LCOS-SX-GENERAL-MIB
70 objects
Management information base definitions
Imported Objects
| SNMPv2-SMI | Counter64 enterprises Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2356.100 | IdentitylcosSXGeneral | Management information base definitions | ||
| 1.3.6.1.4.1.2356.100.0 | NodelcsNotificationGrp | |||
| 1.3.6.1.4.1.2356.100.0.1 | NodelcsTraps | |||
| 1.3.6.1.4.1.2356.100.0.1.100 | NotificationlcsTrapsTemperatureStateChange | current | Trap is sent when the system temperature crosses a threshold. To avoid rapid flapping between states, a hysteresis may be applied. | |
| 1.3.6.1.4.1.2356.100.0.1.101 | NotificationlcsTrapsFanStateChange | current | Trap is sent when fan state change happens. | |
| 1.3.6.1.4.1.2356.100.0.1.102 | NotificationlcsTrapsPSUStateChange | current | Trap is sent when Power Supply state change happens. | |
| 1.3.6.1.4.1.2356.100.0.2 | NodelcsNotificationVars | |||
| 1.3.6.1.4.1.2356.100.0.2.100 | ScalarlcsNotificationStateChangeEvent | accessible-for-notify | current | This event describes state change events of a fan or power supply. insertion - hot-pluggable fan or power supply was inserted removal - hot-pluggable fan or po… |
| 1.3.6.1.4.1.2356.100.0.2.101 | ScalarlcsNotificationTemperatureStatusCurrent | accessible-for-notify | current | The current status of the temperature sensor. |
| 1.3.6.1.4.1.2356.100.0.2.102 | ScalarlcsNotificationTemperatureStatusPrevious | accessible-for-notify | current | The previous status of the temperatur sensor, i.e. before this events triggered. |
| 1.3.6.1.4.1.2356.100.1 | NodelcsStatus | |||
| 1.3.6.1.4.1.2356.100.1.1 | NodelcsMonitoring | |||
| 1.3.6.1.4.1.2356.100.1.1.1 | TablelcsMonitoringTempSensorsTable | not-accessible | current | Table of temperature sensors on the device. |
| 1.3.6.1.4.1.2356.100.1.1.1.1 | RowlcsMonitoringTempSensorsTableEntry | not-accessible | current | Temperature sensor entry. |
| 1.3.6.1.4.1.2356.100.1.1.1.1.1 | ColumnlcsMonitoringTempSensorUnitIndex | read-only | current | Device stacking unit index where the sensor is on, 1 if device is not capable of stacking. |
| 1.3.6.1.4.1.2356.100.1.1.1.1.2 | ColumnlcsMonitoringTempSensorIndex | read-only | current | Index of the temperature sensor on the device, repeating for multiple stacking units. |
| 1.3.6.1.4.1.2356.100.1.1.1.1.3 | ColumnlcsMonitoringTempSensorDescription | read-only | current | Description of the temperature sensor. |
| 1.3.6.1.4.1.2356.100.1.1.1.1.4 | ColumnlcsMonitoringTempSensorType | read-only | current | Type of the temperature sensor. Usually fixed(1). |
| 1.3.6.1.4.1.2356.100.1.1.1.1.5 | ColumnlcsMonitoringTempSensorState | read-only | current | State of the temperature sensor. |
| 1.3.6.1.4.1.2356.100.1.1.1.1.6 | ColumnlcsMonitoringTempSensorTemperature | read-only | current | Temperature measured by the temperature sensor. |
| 1.3.6.1.4.1.2356.100.1.1.2 | TablelcsMonitoringTempUnitTable | not-accessible | current | Table of temperature state per unit. |
| 1.3.6.1.4.1.2356.100.1.1.2.1 | RowlcsMonitoringTempUnitEntry | not-accessible | current | Unit temperatur state entry. |
| 1.3.6.1.4.1.2356.100.1.1.2.1.1 | ColumnlcsMonitoringTempUnitIndex | read-only | current | Unit index of the unit, 1 if device is not capable of stacking. |
| 1.3.6.1.4.1.2356.100.1.1.2.1.2 | ColumnlcsMonitoringTempUnitState | read-only | current | The temperature state of the unit. |
| 1.3.6.1.4.1.2356.100.1.1.2.1.3 | ColumnlcsMonitoringTempUnitTemperature | read-only | current | The highest temperature currently reported by any sensor on the unit. |
| 1.3.6.1.4.1.2356.100.1.1.3 | TablelcsMonitoringFansTable | not-accessible | current | Table of fans on the device. |
| 1.3.6.1.4.1.2356.100.1.1.3.1 | RowlcsMonitoringFansTableEntry | not-accessible | current | Fan entry. |
| 1.3.6.1.4.1.2356.100.1.1.3.1.1 | ColumnlcsMonitoringFanUnitIndex | read-only | current | Device stacking unit index where the fan is on, 1 if device is not capable of stacking. |
| 1.3.6.1.4.1.2356.100.1.1.3.1.2 | ColumnlcsMonitoringFanIndex | read-only | current | Index of the fan on the device, repeating for multiple stacking units. |
| 1.3.6.1.4.1.2356.100.1.1.3.1.3 | ColumnlcsMonitoringFanDescription | read-only | current | Description of the fan. |
| 1.3.6.1.4.1.2356.100.1.1.3.1.4 | ColumnlcsMonitoringFanType | read-only | current | Type of the fan. Usually fixed(1) oder removable(2). |
| 1.3.6.1.4.1.2356.100.1.1.3.1.5 | ColumnlcsMonitoringFanState | read-only | current | State of the fan. |
| 1.3.6.1.4.1.2356.100.1.1.3.1.6 | ColumnlcsMonitoringFanSpeed | read-only | current | Speed of the fan in RPM. |
| 1.3.6.1.4.1.2356.100.1.1.4 | TablelcsMonitoringPSUTable | not-accessible | current | Table of power supply units on the device. |
| 1.3.6.1.4.1.2356.100.1.1.4.1 | RowlcsMonitoringPSUTableEntry | not-accessible | current | Power supply unit entry. |
| 1.3.6.1.4.1.2356.100.1.1.4.1.1 | ColumnlcsMonitoringPSUUnitIndex | read-only | current | Device stacking unit index where the PSU is on, 1 if device is not capable of stacking. |
| 1.3.6.1.4.1.2356.100.1.1.4.1.2 | ColumnlcsMonitoringPSUIndex | read-only | current | Index of the PSU on the device, repeating for multiple stacking units. |
| 1.3.6.1.4.1.2356.100.1.1.4.1.3 | ColumnlcsMonitoringPSUDescription | read-only | current | Description of the PSU. |
| 1.3.6.1.4.1.2356.100.1.1.4.1.4 | ColumnlcsMonitoringPSUType | read-only | current | Type of the PSU. |
| 1.3.6.1.4.1.2356.100.1.1.4.1.5 | ColumnlcsMonitoringPSUState | read-only | current | State of the PSU. |
| 1.3.6.1.4.1.2356.100.2 | NodelcsConfiguration | |||
| 1.3.6.1.4.1.2356.100.2.1500 | NodelcsLMC | |||
| 1.3.6.1.4.1.2356.100.2.1500.1 | ScalarlcsLMCOperating | read-write | current | LMC Operating Switch 0:Disable 1:Enable 2:Try |
| 1.3.6.1.4.1.2356.100.2.1500.2 | ScalarlcsLMCConfigViaDHCP | read-write | current | Enables LMC configuration via DHCP option 43 0:Disable 1:Enable |
| 1.3.6.1.4.1.2356.100.2.1500.3 | ScalarlcsLMCDomain | read-write | current | LMC Domain for example cloud.lancom.de |
| 1.3.6.1.4.1.2356.100.2.1500.4 | ScalarlcsLMCAutoRenew | read-write | current | Renew DHCP lease early when connection to LMC is not possible 0:Disabled 1:Enabled |
| 1.3.6.1.4.1.2356.100.2.1500.5 | ScalarlcsLMCRolloutProjectID | read-write | current | LMC Project rollout information string |
| 1.3.6.1.4.1.2356.100.2.1500.6 | ScalarlcsLMCRolloutLocationID | read-write | current | LMC Location rollout information string |
| 1.3.6.1.4.1.2356.100.2.1500.7 | ScalarlcsLMCRolloutRole | read-write | current | LMC Role rollout information string |
| 1.3.6.1.4.1.2356.100.2.1500.50 | ScalarlcsLMCZeroTouchSupport | read-only | current | Support for Zero Touch 0:No 1:Yes |
| 1.3.6.1.4.1.2356.100.2.1500.51 | ScalarlcsLMCPairingTokenPresent | read-only | current | Paring Token present 0:No 1:Yes |
| 1.3.6.1.4.1.2356.100.2.1500.53 | ScalarlcsLMCManagementStatus | read-only | current | Management status |
| 1.3.6.1.4.1.2356.100.2.1500.54 | ScalarlcsLMCControlStatus | read-only | current | Control status |
| 1.3.6.1.4.1.2356.100.2.1500.55 | ScalarlcsLMCMonitoringStatus | read-only | current | Monitoring status |
| 1.3.6.1.4.1.2356.100.2.1500.57 | ScalarlcsLMCConfigModified | read-only | current | Configuration modified by LMC 0:No 1:Yes |
| 1.3.6.1.4.1.2356.100.2.1500.58 | ScalarlcsLMCDeviceID | read-only | current | Device ID |
| 1.3.6.1.4.1.2356.100.2.1500.59 | ScalarlcsLMCStackingStatus | read-only | current | 0:NotSupported 1:StackingDisabled 2:StackingConfigured 3:StackingActive 4:StackingUnitConfigurationActive |
| 1.3.6.1.4.1.2356.100.2.1500.100 | ScalarlcsLMCStatusRTT | read-only | current | Heartbeat round trip time |
| 1.3.6.1.4.1.2356.100.2.1500.101 | TablelcsLMCTransportStatusTable | not-accessible | current | Transport status |
| 1.3.6.1.4.1.2356.100.2.1500.101.1 | RowlcsLMCTransportStatusTableEntry | not-accessible | current | Transport number |
| 1.3.6.1.4.1.2356.100.2.1500.101.1.1 | ColumnlcsLMCTransportStatusTransportNumberIndex | not-accessible | current | Transport status index |
| 1.3.6.1.4.1.2356.100.2.1500.101.1.2 | ColumnlcsLMCTransportStatusServiceName | read-only | current | Service name |
| 1.3.6.1.4.1.2356.100.2.1500.101.1.3 | ColumnlcsLMCTransportStatusHttpRequests | read-only | current | Number of Http requests |
| 1.3.6.1.4.1.2356.100.2.1500.101.1.4 | ColumnlcsLMCTransportStatusHttpRequestsErrors | read-only | current | Number of Http request errors |
| 1.3.6.1.4.1.2356.100.2.1500.101.1.5 | ColumnlcsLMCTransportStatusTXBytes | read-only | current | Number of transmitted bytes |
| 1.3.6.1.4.1.2356.100.2.1500.101.1.7 | ColumnlcsLMCTransportStatusRXBytes | read-only | current | Number of received bytes |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| LMCStatus | INTEGER { unpaired(0), paired(1), disabled(2), disabledByWLC(3), operating(4), httpProtocolError(5), httpConnectionError(6), dnsError(7), memoryError(8), notYet(9), redirect(10), authenticationError(11), error(12), certificateStorageError(13), pairedAndClaimed(14), certificateError(15), deactivatedNoActivationCode(16) } | current | Management, Monitoring and Control Status. |
| MonitoringModuleStatus | INTEGER { notpresent(1), operational(2), failed(3), powering(4), nopower(5), notpowering(6), incompatible(7), warning(8), present(9) } | current | Module (fan, PSU) status values. |
| MonitoringSensorType | INTEGER { fixed(1), removable(2), fixedAC(3), removableDC(4), fixedDC(5), removableAC(6) } | current | Sensor type values. |
| MonitoringTempSensorStatus | INTEGER { low(0), normal(1), warning(2), critical(3), shutdown(4), notpresent(5), notoperational(6) } | current | Temperatur sensor status values. |