LANOPTICS-SYSTEM-MIB
51 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises IpAddress |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.224 | NodelanOptics | |||
| 1.3.6.1.4.1.224.2 | NodelanOpticsSystem | |||
| 1.3.6.1.4.1.224.2.1 | ScalarsnSysDirectory | read-only | mandatory | Gives the agent directory content (make DOS DIR command on agent directory). |
| 1.3.6.1.4.1.224.2.2 | ScalarsnAgentVersion | read-only | mandatory | Gives the agent major version in the high order word and the minor version in low order word. |
| 1.3.6.1.4.1.224.2.3 | NodelanOpticsSystemCMOS | |||
| 1.3.6.1.4.1.224.2.3.1 | NodelanOpticsSystemCMOSIp | |||
| 1.3.6.1.4.1.224.2.3.1.1 | TablesnSysCMOSIpInterfaceTable | not-accessible | mandatory | A list of network interfaces. |
| 1.3.6.1.4.1.224.2.3.1.1.1 | RowsnSysCMOSIpInterfaceEntry | not-accessible | mandatory | An interface entry containing the Ipaddress and net-mask. |
| 1.3.6.1.4.1.224.2.3.1.1.1.1 | ColumnsnSysCMOSIpIpAddr | read-write | mandatory | Gives the interface's IpAddress |
| 1.3.6.1.4.1.224.2.3.1.1.1.2 | ColumnsnSysCMOSIpNetMask | read-write | mandatory | Gives the interfaces's netmask |
| 1.3.6.1.4.1.224.2.3.1.2 | ScalarsnSysCMOSIpDefGw | read-write | mandatory | Gives the agent's default gateway. |
| 1.3.6.1.4.1.224.2.3.1.3 | ScalarsnSysCMOSIpTFTPOp | read-write | mandatory | Gives the TFTP policy: 1 - No TFTP, 2 - Optional, 3 - Always |
| 1.3.6.1.4.1.224.2.3.1.4 | ScalarsnSysCMOSIpTFTPAddr | read-write | mandatory | Gives the TFTP server Ip address. |
| 1.3.6.1.4.1.224.2.3.1.5 | ScalarsnSysCMOSIpTFTPFileName | read-write | mandatory | Gives the boot file name at the server (full path). |
| 1.3.6.1.4.1.224.2.3.1.6 | ScalarsnSysCMOSIpTFTPDrive | read-write | mandatory | Gives the TFTP operation destination drive (value of ASCII character). |
| 1.3.6.1.4.1.224.2.3.2 | NodelanOpticsSystemCMOSHub | |||
| 1.3.6.1.4.1.224.2.3.2.1 | TablesnSysCMOSHubSlotConfigTable | not-accessible | mandatory | A list of slots entries. Each entry in this table, contains the last 20 operations performed on the slot. |
| 1.3.6.1.4.1.224.2.3.2.1.1 | RowsnSysCMOSHubSlotConfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.224.2.3.2.1.1.1 | ColumnsnSysSlotLastOperations | read-write | mandatory | A description of last 20 operations performed, on the slot |
| 1.3.6.1.4.1.224.2.3.2.1.1.2 | ColumnsnSysResetSlotQueue | read-write | mandatory | Resets the last 20 operations queue. |
| 1.3.6.1.4.1.224.2.3.2.2 | ScalarsnSysCMOSHubSaveHubFunctions | read-write | mandatory | Save (2) /Do not Save (1) Hub managment functions in non-volatile memory. |
| 1.3.6.1.4.1.224.2.3.3 | NodelanOpticsSystemCMOSRPL | |||
| 1.3.6.1.4.1.224.2.3.3.1 | ScalarsnSysCMOSRPLMode | read-write | mandatory | Determine if the image will be loaded through RPL at next boot: RPL off - 1, RPL on - 2. |
| 1.3.6.1.4.1.224.2.3.3.2 | ScalarsnSysCMOSFlashMode | read-write | mandatory | Determine if the image will be loaded from flash memory at next boot : flash on - 2, flash off - 1. |
| 1.3.6.1.4.1.224.2.3.4 | NodelanOpticsSystemCMOSSerial | |||
| 1.3.6.1.4.1.224.2.3.4.1 | ScalarsnSysCMOSSerialMode | read-write | mandatory | Determine the serial port usage mode : Proprietary - 1, SLIP - 2, None - 3. |
| 1.3.6.1.4.1.224.2.3.4.2 | ScalarsnSysCMOSSerialComSelect | read-write | mandatory | Determine which COM port is used. |
| 1.3.6.1.4.1.224.2.3.4.3 | ScalarsnSysCMOSSerialBaudRate | read-write | mandatory | Determine the serial port baud rate : 1200 - 1, 2400 - 2, 4800 - 3, 9600 - 4, 19200 - 5, 38300 - 6, 57600 - 7 |
| 1.3.6.1.4.1.224.2.3.4.4 | ScalarsnSysCMOSSerialWordLength | read-write | mandatory | Determine the data bits length : 7 Bits - 1, 8 Bits -2 |
| 1.3.6.1.4.1.224.2.3.4.5 | ScalarsnSysCMOSSerialStopBits | read-write | mandatory | Determine the number of stop bits; values allowed : 1 Bit - 1, 1.5 Bits - 2, 2 Bits - 3. |
| 1.3.6.1.4.1.224.2.3.4.6 | ScalarsnSysCMOSSerialParityCheck | read-write | mandatory | Determine the parity check policy : Even - 1, Odd - 2, None - 3. |
| 1.3.6.1.4.1.224.2.3.5 | NodelanOpticsSystemCMOSSRAM | |||
| 1.3.6.1.4.1.224.2.3.5.1 | ScalarsnSysCMOSSRAMKeepAliveSecInterval | read-write | mandatory | Determine the interval of the keep alive frame in seconds |
| 1.3.6.1.4.1.224.2.3.6 | NodelanOpticsSystemCMOSSNMP | |||
| 1.3.6.1.4.1.224.2.3.6.1 | ScalarsnSysCMOSSNMPCommunitiesNum | read-only | mandatory | Keeps the number of communities. |
| 1.3.6.1.4.1.224.2.3.6.2 | ScalarsnSysCMOSSNMPTrapManagersNum | read-only | mandatory | Keeps the number of managers that traps are send to. |
| 1.3.6.1.4.1.224.2.3.6.3 | TablesnSysCMOSSNMPCommunitiesTable | not-accessible | mandatory | A table containing the SNMP communities |
| 1.3.6.1.4.1.224.2.3.6.3.1 | RowsnSysCMOSSNMPCommunitiesEntry | not-accessible | mandatory | An entry community info |
| 1.3.6.1.4.1.224.2.3.6.3.1.1 | ColumnsnSysCMOSSNMPCommunityName | read-write | mandatory | This variable will give the community name. |
| 1.3.6.1.4.1.224.2.3.6.3.1.2 | ColumnsnSysCMOSSNMPCommunityPrivs | read-write | mandatory | This variable will give the community privilages: Read Only - 1, Read/Write - 2. |
| 1.3.6.1.4.1.224.2.3.6.4 | TablesnSysCMOSSNMPTrapCommunitiesTable | not-accessible | mandatory | A table containing the SNMP communities |
| 1.3.6.1.4.1.224.2.3.6.4.1 | RowsnSysCMOSSNMPTrapCommunitiesEntry | not-accessible | mandatory | An entry of trap IP destinations. |
| 1.3.6.1.4.1.224.2.3.6.4.1.1 | ColumnsnSysCMOSSNMPTrapCommunityIpAddr | read-write | mandatory | This variable gives a manager IP address for traps destination. |
| 1.3.6.1.4.1.224.2.3.7 | NodelanOpticsSystemCMOSACCESS | |||
| 1.3.6.1.4.1.224.2.3.7.1 | ScalarsnSysCMOSACCESSOffset | read-write | mandatory | Gives the offset in the CMOS array. For internal use only |
| 1.3.6.1.4.1.224.2.3.7.2 | ScalarsnSysCMOSACCESSLength | read-write | mandatory | Gives the length (max 512) in the CMOS array. For internal use only, |
| 1.3.6.1.4.1.224.2.3.7.3 | ScalarsnSysCMOSACCESSSequence | read-write | mandatory | Gives a sequnce of bytes from CMOS array. For internal use only |
| 1.3.6.1.4.1.224.2.3.8 | NodelanOpticsSystemCMOSBRDG | |||
| 1.3.6.1.4.1.224.2.3.8.1 | ScalarsnSysCMOSBRDGradius | read-write | mandatory | Sets the discovery radius. Value = 0-7. 0=disable bridge. |
| 1.3.6.1.4.1.224.2.3.8.2 | ScalarsnSysCMOSBRDGlinkNumber | read-write | mandatory | Sets the Link number. Value = 0-3. |
| 1.3.6.1.4.1.224.2.3.8.3 | ScalarsnSysCMOSBRDGpassword | read-write | mandatory | Sets the bridge password. 8 characters . |