LINK-INCIDENT-MIB
84 objects
The MIB module defines support for FICON in Fabos. This MIB addresses link incident and link failure data for ficon host/devices connected to a Brocade switch
Imported Objects
| Brocade-REG-MIB | fcSwitch |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1588.2.1.1.50 | IdentitylinkIncidentMIB | The MIB module defines support for FICON in Fabos. This MIB addresses link incident and link failure data for ficon host/devices connected to a Brocade switch | ||
| 1.3.6.1.4.1.1588.2.1.1.50.2 | IdentityficonRNID | current | The OID sub-tree for ficonRNID. This group contains all RNID group objects for FICON. | |
| 1.3.6.1.4.1.1588.2.1.1.50.2.1 | ScalarnodeRNIDTableNumEntries | read-only | current | The number of entries in Request Node Identification Data (RNID) table. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.2 | TablenodeRNIDTable | not-accessible | current | A table that contains, one entry for each Ficon RNID node attached to a switch. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.2.1 | RownodeRNIDEntry | not-accessible | current | A entry containing the RNID information for a ficon node |
| 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.1 | ColumnnodeRNIDIndex | read-only | current | Index into nodeRNIDTable |
| 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.2 | ColumnnodeRNIDIncidentPortWWN | read-only | current | Port WWN for Incident port. An N-port (ficon device or host) is an incident port |
| 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.3 | ColumnnodeRNIDPID | read-only | current | PID for an Incident port. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.4 | ColumnnodeRNIDFlags | read-only | current | RNID flags for an Incident port. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.5 | ColumnnodeRNIDType | read-only | current | Number associate with a node |
| 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.6 | ColumnnodeRNIDModel | read-only | current | Model number of the RNID node |
| 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.7 | ColumnnodeRNIDManufacturer | read-only | current | Identifies the manufaturer of the node. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.8 | ColumnnodeRNIDManufacturerPlant | read-only | current | Identifies the manufacturer plant of the node. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.9 | ColumnnodeRNIDSequenceNumber | read-only | current | Identifies the sequence number of the node. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.10 | ColumnnodeRNIDConnectedPortWWN | read-only | current | WWN of the connected port. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.11 | ColumnnodeRNIDPortType | read-only | current | Port type (N, E, NL or virtual port) of the connected port. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.12 | ColumnnodeRNIDFormat | read-only | current | Node identification data format of the connected port. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.13 | ColumnnodeRNIDTag | read-only | current | Node identification tag of the connected port. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.14 | ColumnnodeRNIDParams | read-only | current | Node parameters of the connected port. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.3 | ScalarswitchRNIDTableNumEntries | read-only | current | The number of entries in RNID table which corresponds to switch. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.4 | TableswitchRNIDTable | not-accessible | current | A table that contains, one entry for each switch ficon node. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.4.1 | RowswitchRNIDEntry | not-accessible | current | |
| 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.1 | ColumnswitchRNIDIndex | read-only | current | Index into switchRNIDTable. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.2 | ColumnswitchRNIDSwitchWWN | read-only | current | WWN of the switch. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.3 | ColumnswitchRNIDFlags | read-only | current | RNID flags for switch. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.4 | ColumnswitchRNIDType | read-only | current | Type Number associate with a switch. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.5 | ColumnswitchRNIDModel | read-only | current | Model number of the RNID switch. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.6 | ColumnswitchRNIDManufacturer | read-only | current | Identifies the manufaturer of the switch. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.7 | ColumnswitchRNIDManufacturerPlant | read-only | current | Identifies the manufacturer plant of the switch. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.8 | ColumnswitchRNIDSequenceNumber | read-only | current | Identifies the sequence number of the switch. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.9 | ColumnswitchRNIDTag | read-only | current | Identification tag of the switch. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.10 | ColumnswitchRNIDParams | read-only | current | Parameters of the switch. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.5 | ScalarnodeVfId | read-only | current | The Virtual fabric id of the switch. For VF unaware switches this value will be 0. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.6 | ScalarficonSlot | read-only | current | It indicates the slot number in the switch. |
| 1.3.6.1.4.1.1588.2.1.1.50.2.7 | ScalarficonPort | read-only | current | It indicates the port number in the switch. |
| 1.3.6.1.4.1.1588.2.1.1.50.3 | IdentityficonLIRR | current | The OID sub-tree for ficonLIRR. This group contains all LIRR group objects for FICON. | |
| 1.3.6.1.4.1.1588.2.1.1.50.3.1 | ScalarlIRRTableNumEntries | read-only | current | The number of entries in Link Incident Record Registration (LIRR) table |
| 1.3.6.1.4.1.1588.2.1.1.50.3.2 | TablelIRRTable | not-accessible | current | A table that contains, one entry for each LIRR incident for an attached FICON device. |
| 1.3.6.1.4.1.1588.2.1.1.50.3.2.1 | RowlIRREntry | not-accessible | current | An entry containing LIRR information. |
| 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.1 | ColumnlIRRIndex | read-only | current | Index into the LIRR table. |
| 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.2 | ColumnlIRRListenerPortWWN | read-only | current | WWN of the Listener port. |
| 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.3 | ColumnlIRRListenerPID | read-only | current | PID for the listener port. |
| 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.4 | ColumnlIRRRegType | read-only | current | Registration type - conditional or unconditional. |
| 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.5 | ColumnlIRRProtocol | read-only | current | Protocol type supported. |
| 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.6 | ColumnlIRRPortType | read-only | current | Attached port type. |
| 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.7 | ColumnlIRRFormat | read-only | current | Registration type - conditional or unconditional. |
| 1.3.6.1.4.1.1588.2.1.1.50.4 | IdentityficonRLIR | current | The OID sub-tree for ficonRLIR. This group contains all RLIR group objects for FICON. | |
| 1.3.6.1.4.1.1588.2.1.1.50.4.1 | ScalarrLIRTableNumEntries | read-only | current | The number of entries in switch Registered Link Incident Report (RLIR) table |
| 1.3.6.1.4.1.1588.2.1.1.50.4.2 | TablerLIRTable | not-accessible | current | A table that contains, one entry for each LIRR incident for an attached FICON device. |
| 1.3.6.1.4.1.1588.2.1.1.50.4.2.1 | RowrLIREntry | not-accessible | current | An entry containing RLIR information. |
| 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.1 | ColumnrLIRIndex | read-only | current | Index into RLIR table. |
| 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.2 | ColumnrLIRIncidentPortWwn | read-only | current | Port WWN for RLIR Incident port. |
| 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.3 | ColumnrLIRIncidentNodeWwn | read-only | current | Incident node WWN. |
| 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.5 | ColumnrLIRIncidentPortType | read-only | current | RLIR Incident port type. |
| 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.6 | ColumnrLIRIncidentPID | read-only | current | RLIR Incident PID. |
| 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.7 | ColumnrLIRIncidentPortNumber | read-only | current | RLIR Incident port number.This is vendor specific port number. |
| 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.8 | ColumnrLIRConnectedPortWwn | read-only | current | RLIR Connected port WWN. |
| 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.9 | ColumnrLIRConnectedNodeWwn | read-only | current | RLIR Connected node WWN. |
| 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.10 | ColumnrLIRFabricWwn | read-only | current | RLIR Fabric Wwn. |
| 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.11 | ColumnrLIRLinkFailureType | read-only | current | RLIR Link failure type. |
| 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.12 | ColumnrLIRTimeStamp | read-only | current | RLIR time stamp. |
| 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.13 | ColumnrLIRFormat | read-only | current | RLIR Format. |
| 1.3.6.1.4.1.1588.2.1.1.50.21 | IdentitylinkIncidentMIBTraps | current | The OID sub-tree for Link Incident trap. | |
| 1.3.6.1.4.1.1588.2.1.1.50.21.0 | IdentitylinkIncidentMIBTrapPrefix | current | The Link Incident traps. | |
| 1.3.6.1.4.1.1588.2.1.1.50.21.0.1 | NotificationlinkRNIDDeviceRegistration | current | A device registered with the switch | |
| 1.3.6.1.4.1.1588.2.1.1.50.21.0.2 | NotificationlinkRNIDDeviceDeRegistration | current | A device de-regsitered with the switch | |
| 1.3.6.1.4.1.1588.2.1.1.50.21.0.3 | NotificationlinkLIRRListenerAdded | current | A listener for link failure incident is added | |
| 1.3.6.1.4.1.1588.2.1.1.50.21.0.4 | NotificationlinkLIRRListenerRemoved | current | A listener for link failure incident is removed | |
| 1.3.6.1.4.1.1588.2.1.1.50.21.0.5 | NotificationlinkRLIRFailureIncident | current | A link failure incident has occured. The value of lIRRIndex will be -2147483647 and lIRRListenerPID will be 0 (zero) , if there is no listener for incident. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FcPortID | OCTET STRING (SIZE (3)) | current | Represents Fibre Channel Address ID, a 24-bit value unique within the address space of a Fabric. |
| LinkFormat | INTEGER { ficon(1), common(2) } | current | Represents the frame format |
| LinkWwn | OCTET STRING (SIZE (8)) | current | Represents the link WWN |
| LIRRProtocol | INTEGER { fcp (1), sb2 (2) } | current | Represents the LIRR Protocol |
| PortType | INTEGER { n-port (1), nl-port (2), e-port (3) } | current | Represents the Port Type |
| RegType | INTEGER { conditional (1), unconditional (2) } | current | Represents the RNID Registration Type |
| RLIRLinkFailureType | INTEGER { bitErrorRate(2), lossOfSignal(3), nOSRecognized(4), primitiveSequenceTimeout(5), invalidSeqForPortState(6), loopInitializationTimeout(7), lossOfSignalInLoopInit(8) } | current | Represents the link failure type |
| RNIDFlags | OCTET STRING (SIZE(1)) | current | Represents the value of RNID Flag in Hexa Decimal format. It indicates if the node is valid, not valid, or not current. The ``Flag'' values also indi- cate the following: 0x00 Indicates node ID of the (storage port for … |
| RNIDManufacturer | OCTET STRING (SIZE (3)) | current | Represents the Manufacturer name or code. |
| RNIDManufacturerPlant | OCTET STRING (SIZE (2)) | current | The manufacture plant name or code. |
| RNIDModel | OCTET STRING (SIZE (3)) | current | Represents the value of Model Number. |
| RNIDParams | OCTET STRING (SIZE (3)) ficonRNID OBJECT-IDENTITY STATUS current DESCRIPTION "The OID sub-tree for ficonRNID. This group contains all RNID group objects for FICON." ::= { linkIncidentMIB 2 } | current | Represents the value of Param. It is the incident node parameters type in three bytes: ``0xAABBCC''. The meaning of each byte is described below: Byte AA: 0x00 Reserved 0x20 FC-SB-2 and updates. 0x40 Other FC-4s includi… |
| RNIDSequenceNumber | OCTET STRING (SIZE (12)) | current | Sequence number of the self describing node. |
| RNIDTagType | OCTET STRING (SIZE (2)) | current | Represents the value of RNID Tag in Hexa Decimal format |
| RNIDType | OCTET STRING (SIZE (6)) | current | Represents the value of Type Number - Displays the type number of the self describing node. It also describes the machine type. |