LANCOM-RADIUS-AUTH-CLIENT-MIB
91 objects
The Broadcom Private MIB for FastPath Radius Authentication Client
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| LANCOM-REF-MIB | fastPath |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2356.16.1.8 | IdentityfastPathRadius | The Broadcom Private MIB for FastPath Radius Authentication Client | ||
| 1.3.6.1.4.1.2356.16.1.8.1 | NodeagentRadiusConfigGroup | |||
| 1.3.6.1.4.1.2356.16.1.8.1.1 | ScalaragentRadiusMaxTransmit | read-write | current | Maximum number of retransmissions of a RADIUS request packet |
| 1.3.6.1.4.1.2356.16.1.8.1.2 | ScalaragentRadiusTimeout | read-write | current | Time out duration (in seconds) before packets are retransmitted |
| 1.3.6.1.4.1.2356.16.1.8.1.3 | ScalaragentRadiusAccountingMode | read-write | current | Identifies if RADIUS Accounting has been enabled or not |
| 1.3.6.1.4.1.2356.16.1.8.1.4 | ScalaragentRadiusStatsClear | read-write | current | When set to enable(1), all Radius statistics will be reset. |
| 1.3.6.1.4.1.2356.16.1.8.1.5 | ScalaragentRadiusAccountingIndexNextValid | read-only | current | Indicates the next valid index into the agentRadiusAccountingConfigTable for creation. If no additional entries are allowed, this will be 0. |
| 1.3.6.1.4.1.2356.16.1.8.1.6 | TableagentRadiusAccountingConfigTable | not-accessible | current | Table with information about Radius Accounting Server IP Addresses, port numbers and shared secret. Only one entry is supported at this time. |
| 1.3.6.1.4.1.2356.16.1.8.1.6.1 | RowagentRadiusAccountingConfigEntry | not-accessible | current | Entry consisting of configuration data for a Radius Accounting Server. |
| 1.3.6.1.4.1.2356.16.1.8.1.6.1.1 | ColumnagentRadiusAccountingServerIndex | not-accessible | current | Unique index of the configured RADIUS accounting server. The next valid value of this object for creation is specified by agentRadiusAccountingIndexNextValid. |
| 1.3.6.1.4.1.2356.16.1.8.1.6.1.2 | ColumnagentRadiusAccountingServerAddress | read-create | current | IP Address of the configured RADIUS accounting server. This object cannot be changed after creation. Specify link local address if link local interface is conf… |
| 1.3.6.1.4.1.2356.16.1.8.1.6.1.3 | ColumnagentRadiusAccountingServerAddressType | read-create | current | IP Address Type of the configured RADIUS accounting server. This object cannot be changed after creation. |
| 1.3.6.1.4.1.2356.16.1.8.1.6.1.4 | ColumnagentRadiusAccountingPort | read-write | current | Port number for the RADIUS accounting server. |
| 1.3.6.1.4.1.2356.16.1.8.1.6.1.5 | ColumnagentRadiusAccountingSecret | read-write | current | Configured shared sercret for the RADIUS accounting server. |
| 1.3.6.1.4.1.2356.16.1.8.1.6.1.6 | ColumnagentRadiusAccountingStatus | read-create | current | Creates or destroys a RADIUS accounting server entry. During creation, the next available index is specified by the agentRadiusAccountingIndexNextValid object.… |
| 1.3.6.1.4.1.2356.16.1.8.1.6.1.7 | ColumnagentRadiusAccountingServerName | read-create | current | Configured identification name for the RADIUS Accounting server. |
| 1.3.6.1.4.1.2356.16.1.8.1.6.1.8 | ColumnagentRadiusAccountingLinkLocalIntf | read-write | current | A link local interface selection on an Interface Index(Supported link local interfaces are physical interface, network port and service port). A non-zero value… |
| 1.3.6.1.4.1.2356.16.1.8.1.6.1.9 | ColumnagentRadiusAccountingServerTestUserName | read-create | current | Configured test user name for the RADIUS Accounting server. Null string indicates that automated testing is disabled for this server. |
| 1.3.6.1.4.1.2356.16.1.8.1.6.1.10 | ColumnagentRadiusAccountingServerIdleTime | read-write | current | Indicates configured time interval in minutes after which a test request is sent to RADIUS accounting server to check for its availability. It is also the maxi… |
| 1.3.6.1.4.1.2356.16.1.8.1.6.1.11 | ColumnagentRadiusAccountingServerState | read-only | current | Indicates the current state of the RADIUS accounting server. up - RADIUS accounting server is reachable and can be sent accounting requests. inactive - RADIUS … |
| 1.3.6.1.4.1.2356.16.1.8.1.6.1.12 | ColumnagentRadiusAccountingServerStateDuration | read-only | current | Indicates the duration in seconds a configured RADIUS accounting server state is in same state. This value is valid only when server state is dead or quarantin… |
| 1.3.6.1.4.1.2356.16.1.8.1.6.1.13 | ColumnagentRadiusAccountingServerImmortalState | read-only | current | Indicates the current immortal state of the RADIUS accounting server. immortal - RADIUS accounting server is not reachable and it is the last known alive serve… |
| 1.3.6.1.4.1.2356.16.1.8.1.7 | ScalaragentRadiusServerIndexNextValid | read-only | current | Indicates the next valid index into the agentRadiusServerConfigTable for creation. If no additional entries are allowed, this will be 0. |
| 1.3.6.1.4.1.2356.16.1.8.1.8 | TableagentRadiusServerConfigTable | not-accessible | current | Table with information about Radius Authentication Server IP Addresses, port numbers and shared secret |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1 | RowagentRadiusServerConfigEntry | not-accessible | current | Entry consisting of configuration data for a Radius Authentication Server. |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.1 | ColumnagentRadiusServerIndex | not-accessible | current | Unique index of the configured RADIUS server |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.2 | ColumnagentRadiusServerAddress | read-create | obsolete | IP Address of the configured RADIUS server. This object cannot be changed after creation. Specify link local address if link local interface is configured. |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.3 | ColumnagentRadiusServerAddressType | read-create | current | IP Address Type of the configured RADIUS server. This object cannot be changed after creation. |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.4 | ColumnagentRadiusServerPort | read-write | current | Port number for the RADIUS server. |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.5 | ColumnagentRadiusServerSecret | read-write | current | Configured shared sercret for the RADIUS server. |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.6 | ColumnagentRadiusServerPrimaryMode | read-write | current | Configure the RADIUS server to be the primary server. If there is any other server that is configured to be primary, that server is set to be a seconday server… |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.7 | ColumnagentRadiusServerCurrentMode | read-only | current | Indicate if the RADIUS server is the current server in user for authentication. |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.8 | ColumnagentRadiusServerMsgAuth | read-write | current | Enable or disable the message authenticator attribute for this RADIUS server. |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.9 | ColumnagentRadiusServerRowStatus | read-create | current | Creates or destroys a RADIUS Authentication server entry. During creation, the next available index is specified by the agentRadiusServerIndexNextValid object.… |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.10 | ColumnagentRadiusServerName | read-create | current | Configured identification name for the RADIUS server. |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.11 | ColumnagentRadiusServerInetAddress | read-create | current | IP Address of the configured RADIUS server. This object cannot be changed after creation. |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.12 | ColumnagentRadiusServerTimeout | read-write | current | Time out duration (in seconds) before packets are retransmitted |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.13 | ColumnagentRadiusServerRetransmit | read-write | current | Maximum number of retransmissions of a RADIUS request packet |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.14 | ColumnagentRadiusServerDeadtime | read-write | current | Length of time (in minutes) for which a RADIUS server is skipped over by transaction requests. |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.15 | ColumnagentRadiusServerSourceIPAddr | read-write | current | Source IP address that will be used for the communication with RADIUS servers. |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.16 | ColumnagentRadiusServerPriority | read-write | current | Priority specifies the order in which the servers will be used, where 0 is the highest priority in radius server config mode. |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.17 | ColumnagentRadiusServerUsageType | read-write | current | Specify the usage type of the server. |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.18 | ColumnagentRadiusServerSourceIPv6Addr | read-write | current | Source IPv6 address that will be used for the communication with RADIUS servers. |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.19 | ColumnagentRadiusServerConfigAttr31MacFormat | read-write | deprecated | To configure radius server Mac-Format i.e. Attribute 31. |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.20 | ColumnagentRadiusServerLinkLocalIntf | read-write | current | A link local interface selection on an Interface Index(supported link local interfaces are physical interface, network port and service port ). A non-zero valu… |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.21 | ColumnagentRadiusServerTestUserName | read-create | current | Configured test user name for the RADIUS Authentication server. Null string indicates that automated testing is disabled for this server. |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.22 | ColumnagentRadiusServerIdleTime | read-write | current | Indicates configured time interval in minutes after which a test request is sent to RADIUS authentication server to check for its availability. It is also the … |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.23 | ColumnagentRadiusServerState | read-only | current | Indicates the current state of the RADIUS authentication server. up - RADIUS authentication server is reachable and can be sent authentication requests. inacti… |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.24 | ColumnagentRadiusServerStateDuration | read-only | current | Indicates the duration in seconds a configured RADIUS accounting server state is in same state. This value is valid only when server state is dead or quarantin… |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.25 | ColumnagentRadiusServerImmortalState | read-only | current | Indicates the current immortal state of the RADIUS authentication server. immortal - RADIUS authentication server is not reachable and it is the last known ali… |
| 1.3.6.1.4.1.2356.16.1.8.1.8.1.26 | ColumnagentRadiusServerVSAAuth | read-write | current | Identifies if RADIUS Server can accept VSA attributes. |
| 1.3.6.1.4.1.2356.16.1.8.1.9 | ScalaragentRadiusAuthenticationServers | read-only | current | Number of RADIUS Authentication Servers that have been configured. |
| 1.3.6.1.4.1.2356.16.1.8.1.10 | ScalaragentRadiusAccountingServers | read-only | current | Number of RADIUS Accounting Servers that have been configured. |
| 1.3.6.1.4.1.2356.16.1.8.1.11 | ScalaragentRadiusNamedAuthenticationServerGroups | read-only | current | Number of configured RADIUS named Authentication Server groups. |
| 1.3.6.1.4.1.2356.16.1.8.1.12 | ScalaragentRadiusNamedAccountingServerGroups | read-only | current | Number of configured RADIUS named Accounting Server groups. |
| 1.3.6.1.4.1.2356.16.1.8.1.13 | ScalaragentRadiusDeadTime | read-write | current | Length of time (in minutes) for which a RADIUS server is skipped over by transaction requests. |
| 1.3.6.1.4.1.2356.16.1.8.1.14 | ScalaragentRadiusServerKey | read-write | current | RADIUS Server key specifies the authentication and encryption key for all RADIUS communications between the switch and the RADIUS server. This key must match t… |
| 1.3.6.1.4.1.2356.16.1.8.1.15 | ScalaragentRadiusSourceIPAddr | read-write | current | Source IP address that will be used for the communication with RADIUS servers. |
| 1.3.6.1.4.1.2356.16.1.8.1.16 | ScalaragentRadiusNasIpAddress | read-write | current | Used to set the NAS-IP address for the radius server. |
| 1.3.6.1.4.1.2356.16.1.8.1.17 | ScalaragentAuthorizationNetworkRadiusMode | read-write | current | Used to enable/disable Vlan assignment mode. |
| 1.3.6.1.4.1.2356.16.1.8.1.18 | ScalaragentRadiusSourceInterface | read-write | current | A source-interface selection on an Interface Index (like vlan based routing interface, port based routing interface, loopback interface). A non-zero value indi… |
| 1.3.6.1.4.1.2356.16.1.8.1.19 | ScalaragentDasRequestsReceived | read-only | current | Number of dynamic authorization requests received. |
| 1.3.6.1.4.1.2356.16.1.8.1.20 | ScalaragentDasACKResponsesSent | read-only | current | Number of dynamic authorization ACK responses sent. |
| 1.3.6.1.4.1.2356.16.1.8.1.21 | ScalaragentDasNAKResponsesSent | read-only | current | Number of dynamic authorization NAK responses sent. |
| 1.3.6.1.4.1.2356.16.1.8.1.22 | ScalaragentDasRequestsIgnored | read-only | current | Number of dynamic authorization requests ignored. |
| 1.3.6.1.4.1.2356.16.1.8.1.23 | ScalaragentDasRequestsWithMissingOrUnsupportedAttribute | read-only | current | Number of dynamic authorization requests received with missing or unsupported attribute. |
| 1.3.6.1.4.1.2356.16.1.8.1.24 | ScalaragentDasRequestsWithSessionContextNotFound | read-only | current | Number of dynamic authorization requests received with session context not found. |
| 1.3.6.1.4.1.2356.16.1.8.1.25 | ScalaragentDasRequestsWithInvalidAttributeValue | read-only | current | Number of dynamic authorization requests received with invalid attribute value. |
| 1.3.6.1.4.1.2356.16.1.8.1.26 | ScalaragentDasRequestsAdministrativelyProhibited | read-only | current | Number of dynamic authorization requests administratively prohibited. |
| 1.3.6.1.4.1.2356.16.1.8.1.27 | ScalaragentRadiusServicePortSrcInterface | read-write | current | To select Service Port as a source-interface. |
| 1.3.6.1.4.1.2356.16.1.8.1.28 | ScalaragentRadiusNasIpv6Address | read-write | current | Used to set the NAS-IPv6 address for the radius server. |
| 1.3.6.1.4.1.2356.16.1.8.1.29 | ScalaragentRadiusServerAttr31MacFormat | read-write | current | To configure radius server Attribute 31 Mac-Format. |
| 1.3.6.1.4.1.2356.16.1.8.1.30 | ScalaragentRadiusServerAttr30MacFormat | read-write | current | To configure radius server Attribute 30 Mac-Format. |
| 1.3.6.1.4.1.2356.16.1.8.1.31 | ScalaragentRadiusServerAttr32MacFormat | read-write | current | To configure radius server Attribute 32 Mac-Format. |
| 1.3.6.1.4.1.2356.16.1.8.1.32 | ScalaragentRadiusServerInclude32InAccessRequest | read-write | current | To include Attribute 32 in Access and Accounting requests or not. Configuring this to 'doNotInclude' will set agentRadiusServerInclude32InAccessRequestFormat t… |
| 1.3.6.1.4.1.2356.16.1.8.1.33 | ScalaragentRadiusServerInclude32InAccessRequestFormat | read-write | current | To configure radius server Attribute 32 format to be sent in Access and Accounting requests. This can only be configured if agentRadiusServerInclude32InAccessR… |
| 1.3.6.1.4.1.2356.16.1.8.1.34 | ScalaragentRadiusServerInclude44InAccessRequest | read-write | current | To include Attribute 44 in Access and Accounting requests or not. |
| 1.3.6.1.4.1.2356.16.1.8.1.35 | TableagentRadiusNamedAuthenticationServerGroupConfigTable | not-accessible | current | Table with information about RADIUS named Authentication Server groups. |
| 1.3.6.1.4.1.2356.16.1.8.1.35.1 | RowagentRadiusNamedAuthenticationServerGroupConfigEntry | not-accessible | current | Entry consisting of configuration data for a RADIUS named Authentication Server group. |
| 1.3.6.1.4.1.2356.16.1.8.1.35.1.1 | ColumnagentRadiusNamedAuthenticationServerGroupName | not-accessible | current | Configured identification name of a RADIUS authentication server. |
| 1.3.6.1.4.1.2356.16.1.8.1.35.1.2 | ColumnagentRadiusNamedAuthenticationServerGroupLoadBalanceMethod | read-write | current | Configured load balancing method for a RADIUS authentication server group. none - No Load Balancing is perform among the member servers of the server group lea… |
| 1.3.6.1.4.1.2356.16.1.8.1.35.1.3 | ColumnagentRadiusNamedAuthenticationServerGroupBatchSize | read-write | current | Maximum number of RADIUS request packets a RADIUS authentication server that can be allowed to be pending response before determining that the server is busy. … |
| 1.3.6.1.4.1.2356.16.1.8.1.35.1.4 | ColumnagentRadiusNamedAuthenticationServerGroupDeadCount | read-only | current | Number of RADIUS authentication servers that are part of the named server group in dead state |
| 1.3.6.1.4.1.2356.16.1.8.1.36 | TableagentRadiusNamedAccountingServerGroupConfigTable | not-accessible | current | Table with information about RADIUS named Accounting Server groups. |
| 1.3.6.1.4.1.2356.16.1.8.1.36.1 | RowagentRadiusNamedAccountingServerGroupConfigEntry | not-accessible | current | Entry consisting of configuration data for a RADIUS named Accounting Server group. |
| 1.3.6.1.4.1.2356.16.1.8.1.36.1.1 | ColumnagentRadiusNamedAccountingServerGroupName | not-accessible | current | Configured identification name of a RADIUS accounting server. |
| 1.3.6.1.4.1.2356.16.1.8.1.36.1.2 | ColumnagentRadiusNamedAccountingServerGroupLoadBalanceMethod | read-write | current | Configured load balancing method for a RADIUS accounting server group. none - No Load Balancing is perform among the member servers of the server group least-o… |
| 1.3.6.1.4.1.2356.16.1.8.1.36.1.3 | ColumnagentRadiusNamedAccountingServerGroupBatchSize | read-write | current | Maximum number of RADIUS request packets a RADIUS accounting server that can be allowed to be pending response before determining that the server is busy. This… |
| 1.3.6.1.4.1.2356.16.1.8.1.36.1.4 | ColumnagentRadiusNamedAccountingServerGroupDeadCount | read-only | current | Number of RADIUS accounting servers that are part of the named server group in dead state |
| 1.3.6.1.4.1.2356.16.1.8.1.37 | ScalaragentRadiusServerDeadCriteriaTime | read-write | current | Length of time (in seconds) during which a valid response from the RADIUS server may not be expected. This is used as a criteria to determine if the RADIUS ser… |
| 1.3.6.1.4.1.2356.16.1.8.1.38 | ScalaragentRadiusServerDeadCriteriaTries | read-write | current | Indicates the number of consecutive requests that have timed out after retransmitting them to RADIUS server. This is used as a criteria to determine if the RAD… |