MIB Viewer

LANCOM-SWITCHING-MIB

1287 objects
The Broadcom Private MIB for FastPath Switching
Imported Objects
IANAifType-MIBIANAifType
IF-MIBifIndex InterfaceIndex InterfaceIndexOrZero
INET-ADDRESS-MIBInetAddress InetAddressType InetPortNumber
LANCOM-LOGGING-MIBAgentLogSeverity
LANCOM-REF-MIBAgentPortMask fastPath
Q-BRIDGE-MIBdot1qFdbId dot1qVlanIndex VlanId VlanIdOrNone VlanIndex
RFC1213-MIBDisplayString PhysAddress
SNMPv2-SMICounter32 Counter64 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCDateAndTime MacAddress RowStatus TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.2356.16.1.1IdentityfastPathSwitchingThe Broadcom Private MIB for FastPath Switching
1.3.6.1.4.1.2356.16.1.1.0NodefastPathSwitchingTraps
1.3.6.1.4.1.2356.16.1.1.0.1NotificationmultipleUsersTrapcurrentThis trap is sent when more than one user is logged in with administrative access. Only applies to CLI interface.
1.3.6.1.4.1.2356.16.1.1.0.2NotificationbroadcastStormStartTrapobsoleteThis trap is sent when a broadcast storm is detected.
1.3.6.1.4.1.2356.16.1.1.0.3NotificationbroadcastStormEndTrapobsoleteThis trap is sent when a broadcast storm is no longer detected.
1.3.6.1.4.1.2356.16.1.1.0.4NotificationlinkFailureTrapobsolete
1.3.6.1.4.1.2356.16.1.1.0.5NotificationvlanRequestFailureTrapobsolete
1.3.6.1.4.1.2356.16.1.1.0.6NotificationvlanDeleteLastTrapcurrentTrap is sent when attempting to delete the last configured VLAN or the Default VLAN.
1.3.6.1.4.1.2356.16.1.1.0.7NotificationvlanDefaultCfgFailureTrapcurrentTrap is sent if there are failures in resetting VLAN configuration to defaults.
1.3.6.1.4.1.2356.16.1.1.0.8NotificationvlanRestoreFailureTrapobsolete
1.3.6.1.4.1.2356.16.1.1.0.9NotificationfanFailureTrapobsolete
1.3.6.1.4.1.2356.16.1.1.0.10NotificationstpInstanceNewRootTrapcurrentTrap is sent when this machine is a new STP Root when there is more than one STP instance.
1.3.6.1.4.1.2356.16.1.1.0.11NotificationstpInstanceTopologyChangeTrapcurrentTrap is sent when there is a STP topology change when there is more than one STP instance.
1.3.6.1.4.1.2356.16.1.1.0.12NotificationpowerSupplyStatusChangeTrapobsolete
1.3.6.1.4.1.2356.16.1.1.0.13NotificationfailedUserLoginTrapcurrentTrap is sent when a user fails to authenticate via the CLI or Web interfaces.
1.3.6.1.4.1.2356.16.1.1.0.14NotificationuserLockoutTrapcurrentTrap is sent when a user account is locked due to consecutive failed login attempts via the CLI or Web interfaces beyond the allowed limit.
1.3.6.1.4.1.2356.16.1.1.0.15NotificationdaiIntfErrorDisabledTrapcurrentTrap is sent once an interface is error disabled by DAI when the incoming packet rate exceeded configured rate limit during a burst-interval.
1.3.6.1.4.1.2356.16.1.1.0.16NotificationstpInstanceLoopInconsistentStartTrapcurrentTrap is sent when this port in this STP instance enters loop inconsistent state upon failure to receive a BPDU.
1.3.6.1.4.1.2356.16.1.1.0.17NotificationstpInstanceLoopInconsistentEndTrapcurrentTrap is sent when this port in this STP instance exits loop inconsistent state upon reception of a BPDU.
1.3.6.1.4.1.2356.16.1.1.0.18NotificationdhcpSnoopingIntfErrorDisabledTrapcurrentTrap is sent once an interface is error disabled by DHCP Snooping when the incoming packet rate exceeded configured rate limit during a burst-interval.
1.3.6.1.4.1.2356.16.1.1.0.19NotificationnoStartupConfigTrapcurrentTrap is sent when startup-config file exists and SSH is enabled.
1.3.6.1.4.1.2356.16.1.1.0.20NotificationagentSwitchIpAddressConflictTrapcurrentIP address conflict trap signifies the reception of an ARP from another host in the LAN that has conflicting IP address.
1.3.6.1.4.1.2356.16.1.1.0.21NotificationagentSwitchCpuRisingThresholdTrapcurrentTrap is sent when the total CPU utilization exceeds CPU Rising utilization threshold over the configured Rising threshold interval.
1.3.6.1.4.1.2356.16.1.1.0.22NotificationagentSwitchCpuFallingThresholdTrapcurrentTrap is sent when the total CPU utilization falls below CPU Falling utilization threshold over the configured falling threshold interval.
1.3.6.1.4.1.2356.16.1.1.0.23NotificationagentSwitchCpuFreeMemBelowThresholdTrapcurrentTrap is sent when CPU Free Memory falls below the configured threshold.
1.3.6.1.4.1.2356.16.1.1.0.24NotificationagentSwitchCpuFreeMemAboveThresholdTrapcurrentTrap is sent when CPU Free Memory rises to 10% above the configured threshold.
1.3.6.1.4.1.2356.16.1.1.0.27NotificationagentSwitchMbufRisingThresholdTrapcurrentTrap is sent when the Mbuf utilization exceeds Rising utilization threshold.
1.3.6.1.4.1.2356.16.1.1.0.28NotificationagentSwitchMbufFallingThresholdTrapcurrentTrap is sent when the Mbuf utilization falls below Falling utilization threshold.
1.3.6.1.4.1.2356.16.1.1.0.29NotificationloginSessionStartStopTrapcurrentTrap is sent when a CLI session starts or ends.
1.3.6.1.4.1.2356.16.1.1.0.30NotificationagentSwitchDDisableAutoRecoveryTrapcurrentTrap is sent when interface (ifIndex) is auto recovered from agentPortDDisableReason reason.
1.3.6.1.4.1.2356.16.1.1.0.31NotificationagentSwitchStormControlTrapcurrentTrap is sent when storm control rate limit is reached.
1.3.6.1.4.1.2356.16.1.1.0.32NotificationloopProtectTrapcurrentTrap is sent on detection of loop on an interface.
1.3.6.1.4.1.2356.16.1.1.0.33NotificationagentdhcpSnoopViolationTrapcurrentTrap is sent when DHCP snoop violation occurs on an interface.
1.3.6.1.4.1.2356.16.1.1.0.34NotificationagentInventoryFanTrapcurrentTrap is sent when both fans are malfunctioned.
1.3.6.1.4.1.2356.16.1.1.1NodeagentInfoGroup
1.3.6.1.4.1.2356.16.1.1.1.1NodeagentInventoryGroup
1.3.6.1.4.1.2356.16.1.1.1.1.1ScalaragentInventorySysDescriptionread-onlycurrentThe switch's Inventory system description.
1.3.6.1.4.1.2356.16.1.1.1.1.2ScalaragentInventoryMachineTyperead-onlycurrentType of the Machine used in the Switch
1.3.6.1.4.1.2356.16.1.1.1.1.3ScalaragentInventoryMachineModelread-onlycurrentThe switch's Machine Model.
1.3.6.1.4.1.2356.16.1.1.1.1.4ScalaragentInventorySerialNumberread-onlycurrentSerial number of the switch.
1.3.6.1.4.1.2356.16.1.1.1.1.5ScalaragentInventoryFRUNumberread-onlycurrentFRU Number of the switch
1.3.6.1.4.1.2356.16.1.1.1.1.6ScalaragentInventoryMaintenanceLevelread-onlycurrentThe switch's Inventory Maintenance Level
1.3.6.1.4.1.2356.16.1.1.1.1.7ScalaragentInventoryPartNumberread-onlycurrentThe switch's Inventory Part Number
1.3.6.1.4.1.2356.16.1.1.1.1.8ScalaragentInventoryManufacturerread-onlycurrentName of the Manufacturer of this unit
1.3.6.1.4.1.2356.16.1.1.1.1.9ScalaragentInventoryBurnedInMacAddressread-onlycurrentBurned-In MAC Address
1.3.6.1.4.1.2356.16.1.1.1.1.10ScalaragentInventoryOperatingSystemread-onlycurrentOperating System running on this unit
1.3.6.1.4.1.2356.16.1.1.1.1.11ScalaragentInventoryNetworkProcessingDeviceread-onlycurrentNetwork Processing Device for this unit
1.3.6.1.4.1.2356.16.1.1.1.1.12ScalaragentInventoryAdditionalPackagesread-onlycurrentLists additional functional packages available on this unit.
1.3.6.1.4.1.2356.16.1.1.1.1.13ScalaragentInventorySoftwareVersionread-onlycurrentLists the version of software loaded on this unit.
1.3.6.1.4.1.2356.16.1.1.1.1.14ScalaragentInventoryHardwareVersionread-onlycurrentLists the version of hardware of this unit. This is a platform dependant string.
1.3.6.1.4.1.2356.16.1.1.1.1.15ScalaragentInventoryChipsetTemperatureread-onlycurrentDisplay the temperature of chipset.
1.3.6.1.4.1.2356.16.1.1.1.1.16ScalaragentInventoryRemoteThermal1read-onlycurrentDisplay temperature of remote thermal 1.
1.3.6.1.4.1.2356.16.1.1.1.1.17ScalaragentInventoryRemoteThermal2read-onlycurrentDisplay temperature of remote thermal 2.
1.3.6.1.4.1.2356.16.1.1.1.1.18ScalaragentInventoryLocalThermalread-onlycurrentDisplay temperature of local thermal.
1.3.6.1.4.1.2356.16.1.1.1.1.19ScalaragentInventoryVolt1Vread-onlycurrentDisplay Voltage of 1V.
1.3.6.1.4.1.2356.16.1.1.1.1.20ScalaragentInventoryVolt1V2read-onlycurrentDisplay Voltage of 1.2V.
1.3.6.1.4.1.2356.16.1.1.1.1.21ScalaragentInventoryVolt1V8read-onlycurrentDisplay Voltage of 1.8V.
1.3.6.1.4.1.2356.16.1.1.1.1.22ScalaragentInventoryVolt2V5read-onlycurrentDisplay Voltage of 2.5V.
1.3.6.1.4.1.2356.16.1.1.1.1.23ScalaragentInventoryVolt3V3read-onlycurrentDisplay Voltage of 3.3V.
1.3.6.1.4.1.2356.16.1.1.1.1.24ScalaragentInventoryFanStatusread-onlycurrentDisplay Fan status.
1.3.6.1.4.1.2356.16.1.1.1.1.25ScalaragentInventoryFan1RPMread-onlycurrentDisplay Fan1 RPM.
1.3.6.1.4.1.2356.16.1.1.1.1.26ScalaragentInventoryFan2RPMread-onlycurrentDisplay Fan2 RPM.
1.3.6.1.4.1.2356.16.1.1.1.2NodeagentTrapLogGroup
1.3.6.1.4.1.2356.16.1.1.1.2.1ScalaragentTrapLogTotalread-onlycurrentThe total number of traps sent since last reset.
1.3.6.1.4.1.2356.16.1.1.1.2.3ScalaragentTrapLogTotalSinceLastViewedread-onlycurrentThe number of traps sent since last viewed.
1.3.6.1.4.1.2356.16.1.1.1.2.4TableagentTrapLogTablenot-accessiblecurrentAgent Trap Log
1.3.6.1.4.1.2356.16.1.1.1.2.4.1RowagentTrapLogEntrynot-accessiblecurrentAgent trap log entry
1.3.6.1.4.1.2356.16.1.1.1.2.4.1.1ColumnagentTrapLogIndexread-onlycurrentUnique index of trap entry
1.3.6.1.4.1.2356.16.1.1.1.2.4.1.2ColumnagentTrapLogSystemTimeread-onlycurrentSystem uptime when trap was sent. This entry shows how long the system has been up when the trap occurred.
1.3.6.1.4.1.2356.16.1.1.1.2.4.1.3ColumnagentTrapLogTrapread-onlycurrentDescription of the trap sent.
1.3.6.1.4.1.2356.16.1.1.1.3TableagentSupportedMibTablenot-accessiblecurrentSupported MIB table
1.3.6.1.4.1.2356.16.1.1.1.3.1RowagentSupportedMibEntrynot-accessiblecurrentSupported MIB entry
1.3.6.1.4.1.2356.16.1.1.1.3.1.1ColumnagentSupportedMibIndexread-onlycurrentUnique index of the Supported MIB entry
1.3.6.1.4.1.2356.16.1.1.1.3.1.2ColumnagentSupportedMibNameread-onlycurrentThe name of the MIB (RFC or IEEE) that is supported.
1.3.6.1.4.1.2356.16.1.1.1.3.1.3ColumnagentSupportedMibDescriptionread-onlycurrentDescription of the MIB (RFC or IEEE) that is supported.
1.3.6.1.4.1.2356.16.1.1.1.4NodeagentSwitchCpuProcessGroup
1.3.6.1.4.1.2356.16.1.1.1.4.1ScalaragentSwitchCpuProcessMemFreeread-onlycurrentThe total memory free for utilization in KBytes.
1.3.6.1.4.1.2356.16.1.1.1.4.2ScalaragentSwitchCpuProcessMemAvailableread-onlycurrentThe total memory available in KBytes.
1.3.6.1.4.1.2356.16.1.1.1.4.3ScalaragentSwitchCpuProcessRisingThresholdread-writecurrentThe CPU Rising utilization threshold in percentage. A zero percent threshold indicates CPU Utilization Notification feature is disabled. A notification is trig…
1.3.6.1.4.1.2356.16.1.1.1.4.4ScalaragentSwitchCpuProcessRisingThresholdIntervalread-writecurrentThe CPU Rising threshold interval in seconds. The time interval is configured in multiples of 5 seconds. A zero Rising interval indicates CPU Utilization Notif…
1.3.6.1.4.1.2356.16.1.1.1.4.5ScalaragentSwitchCpuProcessFallingThresholdread-writecurrentThe CPU Falling utilization threshold in percentage. Configuration of this object value is optional. Value '0' is not allowed for configuration, if the Rising …
1.3.6.1.4.1.2356.16.1.1.1.4.6ScalaragentSwitchCpuProcessFallingThresholdIntervalread-writecurrentThe CPU Falling threshold interval in seconds. Configuration of this object value is optional. Value '0' is not allowed for configuration, if the Rising interv…
1.3.6.1.4.1.2356.16.1.1.1.4.7ScalaragentSwitchCpuProcessFreeMemoryThresholdread-writecurrentThe CPU Free Memory threshold in kilobytes. A zero threshold value indicates the CPU Free Memory Notification feature is disabled. Notifications are triggered …
1.3.6.1.4.1.2356.16.1.1.1.4.8TableagentSwitchCpuProcessTablenot-accessiblecurrentA table of Task and cpu utilization.
1.3.6.1.4.1.2356.16.1.1.1.4.8.1RowagentSwitchCpuProcessEntrynot-accessiblecurrentRepresents entry for a Task Table.
1.3.6.1.4.1.2356.16.1.1.1.4.8.1.1ColumnagentSwitchCpuProcessIndexnot-accessiblecurrentUnique index of process table
1.3.6.1.4.1.2356.16.1.1.1.4.8.1.2ColumnagentSwitchCpuProcessNameread-onlycurrentName of the process
1.3.6.1.4.1.2356.16.1.1.1.4.8.1.3ColumnagentSwitchCpuProcessPercentageUtilizationread-onlycurrentCPU utilization per task in Percentage over a period of 5, 60, 300 seconds, and the Rising threshold period also in seconds, if configured.
1.3.6.1.4.1.2356.16.1.1.1.4.8.1.4ColumnagentSwitchCpuProcessIdread-onlycurrentProcess ID
1.3.6.1.4.1.2356.16.1.1.1.4.9ScalaragentSwitchCpuProcessTotalUtilizationread-onlycurrentTotal CPU utilization expressed in percentage over a period of 5, 60, 300 seconds, and the Rising threshold period also in seconds, if configured.
1.3.6.1.4.1.2356.16.1.1.1.4.10ScalaragentSwitchCpuProcessMemFreePercentageread-onlycurrentThe total percent of memory free for utilization.
1.3.6.1.4.1.2356.16.1.1.1.4.11ScalaragentSwitchCpuProcessTotalUtilizationPercentage5secread-onlycurrentTotal CPU utilization over a period of 5 seconds.
1.3.6.1.4.1.2356.16.1.1.1.4.12ScalaragentSwitchCpuProcessTotalUtilizationPercentage60secread-onlycurrentTotal CPU utilization over a period of 60 seconds.
1.3.6.1.4.1.2356.16.1.1.1.4.13ScalaragentSwitchCpuProcessTotalUtilizationPercentage300secread-onlycurrentTotal CPU utilization over a period of 300 seconds.
1.3.6.1.4.1.2356.16.1.1.1.6NodeagentSwitchCpuCosQDropGroup
1.3.6.1.4.1.2356.16.1.1.1.6.1TableagentSwitchCpuCosQDropTablenot-accessiblecurrentTable lists the number of packets dropped at each CoS queue for the CPU.
1.3.6.1.4.1.2356.16.1.1.1.6.1.1RowagentSwitchCpuCosQDropEntrynot-accessiblecurrentPacket drop statistics for a CPU CoS queue.
1.3.6.1.4.1.2356.16.1.1.1.6.1.1.1ColumnagentSwitchCpuCosQIndexnot-accessiblecurrentUnique index of a CPU CoS queue.
1.3.6.1.4.1.2356.16.1.1.1.6.1.1.2ColumnagentSwitchCpuCosQDropsread-onlycurrentNumber of packets dropped at this CPU CoS queue because the queue was full.
1.3.6.1.4.1.2356.16.1.1.1.7NodeagentSwitchMbufGroup
1.3.6.1.4.1.2356.16.1.1.1.7.1ScalaragentSwitchMbufsFreeread-onlycurrentNumber of message buffers currently available.
1.3.6.1.4.1.2356.16.1.1.1.7.2TableagentSwitchMbufTablenot-accessiblecurrentTable lists information about message buffer allocation for packets arriving at the CPU.
1.3.6.1.4.1.2356.16.1.1.1.7.2.1RowagentSwitchMbufEntrynot-accessiblecurrentInformation on a specific class of message buffers.
1.3.6.1.4.1.2356.16.1.1.1.7.2.1.1ColumnagentSwitchMbufPrionot-accessiblecurrentMessage buffer priority.
1.3.6.1.4.1.2356.16.1.1.1.7.2.1.2ColumnagentSwitchMbufClassNameread-onlycurrentName of this class of message buffer.
1.3.6.1.4.1.2356.16.1.1.1.7.2.1.3ColumnagentSwitchMbufAllocAttemptsread-onlycurrentNumber of times the system tried to allocate a message buffer allocation of this class.
1.3.6.1.4.1.2356.16.1.1.1.7.2.1.4ColumnagentSwitchMbufAllocFailsread-onlycurrentNumber of message buffer allocation failures for this class of message buffer.
1.3.6.1.4.1.2356.16.1.1.1.7.3ScalaragentSwitchMbufsTotalread-onlycurrentTotal number of message buffers in the system.
1.3.6.1.4.1.2356.16.1.1.1.7.4ScalaragentSwitchMbufsUsedread-onlycurrentNumber of message buffers currently in use.
1.3.6.1.4.1.2356.16.1.1.1.8NodeagentPortStatsRateGroup
1.3.6.1.4.1.2356.16.1.1.1.8.1TableagentPortStatsRateTablenot-accessiblecurrent
1.3.6.1.4.1.2356.16.1.1.1.8.1.1RowagentPortStatsRateEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.16.1.1.1.8.1.1.1ColumnagentPortStatsRateBitsPerSecondRxread-onlycurrentThe number of bits per second received. This value is an exponentially weighted average and is affected by the configured agentPortLoadStatsInterval.
1.3.6.1.4.1.2356.16.1.1.1.8.1.1.2ColumnagentPortStatsRateBitsPerSecondTxread-onlycurrentThe number of bits per second transmitted. This value is an exponentially weighted average and is affected by the configured agentPortLoadStatsInterval.
1.3.6.1.4.1.2356.16.1.1.1.8.1.1.3ColumnagentPortStatsRatePacketsPerSecondRxread-onlycurrentThe number of packets per second received. This value is an exponentially weighted average and is affected by the configured agentPortLoadStatsInterval.
1.3.6.1.4.1.2356.16.1.1.1.8.1.1.4ColumnagentPortStatsRatePacketsPerSecondTxread-onlycurrentThe number of packets per second transmitted. This value is an exponentially weighted average and is affected by the configured agentPortLoadStatsInterval.
1.3.6.1.4.1.2356.16.1.1.1.8.1.1.5ColumnagentPortStatsRateOverflowBitsPerSecondRxread-onlycurrentThe counter in which stored the number of times the associated agentPortStatsRateBitsPerSecondRx counter has overflowed.
1.3.6.1.4.1.2356.16.1.1.1.8.1.1.6ColumnagentPortStatsRateOverflowBitsPerSecondTxread-onlycurrentThe counter in which stored the number of times the associated agentPortStatsRateBitsPerSecondTx counter has overflowed.
1.3.6.1.4.1.2356.16.1.1.1.8.1.1.7ColumnagentPortStatsRateOverflowPacketsPerSecondRxread-onlycurrentThe counter in which stored the number of times the associated agentPortStatsRatePacketsPerSecondRx counter has overflowed.
1.3.6.1.4.1.2356.16.1.1.1.8.1.1.8ColumnagentPortStatsRateOverflowPacketsPerSecondTxread-onlycurrentThe counter in which stored the number of times the associated agentPortStatsRatePacketsPerSecondTx counter has overflowed.
1.3.6.1.4.1.2356.16.1.1.1.8.1.1.9ColumnagentPortStatsRateHCBitsPerSecondRxread-onlycurrentThe number of bits per second received. This value is an exponentially weighted average and is affected by the configured agentPortLoadStatsInterval.
1.3.6.1.4.1.2356.16.1.1.1.8.1.1.10ColumnagentPortStatsRateHCBitsPerSecondTxread-onlycurrentThe number of bits per second transmitted. This value is an exponentially weighted average and is affected by the configured agentPortLoadStatsInterval.
1.3.6.1.4.1.2356.16.1.1.1.8.1.1.11ColumnagentPortStatsRateHCPacketsPerSecondRxread-onlycurrentThe number of packets per second received. This value is an exponentially weighted average and is affected by the configured agentPortLoadStatsInterval.
1.3.6.1.4.1.2356.16.1.1.1.8.1.1.12ColumnagentPortStatsRateHCPacketsPerSecondTxread-onlycurrentThe number of packets per second transmitted. This value is an exponentially weighted average and is affected by the configured agentPortLoadStatsInterval.
1.3.6.1.4.1.2356.16.1.1.1.8.1.1.13ColumnagentPortStatsRateLinkUtilizationRxread-onlycurrentReceive utilization of the link rounded to the nearest whole percentage.
1.3.6.1.4.1.2356.16.1.1.1.8.1.1.14ColumnagentPortStatsRateLinkUtilizationTxread-onlycurrentTransmit utilization of the link rounded to the nearest whole percentage.
1.3.6.1.4.1.2356.16.1.1.1.10NodeagentCpuTrafficGroup
1.3.6.1.4.1.2356.16.1.1.1.10.1ScalaragentCpuTrafficModeread-writecurrentEnable/Disable CPU Traffic Filter mode.
1.3.6.1.4.1.2356.16.1.1.1.10.2ScalaragentCpuTrafficTraceread-writecurrentEnable/Disable CPU Traffic Filter trace mode. Disabling this OID also disables agentCpuTrafficPacketDump option.
1.3.6.1.4.1.2356.16.1.1.1.10.3ScalaragentCpuTrafficPacketDumpread-writecurrentEnable/Disable CPU Traffic packet dump option. This option can be enabled only along with enabling agentCpuTrafficTrace. It is automatically disabled along wit…
1.3.6.1.4.1.2356.16.1.1.1.10.4TableagentCpuTrafficTablenot-accessiblecurrentA table that contains CPU Traffic Filter configuration. An entry appears in this table for each supported direction (RX or TX).
1.3.6.1.4.1.2356.16.1.1.1.10.4.1RowagentCpuTrafficEntrynot-accessiblecurrentCPU Traffic Filter configuration including direction, filters and custom filter's parameters.
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.1ColumnagentCpuTrafficDirectionread-onlycurrentUnique CPU Traffic Filter direction Transmit or Receive (TX or RX).
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.2ColumnagentCpuTrafficFilterMaskread-writecurrentBitMask indicating which filter to configure for CPU Traffic Filter. Each filter corresponds to unique bit in the bitmask. Each byte stores 8 filter types. Fir…
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.3ColumnagentCpuTrafficSourceIPTyperead-writecurrentSource IP address type for CPU Traffic source IP filter. Must be set together with agentCpuTrafficSourceIP object.
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.4ColumnagentCpuTrafficSourceIPread-writecurrentSource IP address for CPU Traffic source IP filter. Must be set together with agentCpuTrafficSourceIPType object.
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.5ColumnagentCpuTrafficSourceIPMaskTyperead-writecurrentSource IP address Mask type for CPU Traffic source IP filter. Must be set together with agentCpuTrafficSourceIPMask object.
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.6ColumnagentCpuTrafficSourceIPMaskread-writecurrentSource IP address Mask for CPU Traffic source IP filter. Must be set together with agentCpuTrafficSourceIPMaskType object.
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.7ColumnagentCpuTrafficDestinationIPTyperead-writecurrentDestination IP address type for CPU Traffic destination IP filter. Must be set together with agentCpuTrafficDestinationIP object.
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.8ColumnagentCpuTrafficDestinationIPread-writecurrentDestination IP address for CPU Traffic destination IP filter. Must be set together with agentCpuTrafficDestinationIPType object.
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.9ColumnagentCpuTrafficDestinationIPMaskTyperead-writecurrentDestination IP address Mask type for CPU Traffic destination IP filter. Must be set together with agentCpuTrafficDestinationIPMask object.
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.10ColumnagentCpuTrafficDestinationIPMaskread-writecurrentDestination IP address Mask for CPU Traffic destination IP filter. Must be set together with agentCpuTrafficDestinationIPMaskType object.
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.11ColumnagentCpuTrafficSourceMACread-writecurrentSource MAC address for CPU traffic source MAC filter. MAC address format must include 6 bytes separated using colon. For example: FF:FF:FF:FF:FF:FF.
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.12ColumnagentCpuTrafficSourceMACMaskread-writecurrentSource MAC address Mask for CPU traffic source MAC filter. MAC address format must include 6 bytes separated using colon. For example: FF:FF:FF:FF:FF:FF.
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.13ColumnagentCpuTrafficDestinationMACread-writecurrentDestination MAC address for CPU traffic destination MAC filter. MAC address format must include 6 bytes separated using colon. For example: FF:FF:FF:FF:FF:FF.
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.14ColumnagentCpuTrafficDestinationMACMaskread-writecurrentDestination MAC address Mask for CPU traffic destination MAC filter. MAC address format must include 6 bytes separated using colon. For example: FF:FF:FF:FF:FF…
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.15ColumnagentCpuTrafficCustomFilterread-writecurrentCustom filter parameters for CPU traffic custom filter. Filter is used to specify a set of triplets in the following format: [offset value mask]. Each option i…
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.16ColumnagentCpuTrafficSourceTcpPortread-writecurrentSource TCP port value for CPU traffic filter source filter.
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.17ColumnagentCpuTrafficSourceTcpPortMaskread-writecurrentMask value for source TCP port filter option.
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.18ColumnagentCpuTrafficDestinationTcpPortread-writecurrentDestination TCP port value for CPU traffic filter destination filter.
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.19ColumnagentCpuTrafficDestinationTcpPortMaskread-writecurrentMask value for destination TCP port filter option.
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.20ColumnagentCpuTrafficSourceUdpPortread-writecurrentSource UDP port value for CPU traffic filter source filter.
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.21ColumnagentCpuTrafficSourceUdpPortMaskread-writecurrentMask value for source UDP port filter option.
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.22ColumnagentCpuTrafficDestinationUdpPortread-writecurrentDestination UDP port value for CPU traffic filter destination filter.
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.23ColumnagentCpuTrafficDestinationUdpPortMaskread-writecurrentMask value for destination UDP port filter option.
1.3.6.1.4.1.2356.16.1.1.1.10.4.1.24ColumnagentCpuTrafficInterfaceread-writecurrentBitMask indicating which interface(s) to configure for CPU Traffic Filter. First interface is located in the most significant bit (MSB) of the first byte (byte…
1.3.6.1.4.1.2356.16.1.1.1.40TableagentPowerInformationUnitTablenot-accessiblecurrentA table of Power Information.
1.3.6.1.4.1.2356.16.1.1.1.40.1RowagentPowerInformationUnitEntrynot-accessiblecurrentAn entry of Power Information table.
1.3.6.1.4.1.2356.16.1.1.1.40.1.1ColumnagentPowerInformationUnitNumbernot-accessiblecurrentThe unit number associated with this unit.
1.3.6.1.4.1.2356.16.1.1.1.40.1.2ColumnagentPowerInformationUnitPSUStatusAread-onlycurrentThe status of power supply unit A.
1.3.6.1.4.1.2356.16.1.1.1.40.1.3ColumnagentPowerInformationUnitPSUStatusBread-onlycurrentThe status of power supply unit B.
1.3.6.1.4.1.2356.16.1.1.1.40.1.4ColumnagentPowerInformationUnitFANSpeedAread-onlycurrentThe fan speed of power supply unit A.
1.3.6.1.4.1.2356.16.1.1.1.40.1.5ColumnagentPowerInformationUnitFANSpeedBread-onlycurrentThe fan speed of power supply unit B.
1.3.6.1.4.1.2356.16.1.1.1.40.1.6ColumnagentPowerInformationUnitTemperatureAread-onlycurrentThe temperature of power supply unit A.
1.3.6.1.4.1.2356.16.1.1.1.40.1.7ColumnagentPowerInformationUnitTemperatureBread-onlycurrentThe temperature of power supply unit B.
1.3.6.1.4.1.2356.16.1.1.1.40.1.8ColumnagentPowerInformationUnitOperatingModeread-writecurrentThe operating mode of power supply unit. 0:Boost 1:Redundant
1.3.6.1.4.1.2356.16.1.1.2NodeagentConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.1NodeagentCLIConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.1.1TableagentLoginSessionTablenot-accessiblecurrentA table of the switch's login session
1.3.6.1.4.1.2356.16.1.1.2.1.1.1RowagentLoginSessionEntrynot-accessiblecurrentLogin Session Entry
1.3.6.1.4.1.2356.16.1.1.2.1.1.1.1ColumnagentLoginSessionIndexread-onlycurrentAgent Login Session Index of the switch
1.3.6.1.4.1.2356.16.1.1.2.1.1.1.2ColumnagentLoginSessionUserNameread-onlycurrentAgent Login Session UserName of the switch
1.3.6.1.4.1.2356.16.1.1.2.1.1.1.3ColumnagentLoginSessionIPAddressread-onlyobsoleteAgent Login Session IP Address of the switch
1.3.6.1.4.1.2356.16.1.1.2.1.1.1.4ColumnagentLoginSessionConnectionTyperead-onlycurrentAgent Login Session Connection Type of the switch
1.3.6.1.4.1.2356.16.1.1.2.1.1.1.5ColumnagentLoginSessionIdleTimeread-onlycurrentAgent Login Session Idle Time of the switch
1.3.6.1.4.1.2356.16.1.1.2.1.1.1.6ColumnagentLoginSessionSessionTimeread-onlycurrentAgent Login Session Time of the switch
1.3.6.1.4.1.2356.16.1.1.2.1.1.1.7ColumnagentLoginSessionStatusread-writecurrentStatus of the user. active(1) - This connection is active. destroy(6) - Set to this value to disconnect this user.
1.3.6.1.4.1.2356.16.1.1.2.1.1.1.8ColumnagentLoginSessionInetAddressTyperead-onlycurrentType of address agentLoginSessionInetAddress is returning. Can be either unknown(0), ipv4(1), or ipv6 (2). Will return unknown(0) in the case of a serial login.
1.3.6.1.4.1.2356.16.1.1.2.1.1.1.9ColumnagentLoginSessionInetAddressread-onlycurrentInet Address of the connecting the user is logging in with. Will return a zero-length string in the case of a serial login.
1.3.6.1.4.1.2356.16.1.1.2.1.2NodeagentTelnetConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.1.2.1ScalaragentTelnetLoginTimeoutread-writecurrentTelnet login timeout (minutes) Config telnet timeout will set the telnet session timeout value. A session is active as long as the session has not remained idl…
1.3.6.1.4.1.2356.16.1.1.2.1.2.2ScalaragentTelnetMaxSessionsread-writecurrentMaximum number of Telnet Sessions Config telnet maxsessions is an integer value that specifies the maximum number of telnet sessions that can be established. I…
1.3.6.1.4.1.2356.16.1.1.2.1.2.3ScalaragentTelnetAllowNewModeread-writecurrentAllow new telnet sessions (enable or disable) Config telnet disable means that no new Telnet sessions are to be established. Any already established session re…
1.3.6.1.4.1.2356.16.1.1.2.1.2.4ScalaragentTelnetMgmtPortNumread-writecurrentGet/Set the TCP port number that the telnet server listens to for incoming requests. The port number is an integer value from 1 to 65535. Before setting this o…
1.3.6.1.4.1.2356.16.1.1.2.1.3NodeagentUserConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.1.3.1ScalaragentUserConfigCreateread-writecurrentCreate a new user. When set with a non-empty string, a new user with that name will be created. This object will only return an empty string. This string is li…
1.3.6.1.4.1.2356.16.1.1.2.1.3.2TableagentUserConfigTablenot-accessiblecurrentUser Config Table
1.3.6.1.4.1.2356.16.1.1.2.1.3.2.1RowagentUserConfigEntrynot-accessiblecurrentUser Config Entry
1.3.6.1.4.1.2356.16.1.1.2.1.3.2.1.1ColumnagentUserIndexnot-accessiblecurrentAgent User Config Index
1.3.6.1.4.1.2356.16.1.1.2.1.3.2.1.2ColumnagentUserNameread-writecurrentAgent User Name. This string is limited to alpha-numeric strings (including the '-' and '_' characters).
1.3.6.1.4.1.2356.16.1.1.2.1.3.2.1.3ColumnagentUserPasswordread-writecurrentAgent User Password This object will return an empty string even if a password is set.
1.3.6.1.4.1.2356.16.1.1.2.1.3.2.1.4ColumnagentUserAccessModeread-writeobsoleteAgent User Access Mode. This object is deprecated in favor of agentUserAccessLevel.
1.3.6.1.4.1.2356.16.1.1.2.1.3.2.1.5ColumnagentUserStatusread-writecurrentAgent User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account.
1.3.6.1.4.1.2356.16.1.1.2.1.3.2.1.9ColumnagentUserLockoutStatusread-onlycurrentDisplays whether the user account is locked due to excessive failed login attempts.
1.3.6.1.4.1.2356.16.1.1.2.1.3.2.1.10ColumnagentUserPasswordExpireTimeread-onlycurrentDate and time when the user's password expires (past or present). Only valid when password aging is enabled.
1.3.6.1.4.1.2356.16.1.1.2.1.3.2.1.11ColumnagentUserAccessLevelread-writecurrentAgent User Access Level. Supported values are 0, 1 and 15.
1.3.6.1.4.1.2356.16.1.1.2.1.3.2.1.12ColumnagentUserGroupsread-writecurrentThis variable is used for selecting/unselecting configured user groups. First user group has index 1, and bitmask value 8000. Last user group has index 10, and…
1.3.6.1.4.1.2356.16.1.1.2.1.3.2.1.13ColumnagentUserSshPublicKeyread-writecurrentThe user ssh Public key file is used for ssh secure login for user without password.
1.3.6.1.4.1.2356.16.1.1.2.1.3.2.1.14ColumnagentUserPasswordEncryptTyperead-writecurrentUser password encryption algorithm Type. md5(5) - MD5 aes(6) - AES - 128
1.3.6.1.4.1.2356.16.1.1.2.1.3.2.1.15ColumnagentUserPasswordEncryptedread-writecurrentSpecifies whether the password is encrypted or not.
1.3.6.1.4.1.2356.16.1.1.2.1.3.150ScalaragentUseradminPasswordread-writecurrentAdmin password This object will return an empty string even if a password is set.
1.3.6.1.4.1.2356.16.1.1.2.1.3.151ScalaragentUseradminPasswordEncryptedread-writecurrentEncrypted admin password
1.3.6.1.4.1.2356.16.1.1.2.1.5NodeagentSerialGroup
1.3.6.1.4.1.2356.16.1.1.2.1.5.1ScalaragentSerialTimeoutread-writecurrentagentSerialTimeout specifies the maximum connect time(in minutes) without console activity. A value of 0 indicates that a console can be connected indefinitely…
1.3.6.1.4.1.2356.16.1.1.2.1.5.2ScalaragentSerialBaudrateread-writecurrentagentSerialBaudrate specifies the current baud rate at which the serial port will try to connect. The available values are 1200, 2400, 4800, 9600, 19200, 38400…
1.3.6.1.4.1.2356.16.1.1.2.1.5.3ScalaragentSerialCharacterSizeread-onlycurrentagentSerialCharacterSize specifies the number of bits in a character. The number of bits is always 8.
1.3.6.1.4.1.2356.16.1.1.2.1.5.4ScalaragentSerialHWFlowControlModeread-onlycurrentagentSerialHardwareFlowControl specifies whether hardware flow-control is enabled or disabled. Hardware Flow Control is always disabled.
1.3.6.1.4.1.2356.16.1.1.2.1.5.5ScalaragentSerialStopBitsread-onlycurrentagentSerialStopBits specifies the number of Stop bits per character. The number of Stop bits is always 1.
1.3.6.1.4.1.2356.16.1.1.2.1.5.6ScalaragentSerialParityTyperead-onlycurrentagentSerialParityType specifies the Parity Method used on the Serial Port. The Parity Method is always None.
1.3.6.1.4.1.2356.16.1.1.2.1.6NodeagentPasswordManagementConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.1.6.1ScalaragentPasswordManagementMinLengthread-writecurrentMinimum length for user passwords All new local user passwords must be at least this many characters in length.
1.3.6.1.4.1.2356.16.1.1.2.1.6.2ScalaragentPasswordManagementHistoryread-writecurrentThe number of previous passwords to store for prevention of password reuse. This ensures that each user does not reuse passwords often. A value of 0 indicates …
1.3.6.1.4.1.2356.16.1.1.2.1.6.3ScalaragentPasswordManagementAgingread-writecurrentThe maximum time that user passwords are valid, in days, from the time the password is set. Once a password expires, the user will be required to enter a new p…
1.3.6.1.4.1.2356.16.1.1.2.1.6.4ScalaragentPasswordManagementLockAttemptsread-writecurrentThe number of allowable failed local authentication attempts before the user's account is locked. A value of 0 indicates that user accounts will never be locke…
1.3.6.1.4.1.2356.16.1.1.2.1.6.5ScalaragentPasswordManagementPasswordStrengthCheckread-writecurrentConfigures Password Strength Check feature.
1.3.6.1.4.1.2356.16.1.1.2.1.6.6ScalaragentPasswordManagementStrengthMinUpperCaseread-writecurrentThe number of minimum allowable uppercase letters in a password. Minimum of 0 means no restriction on that set of characters.
1.3.6.1.4.1.2356.16.1.1.2.1.6.7ScalaragentPasswordManagementStrengthMinLowerCaseread-writecurrentThe number of minimum allowable lowercase letters in a password. Minimum of 0 means no restriction on that set of characters.
1.3.6.1.4.1.2356.16.1.1.2.1.6.8ScalaragentPasswordManagementStrengthMinNumericNumbersread-writecurrentThe number of minimum allowable numeric numbers in a password. Minimum of 0 means no restriction on that set of characters.
1.3.6.1.4.1.2356.16.1.1.2.1.6.9ScalaragentPasswordManagementStrengthMinSpecialCharactersread-writecurrentThe number of minimum allowable special characters in a password. Minimum of 0 means no restriction on that set of characters.
1.3.6.1.4.1.2356.16.1.1.2.1.6.10ScalaragentPasswordManagementStrengthMaxConsecutiveCharactersread-writecurrentThe number of maximum consecutive characters can be present in a password. Maximum of 0 means disabling the restriction.
1.3.6.1.4.1.2356.16.1.1.2.1.6.11ScalaragentPasswordManagementStrengthMaxRepeatedCharactersread-writecurrentThe number of maximum repeated characters can be present in a password. Maximum of 0 means disabling the restriction.
1.3.6.1.4.1.2356.16.1.1.2.1.6.12ScalaragentPasswordManagementStrengthMinCharacterClassesread-writecurrentThe number of minimum allowable character classes in a password. Minimum of 0 means no restriction on that set of characters.
1.3.6.1.4.1.2356.16.1.1.2.1.6.14ScalaragentPasswordMgmtLastPasswordSetResultread-onlycurrentRetrieves the last password set Result.
1.3.6.1.4.1.2356.16.1.1.2.1.6.15TableagentPasswordManagementStrengthExcludeKeywordTablenot-accessiblecurrentRepresents Password strength restricted keywords from the configurable password.
1.3.6.1.4.1.2356.16.1.1.2.1.6.15.1RowagentPasswordManagementStrengthExcludeKeywordEntrynot-accessiblecurrentRepresents Password strength restricted keywords from the configurable password.
1.3.6.1.4.1.2356.16.1.1.2.1.6.15.1.1ColumnagentPasswordMgmtStrengthExcludeKeywordread-onlycurrentSpecifies the given keyword string restricted from the configurable password.
1.3.6.1.4.1.2356.16.1.1.2.1.6.15.1.2ColumnagentPasswordMgmtStrengthExcludeKeywordStatusread-createcurrentCreate the Exclude Keyword Index and configure (Create or Destroy) the keyword to it.
1.3.6.1.4.1.2356.16.1.1.2.1.7NodeagentIASUserConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.1.7.1ScalaragentIASUserConfigCreateread-writecurrentCreate a new user. When set with a non-empty string, a new user with that name will be created. This object will only return an empty string. This string is li…
1.3.6.1.4.1.2356.16.1.1.2.1.7.2TableagentIASUserConfigTablenot-accessiblecurrentA table for dot1x Client details and associated functionality.
1.3.6.1.4.1.2356.16.1.1.2.1.7.2.1RowagentIASUserConfigEntrynot-accessiblecurrentRepresents entry for port config table.
1.3.6.1.4.1.2356.16.1.1.2.1.7.2.1.1ColumnagentIASUserIndexnot-accessiblecurrentIAS user config index.
1.3.6.1.4.1.2356.16.1.1.2.1.7.2.1.2ColumnagentIASUserNameread-writecurrentIAS user name. This string is limited to alpha-numeric strings (including '-' and '_' characters).
1.3.6.1.4.1.2356.16.1.1.2.1.7.2.1.3ColumnagentIASUserPasswordread-writecurrentIAS user password.
1.3.6.1.4.1.2356.16.1.1.2.1.7.2.1.4ColumnagentIASUserStatusread-writecurrentIAS User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account.
1.3.6.1.4.1.2356.16.1.1.2.1.8NodeagentCLIBannerMsgConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.1.8.1ScalaragentCLIBannerMessageread-writecurrentBanner message string. To enter the banner message in multiple lines, separate each line by '\r\n'. The maximum printable characters is limited to 2000 charact…
1.3.6.1.4.1.2356.16.1.1.2.1.9NodeagentUserMgrTaskGroupConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.1.9.1TableagentUserMgrTaskGroupTablenot-accessiblecurrentTask group configuration table.
1.3.6.1.4.1.2356.16.1.1.2.1.9.1.1RowagentUserMgrTaskGroupEntrynot-accessiblecurrentTask group configuration entry.
1.3.6.1.4.1.2356.16.1.1.2.1.9.1.1.1ColumnagentUserMgrTaskGroupIndexnot-accessiblecurrentIndex of selected task group.
1.3.6.1.4.1.2356.16.1.1.2.1.9.1.1.2ColumnagentUserMgrTaskGroupNameread-writecurrentName of selected task group.
1.3.6.1.4.1.2356.16.1.1.2.1.9.1.1.3ColumnagentUserMgrTaskGroupDescriptionread-writecurrentTextual description of selected task group (optional).
1.3.6.1.4.1.2356.16.1.1.2.1.9.1.1.4ColumnagentUserMgrTaskGroupInheritread-writecurrentBit mask variable for configuring inherited task groups. First task group has index 1 and bitmask value is 8000. Last task group has index 9 and bitmask value …
1.3.6.1.4.1.2356.16.1.1.2.1.9.1.1.5ColumnagentUserMgrTaskGroupRowStatusread-writecurrentRow status value of user group table.
1.3.6.1.4.1.2356.16.1.1.2.1.9.2NodeagentUserMgrTaskGroupPermissionsConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.1.9.2.1TableagentUserMgrTaskGroupPermissionsTablenot-accessiblecurrentTask permission configuration table.
1.3.6.1.4.1.2356.16.1.1.2.1.9.2.1.1RowagentUserMgrTaskGroupPermissionsEntrynot-accessiblecurrentTask permission configuration entry.
1.3.6.1.4.1.2356.16.1.1.2.1.9.2.1.1.1ColumnagentUserMgrTaskGroupTaskIndexnot-accessiblecurrentIndex of selected task.
1.3.6.1.4.1.2356.16.1.1.2.1.9.2.1.1.2ColumnagentUserMgrTaskGroupTaskPermissionread-writecurrentValue of permission for selected task. Tasks may have multiple permissions.
1.3.6.1.4.1.2356.16.1.1.2.1.9.2.1.1.3ColumnagentUserMgrTaskGroupTaskOperationalPermissionread-onlycurrentValue of operational permissions for selected task. Consists of configured permissions for selected task and inherited permissions.
1.3.6.1.4.1.2356.16.1.1.2.1.10NodeagentUserMgrUserGroupConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.1.10.1TableagentUserMgrUserGroupTablenot-accessiblecurrentUser group configuration table.
1.3.6.1.4.1.2356.16.1.1.2.1.10.1.1RowagentUserMgrUserGroupEntrynot-accessiblecurrentUser group configuration entry.
1.3.6.1.4.1.2356.16.1.1.2.1.10.1.1.1ColumnagentUserMgrUserGroupIndexnot-accessiblecurrentIndex of selected user group.
1.3.6.1.4.1.2356.16.1.1.2.1.10.1.1.2ColumnagentUserMgrUserGroupNameread-writecurrentName of selected user group.
1.3.6.1.4.1.2356.16.1.1.2.1.10.1.1.3ColumnagentUserMgrUserGroupDescriptionread-writecurrentTextual description of selected user group (optional).
1.3.6.1.4.1.2356.16.1.1.2.1.10.1.1.4ColumnagentUserMgrUserGroupInheritread-writecurrentBit mask variable for configuring inherited user groups. First user group has index 1 and bitmask value is 8000. Last user group has index 9 and bitmask value …
1.3.6.1.4.1.2356.16.1.1.2.1.10.1.1.5ColumnagentUserMgrUserGroupContainedTaskGroupsread-writecurrentBit mask variable for configuring contained task groups. First task group has index 1 and bitmask value is 8000. Last task group has index 10 and bitmask value…
1.3.6.1.4.1.2356.16.1.1.2.1.10.1.1.6ColumnagentUserMgrUserGroupRowStatusread-writecurrentRow status value of user group table.
1.3.6.1.4.1.2356.16.1.1.2.2NodeagentLagConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.2.1ScalaragentLagConfigCreateread-onlycurrentAgent LAG Create. When this object is set with a non-empty string, a new LAG will be created if possible, with the entered string as its name. Get operation on…
1.3.6.1.4.1.2356.16.1.1.2.2.2TableagentLagSummaryConfigTablenot-accessiblecurrentA summary table of the switch's LAG config entries
1.3.6.1.4.1.2356.16.1.1.2.2.2.1RowagentLagSummaryConfigEntrynot-accessiblecurrentSwitch's LAG config entry
1.3.6.1.4.1.2356.16.1.1.2.2.2.1.1ColumnagentLagSummaryLagIndexread-onlycurrentAgent LAG IfIndex. This value corresponds with the LAG interface in the ifTable.
1.3.6.1.4.1.2356.16.1.1.2.2.2.1.2ColumnagentLagSummaryNameread-writecurrentAgent LAG Name. The associated name of the LAG used during creation. Duplicate names are not allowed.
1.3.6.1.4.1.2356.16.1.1.2.2.2.1.3ColumnagentLagSummaryFlushTimerread-writeobsoleteAgent LAG FlushTimer.
1.3.6.1.4.1.2356.16.1.1.2.2.2.1.4ColumnagentLagSummaryLinkTrapread-writecurrentAgent LAG LinkTrap. Configures sending Link Up/Down traps when the LAG interface goes Up or Down.
1.3.6.1.4.1.2356.16.1.1.2.2.2.1.5ColumnagentLagSummaryAdminModeread-writecurrentAgent LAG AdminMode. Administratively enables or disables this LAG interface.
1.3.6.1.4.1.2356.16.1.1.2.2.2.1.6ColumnagentLagSummaryStpModeread-writecurrentAgent LAG StpMode Administratively enables or disables STP on this interface.
1.3.6.1.4.1.2356.16.1.1.2.2.2.1.7ColumnagentLagSummaryAddPortread-writecurrentAgent LAG AddPort. Set to a non 0 value to add a port to the LAG. Values correspond to ifIndex values in the ifTable. Note: agentPortType for the port to be ad…
1.3.6.1.4.1.2356.16.1.1.2.2.2.1.8ColumnagentLagSummaryDeletePortread-writecurrentAgent LAG DeletePort. Set to a non 0 value to remove a port from the LAG. Values correspond to ifIndex values in the ifTable.
1.3.6.1.4.1.2356.16.1.1.2.2.2.1.9ColumnagentLagSummaryStatusread-writecurrentAgent LAG Status. active(1) - This LAG is enabled. destroy(6) - Set to this value to remove the LAG.
1.3.6.1.4.1.2356.16.1.1.2.2.2.1.10ColumnagentLagSummaryTyperead-onlycurrentAgent LAG Type. static(1) - This LAG is staticly maintained. dynamic(2) - This LAG is dynamicly maintained.
1.3.6.1.4.1.2356.16.1.1.2.2.2.1.11ColumnagentLagSummaryStaticCapabilityread-writecurrentAgent LAG Static Capability enable(1) - Static capability is enabled for this LAG interface disable(2) - Static capability is disabled for this LAG interface
1.3.6.1.4.1.2356.16.1.1.2.2.2.1.12ColumnagentLagSummaryHashOptionread-writecurrentLAG Hashing Option. Valid values correspond to 1 (=Source MAC, VLAN, EtherType, and incoming port associated with the packet) 2 (=Destination MAC, VLAN, EtherT…
1.3.6.1.4.1.2356.16.1.1.2.2.2.1.13ColumnagentLagSummaryMinimumActiveLinksread-writecurrentAgent LAG Threshold. This configures the threshold(i.e minimum number of active ports) value for trunk port .
1.3.6.1.4.1.2356.16.1.1.2.2.2.1.14ColumnagentLagSummaryLocalPreferenceModeread-writecurrentAgent LAG Local Preference Mode. Enables or disables the LAG interface's Local Preference Mode.
1.3.6.1.4.1.2356.16.1.1.2.2.2.1.15ColumnagentLagSummaryMtuValueread-writecurrentConfigures the MTU value for this LAG interface. The maximum value is dependent on the platform.
1.3.6.1.4.1.2356.16.1.1.2.2.2.1.17ColumnagentLagSummaryPortCounterread-onlycurrentLAG port flap counter.
1.3.6.1.4.1.2356.16.1.1.2.2.2.1.18ColumnagentLagSummaryRateLoadIntervalread-writecurrentThe length of time for which data is used to compute load statistics. The value is given in seconds, and must be a multiple of 30. The allowable range is 30 to…
1.3.6.1.4.1.2356.16.1.1.2.2.3TableagentLagDetailedConfigTablenot-accessiblecurrentA detailed table of the switch's LAG config entries
1.3.6.1.4.1.2356.16.1.1.2.2.3.1RowagentLagDetailedConfigEntrynot-accessiblecurrentSwitch's LAG config entry
1.3.6.1.4.1.2356.16.1.1.2.2.3.1.1ColumnagentLagDetailedLagIndexread-onlycurrentLAG index
1.3.6.1.4.1.2356.16.1.1.2.2.3.1.2ColumnagentLagDetailedIfIndexread-onlycurrentLAG port index
1.3.6.1.4.1.2356.16.1.1.2.2.3.1.3ColumnagentLagDetailedPortSpeedread-onlycurrentLAG port speed. See agentPortType for a description and list of valid values.
1.3.6.1.4.1.2356.16.1.1.2.2.3.1.4ColumnagentLagDetailedPortStatusread-onlycurrentLAG port status. active(1) - Actively participating in the LAG. inactive(2) - Not participating in the LAG.
1.3.6.1.4.1.2356.16.1.1.2.2.3.1.5ColumnagentLagDetailedPortCounterread-onlycurrentLAG port flap counter.
1.3.6.1.4.1.2356.16.1.1.2.2.4ScalaragentLagConfigStaticCapabilityread-writeobsoleteAgent LAG Static Capability. Configures whether Static LAGs are supported on this device.
1.3.6.1.4.1.2356.16.1.1.2.2.5ScalaragentLagConfigGroupHashOptionread-writecurrentLAG Hashing Option. Valid values correspond to 1 (=Source MAC, VLAN, EtherType, and incoming port associated with the packet) 2 (=Destination MAC, VLAN, EtherT…
1.3.6.1.4.1.2356.16.1.1.2.2.6ScalaragentLagClearCountersread-writecurrentClear LAG stats. Will always return 0 when read.
1.3.6.1.4.1.2356.16.1.1.2.3NodeagentNetworkConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.3.1ScalaragentNetworkIPAddressread-writecurrentThe switch's network ip address
1.3.6.1.4.1.2356.16.1.1.2.3.2ScalaragentNetworkSubnetMaskread-writecurrentThe switch's network subnet mask
1.3.6.1.4.1.2356.16.1.1.2.3.3ScalaragentNetworkDefaultGatewayread-writecurrentThe switch's network default gateway
1.3.6.1.4.1.2356.16.1.1.2.3.4ScalaragentNetworkBurnedInMacAddressread-onlycurrentThe switch's network Burned-In MAC address
1.3.6.1.4.1.2356.16.1.1.2.3.5ScalaragentNetworkLocalAdminMacAddressread-writecurrentThe switch's network locally administered MAC address
1.3.6.1.4.1.2356.16.1.1.2.3.6ScalaragentNetworkMacAddressTyperead-onlycurrentThe switch's network Mac Address Type
1.3.6.1.4.1.2356.16.1.1.2.3.7ScalaragentNetworkConfigProtocolread-writecurrentThe switch's network config protocol
1.3.6.1.4.1.2356.16.1.1.2.3.8ScalaragentNetworkConfigProtocolDhcpRenewread-writecurrentThe switch's network config protocol dhcp is renewed. Will always return 0 when read.
1.3.6.1.4.1.2356.16.1.1.2.3.9ScalaragentNetworkWebModeread-writeobsoleteThe switch's network config protocol on next bootup This object has been obsoleted by agentHTTPWebMode.
1.3.6.1.4.1.2356.16.1.1.2.3.10ScalaragentNetworkJavaModeread-writeobsoleteConfigures the use of the Java interface through the Web. This object has been obsoleted by agentHTTPJavaMode.
1.3.6.1.4.1.2356.16.1.1.2.3.11ScalaragentNetworkMgmtVlanread-writecurrentThe VLAN ID through which the switch can be managed using the agentNetworkIPAddress
1.3.6.1.4.1.2356.16.1.1.2.3.12ScalaragentNetworkIpv6AdminModeread-writecurrentThe network port IPv6 administrative state
1.3.6.1.4.1.2356.16.1.1.2.3.13ScalaragentNetworkIpv6Gatewayread-writecurrentThe network port IPv6 Gateway Address
1.3.6.1.4.1.2356.16.1.1.2.3.14TableagentNetworkIpv6AddrTablenot-accessiblecurrentThe list of IPv6 address prefixes for the network port.
1.3.6.1.4.1.2356.16.1.1.2.3.14.1RowagentNetworkIpv6AddrEntrynot-accessiblecurrentAn interface entry containing objects of a particular IPv6 address prefix
1.3.6.1.4.1.2356.16.1.1.2.3.14.1.1ColumnagentNetworkIpv6AddrPrefixnot-accessiblecurrentThe service port IPv6 Address Prefix
1.3.6.1.4.1.2356.16.1.1.2.3.14.1.2ColumnagentNetworkIpv6AddrPrefixLengthread-createcurrentThe service port IPv6 Address Prefix Length
1.3.6.1.4.1.2356.16.1.1.2.3.14.1.3ColumnagentNetworkIpv6AddrEuiFlagread-createcurrentThe service port IPv6 Eui Flag
1.3.6.1.4.1.2356.16.1.1.2.3.14.1.4ColumnagentNetworkIpv6AddrStatusread-createcurrent
1.3.6.1.4.1.2356.16.1.1.2.3.15ScalaragentNetworkIpv6AddressAutoConfigread-writecurrentThe ipv6 address autoconfig allows the device to perform IPv6 stateless address auto-configuration to discover prefixes on the link and then to add the eui-64 …
1.3.6.1.4.1.2356.16.1.1.2.3.16ScalaragentNetworkIpv6ConfigProtocolread-writecurrentThe switch's network IPv6 config protocol
1.3.6.1.4.1.2356.16.1.1.2.3.17ScalaragentNetworkDhcp6ClientDuidread-onlycurrentThe DHCPv6 Client unique DUID. This value cannot be modified
1.3.6.1.4.1.2356.16.1.1.2.3.18NodeagentNetworkStatsGroup
1.3.6.1.4.1.2356.16.1.1.2.3.18.1ScalaragentNetworkDhcp6ADVERTISEMessagesReceivedread-onlycurrentThe number of DHCPv6 messages of type ADVERTISE that have been received by the DHCPv6 client on the network port.
1.3.6.1.4.1.2356.16.1.1.2.3.18.2ScalaragentNetworkDhcp6REPLYMessagesReceivedread-onlycurrentThe number of DHCPv6 messages of type REPLY that have been received by the DHCPv6 client on the network port.
1.3.6.1.4.1.2356.16.1.1.2.3.18.3ScalaragentNetworkDhcp6ADVERTISEMessagesDiscardedread-onlycurrentThe number of DHCPv6 messages of type ADVERTISE that have been discarded by the DHCPv6 client on the network port.
1.3.6.1.4.1.2356.16.1.1.2.3.18.4ScalaragentNetworkDhcp6REPLYMessagesDiscardedread-onlycurrentThe number of DHCPv6 messages of type REPLY that have been discarded by the DHCPv6 client on the network port.
1.3.6.1.4.1.2356.16.1.1.2.3.18.5ScalaragentNetworkDhcp6MalformedMessagesReceivedread-onlycurrentThe number of DHCPv6 messages received malformed by the DHCPv6 client on the network port.
1.3.6.1.4.1.2356.16.1.1.2.3.18.6ScalaragentNetworkDhcp6SOLICITMessagesSentread-onlycurrentThe number of DHCPv6 messages of type SOLICIT that have been sent by the DHCPv6 client on the network port.
1.3.6.1.4.1.2356.16.1.1.2.3.18.7ScalaragentNetworkDhcp6REQUESTMessagesSentread-onlycurrentThe number of DHCPv6 messages of type REQUEST that have been sent by the DHCPv6 client on the network port.
1.3.6.1.4.1.2356.16.1.1.2.3.18.8ScalaragentNetworkDhcp6RENEWMessagesSentread-onlycurrentThe number of DHCPv6 messages of type RENEW that have been sent by the DHCPv6 client on the network port.
1.3.6.1.4.1.2356.16.1.1.2.3.18.9ScalaragentNetworkDhcp6REBINDMessagesSentread-onlycurrentThe number of DHCPv6 messages of type REBIND that have been sent by the DHCPv6 client on the network port.
1.3.6.1.4.1.2356.16.1.1.2.3.18.10ScalaragentNetworkDhcp6RELEASEMessagesSentread-onlycurrentThe number of DHCPv6 messages of type RELEASE that have been sent by the DHCPv6 client on the network port.
1.3.6.1.4.1.2356.16.1.1.2.3.18.11ScalaragentNetworkDhcp6StatsResetread-writecurrentClear the DHCPv6 Client statistics on the network port. A value of reset(1) is used to reset the statistics. A read on this object will always return the value…
1.3.6.1.4.1.2356.16.1.1.2.3.18.12ScalaragentNetworkDhcp6DECLINEMessagesSentread-onlycurrentThe number of DHCPv6 messages of type DECLINE that have been sent by the DHCPv6 client on the network port.
1.3.6.1.4.1.2356.16.1.1.2.3.18.13ScalaragentNetworkDhcp6CONFIRMMessagesSentread-onlycurrentThe number of DHCPv6 messages of type CONFIRM that have been sent by the DHCPv6 client on the network port.
1.3.6.1.4.1.2356.16.1.1.2.3.18.14ScalaragentNetworkDhcp6TOTALMessagesSentread-onlycurrentThe TOTAL number of DHCPv6 packets that have been sent by the DHCPv6 client on the network port.
1.3.6.1.4.1.2356.16.1.1.2.3.18.15ScalaragentNetworkDhcp6TOTALMessagesRecvread-onlycurrentThe total number of packets received by the DHCPv6 client on the network port.
1.3.6.1.4.1.2356.16.1.1.2.3.101ScalaragentNetworkStaticIPAddressread-writecurrentThe switch's network ip address
1.3.6.1.4.1.2356.16.1.1.2.3.102ScalaragentNetworkStaticSubnetMaskread-writecurrentThe switch's network subnet mask
1.3.6.1.4.1.2356.16.1.1.2.3.103ScalaragentNetworkStaticDefaultGatewayread-writecurrentThe switch's network default gateway
1.3.6.1.4.1.2356.16.1.1.2.4NodeagentServicePortConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.4.1ScalaragentServicePortIPAddressread-writecurrentThe switch's ServicePort ip address
1.3.6.1.4.1.2356.16.1.1.2.4.2ScalaragentServicePortSubnetMaskread-writecurrentThe switch's ServicePort subnet mask
1.3.6.1.4.1.2356.16.1.1.2.4.3ScalaragentServicePortDefaultGatewayread-writecurrentThe switch's ServicePort default gateway
1.3.6.1.4.1.2356.16.1.1.2.4.4ScalaragentServicePortBurnedInMacAddressread-onlycurrentThe switch's ServicePort Burned-In MAC address
1.3.6.1.4.1.2356.16.1.1.2.4.5ScalaragentServicePortConfigProtocolread-writecurrentThe switch's ServicePort config protocol
1.3.6.1.4.1.2356.16.1.1.2.4.6ScalaragentServicePortProtocolDhcpRenewread-writecurrentThe switch's ServicePort protocol dhcp is renewed. Will always return 0 when read.
1.3.6.1.4.1.2356.16.1.1.2.4.7ScalaragentServicePortIpv6AdminModeread-writecurrentThe service port IPv6 administrative state
1.3.6.1.4.1.2356.16.1.1.2.4.8ScalaragentServicePortIpv6Gatewayread-writecurrentThe service port IPv6 Gateway Address
1.3.6.1.4.1.2356.16.1.1.2.4.9TableagentServicePortIpv6AddrTablenot-accessiblecurrentThe list of IPv6 address prefixes for the service port.
1.3.6.1.4.1.2356.16.1.1.2.4.9.1RowagentServicePortIpv6AddrEntrynot-accessiblecurrentAn interface entry containing objects of a particular IPv6 address prefix
1.3.6.1.4.1.2356.16.1.1.2.4.9.1.1ColumnagentServicePortIpv6AddrPrefixnot-accessiblecurrentThe service port IPv6 Address Prefix
1.3.6.1.4.1.2356.16.1.1.2.4.9.1.2ColumnagentServicePortIpv6AddrPrefixLengthread-createcurrentThe service port IPv6 Address Prefix Length
1.3.6.1.4.1.2356.16.1.1.2.4.9.1.3ColumnagentServicePortIpv6AddrEuiFlagread-createcurrentThe service port IPv6 Eui Flag
1.3.6.1.4.1.2356.16.1.1.2.4.9.1.4ColumnagentServicePortIpv6AddrStatusread-createcurrent
1.3.6.1.4.1.2356.16.1.1.2.4.10ScalaragentServicePortIpv6AddressAutoConfigread-writecurrentThe ipv6 address autoconfig allows the device to perform IPv6 stateless address auto-configuration to discover prefixes on the link and then to add the eui-64 …
1.3.6.1.4.1.2356.16.1.1.2.4.11ScalaragentServicePortIpv6ConfigProtocolread-writecurrentThe service port IPv6 protocol configured on the switch.
1.3.6.1.4.1.2356.16.1.1.2.4.12ScalaragentServicePortDhcp6ClientDuidread-onlycurrentThe DHCPv6 Client unique DUID. This value cannot be modified
1.3.6.1.4.1.2356.16.1.1.2.4.13NodeagentServicePortStatsGroup
1.3.6.1.4.1.2356.16.1.1.2.4.13.1ScalaragentServicePortDhcp6ADVERTISEMessagesReceivedread-onlycurrentThe number of DHCPv6 messages of type ADVERTISE that have been received by the DHCPv6 client on the service port.
1.3.6.1.4.1.2356.16.1.1.2.4.13.2ScalaragentServicePortDhcp6REPLYMessagesReceivedread-onlycurrentThe number of DHCPv6 messages of type REPLY that have been received by the DHCPv6 client on the service port.
1.3.6.1.4.1.2356.16.1.1.2.4.13.3ScalaragentServicePortDhcp6ADVERTISEMessagesDiscardedread-onlycurrentThe number of DHCPv6 messages of type ADVERTISE that have been discarded by the DHCPv6 client on the service port.
1.3.6.1.4.1.2356.16.1.1.2.4.13.4ScalaragentServicePortDhcp6REPLYMessagesDiscardedread-onlycurrentThe number of DHCPv6 messages of type REPLY that have been discarded by the DHCPv6 client on the service port.
1.3.6.1.4.1.2356.16.1.1.2.4.13.5ScalaragentServicePortDhcp6MalformedMessagesReceivedread-onlycurrentThe number of DHCPv6 messages received malformed by the DHCPv6 client on the service port.
1.3.6.1.4.1.2356.16.1.1.2.4.13.6ScalaragentServicePortDhcp6SOLICITMessagesSentread-onlycurrentThe number of DHCPv6 messages of type SOLICIT that have been sent by the DHCPv6 client on the service port.
1.3.6.1.4.1.2356.16.1.1.2.4.13.7ScalaragentServicePortDhcp6REQUESTMessagesSentread-onlycurrentThe number of DHCPv6 messages of type REQUEST that have been sent by the DHCPv6 client on the service port.
1.3.6.1.4.1.2356.16.1.1.2.4.13.8ScalaragentServicePortDhcp6RENEWMessagesSentread-onlycurrentThe number of DHCPv6 messages of type RENEW that have been sent by the DHCPv6 client on the service port.
1.3.6.1.4.1.2356.16.1.1.2.4.13.9ScalaragentServicePortDhcp6REBINDMessagesSentread-onlycurrentThe number of DHCPv6 messages of type REBIND that have been sent by the DHCPv6 client on the service port.
1.3.6.1.4.1.2356.16.1.1.2.4.13.10ScalaragentServicePortDhcp6RELEASEMessagesSentread-onlycurrentThe number of DHCPv6 messages of type RELEASE that have been sent by the DHCPv6 client on the service port.
1.3.6.1.4.1.2356.16.1.1.2.4.13.11ScalaragentServicePortDhcp6StatsResetread-writecurrentClear the DHCPv6 Client statistics on the service port. A value of reset(1) is used to reset the statistics. A read on this object will always return the value…
1.3.6.1.4.1.2356.16.1.1.2.4.13.12ScalaragentServicePortDhcp6DECLINEMessagesSentread-onlycurrentThe number of DHCPv6 messages of type DECLINE that have been sent by the DHCPv6 client on the service port.
1.3.6.1.4.1.2356.16.1.1.2.4.13.13ScalaragentServicePortDhcp6CONFIRMMessagesSentread-onlycurrentThe number of DHCPv6 messages of type CONFIRM that have been sent by the DHCPv6 client on the service port.
1.3.6.1.4.1.2356.16.1.1.2.4.13.14ScalaragentServicePortDhcp6TOTALMessagesSentread-onlycurrentThe total number of DHCPv6 packets that have been sent by the DHCPv6 client on the service port.
1.3.6.1.4.1.2356.16.1.1.2.4.13.15ScalaragentServicePortDhcp6TOTALMessagesRecvread-onlycurrentThe total number of DHCPv6 that have been received by the DHCPv6 client on the service port.
1.3.6.1.4.1.2356.16.1.1.2.5NodeagentDhcpClientOptionsConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.5.1NodeagentVendorClassOptionConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.5.1.1ScalaragentDhcpClientVendorClassIdModeread-writecurrentThis object indicates whether DHCP Vendor Classifier Id Option (60) is enabled for DHCP Network Client. If this object is set to 'true', DHCP Vendor Classifier…
1.3.6.1.4.1.2356.16.1.1.2.5.1.2ScalaragentDhcpClientVendorClassIdStringread-writecurrentWhen this object is set with a non-empty string, the DHCP Vendor Classifier Id Option (60) string is enabled for DHCP Network Client.
1.3.6.1.4.1.2356.16.1.1.2.6NodeagentSnmpConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.6.5NodeagentSnmpTrapFlagsConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.6.5.1ScalaragentSnmpAuthenticationTrapFlagread-writecurrentAuthentication Flag - Enable/Disable authentication Flag.
1.3.6.1.4.1.2356.16.1.1.2.6.5.2ScalaragentSnmpLinkUpDownTrapFlagread-writecurrentLink Up/Down Flag - Enable/Disable Link Up/Link Down traps for the entire switch. When set to Enable, the Link Up/Down traps will be sent only if the Link Trap…
1.3.6.1.4.1.2356.16.1.1.2.6.5.3ScalaragentSnmpMultipleUsersTrapFlagread-writecurrentMultiple Users Flag - Enable/Disable Multiple User traps. When the value is set to Enable, a Multiple User Trap is sent whenever someone logs in to the termina…
1.3.6.1.4.1.2356.16.1.1.2.6.5.4ScalaragentSnmpSpanningTreeTrapFlagread-writecurrentSpanning Tree Flag - This flag enables the sending of new root traps and topology change notification traps.
1.3.6.1.4.1.2356.16.1.1.2.6.5.5ScalaragentSnmpBroadcastStormTrapFlagread-writeobsoleteBroadcast Storm Flag - This flag enables or disables the broadcast storm trap. You must also enable Broadcast Storm Recovery Mode (see the Switch Configuration…
1.3.6.1.4.1.2356.16.1.1.2.6.6ScalaragentSnmpTrapSourceInterfaceread-writecurrentA source-interface selection on an Interface Index (like vlan based routing interface, port based routing interface, loopback interface, tunnel interface). A n…
1.3.6.1.4.1.2356.16.1.1.2.6.7ScalaragentSnmpServerPortNumread-writecurrentGet/Set the UDP port number that the SNMP server listens to for incoming requests. The port number is an integer value from 1025 to 65535. Before setting this …
1.3.6.1.4.1.2356.16.1.1.2.6.8ScalaragentSnmpTrapServicePortSrcInterfaceread-writecurrentTo select Service Port as a source-interface.
1.3.6.1.4.1.2356.16.1.1.2.6.9ScalaragentSnmpTrapDefaultPortNumread-writecurrentGet/Set the default UDP port number that the SNMP agent sends traps and notifications. The port number is an integer value from 1025 to 65535. Before setting t…
1.3.6.1.4.1.2356.16.1.1.2.7NodeagentSpanningTreeConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.7.1ScalaragentSpanningTreeModeread-writeobsoleteThe switch's Spanning Tree Switch Status. This functionality is now handled by agentStpAdminMode
1.3.6.1.4.1.2356.16.1.1.2.8NodeagentSwitchConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.8.3ScalaragentSwitchFdbAddressAgingTimeoutread-writecurrentThe address aging timeout. Specifies aging time in seconds (10 - 1000000) before a dynamic MAC address is erased from the Filtering Database. The default value…
1.3.6.1.4.1.2356.16.1.1.2.8.4TableagentSwitchAddressAgingTimeoutTablenot-accessibledeprecatedThe switch's address aging timeout table. This functionality is now handled by agentSwitchFdbAddressAgingTimeout.
1.3.6.1.4.1.2356.16.1.1.2.8.4.1RowagentSwitchAddressAgingTimeoutEntrynot-accessibledeprecatedAging information about a specific Filtering Database.
1.3.6.1.4.1.2356.16.1.1.2.8.4.1.1ColumnagentSwitchAddressAgingTimeoutread-writedeprecatedThe FDB entry's address aging timeout (in seconds)
1.3.6.1.4.1.2356.16.1.1.2.8.5TableagentSwitchStaticMacFilteringTablenot-accessiblecurrentThe switch's static Mac filtering table
1.3.6.1.4.1.2356.16.1.1.2.8.5.1RowagentSwitchStaticMacFilteringEntrynot-accessiblecurrentPer-port ingress/egress filter configuration based on VLAN Id and MAC address.
1.3.6.1.4.1.2356.16.1.1.2.8.5.1.1ColumnagentSwitchStaticMacFilteringVlanIdread-onlycurrentThe Static MAC Filter Vlan Id
1.3.6.1.4.1.2356.16.1.1.2.8.5.1.2ColumnagentSwitchStaticMacFilteringAddressread-onlycurrentThe Static MAC Filter MAC address
1.3.6.1.4.1.2356.16.1.1.2.8.5.1.3ColumnagentSwitchStaticMacFilteringSourcePortMaskread-writecurrentThe Static MAC Filter source port mask. When setting this value, the system will ignore configuration for ports not between the first and last valid ports. Con…
1.3.6.1.4.1.2356.16.1.1.2.8.5.1.4ColumnagentSwitchStaticMacFilteringDestPortMaskread-writecurrentThe Static MAC Filter destination port mask. When setting this value, the system will ignore configuration for ports not between the first and last valid ports…
1.3.6.1.4.1.2356.16.1.1.2.8.5.1.5ColumnagentSwitchStaticMacFilteringStatusread-createcurrentThe Static MAC Filter status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry
1.3.6.1.4.1.2356.16.1.1.2.8.6NodeagentSwitchSnoopingGroup
1.3.6.1.4.1.2356.16.1.1.2.8.6.1TableagentSwitchSnoopingCfgTablenot-accessiblecurrentA table of the IGMP/MLD Snooping Global configuration entries.
1.3.6.1.4.1.2356.16.1.1.2.8.6.1.1RowagentSwitchSnoopingCfgEntrynot-accessiblecurrentRepresents entry for Snooping switch Configuration.
1.3.6.1.4.1.2356.16.1.1.2.8.6.1.1.1ColumnagentSwitchSnoopingProtocolread-onlycurrentThe protocol type of network protocol in use.
1.3.6.1.4.1.2356.16.1.1.2.8.6.1.1.2ColumnagentSwitchSnoopingAdminModeread-writecurrentThis enables or disables Snooping on the system.
1.3.6.1.4.1.2356.16.1.1.2.8.6.1.1.3ColumnagentSwitchSnoopingPortMaskread-writecurrentIGMP/MLD Snooping Port Mask. This allows configuration of IGMP/MLD Snooping on selected ports. IGMP/MLD Snooping cannot be enabled on an interface that has rou…
1.3.6.1.4.1.2356.16.1.1.2.8.6.1.1.4ColumnagentSwitchSnoopingMulticastControlFramesProcessedread-onlycurrentMulticast Control Frames Processed by CPU. The number of multicast control frames that have been processed by the CPU.
1.3.6.1.4.1.2356.16.1.1.2.8.7NodeagentSwitchSnoopingIntfGroup
1.3.6.1.4.1.2356.16.1.1.2.8.7.1TableagentSwitchSnoopingIntfTablenot-accessiblecurrentA table of the IGMP/MLD Snooping Interface configuration entries.
1.3.6.1.4.1.2356.16.1.1.2.8.7.1.1RowagentSwitchSnoopingIntfEntrynot-accessiblecurrentRepresents entry for a IGMP/MLD Snooping Interface.
1.3.6.1.4.1.2356.16.1.1.2.8.7.1.1.1ColumnagentSwitchSnoopingIntfIndexread-onlycurrentThe port number to be selected. Each port maps to an interface.
1.3.6.1.4.1.2356.16.1.1.2.8.7.1.1.2ColumnagentSwitchSnoopingIntfAdminModeread-writecurrentThis enables or disables IGMP/MLD Snooping on a selected interface.
1.3.6.1.4.1.2356.16.1.1.2.8.7.1.1.3ColumnagentSwitchSnoopingIntfGroupMembershipIntervalread-writecurrentThe amount of time in seconds that a switch will wait for a report from a particular group on the selected interface before deleting the interface from the ent…
1.3.6.1.4.1.2356.16.1.1.2.8.7.1.1.4ColumnagentSwitchSnoopingIntfMaxResponseTimeread-writecurrentThe amount of time in seconds a switch will wait after sending a query on the selected interface because it did not receive a report for a particular group in …
1.3.6.1.4.1.2356.16.1.1.2.8.7.1.1.5ColumnagentSwitchSnoopingIntfMRPExpirationTimeread-writecurrentThe amount of time in seconds that a switch will wait for a query to be received on the selected interface before the interface is removed from the list of int…
1.3.6.1.4.1.2356.16.1.1.2.8.7.1.1.6ColumnagentSwitchSnoopingIntfFastLeaveAdminModeread-writecurrentThis enables or disables IGMP/MLD Snooping on the selected interface.
1.3.6.1.4.1.2356.16.1.1.2.8.7.1.1.7ColumnagentSwitchSnoopingIntfMulticastRouterModeread-writecurrentThis enables or disables Multicast Routing on the selected interface.
1.3.6.1.4.1.2356.16.1.1.2.8.7.1.1.8ColumnagentSwitchSnoopingIntfVlanIDsread-onlycurrentThis field lists all the VlanIDs which include the selected interface.
1.3.6.1.4.1.2356.16.1.1.2.8.8NodeagentSwitchSnoopingVlanGroup
1.3.6.1.4.1.2356.16.1.1.2.8.8.1TableagentSwitchSnoopingVlanTablenot-accessiblecurrentA table of the IGMP/MLD Snooping Vlan configuration entries.
1.3.6.1.4.1.2356.16.1.1.2.8.8.1.1RowagentSwitchSnoopingVlanEntrynot-accessiblecurrentRepresents entry for a IGMP/MLD Snooping Vlan.
1.3.6.1.4.1.2356.16.1.1.2.8.8.1.1.1ColumnagentSwitchSnoopingVlanAdminModeread-writecurrentThis enables or disables IGMP/MLD Snooping on a selected Vlan interface.
1.3.6.1.4.1.2356.16.1.1.2.8.8.1.1.2ColumnagentSwitchSnoopingVlanGroupMembershipIntervalread-writecurrentThe amount of time in seconds that a switch will wait for a report from a particular group on the selected vlan before deleting the interface participating in …
1.3.6.1.4.1.2356.16.1.1.2.8.8.1.1.3ColumnagentSwitchSnoopingVlanMaxResponseTimeread-writecurrentThe amount of time in seconds a switch will wait after sending a query on the selected vlan because it did not receive a report for a particular group in the i…
1.3.6.1.4.1.2356.16.1.1.2.8.8.1.1.4ColumnagentSwitchSnoopingVlanFastLeaveAdminModeread-writecurrentThis enables or disables IGMP/MLD Snooping on the selected vlan.
1.3.6.1.4.1.2356.16.1.1.2.8.8.1.1.5ColumnagentSwitchSnoopingVlanMRPExpirationTimeread-writecurrentThe amount of time in seconds that a switch will wait for a query to be received on the selected interface participating in the vlan before the interface is re…
1.3.6.1.4.1.2356.16.1.1.2.8.8.1.1.6ColumnagentSwitchSnoopingVlanReportSuppModeread-writecurrentThis enables or disables IGMP Snooping Report Suppression feature on the selected vlan.
1.3.6.1.4.1.2356.16.1.1.2.8.9NodeagentSwitchVlanStaticMrouterGroup
1.3.6.1.4.1.2356.16.1.1.2.8.9.1TableagentSwitchVlanStaticMrouterTablenot-accessiblecurrentA table of the IGMP/MLD Static Mrouter Configuration parameters.
1.3.6.1.4.1.2356.16.1.1.2.8.9.1.1RowagentSwitchVlanStaticMrouterEntrynot-accessiblecurrentRepresents entry for a IGMP/MLD Static Mrouter.
1.3.6.1.4.1.2356.16.1.1.2.8.9.1.1.1ColumnagentSwitchVlanStaticMrouterAdminModeread-writecurrentThis enables or disables IGMP/MLD Mrouter on a per-interface per-vlan basis.
1.3.6.1.4.1.2356.16.1.1.2.8.10NodeagentSwitchMFDBGroup
1.3.6.1.4.1.2356.16.1.1.2.8.10.1TableagentSwitchMFDBTablenot-accessiblecurrentThe Multicast Forwarding Database table
1.3.6.1.4.1.2356.16.1.1.2.8.10.1.1RowagentSwitchMFDBEntrynot-accessiblecurrentContains Forwarding and Filtering information per Vlan Index, MAC Address, and Component User.
1.3.6.1.4.1.2356.16.1.1.2.8.10.1.1.1ColumnagentSwitchMFDBVlanIdread-onlycurrentVlan Index for which this entry is associated with.
1.3.6.1.4.1.2356.16.1.1.2.8.10.1.1.2ColumnagentSwitchMFDBMacAddressread-onlycurrentA multicast MAC address for which the switch has forwarding and or filtering information.
1.3.6.1.4.1.2356.16.1.1.2.8.10.1.1.3ColumnagentSwitchMFDBProtocolTyperead-onlycurrentThe component that is responsible for this entry in the Multicast Forwarding Database.
1.3.6.1.4.1.2356.16.1.1.2.8.10.1.1.4ColumnagentSwitchMFDBTyperead-onlycurrentThis displays the type of the entry. static(1) - Entries configured by the end user dynamic(2) - Entries added as a result of a learning process or protocol
1.3.6.1.4.1.2356.16.1.1.2.8.10.1.1.5ColumnagentSwitchMFDBDescriptionread-onlycurrentText description of this multicast table entry.
1.3.6.1.4.1.2356.16.1.1.2.8.10.1.1.6ColumnagentSwitchMFDBForwardingPortMaskread-onlycurrentBitMask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort …
1.3.6.1.4.1.2356.16.1.1.2.8.10.1.1.7ColumnagentSwitchMFDBFilteringPortMaskread-onlycurrentBitMask indicating which ports this entry indicates should be filtered. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort a…
1.3.6.1.4.1.2356.16.1.1.2.8.10.2TableagentSwitchMFDBSummaryTablenot-accessiblecurrentThe Multicast Forwarding Database Summary table
1.3.6.1.4.1.2356.16.1.1.2.8.10.2.1RowagentSwitchMFDBSummaryEntrynot-accessiblecurrentSummarizes the forwarding ports for all components registered for all MFDB table entries with the same Vlan Index and MAC Address.
1.3.6.1.4.1.2356.16.1.1.2.8.10.2.1.1ColumnagentSwitchMFDBSummaryVlanIdread-onlycurrentVlan Index for which this entry is associated with.
1.3.6.1.4.1.2356.16.1.1.2.8.10.2.1.2ColumnagentSwitchMFDBSummaryMacAddressread-onlycurrentA multicast MAC address for which the switch has forwarding and or filtering information.
1.3.6.1.4.1.2356.16.1.1.2.8.10.2.1.3ColumnagentSwitchMFDBSummaryForwardingPortMaskread-onlycurrentPort Mask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePor…
1.3.6.1.4.1.2356.16.1.1.2.8.10.3ScalaragentSwitchMFDBMaxTableEntriesread-onlycurrentThis displays the maximum number of entries that can possibly be in the Multicast Forwarding Database table.
1.3.6.1.4.1.2356.16.1.1.2.8.10.4ScalaragentSwitchMFDBMostEntriesUsedread-onlycurrentThis displays the largest number of entries that have been present in the Multicast Forwarding Database table. This value is also known as the MFDB high-water …
1.3.6.1.4.1.2356.16.1.1.2.8.10.5ScalaragentSwitchMFDBCurrentEntriesread-onlycurrentThis displays the current number of entries in the Multicast Forwarding Database table.
1.3.6.1.4.1.2356.16.1.1.2.8.11NodeagentSwitchDVlanTagGroup
1.3.6.1.4.1.2356.16.1.1.2.8.11.1ScalaragentSwitchDVlanTagEthertyperead-writecurrentConfigures the Double Vlan Tag Ethertype for the switch. If this object is supported, ethertype cannot be configured per port. Commonly used are the Ethertypes…
1.3.6.1.4.1.2356.16.1.1.2.8.11.2TableagentSwitchDVlanTagTablenot-accessiblecurrentA table of entries specifying the ethertype (TPID) values. This will let the user specify multiple ethertypes globally.
1.3.6.1.4.1.2356.16.1.1.2.8.11.2.1RowagentSwitchDVlanTagEntrynot-accessiblecurrentA table entry specifying the ethertype (TPID) values. Commonly used are the Ethertypes for vman tags (34984, or 0x88A8) and dot1q tags (33024, or 0x8100).
1.3.6.1.4.1.2356.16.1.1.2.8.11.2.1.1ColumnagentSwitchDVlanTagTPidnot-accessiblecurrentEthertype value to identify incoming double tagged frames
1.3.6.1.4.1.2356.16.1.1.2.8.11.2.1.2ColumnagentSwitchDVlanTagPrimaryTPidread-createcurrentSpecifies if this TPID is primary TPID for the switch or not. As the system needs one TPID to be active all the time, setting the object to false doesn't modif…
1.3.6.1.4.1.2356.16.1.1.2.8.11.2.1.3ColumnagentSwitchDVlanTagRowStatusread-createcurrentRow status
1.3.6.1.4.1.2356.16.1.1.2.8.11.3TableagentSwitchPortDVlanTagTablenot-accessiblecurrentA table entries specifying the ethertype (TPID) values per port.
1.3.6.1.4.1.2356.16.1.1.2.8.11.3.1RowagentSwitchPortDVlanTagEntrynot-accessiblecurrentA table entry specifying the ethertype (TPID) value for a port.
1.3.6.1.4.1.2356.16.1.1.2.8.11.3.1.1ColumnagentSwitchPortDVlanTagInterfaceIfIndexnot-accessiblecurrentPort Id on to which the Ethertype value is mapped
1.3.6.1.4.1.2356.16.1.1.2.8.11.3.1.2ColumnagentSwitchPortDVlanTagTPidnot-accessiblecurrentEthertype value to identify incoming double tagged frames
1.3.6.1.4.1.2356.16.1.1.2.8.11.3.1.3ColumnagentSwitchPortDVlanTagModeread-createcurrentControls the Double Vlan Tag mode on this port.
1.3.6.1.4.1.2356.16.1.1.2.8.11.3.1.4ColumnagentSwitchPortDVlanTagCustomerIdread-createcurrentConfigures the Customer ID for the Double Vlan Tag for this port.
1.3.6.1.4.1.2356.16.1.1.2.8.11.3.1.5ColumnagentSwitchPortDVlanTagRowStatusread-createcurrentRow status
1.3.6.1.4.1.2356.16.1.1.2.8.12NodeagentSwitchStormControlGroup
1.3.6.1.4.1.2356.16.1.1.2.8.12.1ScalaragentSwitchDot3FlowControlModeread-writecurrentConfig switchconfig flowcontrol allows you to enable or disable 802.3x flow control for the switch. This value applies to only full-duplex mode ports. Enabling…
1.3.6.1.4.1.2356.16.1.1.2.8.12.4ScalaragentSwitchBroadcastControlModeread-writecurrentThe switch config broadcast allows you to enable or disable broadcast storm recovery mode. When you specify Enable for Broadcast Storm Recovery and the broadca…
1.3.6.1.4.1.2356.16.1.1.2.8.12.5ScalaragentSwitchBroadcastControlThresholdread-writecurrentConfigures the broadcast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.
1.3.6.1.4.1.2356.16.1.1.2.8.12.6ScalaragentSwitchMulticastControlModeread-writecurrentThe switch config multicast allows you to enable or disable multicast storm recovery mode. When you specify Enable for multicast Storm Recovery and the multica…
1.3.6.1.4.1.2356.16.1.1.2.8.12.7ScalaragentSwitchMulticastControlThresholdread-writecurrentConfigures the multicast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.
1.3.6.1.4.1.2356.16.1.1.2.8.12.8ScalaragentSwitchUnicastControlModeread-writecurrentThe switch config unicast allows you to enable or disable unicast storm recovery mode. When you specify Enable for unicast Storm Recovery and the unknown unica…
1.3.6.1.4.1.2356.16.1.1.2.8.12.9ScalaragentSwitchUnicastControlThresholdread-writecurrentConfigures the unicast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.
1.3.6.1.4.1.2356.16.1.1.2.8.12.10ScalaragentSwitchBroadcastControlThresholdUnitread-writecurrentConfigures the units of the threshold value to percentage of port speed or absolute packets per second.
1.3.6.1.4.1.2356.16.1.1.2.8.12.11ScalaragentSwitchMulticastControlThresholdUnitread-writecurrentConfigures the units of the threshold value to percentage of port speed or absolute packets per second.
1.3.6.1.4.1.2356.16.1.1.2.8.12.12ScalaragentSwitchUnicastControlThresholdUnitread-writecurrentConfigures the units of the threshold value to percentage of port speed or absolute packets per second.
1.3.6.1.4.1.2356.16.1.1.2.8.12.13ScalaragentSwitchBroadcastStormControlActionread-writecurrentConfigures the action to be taken when broadcast storm control rate limit is reached. none(0) - No action is taken. shutdown(1) - Diag disable the interface on…
1.3.6.1.4.1.2356.16.1.1.2.8.12.14ScalaragentSwitchMulticastStormControlActionread-writecurrentConfigures the action to be taken when multicast storm control rate limit is reached. none(0) - No action is taken. shutdown(1) - Diag disable the interface on…
1.3.6.1.4.1.2356.16.1.1.2.8.12.15ScalaragentSwitchUnicastStormControlActionread-writecurrentConfigures the action to be taken when unicast storm control rate limit is reached. none(0) - No action is taken. shutdown(1) - Diag disable the interface on s…
1.3.6.1.4.1.2356.16.1.1.2.8.12.16ScalaragentSwitchStormControlTypeaccessible-for-notifycurrentType of storm control. broadcast(1) - Broadcast storm control traffic. multicast(2) - Multicast storm control traffic. unicast(3) - Unicast traffic resulted in…
1.3.6.1.4.1.2356.16.1.1.2.8.12.17ScalaragentSwitchStormControlActionaccessible-for-notifycurrentAction to be taken when storm control rate limit is reached. shutdown(1) - Diag disable the interface on storm control. trap(2) - Generate trap on storm contro…
1.3.6.1.4.1.2356.16.1.1.2.8.17NodeagentSwitchVlanMacAssociationGroup
1.3.6.1.4.1.2356.16.1.1.2.8.17.1TableagentSwitchVlanMacAssociationTablenot-accessiblecurrentThe switch's MAC To VLAN association table
1.3.6.1.4.1.2356.16.1.1.2.8.17.1.1RowagentSwitchVlanMacAssociationEntrynot-accessiblecurrentVLAN to be assigned to untagged or priority tagged packets based on MAC address.
1.3.6.1.4.1.2356.16.1.1.2.8.17.1.1.1ColumnagentSwitchVlanMacAssociationMacAddressnot-accessiblecurrentThe Mac address
1.3.6.1.4.1.2356.16.1.1.2.8.17.1.1.2ColumnagentSwitchVlanMacAssociationVlanIdnot-accessiblecurrentThe VLAN the Mac address assigned to
1.3.6.1.4.1.2356.16.1.1.2.8.17.1.1.3ColumnagentSwitchVlanMacAssociationRowStatusread-createcurrentThe Mac to VLAN association row status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry
1.3.6.1.4.1.2356.16.1.1.2.8.18NodeagentSwitchProtectedPortConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.8.18.1TableagentSwitchProtectedPortTablenot-accessiblecurrentThe switch's protected port mapping table
1.3.6.1.4.1.2356.16.1.1.2.8.18.1.1RowagentSwitchProtectedPortEntrynot-accessiblecurrentProtected ports assigned to groups.
1.3.6.1.4.1.2356.16.1.1.2.8.18.1.1.1ColumnagentSwitchProtectedPortGroupIdnot-accessiblecurrentThe group that this port belongs to
1.3.6.1.4.1.2356.16.1.1.2.8.18.1.1.2ColumnagentSwitchProtectedPortGroupNameread-writecurrentThe name of the group
1.3.6.1.4.1.2356.16.1.1.2.8.18.1.1.3ColumnagentSwitchProtectedPortPortListread-writecurrentThe set of ports that are protected in this group
1.3.6.1.4.1.2356.16.1.1.2.8.19NodeagentSwitchVlanSubnetAssociationGroup
1.3.6.1.4.1.2356.16.1.1.2.8.19.1TableagentSwitchVlanSubnetAssociationTablenot-accessiblecurrentThe switch's Subnet To VLAN association table
1.3.6.1.4.1.2356.16.1.1.2.8.19.1.1RowagentSwitchVlanSubnetAssociationEntrynot-accessiblecurrentVLAN to be assigned to untagged or priority tagged packets based on IP address and Subnet Mask.
1.3.6.1.4.1.2356.16.1.1.2.8.19.1.1.1ColumnagentSwitchVlanSubnetAssociationIPAddressnot-accessiblecurrentThe ip address
1.3.6.1.4.1.2356.16.1.1.2.8.19.1.1.2ColumnagentSwitchVlanSubnetAssociationSubnetMasknot-accessiblecurrentThe subnet mask
1.3.6.1.4.1.2356.16.1.1.2.8.19.1.1.3ColumnagentSwitchVlanSubnetAssociationVlanIdnot-accessiblecurrentThe VLAN that the IP address and subnet mask assigned to
1.3.6.1.4.1.2356.16.1.1.2.8.19.1.1.4ColumnagentSwitchVlanSubnetAssociationRowStatusread-createcurrentThe Subnet to VLAN association row status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry
1.3.6.1.4.1.2356.16.1.1.2.8.20NodeagentSwitchSnoopingQuerierGroup
1.3.6.1.4.1.2356.16.1.1.2.8.20.1TableagentSwitchSnoopingQuerierCfgTablenot-accessiblecurrentA table of the IGMP/MLD Snooping Querier Global configuration entries.
1.3.6.1.4.1.2356.16.1.1.2.8.20.1.1RowagentSwitchSnoopingQuerierCfgEntrynot-accessiblecurrentRepresents entry for Snooping Querier Configuration.
1.3.6.1.4.1.2356.16.1.1.2.8.20.1.1.1ColumnagentSwitchSnoopingQuerierAdminModeread-writecurrentThis enables or disables Snooping Querier on the system.
1.3.6.1.4.1.2356.16.1.1.2.8.20.1.1.2ColumnagentSwitchSnoopingQuerierVersionread-writecurrentThis specifies the multicast protocol versions that are supported by the system.
1.3.6.1.4.1.2356.16.1.1.2.8.20.1.1.3ColumnagentSwitchSnoopingQuerierAddressread-writecurrentThis specifies the default source ip address to be used while generating general queries.
1.3.6.1.4.1.2356.16.1.1.2.8.20.1.1.4ColumnagentSwitchSnoopingQuerierQueryIntervalread-writecurrentThis specified the timer interval after which the system generates general queries.
1.3.6.1.4.1.2356.16.1.1.2.8.20.1.1.5ColumnagentSwitchSnoopingQuerierExpiryIntervalread-writecurrentThis specified the timer interval after which the detected other querier information is no longer valid.
1.3.6.1.4.1.2356.16.1.1.2.8.20.2TableagentSwitchSnoopingQuerierVlanTablenot-accessiblecurrentA table of the Snooping Querier Vlan configuration entries.
1.3.6.1.4.1.2356.16.1.1.2.8.20.2.1RowagentSwitchSnoopingQuerierVlanEntrynot-accessiblecurrentRepresents entry for a Snooping Querier configurable Vlan.
1.3.6.1.4.1.2356.16.1.1.2.8.20.2.1.1ColumnagentSwitchSnoopingQuerierVlanAdminModeread-writecurrentThis enables or disables Snooping Querier on a selected Vlan interface.
1.3.6.1.4.1.2356.16.1.1.2.8.20.2.1.2ColumnagentSwitchSnoopingQuerierVlanOperModeread-onlycurrentThis specifies the current state of the Snooping Querier on a selected vlan interface
1.3.6.1.4.1.2356.16.1.1.2.8.20.2.1.3ColumnagentSwitchSnoopingQuerierElectionParticipateModeread-writecurrentThis enables or disables the Snooping Querier Election Participation mode. When enabled snooping querier switch will participate in querier election up on disc…
1.3.6.1.4.1.2356.16.1.1.2.8.20.2.1.4ColumnagentSwitchSnoopingQuerierVlanAddressread-writecurrentThis specifies the default source ip address to be used while generating general queries on the specified vlan.
1.3.6.1.4.1.2356.16.1.1.2.8.20.2.1.5ColumnagentSwitchSnoopingQuerierOperVersionread-onlycurrentThis specifies the multicast protocol version that is currently being used by the snooping switch for the specified vlan while generating query messages.
1.3.6.1.4.1.2356.16.1.1.2.8.20.2.1.6ColumnagentSwitchSnoopingQuerierOperMaxResponseTimeread-onlycurrentThe amount of time in seconds a switch will wait after sending a query on the selected vlan because it did not receive a report for a particular group in the i…
1.3.6.1.4.1.2356.16.1.1.2.8.20.2.1.7ColumnagentSwitchSnoopingQuerierLastQuerierAddressread-onlycurrentThis specifies the last querier's ip address for the specified vlan. It represents the detected other multicast querier in the vlan.
1.3.6.1.4.1.2356.16.1.1.2.8.20.2.1.8ColumnagentSwitchSnoopingQuerierLastQuerierVersionread-onlycurrentThis specifies the multicast protocol version that is currently being used by the detected other multicast querier for the specified vlan. (-1) - indicates tha…
1.3.6.1.4.1.2356.16.1.1.2.8.21NodeagentDaiConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.8.21.1ScalaragentDaiSrcMacValidateread-writecurrentThis object indicates whether Sender MAC validation in the ARP packets is enabled. If this object is set to 'true', validation is enabled. If this object is se…
1.3.6.1.4.1.2356.16.1.1.2.8.21.2ScalaragentDaiDstMacValidateread-writecurrentThis object indicates whether Target MAC validation in the ARP Response packets is enabled. If this object is set to 'true', validation is enabled. If this obj…
1.3.6.1.4.1.2356.16.1.1.2.8.21.3ScalaragentDaiIPValidateread-writecurrentThis object indicates whether IP address validation in the ARP packets is enabled. If this object is set to 'true', validation is enabled. If this object is se…
1.3.6.1.4.1.2356.16.1.1.2.8.21.4TableagentDaiVlanConfigTablenot-accessiblecurrentA table provides the mechanism to control Dynamic ARP Inspection per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of t…
1.3.6.1.4.1.2356.16.1.1.2.8.21.4.1RowagentDaiVlanConfigEntrynot-accessiblecurrentA row instance contains the configuration for Dynamic ARP Inspection at each existing VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.21.4.1.1ColumnagentDaiVlanIndexnot-accessiblecurrentThis object indicates the VLAN number on which Dynamic ARP Inspection feature is configured.
1.3.6.1.4.1.2356.16.1.1.2.8.21.4.1.2ColumnagentDaiVlanDynArpInspEnableread-writecurrentThis object indicates whether Dynamic ARP Inspection is enabled in this VLAN. If this object is set to 'true', Dynamic ARP Inspection is enabled. If this objec…
1.3.6.1.4.1.2356.16.1.1.2.8.21.4.1.3ColumnagentDaiVlanLoggingEnableread-writecurrentThis object indicates whether the Dynamic ARP Inspection logging is enabled on this VlAN. If this object is set to 'true', Dynamic ARP Inspection logging is en…
1.3.6.1.4.1.2356.16.1.1.2.8.21.4.1.4ColumnagentDaiVlanArpAclNameread-writecurrentThis object indicates the ARP ACL name set for this VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.21.4.1.5ColumnagentDaiVlanArpAclStaticFlagread-writecurrentThis object indicates whether the ARP ACL set for this VLAN has static flag set. If this object is set to 'true', static flag is enabled. If this object is set…
1.3.6.1.4.1.2356.16.1.1.2.8.21.5ScalaragentDaiStatsResetread-writecurrentClear the DAI statistics on all vlans. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none(0). The val…
1.3.6.1.4.1.2356.16.1.1.2.8.21.6TableagentDaiVlanStatsTablenot-accessiblecurrentA table provides the mechanism to control Dynamic ARP Inspection per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of t…
1.3.6.1.4.1.2356.16.1.1.2.8.21.6.1RowagentDaiVlanStatsEntrynot-accessiblecurrentA row instance contains the Dynamic ARP Inspection statistics per VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.21.6.1.1ColumnagentDaiVlanStatsIndexnot-accessiblecurrentThis object indicates the VLAN number on which Dynamic ARP Inspection statistics are retrieved.
1.3.6.1.4.1.2356.16.1.1.2.8.21.6.1.2ColumnagentDaiVlanPktsForwardedread-onlycurrentNumber of valid ARP packets forwarded by DAI.
1.3.6.1.4.1.2356.16.1.1.2.8.21.6.1.3ColumnagentDaiVlanPktsDroppedread-onlycurrentNumber of invalid ARP packets dropped by DAI.
1.3.6.1.4.1.2356.16.1.1.2.8.21.6.1.4ColumnagentDaiVlanDhcpDropsread-onlycurrentNumber of ARP packets that were dropped by DAI as there is no matching DHCP Snooping binding entry found.
1.3.6.1.4.1.2356.16.1.1.2.8.21.6.1.5ColumnagentDaiVlanDhcpPermitsread-onlycurrentNumber of ARP packets that were forwarded by DAI as there is a matching DHCP Snooping binding entry found.
1.3.6.1.4.1.2356.16.1.1.2.8.21.6.1.6ColumnagentDaiVlanAclDropsread-onlycurrentNumber of ARP packets that were dropped by DAI as there is no matching ARP ACL rule found for this Vlan and the static flag is set on this vlan.
1.3.6.1.4.1.2356.16.1.1.2.8.21.6.1.7ColumnagentDaiVlanAclPermitsread-onlycurrentNumber of ARP packets that were permitted by DAI as there is a matching ARP ACL permit rule found for this Vlan.
1.3.6.1.4.1.2356.16.1.1.2.8.21.6.1.8ColumnagentDaiVlanSrcMacFailuresread-onlycurrentNumber of ARP packets that were dropped by DAI as the sender mac address in ARP packet didn't match the source mac in ethernet header.
1.3.6.1.4.1.2356.16.1.1.2.8.21.6.1.9ColumnagentDaiVlanDstMacFailuresread-onlycurrentNumber of ARP packets that were dropped by DAI as the target mac address in ARP reply packet didn't match the destination mac in ethernet header.
1.3.6.1.4.1.2356.16.1.1.2.8.21.6.1.10ColumnagentDaiVlanIpValidFailuresread-onlycurrentNumber of ARP packets that were dropped by DAI as the sender IP address in ARP packet or target IP address in ARP reply packet is invalid. Invalid addresses in…
1.3.6.1.4.1.2356.16.1.1.2.8.21.6.1.11ColumnagentDaiVlanAclDenialsread-onlycurrentNumber of ARP packets that were dropped by DAI as there is a matching ARP ACL deny rule found for this Vlan.
1.3.6.1.4.1.2356.16.1.1.2.8.21.7TableagentDaiIfConfigTablenot-accessiblecurrentA table provides the mechanism to configure the trust state for Dynamic ARP Inspection purpose at each physical interface capable of this feature.
1.3.6.1.4.1.2356.16.1.1.2.8.21.7.1RowagentDaiIfConfigEntrynot-accessiblecurrentA row instance contains the configuration for Dynamic ARP Inspection at each physical interface capable of this feature.
1.3.6.1.4.1.2356.16.1.1.2.8.21.7.1.1ColumnagentDaiIfTrustEnableread-writecurrentThis object indicates whether the interface is trusted for Dynamic ARP Inspection purpose. If this object is set to 'true', the interface is trusted. ARP packe…
1.3.6.1.4.1.2356.16.1.1.2.8.21.7.1.2ColumnagentDaiIfRateLimitread-writecurrentThis object indicates rate limit value for Dynamic ARP Inspection purpose. If the incoming rate of ARP packets exceeds the value of this object for consecutive…
1.3.6.1.4.1.2356.16.1.1.2.8.21.7.1.3ColumnagentDaiIfBurstIntervalread-writecurrentThis object indicates the burst interval value for rate limiting purpose on this interface.
1.3.6.1.4.1.2356.16.1.1.2.8.21.8ScalaragentDaiInterfaceValidateread-writecurrentThis object indicates whether Dynamic ARP Inspection checks for source interface match in the DHCP snooping binding database. If this object is set to 'true', …
1.3.6.1.4.1.2356.16.1.1.2.8.22NodeagentArpAclGroup
1.3.6.1.4.1.2356.16.1.1.2.8.22.1TableagentArpAclTablenot-accessiblecurrentA table of the ARP ACL entries
1.3.6.1.4.1.2356.16.1.1.2.8.22.1.1RowagentArpAclEntrynot-accessiblecurrentRepresents entry for an ARP ACL
1.3.6.1.4.1.2356.16.1.1.2.8.22.1.1.1ColumnagentArpAclNameread-createcurrentName of the ARP ACL, which must consist of 1 to 31 alphanumeric characters and uniquely identify this ARP ACL. This object must be set to complete a new ARP AC…
1.3.6.1.4.1.2356.16.1.1.2.8.22.1.1.2ColumnagentArpAclRowStatusread-createcurrentThe status of this conceptual row. Entries can not be deleted until all rows in agentArpAclRuleConfigTable with corresponding values of agentArpAclName have be…
1.3.6.1.4.1.2356.16.1.1.2.8.22.2TableagentArpAclRuleTablenot-accessibleobsoleteA table of the ARP ACL Rule entries. The functionality that was offered by this table is now available through the agentArpAclRuleConfigTable, although with di…
1.3.6.1.4.1.2356.16.1.1.2.8.22.2.1RowagentArpAclRuleEntrynot-accessibleobsoleteRepresents entry for a set of ARP ACL-match rules
1.3.6.1.4.1.2356.16.1.1.2.8.22.2.1.1ColumnagentArpAclRuleMatchSenderIpAddrread-createobsoleteSender IP address match value for the ARP ACL.
1.3.6.1.4.1.2356.16.1.1.2.8.22.2.1.2ColumnagentArpAclRuleMatchSenderMacAddrread-createobsoleteSender MAC address match value for the ARP ACL.
1.3.6.1.4.1.2356.16.1.1.2.8.22.2.1.3ColumnagentArpAclRuleRowStatusread-createobsoleteThe status of this conceptual row. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value …
1.3.6.1.4.1.2356.16.1.1.2.8.22.3TableagentArpAclRemarkConfigTablenot-accessiblecurrentA table for configuration of ARP ACL remarks entries. Created remarks will be associated with ARP ACL rule when the rule is created.
1.3.6.1.4.1.2356.16.1.1.2.8.22.3.1RowagentArpAclRemarkConfigEntrynot-accessiblecurrentThe row in ARP ACL remarks configuration table.
1.3.6.1.4.1.2356.16.1.1.2.8.22.3.1.1ColumnagentArpAclRemarkIndexread-createcurrentIndex of remark(not associated with a rule) instance within ARP ACL.
1.3.6.1.4.1.2356.16.1.1.2.8.22.3.1.2ColumnagentArpAclRemarkStrread-createcurrentARP ACL remark(comment) string configuration. Each remark line is limited to 100 characters. Remark may consist of characters in the range A-Z, a-z, 0-9 and sp…
1.3.6.1.4.1.2356.16.1.1.2.8.22.3.1.3ColumnagentArpAclRemarkStatusread-createcurrentStatus of this instance. active(1) - this remark is configured. createAndGo(4) - set to this value to create the remark entry. agentArpAclRemarkStr should be s…
1.3.6.1.4.1.2356.16.1.1.2.8.22.4TableagentArpAclRemarkRuleTablenot-accessibleobsoleteThis table displays remarks which are associated with ARP ACL rules. Each rule can be uniquely identified with ARP ACL name, IP and MAC addresses. Each remark …
1.3.6.1.4.1.2356.16.1.1.2.8.22.4.1RowagentArpAclRemarkRuleEntrynot-accessibleobsoleteRow of the ARP ACL rule remarks table.
1.3.6.1.4.1.2356.16.1.1.2.8.22.4.1.1ColumnagentArpAclRuleRemarkIndexread-onlyobsoleteThe index of the remark instance within ARP ACL rule.
1.3.6.1.4.1.2356.16.1.1.2.8.22.4.1.2ColumnagentArpAclRuleRemarkStrread-onlyobsoleteDisplays the remark string for the specified ARP ACL rule.
1.3.6.1.4.1.2356.16.1.1.2.8.22.4.1.3ColumnagentArpAclRuleRemarkStatusread-createobsoleteStatus of this instance. active(1) - this remark is configured. destroy(6) - set to this value to delete the remark entry.
1.3.6.1.4.1.2356.16.1.1.2.8.22.5TableagentArpAclRuleConfigTablenot-accessiblecurrentA table of ARP ACL Rule entries
1.3.6.1.4.1.2356.16.1.1.2.8.22.5.1RowagentArpAclRuleConfigEntrynot-accessiblecurrentRepresents entry for a set of ARP ACL match criteria
1.3.6.1.4.1.2356.16.1.1.2.8.22.5.1.1ColumnagentArpAclRuleConfigIndexnot-accessiblecurrentSequence number of the rule within the ARP ACL. A value of 0 is special in that it is used to automatically assign the next higher available rule sequence numb…
1.3.6.1.4.1.2356.16.1.1.2.8.22.5.1.2ColumnagentArpAclRuleConfigSenderIpAddrread-createcurrentSender IP address match value for the ARP ACL. A value of 0.0.0.0 indicates 'any-ipv4 address' matching.
1.3.6.1.4.1.2356.16.1.1.2.8.22.5.1.3ColumnagentArpAclRuleConfigSenderMacAddrread-createcurrentSender MAC address match value for the ARP ACL. A value of 00:00:00:00:00:00 indicates 'any-mac' matching.
1.3.6.1.4.1.2356.16.1.1.2.8.22.5.1.4ColumnagentArpAclRuleConfigActionread-createcurrentAction to be taken when this rule is hit: permit(1) - ARP packet matching this rule is forwarded deny(2) - ARP packet matching this rule is dropped
1.3.6.1.4.1.2356.16.1.1.2.8.22.5.1.5ColumnagentArpAclRuleConfigStatusread-createcurrentThe status of this conceptual row. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value …
1.3.6.1.4.1.2356.16.1.1.2.8.22.6TableagentArpAclRemarkRuleConfigTablenot-accessiblecurrentThis table displays remarks which are associated with ARP ACL rules. Each ARP ACL rule is uniquely identified with ARP ACL name and ARP ACL rule sequence numbe…
1.3.6.1.4.1.2356.16.1.1.2.8.22.6.1RowagentArpAclRemarkRuleConfigEntrynot-accessiblecurrentRow in the ARP ACL rule remarks table.
1.3.6.1.4.1.2356.16.1.1.2.8.22.6.1.1ColumnagentArpAclRemarkRuleConfigIndexnot-accessiblecurrentThe index of this remark instance within a ARP ACL rule.
1.3.6.1.4.1.2356.16.1.1.2.8.22.6.1.2ColumnagentArpAclRemarkRuleConfigStrread-onlycurrentDisplays the remark string for the specified ARP ACL rule.
1.3.6.1.4.1.2356.16.1.1.2.8.22.6.1.3ColumnagentArpAclRemarkRuleConfigStatusread-createcurrentStatus of this instance. active(1) - this remark is configured. destroy(6) - delete the remark entry.
1.3.6.1.4.1.2356.16.1.1.2.8.23NodeagentDhcpSnoopingConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.8.23.1ScalaragentDhcpSnoopingAdminModeread-writecurrentThis object indicates whether DHCP Snooping is enabled globally. If this object is set to 'true',admin mode is enabled globally. If this object is set to 'fals…
1.3.6.1.4.1.2356.16.1.1.2.8.23.2ScalaragentDhcpSnoopingVerifyMacread-writecurrentThis object indicates whether source Mac address in the received DHCP Message needs to be verified or not. If this object is set to 'true',verifyMac is enabled…
1.3.6.1.4.1.2356.16.1.1.2.8.23.3TableagentDhcpSnoopingVlanConfigTablenot-accessiblecurrentA table provides the mechanism to control DHCP SNOOPING per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table…
1.3.6.1.4.1.2356.16.1.1.2.8.23.3.1RowagentDhcpSnoopingVlanConfigEntrynot-accessiblecurrentA row instance contains the configuration for DHCP SNOOPING at each existing VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.23.3.1.1ColumnagentDhcpSnoopingVlanIndexnot-accessiblecurrentThis object indicates the VLAN number on which DHCP SNOOPING Inspection feature is configured.
1.3.6.1.4.1.2356.16.1.1.2.8.23.3.1.2ColumnagentDhcpSnoopingVlanEnableread-writecurrentThis object indicates whether DHCP SNOOPING is enabled in this VLAN. If this object is set to 'true', DHCP SNOOPING is enabled. If this object is set to 'false…
1.3.6.1.4.1.2356.16.1.1.2.8.23.4TableagentDhcpSnoopingIfConfigTablenot-accessiblecurrentA table provides the mechanism to configure the trust state for DHCP snooping purpose at each physical interface capable of this feature.
1.3.6.1.4.1.2356.16.1.1.2.8.23.4.1RowagentDhcpSnoopingIfConfigEntrynot-accessiblecurrentA row instance contains the configuration for DHCP snooping at each physical interface capable of this feature.
1.3.6.1.4.1.2356.16.1.1.2.8.23.4.1.1ColumnagentDhcpSnoopingIfTrustEnableread-writecurrentThis object indicates whether the interface is trusted for DHCP snooping purpose.
1.3.6.1.4.1.2356.16.1.1.2.8.23.4.1.2ColumnagentDhcpSnoopingIfLogEnableread-writecurrentThis object indicates whether the Logging needs on DHCP snooping validations or not
1.3.6.1.4.1.2356.16.1.1.2.8.23.4.1.3ColumnagentDhcpSnoopingIfRateLimitread-writecurrentThis object indicates rate limit value for DHCP Snooping purpose. If the incoming rate of DHCP packets exceeds the value of this object for consecutively burst…
1.3.6.1.4.1.2356.16.1.1.2.8.23.4.1.4ColumnagentDhcpSnoopingIfBurstIntervalread-writecurrentThis object indicates the burst interval value for rate limiting purpose on this interface. Value of -1 indicates that there is no burst interval.
1.3.6.1.4.1.2356.16.1.1.2.8.23.5TableagentIpsgIfConfigTablenot-accessiblecurrentA table provides the mechanism to configure the IPSG at each physical interface capable of this feature.
1.3.6.1.4.1.2356.16.1.1.2.8.23.5.1RowagentIpsgIfConfigEntrynot-accessiblecurrentA row instance contains the configuration for IPSG at each physical interface capable of this feature.
1.3.6.1.4.1.2356.16.1.1.2.8.23.5.1.1ColumnagentIpsgIfVerifySourceread-writecurrentThis object indicates whether IP packets received on this interface are filtered based on whether IP Source Guard considers the source IP address to be a valid…
1.3.6.1.4.1.2356.16.1.1.2.8.23.5.1.2ColumnagentIpsgIfPortSecurityread-writecurrentThis object indicates whether IP packets received on this interface are filtered based on whether IP Source Guard considers the source MAC address to be a vali…
1.3.6.1.4.1.2356.16.1.1.2.8.23.6ScalaragentDhcpSnoopingStatsResetread-writecurrentClear the DHCP snooping statistics on all ports. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none(0…
1.3.6.1.4.1.2356.16.1.1.2.8.23.7TableagentDhcpSnoopingStatsTablenot-accessiblecurrentA table provides the mechanism for statics of DHCP snooping.
1.3.6.1.4.1.2356.16.1.1.2.8.23.7.1RowagentDhcpSnoopingStatsEntrynot-accessiblecurrentA row instance contains the DHCP snooping statistics per VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.23.7.1.1ColumnagentDhcpSnoopingMacVerifyFailuresread-onlycurrentThis object indicates the number of failure verifications of client mac address with source mac address
1.3.6.1.4.1.2356.16.1.1.2.8.23.7.1.2ColumnagentDhcpSnoopingInvalidClientMessagesread-onlycurrentThis object indicates the number of invalid DHCP release, request and decline messages
1.3.6.1.4.1.2356.16.1.1.2.8.23.7.1.3ColumnagentDhcpSnoopingInvalidServerMessagesread-onlycurrentThis object indicates the number of invalid DHCP server mesaages
1.3.6.1.4.1.2356.16.1.1.2.8.23.8TableagentStaticIpsgBindingTablenot-accessiblecurrentA table of the IPSG static entries
1.3.6.1.4.1.2356.16.1.1.2.8.23.8.1RowagentStaticIpsgBindingEntrynot-accessiblecurrentRepresents a binding in IPSG table
1.3.6.1.4.1.2356.16.1.1.2.8.23.8.1.1ColumnagentStaticIpsgBindingIfIndexread-createcurrentInterface on which this IPSG binding is going to be added.
1.3.6.1.4.1.2356.16.1.1.2.8.23.8.1.2ColumnagentStaticIpsgBindingVlanIdread-createcurrentVLAN to whcig this IPSG binding is going to be added.
1.3.6.1.4.1.2356.16.1.1.2.8.23.8.1.3ColumnagentStaticIpsgBindingIpAddrread-createcurrentIP address match value for the IPSG Binding.
1.3.6.1.4.1.2356.16.1.1.2.8.23.8.1.4ColumnagentStaticIpsgBindingMacAddrread-createcurrentMAC address match value for the IPSG Binding.
1.3.6.1.4.1.2356.16.1.1.2.8.23.8.1.5ColumnagentStaticIpsgBindingRowStatusread-createcurrentThe status of this conceptual row. active(1) - this IPSG Binding is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this va…
1.3.6.1.4.1.2356.16.1.1.2.8.23.9TableagentDynamicIpsgBindingTablenot-accessiblecurrentA table of the IPSG dynamic entries
1.3.6.1.4.1.2356.16.1.1.2.8.23.9.1RowagentDynamicIpsgBindingEntrynot-accessiblecurrentRepresents a binding in IPSG table
1.3.6.1.4.1.2356.16.1.1.2.8.23.9.1.1ColumnagentDynamicIpsgBindingIfIndexread-onlycurrentInterface on which this IPSG binding is added.
1.3.6.1.4.1.2356.16.1.1.2.8.23.9.1.2ColumnagentDynamicIpsgBindingVlanIdread-onlycurrentVLAN to which this IPSG binding is going to be added.
1.3.6.1.4.1.2356.16.1.1.2.8.23.9.1.3ColumnagentDynamicIpsgBindingIpAddrread-onlycurrentSender IP address match value for the IPSG Binding.
1.3.6.1.4.1.2356.16.1.1.2.8.23.9.1.4ColumnagentDynamicIpsgBindingMacAddrread-onlycurrentMAC address match value for the IPSG Binding.
1.3.6.1.4.1.2356.16.1.1.2.8.23.10TableagentStaticDsBindingTablenot-accessiblecurrentA table of the DHCP SNOOPING static entries
1.3.6.1.4.1.2356.16.1.1.2.8.23.10.1RowagentStaticDsBindingEntrynot-accessiblecurrentRepresents a binding in DHCP SNOOPING table
1.3.6.1.4.1.2356.16.1.1.2.8.23.10.1.1ColumnagentStaticDsBindingIfIndexread-createcurrentInterface on which this DHCP SNOOPING binding is going to be added.
1.3.6.1.4.1.2356.16.1.1.2.8.23.10.1.2ColumnagentStaticDsBindingVlanIdread-createcurrentVLAN to which this DHCP SNOOPING binding is going to be added.
1.3.6.1.4.1.2356.16.1.1.2.8.23.10.1.3ColumnagentStaticDsBindingMacAddrread-createcurrentMAC address match value for the DHCP SNOOPING Binding.
1.3.6.1.4.1.2356.16.1.1.2.8.23.10.1.4ColumnagentStaticDsBindingIpAddrread-createcurrentIP address match value for the DHCP SNOOPING Binding.
1.3.6.1.4.1.2356.16.1.1.2.8.23.10.1.5ColumnagentStaticDsBindingRowStatusread-createcurrentThe status of this conceptual row. active(1) - this DHCP SNOOPING Binding is active createAndGo(4) - set to this value to create an instance destroy(6) - set t…
1.3.6.1.4.1.2356.16.1.1.2.8.23.11TableagentDynamicDsBindingTablenot-accessiblecurrentA table of the DHCP SNOOPING Dynamic entries
1.3.6.1.4.1.2356.16.1.1.2.8.23.11.1RowagentDynamicDsBindingEntrynot-accessiblecurrentRepresents a binding in DHCP SNOOPING table
1.3.6.1.4.1.2356.16.1.1.2.8.23.11.1.1ColumnagentDynamicDsBindingIfIndexread-onlycurrentInterface on which this DHCP SNOOPING binding is going to be added.
1.3.6.1.4.1.2356.16.1.1.2.8.23.11.1.2ColumnagentDynamicDsBindingVlanIdread-onlycurrentVLAN to whcig this DHCP SNOOPING binding is going to be added.
1.3.6.1.4.1.2356.16.1.1.2.8.23.11.1.3ColumnagentDynamicDsBindingMacAddrread-onlycurrentMAC address match value for the DHCP SNOOPING Binding.
1.3.6.1.4.1.2356.16.1.1.2.8.23.11.1.4ColumnagentDynamicDsBindingIpAddrread-onlycurrentIP address match value for the DHCP SNOOPING Binding.
1.3.6.1.4.1.2356.16.1.1.2.8.23.11.1.5ColumnagentDynamicDsBindingLeaseRemainingTimeread-onlycurrentThis specifies the period for which the DHCP SNOOPING Binding is valid.
1.3.6.1.4.1.2356.16.1.1.2.8.23.12ScalaragentDhcpSnoopingRemoteFileNameread-writecurrentThis object indicates the file name on the remote machine to save the DHCP Snooping bindings. This will be set only when we have a valid remote IP.
1.3.6.1.4.1.2356.16.1.1.2.8.23.13ScalaragentDhcpSnoopingRemoteIpAddrread-writecurrentThis object indicates the IP address of the remote machine to save the DHCP Snooping bindings. This will be set only when we have a valid file name.
1.3.6.1.4.1.2356.16.1.1.2.8.23.14ScalaragentDhcpSnoopingStoreIntervalread-writecurrentThis object indicates the perodic time interval to save the DHCP Snooping bindings.
1.3.6.1.4.1.2356.16.1.1.2.8.24NodeagentDhcpL2RelayConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.8.24.1ScalaragentDhcpL2RelayAdminModeread-writecurrentThis object indicates whether DHCP L2 Relay is enabled globally. If this object is set to 'true',admin mode is enabled globally. If this object is set to 'fals…
1.3.6.1.4.1.2356.16.1.1.2.8.24.2TableagentDhcpL2RelayIfConfigTablenot-accessiblecurrentA table provides the mechanism to enable/disable and configure the trust state for DHCP L2Relay purpose at each physical interface capable of this feature.
1.3.6.1.4.1.2356.16.1.1.2.8.24.2.1RowagentDhcpL2RelayIfConfigEntrynot-accessiblecurrentA row instance contains the configuration for DHCP L2 Relay at each physical interface capable of this feature.
1.3.6.1.4.1.2356.16.1.1.2.8.24.2.1.1ColumnagentDhcpL2RelayIfEnableread-writecurrentThis object indicates whether the DHCP L2Relay is enabled or not
1.3.6.1.4.1.2356.16.1.1.2.8.24.2.1.2ColumnagentDhcpL2RelayIfTrustEnableread-writecurrentThis object indicates whether the interface is trusted for DHCP L2 Relay purpose.
1.3.6.1.4.1.2356.16.1.1.2.8.24.3TableagentDhcpL2RelayVlanConfigTablenot-accessiblecurrentA table provides the mechanism to control DHCP L2 Relay per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table…
1.3.6.1.4.1.2356.16.1.1.2.8.24.3.1RowagentDhcpL2RelayVlanConfigEntrynot-accessiblecurrentA row instance contains the configuration for DHCP L2 Relay at each existing VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.24.3.1.1ColumnagentDhcpL2RelayVlanIndexnot-accessiblecurrentThis object indicates the VLAN number on which DHCP L2 Relay feature is configured.
1.3.6.1.4.1.2356.16.1.1.2.8.24.3.1.2ColumnagentDhcpL2RelayVlanEnableread-writecurrentThis object indicates whether DHCP L2 Relay is enabled in this VLAN. If this object is set to 'true', DHCP L2 Relay is enabled. If this object is set to 'false…
1.3.6.1.4.1.2356.16.1.1.2.8.24.3.1.3ColumnagentDhcpL2RelayCircuitIdVlanEnableread-writecurrentThis object indicates whether DHCP CircuitId is enabled for L2 relaying in this VLAN. If this object is set to 'true', DHCP CircuitId is enabled. If this objec…
1.3.6.1.4.1.2356.16.1.1.2.8.24.3.1.4ColumnagentDhcpL2RelayRemoteIdVlanEnableread-writecurrentWhen this object is set with a non-empty string, DHCP RemoteId is enabled for L2 relaying in this VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.24.6ScalaragentDhcpL2RelayStatsResetread-writecurrentClear the DHCP L2Relay statistics on all ports. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none(0)…
1.3.6.1.4.1.2356.16.1.1.2.8.24.7TableagentDhcpL2RelayStatsTablenot-accessiblecurrentA table provides the mechanism for statics of DHCP L2 Relay.
1.3.6.1.4.1.2356.16.1.1.2.8.24.7.1RowagentDhcpL2RelayStatsEntrynot-accessiblecurrentA row instance contains the DHCP L2Relay statistics per interface.
1.3.6.1.4.1.2356.16.1.1.2.8.24.7.1.1ColumnagentDhcpL2RelayUntrustedSrvrMsgsWithOptn82read-onlycurrentThis object indicates the number of DHCP server messages received with Option-82 field on the untrusted interface.
1.3.6.1.4.1.2356.16.1.1.2.8.24.7.1.2ColumnagentDhcpL2RelayUntrustedClntMsgsWithOptn82read-onlycurrentThis object indicates the number of DHCP client messages received with Option-82 field on the untrusted interface.
1.3.6.1.4.1.2356.16.1.1.2.8.24.7.1.3ColumnagentDhcpL2RelayTrustedSrvrMsgsWithoutOptn82read-onlycurrentThis object indicates the number of DHCP server messages received without Option-82 field on the trusted interface.
1.3.6.1.4.1.2356.16.1.1.2.8.24.7.1.4ColumnagentDhcpL2RelayTrustedClntMsgsWithoutOptn82read-onlycurrentThis object indicates the number of DHCP client messages received without Option-82 field on the trusted interface.
1.3.6.1.4.1.2356.16.1.1.2.8.25NodeagentSwitchVoiceVLANGroup
1.3.6.1.4.1.2356.16.1.1.2.8.25.1ScalaragentSwitchVoiceVLANAdminModeread-writecurrentThis enables or disables Voice VLAN on the system.
1.3.6.1.4.1.2356.16.1.1.2.8.25.2TableagentSwitchVoiceVlanDeviceTablenot-accessiblecurrentA table of the Voice Vlan device entries.
1.3.6.1.4.1.2356.16.1.1.2.8.25.2.1RowagentSwitchVoiceVlanDeviceEntrynot-accessiblecurrentRepresents entry for a Voice Device on the interface.
1.3.6.1.4.1.2356.16.1.1.2.8.25.2.1.1ColumnagentSwitchVoiceVlanInterfaceNumread-onlycurrentThe interface number of this interface.
1.3.6.1.4.1.2356.16.1.1.2.8.25.2.1.2ColumnagentSwitchVoiceVlanDeviceMacAddressread-onlycurrentThe Voice Device Mac address
1.3.6.1.4.1.2356.16.1.1.2.8.26NodeagentSwitchAddressConflictGroup
1.3.6.1.4.1.2356.16.1.1.2.8.26.1ScalaragentSwitchAddressConflictDetectionStatusread-onlycurrentDisplays if an address conflict was detected on the switch since the last reset of the status or the last conflict detection run. Set to 'true' if detected, 'f…
1.3.6.1.4.1.2356.16.1.1.2.8.26.2ScalaragentSwitchAddressConflictDetectionStatusResetread-writecurrentClear the last address conflict detection status in the switch. A value of reset(1) is used to reset the status. A read on this object always returns the value…
1.3.6.1.4.1.2356.16.1.1.2.8.26.3ScalaragentSwitchLastConflictingIPAddrread-onlycurrentThe reported conflicting IP address on the switch since the last reset of the conflict detection status or the last conflict detection run.
1.3.6.1.4.1.2356.16.1.1.2.8.26.4ScalaragentSwitchLastConflictingMacAddrread-onlycurrentThe MAC address of the host corresponding to the reported conflicting IP address on the switch since the last reset of the conflict detection status or the las…
1.3.6.1.4.1.2356.16.1.1.2.8.26.5ScalaragentSwitchLastConflictReportedTimeread-onlycurrentTime since the last address conflict was detected. It is displayed in days, hours, minutes and seconds. It is set to a valid value only when the conflict detec…
1.3.6.1.4.1.2356.16.1.1.2.8.26.6ScalaragentSwitchConflictIPAddraccessible-for-notifycurrentThe IP address on the switch reported to have a conflict with another host's IP address.
1.3.6.1.4.1.2356.16.1.1.2.8.26.7ScalaragentSwitchConflictMacAddraccessible-for-notifycurrentThe MAC address of the host that has an IP address conflicting with the IP address on the switch.
1.3.6.1.4.1.2356.16.1.1.2.8.26.8ScalaragentSwitchAddressConflictDetectionRunread-writecurrentTrigger the action to run the active address conflict detection. A value of run(1) is used to issue the action command. A read on this object always returns th…
1.3.6.1.4.1.2356.16.1.1.2.8.27NodeagentSdmPreferConfigEntry
1.3.6.1.4.1.2356.16.1.1.2.8.27.1ScalaragentSdmPreferCurrentTemplateread-onlycurrentDisplays the current active SDM Template.
1.3.6.1.4.1.2356.16.1.1.2.8.27.2ScalaragentSdmPreferNextTemplateread-writecurrentConfigures the next active template. It will be active only after the next reboot. To revert to the default template after the next reboot, use the option defa…
1.3.6.1.4.1.2356.16.1.1.2.8.28NodeagentSdmTemplateSummaryTable
1.3.6.1.4.1.2356.16.1.1.2.8.28.1TableagentSdmTemplateTablenot-accessiblecurrentDisplays Switch Database Management Template Information.
1.3.6.1.4.1.2356.16.1.1.2.8.28.1.1RowagentSdmTemplateEntrynot-accessiblecurrentInformation about a SDM Template table entry.
1.3.6.1.4.1.2356.16.1.1.2.8.28.1.1.1ColumnagentSdmTemplateIdnot-accessiblecurrentThe SDM Template type this instance is associated with.
1.3.6.1.4.1.2356.16.1.1.2.8.28.1.1.2ColumnagentArpEntriesread-onlycurrentThe maximum number of entries in the IPv4 Address Resolution Protocol (ARP) cache for routing interfaces.
1.3.6.1.4.1.2356.16.1.1.2.8.28.1.1.3ColumnagentIPv4UnicastRoutesread-onlycurrentThe maximum number of IPv4 unicast forwarding table entries.
1.3.6.1.4.1.2356.16.1.1.2.8.28.1.1.4ColumnagentIPv6NdpEntriesread-onlycurrentThe maximum number of IPv6 Neighbor Discovery Protocol (NDP) cache entries.
1.3.6.1.4.1.2356.16.1.1.2.8.28.1.1.5ColumnagentIPv6UnicastRoutesread-onlycurrentThe maximum number of IPv6 unicast forwarding table entries.
1.3.6.1.4.1.2356.16.1.1.2.8.28.1.1.6ColumnagentEcmpNextHopsread-onlycurrentThe maximum number of Equal cost next hops that can be installed in the IPv4 and IPv6 unicast forwarding tables.
1.3.6.1.4.1.2356.16.1.1.2.8.28.1.1.7ColumnagentIPv4MulticastRoutesread-onlycurrentThe maximum number of IPv4 multicast forwarding table entries.
1.3.6.1.4.1.2356.16.1.1.2.8.28.1.1.8ColumnagentIPv6MulticastRoutesread-onlycurrentThe maximum number of IPv6 multicast forwarding table entries.
1.3.6.1.4.1.2356.16.1.1.2.8.29NodeagentSwitchCutThroughGroup
1.3.6.1.4.1.2356.16.1.1.2.8.29.1ScalaragentSwitchCutThroughConfigModeread-writecurrentMode changes are effective from the next reload of the Switch. The cut-through feature may not be present on all switches. Use - agentSwitchCutThroughRunningMo…
1.3.6.1.4.1.2356.16.1.1.2.8.29.2ScalaragentSwitchCutThroughRunningModeStatusread-onlycurrentThis gives the current running mode of the cut-through feature on switch. Note that Mode changes are effective from the next reload of the Switch. so running m…
1.3.6.1.4.1.2356.16.1.1.2.8.29.3ScalaragentSwitchCutThroughConfiguredModeStatusread-onlycurrentThis gives the configured mode of cut-through feature on switch. Note that Mode changes are effective from the next reload of the Switch. so running mode may b…
1.3.6.1.4.1.2356.16.1.1.2.8.30NodeagentPortTypeGroup
1.3.6.1.4.1.2356.16.1.1.2.8.30.1IdentityagentPortType40GigBaseXobsoleteObsoleted by dot3MauType40GbaseCR4
1.3.6.1.4.1.2356.16.1.1.2.8.30.2IdentityagentPortType20GigBaseXcurrentX PCS/PMA, unknown PMD. MAU MIB augmentation
1.3.6.1.4.1.2356.16.1.1.2.8.30.3IdentityagentPortType25GigBaseXcurrentX PCS/PMA, unknown PMD. MAU MIB augmentation
1.3.6.1.4.1.2356.16.1.1.2.8.30.4IdentityagentPortType2pt5GigBaseXcurrentX PCS/PMA, unknown PMD. MAU MIB augmentation
1.3.6.1.4.1.2356.16.1.1.2.8.30.5IdentityagentPortType5GigBaseXcurrentX PCS/PMA, unknown PMD. MAU MIB augmentation
1.3.6.1.4.1.2356.16.1.1.2.8.30.100IdentityagentPortType50GigBaseXcurrentX PCS/PMA, unknown PMD. MAU MIB augmentation
1.3.6.1.4.1.2356.16.1.1.2.8.31NodeagentPrivateVlanGroup
1.3.6.1.4.1.2356.16.1.1.2.8.31.1TableagentPrivateVlanTablenot-accessibledeprecated
1.3.6.1.4.1.2356.16.1.1.2.8.31.1.1RowagentPrivateVlanEntrynot-accessibledeprecated
1.3.6.1.4.1.2356.16.1.1.2.8.31.1.1.1ColumnagentPrivateVlanTyperead-writedeprecatedEnables vlan for Private Vlan and configures private vlan type.
1.3.6.1.4.1.2356.16.1.1.2.8.31.1.1.2ColumnagentPrivateVlanAssociateread-writedeprecatedThis field lists all the VlanIDs which are associated with the selected vlan. If the selected vlan type is not primary(1), a zero-length bitmask is returned.
1.3.6.1.4.1.2356.16.1.1.2.8.31.2TableagentPrivateVlanIntfAssocTablenot-accessibledeprecated
1.3.6.1.4.1.2356.16.1.1.2.8.31.2.1RowagentPrivateVlanIntfAssocEntrynot-accessibledeprecated
1.3.6.1.4.1.2356.16.1.1.2.8.31.2.1.1ColumnagentPrivateVlanIntfAssocHostPrimaryread-writedeprecatedConfigures the primary host vlan association with the interface. This must be configured along with agentPrivateVlanIntfAssocHostSecondary before the associati…
1.3.6.1.4.1.2356.16.1.1.2.8.31.2.1.2ColumnagentPrivateVlanIntfAssocHostSecondaryread-writedeprecatedConfigures the secondary host vlan association with the interface. This must be configured along with agentPrivateVlanIntfAssocHostPrimary before the associati…
1.3.6.1.4.1.2356.16.1.1.2.8.31.2.1.3ColumnagentPrivateVlanIntfAssocPromiscuousPrimaryread-writedeprecatedConfigures the primary promiscuous vlan association with the interface. This must be configured along with agentPrivateVlanIntfAssocPromiscuousSecondary before…
1.3.6.1.4.1.2356.16.1.1.2.8.31.2.1.4ColumnagentPrivateVlanIntfAssocPromiscuousSecondaryread-writedeprecatedConfigures the secondary promiscuous vlan association with the interface. This must be configured along with agentPrivateVlanIntfAssocPromiscuousPrimary before…
1.3.6.1.4.1.2356.16.1.1.2.8.31.2.1.5ColumnagentPrivateVlanIntfAssocOperationalread-onlydeprecatedShows the operational private vlans associated with the interface.
1.3.6.1.4.1.2356.16.1.1.2.8.31.2.1.6ColumnagentPrivateVlanIntfAssocPromiscuousTrunkNativeVlanread-writedeprecatedConfigures the native VLAN on promiscuous or isolated trunk port. Untagged packets received on this trunk port are assigned this VLAN id. If native VLAN is not…
1.3.6.1.4.1.2356.16.1.1.2.8.31.2.1.7ColumnagentPrivateVlanIntfAssocPromiscuousTrunkAllowedVlanread-writedeprecatedConfigures the list of allowed normal VLANs and primary VLANs on promiscuous trunk port and allowed VLANs and secondary VLANs on isolated trunk port.
1.3.6.1.4.1.2356.16.1.1.2.8.31.2.1.8ColumnagentPrivateVlanIntfAssocPromiscuousTrunkPrimaryread-writedeprecatedConfigures the primary VLAN with which the packets are tagged. This must be configured along with agentPrivateVlanIntfAssocPromiscuousTrunkSecondary before the…
1.3.6.1.4.1.2356.16.1.1.2.8.31.2.1.9ColumnagentPrivateVlanIntfAssocPromiscuousTrunkSecondaryread-writedeprecatedConfigures the list of secondary VLANs associated with the primary VLAN configured with agentPrivateVlanIntfAssocPromiscuousTrunkPrimary before the association…
1.3.6.1.4.1.2356.16.1.1.2.8.31.2.1.10ColumnagentPrivateVlanIntfAssocIsolatedTrunkPrimaryread-writedeprecatedConfigures the primary VLAN with which the packets are tagged. This must be configured along with agentPrivateVlanIntfAssocIsolatedTrunkSecondary before the as…
1.3.6.1.4.1.2356.16.1.1.2.8.31.2.1.11ColumnagentPrivateVlanIntfAssocIsolatedTrunkSecondaryread-writedeprecatedConfigures the secondary isolated VLAN associated with the primary VLAN configured with agentPrivateVlanIntfAssocIsolatedTrunkPrimary before the association is…
1.3.6.1.4.1.2356.16.1.1.2.8.33NodeagentDhcpv6SnoopingConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.8.33.1ScalaragentDhcpv6SnoopingAdminModeread-writecurrentThis object indicates whether DHCPv6 SNOOPING is enabled globally. If this object is set to 'true',admin mode is enabled globally. If this object is set to 'fa…
1.3.6.1.4.1.2356.16.1.1.2.8.33.2ScalaragentDhcpv6SnoopingVerifyMacread-writecurrentThis object indicates whether source Mac address in the received dhcpv6 Message needs to be verified or not. If this object is set to 'true',verifyMac is enabl…
1.3.6.1.4.1.2356.16.1.1.2.8.33.3TableagentDhcpv6SnoopingVlanConfigTablenot-accessiblecurrentA table provides the mechanism to control DHCPv6 SNOOPING per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this tab…
1.3.6.1.4.1.2356.16.1.1.2.8.33.3.1RowagentDhcpv6SnoopingVlanConfigEntrynot-accessiblecurrentA row instance contains the configuration for dhcpv6 SNOOPING at each existing VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.33.3.1.1ColumnagentDhcpv6SnoopingVlanIndexnot-accessiblecurrentThis object indicates the VLAN number on which DHCPv6 SNOOPING Inspection feature is configured.
1.3.6.1.4.1.2356.16.1.1.2.8.33.3.1.2ColumnagentDhcpv6SnoopingVlanEnableread-writecurrentThis object indicates whether DHCPv6 SNOOPING is enabled in this VLAN. If this object is set to 'true', DHCPv6 SNOOPING is enabled. If this object is set to 'f…
1.3.6.1.4.1.2356.16.1.1.2.8.33.4TableagentDhcpv6SnoopingIfConfigTablenot-accessiblecurrentA table provides the mechanism to configure the trust state for DHCPv6 SNOOPING purpose at each physical interface capable of this feature.
1.3.6.1.4.1.2356.16.1.1.2.8.33.4.1RowagentDhcpv6SnoopingIfConfigEntrynot-accessiblecurrentA row instance contains the configuration for DHCPv6 SNOOPING at each physical interface capable of this feature.
1.3.6.1.4.1.2356.16.1.1.2.8.33.4.1.1ColumnagentDhcpv6SnoopingIfTrustEnableread-writecurrentThis object indicates whether the interface is trusted for DHCPv6 SNOOPING purpose.
1.3.6.1.4.1.2356.16.1.1.2.8.33.4.1.2ColumnagentDhcpv6SnoopingIfLogEnableread-writecurrentThis object indicates whether the Logging needs on DHCPv6 SNOOPING validations or not
1.3.6.1.4.1.2356.16.1.1.2.8.33.4.1.3ColumnagentDhcpv6SnoopingIfRateLimitread-writecurrentThis object indicates rate limit value for dhcpv6 Snooping purpose. If the incoming rate of dhcpv6 packets exceeds the value of this object for consecutively b…
1.3.6.1.4.1.2356.16.1.1.2.8.33.4.1.4ColumnagentDhcpv6SnoopingIfBurstIntervalread-writecurrentThis object indicates the burst interval value for rate limiting purpose on this interface. Value of -1 indicates that there is no burst interval.
1.3.6.1.4.1.2356.16.1.1.2.8.33.5TableagentIpv6sgIfConfigTablenot-accessiblecurrentA table provides the mechanism to configure the IPSG at each physical interface capable of this feature.
1.3.6.1.4.1.2356.16.1.1.2.8.33.5.1RowagentIpv6sgIfConfigEntrynot-accessiblecurrentA row instance contains the configuration for IPSG at each physical interface capable of this feature.
1.3.6.1.4.1.2356.16.1.1.2.8.33.5.1.1ColumnagentIpv6sgIfVerifySourceread-writecurrentThis object indicates whether the interface is enabled for IPv6SG to forward the data based up on source Ip address
1.3.6.1.4.1.2356.16.1.1.2.8.33.5.1.2ColumnagentIpv6sgIfPortSecurityread-writecurrentThis object indicates whether the interface is enabled for IPv6SG to forward the data based up on source mac address in fdb table
1.3.6.1.4.1.2356.16.1.1.2.8.33.6ScalaragentDhcpv6SnoopingStatsResetread-writecurrentClear the DHCPv6 SNOOPING statistics on all ports. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none…
1.3.6.1.4.1.2356.16.1.1.2.8.33.7TableagentDhcpv6SnoopingStatsTablenot-accessiblecurrentA table provides the mechanism for statics of DHCPv6 SNOOPING.
1.3.6.1.4.1.2356.16.1.1.2.8.33.7.1RowagentDhcpv6SnoopingStatsEntrynot-accessiblecurrentA row instance contains the DHCPv6 SNOOPING statistics per VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.33.7.1.1ColumnagentDhcpv6SnoopingMacVerifyFailuresread-onlycurrentThis object indicates the number of failure verifications of client mac address with source mac address
1.3.6.1.4.1.2356.16.1.1.2.8.33.7.1.2ColumnagentDhcpv6SnoopingInvalidClientMessagesread-onlycurrentThis object indicates the number of invalid dhcpv6 release, request and decline messages
1.3.6.1.4.1.2356.16.1.1.2.8.33.7.1.3ColumnagentDhcpv6SnoopingInvalidServerMessagesread-onlycurrentThis object indicates the number of invalid dhcpv6 server mesaages
1.3.6.1.4.1.2356.16.1.1.2.8.33.8TableagentStaticIpv6sgBindingTablenot-accessiblecurrentA table of the IPv6SG static entries
1.3.6.1.4.1.2356.16.1.1.2.8.33.8.1RowagentStaticIpv6sgBindingEntrynot-accessiblecurrentRepresents a binding in IPv6SG table
1.3.6.1.4.1.2356.16.1.1.2.8.33.8.1.1ColumnagentStaticIpv6sgBindingIfIndexread-createcurrentInterface on which this IPv6SG binding is going to be added.
1.3.6.1.4.1.2356.16.1.1.2.8.33.8.1.2ColumnagentStaticIpv6sgBindingVlanIdread-createcurrentVLAN to which this IPv6SG binding is going to be added.
1.3.6.1.4.1.2356.16.1.1.2.8.33.8.1.3ColumnagentStaticIpv6sgBindingIpAddrread-createcurrentIPv6 address match value for the IPv6SG binding.
1.3.6.1.4.1.2356.16.1.1.2.8.33.8.1.4ColumnagentStaticIpv6sgBindingMacAddrread-createcurrentMAC address match value for the IPv6SG Binding.
1.3.6.1.4.1.2356.16.1.1.2.8.33.8.1.5ColumnagentStaticIpv6sgBindingRowStatusread-createcurrentThe status of this conceptual row. active(1) - this IPv6SG Binding is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this …
1.3.6.1.4.1.2356.16.1.1.2.8.33.9TableagentDynamicIpv6sgBindingTablenot-accessiblecurrentA table of the IPv6SG dynamic entries
1.3.6.1.4.1.2356.16.1.1.2.8.33.9.1RowagentDynamicIpv6sgBindingEntrynot-accessiblecurrentRepresents a binding in IPSG table
1.3.6.1.4.1.2356.16.1.1.2.8.33.9.1.1ColumnagentDynamicIpv6sgBindingIfIndexread-onlycurrentInterface on which this IPv6SG binding is added.
1.3.6.1.4.1.2356.16.1.1.2.8.33.9.1.2ColumnagentDynamicIpv6sgBindingVlanIdread-onlycurrentVLAN to which this IPv6SG binding is going to be added.
1.3.6.1.4.1.2356.16.1.1.2.8.33.9.1.3ColumnagentDynamicIpv6sgBindingIpAddrread-onlycurrentSender IPv6 address match value for the IPv6SG binding.
1.3.6.1.4.1.2356.16.1.1.2.8.33.9.1.4ColumnagentDynamicIpv6sgBindingMacAddrread-onlycurrentMAC address match value for the IPv6SG Binding.
1.3.6.1.4.1.2356.16.1.1.2.8.33.10TableagentStaticDsv6BindingTablenot-accessiblecurrentA table of the DHCPv6 SNOOPING static entries
1.3.6.1.4.1.2356.16.1.1.2.8.33.10.1RowagentStaticDsv6BindingEntrynot-accessiblecurrentRepresents a static binding in DHCPv6 SNOOPING table
1.3.6.1.4.1.2356.16.1.1.2.8.33.10.1.1ColumnagentStaticDsv6BindingIfIndexread-createcurrentInterface on which this static DHCPv6 SNOOPING binding is going to be added.
1.3.6.1.4.1.2356.16.1.1.2.8.33.10.1.2ColumnagentStaticDsv6BindingVlanIdread-createcurrentVLAN to which this static DHCPv6 SNOOPING binding is going to be added.
1.3.6.1.4.1.2356.16.1.1.2.8.33.10.1.3ColumnagentStaticDsv6BindingMacAddrread-createcurrentMAC address match value for the static DHCPv6 SNOOPING Binding.
1.3.6.1.4.1.2356.16.1.1.2.8.33.10.1.4ColumnagentStaticDsv6BindingIpAddrread-createcurrentIP address match value for the static DHCPv6 SNOOPING Binding.
1.3.6.1.4.1.2356.16.1.1.2.8.33.10.1.5ColumnagentStaticDsv6BindingRowStatusread-createcurrentThe status of this conceptual row. active(1) - this static DHCPv6 SNOOPING Binding is active createAndGo(4) - set to this value to create an instance destroy(6…
1.3.6.1.4.1.2356.16.1.1.2.8.33.11TableagentDynamicDsv6BindingTablenot-accessiblecurrentA table of the DHCPv6 SNOOPING Dynamic entries
1.3.6.1.4.1.2356.16.1.1.2.8.33.11.1RowagentDynamicDsv6BindingEntrynot-accessiblecurrentRepresents a dynamic binding in DHCPv6 SNOOPING table
1.3.6.1.4.1.2356.16.1.1.2.8.33.11.1.1ColumnagentDynamicDsv6BindingIfIndexread-onlycurrentInterface on which this dynamic DHCPv6 SNOOPING binding is going to be added.
1.3.6.1.4.1.2356.16.1.1.2.8.33.11.1.2ColumnagentDynamicDsv6BindingVlanIdread-onlycurrentVLAN to which this dynamic DHCPv6 SNOOPING binding is going to be added.
1.3.6.1.4.1.2356.16.1.1.2.8.33.11.1.3ColumnagentDynamicDsv6BindingMacAddrread-onlycurrentMAC address match value for the dynamic DHCPv6 SNOOPING Binding.
1.3.6.1.4.1.2356.16.1.1.2.8.33.11.1.4ColumnagentDynamicDsv6BindingIpAddrread-onlycurrentIP address match value for the dynamic DHCPv6 SNOOPING Binding.
1.3.6.1.4.1.2356.16.1.1.2.8.33.11.1.5ColumnagentDynamicDsv6BindingLeaseRemainingTimeread-onlycurrentThis specifies the period for which the dynamic DHCPv6 SNOOPING Binding is valid.
1.3.6.1.4.1.2356.16.1.1.2.8.33.12ScalaragentDhcpv6SnoopingRemoteFileNameread-writecurrentThis object indicates the file name on the remote machine to save the DHCPv6 Snooping bindings. This will be set only when we have a valid remote IP.
1.3.6.1.4.1.2356.16.1.1.2.8.33.13ScalaragentDhcpv6SnoopingRemoteIpAddrread-writecurrentThis object indicates the IP address of the remote machine to save the DHCPv6 Snooping bindings. This will be set only when we have a valid file name.
1.3.6.1.4.1.2356.16.1.1.2.8.33.14ScalaragentDhcpv6SnoopingStoreIntervalread-writecurrentThis object indicates the perodic time interval to save the DHCPv6 Snooping bindings.
1.3.6.1.4.1.2356.16.1.1.2.8.34TableagentSwitchSnoopSSMGroupTablenot-accessiblecurrentThe (conceptual) table listing the IP multicast Source Specific Multicast Groups for which there are members on a particular interface and VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.34.1RowagentSwitchSnoopSSMGroupEntrynot-accessiblecurrentAn entry (conceptual row) in the agentSwitchSnoopSSMGroupTable.
1.3.6.1.4.1.2356.16.1.1.2.8.34.1.1ColumnagentSwitchSnoopSSMGroupAddressTypenot-accessiblecurrentThe address type of the agentSwitchSnoopSSMGroupTable entry. This value applies to both the agentSwitchSnoopSSMGroupAddress and the agentSwitchSnoopSSMGroupLas…
1.3.6.1.4.1.2356.16.1.1.2.8.34.1.2ColumnagentSwitchSnoopSSMGroupAddressnot-accessiblecurrentThe IP multicast group address for which this entry contains information. The InetAddressType, e.g. IPv4 or IPv6, is identified by the agentSwitchSnoopSSMGroup…
1.3.6.1.4.1.2356.16.1.1.2.8.34.1.3ColumnagentSwitchSnoopSSMGroupIfIndexnot-accessiblecurrentThe interface for which this entry contains information for an IP multicast group address.
1.3.6.1.4.1.2356.16.1.1.2.8.34.1.4ColumnagentSwitchSnoopSSMGroupVlanIdnot-accessiblecurrentThe VLAN for which this entry contains information for an IP multicast group address.
1.3.6.1.4.1.2356.16.1.1.2.8.34.1.5ColumnagentSwitchSnoopSSMGroupLastReporterread-onlycurrentThe IP address of the source of the last membership report received for this IP Multicast group address on this interface and VLAN. The InetAddressType, e.g. I…
1.3.6.1.4.1.2356.16.1.1.2.8.34.1.6ColumnagentSwitchSnoopSSMGroupSourceFilterModeread-onlycurrentThe state in which the interface is currently set. The value indicates the relevance of the corresponding source list entries in the SrcList Table (agentSwitch…
1.3.6.1.4.1.2356.16.1.1.2.8.35TableagentSwitchSnoopSSMSrcListTablenot-accessiblecurrentThe (conceptual) table listing the Source List entries corresponding to each VLAN, interface and SSM multicast group pair on a MGMD Snooping switch.
1.3.6.1.4.1.2356.16.1.1.2.8.35.1RowagentSwitchSnoopSSMSrcListEntrynot-accessiblecurrentAn entry (conceptual row) in the agentSwitchSnoopSSMSrcListTable.
1.3.6.1.4.1.2356.16.1.1.2.8.35.1.1ColumnagentSwitchSnoopSSMSrcListAddressTypenot-accessiblecurrentThe address type of the InetAddress variables in this table. This value applies to the agentSwitchSnoopSSMSrcListHostAddress and agentSwitchSnoopSSMSrcListAddr…
1.3.6.1.4.1.2356.16.1.1.2.8.35.1.2ColumnagentSwitchSnoopSSMSrcListAddressnot-accessiblecurrentThe IP multicast group address for which this entry contains information.
1.3.6.1.4.1.2356.16.1.1.2.8.35.1.3ColumnagentSwitchSnoopSSMSrcListIfIndexnot-accessiblecurrentThe interface for which this entry contains information for an IP multicast group address.
1.3.6.1.4.1.2356.16.1.1.2.8.35.1.4ColumnagentSwitchSnoopSSMSrcListVlanIdnot-accessiblecurrentThe VLAN for which this entry contains information for an IP multicast group address.
1.3.6.1.4.1.2356.16.1.1.2.8.35.1.5ColumnagentSwitchSnoopSSMSrcListHostAddressread-onlycurrentThe host address to which this entry corresponds. The agentSwitchSnoopSSMGroupSourceFilterMode value for this Group address, interface and VLAN indicates wheth…
1.3.6.1.4.1.2356.16.1.1.2.8.36TableagentSwitchSnoopSSMFDBTablenot-accessiblecurrentMGMD Snooping Source Specific Multicast Forwarding database Table.
1.3.6.1.4.1.2356.16.1.1.2.8.36.1RowagentSwitchSnoopSSMFDBEntrynot-accessiblecurrentAn entry is created by IGMP Snooping for each group learned in the VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.36.1.1ColumnagentSwitchSnoopSSMFDBVlanIndexnot-accessiblecurrentThis object indicates the VLAN in which the group is learned.
1.3.6.1.4.1.2356.16.1.1.2.8.36.1.2ColumnagentSwitchSnoopSSMFDBGroupAddressTypenot-accessiblecurrentThis object indicates IP multicast address type learned by MGMD Snooping.
1.3.6.1.4.1.2356.16.1.1.2.8.36.1.3ColumnagentSwitchSnoopSSMFDBGroupAddressnot-accessiblecurrentThis object indicates IP multicast address learned by MGMD Snooping.
1.3.6.1.4.1.2356.16.1.1.2.8.36.1.4ColumnagentSwitchSnoopSSMFDBSourceAddressnot-accessiblecurrentThis object indicates IP Source address learned by MGMD Snooping.
1.3.6.1.4.1.2356.16.1.1.2.8.36.1.5ColumnagentSwitchSnoopSSMFDBIncludePortListread-onlycurrentThis object indicates the set of ports on which MGMD Membership Reports are received for the group indicating interest to receive traffic sent to the group.
1.3.6.1.4.1.2356.16.1.1.2.8.36.1.6ColumnagentSwitchSnoopSSMFDBExcludePortListread-onlycurrentThis object indicates the set of ports on which MGMD Membership Reports are received for the group indicating interest to not to receive traffic sent to the gr…
1.3.6.1.4.1.2356.16.1.1.2.8.37TableagentSwitchportConfigTablenot-accessiblecurrent
1.3.6.1.4.1.2356.16.1.1.2.8.37.1RowagentSwitchportConfigEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.16.1.1.2.8.37.1.1ColumnagentSwitchportIntfIndexread-onlycurrentThe port or LAG number to be selected. Each port/LAG maps to an interface.
1.3.6.1.4.1.2356.16.1.1.2.8.37.1.2ColumnagentSwitchportModeread-writecurrentConfigure the VLAN membership mode of a port.
1.3.6.1.4.1.2356.16.1.1.2.8.37.1.3ColumnagentSwitchportAccessVlanIDread-writecurrentConfigures the Access VLAN Id for the interface.
1.3.6.1.4.1.2356.16.1.1.2.8.37.1.4ColumnagentSwitchportTrunkNativeVlanIDread-writecurrentConfigures the Native VLAN Id for the interface.
1.3.6.1.4.1.2356.16.1.1.2.8.37.1.5ColumnagentSwitchportTrunkNativeVlanTaggingread-onlycurrentDescribes the Native VLAN tagging for the interface. 'disable' mean that packets marked with Native VLAN are transmitted untagged from Trunk port.
1.3.6.1.4.1.2356.16.1.1.2.8.37.1.6ColumnagentSwitchportTrunkAllowedVlanListread-writecurrentConfigures the allowed VLAN list of Trunk switch interface.
1.3.6.1.4.1.2356.16.1.1.2.8.37.1.7ColumnagentSwitchportGeneralUntaggedVlanListread-onlycurrentShows the allowed untagged VLAN list of general switch interface.
1.3.6.1.4.1.2356.16.1.1.2.8.37.1.8ColumnagentSwitchportGeneralTaggedVlanListread-onlycurrentShows the allowed tagged VLAN list of general switch interface.
1.3.6.1.4.1.2356.16.1.1.2.8.37.1.9ColumnagentSwitchportGeneralForbiddenVlanListread-onlycurrentShows the Forbidden VLAN list of general switch interface.
1.3.6.1.4.1.2356.16.1.1.2.8.37.1.10ColumnagentSwitchportGeneralDynamicallyAddedVlanListread-onlycurrentShows the list of dynamically added VLANs for general switch interface.
1.3.6.1.4.1.2356.16.1.1.2.8.37.1.11ColumnagentSwitchportOperModeread-onlycurrentFetch the operational switchport mode of a port.
1.3.6.1.4.1.2356.16.1.1.2.8.38TableagentSwitchFdbPortClearTablenot-accessiblecurrentThis table is used to clear the learned FDB entries to the specified port.
1.3.6.1.4.1.2356.16.1.1.2.8.38.1RowagentSwitchFdbPortClearEntrynot-accessiblecurrentThis table is used to clear the dynamically learned FDB entries for the specified port.
1.3.6.1.4.1.2356.16.1.1.2.8.38.1.1ColumnagentPortFdbEntriesClearread-writecurrentUse this object to clear the dynamically learned FDB entries for the specified interface. This is write-only value. It always returns '1' on request.
1.3.6.1.4.1.2356.16.1.1.2.8.39TableagentSwitchFdbVlanClearTablenot-accessiblecurrentThis table is used to clear dynamically learned FDB entries for the specified VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.39.1RowagentSwitchFdbVlanClearEntrynot-accessiblecurrentThis table is used to clear dynamically learned FDB entries for the specified VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.39.1.1ColumnagentVlanFdbEntriesClearread-writecurrentUse this object to clear dynamically learned FDB entries for the specified VLAN. This is write-only value. It always returns '1' on request.
1.3.6.1.4.1.2356.16.1.1.2.8.40ScalaragentFdbEntriesClearAllread-writecurrentUse this object to clear all dynamically learned FDB entries. This is write-only value. It always returns '1' on request.
1.3.6.1.4.1.2356.16.1.1.2.8.41ScalaragentFdbEntriesClearMacAddrread-writecurrentUse this object to clear dynamically learned FDB entries which match the specified MAC or range specified by MAC address(agentFdbEntriesClearMacAddr object) an…
1.3.6.1.4.1.2356.16.1.1.2.8.42ScalaragentFdbEntriesClearMacMaskread-writecurrentUse this object to clear dynamically learned FDB entries which match the range specified by MAC address(agentFdbEntriesClearMacAddr object) and mask(agentFdbEn…
1.3.6.1.4.1.2356.16.1.1.2.8.43NodeagentSwitchKeepaliveGroup
1.3.6.1.4.1.2356.16.1.1.2.8.43.1ScalaragentSwitchKeepaliveStateread-writecurrentThe keepalive state for the switch. enable (1) - enables keepalive on the switch. disable (2) - disables keepalive on the switch. The default switch keepalive …
1.3.6.1.4.1.2356.16.1.1.2.8.43.2ScalaragentSwitchKeepaliveTransmitIntervalread-writecurrentThe keepalive state for the port. enable (1) - enables loop protect on the switch. disable (2) - disables loop protect on the switch.
1.3.6.1.4.1.2356.16.1.1.2.8.44ScalaragentSwitchGlobalVlanSecurityModeread-onlycurrentMode showing whether at the global level, vlan mac locking is enabled or not.
1.3.6.1.4.1.2356.16.1.1.2.8.45TableagentSwitchVlanSecurityTablenot-accessiblecurrentA table to configure VLAN MAC locking parameters: dynamic limit, shutdown action and trap notification values per VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.45.1RowagentSwitchVlanSecurityEntrynot-accessiblecurrentRepresents entry for VLAN MAC locking table
1.3.6.1.4.1.2356.16.1.1.2.8.45.1.1ColumnagentSwitchVlanSecurityVlanIdnot-accessiblecurrentRequested VLAN ID for configuring MAC locking parameters.
1.3.6.1.4.1.2356.16.1.1.2.8.45.1.2ColumnagentSwitchVlanSecurityDynamicMACLimitread-writecurrentMAC limit value for amount of dynamically learned MAC addresses per VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.45.1.3ColumnagentSwitchVlanSecurityShutdownActionread-writecurrentShutdown action value for specified VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.45.1.4ColumnagentSwitchVlanSecurityTrapNotificationread-writecurrentTrap notification value for specified VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.45.1.5ColumnagentSwitchVlanSecurityRowStatusread-writecurrentRow status object of table. Set Destroy(6) for disabling VLAN MAC locking for specified VLAN id. Return Active(1) value.
1.3.6.1.4.1.2356.16.1.1.2.8.46TableagentSwitchVlanSecurityDynamicTablenot-accessiblecurrentA table to display vlan mac locking dynamic mac entries.
1.3.6.1.4.1.2356.16.1.1.2.8.46.1RowagentSwitchVlanSecurityDynamicEntrynot-accessiblecurrentRepresents entry for vlan mac Locking table
1.3.6.1.4.1.2356.16.1.1.2.8.46.1.1ColumnagentSwitchVlanSecurityDynamicVLANIdread-onlycurrentSource VLAN id of the packet that is received on the dynamically locked vlan.
1.3.6.1.4.1.2356.16.1.1.2.8.46.1.2ColumnagentSwitchVlanSecurityDynamicifIndexread-onlycurrentSource interface index of the packet that is received on the dynamically locked vlan.
1.3.6.1.4.1.2356.16.1.1.2.8.46.1.3ColumnagentSwitchVlanSecurityDynamicMACAddressread-onlycurrentSource MAC address of the packet that is received on the dynamically locked vlan.
1.3.6.1.4.1.2356.16.1.1.2.8.46.1.4ColumnagentSwitchVlanSecurityDynamicLimitread-onlycurrentThis variable signifies the limit of dynamically locked MAC addresses per vlan.
1.3.6.1.4.1.2356.16.1.1.2.8.46.1.5ColumnagentSwitchVlanSecurityDynamicCountread-onlycurrentThis variable signifies the count of dynamically learned MAC addresses per vlan.
1.3.6.1.4.1.2356.16.1.1.2.8.46.1.6ColumnagentSwitchVlanSecurityDynamicTrapModeread-onlycurrentThis variable is used to enable or disable the sending of new violation traps designating when a packet with a disallowed MAC address is received on a locked p…
1.3.6.1.4.1.2356.16.1.1.2.8.46.1.7ColumnagentSwitchVlanSecurityDynamicShutdownModeread-onlycurrentThis variable is used to enable or disable the sending of new violation traps designating when a packet with a disallowed MAC address is received on a locked p…
1.3.6.1.4.1.2356.16.1.1.2.8.47NodeagentSwitchVlanStatsGroup
1.3.6.1.4.1.2356.16.1.1.2.8.47.1TableagentSwitchVlanStatsTablenot-accessiblecurrentVLAN Statistics Table
1.3.6.1.4.1.2356.16.1.1.2.8.47.1.1RowagentSwitchVlanStatsEntrynot-accessiblecurrentRepresents entry for VLAN Statistics Table
1.3.6.1.4.1.2356.16.1.1.2.8.47.1.1.1ColumnagentSwitchVlanStatsVlanIdnot-accessiblecurrentRequested VLAN ID
1.3.6.1.4.1.2356.16.1.1.2.8.47.1.1.2ColumnagentSwitchVlanStatsStatusread-createcurrentStatus of the statistics collection on the VLAN. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the…
1.3.6.1.4.1.2356.16.1.1.2.8.47.1.1.3ColumnagentSwitchVlanStatsReceiveBytesread-onlycurrentNumber of bytes received for a VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.47.1.1.4ColumnagentSwitchVlanStatsReceivePacketsread-onlycurrentNumber of packets received for a VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.47.1.1.5ColumnagentSwitchVlanStatsReceiveDiscardBytesread-onlycurrentNumber of bytes received but discarded for a VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.47.1.1.6ColumnagentSwitchVlanStatsReceiveDiscardPacketsread-onlycurrentNumber of packets received but discarded for a VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.47.1.1.7ColumnagentSwitchVlanStatsTransmitBytesread-onlycurrentNumber of bytes transmitted for a VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.47.1.1.8ColumnagentSwitchVlanStatsTransmitPacketsread-onlycurrentNumber of packets transmitted for a VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.47.1.1.9ColumnagentSwitchVlanStatsTransmitDiscardBytesread-onlycurrentNumber of bytes discarded at egress for a VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.47.1.1.10ColumnagentSwitchVlanStatsTransmitDiscardPacketsread-onlycurrentNumber of packets discarded at egress for a VLAN.
1.3.6.1.4.1.2356.16.1.1.2.8.47.1.1.11ColumnagentSwitchVlanStatsClearread-createcurrentWhen set to enable(1), all statistics for the VLAN will be cleared.
1.3.6.1.4.1.2356.16.1.1.2.9NodeagentTransferConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.9.1NodeagentTransferUploadGroup
1.3.6.1.4.1.2356.16.1.1.2.9.1.1ScalaragentTransferUploadModeread-writecurrentTransfer upload mode configures the mode to use when uploading from the switch. The mode is either X/Y/ZMODEM, TFTP, SFTP or SCP. X/Y/ZMODEM is valid only when…
1.3.6.1.4.1.2356.16.1.1.2.9.1.2ScalaragentTransferUploadServerIPread-writedeprecatedTransfer upload server IP configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP, SFTP, or SCP. The…
1.3.6.1.4.1.2356.16.1.1.2.9.1.3ScalaragentTransferUploadPathread-writecurrentTransfer upload path configures the directory path where the file is to be uploaded to. The switch remembers the last file path used.
1.3.6.1.4.1.2356.16.1.1.2.9.1.4ScalaragentTransferUploadFilenameread-writecurrentTransfer upload filename configures the file name for the file being uploaded from the switch. It can be up to 31 alphanumeric characters. The switch remembers…
1.3.6.1.4.1.2356.16.1.1.2.9.1.5ScalaragentTransferUploadDataTyperead-writecurrentTransfer upload datatype configures the type of file to upload from the switch. The types for upload are: - Configuration File - Error log - Message log - Trap…
1.3.6.1.4.1.2356.16.1.1.2.9.1.6ScalaragentTransferUploadStartread-writecurrentTransfer upload start will start an upload transfer. The agentTransferUploadMode object must not be set to xmodem(2), ymodem(3), or zmodem(4) to initiate a tra…
1.3.6.1.4.1.2356.16.1.1.2.9.1.7ScalaragentTransferUploadStatusread-onlycurrentIndicates the current status of an upload transfer.
1.3.6.1.4.1.2356.16.1.1.2.9.1.8ScalaragentTransferUploadServerAddressTyperead-writecurrentThe type of the serverip address, as defined in the InetAddress MIB. The agentTransferUploadServerAddress object is intepreted within the context of agentTrans…
1.3.6.1.4.1.2356.16.1.1.2.9.1.9ScalaragentTransferUploadServerAddressread-writecurrentTransfer upload serverip configures the IP address of the server where the file is to be uploaded to.It is valid only when the Transfer Mode is TFTP, SFTP or S…
1.3.6.1.4.1.2356.16.1.1.2.9.1.10ScalaragentTransferUploadImagenameread-writecurrentTransfer upload image name. Sets the image to be uploaded as the specified name. Imagename cannot be set to unknown(1) option. When no name is set this object …
1.3.6.1.4.1.2356.16.1.1.2.9.1.11ScalaragentTransferUploadUsernameread-writecurrentUsername applicable to secure upload types, i.e., SFTP or SCP and FTP.
1.3.6.1.4.1.2356.16.1.1.2.9.1.12ScalaragentTransferUploadPasswordread-writecurrentPassword applicable to secure upload types, i.e. SFTP or SCP and FTP.
1.3.6.1.4.1.2356.16.1.1.2.9.1.14ScalaragentTransferUploadRemoteFilenameread-writecurrentTransfer upload remote filename configures the file name for the file being created remotely. It can be up to 31 alphanumeric characters. Note: File Name, File…
1.3.6.1.4.1.2356.16.1.1.2.9.1.15ScalaragentTransferUploadSourceInterfaceread-writecurrentA source-interface selection on an Interface Index (like vlan based routing interface, port based routing interface, loopback interface, tunnel interface). A n…
1.3.6.1.4.1.2356.16.1.1.2.9.1.16ScalaragentTransferUploadServicePortSrcInterfaceread-writecurrentTo select Service Port as a source-interface.
1.3.6.1.4.1.2356.16.1.1.2.9.1.17ScalaragentTransferUploadUnitIdread-writecurrentTo select unit for upload.
1.3.6.1.4.1.2356.16.1.1.2.9.1.18ScalaragentTransferUploadLicenseKeyIndexread-writecurrentTo select the license key file index for Upload.
1.3.6.1.4.1.2356.16.1.1.2.9.2NodeagentTransferDownloadGroup
1.3.6.1.4.1.2356.16.1.1.2.9.2.1ScalaragentTransferDownloadModeread-writecurrentTransfer download mode configures the mode to use when downloading to the switch. The mode is either X/Y/ZMODEM, TFTP, FTP, SFTP, SCP, HTTP or HTTPS. X/Y/ZMODE…
1.3.6.1.4.1.2356.16.1.1.2.9.2.2ScalaragentTransferDownloadServerIPread-writedeprecatedTransfer download serverip configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP, SFTP or SCP. The…
1.3.6.1.4.1.2356.16.1.1.2.9.2.3ScalaragentTransferDownloadPathread-writecurrentTransfer download path configures the directory path where the file is located. The switch remembers the last file path used.
1.3.6.1.4.1.2356.16.1.1.2.9.2.4ScalaragentTransferDownloadFilenameread-writecurrentTransfer download filename configures the file name for the file being downloaded to the switch. It can be up to 31 alphanumeric characters. The switch remembe…
1.3.6.1.4.1.2356.16.1.1.2.9.2.5ScalaragentTransferDownloadDataTyperead-writecurrentTransfer download datatype configures the type of file to download to the switch. The types for download are: code - Code File config - Configuration File sshk…
1.3.6.1.4.1.2356.16.1.1.2.9.2.6ScalaragentTransferDownloadStartread-writecurrentTransfer download start will start an download transfer. The agentTransferDownloadMode object must not be set to xmodem(2), ymodem(3), or zmodem(4) to initiate…
1.3.6.1.4.1.2356.16.1.1.2.9.2.7ScalaragentTransferDownloadStatusread-onlycurrentIndicates the current status of an download transfer.
1.3.6.1.4.1.2356.16.1.1.2.9.2.8ScalaragentTransferDownloadServerAddressTyperead-writecurrentThe type of the serverip address, as defined in the InetAddress MIB. The agentTransferDownloadServerAddress object is intepreted within the context of agentTra…
1.3.6.1.4.1.2356.16.1.1.2.9.2.9ScalaragentTransferDownloadServerAddressread-writecurrentTransfer download serverip configures the IP address of the server where the file is to be downloaded from. It is valid only when the Transfer Mode is TFTP, SF…
1.3.6.1.4.1.2356.16.1.1.2.9.2.10ScalaragentTransferDownloadImagenameread-writecurrentTransfer download image name. Sets the downloaded image as the specified name. Imagename cannot be set to unknown(1) option. When no name is set this object re…
1.3.6.1.4.1.2356.16.1.1.2.9.2.11ScalaragentTransferDownloadUsernameread-writecurrentUsername applicable to secure download types, i.e., SFTP or SCP or FTP. Username is optional for download types HTTPS or HTTP.
1.3.6.1.4.1.2356.16.1.1.2.9.2.12ScalaragentTransferDownloadPasswordread-writecurrentPassword applicable to secure download types, i.e. SFTP or SCP and FTP. Password is optional for download types HTTPS or HTTP.
1.3.6.1.4.1.2356.16.1.1.2.9.2.13ScalaragentTransferDownloadRemoteFilenameread-writecurrentTransfer download remote filename configures the file name for the file being transferred from remote system. It can be up to 31 alphanumeric characters.
1.3.6.1.4.1.2356.16.1.1.2.9.2.15ScalaragentTransferDownloadSourceInterfaceread-writecurrentA source-interface selection on an Interface Index (like vlan based routing interface, port based routing interface, loopback interface, tunnel interface). A n…
1.3.6.1.4.1.2356.16.1.1.2.9.2.16ScalaragentTransferDownloadServicePortSrcInterfaceread-writecurrentTo select Service Port as a source-interface.
1.3.6.1.4.1.2356.16.1.1.2.9.2.17ScalaragentTransferDownloadCertificateNumread-writecurrentTo assign the certificate number index for downloading SSL certificates
1.3.6.1.4.1.2356.16.1.1.2.9.2.18ScalaragentTransferDownloadHttpsServerCertVerifySelectread-writecurrentSet the option to perform HTTPS server certificate validation with the root CA while downloading file from HTTPS server. The following options are supported ch…
1.3.6.1.4.1.2356.16.1.1.2.9.2.19ScalaragentTransferLicenseKeyIndexread-writecurrentTo assign the license key index number when downloading license files .
1.3.6.1.4.1.2356.16.1.1.2.9.3NodeagentImageConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.9.3.1ScalaragentImage1read-onlyobsoleteThe image1 software version .
1.3.6.1.4.1.2356.16.1.1.2.9.3.2ScalaragentImage2read-onlyobsoleteThe image2 software version.
1.3.6.1.4.1.2356.16.1.1.2.9.3.3ScalaragentActiveImageread-onlyobsoleteThe active image name. image1 or image2.
1.3.6.1.4.1.2356.16.1.1.2.9.3.4ScalaragentNextActiveImageread-writeobsoleteThe next active image name. user assigns either image1 or image2.
1.3.6.1.4.1.2356.16.1.1.2.9.3.5ScalaragentActiveImageVersionread-onlycurrentThe software version of the active image.
1.3.6.1.4.1.2356.16.1.1.2.9.3.6ScalaragentBackupImageVersionread-onlycurrentThe software version of the backup image if present.
1.3.6.1.4.1.2356.16.1.1.2.9.3.7ScalaragentNextSelectedImageread-writecurrentThe image selected for loading on next boot.
1.3.6.1.4.1.2356.16.1.1.2.10NodeagentPortMirroringGroup
1.3.6.1.4.1.2356.16.1.1.2.10.1ScalaragentMirroredPortIfIndexread-writeobsoleteIfIndex of the mirrored port
1.3.6.1.4.1.2356.16.1.1.2.10.2ScalaragentProbePortIfIndexread-writeobsoleteIfIndex of the probe port
1.3.6.1.4.1.2356.16.1.1.2.10.3ScalaragentPortMirroringModeread-writeobsoletePort mirroring mode: enable - enable mirroring mode disable - disable mirroring mode delete - clear MirroredPort and Probe Port configuration
1.3.6.1.4.1.2356.16.1.1.2.10.4TableagentPortMirrorTablenot-accessiblecurrentThis table includes entries for each Port Mirroring session.
1.3.6.1.4.1.2356.16.1.1.2.10.4.1RowagentPortMirrorEntrynot-accessiblecurrentProvides configuration of a Port Mirroring session specifying the destination port, and the source Port Mask, providing a many-to-one mapping.
1.3.6.1.4.1.2356.16.1.1.2.10.4.1.1ColumnagentPortMirrorSessionNumnot-accessiblecurrentThe Session number of this mirroring entry. The number of sessions is fixed, and is platform dependant.
1.3.6.1.4.1.2356.16.1.1.2.10.4.1.2ColumnagentPortMirrorDestinationPortread-writecurrentThe port which traffic from the mirrored ports will be sent to.
1.3.6.1.4.1.2356.16.1.1.2.10.4.1.3ColumnagentPortMirrorSourcePortMaskread-writecurrentThe ports from which traffic will be sent to the destination port. The destination port can not be included in this list of ports.
1.3.6.1.4.1.2356.16.1.1.2.10.4.1.4ColumnagentPortMirrorAdminModeread-writecurrentThe status of this port mirroring session. enable(1) - This session is active and all traffic from the source ports will be mirrored to the destination port. d…
1.3.6.1.4.1.2356.16.1.1.2.10.4.1.5ColumnagentPortMirrorSourceVlanread-writecurrentThe vlan from which traffic will be sent to the destination port.
1.3.6.1.4.1.2356.16.1.1.2.10.4.1.6ColumnagentPortMirrorRemoteSourceVlanread-writecurrentThe remote vlan from which traffic will be sent to the destination port.
1.3.6.1.4.1.2356.16.1.1.2.10.4.1.7ColumnagentPortMirrorRemoteDestinationVlanread-writecurrentThe VLAN that forwards the network traffic to the destination switch. NOTE: In order to set value for the object, need to set values for agentPortMirrorRemoteD…
1.3.6.1.4.1.2356.16.1.1.2.10.4.1.8ColumnagentPortMirrorReflectorPortread-writecurrentThe port which traffic from the mirrored ports will be sent to in case of destination being remote VLAN. NOTE: In order to set value for the object, need to se…
1.3.6.1.4.1.2356.16.1.1.2.10.4.1.9ColumnagentPortMirrorDestPortRspanTagread-writecurrentSpecify whether need to remove RSPAN tag option for mirrored traffic. false(0) - Do not remove RSPAN tag option from the mirrored traffic. true(1) - Remove RSP…
1.3.6.1.4.1.2356.16.1.1.2.10.4.1.10ColumnagentPortMirrorIpAccessListNumberread-writecurrentThe IP access-list number attached to the port mirroring session.
1.3.6.1.4.1.2356.16.1.1.2.10.4.1.11ColumnagentPortMirrorMacAccessListNumberread-writecurrentThe MAC access-list number attached to the port mirroring session.
1.3.6.1.4.1.2356.16.1.1.2.10.4.1.12ColumnagentPortMirrorRemoteDstErspanSrcIdread-writecurrentThe Source Flow ID number used by the Destination ERSPAN session to identify the ERSPAN traffic
1.3.6.1.4.1.2356.16.1.1.2.10.4.1.13ColumnagentPortMirrorRemoteDstErspanSrcIpread-writecurrentThe Source IP address of Destination ERSPAN session from which traffic will be sent to the destination port
1.3.6.1.4.1.2356.16.1.1.2.10.4.1.14ColumnagentPortMirrorRemoteSrcErspanDstIdread-writecurrentThe Destination Flow ID number used by the Source ERSPAN session to identify the ERSPAN traffic.
1.3.6.1.4.1.2356.16.1.1.2.10.4.1.15ColumnagentPortMirrorRemoteSrcErspanDstIpread-writecurrentThe Destination IP address of Source ERSPAN session from which traffic will be received and sent to the destination port.
1.3.6.1.4.1.2356.16.1.1.2.10.4.1.16ColumnagentPortMirrorRemoteSrcErspanDstOriginIpread-writecurrentThe Destination IP address of Source ERSPAN session, which will be used as the source of the ERSPAN traffic.
1.3.6.1.4.1.2356.16.1.1.2.10.4.1.17ColumnagentPortMirrorRemoteSrcErspanDstIpTtlread-writecurrentThe IP time-to-live (TTL) value of the packets in the Source ERSPAN session traffic.
1.3.6.1.4.1.2356.16.1.1.2.10.4.1.18ColumnagentPortMirrorRemoteSrcErspanDstIpDscpread-writecurrentThe differentiated services code point (DSCP) value of the packets in the Source ERSPAN session traffic.
1.3.6.1.4.1.2356.16.1.1.2.10.4.1.19ColumnagentPortMirrorRemoteSrcErspanDstIpPrecread-writecurrentThe IP precedence value of the packets in the Source ERSPAN session traffic.
1.3.6.1.4.1.2356.16.1.1.2.10.4.1.20ColumnagentPortMirrorRemoteSrcErspanDstReflectorPortread-writecurrentThe port which traffic from the mirrored ports will be sent to in case of destination being Source ERSPAN.
1.3.6.1.4.1.2356.16.1.1.2.10.5TableagentPortMirrorTypeTablenot-accessiblecurrentThis table includes entries for each source port's direction of port mirroring.
1.3.6.1.4.1.2356.16.1.1.2.10.5.1RowagentPortMirrorTypeEntrynot-accessiblecurrentProvides configuration of a Port Mirroring direction specifying the session of the port mirroring and source port
1.3.6.1.4.1.2356.16.1.1.2.10.5.1.1ColumnagentPortMirrorTypeSourcePortnot-accessiblecurrentThe port from which traffic will be sent to the destination port. This port should be a source port in the corresponding session
1.3.6.1.4.1.2356.16.1.1.2.10.5.1.2ColumnagentPortMirrorTypeTyperead-writecurrentThe direction of the data to be mirrored on this source port. tx(1) - The data that is transmitted from the source port. rx(2) - The data that is received on t…
1.3.6.1.4.1.2356.16.1.1.2.10.6ScalaragentPortMirrorRemoteVlanread-writeobsoleteThe VLAN configured as RSPAN VLAN.
1.3.6.1.4.1.2356.16.1.1.2.10.7TableagentPortMirrorRemoteVlanTablenot-accessiblecurrentA table of the RSPAN VLAN config entries
1.3.6.1.4.1.2356.16.1.1.2.10.7.1RowagentPortMirrorRemoteVlanEntrynot-accessiblecurrentRSPAN VLAN config entry
1.3.6.1.4.1.2356.16.1.1.2.10.7.1.1ColumnagentPortMirrorRemoteVlanIndexread-createcurrentThe VLAN which is configured as a remote-span VLAN.
1.3.6.1.4.1.2356.16.1.1.2.10.7.1.2ColumnagentPortMirrorRemoteVlanRowStatusread-createcurrentThe status of this entry. active(1) - the VLAN is configured as a remote-span VLAN createAndGo(4) - add the VLAN as a remote-span VLAN destroy(6) - remove the …
1.3.6.1.4.1.2356.16.1.1.2.12TableagentDot3adAggPortTablenot-accessiblecurrentThis table provides 802.3ad link aggregation information for each physical port that is not available through the standard MIB.
1.3.6.1.4.1.2356.16.1.1.2.12.1RowagentDot3adAggPortEntrynot-accessiblecurrentInformation about a table entry. The agentDot3adAggPort identifies the external interface number of the port.
1.3.6.1.4.1.2356.16.1.1.2.12.1.1ColumnagentDot3adAggPortread-onlycurrentifIndex of this physical port
1.3.6.1.4.1.2356.16.1.1.2.12.1.2ColumnagentDot3adAggPortLACPModeread-writecurrentEnable/disable 802.3ad LACP on this port
1.3.6.1.4.1.2356.16.1.1.2.13TableagentPortConfigTablenot-accessiblecurrentA table of the switch's physical port config entries
1.3.6.1.4.1.2356.16.1.1.2.13.1RowagentPortConfigEntrynot-accessiblecurrentSwitch's physical port config entry
1.3.6.1.4.1.2356.16.1.1.2.13.1.1ColumnagentPortDot1dBasePortread-onlycurrentThe port number of this port.
1.3.6.1.4.1.2356.16.1.1.2.13.1.2ColumnagentPortIfIndexread-onlycurrentThe switch's Port IfIndex
1.3.6.1.4.1.2356.16.1.1.2.13.1.3ColumnagentPortIanaTyperead-onlycurrentThe switch's Port Type
1.3.6.1.4.1.2356.16.1.1.2.13.1.4ColumnagentPortSTPModeread-writeobsoleteThe switch's Port Spanning Tree Protocol Mode STP mode values are: dot1d (the default) fast, indicates you want to use the fast spanning tree mode off, indicat…
1.3.6.1.4.1.2356.16.1.1.2.13.1.5ColumnagentPortSTPStateread-onlyobsoleteThe switch's Port Spanning Tree Protocol State. This object is only supported when the Dot1d Protocol is enabled.
1.3.6.1.4.1.2356.16.1.1.2.13.1.6ColumnagentPortAdminModeread-writecurrentThe switch's Port Admin Mode
1.3.6.1.4.1.2356.16.1.1.2.13.1.7ColumnagentPortPhysicalModeread-writecurrentThe switch's Port Speed Mode. This is the configured physical mode. This object is read-only for gigabit ports
1.3.6.1.4.1.2356.16.1.1.2.13.1.8ColumnagentPortPhysicalStatusread-onlyobsoleteThe switch's Port Physical Speed Status. This is the current actual speed.
1.3.6.1.4.1.2356.16.1.1.2.13.1.9ColumnagentPortLinkTrapModeread-writecurrentIf enabled, link up and link down traps will be sent for this port.
1.3.6.1.4.1.2356.16.1.1.2.13.1.10ColumnagentPortClearStatsread-writecurrentclear stats for this port only
1.3.6.1.4.1.2356.16.1.1.2.13.1.11ColumnagentPortDefaultTyperead-writecurrentThis object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by agentPortType. This object rep…
1.3.6.1.4.1.2356.16.1.1.2.13.1.13ColumnagentPortAutoNegAdminStatusread-writecurrentThis object identifies the administration status of auto negotiation for this port.
1.3.6.1.4.1.2356.16.1.1.2.13.1.14ColumnagentPortDot3FlowControlModeread-writecurrentConfig flowcontrol allows you to enable or disable 802.3x flow control for this port. This value applies to only full-duplex mode ports. Enabling symmetric flo…
1.3.6.1.4.1.2356.16.1.1.2.13.1.15ColumnagentPortDVlanTagModeread-writecurrentControls the Double Vlan Tag mode on this port.
1.3.6.1.4.1.2356.16.1.1.2.13.1.16ColumnagentPortDVlanTagEthertyperead-writecurrentConfigures the Double Vlan Tag Ethertype for this port. If this object is supported, ethertype cannot be configured globally for the switch. Commonly used are …
1.3.6.1.4.1.2356.16.1.1.2.13.1.17ColumnagentPortDVlanTagCustomerIdread-writecurrentConfigures the Customer ID for the Double Vlan Tag for this port.
1.3.6.1.4.1.2356.16.1.1.2.13.1.18ColumnagentPortMaxFrameSizeLimitread-onlycurrentThis object identifies the largest value that can be configured for agentPortMaxFrameSize. This is the highest value for Maximum Transmit Unit(MTU)
1.3.6.1.4.1.2356.16.1.1.2.13.1.19ColumnagentPortMaxFrameSizeread-writecurrentThis object identifies the currently configured mtu value for this port. The maximmum value that this object can be set to is the value of agentPortMaxFrameSiz…
1.3.6.1.4.1.2356.16.1.1.2.13.1.20ColumnagentPortBroadcastControlModeread-writecurrentIf enabled, broadcast storm recovery will function on this port. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on this Etherne…
1.3.6.1.4.1.2356.16.1.1.2.13.1.21ColumnagentPortBroadcastControlThresholdread-writecurrentConfigures the broadcast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.
1.3.6.1.4.1.2356.16.1.1.2.13.1.22ColumnagentPortMulticastControlModeread-writecurrentIf enabled, multicast storm recovery will function on this port. When you specify Enable for Multicast Storm Recovery and the multicast traffic on this Etherne…
1.3.6.1.4.1.2356.16.1.1.2.13.1.23ColumnagentPortMulticastControlThresholdread-writecurrentConfigures the multicast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.
1.3.6.1.4.1.2356.16.1.1.2.13.1.24ColumnagentPortUnicastControlModeread-writecurrentIf enabled, unicast storm recovery will function on this port. When you specify Enable for Unicast Storm Recovery and the unknown unicast traffic on this Ether…
1.3.6.1.4.1.2356.16.1.1.2.13.1.25ColumnagentPortUnicastControlThresholdread-writecurrentConfigures the unicast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.
1.3.6.1.4.1.2356.16.1.1.2.13.1.26ColumnagentPortBroadcastControlThresholdUnitread-writecurrentConfigures the units of the threshold value to percentage of port speed or absolute packets per second.
1.3.6.1.4.1.2356.16.1.1.2.13.1.27ColumnagentPortMulticastControlThresholdUnitread-writecurrentConfigures the units of the threshold value to percentage of port speed or absolute packets per second.
1.3.6.1.4.1.2356.16.1.1.2.13.1.28ColumnagentPortUnicastControlThresholdUnitread-writecurrentConfigures the units of the threshold value to percentage of port speed or absolute packets per second.
1.3.6.1.4.1.2356.16.1.1.2.13.1.29ColumnagentPortVoiceVlanModeread-writecurrentDescribes and Configures the Port Voice VLAN Mode. This object can only be set to disable(5).
1.3.6.1.4.1.2356.16.1.1.2.13.1.30ColumnagentPortVoiceVlanIDread-writecurrentDescribes and Configures the Port Voice VLAN ID if the Voice Vlan Mode is Vlan ID.
1.3.6.1.4.1.2356.16.1.1.2.13.1.31ColumnagentPortVoiceVlanPriorityread-writecurrentDescribes and Configures the Port Voice VLAN Priority if the Voice Vlan Mode is dot1p. A value of 255 indicates that the priority is not configured.
1.3.6.1.4.1.2356.16.1.1.2.13.1.32ColumnagentPortVoiceVlanDataPriorityModeread-writecurrentDescribes and Configures the Port Voice VLAN Data Priority Mode.
1.3.6.1.4.1.2356.16.1.1.2.13.1.33ColumnagentPortVoiceVlanOperationalStatusread-onlycurrentDescribes the Port Voice VLAN Operational Status.
1.3.6.1.4.1.2356.16.1.1.2.13.1.34ColumnagentPortVoiceVlanUntaggedread-writecurrentDescribes and Configures the Port Voice VLAN tagging mode.
1.3.6.1.4.1.2356.16.1.1.2.13.1.35ColumnagentPortVoiceVlanNoneModeread-writecurrentDescribes and Configures the Port Voice VLAN None mode.
1.3.6.1.4.1.2356.16.1.1.2.13.1.36ColumnagentPortVoiceVlanDSCPread-writecurrentDescribes and Configures the Port Voice VLAN DSCP value.
1.3.6.1.4.1.2356.16.1.1.2.13.1.37ColumnagentPortVoiceVlanAuthModeread-writecurrentDescribes and Configures the Port Voice VLAN Authentication mode. Disable means authentication not required for voice devices when dot1x is enabled.
1.3.6.1.4.1.2356.16.1.1.2.13.1.38ColumnagentPortDot3FlowControlOperStatusread-onlycurrentThis object identifies operational status of the flow control per port.
1.3.6.1.4.1.2356.16.1.1.2.13.1.40ColumnagentPortLoadStatsIntervalread-writecurrentThe length of time for which data is used to compute load statistics. The value is given in seconds, and must be a multiple of 30. The allowable range is 30 to…
1.3.6.1.4.1.2356.16.1.1.2.13.1.41ColumnagentPortDDisableAutorecoveryTimeread-onlycurrentThe time in seconds left to port autorecovery from D-Disable state.
1.3.6.1.4.1.2356.16.1.1.2.13.1.42ColumnagentPortDDisableComponentsread-onlycurrentThe list of components put the port to D-Disable state.
1.3.6.1.4.1.2356.16.1.1.2.13.1.45ColumnagentPortSwitchportModeread-writecurrent
1.3.6.1.4.1.2356.16.1.1.2.13.1.46ColumnagentPortDDisableReasonread-onlycurrentThe reason for which the port is set to D-Disable. Here reason is the enum assigned to the particular component.
1.3.6.1.4.1.2356.16.1.1.2.13.1.47ColumnagentPortBroadcastControlActionread-writecurrentConfigures the action to be taken when broadcast storm control rate limit is reached. none(0) - No action is taken. shutdown(1) - Diag disable the interface on…
1.3.6.1.4.1.2356.16.1.1.2.13.1.48ColumnagentPortMulticastControlActionread-writecurrentConfigures the action to be taken when multicast storm control rate limit is reached. none(0) - No action is taken. shutdown(1) - Diag disable the interface on…
1.3.6.1.4.1.2356.16.1.1.2.13.1.49ColumnagentPortUnicastControlActionread-writecurrentConfigures the action to be taken when unicast storm control rate limit is reached. none(0) - No action is taken. shutdown(1) - Diag disable the interface on s…
1.3.6.1.4.1.2356.16.1.1.2.13.1.51ColumnagentPortOperationalVoiceVlanIDread-onlycurrentDescribes the Port Operational Voice VLAN ID if the Voice Vlan Mode is Vlan ID.
1.3.6.1.4.1.2356.16.1.1.2.13.1.150ColumnagentPortDescriptionread-writecurrentPort Description.
1.3.6.1.4.1.2356.16.1.1.2.13.1.151ColumnagentPortAutoNegCapread-writecurrentSets the autonegotiation capabilities for this port
1.3.6.1.4.1.2356.16.1.1.2.14NodeagentProtocolConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.14.1ScalaragentProtocolGroupCreateread-writeobsoleteSet to non-empty string to create a Protocol-Based VLAN group.
1.3.6.1.4.1.2356.16.1.1.2.14.2TableagentProtocolGroupTablenot-accessiblecurrentA table of the switch's Protocol-based VLAN entries
1.3.6.1.4.1.2356.16.1.1.2.14.2.1RowagentProtocolGroupEntrynot-accessiblecurrentSwitch's Protocol-based VLAN entry
1.3.6.1.4.1.2356.16.1.1.2.14.2.1.1ColumnagentProtocolGroupIdnot-accessiblecurrentGroup identifier of the Protocol-based VLAN entry.
1.3.6.1.4.1.2356.16.1.1.2.14.2.1.2ColumnagentProtocolGroupNameread-writecurrentGroup name of the Protocol-based VLAN entry.
1.3.6.1.4.1.2356.16.1.1.2.14.2.1.3ColumnagentProtocolGroupVlanIdread-writecurrentVLAN associated with the Protocol-based VLAN entry. Set to 0 to remove.
1.3.6.1.4.1.2356.16.1.1.2.14.2.1.4ColumnagentProtocolGroupProtocolIPread-writeobsoleteThe status of the IP protocol association with the Protocol-based VLAN entry.
1.3.6.1.4.1.2356.16.1.1.2.14.2.1.5ColumnagentProtocolGroupProtocolARPread-writeobsoleteThe status of the ARP protocol association with the Protocol-based VLAN entry.
1.3.6.1.4.1.2356.16.1.1.2.14.2.1.6ColumnagentProtocolGroupProtocolIPXread-writeobsoleteThe status of the IPX protocol association with the Protocol-based VLAN entry.
1.3.6.1.4.1.2356.16.1.1.2.14.2.1.7ColumnagentProtocolGroupStatusread-createcurrentThe status of the Protocol-based VLAN entry. active(1) - this entry is active createAndGo(4) - used to create a new entry destroy(6) - remove this entry
1.3.6.1.4.1.2356.16.1.1.2.14.3TableagentProtocolGroupPortTablenot-accessiblecurrentA table of the switch's physical port config entries
1.3.6.1.4.1.2356.16.1.1.2.14.3.1RowagentProtocolGroupPortEntrynot-accessiblecurrentSwitch's physical port config entry
1.3.6.1.4.1.2356.16.1.1.2.14.3.1.1ColumnagentProtocolGroupPortIfIndexread-onlycurrentThe interface number of this instance.
1.3.6.1.4.1.2356.16.1.1.2.14.3.1.2ColumnagentProtocolGroupPortStatusread-createcurrentThe status of this entry. active(1) - the port is associated with this group createAndGo(4) - add the port to this group createAndWait(5) - add the port to thi…
1.3.6.1.4.1.2356.16.1.1.2.14.4TableagentProtocolGroupProtocolTablenot-accessiblecurrentA table of the switch's physical port config entries
1.3.6.1.4.1.2356.16.1.1.2.14.4.1RowagentProtocolGroupProtocolEntrynot-accessiblecurrentSwitch's physical port config entry
1.3.6.1.4.1.2356.16.1.1.2.14.4.1.1ColumnagentProtocolGroupProtocolIDnot-accessiblecurrentThe protocol ID of this instance. The value for IP is 2048 (0x0800), ARP is 2054 (0x0806) and IPX is 33079 (0x8137). Other protocol Ids in the range 1536 to 65…
1.3.6.1.4.1.2356.16.1.1.2.14.4.1.2ColumnagentProtocolGroupProtocolStatusread-createcurrentThe status of this entry. active(1) - the port is associated with this group createAndGo(4) - add the port to this group createAndWait(5) - add the port to thi…
1.3.6.1.4.1.2356.16.1.1.2.15NodeagentStpSwitchConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.15.1ScalaragentStpConfigDigestKeyread-onlycurrentThe MST configuration digest key.
1.3.6.1.4.1.2356.16.1.1.2.15.2ScalaragentStpConfigFormatSelectorread-onlycurrentThe MST configuration format selector. A value other than 0 (zero) indicates non-support for the IEEE 802.1s standard.
1.3.6.1.4.1.2356.16.1.1.2.15.3ScalaragentStpConfigNameread-writecurrentThe MST configuration name of at most 32 characters.
1.3.6.1.4.1.2356.16.1.1.2.15.4ScalaragentStpConfigRevisionread-writecurrentThe MST configuration revision. The default value is 1.
1.3.6.1.4.1.2356.16.1.1.2.15.5ScalaragentStpForceVersionread-writecurrentThe MST configuration force protocol version. The default version is dot1s.
1.3.6.1.4.1.2356.16.1.1.2.15.6ScalaragentStpAdminModeread-writecurrentThe spanning tree operational status. enable(1) - enables spanning tree operational status on the switch. disable(2) - disables spanning tree operational statu…
1.3.6.1.4.1.2356.16.1.1.2.15.7TableagentStpPortTablenot-accessiblecurrentSTP port table.
1.3.6.1.4.1.2356.16.1.1.2.15.7.1RowagentStpPortEntrynot-accessiblecurrentSTP port entry.
1.3.6.1.4.1.2356.16.1.1.2.15.7.1.1ColumnagentStpPortStateread-writecurrentThe administrative STP state for the port. enable(1) - enables STP on the port. disable(2) - disables STP on the port. The default port STP state is enabled fo…
1.3.6.1.4.1.2356.16.1.1.2.15.7.1.2ColumnagentStpPortStatsMstpBpduRxread-onlycurrentThe MSTP BPDUs received on a specific port.
1.3.6.1.4.1.2356.16.1.1.2.15.7.1.3ColumnagentStpPortStatsMstpBpduTxread-onlycurrentThe MSTP BPDUs sent from a specific port.
1.3.6.1.4.1.2356.16.1.1.2.15.7.1.4ColumnagentStpPortStatsRstpBpduRxread-onlycurrentThe RSTP BPDUs received on a specific port.
1.3.6.1.4.1.2356.16.1.1.2.15.7.1.5ColumnagentStpPortStatsRstpBpduTxread-onlycurrentThe RSTP BPDUs sent from a specific port.
1.3.6.1.4.1.2356.16.1.1.2.15.7.1.6ColumnagentStpPortStatsStpBpduRxread-onlycurrentThe STP BPDUs received on a specific port.
1.3.6.1.4.1.2356.16.1.1.2.15.7.1.7ColumnagentStpPortStatsStpBpduTxread-onlycurrentThe STP BPDUs sent from a specific port.
1.3.6.1.4.1.2356.16.1.1.2.15.7.1.8ColumnagentStpPortStatsSstpBpduRxread-onlycurrentThe SSTP BPDUs received on a specific port.
1.3.6.1.4.1.2356.16.1.1.2.15.7.1.9ColumnagentStpPortStatsSstpBpduTxread-onlycurrentThe SSTP BPDUs sent from a specific port.
1.3.6.1.4.1.2356.16.1.1.2.15.7.1.10ColumnagentStpPortUpTimeread-onlycurrentTime since port was reset. It is displayed in days, hours, minutes, and seconds.
1.3.6.1.4.1.2356.16.1.1.2.15.7.1.11ColumnagentStpPortMigrationCheckread-writecurrentForce the specified port to transmit RSTP or MSTP BPDU's. Supported values: false(0) - BPDUs are not to be transmitted. true(1) - BPDUs are to be transmitted A…
1.3.6.1.4.1.2356.16.1.1.2.15.8NodeagentStpCstConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.15.8.1ScalaragentStpCstHelloTimeread-onlycurrentThe MSTP root port hello time for the CIST.
1.3.6.1.4.1.2356.16.1.1.2.15.8.2ScalaragentStpCstMaxAgeread-onlycurrentThe MSTP root port max age for the CIST.
1.3.6.1.4.1.2356.16.1.1.2.15.8.3ScalaragentStpCstRegionalRootIdread-onlycurrentThe MSTP regional root identifier for the CIST.
1.3.6.1.4.1.2356.16.1.1.2.15.8.4ScalaragentStpCstRegionalRootPathCostread-onlycurrentThe MSTP regional root path cost for the CIST.
1.3.6.1.4.1.2356.16.1.1.2.15.8.5ScalaragentStpCstRootFwdDelayread-onlycurrentThe MSTP root port forward delay for the CIST.
1.3.6.1.4.1.2356.16.1.1.2.15.8.6ScalaragentStpCstBridgeFwdDelayread-writecurrentThe MSTP bridge forward delay for the CIST. The default value is 15.
1.3.6.1.4.1.2356.16.1.1.2.15.8.7ScalaragentStpCstBridgeHelloTimeread-onlycurrentThe MSTP bridge hello time for the CIST. The default value is 2. According to IEEE 802.1Q-REV 2005 updating hello time is disallowed
1.3.6.1.4.1.2356.16.1.1.2.15.8.8ScalaragentStpCstBridgeHoldTimeread-onlycurrentThe MSTP bridge hold time for the CIST.
1.3.6.1.4.1.2356.16.1.1.2.15.8.9ScalaragentStpCstBridgeMaxAgeread-writecurrentThe MSTP bridge max age for the CIST. The default value is 20.
1.3.6.1.4.1.2356.16.1.1.2.15.8.10ScalaragentStpCstBridgeMaxHopsread-writecurrentThe MSTP bridge max hops for the CIST. The default value is 20.
1.3.6.1.4.1.2356.16.1.1.2.15.8.11ScalaragentStpCstBridgePriorityread-writecurrentThe MSTP bridge priority for the CIST. The default value is 32768.
1.3.6.1.4.1.2356.16.1.1.2.15.8.12ScalaragentStpCstBridgeHoldCountread-writecurrentThe MSTP bridge hold count for the CIST. This command sets the value of maximum bpdus that a bridge is allowed to send within a hello time window. The default …
1.3.6.1.4.1.2356.16.1.1.2.15.9TableagentStpCstPortTablenot-accessiblecurrentCIST port table.
1.3.6.1.4.1.2356.16.1.1.2.15.9.1RowagentStpCstPortEntrynot-accessiblecurrentCIST port entry.
1.3.6.1.4.1.2356.16.1.1.2.15.9.1.1ColumnagentStpCstPortOperEdgeread-onlycurrentThe MSTP operational status of a specific port for the CIST.
1.3.6.1.4.1.2356.16.1.1.2.15.9.1.2ColumnagentStpCstPortOperPointToPointread-onlycurrentThe MSTP operational point to point mac of a specific port for the CIST.
1.3.6.1.4.1.2356.16.1.1.2.15.9.1.3ColumnagentStpCstPortTopologyChangeAckread-onlycurrentThe MSTP topology change acknowledge for a specific port in the CIST.
1.3.6.1.4.1.2356.16.1.1.2.15.9.1.4ColumnagentStpCstPortEdgeread-writecurrentThe administrative state of a specific port in CIST. enable(1) - enables the port. disable(2) - disables the port. The default port state is disabled.
1.3.6.1.4.1.2356.16.1.1.2.15.9.1.5ColumnagentStpCstPortForwardingStateread-onlycurrentThe MSTP forwarding state of a specific port in CIST.
1.3.6.1.4.1.2356.16.1.1.2.15.9.1.6ColumnagentStpCstPortIdread-onlycurrentThe MSTP port identifier of a specific port in CIST.
1.3.6.1.4.1.2356.16.1.1.2.15.9.1.7ColumnagentStpCstPortPathCostread-writecurrentThe MSTP port path cost in CIST. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link s…
1.3.6.1.4.1.2356.16.1.1.2.15.9.1.8ColumnagentStpCstPortPriorityread-writecurrentThe MSTP port priority in CIST. The priority is in the increments of 16. The default value is 128.
1.3.6.1.4.1.2356.16.1.1.2.15.9.1.9ColumnagentStpCstDesignatedBridgeIdread-onlycurrentThe MSTP designated bridge ID of a specific port in CIST.
1.3.6.1.4.1.2356.16.1.1.2.15.9.1.10ColumnagentStpCstDesignatedCostread-onlycurrentThe MSTP designated cost of a specific port in CIST.
1.3.6.1.4.1.2356.16.1.1.2.15.9.1.11ColumnagentStpCstDesignatedPortIdread-onlycurrentThe MSTP designated port ID of a specific port in CIST.
1.3.6.1.4.1.2356.16.1.1.2.15.9.1.12ColumnagentStpCstExtPortPathCostread-writecurrentThe MSTP external port path cost in CIST. The default value varies depending upon the link speed.
1.3.6.1.4.1.2356.16.1.1.2.15.9.1.13ColumnagentStpCstPortBpduGuardEffectread-onlycurrentBPDU Guard Mode effect on the port. enable(1) - BPDU Guard Mode is enabled on the port. disable(2) - BPDU Guard Mode is disabled on the port.
1.3.6.1.4.1.2356.16.1.1.2.15.9.1.14ColumnagentStpCstPortBpduFilterread-writecurrentThis command sets BPDU Filter mode on the port. enable(1) - BPDU Filter Mode is enabled on the port. disable(2) - BPDU Filter Mode is disabled on the port.
1.3.6.1.4.1.2356.16.1.1.2.15.9.1.15ColumnagentStpCstPortBpduFloodread-writecurrentThis command sets BPDU Flood mode on the port. enable(1) - BPDU Flood Mode is enabled on the port. disable(2) - BPDU Flood Mode is disabled on the port.
1.3.6.1.4.1.2356.16.1.1.2.15.9.1.16ColumnagentStpCstPortAutoEdgeread-writecurrentThis command sets the auto-edge mode of the port which enables it to become an edge port if it does not see BPDUs for some duration. enable(1) - enables the au…
1.3.6.1.4.1.2356.16.1.1.2.15.9.1.17ColumnagentStpCstPortRootGuardread-writecurrentThis command sets a port to discard any superior information received by the port and thus protect against root of the device from changing.The port gets put i…
1.3.6.1.4.1.2356.16.1.1.2.15.9.1.18ColumnagentStpCstPortTCNGuardread-writecurrentThis command restricts the port from propagating any topology change information received through that port. enable(1) - enables the tcn-guard mode for the por…
1.3.6.1.4.1.2356.16.1.1.2.15.9.1.19ColumnagentStpCstPortLoopGuardread-writecurrentThis command enables loop guard on this port. This setting applies to all Spanning Tree instances of which this port is a member. enable(1) - enables the loop …
1.3.6.1.4.1.2356.16.1.1.2.15.10TableagentStpMstTablenot-accessiblecurrentMST table.
1.3.6.1.4.1.2356.16.1.1.2.15.10.1RowagentStpMstEntrynot-accessiblecurrentMST entry.
1.3.6.1.4.1.2356.16.1.1.2.15.10.1.1ColumnagentStpMstIdread-onlycurrentThe MSTP instance ID.
1.3.6.1.4.1.2356.16.1.1.2.15.10.1.2ColumnagentStpMstBridgePriorityread-writecurrentThe MSTP bridge priority in a specific instance. The priority is in the increments of 4096. The recommended default value is 32768.
1.3.6.1.4.1.2356.16.1.1.2.15.10.1.3ColumnagentStpMstBridgeIdentifierread-onlycurrentThe MSTP bridge identifier in a specific instance.
1.3.6.1.4.1.2356.16.1.1.2.15.10.1.4ColumnagentStpMstDesignatedRootIdread-onlycurrentThe MSTP designated root bridge identifier in a specific instance.
1.3.6.1.4.1.2356.16.1.1.2.15.10.1.5ColumnagentStpMstRootPathCostread-onlycurrentThe MSTP root path cost in a specific instance.
1.3.6.1.4.1.2356.16.1.1.2.15.10.1.6ColumnagentStpMstRootPortIdread-onlycurrentThe MSTP root port ID in a specific instance.
1.3.6.1.4.1.2356.16.1.1.2.15.10.1.7ColumnagentStpMstTimeSinceTopologyChangeread-onlycurrentThe MSTP time since the last topology change in a specific instance.
1.3.6.1.4.1.2356.16.1.1.2.15.10.1.8ColumnagentStpMstTopologyChangeCountread-onlycurrentThe MSTP count of topology changes in a specific instance.
1.3.6.1.4.1.2356.16.1.1.2.15.10.1.9ColumnagentStpMstTopologyChangeParmread-onlycurrentThe MSTP topology change parameter in a specific instance.
1.3.6.1.4.1.2356.16.1.1.2.15.10.1.10ColumnagentStpMstRowStatusread-createcurrentThe MSTP instance status. Supported values: active(1) - valid instance. createAndGo(4) - used to create a new instance. destroy(6) - removes an instance.
1.3.6.1.4.1.2356.16.1.1.2.15.11TableagentStpMstPortTablenot-accessiblecurrentMST port table.
1.3.6.1.4.1.2356.16.1.1.2.15.11.1RowagentStpMstPortEntrynot-accessiblecurrentMST port entry.
1.3.6.1.4.1.2356.16.1.1.2.15.11.1.1ColumnagentStpMstPortForwardingStateread-onlycurrentThe MSTP forwarding state of a specific port in a specific instance.
1.3.6.1.4.1.2356.16.1.1.2.15.11.1.2ColumnagentStpMstPortIdread-onlycurrentThe MSTP port identifier of a specific port in a specific instance.
1.3.6.1.4.1.2356.16.1.1.2.15.11.1.3ColumnagentStpMstPortPathCostread-writecurrentThe MSTP port path cost in a specific instance. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depend…
1.3.6.1.4.1.2356.16.1.1.2.15.11.1.4ColumnagentStpMstPortPriorityread-writecurrentThe MSTP port priority in a specific instance. The priority is in the increments of 16. The default value is 128.
1.3.6.1.4.1.2356.16.1.1.2.15.11.1.5ColumnagentStpMstDesignatedBridgeIdread-onlycurrentThe MSTP designated bridge ID of a specific port in a specific instance.
1.3.6.1.4.1.2356.16.1.1.2.15.11.1.6ColumnagentStpMstDesignatedCostread-onlycurrentThe MSTP designated cost of a specific port in a specific instance.
1.3.6.1.4.1.2356.16.1.1.2.15.11.1.7ColumnagentStpMstDesignatedPortIdread-onlycurrentThe MSTP designated port ID of a specific port in a specific instance.
1.3.6.1.4.1.2356.16.1.1.2.15.11.1.8ColumnagentStpMstPortLoopInconsistentStateread-onlycurrentThe loop inconsistent state of a specific port in a specific instance. This value can only report as true(1) when loop guard is enabled on the port and the por…
1.3.6.1.4.1.2356.16.1.1.2.15.11.1.9ColumnagentStpMstPortTransitionsIntoLoopInconsistentStateread-onlycurrentThe number of times this interface has transitioned into loop inconsistent state.
1.3.6.1.4.1.2356.16.1.1.2.15.11.1.10ColumnagentStpMstPortTransitionsOutOfLoopInconsistentStateread-onlycurrentThe number of times this interface has transitioned out of loop inconsistent state.
1.3.6.1.4.1.2356.16.1.1.2.15.12TableagentStpMstVlanTablenot-accessiblecurrentMST VLAN table.
1.3.6.1.4.1.2356.16.1.1.2.15.12.1RowagentStpMstVlanEntrynot-accessiblecurrentMST VLAN entry.
1.3.6.1.4.1.2356.16.1.1.2.15.12.1.1ColumnagentStpMstVlanRowStatusread-createcurrentThe association status of an MSTP instance and a VLAN. Supported values: active(1) - valid association between an MSTP instance and a VLAN. createAndGo(4) - us…
1.3.6.1.4.1.2356.16.1.1.2.15.13ScalaragentStpBpduGuardModeread-writecurrentThe spanning tree BPDU Guard Mode. enable(1) - enables BPDU Guard Mode on the switch. disable(2) - disables BPDU Guard Mode on the switch. The default status i…
1.3.6.1.4.1.2356.16.1.1.2.15.14ScalaragentStpBpduFilterDefaultread-writecurrentThe spanning tree BPDU Filter Mode, it enables BPDU Filter on all edge ports. enable(1) - enables BPDU Filter Mode on the switch. disable(2) - disables BPDU Fi…
1.3.6.1.4.1.2356.16.1.1.2.15.15NodeagentPvrstpSwitchConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.15.15.1ScalaragentPvstpAdminModeread-writecurrentThe per VLAN spanning tree operational status. enable(1) - enables PVSTP on the switch. disable(2) - disables PVSTP on the switch. The default status is disabl…
1.3.6.1.4.1.2356.16.1.1.2.15.15.2ScalaragentPvrstpAdminModeread-writecurrentThe per VLAN rapid spanning tree operational status. enable(1) - enables PVRSTP on the switch. disable(2) - disables PVRSTP on the switch. The default status i…
1.3.6.1.4.1.2356.16.1.1.2.15.15.3ScalaragentPvrstpUplinkFastread-writecurrentEnables or disabled uplink fast feature when switch is in PVST mode. enable(1) - enables UPLINK FAST on the switch. disable(2) - disables UPLINK FAST on the sw…
1.3.6.1.4.1.2356.16.1.1.2.15.15.4ScalaragentPvrstpBackboneFastread-writecurrentEnables or disabled backbone fast feature when switch is in PVST mode. enable(1) - enables BACKBONE FAST on the switch. disable(2) - disables BACKBONE FAST on …
1.3.6.1.4.1.2356.16.1.1.2.15.15.5TableagentPvrstpVlanTablenot-accessiblecurrentPVRSTP table containing PVRSTP per vlan entries.
1.3.6.1.4.1.2356.16.1.1.2.15.15.5.1RowagentPvrstpVlanEntrynot-accessiblecurrentPVRSTP vlan entry attributes.
1.3.6.1.4.1.2356.16.1.1.2.15.15.5.1.1ColumnagentPvrstpVlanTableIndexnot-accessiblecurrentIndex to PVRSTP vlan entry in PVRSTP vlan table.
1.3.6.1.4.1.2356.16.1.1.2.15.15.5.1.2ColumnagentPvrstpVlanRootPriSecread-writecurrentThe PVRSTP primary or secondary root for the VLAN instance.
1.3.6.1.4.1.2356.16.1.1.2.15.15.5.1.3ColumnagentPvrstpVlanHelloTimeread-writecurrentThe PVRSTP hello time for the VLAN instance.
1.3.6.1.4.1.2356.16.1.1.2.15.15.5.1.4ColumnagentPvrstpVlanFwdDelayTimeread-writecurrentThe PVRSTP forward delay for the VLAN instance.
1.3.6.1.4.1.2356.16.1.1.2.15.15.5.1.5ColumnagentPvrstpVlanMaxAgeTimeread-writecurrentThe PVRSTP max age for the VLAN instance.
1.3.6.1.4.1.2356.16.1.1.2.15.15.6TableagentPvrstpPortVlanTablenot-accessiblecurrentPVRSTP table containing PVRSTP per port per vlan entries.
1.3.6.1.4.1.2356.16.1.1.2.15.15.6.1RowagentPvrstpPortVlanEntrynot-accessiblecurrentPVRSTP port entry per vlan attributes.
1.3.6.1.4.1.2356.16.1.1.2.15.15.6.1.1ColumnagentPvrstpPortIndexnot-accessiblecurrentPort index to PVRSTP port entry in PVRSTP port vlan table.
1.3.6.1.4.1.2356.16.1.1.2.15.15.6.1.2ColumnagentPvrstpVlanIndexnot-accessiblecurrentVlan index to PVRSTP port entry in PVRSTP port vlan table.
1.3.6.1.4.1.2356.16.1.1.2.15.15.6.1.3ColumnagentPvrstpPortVlanPriorityread-writecurrentPVRSTP port vlan priority is in the range of 0 to 240. Port priority value should be a multiple of 16.
1.3.6.1.4.1.2356.16.1.1.2.15.15.6.1.4ColumnagentPvrstpVlanCostread-writecurrentPVRSTP port vlan cost is in the range of 0 to 200000000 ,for 0 its Auto.
1.3.6.1.4.1.2356.16.1.1.2.16NodeagentAuthenticationGroup
1.3.6.1.4.1.2356.16.1.1.2.16.1ScalaragentAuthenticationListCreateread-writedeprecatedAuthentication List Create If set to a non empty string, creates a new Authentication List for configuration.
1.3.6.1.4.1.2356.16.1.1.2.16.2TableagentAuthenticationListTablenot-accessibledeprecatedAuthentication List table.
1.3.6.1.4.1.2356.16.1.1.2.16.2.1RowagentAuthenticationListEntrynot-accessibledeprecatedAuthentication List entry.
1.3.6.1.4.1.2356.16.1.1.2.16.2.1.1ColumnagentAuthenticationListIndexnot-accessibledeprecatedAuthentication List Index Unique number used for indexing into this table.
1.3.6.1.4.1.2356.16.1.1.2.16.2.1.2ColumnagentAuthenticationListNameread-onlydeprecatedAuthentication List Name Unique name used to identify the Authentication List from other tables.
1.3.6.1.4.1.2356.16.1.1.2.16.2.1.3ColumnagentAuthenticationListMethod1read-writedeprecatedAuthentication List Method 1 Configures the first authentication method to use when this list is specified.
1.3.6.1.4.1.2356.16.1.1.2.16.2.1.4ColumnagentAuthenticationListMethod2read-writedeprecatedAuthentication List Method 2 Configures the second authentication method to use when this list is specified.
1.3.6.1.4.1.2356.16.1.1.2.16.2.1.5ColumnagentAuthenticationListMethod3read-writedeprecatedAuthentication List Method 3 Configures the third authentication method to use when this list is specified.
1.3.6.1.4.1.2356.16.1.1.2.16.2.1.6ColumnagentAuthenticationListStatusread-writedeprecatedThe status of the Authentication List. Supported values: active(1) - indicates a valid Authenticaiton List destroy(6) - removes the Authentication List.
1.3.6.1.4.1.2356.16.1.1.2.16.2.1.7ColumnagentAuthenticationListMethod4read-writedeprecatedAuthentication List Method 4 Configures the fourth authentication method to use when this list is specified.
1.3.6.1.4.1.2356.16.1.1.2.16.2.1.8ColumnagentAuthenticationListMethod5read-writedeprecatedAuthentication List Method 5 Configures the fifth authentication method to use when this list is specified.
1.3.6.1.4.1.2356.16.1.1.2.16.3ScalaragentUserConfigDefaultAuthenticationListread-writecurrentDefault Authentication List This object configures which authentication list to use for users which do not have an Authentication List configured. The list mus…
1.3.6.1.4.1.2356.16.1.1.2.16.4TableagentUserAuthenticationConfigTablenot-accessiblecurrentUser Authentication Config Table
1.3.6.1.4.1.2356.16.1.1.2.16.4.1RowagentUserAuthenticationConfigEntrynot-accessiblecurrentUser Authentication Config Entry
1.3.6.1.4.1.2356.16.1.1.2.16.4.1.1ColumnagentUserAuthenticationListread-writecurrentUser Authentication List This object configures which authentication list to use for this user. The list must be configured before setting.
1.3.6.1.4.1.2356.16.1.1.2.16.5TableagentUserPortConfigTablenot-accessiblecurrentUser Port Config Table
1.3.6.1.4.1.2356.16.1.1.2.16.5.1RowagentUserPortConfigEntrynot-accessiblecurrentUser Port Config Entry
1.3.6.1.4.1.2356.16.1.1.2.16.5.1.1ColumnagentUserPortSecurityread-writecurrentUser Port Port Security This object configures which ports the user has access to. Ports are indexed based on dot1dBasePort entries in dot1dBasePortTable.
1.3.6.1.4.1.2356.16.1.1.2.17NodeagentClassOfServiceGroup
1.3.6.1.4.1.2356.16.1.1.2.17.1TableagentClassOfServicePortTablenot-accessiblecurrentA table that contains information about the 802.1p priority mapping to traffic class priority queue for every physical port.
1.3.6.1.4.1.2356.16.1.1.2.17.1.1RowagentClassOfServicePortEntrynot-accessiblecurrentA 802.1p priority mapped to a traffic class priority queue.
1.3.6.1.4.1.2356.16.1.1.2.17.1.1.1ColumnagentClassOfServicePortPrioritynot-accessiblecurrentThe Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated …
1.3.6.1.4.1.2356.16.1.1.2.17.1.1.2ColumnagentClassOfServicePortClassread-writecurrentTraffic class priority queue the received frame is mapped to.
1.3.6.1.4.1.2356.16.1.1.2.18NodeagentHTTPConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.18.1ScalaragentHTTPWebModeread-writecurrentConfigures the HTTP server admin mode
1.3.6.1.4.1.2356.16.1.1.2.18.2ScalaragentHTTPJavaModeread-writeobsoleteThis object is obsolete as Java Mode is no longer supported.
1.3.6.1.4.1.2356.16.1.1.2.18.3ScalaragentHTTPMaxSessionsread-writecurrentConfigures the maximum number of allowable HTTP sessions. The default value is 16.
1.3.6.1.4.1.2356.16.1.1.2.18.4ScalaragentHTTPHardTimeoutread-writecurrentConfigures the hard timeout for HTTP sessions in hours. The default value is 24 hours.
1.3.6.1.4.1.2356.16.1.1.2.18.5ScalaragentHTTPSoftTimeoutread-writecurrentConfigures the soft (activity) timeout for HTTP sessions in minutes. The default value is 5 minutes.
1.3.6.1.4.1.2356.16.1.1.2.18.6ScalaragentHTTPWebMgmtPortNumread-writecurrentGet/Set the TCP port number that the HTTP server listens to for incoming requests. The port number is an integer value from 1025 to 65535. Before setting this …
1.3.6.1.4.1.2356.16.1.1.2.18.100ScalaragentHTTPRedirectModeread-writecurrentConfigures the HTTP to HTTPS redirect mode
1.3.6.1.4.1.2356.16.1.1.2.20NodeagentExecAccountingGroup
1.3.6.1.4.1.2356.16.1.1.2.20.1ScalaragentExecAccountingListCreateread-writedeprecatedExecAccounting List Create if set to a non empty string, creates a new ExecAccounting List for configuration.
1.3.6.1.4.1.2356.16.1.1.2.20.2TableagentExecAccountingListTablenot-accessibledeprecatedExecAccounting Method List table.
1.3.6.1.4.1.2356.16.1.1.2.20.2.1RowagentExecAccountingListEntrynot-accessibledeprecatedExecAccounting Method List Entry.
1.3.6.1.4.1.2356.16.1.1.2.20.2.1.1ColumnagentExecAccountingListIndexnot-accessibledeprecatedExecAccounting List Index Unique number used for indexing into this table.
1.3.6.1.4.1.2356.16.1.1.2.20.2.1.2ColumnagentExecAccountingListNameread-onlydeprecatedUnique name used to identify the ExecAccounting List from other tables.
1.3.6.1.4.1.2356.16.1.1.2.20.2.1.3ColumnagentExecAccountingMethodTyperead-writedeprecatedExecAccounting Method Type Configures the method type to use when this ExecAccounting list is specified.
1.3.6.1.4.1.2356.16.1.1.2.20.2.1.4ColumnagentExecAccountingListMethod1read-writedeprecatedExecAccounting List Method 1 Configures the authentication method to use when this list is specified.
1.3.6.1.4.1.2356.16.1.1.2.20.2.1.5ColumnagentExecAccountingListMethod2read-writedeprecatedExecAccounting List Method 2 Configures the authentication method to use when this list is specified.
1.3.6.1.4.1.2356.16.1.1.2.20.2.1.6ColumnagentExecAccountingListStatusread-writedeprecatedThe status of the ExecAccounting List. Supported values: active(1) - indicates a valid ExecAccounting List destroy(6) - removes the ExecAccounting List.
1.3.6.1.4.1.2356.16.1.1.2.21NodeagentCmdsAccountingGroup
1.3.6.1.4.1.2356.16.1.1.2.21.1ScalaragentCmdsAccountingListCreateread-writedeprecatedCmdsAccounting List Create if set to a non empty string, creates a new CmdsAccounting List for configuration.
1.3.6.1.4.1.2356.16.1.1.2.21.2TableagentCmdsAccountingListTablenot-accessibledeprecatedCmdsAccounting Method List table.
1.3.6.1.4.1.2356.16.1.1.2.21.2.1RowagentCmdsAccountingListEntrynot-accessibledeprecatedCmdsAccounting Method List Entry.
1.3.6.1.4.1.2356.16.1.1.2.21.2.1.1ColumnagentCmdsAccountingListIndexnot-accessibledeprecatedCmdsAccounting List Index Unique number used for indexing into this table.
1.3.6.1.4.1.2356.16.1.1.2.21.2.1.2ColumnagentCmdsAccountingListNameread-onlydeprecatedUnique name used to identify the CmdsAccounting List from other tables.
1.3.6.1.4.1.2356.16.1.1.2.21.2.1.3ColumnagentCmdsAccountingMethodTyperead-writedeprecatedCmdsAccounting Method Type Configures the method type to use when this CmdsAccounting list is specified.
1.3.6.1.4.1.2356.16.1.1.2.21.2.1.4ColumnagentCmdsAccountingListMethod1read-writedeprecatedCmdsAccounting List Method 1 Configures the authentication method to use when this list is specified.
1.3.6.1.4.1.2356.16.1.1.2.21.2.1.5ColumnagentCmdsAccountingListStatusread-writedeprecatedThe status of the CmdsAccounting List. Supported values: active(1) - indicates a valid CmdsAccounting List destroy(6) - removes the CmdsAccounting List.
1.3.6.1.4.1.2356.16.1.1.2.22NodeagentDDisableAutorecoveryConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.22.1ScalaragentDDisableAutorecoveryStatusread-writecurrentEnable/Disable the D-Disable Autorecovery feature for all causes.
1.3.6.1.4.1.2356.16.1.1.2.22.2ScalaragentDDisableAutorecoveryTimeoutread-writecurrentTimeout to autorecovery from D-Disable port state.
1.3.6.1.4.1.2356.16.1.1.2.22.3ScalaragentDDisableAutorecoveryCauseread-writecurrentEnable/Disable the D-Disable Autorecovery feature for a particular cause.
1.3.6.1.4.1.2356.16.1.1.2.23NodeagentCmdsAuthorizationGroup
1.3.6.1.4.1.2356.16.1.1.2.23.1ScalaragentCmdsAuthorizationListCreateread-writedeprecatedCommand Authorization List Create. If set to a non empty string, creates a new Command Authorization List for configuration. List name must contain Alphanumeri…
1.3.6.1.4.1.2356.16.1.1.2.23.2TableagentCmdsAuthorizationListTablenot-accessibledeprecatedCommand Authorization Method List table.
1.3.6.1.4.1.2356.16.1.1.2.23.2.1RowagentCmdsAuthorizationListEntrynot-accessibledeprecatedCommand Authorization Method List Entry.
1.3.6.1.4.1.2356.16.1.1.2.23.2.1.1ColumnagentCmdsAuthorizationListIndexnot-accessibledeprecatedCommand Authorization List Index Unique number used for indexing into this table.
1.3.6.1.4.1.2356.16.1.1.2.23.2.1.2ColumnagentCmdsAuthorizationListNameread-onlydeprecatedCommand Authorization List Name Unique name used to identify the Command Authorization List from other tables.
1.3.6.1.4.1.2356.16.1.1.2.23.2.1.3ColumnagentCmdsAuthorizationListStatusread-writedeprecatedThe status of the CmdsAuthorization List. Supported values: active(1) - indicates a valid CmdsAuthorization List destroy(6) - removes the CmdsAuthorization Lis…
1.3.6.1.4.1.2356.16.1.1.2.23.2.1.4ColumnagentCmdsAuthorizationListMethod1read-writedeprecatedCommand Authorization List Method1 Configures the Command Authorization method to use when this list is specified.
1.3.6.1.4.1.2356.16.1.1.2.23.2.1.5ColumnagentCmdsAuthorizationListMethod2read-writedeprecatedCommand Authorization List Method2 Configures the Command Authorization method to use when this list is specified.
1.3.6.1.4.1.2356.16.1.1.2.23.2.1.6ColumnagentCmdsAuthorizationListMethod3read-writedeprecatedCommand Authorization List Method2 Configures the Command Authorization method to use when this list is specified.
1.3.6.1.4.1.2356.16.1.1.2.24NodeagentExecAuthorizationGroup
1.3.6.1.4.1.2356.16.1.1.2.24.1ScalaragentExecAuthorizationListCreateread-writedeprecatedExec Authorization List Create. If set to a non empty string, creates a new Exec Authorization List for configuration. List name must contain Alphanumeric char…
1.3.6.1.4.1.2356.16.1.1.2.24.2TableagentExecAuthorizationListTablenot-accessibledeprecatedExec Authorization Method List table.
1.3.6.1.4.1.2356.16.1.1.2.24.2.1RowagentExecAuthorizationListEntrynot-accessibledeprecatedExec Authorization Method List Entry.
1.3.6.1.4.1.2356.16.1.1.2.24.2.1.1ColumnagentExecAuthorizationListIndexnot-accessibledeprecatedExec Authorization List Index Unique number used for indexing into this table.
1.3.6.1.4.1.2356.16.1.1.2.24.2.1.2ColumnagentExecAuthorizationListNameread-onlydeprecatedExec Authorization List Name Unique name used to identify the Exec Authorization List from other tables.
1.3.6.1.4.1.2356.16.1.1.2.24.2.1.3ColumnagentExecAuthorizationListStatusread-writedeprecatedThe status of the ExecAuthorization List. Supported values: active(1) - indicates a valid ExecAuthorization List destroy(6) - removes the ExecAuthorization Lis…
1.3.6.1.4.1.2356.16.1.1.2.24.2.1.4ColumnagentExecAuthorizationListMethod1read-writedeprecatedExec Authorization List Method1 Configures the Exec Authorization method to use when this list is specified.
1.3.6.1.4.1.2356.16.1.1.2.24.2.1.5ColumnagentExecAuthorizationListMethod2read-writedeprecatedExec Authorization List Method2 Configures the Exec Authorization method to use when this list is specified.
1.3.6.1.4.1.2356.16.1.1.2.24.2.1.6ColumnagentExecAuthorizationListMethod3read-writedeprecatedExec Authorization List Method3 Configures the Exec Authorization method to use when this list is specified.
1.3.6.1.4.1.2356.16.1.1.2.24.2.1.7ColumnagentExecAuthorizationListMethod4read-writedeprecatedExec Authorization List Method4 Configures the Exec Authorization method to use when this list is specified.
1.3.6.1.4.1.2356.16.1.1.2.25NodeagentSwitchMbufConfigGroup
1.3.6.1.4.1.2356.16.1.1.2.25.1ScalaragentSwitchMbufRisingThresholdread-writecurrentThe Mbuf utilization rising threshold in percentage. A single notification (rising event) is generated when the total Mbuf utilization exceeds this threshold. …
1.3.6.1.4.1.2356.16.1.1.2.25.2ScalaragentSwitchMbufFallingThresholdread-writecurrentThe Mbuf utilization falling threshold in percentage. A single notification (falling event) is generated when the total Mbuf utilization falls below this thres…
1.3.6.1.4.1.2356.16.1.1.2.25.3ScalaragentSwitchMbufNotificationSeverityread-writecurrentSeverity level while notification is generated for rising and falling threshold.
1.3.6.1.4.1.2356.16.1.1.2.27NodeagentLinkDependencyGroup
1.3.6.1.4.1.2356.16.1.1.2.27.1TableagentLinkDependencyGroupTablenot-accessiblecurrentA table for link dependencies entries.
1.3.6.1.4.1.2356.16.1.1.2.27.1.1RowagentLinkDependencyGroupEntrynot-accessiblecurrentLink Dependency Group Entry.
1.3.6.1.4.1.2356.16.1.1.2.27.1.1.1ColumnagentLinkDependencyGroupIndexnot-accessiblecurrentGroup identifier of the Link Dependency entry. All group entries exists on the switch and they are not configured. Groups are configured only when downstream p…
1.3.6.1.4.1.2356.16.1.1.2.27.1.1.2ColumnagentLinkDependencyGroupStatusread-writecurrentThe status of this entry. active(1) - the group has a valid configuration notReady(3) - the group has an incomplete configuration destroy(6) - remove the group…
1.3.6.1.4.1.2356.16.1.1.2.27.1.1.3ColumnagentLinkDependencyGroupDownstreamPortMaskread-createcurrentDownstream Port Mask. This mask defines the downstream ports of this group. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePo…
1.3.6.1.4.1.2356.16.1.1.2.27.1.1.4ColumnagentLinkDependencyGroupUpstreamPortMaskread-createcurrentUpstream Upon Port Mask. This mask defines the upstream ports upon which the downstream ports of this group depend. To obtain port numbers from interface numbe…
1.3.6.1.4.1.2356.16.1.1.2.27.1.1.5ColumnagentLinkDependencyGroupActionread-writecurrentGroup action refers to action taken by the downstream ports when the upstream ports go down. LINK-DOWN(0) downstream ports go down when upstream ports goes dow…
1.3.6.1.4.1.2356.16.1.1.2.27.1.1.6ColumnagentLinkDependencyGroupStatTransCounterread-onlycurrentThis is a count of the number of times the group has change state as a result of the upstream interfaces go down/up.
1.3.6.1.4.1.2356.16.1.1.2.27.1.1.7ColumnagentLinkDependencyGroupStatTransTimeLastread-onlycurrentThis is a last time of the group transition changes.
1.3.6.1.4.1.2356.16.1.1.2.28NodeagentDynamicAuthorizationGroup
1.3.6.1.4.1.2356.16.1.1.2.28.1ScalaragentDynamicAuthorizationModeread-writecurrentConfigures the Dynamic Authorization mode which must be enabled to support CoA functionality.
1.3.6.1.4.1.2356.16.1.1.2.28.2ScalaragentDynamicAuthorizationServerKeyread-writecurrentConfigures a global shared secret that is used for all dynamic authorization clients that do not have an individual shared secret key configured. If agentDynam…
1.3.6.1.4.1.2356.16.1.1.2.28.3ScalaragentDynamicAuthorizationEncryptServerKeyread-writecurrentSpecifies whether the global shared secret configured is to be encrypted or not. Set this in conjnction with agentDynamicAuthorizationServerKey.
1.3.6.1.4.1.2356.16.1.1.2.28.4ScalaragentDynamicAuthorizationPortNumread-writecurrentConfigures UDP port on which a device listens for RADIUS requests from configured RADIUS clients. The default port number is 3799. The supported range for the …
1.3.6.1.4.1.2356.16.1.1.2.28.5ScalaragentDynamicAuthorizationTyperead-writecurrentConfigures the type of authorization that the device must use for RADIUS clients. The client must match the configured attributes for authorization.
1.3.6.1.4.1.2356.16.1.1.2.28.6ScalaragentDynamicAuthorizationIgnoreSessionKeyread-writecurrentSpecifies whether the session-key is to be ignored or not.
1.3.6.1.4.1.2356.16.1.1.2.28.7ScalaragentDynamicAuthorizationIgnoreServerKeyread-writecurrentSpecifies whether the server-key is to be ignored or not.
1.3.6.1.4.1.2356.16.1.1.2.28.8TableagentDynamicAuthorizationClientTablenot-accessiblecurrentA table of the Dynamic Authorization Client entries
1.3.6.1.4.1.2356.16.1.1.2.28.8.1RowagentDynamicAuthorizationClientEntrynot-accessiblecurrentRepresents entry for a set of Dynamic Authorization Clients
1.3.6.1.4.1.2356.16.1.1.2.28.8.1.1ColumnagentDynamicAuthorizationClientAddressnot-accessiblecurrentConfigures a Dynamic Authorization Client IP Address or Hostname.
1.3.6.1.4.1.2356.16.1.1.2.28.8.1.2ColumnagentDynamicAuthorizationClientServerKeyread-createcurrentConfigures a Dynamic Authorization Client Server Key. If agentDynamicAuthorizationClientEncryptServerKey is set to true, then the length of this string has to …
1.3.6.1.4.1.2356.16.1.1.2.28.8.1.3ColumnagentDynamicAuthorizationClientEncryptServerKeyread-createcurrentSpecifies whether the client server-key configured is to be encrypted or not.Set this in conjunction with agentDynamicAuthorizationClientServerKey.
1.3.6.1.4.1.2356.16.1.1.2.28.8.1.4ColumnagentDynamicAuthorizationClientRowStatusread-createcurrentThe status of this conceptual row. active(1) - this client is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to…
1.3.6.1.4.1.2356.16.1.1.2.28.9ScalaragentDynamicAuthorizationStatsClearread-writecurrentWhen set to enable(1), all dynamic authorization statistics will be reset.
1.3.6.1.4.1.2356.16.1.1.2.28.10ScalaragentDynamicAuthorizationIgnoreBouncePortCommandread-writecurrentSpecifies whether the CoA bounce port request will be ignored or not.
1.3.6.1.4.1.2356.16.1.1.2.28.11ScalaragentDynamicAuthorizationIgnoreDisablePortCommandread-writecurrentSpecifies whether the CoA disable port request will be ignored or not.
1.3.6.1.4.1.2356.16.1.1.2.31TableagentKeepalivePortTablenot-accessiblecurrentKeepalive port table.
1.3.6.1.4.1.2356.16.1.1.2.31.1RowagentKeepalivePortEntrynot-accessiblecurrentKeep alive port table.
1.3.6.1.4.1.2356.16.1.1.2.31.1.1ColumnagentKeepalivePortStateread-writecurrentThe keepalive state for the port. enable(1) - enables keepalive on the port. disable(2) - disables keepalive on the port. The default port keepalive state is d…
1.3.6.1.4.1.2356.16.1.1.2.31.1.2ColumnagentKeepalivePortLoopDetectedread-onlycurrentKeepalive status for the port. yes (1) - loop detected on the port. no (2) - no loop detected on the port.
1.3.6.1.4.1.2356.16.1.1.2.31.1.3ColumnagentKeepalivePortLoopCountread-onlycurrentThe loop count on a specific port.
1.3.6.1.4.1.2356.16.1.1.2.31.1.4ColumnagentKeepalivePortTimeSinceLastLoopread-onlyobsoleteTime since last loop detected on the port.
1.3.6.1.4.1.2356.16.1.1.2.31.1.5ColumnagentKeepalivePortRxActionread-writecurrentAction on detecting a loop on the port. log-msg (1) - log a message. shutdown (2) - shutdown the port. log-shutdown (3) - log message and shutdown the port.
1.3.6.1.4.1.2356.16.1.1.2.31.1.6ColumnagentKeepalivePortStatusread-onlycurrentPort status. enable (1) - port is enabled. disable (2) - port is disabled. diag-disable (3) - port is diagnostic disabled.
1.3.6.1.4.1.2356.16.1.1.2.31.1.7ColumnagentKeepalivePortLastLoopDetectedTimeread-onlycurrentTimeStamp when last loop was detected on a port.
1.3.6.1.4.1.2356.16.1.1.2.31.1.8ColumnagentKeepalivePortTpidTyperead-writecurrentType of TPID to be used for loop protection or None if no vlan based loop protection is required.
1.3.6.1.4.1.2356.16.1.1.2.31.1.9ColumnagentKeepalivePortVlanIdread-writecurrentVlan Id to be used for loop protection or None if no vlan based loop protection is required.
1.3.6.1.4.1.2356.16.1.1.2.40NodeagentpdPoeGroup
1.3.6.1.4.1.2356.16.1.1.2.40.1NodeagentpdPoeStatus
1.3.6.1.4.1.2356.16.1.1.2.40.1.1TableagentpdPoeStatusTablenot-accessiblecurrentA table for pdpoe port status and associated functionality.
1.3.6.1.4.1.2356.16.1.1.2.40.1.1.1RowagentpdPoeStatusEntrynot-accessiblecurrentRepresents entry for pdpoe port status table
1.3.6.1.4.1.2356.16.1.1.2.40.1.1.1.1ColumnagentpdPoeStatusPDclassread-onlycurrent0: Max. power 15.4 W, 1: Max. power 4.0 W, 2: Max. power 7.0 W, 3: Max. power 15.4 W, 4: Max. power 30.0 W.
1.3.6.1.4.1.2356.16.1.1.2.40.1.1.1.2ColumnagentpdPoeStatusPowerRequestedread-onlycurrentThe Power Requested shows the requested amount of power the PD wants to be reserved.
1.3.6.1.4.1.2356.16.1.1.2.40.1.1.1.3ColumnagentpdPoeStatusPowerAllocatedread-onlycurrentThe Power Allocated shows the amount of power the switch has allocated for the PD.
1.3.6.1.4.1.2356.16.1.1.2.40.1.1.1.4ColumnagentpdPoeStatusPowerUsedread-onlycurrentThe Power Used shows how much power the PD currently is using.
1.3.6.1.4.1.2356.16.1.1.2.40.1.1.1.5ColumnagentpdPoeStatusCurrentUsedread-onlycurrentThe Power Used shows how much current the PD currently is using.
1.3.6.1.4.1.2356.16.1.1.2.40.1.1.1.6ColumnagentpdPoeStatusPriorityread-onlycurrentThe Priority shows the port's priority configured by the user.
1.3.6.1.4.1.2356.16.1.1.2.40.1.1.1.7ColumnagentpdPoeStatusPortStatusread-onlycurrentThe Port Status shows the port's status.
1.3.6.1.4.1.2356.16.1.1.2.40.1.2ScalaragentpdPoeStatusTotalPowerRequestedread-onlycurrentTotal Power Requested.
1.3.6.1.4.1.2356.16.1.1.2.40.1.3ScalaragentpdPoeStatusTotalPowerAllocatedread-onlycurrentTotal Power allocated.
1.3.6.1.4.1.2356.16.1.1.2.40.1.4ScalaragentpdPoeStatusTotalPowerUsedread-onlycurrentTotal Power Used.
1.3.6.1.4.1.2356.16.1.1.2.40.1.5ScalaragentpdPoeStatusTotalCurrentUsedread-onlycurrentTotal Current Used.
1.3.6.1.4.1.2356.16.1.1.2.40.3NodeagentpdPoeAutoCheck
1.3.6.1.4.1.2356.16.1.1.2.40.3.1ScalaragentpdPoeAutoCheckPingCheckread-writecurrentconnection between PoE port and power device. 0: disable, 1: enable, default: disable.
1.3.6.1.4.1.2356.16.1.1.2.40.3.2TableagentpdPoeAutoCheckTablenot-accessiblecurrentConfigure PoE Auto check mode.
1.3.6.1.4.1.2356.16.1.1.2.40.3.2.1RowagentpdPoeAutoCheckEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.16.1.1.2.40.3.2.1.1ColumnagentpdPoeAutoCheckPingIPAddressread-writecurrentIP Address the system should ping. default: 0.0.0.0 .
1.3.6.1.4.1.2356.16.1.1.2.40.3.2.1.2ColumnagentpdPoeAutoCheckStartupTimeread-writecurrentWhen PD has been start up, the Switch will wait Start up time to do PoE Auto Checking. default: 60, range: 30-600 sec.
1.3.6.1.4.1.2356.16.1.1.2.40.3.2.1.3ColumnagentpdPoeAutoCheckIntervalTimeread-writecurrentDevice will send checking message to PD each interval time. default: 30, range: 10-120 sec.
1.3.6.1.4.1.2356.16.1.1.2.40.3.2.1.4ColumnagentpdPoeAutoCheckRetryTimeread-writecurrentIt will retry to send detection again. default: 3, range: 1-5.
1.3.6.1.4.1.2356.16.1.1.2.40.3.2.1.5ColumnagentpdPoeAutoCheckFailureLogread-onlycurrentFailure loggings counter.
1.3.6.1.4.1.2356.16.1.1.2.40.3.2.1.6ColumnagentpdPoeAutoCheckFailureActionread-writecurrentIt will retry to send detection again, 0: Nothing, 1: Reboot Remote PD, default: Nothing.
1.3.6.1.4.1.2356.16.1.1.2.40.3.2.1.7ColumnagentpdPoeAutoCheckRebootTimeread-writecurrentWhen PD has been rebooted, the PoE port restored power after the specified time. default: 15, range: 3-120 sec.
1.3.6.1.4.1.2356.16.1.1.2.40.3.2.1.8ColumnagentpdPoeAutoCheckMaxRebootTimesread-writecurrentWhen Failure Action is Reboot Remote PD, it limits times of Reboot. default: 3, range: 0-10. 0 means without reboot limits.
1.3.6.1.4.1.2356.16.1.1.2.40.4NodeagentpdPoeScheduling
1.3.6.1.4.1.2356.16.1.1.2.40.4.1ScalaragentpdPoeSchedulingProfileNumberread-writecurrentSpecify the PoE Profile Number that want to configure. Range:1-16
1.3.6.1.4.1.2356.16.1.1.2.40.4.2ScalaragentpdPoeSchedulingPorofileNameread-writecurrentProfile Name. Maximum length:32.
1.3.6.1.4.1.2356.16.1.1.2.40.4.3TableagentpdPoeSchedulingTimeTablenot-accessiblecurrentShow Poe Scheduling Time Config.
1.3.6.1.4.1.2356.16.1.1.2.40.4.3.1RowagentpdPoeSchedulingTimeEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.16.1.1.2.40.4.3.1.1ColumnagentpdPoeSchedulingTimeWeekIndexnot-accessiblecurrentWeek Index. 1: Mon, 2:Tue, 3: Wed, 4: Thu, 5: Fri, 6: Sat, 7: Sun
1.3.6.1.4.1.2356.16.1.1.2.40.4.3.1.2ColumnagentpdPoeSchedulingTimeStartTimeHourMinuteread-writecurrentPoE Scheduling Start Time. Format: HH:MM. Hour Range: 0-23. Minute Range:0,5,10,...,55.
1.3.6.1.4.1.2356.16.1.1.2.40.4.3.1.3ColumnagentpdPoeSchedulingTimeEndTimeHourMinuteread-writecurrentPoE Scheduling End Time. Format: HH:MM. Hour Range: 0-23. Minute Range:0,5,10,...,55.
1.3.6.1.4.1.2356.16.1.1.2.40.5NodeagentpdPoeConfiguration
1.3.6.1.4.1.2356.16.1.1.2.40.5.1ScalaragentpdPoeConfigurationPowerManagementModeread-writecurrentThe power management mode for PoE port. 0: CLASS_RESERVED, 1: CLASS_CONSUMP, 2: ALLOCATED_RESERVED, 3: ALLOCATED_CONSUMP, 4: LLDPMED_RESERVED, 5: LLDPMED_CONSU…
1.3.6.1.4.1.2356.16.1.1.2.40.5.2ScalaragentpdPoeConfigurationLegacyPDDetectionread-writecurrentThe capacitor detection mode. 0: Disable 1: Enable
1.3.6.1.4.1.2356.16.1.1.2.40.5.3ScalaragentpdPoeConfigurationPoEFirmwareVersionread-onlycurrentPoE Firmware Version.
1.3.6.1.4.1.2356.16.1.1.2.40.5.4ScalaragentpdPoeConfigurationPrimaryPowerSupplyread-onlycurrentIt must be defined what amount of power the primary and backup power sources can deliver.
1.3.6.1.4.1.2356.16.1.1.2.40.5.5TableagentpdPoeConfigurationPortTablenot-accessiblecurrentConfigure PoE Port Configuration mode.
1.3.6.1.4.1.2356.16.1.1.2.40.5.5.1RowagentpdPoeConfigurationPortEntrynot-accessiblecurrent
1.3.6.1.4.1.2356.16.1.1.2.40.5.5.1.1ColumnagentpdPoeConfigurationPortPoEModeread-writecurrentThe PoE Mode represents the PoE operating mode for the port. 0: Disable, 1: Enable, default: Enable.
1.3.6.1.4.1.2356.16.1.1.2.40.5.5.1.2ColumnagentpdPoeConfigurationPortPriorityread-writecurrentThe Priority represents the ports priority. There are three levels of power priority named Low, High and Critical. 0: Low, 1: High, 2: Critical, default: Low.
1.3.6.1.4.1.2356.16.1.1.2.40.5.5.1.3ColumnagentpdPoeConfigurationPortMaximumPowerread-writecurrentThe Maximum Power value contains a numerical value that indicates the maximum power in watts that can be delivered to a remote device. default: 30
1.3.6.1.4.1.2356.16.1.1.2.40.5.5.1.4ColumnagentpdPoeConfigurationPortScheduleread-writecurrentSpecify a valid PoE schedule profile by profile name. disabled: disable profile schedule.
1.3.6.1.4.1.2356.16.1.1.2.40.5.5.1.5ColumnagentpdPoeConfigurationPortDelayModeread-writecurrentTurn on off the power delay function. 0: Disable 1: Enable
1.3.6.1.4.1.2356.16.1.1.2.40.5.5.1.6ColumnagentpdPoeConfigurationPortDelayTimeread-writecurrentWhen rebooting, the PoE port will start to provide power to the PD when it out of delay time. Range:0-300
1.3.6.1.4.1.2356.16.1.1.3NodeagentSystemGroup
1.3.6.1.4.1.2356.16.1.1.3.1ScalaragentSaveConfigread-writecurrentenable(1) will initiate an configuration save to nvram. Status is returned by the object agentSaveConfigStatus.
1.3.6.1.4.1.2356.16.1.1.3.2ScalaragentClearConfigread-writecurrentclear config to factory defaults
1.3.6.1.4.1.2356.16.1.1.3.4ScalaragentClearLoginSessionsread-writecurrentclose all telnet sessions
1.3.6.1.4.1.2356.16.1.1.3.5ScalaragentClearPasswordsread-writecurrentreset passwords
1.3.6.1.4.1.2356.16.1.1.3.6ScalaragentClearPortStatsread-writecurrentclear all port statistics
1.3.6.1.4.1.2356.16.1.1.3.7ScalaragentClearSwitchStatsread-writecurrentclear all switch statistics
1.3.6.1.4.1.2356.16.1.1.3.8ScalaragentClearTrapLogread-writecurrentclear trap log
1.3.6.1.4.1.2356.16.1.1.3.9ScalaragentClearVlanread-writecurrentclear vlan entries
1.3.6.1.4.1.2356.16.1.1.3.10ScalaragentResetSystemread-writecurrentResets the switch. This object is not valid for stacking platforms.
1.3.6.1.4.1.2356.16.1.1.3.11ScalaragentSaveConfigStatusread-onlycurrentIndicates the current status of an save configuration request.
1.3.6.1.4.1.2356.16.1.1.3.12ScalaragentStartupConfigEraseread-writecurrentErase the text-based configuration named startup-config stored in non-volatile memory.On read returns 0.
1.3.6.1.4.1.2356.16.1.1.3.14ScalaragentReloadConfigread-writecurrentReloads the text-based configuration file named startup-config stored in non-volatile memory.On read returns 0.
1.3.6.1.4.1.2356.16.1.1.3.15ScalaragentClearInterfaceConfigread-writecurrentClear configuration on specified interface index. On read returns 0.
1.3.6.1.4.1.2356.16.1.1.4NodeagentCableTesterGroup
1.3.6.1.4.1.2356.16.1.1.4.1ScalaragentCableTesterStatusread-writecurrentStatus of the Virtual Cable Tester active(1) - cable testing is in progress. Set to this value to start the test. success(2) - A successful test was performed.…
1.3.6.1.4.1.2356.16.1.1.4.2ScalaragentCableTesterIfIndexread-writecurrentDetermines on which port to perform the cable test. Limited to copper based ports.
1.3.6.1.4.1.2356.16.1.1.4.3ScalaragentCableTesterCableStatusread-onlycurrentIndicates the results of the Cable Test. normal(1) - The cable is working correctly. open(2) - The cable is disconnected or there is a faulty connector. short(…
1.3.6.1.4.1.2356.16.1.1.4.4ScalaragentCableTesterMinimumCableLengthread-onlycurrentThe estimated length of the cable in meters. This value indicates the shortest length estimated. This object will return 0 if agentCableTesterStatus is not suc…
1.3.6.1.4.1.2356.16.1.1.4.5ScalaragentCableTesterMaximumCableLengthread-onlycurrentThe estimated length of the cable in meters. This value indicates the longest length estimated. This object will return 0 if agentCableTesterStatus is not succ…
1.3.6.1.4.1.2356.16.1.1.4.6ScalaragentCableTesterCableFailureLocationread-onlycurrentThe estimated distance in meters from the end of the cable to the failure location. This object will return 0 if agentCableTesterStatus is not success(2).
Type Definitions
NameSyntaxStatusDescription
Ipv6AddressOCTET STRING (SIZE (16))currentThis data type is used to model IPv6 addresses. This is a binary string of 16 octets in network byte-order.
Ipv6AddressIfIdentifierOCTET STRING (SIZE (0..8))currentThis data type is used to model IPv6 address interface identifiers. This is a binary string of up to 8 octets in network byte-order.
Ipv6AddressPrefixOCTET STRING (SIZE (0..16))currentThis data type is used to model IPv6 address prefixes. This is a binary string of up to 16 octets in network byte-order.
Ipv6IfIndexInteger32 (1..2147483647)currentA unique value, greater than zero for each internetwork-layer interface in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each internetwork-layer interface mus…
Ipv6IfIndexOrZeroInteger32 (0..2147483647)currentThis textual convention is an extension of the Ipv6IfIndex convention. The latter defines a greater than zero value used to identify an IPv6 interface in the managed system. This extension permits the additional value o…
PortIdOCTET STRING (SIZE (2))currentThis data type is used to model port ids. This is a binary string of 2 octets.
PortListOCTET STRINGcurrentEach octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…
VlanListOCTET STRINGcurrentEach octet within this value specifies a set of eight vlans, with the first octet specifying vlans 1 through 8, the second octet specifying vlans 9 through 16, etc. Within each octet, the most significant bit represents…
MIB Viewer