LEXMARK-PVT-MIB
201 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.641 | Nodelexmark | |||
| 1.3.6.1.4.1.641.1 | Nodeadapter | |||
| 1.3.6.1.4.1.641.1.0 | NodeirCleared | The condition on the printer has been cleared. | ||
| 1.3.6.1.4.1.641.1.1 | NodeirCondition | An error condition exists on the printer | ||
| 1.3.6.1.4.1.641.1.1 | Nodeopsys | |||
| 1.3.6.1.4.1.641.1.1.1 | ScalaropsysCodeRev | read-only | mandatory | A textual identification of network adapter's firmware revision level. For example: 7.15.1 |
| 1.3.6.1.4.1.641.1.1.2 | ScalaropsysJobTimeout | read-write | mandatory | The adapter job timeout period in seconds. |
| 1.3.6.1.4.1.641.1.1.3 | ScalaropsysCurrentJob | read-only | mandatory | A textual description of the currently printing job containing the Source NOS, Source server, Source user, Job number, and Job size, separated by CR LF. A NULL… |
| 1.3.6.1.4.1.641.1.1.4 | ScalaropsysRAMSize | read-only | mandatory | The size of the network adapter's RAM in bytes. |
| 1.3.6.1.4.1.641.1.1.5 | ScalaropsysNVRAMSize | read-only | mandatory | The size of the network adapter's NVRAM in bytes. |
| 1.3.6.1.4.1.641.1.1.6 | ScalaropsysROMSize | read-only | mandatory | The size of the network adapter's ROM in bytes. |
| 1.3.6.1.4.1.641.1.1.7 | ScalaropsysROMType | read-only | mandatory | A textual description of the network adapter's ROM technology. Currently valid types are: MASK_ROM, OTP, FLASH, UV_EPROM, EEPROM, and OTHER. |
| 1.3.6.1.4.1.641.1.1.8 | ScalaropsysProtocols | read-only | mandatory | A bitmap representing the protocols supported by the network adapter. Bit Value Protocol 0 1 LexLink 1 2 Netware 2 4 AppleTalk 3 8 TCP/IP 4 16 AirPrint 5 32 re… |
| 1.3.6.1.4.1.641.1.1.9 | ScalaropsysTimeToReset | read-write | mandatory | The amount of time remaining until the adapter performs a power on reset. A value of -1 indicates no reset is scheduled. Setting to 0 causes the adapter to res… |
| 1.3.6.1.4.1.641.1.1.10 | ScalaropsysCardPartNo | read-only | mandatory | A textual representation of the network adapter's part number. |
| 1.3.6.1.4.1.641.1.1.11 | ScalaropsysCardEC | read-only | mandatory | A textual representation of the network adapter's EC level. |
| 1.3.6.1.4.1.641.1.1.12 | TableopsysCurrentJobTable | not-accessible | mandatory | A table of current job information for each of the network adapter's printer ports. |
| 1.3.6.1.4.1.641.1.1.12.1 | RowopsysCurrentJobEntry | not-accessible | mandatory | An entry containing job information for one printer port. |
| 1.3.6.1.4.1.641.1.1.12.1.1 | ColumnopsysCurrentJobEntryIndex | read-only | mandatory | A unique value used by the adapter to identify job information for one printer port. Each entry corresponds to a value lexhdwrPortTableIndex. |
| 1.3.6.1.4.1.641.1.1.12.1.2 | ColumnopsysCurrentJobString | read-only | mandatory | A textual description of the this printer port's currently printing job containing the Source NOS, Source server, Source user, Job number, and Job size, separa… |
| 1.3.6.1.4.1.641.1.1.13 | ScalaropsysDeviceType | read-only | mandatory | A two byte code representing the adapter's type. |
| 1.3.6.1.4.1.641.1.1.14 | ScalaropsysAdapterName | read-only | mandatory | A Unicode representation of the adapter's name. |
| 1.3.6.1.4.1.641.1.1.15 | ScalaropsysAdapterCapabilities | read-only | mandatory | A bitmap representing the capabilities of the adapter. Bit Value Frame type 31 0x80000000 NPANT via Netware and IP 30 0x40000000 Receive-only Fax 29 0x20000000… |
| 1.3.6.1.4.1.641.1.2 | NodeirOutputFull | The printers output bin is full. | ||
| 1.3.6.1.4.1.641.1.2 | Nodelexlink | |||
| 1.3.6.1.4.1.641.1.2.1 | ScalarlexlinkActivated | read-write | mandatory | The activation status of the LexLink protocol. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset. |
| 1.3.6.1.4.1.641.1.2.2 | ScalarlexlinkNickname | read-write | mandatory | The nickname assigned to the adapter for the LexLink protocol. Note that some adapters may not support the maximum length. |
| 1.3.6.1.4.1.641.1.3 | NodeirLoadPaper | Load paper on the printer | ||
| 1.3.6.1.4.1.641.1.3 | Nodelexipx | |||
| 1.3.6.1.4.1.641.1.3.1 | ScalarlexipxActivated | read-write | mandatory | The activation status of the Netware protocol. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset. |
| 1.3.6.1.4.1.641.1.3.2 | ScalarlexipxLoginName | read-write | mandatory | The adapter's Netware login name. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset. |
| 1.3.6.1.4.1.641.1.3.3 | ScalarlexipxNetNumber | read-only | mandatory | The network number of the Netware network to which the adapter is connected. |
| 1.3.6.1.4.1.641.1.3.4 | ScalarlexipxSAPMode | read-write | mandatory | The network adapter's current Netware SAP'ing status. |
| 1.3.6.1.4.1.641.1.3.5 | ScalarlexipxServerMode | read-write | mandatory | The current Netware server mode of the adapter. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset. |
| 1.3.6.1.4.1.641.1.3.6 | ScalarlexipxNumPorts | read-only | mandatory | The number of Netware printer ports. |
| 1.3.6.1.4.1.641.1.3.7 | TablelexipxPortInfoTable | not-accessible | mandatory | A table of Netware printer port information. |
| 1.3.6.1.4.1.641.1.3.7.1 | RowlexipxPortInfoEntry | not-accessible | mandatory | An entry containing Netware printer port information. |
| 1.3.6.1.4.1.641.1.3.7.1.1 | ColumnlexipxPortInfoIndex | read-only | mandatory | A unique value used by the adapter to identify Netware printer ports. |
| 1.3.6.1.4.1.641.1.3.7.1.2 | ColumnlexipxPortInfoPollIntvl | read-write | mandatory | The Netware queue polling interval for this printer port. |
| 1.3.6.1.4.1.641.1.3.7.1.3 | ColumnlexipxPortInfoEnable | read-write | mandatory | The Netware queue status of this printer port. |
| 1.3.6.1.4.1.641.1.3.7.1.4 | ColumnlexipxPortInfoBannerPage | read-only | mandatory | The Netware queue banner page status for this printer port. |
| 1.3.6.1.4.1.641.1.3.8 | ScalarlexipxNumPrefServers | read-only | mandatory | The maximum number of preferred Netware servers supported by this network adapter. |
| 1.3.6.1.4.1.641.1.3.9 | TablelexipxPrefSrvrTable | not-accessible | mandatory | A table of the network adapter's preferred Netware servers. |
| 1.3.6.1.4.1.641.1.3.9.1 | RowlexipxPrefSrvrEntry | not-accessible | mandatory | An entry containing preferred Netware server information. |
| 1.3.6.1.4.1.641.1.3.9.1.1 | ColumnlexipxPrefSrvrIndex | read-only | mandatory | A unique value used by the adapter to identify preferred Netware servers. |
| 1.3.6.1.4.1.641.1.3.9.1.2 | ColumnlexipxPrefSrvrName | read-write | mandatory | The name of this preferred Netware server. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset. |
| 1.3.6.1.4.1.641.1.3.10 | TablelexipxConnSrvrTable | not-accessible | mandatory | A table of connected Netware server information. |
| 1.3.6.1.4.1.641.1.3.10.1 | RowlexipxConnSrvrEntry | not-accessible | mandatory | An entry containing connected Netware server information. |
| 1.3.6.1.4.1.641.1.3.10.1.1 | ColumnlexipxConnSrvrIndex | read-only | mandatory | A unique value used by the adapter to identify connected Netware servers. |
| 1.3.6.1.4.1.641.1.3.10.1.2 | ColumnlexipxConnSrvrName | read-only | mandatory | The name of this connected Netware server. |
| 1.3.6.1.4.1.641.1.3.10.1.3 | ColumnlexipxConnSrvrNet | read-only | mandatory | The Netware network number of this connected Netware server. |
| 1.3.6.1.4.1.641.1.3.10.1.4 | ColumnlexipxConnSrvrNode | read-only | mandatory | The Netware node address of the connected Netware server. |
| 1.3.6.1.4.1.641.1.3.10.1.5 | ColumnlexipxConnSrvrConnNum | read-only | mandatory | The connection number of the connected Netware server (pserver mode only). |
| 1.3.6.1.4.1.641.1.3.10.1.6 | ColumnlexipxConnSrvrConnId | read-only | mandatory | The connection ID of the connected Netware server (rprinter mode only). |
| 1.3.6.1.4.1.641.1.3.10.1.7 | ColumnlexipxConnSrvrPSConnID | read-only | mandatory | The connection ID of the connected Netware pserver (rprinter mode only). |
| 1.3.6.1.4.1.641.1.3.11 | ScalarlexipxFrameType | read-write | mandatory | A bitmap of the supported IPX frame types. Bit Value Frame type 0 1 Token-Ring 1 2 Token-Ring Source Routed 2 4 Token-Ring SNAP 3 8 Token-Ring SNAP Source Rout… |
| 1.3.6.1.4.1.641.1.3.12 | TablelexipxTrapTable | not-accessible | mandatory | A table of IPX trap destination configurations. |
| 1.3.6.1.4.1.641.1.3.12.1 | RowlexipxTrapEntry | not-accessible | mandatory | An entry containing an IPX trap destination's configuration. |
| 1.3.6.1.4.1.641.1.3.12.1.1 | ColumnlexipxTrapIndex | read-only | mandatory | A unique value used by the adapter to identify IPX trap destinations. |
| 1.3.6.1.4.1.641.1.3.12.1.2 | ColumnlexipxTrapMask | read-write | mandatory | The trap mask for the trap destination. It is implemented as a bitmap specifying a mask of intervention required conditions for which the adapter should send t… |
| 1.3.6.1.4.1.641.1.3.12.1.3 | ColumnlexipxTrapNetworkAddress | read-write | mandatory | The IPX network address of the trap destination. (4 bytes) |
| 1.3.6.1.4.1.641.1.3.12.1.4 | ColumnlexipxTrapNodeAddress | read-write | mandatory | The IPX node address of the trap destination. (6 bytes) |
| 1.3.6.1.4.1.641.1.3.13 | ScalarlexipxTrapType | read-write | mandatory | The type of SNMP over IPX traps that will be sent by the adapter. Setting this variable to multiplexed(1) configures all intervention required conditions to se… |
| 1.3.6.1.4.1.641.1.3.14 | ScalarlexipxGSQ | read-write | mandatory | The General Service Query (GSQ) interval. This is the period in seconds that the adapter waits after a failed GSQ before attempting another as it searches for … |
| 1.3.6.1.4.1.641.1.4 | NodeirPaperJam | Paper jam on the printer. | ||
| 1.3.6.1.4.1.641.1.4 | Nodelextalk | |||
| 1.3.6.1.4.1.641.1.4.1 | ScalarlextalkActivated | read-write | mandatory | The activation status of the AppleTalk protocol. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToRese… |
| 1.3.6.1.4.1.641.1.4.2 | ScalarlextalkAddress | read-only | mandatory | The AppleTalk Address of the network card. This variable is not implemented on the XLe adapters. |
| 1.3.6.1.4.1.641.1.4.3 | ScalarlextalkName | read-only | mandatory | The AppleTalk name of this adapter. This variable is not implemented on the XLe adapters. |
| 1.3.6.1.4.1.641.1.4.4 | ScalarlextalkZone | read-only | mandatory | The AppleTalk zone name of this adapter. This variable is not implemented on the XLe adapters. |
| 1.3.6.1.4.1.641.1.4.5 | ScalarlextalkType | read-only | mandatory | The AppleTalk type of this adapter. This variable is not implemented on the XLe adapters. |
| 1.3.6.1.4.1.641.1.5 | NodeirTonerLow | Toner low on the printer | ||
| 1.3.6.1.4.1.641.1.5 | Nodelextcp | |||
| 1.3.6.1.4.1.641.1.5.1 | ScalarlextcpActivated | read-write | mandatory | The activation status of the TCP/IP Protocol. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset. |
| 1.3.6.1.4.1.641.1.5.2 | ScalarlextcpBootpEnable | read-write | mandatory | The status of whether or not BOOTP is attempted to determine the IP parameters. If this variable is changed, the adapter must be reset before the change will t… |
| 1.3.6.1.4.1.641.1.5.3 | ScalarlextcpAddressServ | read-only | mandatory | The IP address of the DHCP, BOOTP, or RARP server that provided the adapter's IP address. |
| 1.3.6.1.4.1.641.1.5.4 | ScalarlextcpNumNPAPservers | read-only | mandatory | The maximum number of concurrent NPAP over TCP server connections. |
| 1.3.6.1.4.1.641.1.5.5 | TablelextcpNPAPserversTable | not-accessible | mandatory | A table of NPAP over TCP server information. |
| 1.3.6.1.4.1.641.1.5.5.1 | RowlextcpNPAPserversEntry | not-accessible | mandatory | An entry containing NPAP over TCP server information. |
| 1.3.6.1.4.1.641.1.5.5.1.1 | ColumnlextcpNPAPserverIndex | read-only | mandatory | A unique value used by the adapter to identify NPAP over TCP servers. |
| 1.3.6.1.4.1.641.1.5.5.1.2 | ColumnlextcpNPAPserverAddress | read-only | mandatory | The IP address of this NPAP over TCP server. |
| 1.3.6.1.4.1.641.1.5.6 | Nodelexhttp | |||
| 1.3.6.1.4.1.641.1.5.6.1 | ScalarlexhttpEnable | read-write | mandatory | The status of whether the adapter will enable the HTTP server. If this variable is changed, the adapter must be reset before the change will take effect. See o… |
| 1.3.6.1.4.1.641.1.5.6.2 | ScalarlexhttpNumLinks | read-only | mandatory | The number of configurable HTTP links for the adapter. |
| 1.3.6.1.4.1.641.1.5.6.3 | ScalarlexhttpBytesRemaining | read-only | mandatory | The number of bytes available to store HTTP link and label information. |
| 1.3.6.1.4.1.641.1.5.6.4 | ScalarlexhttpResetLinks | read-write | mandatory | A control for restoring default values for HTTP link settings. Setting the variable to reset will cause all of the HTTP link settings to be reset to their defa… |
| 1.3.6.1.4.1.641.1.5.6.5 | TablelexhttpLinkTable | not-accessible | mandatory | A table of HTTP Link settings. |
| 1.3.6.1.4.1.641.1.5.6.5.1 | RowlexhttpLinkTableEntry | not-accessible | mandatory | An entry containing HTTP link settings. |
| 1.3.6.1.4.1.641.1.5.6.5.1.1 | ColumnlexhttpLinkTableIndex | read-only | mandatory | A unique value used by the adapter to identify HTTP link settings. |
| 1.3.6.1.4.1.641.1.5.6.5.1.2 | ColumnlexhttpLinkTableStatus | read-write | mandatory | The status of the HTTP link. Get operation: linkOff personalOn useDefault defaultOff defaultOn eraseCustom Set operation: linkOff customOn useDefault . link in… |
| 1.3.6.1.4.1.641.1.5.6.5.1.3 | ColumnlexhttpLinkTableLabel | read-write | mandatory | The text to be displayed as the label of this HTTP link. It may be set to define a custom link. Note that when read, this always reflects what the server would… |
| 1.3.6.1.4.1.641.1.5.6.5.1.4 | ColumnlexhttpLinkTableURL | read-write | mandatory | The URL to be hyperlinked to by the HTTP link. It may be set to define a custom link. Note that when read, this always reflects what the server would use. As s… |
| 1.3.6.1.4.1.641.1.5.6.6 | ScalarlexhttpConfigEnable | read-write | obsolete | The status of whether HTTP configuration page is enabled. |
| 1.3.6.1.4.1.641.1.5.7 | Nodelexdhcp | |||
| 1.3.6.1.4.1.641.1.5.7.1 | ScalarlexdhcpDhcpEnable | read-write | mandatory | The status of whether DHCP is enabled. |
| 1.3.6.1.4.1.641.1.5.7.2 | ScalarlexdhcpRarpEnable | read-write | mandatory | The status of whether RARP is enabled. |
| 1.3.6.1.4.1.641.1.5.7.3 | ScalarlexdhcpAddressSource | read-only | mandatory | The method by which the current IP parameters were obtained. |
| 1.3.6.1.4.1.641.1.5.7.4 | ScalarlexdhcpWinsStatus | read-only | mandatory | The adapter's WINS server registration status. |
| 1.3.6.1.4.1.641.1.5.7.5 | ScalarlexdhcpWinsServer | read-only | mandatory | The IP address of the WINS server. |
| 1.3.6.1.4.1.641.1.5.7.6 | ScalarlexdhcpHostname | read-write | mandatory | The adapter's TCP/IP hostname. Setting 63 chars for OEM - MS310dn, 510dn, 610dn but other Lexmark Printers still max of 15 characters |
| 1.3.6.1.4.1.641.1.5.7.7 | ScalarlexdhcpLeaseLength | read-only | mandatory | The length of the adapter's DHCP address lease in seconds. |
| 1.3.6.1.4.1.641.1.5.7.8 | ScalarlexdhcpTimetoExpire | read-only | mandatory | The number of seconds until the DHCP address lease expires. |
| 1.3.6.1.4.1.641.1.5.7.9 | ScalarlexdhcpDNSServer | read-write | mandatory | The IP address of the DNS server. |
| 1.3.6.1.4.1.641.1.6 | NodeirServiceReq | Service required on the printer | ||
| 1.3.6.1.4.1.641.1.6 | Nodelexhdwr | |||
| 1.3.6.1.4.1.641.1.6.1 | ScalarlexhdwrNumPorts | read-only | mandatory | The number of printer ports supported by this network adapter. |
| 1.3.6.1.4.1.641.1.6.2 | TablelexhdwrPortTable | not-accessible | mandatory | A table of the adapter's printer port hardware settings. |
| 1.3.6.1.4.1.641.1.6.2.1 | RowlexhdwrPortTableEntry | not-accessible | mandatory | An entry containing printer port hardware settings. |
| 1.3.6.1.4.1.641.1.6.2.1.1 | ColumnlexhdwrPortTableIndex | read-only | mandatory | A unique value used by the adapter to identify printer ports. |
| 1.3.6.1.4.1.641.1.6.2.1.2 | ColumnlexhdwrPortTableType | read-only | mandatory | The type of attachment for this printer port. |
| 1.3.6.1.4.1.641.1.6.2.1.3 | ColumnlexhdwrPortTableParm1 | read-write | mandatory | For serial and parallel ports, this is the port timeout in seconds. For internal ports, this parameter is unused. |
| 1.3.6.1.4.1.641.1.6.2.1.4 | ColumnlexhdwrPortTableParm2 | read-write | mandatory | For serial ports, this is the baud rate in bits per second. For parallel ports, this is the port mode and is defined as follows: standard(0), enhanced(1) For i… |
| 1.3.6.1.4.1.641.1.6.2.1.5 | ColumnlexhdwrPortTableParm3 | read-write | mandatory | For serial ports, this is the parity and is defined as follows: none(0), odd(1), even(2), space(3), mark(4) For parallel and internal ports, this parameter is … |
| 1.3.6.1.4.1.641.1.6.2.1.6 | ColumnlexhdwrPortTableParm4 | read-write | mandatory | For serial ports, this is the number of data bits. For parallel and internal ports, this parameter is unused. |
| 1.3.6.1.4.1.641.1.6.2.1.7 | ColumnlexhdwrPortTableParm5 | read-write | mandatory | For serial ports, this is the number of stop bits and is defined as follows: bitsOne(2), bitsOneAndHalf(3), bitsTwo(4) For parallel and internal ports, this pa… |
| 1.3.6.1.4.1.641.1.6.2.1.8 | ColumnlexhdwrPortTableParm6 | read-write | mandatory | For serial ports, this is the pacing mode and is defined as follows: paceDtr(0), paceXonXff(1) For non XLe parallel ports, this is the parallel protocol and is… |
| 1.3.6.1.4.1.641.1.6.2.1.9 | ColumnlexhdwrPortTableParm7 | read-write | mandatory | For all ports, this is the configured NPAP mode. For internal ports this is a read-only variable. |
| 1.3.6.1.4.1.641.1.6.2.1.10 | ColumnlexhdwrPortTableParm8 | read-only | mandatory | For all ports, this is the NPAP status. For internal ports this is a read-only variable. |
| 1.3.6.1.4.1.641.1.6.2.1.11 | ColumnlexhdwrPortTableParm9 | read-write | mandatory | For serial ports, this is the class of device attached. This variable is unused on the XLe adapters. |
| 1.3.6.1.4.1.641.1.7 | NodeirDiskErr | Disk error on the printer | ||
| 1.3.6.1.4.1.641.1.7 | Nodelexmac | |||
| 1.3.6.1.4.1.641.1.7.1 | ScalarlexmacType | read-only | mandatory | A textual representation of network medium to which the network adapter is attached (e.g. Ethernet). |
| 1.3.6.1.4.1.641.1.7.2 | ScalarlexmacSpeed | read-only | mandatory | The speed, in bits per second, of the network medium to which the network adapter is attached. |
| 1.3.6.1.4.1.641.1.7.3 | ScalarlexmacConnType | read-only | mandatory | The connection type by which the network adapter is connected to the network medium. |
| 1.3.6.1.4.1.641.1.7.4 | ScalarlexmacUAA | read-only | mandatory | The network adapter's universally administered network address. |
| 1.3.6.1.4.1.641.1.7.5 | ScalarlexmacLAA | read-only | mandatory | The network adapter's locally administered network address. A value of all zeros indicates that the LAA is not in use. |
| 1.3.6.1.4.1.641.1.8 | NodeirCoverOpen | Cover open on the printer | ||
| 1.3.6.1.4.1.641.1.8 | Nodelextrap | |||
| 1.3.6.1.4.1.641.1.8.1 | ScalarlextrapDestNum | read-only | mandatory | The maximum number of IP trap destinations supported by this network adapter. |
| 1.3.6.1.4.1.641.1.8.2 | TablelextrapDestTable | not-accessible | mandatory | A table of IP trap destination configurations. |
| 1.3.6.1.4.1.641.1.8.2.1 | RowlextrapDestEntry | not-accessible | mandatory | An entry containing an IP trap destination configuration. |
| 1.3.6.1.4.1.641.1.8.2.1.1 | ColumnlextrapDestIndex | read-only | mandatory | A unique value used by the adapter to identify IP trap destinations. |
| 1.3.6.1.4.1.641.1.8.2.1.2 | ColumnlextrapDestIPAddr | read-write | mandatory | The IP address of the trap destination. |
| 1.3.6.1.4.1.641.1.8.2.1.3 | ColumnlextrapDestMask | read-write | mandatory | The trap mask for the trap destination. It is implemented as a bitmap specifying a mask of intervention required conditions for which the adapter should send t… |
| 1.3.6.1.4.1.641.1.8.3 | ScalarlextrapIPTrapType | read-write | mandatory | The type of SNMP over IP traps that will be sent by the adapter. Setting this variable to multiplexed(1) configures all intervention required conditions to sen… |
| 1.3.6.1.4.1.641.1.9 | NodeirPageComplexity | Page complexity error on the printer | ||
| 1.3.6.1.4.1.641.1.9 | Nodetime | |||
| 1.3.6.1.4.1.641.1.9.1 | ScalartimeReset | read-write | mandatory | A control for initiating an update of the system time and date using the specified timeSource. Setting the variable to reset will cause the system to update it… |
| 1.3.6.1.4.1.641.1.9.2 | ScalartimeSource | read-write | mandatory | The source for setting the system time and date. If this variable is changed, the time must be reset before the change will have an effect. See timeReset. |
| 1.3.6.1.4.1.641.1.9.3 | ScalartimeUTCOffset | read-only | mandatory | The offset in minutes from UTC (formerly GMT) of local time. Use a negative value if West of UTC. Use a positive value if East of UTC. |
| 1.3.6.1.4.1.641.1.9.4 | ScalartimeDSTEnable | read-write | mandatory | The status of whether automatic Daylight Savings Time adjust is enabled. See timeDSTStartDate, timeDSTEndDate, and timeDSTOffset for configuration options. |
| 1.3.6.1.4.1.641.1.9.5 | ScalartimeDSTStartDate | read-only | mandatory | A textual representation of the day and time the Daylight Savings Time adjust should start if enabled (see timeDSTEnable). The format of string is as follows: … |
| 1.3.6.1.4.1.641.1.9.6 | ScalartimeDSTEndDate | read-only | mandatory | A textual representation of the day and time the Daylight Savings Time adjust should end if enabled (see timeDSTEnable). The format of string is as defined for… |
| 1.3.6.1.4.1.641.1.9.7 | ScalartimeDSTOffset | read-only | mandatory | The offset in minutes that should be applied to local time during Daylight Savings Time. |
| 1.3.6.1.4.1.641.1.9.8 | ScalartimeServerAddress | read-write | mandatory | If the specified time source is NTP (see timeSource), this is the IP address of the NTP server to use. Otherwise, the value is ignored. |
| 1.3.6.1.4.1.641.1.9.9 | ScalartimeServerName | read-write | mandatory | If the specified time source is NTP (see timeSource), and the NTP server address is not set (0.0.0.0), this is the DNS domainname of the NTP server. If the spe… |
| 1.3.6.1.4.1.641.1.10 | NodeirOffline | The printer is offline | ||
| 1.3.6.1.4.1.641.1.11 | NodeirClearedTypeII | The condition on the printer has been cleared. | ||
| 1.3.6.1.4.1.641.2 | Nodeprinter | |||
| 1.3.6.1.4.1.641.2.1 | Nodeprtgen | |||
| 1.3.6.1.4.1.641.2.1.1 | ScalarprtgenNumber | read-only | mandatory | The number of printers, regardless of their current state, available to this adapter. |
| 1.3.6.1.4.1.641.2.1.2 | TableprtgenInfoTable | not-accessible | mandatory | A table of the network adapter's attached printer information. |
| 1.3.6.1.4.1.641.2.1.2.1 | RowprtgenInfoEntry | not-accessible | mandatory | An entry containing attached printer information. |
| 1.3.6.1.4.1.641.2.1.2.1.1 | ColumnprtgenPrinterIndex | read-only | mandatory | A unique value used by the network adapter to identify attached printers. |
| 1.3.6.1.4.1.641.2.1.2.1.2 | ColumnprtgenPrinterName | read-only | mandatory | A textual description of the make and model of the attached printer, if known. |
| 1.3.6.1.4.1.641.2.1.2.1.3 | ColumnprtgenPeripheralID | read-only | mandatory | A textual description of the peripheral ID of the attached printer as defined by the IEEE 1284 standard, if known. |
| 1.3.6.1.4.1.641.2.1.2.1.4 | ColumnprtgenCodeRevision | read-only | mandatory | A textual representation of the code revision level of the attached printer, if known. |
| 1.3.6.1.4.1.641.2.1.2.1.5 | ColumnprtgenResValue | read-only | mandatory | This object is currently unused and reserved. |
| 1.3.6.1.4.1.641.2.1.2.1.6 | ColumnprtgenSerialNo | read-only | mandatory | A textual representation of the serial number of the attached printer, if known. |
| 1.3.6.1.4.1.641.2.1.2.1.7 | ColumnprtgenAssetTag | read-write | mandatory | A textual representation of the asset tag of the printer, if known. |
| 1.3.6.1.4.1.641.2.1.3 | TableprtgenStatusTable | not-accessible | mandatory | A table of the network adapter's attached printer status. |
| 1.3.6.1.4.1.641.2.1.3.1 | RowprtgenStatusEntry | not-accessible | mandatory | An entry containing attached printer status. |
| 1.3.6.1.4.1.641.2.1.3.1.1 | ColumnprtgenStatPrinterIndex | read-only | mandatory | A unique value used by the network adapter to identify attached printers. |
| 1.3.6.1.4.1.641.2.1.3.1.2 | ColumnprtgenStatusIRC | read-only | mandatory | The printer's current intervention required code. |
| 1.3.6.1.4.1.641.2.1.3.1.3 | ColumnprtgenStatusOutHopFull | read-only | mandatory | The printer's current output hopper status. |
| 1.3.6.1.4.1.641.2.1.3.1.4 | ColumnprtgenStatusInputEmpty | read-only | mandatory | The printer's current active input paper tray status. |
| 1.3.6.1.4.1.641.2.1.3.1.5 | ColumnprtgenStatusPaperJam | read-only | mandatory | The printer's current paper path status. |
| 1.3.6.1.4.1.641.2.1.3.1.6 | ColumnprtgenStatusTonerError | read-only | mandatory | The printer's current toner supply status. |
| 1.3.6.1.4.1.641.2.1.3.1.7 | ColumnprtgenStatusSrvcReqd | read-only | mandatory | The printer's current service required status. |
| 1.3.6.1.4.1.641.2.1.3.1.8 | ColumnprtgenStatusDiskError | read-only | mandatory | The printer's current disk sub-system status. |
| 1.3.6.1.4.1.641.2.1.3.1.9 | ColumnprtgenStatusCoverOpen | read-only | mandatory | The printer's current cover status. |
| 1.3.6.1.4.1.641.2.1.3.1.10 | ColumnprtgenStatusPageComplex | read-only | mandatory | The printer's current complex page status. |
| 1.3.6.1.4.1.641.2.1.3.1.11 | ColumnprtgenStatusLineStatus | read-only | mandatory | The printer's current online/offline status. |
| 1.3.6.1.4.1.641.2.1.3.1.12 | ColumnprtgenStatusBusy | read-only | mandatory | The printer's current bust status. |
| 1.3.6.1.4.1.641.2.1.3.1.13 | ColumnprtgenStatusWaiting | read-only | mandatory | The printer's current waiting status. |
| 1.3.6.1.4.1.641.2.1.3.1.14 | ColumnprtgenStatusWarming | read-only | mandatory | The printer's current warming status. |
| 1.3.6.1.4.1.641.2.1.3.1.15 | ColumnprtgenStatusPrinting | read-only | mandatory | The printer's current printing status. |
| 1.3.6.1.4.1.641.2.1.4 | ScalarprtgenFamilyID | read-only | mandatory | The printer's NPA family ID. |
| 1.3.6.1.4.1.641.2.1.5 | Nodepgcount | |||
| 1.3.6.1.4.1.641.2.1.5.1 | ScalarpgTotal | read-only | mandatory | The total number of pages printed. |
| 1.3.6.1.4.1.641.2.1.5.2 | ScalarpgMono | read-only | mandatory | The number of monochrome pages printed. |
| 1.3.6.1.4.1.641.2.1.5.3 | ScalarpgColor | read-only | mandatory | The number of color pages printed. |
| 1.3.6.1.4.1.641.3 | Nodeattachment | |||
| 1.3.6.1.4.1.641.3.1 | Nodefax | |||
| 1.3.6.1.4.1.641.3.1.1 | ScalarfaxNumber | read-only | mandatory | The number of fax modems attached to the adapter. |
| 1.3.6.1.4.1.641.3.1.2 | TablefaxTable | not-accessible | mandatory | A table of the network adapter's attached fax modems configuration data. |
| 1.3.6.1.4.1.641.3.1.2.1 | RowfaxEntry | not-accessible | mandatory | An entry containing attached fax modem configuration data. |
| 1.3.6.1.4.1.641.3.1.2.1.1 | ColumnfaxIndex | read-only | mandatory | A unique value used by the adapter to identify fax ports. |
| 1.3.6.1.4.1.641.3.1.2.1.2 | ColumnfaxPort | read-only | mandatory | The network adapter's port to which this modem is attached. |
| 1.3.6.1.4.1.641.3.1.2.1.3 | ColumnfaxAdapterCapabilities | read-only | mandatory | A bitmap representing the fax capabilities of the network adapter. Bit Value Capabilities 0 1 Fine Resolution 1 2 2D Encoding 2 4 T6 Encoding 3 8 ECM 4 16 Bina… |
| 1.3.6.1.4.1.641.3.1.2.1.4 | ColumnfaxModemCapabilities | read-only | mandatory | A bitmap representing the fax capabilities of the attached modem. Bit Value Capabilities 0 1 Fine Resolution 1 2 2D Encoding 2 4 T6 Encoding 3 8 ECM 4 16 Binar… |
| 1.3.6.1.4.1.641.3.1.2.1.5 | ColumnfaxSelectedCapabilities | read-write | mandatory | A bitmap representing the user selected fax capabilities. Bit Value Capabilities 0 1 Fine Resolution 1 2 2D Encoding 2 4 T6 Encoding 3 8 ECM 4 16 Binary File T… |
| 1.3.6.1.4.1.641.3.1.2.1.6 | ColumnfaxActiveCapabilities | read-only | mandatory | A bitmap representing the active fax capabilities. This is the logical and of faxAdapterCapabilities, faxModemCapabilities, and faxSelectedCapabilities. Bit Va… |
| 1.3.6.1.4.1.641.3.1.2.1.7 | ColumnfaxIDString | read-write | mandatory | The textual identification that is used to identify this fax device. This text is sent to a connected fax device at the start of a call. |
| 1.3.6.1.4.1.641.3.1.2.1.8 | ColumnfaxInitString | read-write | mandatory | The commands used be the network adapter to initialize an attached modem. |
| 1.3.6.1.4.1.641.3.1.2.1.9 | ColumnfaxNumberRings | read-write | mandatory | The number of rings that the network adapter should wait before answering. |
| 1.3.6.1.4.1.641.3.1.2.1.10 | ColumnfaxScaling | read-write | mandatory | The mechanism used to resolve size descrepancies between the received fax the printer's available forms. |
| 1.3.6.1.4.1.641.3.1.2.1.11 | ColumnfaxBinaryEncoding | read-write | mandatory | The encoding used when sending fax data to the attached printer. |
| 1.3.6.1.4.1.641.3.1.2.1.13 | ColumnfaxPrinterPort | read-write | mandatory | The port (printer) to which received faxes should be printed. |
| 1.3.6.1.4.1.641.3.1.2.1.14 | ColumnfaxInputTray | read-write | mandatory | The input tray from which received faxes should be printed. The value 255 indicates printer default. |
| 1.3.6.1.4.1.641.3.1.2.1.15 | ColumnfaxOutputBin | read-write | mandatory | The output bin to which received faxes should be printed. The value 255 indicates printer default. |