1.4.1.2356.800.3.2332.4.2.3Scalargs2328fDoFirmwareUpgraderead-writecurrentDo firmware upgrade. Get this OID always return zero. 1 - do firmware upgrade. 0 - do nothing.
1.3.6.1.4.1.2356.800.3.2332.4.3Nodegs2328fSaveOrRestore
1.3.6.1.4.1.2356.800.3.2332.4.3.1Scalargs2328fFactoryDefaultsread-writecurrentdefault: 0 0:none 1:yes
1.3.6.1.4.1.2356.800.3.2332.4.3.2Scalargs2328fSaveStartread-writecurrentdefault: 0 0:none 1:yes
1.3.6.1.4.1.2356.800.3.2332.4.3.3Scalargs2328fSaveUserread-writecurrentdefault: 0 0:none 1:yes
1.3.6.1.4.1.2356.800.3.2332.4.3.4Scalargs2328fRestoreUserread-writecurrentdefault: 0 0:none 1:yes
1.3.6.1.4.1.2356.800.3.2332.4.4Nodegs2328fExportOrImport
1.3.6.1.4.1.2356.800.3.2332.4.4.1Scalargs2328fExportIpAddressread-writecurrentGet/Set the export tftp server.
1.3.6.1.4.1.2356.800.3.2332.4.4.2Scalargs2328fExportConfigNameread-writecurrentGet/Set the export file path and name.
1.3.6.1.4.1.2356.800.3.2332.4.4.3Scalargs2328fDoExportConfigread-writecurrentDo export-config. Get this OID always return zero. 1 - export.
1.3.6.1.4.1.2356.800.3.2332.4.4.4Scalargs2328fImportIpAddressread-writecurrentGet/Set the import tftp server.
1.3.6.1.4.1.2356.800.3.2332.4.4.5Scalargs2328fImportConfigNameread-writecurrentGet/Set the import file path and name.
1.3.6.1.4.1.2356.800.3.2332.4.4.6Scalargs2328fDoImportConfigread-writecurrentDo export-config. Get this OID always return zero. 1 - import.
1.3.6.1.4.1.2356.800.3.2332.4.5Nodegs2328fDiagnostics
1.3.6.1.4.1.2356.800.3.2332.4.5.1Scalargs2328fPingIpAddressread-writecurrentThe destination IP Address.
1.3.6.1.4.1.2356.800.3.2332.4.5.2Scalargs2328fPingSizeread-writecurrentSize of ICMP echo packet. range : 60-1400, default : 64.
1.3.6.1.4.1.2356.800.3.2332.4.5.3Scalargs2328fDoPingConfigread-writecurrentDo ping-config. Get this OID always return zero. 1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram to elicit an ICMP ECHO_RESPONSE from a host…
1.3.6.1.4.1.2356.800.3.2332.4.5.4Scalargs2328fPingResultread-onlycurrentShow ping result.
1.3.6.1.4.1.2356.800.3.2332.4.5.5Scalargs2328fPing6IpAddressread-writecurrentThe destination IPv6 Address.
1.3.6.1.4.1.2356.800.3.2332.4.5.6Scalargs2328fPing6Sizeread-writecurrentSize of ICMP echo packet. range : 60-1400.
1.3.6.1.4.1.2356.800.3.2332.4.5.7Scalargs2328fDoPing6Configread-writecurrentDo ping-config. Get this OID always return zero. 1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram to elicit an ICMP ECHO_RESPONSE from a host…
1.3.6.1.4.1.2356.800.3.2332.4.5.8Scalargs2328fPing6Resultread-onlycurrentShow ping result.
1.3.6.1.4.1.2356.800.3.2332.4.1500Scalargs2328fColdRestartDeviceread-writecurrentdefault: 0 0:none 1:yes
1.3.6.1.4.1.2356.800.3.2332.5Nodegs2328fTrap
1.3.6.1.4.1.2356.800.3.2332.5.1Nodegs2328fTrapEvent
1.3.6.1.4.1.2356.800.3.2332.5.1.1Notificationgs2328fEmergencycurrentThe severity level is Emergency. The system is unusable.
1.3.6.1.4.1.2356.800.3.2332.5.1.2Notificationgs2328fAlertcurrentThe severity level is Alert. The action must be taken immediately.
1.3.6.1.4.1.2356.800.3.2332.5.1.3Notificationgs2328fCriticalcurrentThe severity level is Critical. Critical conditions.
1.3.6.1.4.1.2356.800.3.2332.5.1.4Notificationgs2328fErrorcurrentThe severity level is Error. Error conditions.
1.3.6.1.4.1.2356.800.3.2332.5.1.5Notificationgs2328fWarningcurrentThe severity level is Warning. Warning conditions.
1.3.6.1.4.1.2356.800.3.2332.5.1.6Notificationgs2328fNoticecurrentThe severity level is Notice. Normal but significant condition.
1.3.6.1.4.1.2356.800.3.2332.5.1.7Notificationgs2328fInformationalcurrentThe severity level is Informational. Informational messages.
1.3.6.1.4.1.2356.800.3.2332.5.1.8Notificationgs2328fDebugcurrentThe severity level is Debug. debug-level messages.
1.3.6.1.4.1.2356.800.3.2332.5.2Nodegs2328fTrapVariable
1.3.6.1.4.1.2356.800.3.2332.5.2.1Scalargs2328fInformationread-onlycurrentTrap information.
MIB Viewer