LINKSYS-WLAN-ACCESS-POINT-MIB
881 objects
Private MIB for LAPAC1750PRO Wireless Access Point
Imported Objects
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| LINKSYS-WLAN-ACCESS-POINT-REF-MIB | smb |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3955.1000.203 | Identitywap03 | Private MIB for LAPAC1750PRO Wireless Access Point | ||
| 1.3.6.1.4.1.3955.1000.203.1 | NodeapGlobalConfig | |||
| 1.3.6.1.4.1.3955.1000.203.1.1 | NodeapSysConfig | |||
| 1.3.6.1.4.1.3955.1000.203.1.1.1 | ScalarapSysConfPasswd | read-write | current | Configures administrative password to access CLI and Web User Interface. Administrator password contains characters from at least 3 of the following 4 categori… |
| 1.3.6.1.4.1.3955.1000.203.1.1.2 | ScalarapSysConfModel | read-only | current | Hardware model of this system. |
| 1.3.6.1.4.1.3955.1000.203.1.1.3 | ScalarapSysConfVersion | read-only | current | Version number of the software running on the AP. |
| 1.3.6.1.4.1.3955.1000.203.1.1.4 | ScalarapSysConfPlatform | read-only | current | Hardware platform for the AP. |
| 1.3.6.1.4.1.3955.1000.203.1.1.6 | ScalarapSysConfBaseMac | read-only | current | Base MAC address of the AP. The Lowest MAC Address from a 24-address block. |
| 1.3.6.1.4.1.3955.1000.203.1.1.7 | ScalarapSysConfSerialNumber | read-only | current | Serial Number of the AP. |
| 1.3.6.1.4.1.3955.1000.203.1.1.9 | ScalarapSysConfPasswdComplexitySupport | read-write | current | Enable/Disable the enforecement of minimum complexity of User Passwords. |
| 1.3.6.1.4.1.3955.1000.203.1.1.10 | ScalarapSysConfPasswdMinCharClass | read-write | current | Indicates the minimum character class of User Passwords. |
| 1.3.6.1.4.1.3955.1000.203.1.1.12 | ScalarapSysConfPasswdMinLength | read-write | current | Indicates how much minimum length of User Passwords is mandatory, if Minimum Length constraint is enabled. |
| 1.3.6.1.4.1.3955.1000.203.1.1.13 | ScalarapSysConfPasswdMaxLength | read-write | current | Indicates how much maximum length of User Passwords is allowed. |
| 1.3.6.1.4.1.3955.1000.203.1.1.14 | ScalarapSysConfPasswdAgingSupport | read-write | current | Enable/Disable the enforcement of aging feature of User Passwords. |
| 1.3.6.1.4.1.3955.1000.203.1.1.15 | ScalarapSysConfPasswdAgingTime | read-write | current | Indicates in how many days, User Passwords will age, if Password Aging constraint is enabled. |
| 1.3.6.1.4.1.3955.1000.203.1.1.16 | ScalarapSysConfPasswdDiffFrmCurr | read-write | current | Enable/Disable to allow/prevent repetition of same User Password as new User Password. |
| 1.3.6.1.4.1.3955.1000.203.1.1.17 | ScalarapSysConfWpaPskComplexitySupport | read-write | current | Enable/Disable the enforecement of minimum complexity of WPA-PSK. |
| 1.3.6.1.4.1.3955.1000.203.1.1.18 | ScalarapSysConfWpaPskMinCharClass | read-write | current | Indicates the minimum character class of WPA-PSK. |
| 1.3.6.1.4.1.3955.1000.203.1.1.20 | ScalarapSysConfWpaPskMinLength | read-write | current | Indicates the minimum length of WPA-PSK. |
| 1.3.6.1.4.1.3955.1000.203.1.1.21 | ScalarapSysConfWpaPskMaxLength | read-write | current | Indicates the maximum length of WPA-PSK. |
| 1.3.6.1.4.1.3955.1000.203.1.1.22 | ScalarapSysConfWpaPskDiffFrmCurr | read-write | current | Enable/Disable to allow/prevent repetition of same WPA-PSK as new WPA-PSK. |
| 1.3.6.1.4.1.3955.1000.203.1.1.23 | ScalarapSysConfMD5Checksum | read-only | current | Firmware MD5checksum for the AP. |
| 1.3.6.1.4.1.3955.1000.203.1.1.24 | ScalarapSysConfUsername | read-write | current | The name of the administrative user already configured in the system. The name can be up to 32 alphanumeric characters (including '-' and '_'). The default nam… |
| 1.3.6.1.4.1.3955.1000.203.1.1.25 | ScalarapSysConfUserAccountsMax | read-only | current | The maximum number of guest user accounts in the system. |
| 1.3.6.1.4.1.3955.1000.203.1.1.26 | ScalarapSysConfUserAccountsConfigured | read-only | current | The number of guest user accounts currently configured in the system. |
| 1.3.6.1.4.1.3955.1000.203.1.1.27 | TableapSysConfUserAccountTable | not-accessible | current | A table of configurable user accounts. |
| 1.3.6.1.4.1.3955.1000.203.1.1.27.1 | RowapSysConfUserAccountEntry | not-accessible | current | A configurable user account entry. |
| 1.3.6.1.4.1.3955.1000.203.1.1.27.1.1 | ColumnapUserIndex | not-accessible | current | The user account entry index. |
| 1.3.6.1.4.1.3955.1000.203.1.1.27.1.2 | ColumnapUserRowStatus | read-create | current | Status of an entry. Supported values are: active(1) - Indicates user account is active. createAndGo(4) - Set to this value to create a user account. destroy(6)… |
| 1.3.6.1.4.1.3955.1000.203.1.1.27.1.3 | ColumnapUserName | read-create | current | The user account entry name. The name can be up to 32 alphanumeric characters (including '-' and '_'). |
| 1.3.6.1.4.1.3955.1000.203.1.1.27.1.4 | ColumnapUserPassword | read-create | current | The password associated with the user account. Password contains characters from at least 3 of the following 4 categories: Uppercase letters, Lowercase letters… |
| 1.3.6.1.4.1.3955.1000.203.1.1.27.1.5 | ColumnapUserType | read-only | current | The user account entry type. |
| 1.3.6.1.4.1.3955.1000.203.1.2 | Nodei802System | |||
| 1.3.6.1.4.1.3955.1000.203.1.2.1 | Scalari802SystemReboot | read-write | current | Setting this object will cause the device to reboot. The actual value is ignored. |
| 1.3.6.1.4.1.3955.1000.203.1.2.2 | Scalari802SystemPersistConfig | read-write | current | Setting this object will cause the running config to be saved to the start-up config. The actual value is ignored. |
| 1.3.6.1.4.1.3955.1000.203.1.2.3 | Scalari802SystemFactoryReset | read-write | current | Setting this object to 'reset' will reset present configuration to factory defaults. System will reboot after setting configuration to its default.The actual v… |
| 1.3.6.1.4.1.3955.1000.203.1.2.4 | Scalari802SystemActivateBackupImage | read-write | current | Setting this object to activate backup image if the platform supports dual image and the backup image is a valid image. System will reboot to activate the back… |
| 1.3.6.1.4.1.3955.1000.203.1.3 | NodemanagedAPConfig | |||
| 1.3.6.1.4.1.3955.1000.203.1.3.1 | ScalarapMode | read-write | current | Indicates if the managed AP Admnistrative mode is up or down. |
| 1.3.6.1.4.1.3955.1000.203.1.3.2 | ScalarapState | read-only | current | State of the AP as it transitions from standalone to managed. Once in the managed mode, its cofiguration and stats actions are performed through a management s… |
| 1.3.6.1.4.1.3955.1000.203.1.3.3 | ScalarapSwitchAddress1 | read-write | current | First switch IP Address to manage the Wireless Access Point. |
| 1.3.6.1.4.1.3955.1000.203.1.3.4 | ScalarapSwitchAddress1Type | read-only | current | Type of the IP Address as defined in the InetAddress MIB for managing the Wireless Access Point. This value depends on switch IP Address 1. Only IPv4 addresses… |
| 1.3.6.1.4.1.3955.1000.203.1.3.5 | ScalarapSwitchAddress2 | read-write | current | Second switch IP Address to manage Wireless Access Point. |
| 1.3.6.1.4.1.3955.1000.203.1.3.6 | ScalarapSwitchAddress2Type | read-only | current | Type of the IP Address as defined in the InetAddress MIB for managing the Wireless Access Point. This value depends on switch IP Address 2. Only IPv4 addresses… |
| 1.3.6.1.4.1.3955.1000.203.1.3.7 | ScalarapSwitchAddress3 | read-write | current | Third switch IP Address to manage the Wireless Access Point. |
| 1.3.6.1.4.1.3955.1000.203.1.3.8 | ScalarapSwitchAddress3Type | read-only | current | Type of the IP Address as defined in the InetAddress MIB for managing the Wireless Access Point. This value depends on switch IP Address 3. Only IPv4 addresses… |
| 1.3.6.1.4.1.3955.1000.203.1.3.9 | ScalarapSwitchAddress4 | read-write | current | Forth switch IP Address to manage the Wireless Access Point. |
| 1.3.6.1.4.1.3955.1000.203.1.3.10 | ScalarapSwitchAddress4Type | read-only | current | Type of the IP Address as defined in the InetAddress MIB for managing the Wireless Access Point. This value depends on switch IP Address 4. Only IPv4 addresses… |
| 1.3.6.1.4.1.3955.1000.203.1.3.11 | ScalarapSwitchPassPhrase | read-write | current | Authentication passphrase for Wireless Access Point. Specify passphrase of length zero to clear the object. |
| 1.3.6.1.4.1.3955.1000.203.1.3.12 | ScalarapDhcpAddress1 | read-only | current | First DHCP server IP address from which to get an IP address for the Wireless Access Point. |
| 1.3.6.1.4.1.3955.1000.203.1.3.13 | ScalarapDhcpAddress1Type | read-only | current | Type of the IP address as defined in the InetAddress MIB. This value depends on DHCP server IP Address 1. Only IPv4 addresses are supported. |
| 1.3.6.1.4.1.3955.1000.203.1.3.14 | ScalarapDhcpAddress2 | read-only | current | Second DHCP server IP address from which to get an IP address for the Wireless Access Point. |
| 1.3.6.1.4.1.3955.1000.203.1.3.15 | ScalarapDhcpAddress2Type | read-only | current | Type of the IP address as defined in the InetAddress MIB. This value depends on DHCP server IP Address 2. Only IPv4 addresses are supported. |
| 1.3.6.1.4.1.3955.1000.203.1.3.16 | ScalarapDhcpAddress3 | read-only | current | Third DHCP server IP address from which to get an IP address for the Wireless Access Point. |
| 1.3.6.1.4.1.3955.1000.203.1.3.17 | ScalarapDhcpAddress3Type | read-only | current | Type of the IP address as defined in the InetAddress MIB. This value depends on third DHCP server IP Address. Only IPv4 addresses are supported. |
| 1.3.6.1.4.1.3955.1000.203.1.3.18 | ScalarapDhcpAddress4 | read-only | current | Forth DHCP server IP address from which to get an IP address for the Wireless Access Point. |
| 1.3.6.1.4.1.3955.1000.203.1.3.19 | ScalarapDhcpAddress4Type | read-only | current | Type of the IP address as defined in the InetAddress MIB. This value depends on fourth DHCP server IP Address. Only IPv4 addresses are supported. |
| 1.3.6.1.4.1.3955.1000.203.1.3.20 | ScalarapBasePort | read-only | current | IP port wich is used by AP to communicate with Wireless Switch. |
| 1.3.6.1.4.1.3955.1000.203.1.3.21 | ScalarapCfgBasePort | read-write | current | Manually configured IP port wich is used by AP to communicate with Wireless Switch. |
| 1.3.6.1.4.1.3955.1000.203.1.3.22 | ScalarapDhcpBasePort | read-only | current | DHCP assigned IP port which is used by the AP to communicate with the Wireless Switch. |
| 1.3.6.1.4.1.3955.1000.203.1.3.23 | ScalarapWdsSatelliteMode | read-write | current | WDS managed AP satellite mode. |
| 1.3.6.1.4.1.3955.1000.203.1.3.24 | ScalarapWdsEthernetPortMode | read-write | current | WDS managed AP Ethernet port mode. |
| 1.3.6.1.4.1.3955.1000.203.1.3.25 | ScalarapWdsGroupPassword | read-write | current | Configure the password used for WDS managed AP group authentication. ASCII printable characters are allowed, which includes upper and lower case alphabetic let… |
| 1.3.6.1.4.1.3955.1000.203.1.4 | NodeapConfigSupplicant | |||
| 1.3.6.1.4.1.3955.1000.203.1.4.1 | ScalarapSupplicantConfigStatus | read-write | current | Indicates whether 802.1x supplicant is enabled on this AP. |
| 1.3.6.1.4.1.3955.1000.203.1.4.2 | ScalarapSupplicantConfigUser | read-write | current | Indicates the user name/identity used for 802.1x supplicant authentication. ASCII printable characters are allowed, which includes upper and lower case alphabe… |
| 1.3.6.1.4.1.3955.1000.203.1.4.3 | ScalarapSupplicantConfigPassword | read-write | current | Configure the password used for 802.1X supplicant authentication. If apSupplicantConfigEapMethod is set to md5 or peap, this value is the user's password. If a… |
| 1.3.6.1.4.1.3955.1000.203.1.4.4 | ScalarapSupplicantConfigEapMethod | read-write | current | Configure the EAP Method used for 802.1X supplicant authentication. |
| 1.3.6.1.4.1.3955.1000.203.1.4.5 | ScalarapSupplicantCertificateFilePresent | read-only | current | Inidicates whether the TLS certificate file is present for use with 802.1X supplicant authentication. |
| 1.3.6.1.4.1.3955.1000.203.1.4.6 | ScalarapSupplicantCertificateFileExpirationDate | read-only | current | The expiration date of the TLS certificate |
| 1.3.6.1.4.1.3955.1000.203.1.4.7 | NodeapSupplicantCertificateUpload | |||
| 1.3.6.1.4.1.3955.1000.203.1.4.7.1 | ScalarapSupplicantCertificateTFTPServerAddressType | read-only | current | Type of the IP address as defined in the InetAddress MIB. This is the address type of the TFTP server. |
| 1.3.6.1.4.1.3955.1000.203.1.4.7.2 | ScalarapSupplicantCertificateTFTPServerAddress | read-write | current | The address of the TFTP Server from which to get the certificate file. |
| 1.3.6.1.4.1.3955.1000.203.1.4.7.3 | ScalarapSupplicantCertificateTFTPServerPort | read-write | current | The port on the TFTP Server from which to get the certificate file. |
| 1.3.6.1.4.1.3955.1000.203.1.4.7.4 | ScalarapSupplicantCertificateUploadDirectory | read-write | current | Directory on the server from which to get the certificate file. This directory name does not contain the filename. |
| 1.3.6.1.4.1.3955.1000.203.1.4.7.5 | ScalarapSupplicantCertificateUploadFilename | read-write | current | File name on the server of the certificate file. |
| 1.3.6.1.4.1.3955.1000.203.1.4.7.6 | ScalarapSupplicantCertificateUploadProtocol | read-only | current | The protocol used for uploading the certificate file. |
| 1.3.6.1.4.1.3955.1000.203.1.4.7.7 | ScalarapSupplicantCertificateUploadStart | read-write | current | This object initiates the certificate file upload to the AP. |
| 1.3.6.1.4.1.3955.1000.203.1.4.7.8 | ScalarapSupplicantCertificateUploadStatus | read-only | current | The upload status of the certificate file to the AP. |
| 1.3.6.1.4.1.3955.1000.203.1.5 | NodeapHost | |||
| 1.3.6.1.4.1.3955.1000.203.1.5.1 | ScalarapHostId | read-write | current | Hostname of this system. This can be concatenated with apHostDomain to form the Fully Qualified Domain Name (FQDN) for this AP. |
| 1.3.6.1.4.1.3955.1000.203.1.5.2 | ScalarapHostDns1Type | read-only | current | The address type for the first entry in the DNS server list. Value of address type depends on first DNS server address. |
| 1.3.6.1.4.1.3955.1000.203.1.5.3 | ScalarapHostDns1Addr | read-only | current | Address of the first entry in the active DNS server list. |
| 1.3.6.1.4.1.3955.1000.203.1.5.4 | ScalarapHostDns2Type | read-only | current | Address type for the second entry in the DNS Server List. Value of address type depends on second DNS server address DNS name. |
| 1.3.6.1.4.1.3955.1000.203.1.5.5 | ScalarapHostDns2Addr | read-only | current | Address of the second entry in the active DNS server list. |
| 1.3.6.1.4.1.3955.1000.203.1.5.6 | ScalarapHostDomain | read-only | current | Domain name for this host. Can be appended to apHostId to form the Fully Qualified Domain Name (FQDN) for this system. |
| 1.3.6.1.4.1.3955.1000.203.1.5.7 | ScalarapHostStatDns1Type | read-only | current | The type of apHostStatDns1Addr. |
| 1.3.6.1.4.1.3955.1000.203.1.5.8 | ScalarapHostStatDns1Addr | read-write | current | Address that will be used as the first entry in the DNS server list if apHostDnsViaDhcp is false or no DNS server list is supplied by DHCP. |
| 1.3.6.1.4.1.3955.1000.203.1.5.9 | ScalarapHostStatDns2Type | read-only | current | The type of apHostStatDns2Addr. |
| 1.3.6.1.4.1.3955.1000.203.1.5.10 | ScalarapHostStatDns2Addr | read-write | current | Address that will be used as the second entry in the DNS server list if apHostDnsViaDhcp is false or no DNS server list is supplied by DHCP. |
| 1.3.6.1.4.1.3955.1000.203.1.5.11 | ScalarapHostStatDomain | read-write | current | Domain name to be used if apHostDnsViaDhcp is false or a domain name is not supplied by DHCP. |
| 1.3.6.1.4.1.3955.1000.203.1.5.12 | ScalarapHostDnsViaDhcp | read-write | current | Indicates whether or not this host will try to obtain DNS server information from a DHCP server. |
| 1.3.6.1.4.1.3955.1000.203.1.5.13 | ScalarapHostDnsipv61Type | read-only | current | The address type for the first entry in the DNS server list. Value of address type depends on first DNSv6 server address. |
| 1.3.6.1.4.1.3955.1000.203.1.5.14 | ScalarapHostDnsipv61Addr | read-only | current | Address of the first entry in the active DNSv6 server list. |
| 1.3.6.1.4.1.3955.1000.203.1.5.15 | ScalarapHostDnsipv62Type | read-only | current | Address type for the second entry in the DNS Server List. Value of address type depends on second DNSv6 server address DNS name. |
| 1.3.6.1.4.1.3955.1000.203.1.5.16 | ScalarapHostDnsipv62Addr | read-only | current | Address of the second entry in the active DNSv6 server list. |
| 1.3.6.1.4.1.3955.1000.203.1.5.17 | ScalarapHostStatDnsipv61Type | read-only | current | The type of apHostStatDnsipv61Addr. |
| 1.3.6.1.4.1.3955.1000.203.1.5.18 | ScalarapHostStatDnsipv61Addr | read-write | current | Address that will be used as the first entry in the DNS server list if apHostDnsViaDhcpv6 is false or no DNS server list is supplied by DHCP. |
| 1.3.6.1.4.1.3955.1000.203.1.5.19 | ScalarapHostStatDnsipv62Type | read-only | current | The type of apHostStatDnsipv62Addr. |
| 1.3.6.1.4.1.3955.1000.203.1.5.20 | ScalarapHostStatDnsipv62Addr | read-write | current | Address that will be used as the second entry in the DNS server list if apHostDnsViaDhcpv6 is false or no DNS server list is supplied by DHCP. |
| 1.3.6.1.4.1.3955.1000.203.1.5.21 | ScalarapHostDnsViaDhcpv6 | read-write | current | Indicates whether or not this host will try to obtain DNS server information from a DHCPv6 server. |
| 1.3.6.1.4.1.3955.1000.203.1.6 | NodeapMgmtAccess | |||
| 1.3.6.1.4.1.3955.1000.203.1.6.1 | ScalarapMgmtAccTelnet | read-write | current | Indicates whether management access is allowed through the Telnet interface. |
| 1.3.6.1.4.1.3955.1000.203.1.6.2 | ScalarapMgmtAccHttpsStatus | read-write | current | Indicates whether management access is allowed through the HTTPS interface. |
| 1.3.6.1.4.1.3955.1000.203.1.6.3 | ScalarapMgmtAccHttpStatus | read-write | current | Indicates whether management access is allowed through the HTTP interface. |
| 1.3.6.1.4.1.3955.1000.203.1.6.4 | ScalarapMgmtAccHttpPort | read-write | current | Indicates the port on which the web server will be enabled. |
| 1.3.6.1.4.1.3955.1000.203.1.6.5 | ScalarapMgmtAccSerial | read-write | current | Indicates whether management access is allowed through the Serial interface. |
| 1.3.6.1.4.1.3955.1000.203.1.6.6 | ScalarapMgmtAccNtp | read-write | current | Indicates whether the Network Time Protocol(NTP) server will be enabled. |
| 1.3.6.1.4.1.3955.1000.203.1.6.7 | ScalarapMgmtAccNtpAddrType | read-write | current | Indicates the type of address being used for the NTP server. IP addresses or hostname. The inet address type must be configured before configuring IP address o… |
| 1.3.6.1.4.1.3955.1000.203.1.6.8 | ScalarapMgmtAccNtpAddr | read-write | current | Indicates the address(DNS/IP address) of the NTP server. The inet address type must be configured before configuring IP address or domain name |
| 1.3.6.1.4.1.3955.1000.203.1.6.9 | ScalarapMgmtAccACLMode | read-write | current | Indicates whether management ACL for WEB sessions, CLI and SNMP is enabled or disabled. |
| 1.3.6.1.4.1.3955.1000.203.1.6.10 | ScalarapMgmtAccACLIpAddr1Type | read-only | current | The Internet address type of apMgmtAccACLIpAddr1. |
| 1.3.6.1.4.1.3955.1000.203.1.6.11 | ScalarapMgmtAccACLIpAddr1 | read-write | current | Indicates the IPv4 address of the host that can have web, cli and snmp access to the AP. |
| 1.3.6.1.4.1.3955.1000.203.1.6.12 | ScalarapMgmtAccACLIpAddr2Type | read-only | current | The Internet address type of apMgmtAccACLIpAddr2. |
| 1.3.6.1.4.1.3955.1000.203.1.6.13 | ScalarapMgmtAccACLIpAddr2 | read-write | current | Indicates the IPv4 address of the host that can have web, cli and snmp access to the AP. |
| 1.3.6.1.4.1.3955.1000.203.1.6.14 | ScalarapMgmtAccACLIpAddr3Type | read-only | current | The Internet address type of apMgmtAccACLIpAddr3. |
| 1.3.6.1.4.1.3955.1000.203.1.6.15 | ScalarapMgmtAccACLIpAddr3 | read-write | current | Indicates the IPv4 address of the host that can have web, cli and snmp access to the AP. |
| 1.3.6.1.4.1.3955.1000.203.1.6.16 | ScalarapMgmtAccACLIpAddr4Type | read-only | current | The Internet address type of apMgmtAccACLIpAddr4. |
| 1.3.6.1.4.1.3955.1000.203.1.6.17 | ScalarapMgmtAccACLIpAddr4 | read-write | current | Indicates the IPv4 address of the host that can have web, cli and snmp access to the AP. |
| 1.3.6.1.4.1.3955.1000.203.1.6.18 | ScalarapMgmtAccACLIpAddr5Type | read-only | current | The Internet address type of apMgmtAccACLIpAddr5. |
| 1.3.6.1.4.1.3955.1000.203.1.6.19 | ScalarapMgmtAccACLIpAddr5 | read-write | current | Indicates the IPv4 address of the host that can have web, cli and snmp access to the AP. |
| 1.3.6.1.4.1.3955.1000.203.1.6.20 | ScalarapMgmtAccACLIpv6Addr1Type | read-only | current | The Internet address type of apMgmtAccACLIpv6Addr1. |
| 1.3.6.1.4.1.3955.1000.203.1.6.21 | ScalarapMgmtAccACLIpv6Addr1 | read-write | current | Indicates the IPv6 address of the host that can have web, cli and snmp access to the AP. |
| 1.3.6.1.4.1.3955.1000.203.1.6.22 | ScalarapMgmtAccACLIpv6Addr2Type | read-only | current | The Internet address type of apMgmtAccACLIpv6Addr2. |
| 1.3.6.1.4.1.3955.1000.203.1.6.23 | ScalarapMgmtAccACLIpv6Addr2 | read-write | current | Indicates the IPv6 address of the host that can have web, cli and snmp access to the AP. |
| 1.3.6.1.4.1.3955.1000.203.1.6.24 | ScalarapMgmtAccACLIpv6Addr3Type | read-only | current | The Internet address type of apMgmtAccACLIpv6Addr3. |
| 1.3.6.1.4.1.3955.1000.203.1.6.25 | ScalarapMgmtAccACLIpv6Addr3 | read-write | current | Indicates the IPv6 address of the host that can have web, cli and snmp access to the AP. |
| 1.3.6.1.4.1.3955.1000.203.1.6.26 | ScalarapMgmtAccACLIpv6Addr4Type | read-only | current | The Internet address type of apMgmtAccACLIpv6Addr4. |
| 1.3.6.1.4.1.3955.1000.203.1.6.27 | ScalarapMgmtAccACLIpv6Addr4 | read-write | current | Indicates the IPv6 address of the host that can have web, cli and snmp access to the AP. |
| 1.3.6.1.4.1.3955.1000.203.1.6.28 | ScalarapMgmtAccACLIpv6Addr5Type | read-only | current | The Internet address type of apMgmtAccACLIpv6Addr5. |
| 1.3.6.1.4.1.3955.1000.203.1.6.29 | ScalarapMgmtAccACLIpv6Addr5 | read-write | current | Indicates the IPv6 address of the host that can have web, cli and snmp access to the AP. |
| 1.3.6.1.4.1.3955.1000.203.1.6.30 | ScalarapMgmtAccSerialSpeed | read-write | current | Speed of the Serial Port. |
| 1.3.6.1.4.1.3955.1000.203.1.6.31 | ScalarapMgmtAccSsh | read-write | current | Indicates whether management access is allowed through the SSH interface. |
| 1.3.6.1.4.1.3955.1000.203.1.6.32 | ScalarapMgmtAccGenSslCert | read-write | current | Setting this object will cause the SSL certificate to be regenerated. The https server will be cycled. |
| 1.3.6.1.4.1.3955.1000.203.1.6.33 | ScalarapMgmtAccSessionMax | read-write | current | Indicates the maximum number of web sessions allowed at any one time ... the combined number of http and https sessions. |
| 1.3.6.1.4.1.3955.1000.203.1.6.34 | ScalarapMgmtAccSessionTimeout | read-write | current | Indicates the web session timeout in minutes. This applies to both http and https sessions. |
| 1.3.6.1.4.1.3955.1000.203.1.6.35 | ScalarapMgmtAccBonjourStatus | read-write | current | Indicates whether Bonjour is enabled on the device. |
| 1.3.6.1.4.1.3955.1000.203.1.6.36 | ScalarapMgmtAccHttpsPort | read-write | current | Indicates the port on which the web server (https) will be enabled. |
| 1.3.6.1.4.1.3955.1000.203.1.7 | NodeapMgmtConfig | |||
| 1.3.6.1.4.1.3955.1000.203.1.7.1 | ScalarapManagementVlanID | read-write | current | VLAN-ID of the management VLAN. |
| 1.3.6.1.4.1.3955.1000.203.1.7.2 | ScalarapManagementInterface | read-only | current | Interface for management communication. |
| 1.3.6.1.4.1.3955.1000.203.1.7.3 | ScalarapManagementStaticipType | read-only | current | The Internet address type of apManagementStaticip. |
| 1.3.6.1.4.1.3955.1000.203.1.7.4 | ScalarapManagementStaticip | read-write | current | Static IP address of the management interface. |
| 1.3.6.1.4.1.3955.1000.203.1.7.5 | ScalarapManagementStaticMaskType | read-only | current | The Internet address type of apManagementStaticMask. |
| 1.3.6.1.4.1.3955.1000.203.1.7.6 | ScalarapManagementStaticMask | read-write | current | Static mask of the management interface. |
| 1.3.6.1.4.1.3955.1000.203.1.7.7 | ScalarapManagementIPType | read-only | current | The Internet address type of apManagementIP. |
| 1.3.6.1.4.1.3955.1000.203.1.7.8 | ScalarapManagementIP | read-only | current | IP address of the management interface. |
| 1.3.6.1.4.1.3955.1000.203.1.7.9 | ScalarapManagementMaskType | read-only | current | The Internet address type of apManagementMask. |
| 1.3.6.1.4.1.3955.1000.203.1.7.10 | ScalarapManagementMask | read-only | current | IP mask of the management interface. |
| 1.3.6.1.4.1.3955.1000.203.1.7.11 | ScalarapManagementMAC | read-only | current | MAC address of the management interface. |
| 1.3.6.1.4.1.3955.1000.203.1.7.12 | ScalarapManagementDhcpStatus | read-write | current | Indicates whether DHCP is enabled for management interface. |
| 1.3.6.1.4.1.3955.1000.203.1.7.13 | ScalarapUntaggedVlanID | read-write | current | VLAN to which untagged traffic is assigned. |
| 1.3.6.1.4.1.3955.1000.203.1.7.14 | ScalarapUntaggedVlanStatus | read-write | current | Untagged VLAN interface status. |
| 1.3.6.1.4.1.3955.1000.203.1.7.15 | ScalarapManagementIPv6Status | read-write | current | Enable or disable IPv6 support on the management interface. |
| 1.3.6.1.4.1.3955.1000.203.1.7.16 | ScalarapManagementIPv6AutoConfigStatus | read-write | current | Enable or disable IPv6 Auto address configuration support on the management interface. |
| 1.3.6.1.4.1.3955.1000.203.1.7.17 | ScalarapManagementStaticIPv6Type | read-only | current | The Internet address type of apManagementStaticIPv6. |
| 1.3.6.1.4.1.3955.1000.203.1.7.18 | ScalarapManagementStaticIPv6 | read-write | current | Static IPv6 address of the management interface. |
| 1.3.6.1.4.1.3955.1000.203.1.7.19 | ScalarapManagementStaticIPv6PrefixLength | read-write | current | Static prefix length of the static ipv6 address of management interface. |
| 1.3.6.1.4.1.3955.1000.203.1.7.20 | ScalarapManagementAutoConfigLinkLocalType | read-only | current | Internet address type of apManagementAutoConfigLinkLocal. |
| 1.3.6.1.4.1.3955.1000.203.1.7.21 | ScalarapManagementAutoConfigLinkLocal | read-only | current | The Autoconfigured Link local IPv6 address of management interface. |
| 1.3.6.1.4.1.3955.1000.203.1.7.22 | ScalarapManagementAutoConfigIPv6GlobalType | read-only | current | Internet address type of apManagementAutoConfigIPv6Global. |
| 1.3.6.1.4.1.3955.1000.203.1.7.23 | ScalarapManagementAutoConfigIPv6Global | read-only | current | The Autoconfigured global IPv6 address of management interface. |
| 1.3.6.1.4.1.3955.1000.203.1.7.24 | ScalarapManagementStaticIPv6AddrStatus | read-only | current | Indicates the operational status of static IPv6 address assigend to management interface. |
| 1.3.6.1.4.1.3955.1000.203.1.7.25 | ScalarapManagementIPv6 | read-only | current | IPv6 address of the management interface. |
| 1.3.6.1.4.1.3955.1000.203.1.7.26 | ScalarapManagementDhcpv6Status | read-write | current | Indicates whether DHCPv6 is enabled for management interface. |
| 1.3.6.1.4.1.3955.1000.203.1.7.27 | ScalarapManagementIsatapStatus | read-write | current | Indicates whether isatap tunnel is enabled for management interface. |
| 1.3.6.1.4.1.3955.1000.203.1.7.28 | ScalarapManagementIsatapRouterAddrType | read-only | current | The Internet address type of apManagementIsatapRouter. |
| 1.3.6.1.4.1.3955.1000.203.1.7.29 | ScalarapManagementIsatapRouter | read-write | current | Hostname or IP address of isatap router. |
| 1.3.6.1.4.1.3955.1000.203.1.7.30 | ScalarapManagementIsatapSolicitInterval | read-write | current | Indicates the range for solicitation request. |
| 1.3.6.1.4.1.3955.1000.203.1.7.31 | ScalarapManagementIsatapQueryInterval | read-write | current | Indicates the range for query interval. |
| 1.3.6.1.4.1.3955.1000.203.1.7.32 | ScalarapManagementIsatapAutoConfigLinkLocalType | read-only | current | Internet address type of apManagementIsatapAutoConfigLinkLocal. |
| 1.3.6.1.4.1.3955.1000.203.1.7.33 | ScalarapManagementIsatapAutoConfigLinkLocal | read-only | current | The Autoconfigured Link local IPv6 address of ISATAP interface. |
| 1.3.6.1.4.1.3955.1000.203.1.7.34 | ScalarapManagementIsatapAutoConfigIPv6GlobalType | read-only | current | Internet address type of apManagementIsatapAutoConfigIPv6Global. |
| 1.3.6.1.4.1.3955.1000.203.1.7.35 | ScalarapManagementIsatapAutoConfigIPv6Global | read-only | current | The Autoconfigured global IPv6 address of ISATAP interface. |
| 1.3.6.1.4.1.3955.1000.203.1.8 | NodeapGlobalRadiusServer | |||
| 1.3.6.1.4.1.3955.1000.203.1.8.1 | ScalarapGlobalRadiusAccMode | read-write | current | Indicates if RADIUS Accounting has been enabled or not. |
| 1.3.6.1.4.1.3955.1000.203.1.8.2 | ScalarapGlobalRadiusIPAddressType | read-write | current | Indicates the IP address type of the global RADIUS server on your network. |
| 1.3.6.1.4.1.3955.1000.203.1.8.3 | ScalarapGlobalRadiusPrimaryServerIPAddress | read-write | current | Indicates the IP address of the Primary RADIUS server on user network that all VAPs use by default. |
| 1.3.6.1.4.1.3955.1000.203.1.8.4 | ScalarapGlobalRadiusBackuponeServerIPAddressType | read-only | current | The Internet address type of apGlobalRadiusBackuponeServerIPAddress. |
| 1.3.6.1.4.1.3955.1000.203.1.8.5 | ScalarapGlobalRadiusBackuponeServerIPAddress | read-write | current | Indicates the IP address of the first backup RADIUS server on user network that all VAPs use by default. |
| 1.3.6.1.4.1.3955.1000.203.1.8.6 | ScalarapGlobalRadiusBackuptwoServerIPAddressType | read-only | current | The Internet address type of apGlobalRadiusBackuptwoServerIPAddress. |
| 1.3.6.1.4.1.3955.1000.203.1.8.7 | ScalarapGlobalRadiusBackuptwoServerIPAddress | read-write | current | Indicates the IP address of the second backup RADIUS server on user network that all VAPs use by default. |
| 1.3.6.1.4.1.3955.1000.203.1.8.8 | ScalarapGlobalRadiusBackupthreeServerIPAddressType | read-only | current | The Internet address type of apGlobalRadiusBackupthreeServerIPAddress. |
| 1.3.6.1.4.1.3955.1000.203.1.8.9 | ScalarapGlobalRadiusBackupthreeServerIPAddress | read-write | current | Indicates the IP address of the third backup RADIUS server on user network that all VAPs use by default. |
| 1.3.6.1.4.1.3955.1000.203.1.8.10 | ScalarapGlobalRadiusPrimaryServerIPv6AddressType | read-only | current | The Internet address type of apGlobalRadiusPrimaryServerIPv6Address. |
| 1.3.6.1.4.1.3955.1000.203.1.8.11 | ScalarapGlobalRadiusPrimaryServerIPv6Address | read-write | current | Indicates the IPv6 address of the Primary RADIUS server on user network that all VAPs use. |
| 1.3.6.1.4.1.3955.1000.203.1.8.12 | ScalarapGlobalRadiusBackuponeServerIPv6AddressType | read-only | current | The Internet address type of apGlobalRadiusBackuponeServerIPv6Address. |
| 1.3.6.1.4.1.3955.1000.203.1.8.13 | ScalarapGlobalRadiusBackuponeServerIPv6Address | read-write | current | Indicates the IPv6 address of the first backup RADIUS server on user network that all VAPs use. |
| 1.3.6.1.4.1.3955.1000.203.1.8.14 | ScalarapGlobalRadiusBackuptwoServerIPv6AddressType | read-only | current | The Internet address type of apGlobalRadiusBackuptwoServerIPv6Address. |
| 1.3.6.1.4.1.3955.1000.203.1.8.15 | ScalarapGlobalRadiusBackuptwoServerIPv6Address | read-write | current | Indicates the IPv6 address of the second backup RADIUS server on user network that all VAPs use. |
| 1.3.6.1.4.1.3955.1000.203.1.8.16 | ScalarapGlobalRadiusBackupthreeServerIPv6AddressType | read-only | current | Internet address type of apGlobalRadiusBackupthreeServerIPv6Address. |
| 1.3.6.1.4.1.3955.1000.203.1.8.17 | ScalarapGlobalRadiusBackupthreeServerIPv6Address | read-write | current | Indicates the IPv6 address of the third backup RADIUS server on user network that all VAPs use. |
| 1.3.6.1.4.1.3955.1000.203.1.8.18 | ScalarapGlobalRadiusPrimaryServerKey | read-write | current | Indicates the shared secret key for the global primary RADIUS server. The text you enter will be displayed as '*' characters to prevent others from seeing the … |
| 1.3.6.1.4.1.3955.1000.203.1.8.19 | ScalarapGlobalRadiusBackuponeServerKey | read-write | current | Indicates the shared secret key for the global first backup RADIUS server. The text you enter will be displayed as '*' characters to prevent others from seeing… |
| 1.3.6.1.4.1.3955.1000.203.1.8.20 | ScalarapGlobalRadiusBackuptwoServerKey | read-write | current | Indicates the shared secret key for the global second backup RADIUS server. The text you enter will be displayed as '*' characters to prevent others from seein… |
| 1.3.6.1.4.1.3955.1000.203.1.8.21 | ScalarapGlobalRadiusBackupthreeServerKey | read-write | current | Indicates the shared secret key for the global third backup RADIUS server. The text you enter will be displayed as '*' characters to prevent others from seeing… |
| 1.3.6.1.4.1.3955.1000.203.1.9 | NodeapStaticIpRoute | |||
| 1.3.6.1.4.1.3955.1000.203.1.9.1 | ScalarapStaticIpRouteDestType | read-only | current | The Internet address type of apStaticIpRouteDest. |
| 1.3.6.1.4.1.3955.1000.203.1.9.2 | ScalarapStaticIpRouteDest | read-write | current | Destination IP of the static route. |
| 1.3.6.1.4.1.3955.1000.203.1.9.3 | ScalarapStaticIpRouteMaskType | read-only | current | The Internet address type of apStaticIpRouteMask. |
| 1.3.6.1.4.1.3955.1000.203.1.9.4 | ScalarapStaticIpRouteMask | read-write | current | Network Mask of the static route. |
| 1.3.6.1.4.1.3955.1000.203.1.9.5 | ScalarapStaticIpRouteGatewayType | read-only | current | The Internet address type of apStaticIpRouteGateway. |
| 1.3.6.1.4.1.3955.1000.203.1.9.6 | ScalarapStaticIpRouteGateway | read-write | current | Nexthop IP of the static route. |
| 1.3.6.1.4.1.3955.1000.203.1.10 | NodeapStaticIPv6Route | |||
| 1.3.6.1.4.1.3955.1000.203.1.10.1 | ScalarapStaticIPv6RouteDestType | read-only | current | The Internet address type of apStaticIPv6RouteDest. |
| 1.3.6.1.4.1.3955.1000.203.1.10.2 | ScalarapStaticIPv6RouteDest | read-write | current | Destination IPv6 of the static route. |
| 1.3.6.1.4.1.3955.1000.203.1.10.3 | ScalarapStaticIPv6PrefixLength | read-write | current | Prefix length of IPv6 route destination. |
| 1.3.6.1.4.1.3955.1000.203.1.10.4 | ScalarapStaticIPv6RouteGatewayType | read-only | current | The Internet address type of apStaticIPv6RouteGateway. |
| 1.3.6.1.4.1.3955.1000.203.1.10.5 | ScalarapStaticIPv6RouteGateway | read-write | current | Nexthop IPv6 of the static route. |
| 1.3.6.1.4.1.3955.1000.203.1.11 | NodeapBridgeConfig | |||
| 1.3.6.1.4.1.3955.1000.203.1.11.1 | ScalarapBridgeConfigStp | read-write | current | Indicates whether the Spanning Tree Protocol(STP) is enabled or disabled. STP is supported only for bridge interfaces. If user tries to set this value for inte… |
| 1.3.6.1.4.1.3955.1000.203.1.11.2 | ScalarapBridgeConfigFd | read-write | current | Interface forwarding delay for bridge interfaces. Only used when STP is enabled. |
| 1.3.6.1.4.1.3955.1000.203.1.11.3 | ScalarapBridgeConfigHello | read-write | current | Indicates hello time for bridge interfaces. Only used when STP is enabled. |
| 1.3.6.1.4.1.3955.1000.203.1.12 | NodeapMacAclModeConfig | |||
| 1.3.6.1.4.1.3955.1000.203.1.12.1 | ScalarapMacAclMode | read-write | current | Mode for the MAC access list. This will be applied to apBssMacAclMode and apWgBridgeDwstrmMacAclMode objects. |
| 1.3.6.1.4.1.3955.1000.203.2 | NodeapCodeDownload | |||
| 1.3.6.1.4.1.3955.1000.203.2.1 | NodeapFileDownload | |||
| 1.3.6.1.4.1.3955.1000.203.2.1.1 | ScalarapFileDownloadAddressType | read-only | current | The type of the IP address as defined in the InetAddress MIB for downloading a file. |
| 1.3.6.1.4.1.3955.1000.203.2.1.2 | ScalarapFileDownloadAddress | read-write | current | IP address of the server where the download file is located. |
| 1.3.6.1.4.1.3955.1000.203.2.1.3 | ScalarapFileDownloadPort | read-write | current | Port on the download server from which to get the file. |
| 1.3.6.1.4.1.3955.1000.203.2.1.4 | ScalarapFileDownloadDirectory | read-write | current | Directory on the server from which to get the download file. The file directory cannot contain the filename. This is the full path to file but not the file its… |
| 1.3.6.1.4.1.3955.1000.203.2.1.5 | ScalarapFileDownloadFilename | read-write | current | File to be downloaded onto the AP from server. Only xml files are allowed to be downloaded. The filename cannot contain the full path to the directory where th… |
| 1.3.6.1.4.1.3955.1000.203.2.1.6 | ScalarapFileDownloadDataType | read-only | current | The file data type to download onto the AP. |
| 1.3.6.1.4.1.3955.1000.203.2.1.7 | ScalarapFileDownloadFileFormat | read-write | current | The format for the file to download onto the AP. |
| 1.3.6.1.4.1.3955.1000.203.2.1.8 | ScalarapFileDownloadProtocol | read-only | current | The protocol used for downloading a file onto the AP. |
| 1.3.6.1.4.1.3955.1000.203.2.1.9 | ScalarapFileDownloadStart | read-write | current | This object initiates the downloading of file onto the AP. |
| 1.3.6.1.4.1.3955.1000.203.2.1.10 | ScalarapFileDownloadTransferStatus | read-only | current | The current status of the file download. |
| 1.3.6.1.4.1.3955.1000.203.2.1.11 | ScalarapFileDownloadValidationStatus | read-only | current | This object detemines the status of the file validation. After the file is successfully downloaded onto an AP, it is validated to make sure it is in the correc… |
| 1.3.6.1.4.1.3955.1000.203.2.2 | NodeapFileUpload | |||
| 1.3.6.1.4.1.3955.1000.203.2.2.1 | ScalarapFileUploadAddressType | read-only | current | The type of the server IP address as defined in the InetAddress MIB for uploading a file. |
| 1.3.6.1.4.1.3955.1000.203.2.2.2 | ScalarapFileUploadAddress | read-write | current | The server IP address for uploading a file. |
| 1.3.6.1.4.1.3955.1000.203.2.2.3 | ScalarapFileUploadPort | read-write | current | The server port for uploading a file. |
| 1.3.6.1.4.1.3955.1000.203.2.2.4 | ScalarapFileUploadDirectory | read-write | current | Directory on the server to place the file in. The file directory cannot contain the filename. This is the full path to file but not the file itself. For exampl… |
| 1.3.6.1.4.1.3955.1000.203.2.2.5 | ScalarapFileUploadFilename | read-write | current | File to be uploaded onto the server. Default filename is 'config.xml'. Only XML files are supported for upgrade. The filename cannot contain the full path to t… |
| 1.3.6.1.4.1.3955.1000.203.2.2.6 | ScalarapFileUploadDataType | read-only | current | The file data type to upload onto the server. |
| 1.3.6.1.4.1.3955.1000.203.2.2.7 | ScalarapFileUploadFileFormat | read-write | current | The file format to upload onto the server. |
| 1.3.6.1.4.1.3955.1000.203.2.2.8 | ScalarapFileUploadProtocol | read-only | current | The protocol used for uploading the file onto a server. |
| 1.3.6.1.4.1.3955.1000.203.2.2.9 | ScalarapFileUploadStart | read-write | current | This object initiates the uploading of file onto a server. |
| 1.3.6.1.4.1.3955.1000.203.2.2.10 | ScalarapFileUploadStatus | read-only | current | The current status of the file upload. |
| 1.3.6.1.4.1.3955.1000.203.2.3 | NodeapFirmwareUpgrade | |||
| 1.3.6.1.4.1.3955.1000.203.2.3.1 | ScalarapFirmwareUpgradeAddressType | read-only | current | The type of the firmware upgrade IP address as defined in the InetAddress MIB for upgrading firmware. |
| 1.3.6.1.4.1.3955.1000.203.2.3.2 | ScalarapFirmwareUpgradeAddress | read-write | current | The IP address of the server where the firmware file is located. |
| 1.3.6.1.4.1.3955.1000.203.2.3.3 | ScalarapFirmwareUpgradePort | read-write | current | Port on the server from which to get the firmware file. |
| 1.3.6.1.4.1.3955.1000.203.2.3.4 | ScalarapFirmwareUpgradeDirectory | read-write | current | Directory on the server from which to get the firmware file. The file directory cannot contain the filename. This is the full path to file but not the file its… |
| 1.3.6.1.4.1.3955.1000.203.2.3.5 | ScalarapFirmwareDownloadImagename | read-write | current | Firmware file name to upgrade the AP with. The filename cannot contain the full path to the directory where the file will be placed. When all the objects are s… |
| 1.3.6.1.4.1.3955.1000.203.2.3.6 | ScalarapFirmwareUpgradeProtocol | read-only | current | The protocol used for upgrading the AP firmware. |
| 1.3.6.1.4.1.3955.1000.203.2.3.7 | ScalarapFirmwareUpgradeStart | read-write | current | This object initiates the upgrading of firmware on the AP. |
| 1.3.6.1.4.1.3955.1000.203.2.3.8 | ScalarapFirmwareImageDownloadStatus | read-only | current | Indicates download status of firmware image on AP. The object that initiates the download part of the firmware upgrade. The image file is to be downloaded onto… |
| 1.3.6.1.4.1.3955.1000.203.2.4 | NodeapFileTransfer | |||
| 1.3.6.1.4.1.3955.1000.203.2.4.1 | ScalarapFileTransferProtocol | read-only | current | The protocol used for transferring a file over the network. |
| 1.3.6.1.4.1.3955.1000.203.2.4.2 | ScalarapFileTransferSrcFileType | read-write | current | Specifies the type of file to copy from. One of apFileTransferSrcFileType or apFileTransferDstFileType must be of type backupConfig, mirrorConfig, runningConfi… |
| 1.3.6.1.4.1.3955.1000.203.2.4.3 | ScalarapFileTransferDstFileType | read-write | current | Specifies the type of file to copy from. One of apFileTransferSrcFileType or apFileTransferDstFileType must be of type backupConfig, mirrorConfig, runningConfi… |
| 1.3.6.1.4.1.3955.1000.203.2.4.4 | ScalarapFileTransferFilename | read-write | current | File to be downloaded onto the AP from server. Only xml files are allowed to be downloaded. The filename cannot contain the full path to the directory where th… |
| 1.3.6.1.4.1.3955.1000.203.2.4.5 | ScalarapFileTransferAddressType | read-only | current | The type of the IP address as defined in the InetAddress MIB for transferring a file. |
| 1.3.6.1.4.1.3955.1000.203.2.4.6 | ScalarapFileTransferAddress | read-write | current | The ip address of the tftp server from (or to) which to copy the configuration file. This object must be created when either the apFileTransferSrcFileType or a… |
| 1.3.6.1.4.1.3955.1000.203.2.4.7 | ScalarapFileTransferPort | read-write | current | The port of the tftp server from (or to) which to copy the configuration file. This object must be created when either the apFileTransferSrcFileType or apFileT… |
| 1.3.6.1.4.1.3955.1000.203.2.4.8 | ScalarapFileTransferDirectory | read-write | current | Directory on the server from which to perform file transfer. The file directory cannot contain the filename. This is the full path to file but not the file its… |
| 1.3.6.1.4.1.3955.1000.203.2.4.9 | ScalarapFileTransferDataType | read-only | current | The file data type to transfer onto the AP. This object must be created when either the apFileTransferSrcFileType or apFileTransferDstFileType has the value ne… |
| 1.3.6.1.4.1.3955.1000.203.2.4.10 | ScalarapFileTransferFileFormat | read-write | current | The format for the file to transfer onto the AP. |
| 1.3.6.1.4.1.3955.1000.203.2.4.11 | ScalarapFileTransferStart | read-write | current | This object initiates the transferring of file onto the AP. This object must be created when either the apFileTransferSrcFileType or apFileTransferDstFileType … |
| 1.3.6.1.4.1.3955.1000.203.2.4.12 | ScalarapFileTransferStatus | read-only | current | The current status of the file transfer. |
| 1.3.6.1.4.1.3955.1000.203.2.4.13 | ScalarapFileTransferValidationStatus | read-only | current | This object detemines the status of the file validation. After the file is successfully transferred onto an AP, it is validated to make sure it is in the corre… |
| 1.3.6.1.4.1.3955.1000.203.3 | NodeapLog | |||
| 1.3.6.1.4.1.3955.1000.203.3.1 | NodeapLogConfig | |||
| 1.3.6.1.4.1.3955.1000.203.3.1.1 | ScalarapLogDepth | read-write | current | Maximum number of log messages that are stored in volatile memory |
| 1.3.6.1.4.1.3955.1000.203.3.1.2 | ScalarapLogPersistence | read-write | current | Flag to indicate whether logs will be written to non-volatile memory. |
| 1.3.6.1.4.1.3955.1000.203.3.1.3 | ScalarapLogSeverity | read-write | current | Severity level of log messages to write to non-volatile memory. |
| 1.3.6.1.4.1.3955.1000.203.3.1.4 | ScalarapLogRelayEnabled | read-write | current | Flag to indicate whether log entries are sent to a syslog server. |
| 1.3.6.1.4.1.3955.1000.203.3.1.5 | ScalarapLogRelayHostType | read-write | current | The Internet address type of apLogRelayHost. The inet address type must be configured before configuring IP address or domain name |
| 1.3.6.1.4.1.3955.1000.203.3.1.6 | ScalarapLogRelayHost | read-write | current | Hostname or IP address of syslog host. The inet address type must be configured before configuring IP address or domain name |
| 1.3.6.1.4.1.3955.1000.203.3.1.7 | ScalarapLogRelayPort | read-write | current | Port number of syslog server on relay host. |
| 1.3.6.1.4.1.3955.1000.203.3.2 | TableapLogTable | not-accessible | current | Log table to display log messages. |
| 1.3.6.1.4.1.3955.1000.203.3.2.1 | RowapLogEntry | not-accessible | current | Entry in log table. |
| 1.3.6.1.4.1.3955.1000.203.3.2.1.1 | ColumnapLogEntryNumber | not-accessible | current | Indicates log entry number in the log table. |
| 1.3.6.1.4.1.3955.1000.203.3.2.1.2 | ColumnapLogEntryPriority | read-only | current | Each log entry can have eight possible priorities. Valid values for priority are debug, info, notice, warning, error, critical, alert, and emergency. |
| 1.3.6.1.4.1.3955.1000.203.3.2.1.3 | ColumnapLogEntryTime | read-only | current | Indicates the time when log error message was generated. |
| 1.3.6.1.4.1.3955.1000.203.3.2.1.4 | ColumnapLogEntryDaemon | read-only | current | Indicates where system log file is located. |
| 1.3.6.1.4.1.3955.1000.203.3.2.1.5 | ColumnapLogEntryMessage | read-only | current | Log message. |
| 1.3.6.1.4.1.3955.1000.203.4 | NodeapVap | |||
| 1.3.6.1.4.1.3955.1000.203.4.1 | TableapVapTable | not-accessible | current | This table display VAP entries. User can configure sixteen Virtual Access Points (VAPs) per radio that simulate multiple APs in one physical access point. |
| 1.3.6.1.4.1.3955.1000.203.4.1.1 | RowapVapEntry | not-accessible | current | Entry in VAP table. |
| 1.3.6.1.4.1.3955.1000.203.4.1.1.1 | ColumnapVapId | not-accessible | current | The Vap index associated with VAP. |
| 1.3.6.1.4.1.3955.1000.203.4.1.1.2 | ColumnapVapRadio | not-accessible | current | The Radio interface index associated with VAP. |
| 1.3.6.1.4.1.3955.1000.203.4.1.1.3 | ColumnapVapStatus | read-write | current | Indicates administrative status of VAP. Set 'up' to enable specified network. If user disables a network, VLAN Id is lost. |
| 1.3.6.1.4.1.3955.1000.203.4.1.1.4 | ColumnapVapVlanID | read-write | current | VLAN Id associated with VAP. |
| 1.3.6.1.4.1.3955.1000.203.4.1.1.5 | ColumnapVapDescription | read-write | current | Human readable description of each VAP. |
| 1.3.6.1.4.1.3955.1000.203.4.1.1.6 | ColumnapVapGlobalRadiusMode | read-only | obsolete | This object is moved to BSS Table and should no longer be used. |
| 1.3.6.1.4.1.3955.1000.203.4.1.1.7 | ColumnapVapRedirectMode | read-write | obsolete | Indicates whether redirect mode is none or http. |
| 1.3.6.1.4.1.3955.1000.203.4.1.1.8 | ColumnapVapRedirectUrl | read-write | obsolete | The configured redirect URL. |
| 1.3.6.1.4.1.3955.1000.203.4.1.1.9 | ColumnapVapQosMode | read-write | current | Indicates whether qos mode is enabled or not. |
| 1.3.6.1.4.1.3955.1000.203.4.1.1.10 | ColumnapVapDefBwMaxUp | read-write | current | Maximum default bandwidth in up direction in bps. |
| 1.3.6.1.4.1.3955.1000.203.4.1.1.11 | ColumnapVapDefBwMaxDown | read-write | current | Maximum default bandwidth in down direction in bps. |
| 1.3.6.1.4.1.3955.1000.203.4.1.1.12 | ColumnapVapAclTypeUp | read-write | current | Indicates the type of ACL in UP direction.This object must be set before setting apVapAclUp object. |
| 1.3.6.1.4.1.3955.1000.203.4.1.1.13 | ColumnapVapAclUp | read-write | current | Human readable name of ACL in UP direction. It should be one of the names in apQosAclName object.apVapAclTypeUp object must be set prior to setting this object. |
| 1.3.6.1.4.1.3955.1000.203.4.1.1.14 | ColumnapVapAclTypeDown | read-write | current | Indicates the type of ACL in DOWN direction. It should be one of the names in apQosAclName object.This object must be set before setting apVapAclDown object. |
| 1.3.6.1.4.1.3955.1000.203.4.1.1.15 | ColumnapVapAclDown | read-write | current | Human readable name of ACL in DOWN direction. It should be one of the names in apQosAclName object.apVapAclTypeDown object must be set prior to setting this ob… |
| 1.3.6.1.4.1.3955.1000.203.4.1.1.16 | ColumnapVapPolicyUp | read-write | current | Human readable name of Diffserv Policy in UP direction. It should be one of the names in apQosDsPolicyMapName object. |
| 1.3.6.1.4.1.3955.1000.203.4.1.1.17 | ColumnapVapPolicyDown | read-write | current | Human readable name of Diffserv Policy in DOWN direction. It should be one of the names in apQosDsPolicyMapName object. |
| 1.3.6.1.4.1.3955.1000.203.4.1.1.18 | ColumnapVapSchedulerProfile | read-write | current | Scheduler profile name that is associated with this vap. This is referenced to the apSchedulerProfileTable. |
| 1.3.6.1.4.1.3955.1000.203.4.1.1.19 | ColumnapVapOperationalStatus | read-only | current | Indicates operational status of VAP. The associated Scheduler profile apVapSchedulerProfile could affect this field. |
| 1.3.6.1.4.1.3955.1000.203.4.1.1.20 | ColumnapVapBandSteerMode | read-write | current | Configure band steering on this VAP. To have band steering operationally enabled, the following conditions should be met: 1. SSIDs on both VAPs should match. 2… |
| 1.3.6.1.4.1.3955.1000.203.5 | NodeapIfConfig | |||
| 1.3.6.1.4.1.3955.1000.203.5.1 | TableapIfConfigTable | not-accessible | current | A list of interface configuration entries. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1 | RowapIfConfigEntry | not-accessible | current | An entry containing configuration information applicable to a particular interface. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.1 | ColumnapIfConfigIndex | not-accessible | current | Indicates index for the IfConfigTable |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.2 | ColumnapIfConfigName | read-only | current | Indicates name of interface. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.3 | ColumnapIfConfigType | read-only | current | Indicates type of interface. Valid values are 'ethernet', 'loopback', 'service-set', 'bridge', 'vlan', and 'wds'. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.4 | ColumnapIfConfigMacAddress | read-only | current | Indicates MAC Address of the interface. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.5 | ColumnapIfConfigStaticIpType | read-only | current | The Internet address type of apIfConfigStaticIp. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.6 | ColumnapIfConfigStaticIp | read-write | current | IP address that will be used when DHCP server is disabled. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.7 | ColumnapIfConfigStaticMaskType | read-only | current | The Internet address type of apIfConfigStaticMask. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.8 | ColumnapIfConfigStaticMask | read-write | current | Netmask that will be used when the DHCP server is disabled. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.9 | ColumnapIfConfigPathcost | read-write | current | Contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of th… |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.10 | ColumnapIfConfigPriority | read-only | current | Interface bridge priority. Only used when STP is enabled. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.11 | ColumnapIfConfigSsid | read-write | current | Indicates the Service Set Id (SSID) associated with this interface. Value can be any string 1 to 32 characters. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.12 | ColumnapIfConfigBss | read-only | current | Indicates the Basic Service Set (BSS) associated with service set interface. Also serves as an index to the corresponding apBssTable entry. Valid value is the … |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.13 | ColumnapIfConfigSecurity | read-write | current | Indicates security to use for service-set interface. Valid values can be 'plainText', 'staticWep', 'dot1x', 'wpaPersonal', and 'wpaEnterprise'. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.14 | ColumnapIfConfigWpaPersonalKey | read-write | current | Pre-shared key for Wireless Protected Access (WPA) personal. Only used when security is wpa-personal. Valid value is an ASCII string between 8 and 63 character… |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.15 | ColumnapIfConfigWepKeyAscii | read-write | current | Indicates whether or not the Wired Equivalent Privacy (WEP) Key is in ASCII or HEX for service-set interfaces. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.16 | ColumnapIfConfigWepKeyLength | read-write | current | Length of the WEP key for service set interfaces. The key length values used by the SNMP do not include the initialization vector in the length. On the web UI,… |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.17 | ColumnapIfConfigWepDefaultKey | read-write | current | Indicates the WEP key index to use when transmitting. Only used when security is static-wep. Valid value is a number between 1 and 4. This field is valid for s… |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.18 | ColumnapIfConfigWepKey1 | read-write | current | Configure WEP key 1 for service-set interfaces. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If K… |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.19 | ColumnapIfConfigWepKey2 | read-write | current | Configure WEP key 2 for service-set interfaces. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If K… |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.20 | ColumnapIfConfigWepKey3 | read-write | current | Configure WEP key 3 for service-set interfaces. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If K… |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.21 | ColumnapIfConfigWepKey4 | read-write | current | Configure WEP key 4 for service set interfaces. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If K… |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.22 | ColumnapIfConfigRadio | read-write | current | Radio associated with the WDS interface. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.23 | ColumnapIfConfigRemoteMac | read-write | current | MAC Address of the remote end of the Wireless Distributed System (WDS) link. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.24 | ColumnapIfConfigWepKey | read-write | current | Configures WEP key for the WDS link. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If Key Length i… |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.25 | ColumnapIfConfigWdsSsid | read-write | current | SSID for the WDS link. Also serves as an index to the apSsidTable. SSID should be in the range 1 to 32 characters. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.26 | ColumnapIfConfigWdsSecPolicy | read-write | current | Indicates which security field to use for WDS interfaces. By default security policy is not configured on WDS interfaces. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.27 | ColumnapIfConfigWdsWpaPskKey | read-write | current | The WDS Wi-Fi Personnal Access(WPA) PSK key. The key is minimum 8 and upto 63 characters long. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.28 | ColumnapIfConfigRxBytes | read-only | current | Indicates received bytes. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.29 | ColumnapIfConfigRxPackets | read-only | current | Indicates received packets. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.30 | ColumnapIfConfigRxErrors | read-only | current | Indicates received packets with errors. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.31 | ColumnapIfConfigTxBytes | read-only | current | Indicates transmitted bytes. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.32 | ColumnapIfConfigTxPackets | read-only | current | Indicates transmitted packets. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.33 | ColumnapIfConfigTxErrors | read-only | current | Indicates transmitted packets with errors. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.34 | ColumnapIfConfigTxDropBytes | read-only | current | Indicates transmitted bytes that were dropped. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.35 | ColumnapIfConfigRxDropBytes | read-only | current | Indicates received bytes that were dropped. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.36 | ColumnapIfConfigTxDropPackets | read-only | current | Indicates transmitted packets that were dropped. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.37 | ColumnapIfConfigRxDropPackets | read-only | current | Indicates received packets that were dropped. |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.38 | ColumnapIfConfigTsVoTxBytes | read-only | current | |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.39 | ColumnapIfConfigTsViTxBytes | read-only | current | |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.40 | ColumnapIfConfigTsVoRxBytes | read-only | current | |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.41 | ColumnapIfConfigTsViRxBytes | read-only | current | |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.42 | ColumnapIfConfigTsVoTxPackets | read-only | current | |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.43 | ColumnapIfConfigTsViTxPackets | read-only | current | |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.44 | ColumnapIfConfigTsVoRxPackets | read-only | current | |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.45 | ColumnapIfConfigTsViRxPackets | read-only | current | |
| 1.3.6.1.4.1.3955.1000.203.5.1.1.46 | ColumnapIfConfigGreenEthMode | read-write | current | Get/Set the Green ethernet mode to (up/down). |
| 1.3.6.1.4.1.3955.1000.203.6 | NodeapRadioBss | |||
| 1.3.6.1.4.1.3955.1000.203.6.1 | TableapRadioTable | not-accessible | current | A list of radio configuration entries. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1 | RowapRadioEntry | not-accessible | current | An entry containing configuration information applicable to a particular radio. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.1 | ColumnapRadioIdentifier | not-accessible | current | Unique Radio Id. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.2 | ColumnapRadioStatus | read-write | current | Administrative status of the radio. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.3 | ColumnapRadioName | read-only | current | Description of the radio. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.4 | ColumnapRadioMac | read-only | current | MAC address for the radio. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.5 | ColumnapRadioMaxBss | read-only | current | Maximum number of BSSes or MAC addresses for this radio. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.6 | ColumnapRadioChannelPolicy | read-write | current | Channel selection policy. Valid values are 'static', 'best'. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.7 | ColumnapRadioMode | read-write | current | Wireless mode for this radio. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.8 | ColumnapRadioDot11h | read-write | current | Indicates whether or not 802.11h is enabled on this radio. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.9 | ColumnapRadioDot11d | read-write | current | Indicates whether or not 802.11d is enabled on the radio. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.10 | ColumnapRadioStaticChannel | read-write | current | Specify static channel for this radio. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.11 | ColumnapRadioChannel | read-only | current | Channel currently in use on this radio. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.12 | ColumnapRadioTxPower | read-write | current | Current transmit power on this radio. Transmit power is specified in percentage. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.13 | ColumnapRadioBeaconInterval | read-write | current | Base beacon interval for this radio. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.14 | ColumnapRadioRtsThreshold | read-write | current | Ready to send (RTS) threshold for this radio. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.15 | ColumnapRadioFragThreshold | read-write | current | Minimum packet size for fragmentation. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.16 | ColumnapRadioApDetection | read-write | current | Whether or not AP detection is enabled. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.17 | ColumnapRadioStationIsolation | read-write | current | Indicates whether stations are isolated from one another. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.18 | ColumnapRadioFrequency | read-only | current | Indicates frequency in use on this radio in MHz. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.19 | ColumnapRadioWme | read-write | current | Indicates whether Wireless Media Extensions (WME) is enabled on this AP. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.20 | ColumnapRadioWmeNoAck | read-write | current | Indicates whether 'No-Acknowledge' option of Wireless Media Extensions (WME) is enabled on this AP. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.21 | ColumnapRadioWmeAPSD | read-write | current | Indicates whether Automatic Power Save Delivery (APSD) option of Wireless Media Extensions (WME) is enabled on this AP. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.22 | ColumnapRadioRateLimitEnable | read-write | current | Indicates whether broadcast/multicast rate limiting is enabled. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.23 | ColumnapRadioRateLimit | read-write | current | Broadcast/multicast rate limit in packets/second. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.24 | ColumnapRadioRateLimitBurst | read-write | current | Rate limit burst, in packets per second. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.25 | ColumnapRadioWlanUtil | read-only | current | Indicates WLAN utilization of the radio. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.26 | ColumnapRadioChannelBandwidth | read-write | current | The channel bandwidth used for 802.11n, 802.11ac modes of operation. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.27 | ColumnapRadioPrimaryChannel | read-write | current | The 'primary channel' used in 802.11n 40-MHz channels. The 'primary channel' is one of the two side-by-side 20-MHz channels which form an 802.11n 40-MHz channe… |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.28 | ColumnapRadioShortGuardIntervalSupported | read-write | current | 802.11n allows support for a 'short guard interval'. The 'guard interval' is an amount of 'dead time' between transmission of symbols. Prior to 802.11n, the in… |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.29 | ColumnapRadioSTBCMode | read-write | current | Space Time Block Coding (STBC) is an 802.11n transmission technique which improves range and reliability for clients having a single antenna. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.30 | ColumnapRadioProtection | read-write | current | Protection is a mechanism defined in later 802.11 standards which allow 'legacy' clients/APs to co-exist with the newer clients/APs without causing interferenc… |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.31 | ColumnapRadioFixedMulticastRate | read-write | current | Specify Fixed Multicast Rate for this radio in Mbps. - For radio modes bg, bgn or nonlyg, valid rates are auto, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54. - … |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.32 | ColumnapRadioDtimPeriod | read-write | current | Delivery Traffic Indication Map (DTIM) period for this Radio. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.33 | ColumnapRadioMaxStations | read-write | current | The maximum number of associations supported. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.34 | ColumnapRadioNumAssociatedStations | read-only | current | Indicates total number of stations associated to this radio. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.35 | ColumnapRadioEdcaTemplate | read-write | current | Enables the administrator to set the WMM queue parameters to predefined values. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.36 | ColumnapRadioSchedulerProfile | read-write | current | Scheduler profile name that is associated with the radio. This is reference to the apSchedulerProfileTable. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.37 | ColumnapRadioOperationalStatus | read-only | current | Indicates operational status of Radio. The associated Scheduler profile apRadioSchedulerProfile could affect this field. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.38 | ColumnapRadioOperationalChannelBandwidth | read-only | current | The operational channel bandwidth. |
| 1.3.6.1.4.1.3955.1000.203.6.1.1.39 | ColumnapRadioOperationalPrimaryChannel | read-only | obsolete | The 'Operational primary channel' used in 802.11n 40-MHz channels. 'not applicable' is shown when it is not 40-MHz channel. The 'primary channel' is one of the… |
| 1.3.6.1.4.1.3955.1000.203.6.2 | TableapBssTable | not-accessible | current | A list of radio configuration entries. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1 | RowapBssEntry | not-accessible | current | An entry containing configuration information applicable to a particular Basic Service Set (BSS) Id. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.1 | ColumnapBssIdentifier | not-accessible | current | Unique Id for this BSS. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.2 | ColumnapBssStatus | read-write | current | Status of this BSS. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.3 | ColumnapBssDescr | read-write | current | Human readable description of this BSS. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.4 | ColumnapBssRadio | read-only | current | Radio associated with this BSS. Can be used to access the apRadioTable. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.5 | ColumnapBssBeaconInterface | read-only | current | Interface used for beacons. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.6 | ColumnapBssMac | read-only | current | MAC address associated with this BSS. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.7 | ColumnapBssDtimPeriod | read-only | obsolete | This object is moved to Radio Table and should no longer be used. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.8 | ColumnapBssMaxStations | read-only | obsolete | This object is moved to Radio Table and should no longer be used. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.9 | ColumnapBssIgnoreBcastSsid | read-write | current | When true, SSIDs are not sent in beacons and probes are ignored. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.10 | ColumnapBssMacAclMode | read-only | current | Mode for the MAC access list. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.11 | ColumnapBssMacAclName | read-only | current | MAC ACL name from the existing list of MAC ACL instances. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.12 | ColumnapBssRadiusAccounting | read-write | current | Indicates whether RADIUS accounting is enabled. User should disable global radius server mode (object apBssGlobalRadiusMode under BSS table) to set the RADIUS … |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.13 | ColumnapBssRadiusIpType | read-write | current | Type of the IP address associated with this BSS. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.14 | ColumnapBssRadiusPrimaryServerIp | read-write | current | Primary RADIUS server IP address associated with this BSS. User should disable global radius server mode (object apBssGlobalRadiusMode under BSS table) to conf… |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.15 | ColumnapBssRadiusBackuponeServerIpType | read-only | current | Type of the IP address associated with this BSS. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.16 | ColumnapBssRadiusBackuponeServerIp | read-write | current | First backup RADIUS server IP address associated with this BSS. User should disable global radius server mode (object apBssGlobalRadiusMode under BSS table) to… |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.17 | ColumnapBssRadiusBackuptwoServerIpType | read-only | current | Type of the IP address associated with this BSS. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.18 | ColumnapBssRadiusBackuptwoServerIp | read-write | current | Second backup RADIUS server IP address associated with this BSS. User should disable global radius server mode (object apBssGlobalRadiusMode under BSS table) t… |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.19 | ColumnapBssRadiusBackupthreeServerIpType | read-only | current | Type of the IP address associated with this BSS. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.20 | ColumnapBssRadiusBackupthreeServerIp | read-write | current | Third backup RADIUS server IP address associated with this BSS. User should disable global radius server mode (object apBssGlobalRadiusMode under BSS table) to… |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.21 | ColumnapBssRadiusPrimaryServerIPv6Type | read-only | current | The Internet address type of apBssRadiusPrimaryServerIPv6. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.22 | ColumnapBssRadiusPrimaryServerIPv6 | read-write | current | Primary RADIUS IPv6 address associated with this BSS. User should disable global radius server mode (object apBssGlobalRadiusMode under BSS table) to configure… |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.23 | ColumnapBssRadiusBackuponeServerIPv6Type | read-only | current | The Internet address type of apBssRadiusBackuponeServerIPv6. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.24 | ColumnapBssRadiusBackuponeServerIPv6 | read-write | current | First backup RADIUS IPv6 address associated with this BSS. User should disable global radius server mode (object apBssGlobalRadiusMode under BSS table) to conf… |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.25 | ColumnapBssRadiusBackuptwoServerIPv6Type | read-only | current | The Internet address type of apBssRadiusBackuptwoServerIPv6. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.26 | ColumnapBssRadiusBackuptwoServerIPv6 | read-write | current | Second backup RADIUS IPv6 address associated with this BSS. User should disable global radius server mode (object apBssGlobalRadiusMode under BSS table) to con… |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.27 | ColumnapBssRadiusBackupthreeServerIPv6Type | read-only | current | Internet address type of apBssRadiusBackupthreeServerIPv6. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.28 | ColumnapBssRadiusBackupthreeServerIPv6 | read-write | current | Third backup RADIUS IPv6 address associated with this BSS. User should disable global radius server mode (object apBssGlobalRadiusMode under BSS table) to conf… |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.29 | ColumnapBssRadiusCurrentServer | read-write | current | Current RADIUS server is the radius server currently in use. User can configure this value as primary, backupone, backuptwo or backupthree. This parameter is n… |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.30 | ColumnapBssRadiusPrimaryServerKey | read-write | current | Key for communicating with Primary RADIUS server. User should disable global radius server mode (object apBssGlobalRadiusMode under BSS table) to configure RAD… |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.31 | ColumnapBssRadiusBackuponeServerKey | read-write | current | Key for communicating with first backup RADIUS server. User should disable global radius server mode (object apBssGlobalRadiusMode under BSS table) to configur… |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.32 | ColumnapBssRadiusBackuptwoServerKey | read-write | current | Key for communicating with second backup RADIUS server. User should disable global radius server mode (object apBssGlobalRadiusMode under BSS table) to configu… |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.33 | ColumnapBssRadiusBackupthreeServerKey | read-write | current | Key for communicating with third backup RADIUS server. User should disable global radius server mode (object apBssGlobalRadiusMode under BSS table) to configur… |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.34 | ColumnapBssOpenSystemAuth | read-write | current | Indicates whether Open System authentication is permitted. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.35 | ColumnapBssSharedKeyAuth | read-write | current | Indicates whether Shared Key authentication is permitted. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.36 | ColumnapBssWpaCipherTkip | read-write | current | Indicates whether Temporal Key Integral Protocol (TKIP) is permitted as a WPA cipher. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.37 | ColumnapBssWpaCipherCcmp | read-write | current | Indicates whether CCMP is permitted as a WPA cipher. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.38 | ColumnapBssWpaAllowed | read-write | current | Indicates whether WPA is allowed. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.39 | ColumnapBssWpa2Allowed | read-write | current | Indicates whether WPA2 is allowed. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.40 | ColumnapBssRsnPreauth | read-write | current | Indicates whether Robust Secure Network (RSN) preauthentication is allowed. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.41 | ColumnapBssBroadcastKeyRefreshRate | read-write | current | Specifies the interval after which the broadcast keys are changed. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.42 | ColumnapBssSessionKeyRefreshRate | read-write | current | Session key refresh rate.The valid range is 30-86400.A value of 0 indicates session key refresh is disabled |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.43 | ColumnapBssGlobalRadiusMode | read-write | current | Indicates whether global radius server settings are used. |
| 1.3.6.1.4.1.3955.1000.203.6.2.1.44 | ColumnapBssMacAclAuthType | read-write | current | Type to disable, enable and specify a lookup method, for authentication via client MAC address. Supported types are disable, local, radius |
| 1.3.6.1.4.1.3955.1000.203.6.3 | TableapEDCAAPTable | not-accessible | current | This table contains the Enhanced Distributed Channel Access (EDCA) parameters. 'AP' EDCA parameters affect downstream traffic from the AP to the client station. |
| 1.3.6.1.4.1.3955.1000.203.6.3.1 | RowapEDCAAPEntry | not-accessible | current | Contains the 'AP' Enhanced Distributed Channel Access (EDCA) parameters for one radio. |
| 1.3.6.1.4.1.3955.1000.203.6.3.1.1 | ColumnapEDCAAPRadioId | not-accessible | current | Unique Radio ID. |
| 1.3.6.1.4.1.3955.1000.203.6.3.1.2 | ColumnapEDCAAPQueueId | read-only | current | ID for this queue. |
| 1.3.6.1.4.1.3955.1000.203.6.3.1.3 | ColumnapEDCAAPAIFS | read-write | current | Specifies the wait time for data frames in msec. |
| 1.3.6.1.4.1.3955.1000.203.6.3.1.4 | ColumnapEDCAAPMinContentionWindow | read-write | current | Specifies the lower limit of a range from which the initial random backoff wait time is determined. |
| 1.3.6.1.4.1.3955.1000.203.6.3.1.5 | ColumnapEDCAAPMaxContentionWindow | read-write | current | Specifies the upper limit of a range from which the initial random backoff wait time is determined. |
| 1.3.6.1.4.1.3955.1000.203.6.3.1.6 | ColumnapEDCAAPMaxBurst | read-write | current | Specifies the maximum burst length (as either an integer or floating point value) allowed for packet bursts on the wireless network. |
| 1.3.6.1.4.1.3955.1000.203.6.4 | TableapEDCAStationTable | not-accessible | current | This table contains the Enhanced Distributed Channel Access (EDCA) parameters. 'Station' EDCA parameters affect upstream traffic from the client station to an … |
| 1.3.6.1.4.1.3955.1000.203.6.4.1 | RowapEDCAStationEntry | not-accessible | current | Contains the Station Enhanced Distributed Channel Access (EDCA) parameters for one radio. |
| 1.3.6.1.4.1.3955.1000.203.6.4.1.1 | ColumnapEDCAStationRadioId | not-accessible | current | Unique Radio ID. |
| 1.3.6.1.4.1.3955.1000.203.6.4.1.2 | ColumnapEDCAStationQueueId | read-only | current | ID for this queue. |
| 1.3.6.1.4.1.3955.1000.203.6.4.1.3 | ColumnapEDCAStationAIFS | read-write | current | Specifies the wait time for data frames in msec. |
| 1.3.6.1.4.1.3955.1000.203.6.4.1.4 | ColumnapEDCAStationMinContentionWindow | read-write | current | Specifies the lower limit of a range from which the initial random backoff wait time is determined. |
| 1.3.6.1.4.1.3955.1000.203.6.4.1.5 | ColumnapEDCAStationMaxContentionWindow | read-write | current | Specifies the upper limit of a range from which the initial random backoff wait time is determined. |
| 1.3.6.1.4.1.3955.1000.203.6.4.1.6 | ColumnapEDCAStationTxOpLimit | read-write | current | Specifies an interval of the time when a Wireless Multimedia Extensions(WME) client station has the right to initiate transmissions on to the wireless medium. |
| 1.3.6.1.4.1.3955.1000.203.7 | NodeapAssociation | |||
| 1.3.6.1.4.1.3955.1000.203.7.1 | TableapAssocTable | not-accessible | current | A list of associated Clients on this AP. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1 | RowapAssociationEntry | not-accessible | current | An entry containing the information applicable to an Associated Client. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.1 | ColumnapAssocStationMac | not-accessible | current | MAC address of the station associated with this AP. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.2 | ColumnapAssocInterface | read-only | current | Radio Interface Name on which the client is associated. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.3 | ColumnapAssocAuthenticated | read-only | current | Indicates whether the Client is authenticated with the AP. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.4 | ColumnapAssocAssociated | read-only | current | Indicates whether the Client is associated with the AP. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.5 | ColumnapAssocRxPackets | read-only | current | Count of packets received by this associated station. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.6 | ColumnapAssocTxPackets | read-only | current | Count of packets transmitted by this associated station. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.7 | ColumnapAssocRxBytes | read-only | current | Count of bytes received by this associated station. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.8 | ColumnapAssocTxBytes | read-only | current | Count of bytes transmitted by this associated station. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.9 | ColumnapAssocListenInterval | read-only | current | Listen Interval. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.10 | ColumnapAssocLastRssi | read-only | current | Received Signal Strength Indicator of last frame. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.11 | ColumnapAssocTxDropBytes | read-only | current | Count of bytes transmitted by this associated station that were dropped. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.12 | ColumnapAssocRxDropBytes | read-only | current | Count of bytes received by this associated station that were dropped. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.13 | ColumnapAssocTxDropPackets | read-only | current | Count of packets transmitted by this associated station that were dropped. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.14 | ColumnapAssocRxDropPackets | read-only | current | Count of packets received by this associated station that were dropped. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.15 | ColumnapAssocClntQoSStatus | read-only | current | Client QOS Status. Enabled if both, global QOS mode and QOS mode of the VAP, to which the client is associated are enabled. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.16 | ColumnapAssocBwLimitUp | read-only | current | Maximum allowed transmission rate in bits per second (bps) to the client in client to AP direction. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.17 | ColumnapAssocBwLimitDown | read-only | current | Maximum allowed transmission rate in bits per second (bps) to the client in AP to client direction. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.18 | ColumnapAssocACLTypeUp | read-only | current | Type of acl applied to the selected client in client to AP direction. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.19 | ColumnapAssocACLUp | read-only | current | Name of acl applied to the selected client in client to AP direction. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.20 | ColumnapAssocACLTypeDown | read-only | current | Type of acl applied to the selected client in AP to client direction. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.21 | ColumnapAssocACLDown | read-only | current | Name of acl applied to the selected client in AP to client direction. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.22 | ColumnapAssocPolicyUp | read-only | current | Diffserv policy applied to the selected client in client to AP direction. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.23 | ColumnapAssocPolicyDown | read-only | current | Diffserv policy applied to the selected client in AP to client direction. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.24 | ColumnapAssocTsViolateTxPackets | read-only | current | Count of TS violate packets transmitted by this associated Station. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.25 | ColumnapAssocTsViolateRxPackets | read-only | current | Count of TS violate packets received by this associated Station. |
| 1.3.6.1.4.1.3955.1000.203.7.1.1.26 | ColumnapAssocUptime | read-only | current | The time duration for which this station is associated with the AP. |
| 1.3.6.1.4.1.3955.1000.203.8 | NodeapDetectedAp | |||
| 1.3.6.1.4.1.3955.1000.203.8.1 | TableapDetectedApTable | not-accessible | current | A list of detected AP entries. |
| 1.3.6.1.4.1.3955.1000.203.8.1.1 | RowapDetectedApEntry | not-accessible | current | An entry containing the information applicable to a detected Access Point. |
| 1.3.6.1.4.1.3955.1000.203.8.1.1.1 | ColumnapDetectedApMac | not-accessible | current | MAC address of the detected neighbor APs. |
| 1.3.6.1.4.1.3955.1000.203.8.1.1.2 | ColumnapDetectedRadioName | not-accessible | current | Radio used to scan the detected SSID. |
| 1.3.6.1.4.1.3955.1000.203.8.1.1.3 | ColumnapDetectedApBeaconInterval | read-only | current | Beacon Interval for the detected AP in terms of TU. TU is measurement of time equal to 1024 micro seconds. |
| 1.3.6.1.4.1.3955.1000.203.8.1.1.4 | ColumnapDetectedApCapability | read-only | current | The capability of the detected AP, represented as a hexadecimal bitflag. The bit definitions are: 0x0001 - AP 0x0002 - Ad-Hoc 0x0010 - Privacy 0x0020 - Short p… |
| 1.3.6.1.4.1.3955.1000.203.8.1.1.5 | ColumnapDetectedApType | read-only | current | The type of device detected. Values can be AP, Ad hoc, or Other. |
| 1.3.6.1.4.1.3955.1000.203.8.1.1.6 | ColumnapDetectedApPrivacy | read-only | current | Indicates whether privacy (WEP or WPA) is enabled. |
| 1.3.6.1.4.1.3955.1000.203.8.1.1.7 | ColumnapDetectedApSsid | read-only | current | SSID of the AP. |
| 1.3.6.1.4.1.3955.1000.203.8.1.1.8 | ColumnapDetectedApWpa | read-only | current | Whether WPA is enabled on the scanned SSID. |
| 1.3.6.1.4.1.3955.1000.203.8.1.1.9 | ColumnapDetectedApPhyType | read-only | current | Mode the radio was in when the AP was detected. Note that in B or G mode, it is possible to detect both B and G APs, therefore the distinction between B and G … |
| 1.3.6.1.4.1.3955.1000.203.8.1.1.10 | ColumnapDetectedApBand | read-only | current | The RF band the AP was detected in. Values can be 2.4, 5, or 5 Turbo. |
| 1.3.6.1.4.1.3955.1000.203.8.1.1.11 | ColumnapDetectedApChannel | read-only | current | Channel on which the AP is detected. |
| 1.3.6.1.4.1.3955.1000.203.8.1.1.12 | ColumnapDetectedApRate | read-only | current | The basic rate at which the AP sends beacons. |
| 1.3.6.1.4.1.3955.1000.203.8.1.1.13 | ColumnapDetectedApSignal | read-only | current | Signal Strength of the AP. |
| 1.3.6.1.4.1.3955.1000.203.8.1.1.14 | ColumnapDetectedApErp | read-only | current | The Extended PHY Rate (ERP) of the detected AP, represented as a hexadecimal number. The bit definitions are: 0x01 - Non ERP (802.11b) STAs are present in the … |
| 1.3.6.1.4.1.3955.1000.203.8.1.1.15 | ColumnapDetectedApBeacons | read-only | current | Counter of Beacons received from this AP. |
| 1.3.6.1.4.1.3955.1000.203.8.1.1.16 | ColumnapDetectedApLastBeacon | read-only | current | Time of last beacon received. |
| 1.3.6.1.4.1.3955.1000.203.8.1.1.17 | ColumnapDetectedApSupportedRates | read-only | current | Supported rates of the detected AP. |
| 1.3.6.1.4.1.3955.1000.203.8.2 | NodeapDetectedRogueApTrap | |||
| 1.3.6.1.4.1.3955.1000.203.8.2.0 | NodeapDetectedRogueApTrapPrefix | |||
| 1.3.6.1.4.1.3955.1000.203.8.2.0.1 | NotificationapDetectedRogueApTrapNotification | current | Object which contains information about the Detected Rogue AP. | |
| 1.3.6.1.4.1.3955.1000.203.8.2.1 | NodeapDetectedRogueApTrapObjects | |||
| 1.3.6.1.4.1.3955.1000.203.8.2.1.1 | ScalarapDetectedRogueApTrapSeverity | accessible-for-notify | current | This string contains the severity of trap message. |
| 1.3.6.1.4.1.3955.1000.203.8.2.1.2 | ScalarapDetectedRogueApTrapTrapMessage | accessible-for-notify | current | This string contains the contents of trap message. |
| 1.3.6.1.4.1.3955.1000.203.8.2.1.3 | ScalarapDetectedRogueApTrapMacAddress | accessible-for-notify | current | This string contains the AP MAC address. |
| 1.3.6.1.4.1.3955.1000.203.8.2.1.4 | ScalarapDetectedRogueApTrapSsid | accessible-for-notify | current | This string contains the SSID. |
| 1.3.6.1.4.1.3955.1000.203.8.2.1.5 | ScalarapDetectedRogueApTrapChannal | accessible-for-notify | current | This string contains the Channel. |
| 1.3.6.1.4.1.3955.1000.203.9 | NodeapRadioRates | |||
| 1.3.6.1.4.1.3955.1000.203.9.1 | TableapRadioBasicRateTable | not-accessible | current | A list of basic rates. |
| 1.3.6.1.4.1.3955.1000.203.9.1.1 | RowapRadioBasicRateEntry | not-accessible | current | An entry containing information applicable to basic rates of a particular radio. |
| 1.3.6.1.4.1.3955.1000.203.9.1.1.1 | ColumnapBasicRateRadioName | not-accessible | current | AP radio to which the basic rate applies. |
| 1.3.6.1.4.1.3955.1000.203.9.1.1.2 | ColumnapRadioBasicRate | not-accessible | current | Basic rate value. |
| 1.3.6.1.4.1.3955.1000.203.9.1.1.3 | ColumnapRadioBasicRateStatus | read-create | current | Status of an entry. Supported values are: - active (1) - createAndGo (4) - createAndWait (5) - destroy (6) The administrator can only use createAndGo, createAn… |
| 1.3.6.1.4.1.3955.1000.203.9.2 | TableapRadioSuppRateTable | not-accessible | current | A list of radio supported rates. |
| 1.3.6.1.4.1.3955.1000.203.9.2.1 | RowapRadioSuppRateEntry | not-accessible | current | An entry containing information applicable to supported rates of a particular radio. |
| 1.3.6.1.4.1.3955.1000.203.9.2.1.1 | ColumnapSuppRateRadioName | not-accessible | current | AP radio to which the supported rate applies. |
| 1.3.6.1.4.1.3955.1000.203.9.2.1.2 | ColumnapRadioSuppRate | not-accessible | current | Supported rate value. |
| 1.3.6.1.4.1.3955.1000.203.9.2.1.3 | ColumnapRadioSuppRateStatus | read-create | current | Status of an entry. Supported values are: - active (1) - createAndGo (4) - createAndWait (5) - destroy (6) The administrator can only use createAndGo, createAn… |
| 1.3.6.1.4.1.3955.1000.203.9.3 | TableapRadioMcsIndexTable | not-accessible | obsolete | A list of radio supported MCS Indicies. |
| 1.3.6.1.4.1.3955.1000.203.9.3.1 | RowapRadioMcsIndexEntry | not-accessible | obsolete | An entry containing information applicable to MCS Index of a particular radio. |
| 1.3.6.1.4.1.3955.1000.203.9.3.1.1 | ColumnapMcsIndexRadioName | not-accessible | obsolete | AP radio to which the MCS Index applies. |
| 1.3.6.1.4.1.3955.1000.203.9.3.1.2 | ColumnapRadioMcsIndex | not-accessible | obsolete | Supported index. |
| 1.3.6.1.4.1.3955.1000.203.9.3.1.3 | ColumnapRadioMcsIndexStatus | read-only | obsolete | Status of an entry. Supported values are: - active (1) - createAndGo (4) - createAndWait (5) - destroy (6) The administrator can only use createAndGo, createAn… |
| 1.3.6.1.4.1.3955.1000.203.10 | NodeapQos | |||
| 1.3.6.1.4.1.3955.1000.203.10.1 | ScalarapQosGlobalMode | read-write | current | Configure Client QoS Global Admin Mode. |
| 1.3.6.1.4.1.3955.1000.203.10.2 | TableapQosAclTable | not-accessible | current | A table of ACL instances. |
| 1.3.6.1.4.1.3955.1000.203.10.2.1 | RowapQosAclEntry | not-accessible | current | An ACL instance entry. |
| 1.3.6.1.4.1.3955.1000.203.10.2.1.1 | ColumnapQosAclType | not-accessible | current | The type of this IP ACL entry. |
| 1.3.6.1.4.1.3955.1000.203.10.2.1.2 | ColumnapQosAclName | not-accessible | current | The name of this IP ACL entry, which must consist of 1 to 31 alphanumeric characters and uniquely identify this IP ACL. |
| 1.3.6.1.4.1.3955.1000.203.10.2.1.3 | ColumnapQosAclStatus | read-create | current | Status of an entry. Supported values are: - active (1) - createAndGo (4) - destroy (6) The administrator can only use createAndGo and destroy. After creating a… |
| 1.3.6.1.4.1.3955.1000.203.10.3 | TableapQosAclRuleTable | not-accessible | current | A table of IP ACL Rule instances. |
| 1.3.6.1.4.1.3955.1000.203.10.3.1 | RowapQosAclRuleEntry | not-accessible | current | An IP ACL Rule instance entry. |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.1 | ColumnapQosAclRuleIndex | not-accessible | current | The index of this rule instance within an IP ACL. |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.2 | ColumnapQosAclRuleStatus | read-create | current | Status of an entry. Supported values are: - active (1) - createAndGo (4) The administrator can only use createAndGo and createAndWait. After creating an entry,… |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.3 | ColumnapQosAclRuleMatchEvery | read-create | current | Flag to indicate that the ACL rule is defined to match on every IP packet, regardless of content. If set to true(1), all other classification field objects in … |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.4 | ColumnapQosAclRuleAction | read-create | current | The type of action this rule should perform. |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.5 | ColumnapQosAclRuleProtocol | read-create | current | icmp - 1 igmp - 2 ip - 4 tcp - 6 udp - 17 All values from 1 to 255 are valid. |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.6 | ColumnapQosAclRuleSrcIpAddress | read-create | current | The Source IPV4 Address used in the ACL Classification. |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.7 | ColumnapQosAclRuleSrcIpMask | read-create | current | The Source IPV4 Mask used in the ACL Classification. This mask is expressed using wild-card notation, which is the ones' complement of traditional Subnet Masks… |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.8 | ColumnapQosAclRuleSrcL4Port | read-create | current | The Source Port (Layer 4) used in ACL classification. The following are defined: ftpdata-20, ftp-21, telnet-23, smtp-25, tftp-69, http/www-80, snmp-161.All val… |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.9 | ColumnapQosAclRuleDstIpAddress | read-create | current | The Destination IPV4 Address used in the ACL Classification. |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.10 | ColumnapQosAclRuleDstIpMask | read-create | current | The Destination IPV4 Mask used in the ACL Classification. This mask is expressed using wild-card notation, which is the ones' complement of traditional Subnet … |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.11 | ColumnapQosAclRuleDstL4Port | read-create | current | The Destination Port (Layer 4) used in ACL classification. The following are defined: ftpdata-20, ftp-21, telnet-23, smtp-25, domain-53, tftp-69, http/www-80, … |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.12 | ColumnapQosAclRuleIpTosBits | read-create | current | The Type of Service (TOS) Bits value. By definition, the high-order three bits represent the IP precedence value, whereas alternatively the high-order six bits… |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.13 | ColumnapQosAclRuleIpTosMask | read-create | current | The Type of Service (TOS) Mask value. By definition, the high-order three bits represent the IP precedence value, whereas alternatively the high-order six bits… |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.14 | ColumnapQosAclRuleIpDscp | read-create | current | IP DiffServ Code Point (DSCP) match value for the ACL rule. The DSCP is defined as the high-order six bits of the Service Type octet in the IPv4 header. |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.15 | ColumnapQosAclRuleIpPrecedence | read-create | current | IP Precedence match value for the ACL rule. The Precedence bits are defined as the high-order three bits of the Service Type octed in the IPv4 header. |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.16 | ColumnapQosAclRuleSrcIpv6Address | read-create | current | The Source IPV6 Address used in the ACL Classification. |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.17 | ColumnapQosAclRuleSrcIpv6Prefix | read-create | current | Source IPv6 Prefix Len. |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.18 | ColumnapQosAclRuleDstIpv6Address | read-create | current | The Destination IPV6 Address used in the ACL Classification. |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.19 | ColumnapQosAclRuleDstIpv6Prefix | read-create | current | Destination IPv6 Prefix Len. |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.20 | ColumnapQosAclRuleIpv6FlowLabel | read-create | current | The IPv6 Flow Label match value for the class. Hex values in the range of 00000 - FFFFF. |
| 1.3.6.1.4.1.3955.1000.203.10.3.1.21 | ColumnapQosAclRuleCommit | read-create | current | Flag to indicate that to apply all the rule attributes created for this row entry. This can be set only once. Once committed, the rule properties cannot be cha… |
| 1.3.6.1.4.1.3955.1000.203.10.4 | TableapQosDsClassMapTable | not-accessible | current | A table of class-map instances. |
| 1.3.6.1.4.1.3955.1000.203.10.4.1 | RowapQosDsClassMapEntry | not-accessible | current | A class-map instance entry. |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.1 | ColumnapQosDsClassMapName | not-accessible | current | Name of this class-map entry, which must consist of 1 to 31 alphanumeric characters and uniquely identify this class-map. |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.2 | ColumnapQosDsClassMapMatchL3Protocol | not-accessible | current | The Layer3 protocol match value used for the class. This will be the type of this class-map. |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.3 | ColumnapQosDsClassMapStatus | read-create | current | Status of an entry. Supported values are: - active (1) - createAndGo (4) - destroy (6) The administrator can only use createAndGo, createAndWait, and destroy. … |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.4 | ColumnapQosDsClassMapMatchEvery | read-create | current | Flag to indicate that match attribute is defined to match on every IP packet, regardless of content. If set to true(1), all other classification field objects … |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.5 | ColumnapQosDsClassMapMatchDstMac | read-create | current | Destination MAC address match value for the class. |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.6 | ColumnapQosDsClassMapMatchDstMacMask | read-create | current | Destination MAC address mask match value for the class. |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.7 | ColumnapQosDsClassMapMatchDstIpAddress | read-create | current | The Destination IP Address match value for the class. |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.8 | ColumnapQosDsClassMapMatchDstIpMask | read-create | current | Destination IP address mask match value for the class. This mask value identifies the portion of apQosDsClassMapMatchDstIpAddress that is compared against a pa… |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.9 | ColumnapQosDsClassMapMatchDstL4Port | read-create | current | Destination Port (Layer 4) used in class-map classification. Different port numbers are: ftpdata-20, ftp-21, telnet-23, smtp-25, domain-53, tftp-69, http/www-8… |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.10 | ColumnapQosDsClassMapMatchCos | read-create | current | Three-bit user priority field in the 802.1Q tag header of a tagged Ethernet frame used as a class-match parameter. |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.11 | ColumnapQosDsClassMapMatchEthertype | read-create | current | The Ethertype match value for the class. Hex values in the range of 0x0600-0xFFFF. Different ethertype key values are appletalk(0x02), arp(0x03), ibmsna(0x04),… |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.12 | ColumnapQosDsClassMapMatchIpTosBits | read-create | current | The Type of Service (TOS) Bits value. By definition, the high-order three bits represent the IP precedence value, whereas alternatively the high-order six bits… |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.13 | ColumnapQosDsClassMapMatchIpTosMask | read-create | current | The Type of Service (TOS) Mask value. By definition, the high-order three bits represent the IP precedence value, whereas alternatively the high-order six bits… |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.14 | ColumnapQosDsClassMapMatchIpDscp | read-create | current | IP DiffServ Code Point (DSCP) match value for the class. The DSCP is defined as the high-order six bits of the Service Type octet in the IPv4 header. |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.15 | ColumnapQosDsClassMapMatchIpPrecedence | read-create | current | IP Precedence match value for the class. The Precedence bits are defined as the high-order three bits of the Service Type octed in the IPv4 header. |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.16 | ColumnapQosDsClassMapMatchProtocol | read-create | current | icmp - 1 igmp - 2 tcp - 6 udp - 17 All values from 1 to 255 are valid. |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.17 | ColumnapQosDsClassMapMatchSrcMac | read-create | current | Source MAC address match value for the class. |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.18 | ColumnapQosDsClassMapMatchSrcMacMask | read-create | current | Source MAC address mask match value for the class. This mask value identifies the portion of apQosDsClassMapMatchSrcMac that is compared against a packet. A no… |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.19 | ColumnapQosDsClassMapMatchSrcIpAddress | read-create | current | The Source IP Address match value for the class. |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.20 | ColumnapQosDsClassMapMatchSrcIpMask | read-create | current | Source IP address mask match value for the class. This mask value identifies the portion of apQosDsClassMapMatchSrcIpAddress that is compared against a packet.… |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.21 | ColumnapQosDsClassMapMatchSrcL4Port | read-create | current | Source Port (Layer 4) used in class-map classification. Different port numbers are: ftpdata-20, ftp-21, telnet-23, smtp-25, domain-53, tftp-69, http/www-80, sn… |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.22 | ColumnapQosDsClassMapMatchVlanId | read-create | current | Flag to indicate that class map is defined to match Vlan ID. |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.23 | ColumnapQosDsClassMapMatchFlags | read-only | current | Four byte to indicate the fields set for cos, ethertype, ip-tos, ip-dscp, ip-precedence. Each bit cos (1), ethertype (2), ip-tos (4), ip-dscp (8), ip-precedenc… |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.24 | ColumnapQosDsClassMapMatchSrcIpv6Address | read-create | current | The Source IPv6 Address match value for the class. |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.25 | ColumnapQosDsClassMapMatchSrcIpv6Prefix | read-create | current | The Source IPv6 Prefix length match value for the class. |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.26 | ColumnapQosDsClassMapMatchDstIpv6Address | read-create | current | The Destination IPv6 Address match value for the class. |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.27 | ColumnapQosDsClassMapMatchDstIpv6Prefix | read-create | current | Destination IPv6 Prefix length match value for the class. |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.28 | ColumnapQosDsClassMapMatchIpv6FlowLabel | read-create | current | The IPv6 Flow Label match value for the class. Hex values in the range of 00000 - FFFFF. |
| 1.3.6.1.4.1.3955.1000.203.10.4.1.29 | ColumnapQosDsClassMapMatchCommit | read-create | current | Flag to indicate that to apply all the class-map match attributes created for this row entry. This can be set only once. A value of 1 indicates commit operatio… |
| 1.3.6.1.4.1.3955.1000.203.10.5 | TableapQosDsPolicyMapTable | not-accessible | current | A table of policy-map instances. |
| 1.3.6.1.4.1.3955.1000.203.10.5.1 | RowapQosDsPolicyMapEntry | not-accessible | current | A policy-map instance entry. |
| 1.3.6.1.4.1.3955.1000.203.10.5.1.1 | ColumnapQosDsPolicyMapName | not-accessible | current | Name of this policy-map entry, which must consist of 1 to 31 alphanumeric characters and uniquely identify this class-map. |
| 1.3.6.1.4.1.3955.1000.203.10.5.1.2 | ColumnapQosDsPolicyMapStatus | read-create | current | Status of an entry. Supported values are: - active (1) - createAndGo (4) The administrator can only use createAndGo, createAndWait, and destroy. After creating… |
| 1.3.6.1.4.1.3955.1000.203.10.6 | TableapQosDsPolicyMapAttrTable | not-accessible | current | A table of policy-map match attribute instances. |
| 1.3.6.1.4.1.3955.1000.203.10.6.1 | RowapQosDsPolicyMapAttrEntry | not-accessible | current | A policy-map match attribute instance entry. |
| 1.3.6.1.4.1.3955.1000.203.10.6.1.1 | ColumnapQosDsPolicyMapAttrIndex | not-accessible | current | Index of this match attribute instance within Diffserv. |
| 1.3.6.1.4.1.3955.1000.203.10.6.1.2 | ColumnapQosDsPolicyMapAttrPoliceSimple | not-accessible | current | Flag to indicate if police simple is turned on. |
| 1.3.6.1.4.1.3955.1000.203.10.6.1.3 | ColumnapQosDsPolicyMapAttrStatus | read-create | current | Status of an entry. Supported values are: - active (1) - createAndGo (4) - destroy (6) The administrator can only use createAndGo, createAndWait, and destroy. … |
| 1.3.6.1.4.1.3955.1000.203.10.6.1.4 | ColumnapQosDsPolicyMapAttrPolicyActionType | read-only | current | Policy map match entry type. It determines which one of the individual match conditions is defined for the present policy map attribute.If not set, error is re… |
| 1.3.6.1.4.1.3955.1000.203.10.6.1.5 | ColumnapQosDsPolicyMapAttrDrop | read-create | current | Flag to indicate that all packets belonging to this class-instance are dropped. If set, no other action attribute needs to be configured. |
| 1.3.6.1.4.1.3955.1000.203.10.6.1.6 | ColumnapQosDsPolicyMapAttrSend | read-create | current | Flag to indicate that all packets belonging to this class-instance are forwarded. If set, no other action attribute needs to be configured. |
| 1.3.6.1.4.1.3955.1000.203.10.6.1.7 | ColumnapQosDsPolicyMapAttrMarkCos | read-create | current | Three-bit user priority field value in the 802.1Q tag header of a tagged Ethernet frame, marked as part of the policy for a class instance. If set, no other ac… |
| 1.3.6.1.4.1.3955.1000.203.10.6.1.8 | ColumnapQosDsPolicyMapAttrMarkIpDscp | read-create | current | Specified IP DSCP value to mark in all packets belonging to the class-instance. If set, no other action attribute needs to be configured. |
| 1.3.6.1.4.1.3955.1000.203.10.6.1.9 | ColumnapQosDsPolicyMapAttrMarkIpPrecedence | read-create | current | Specified IP Precedence value to mark in all packets belonging to the class-instance. If set, no other action attribute needs to be configured. |
| 1.3.6.1.4.1.3955.1000.203.10.6.1.10 | ColumnapQosDsPolicyMapAttrPoliceSimpleRate | read-create | current | Policy Attribute Rate configured in kbps. It is used when police simple is turned on. This property is set only when the property 'apQosDsPolicyMapAttrPoliceSi… |
| 1.3.6.1.4.1.3955.1000.203.10.6.1.11 | ColumnapQosDsPolicyMapAttrPoliceSimpleBurstSize | read-create | current | Policy Attribute Burst Size in bytes. It is used when police simple is turned on. This property is set only when the property 'apQosDsPolicyMapAttrPoliceSimple… |
| 1.3.6.1.4.1.3955.1000.203.10.6.1.12 | ColumnapQosDsPolicyMapAttrCommit | read-create | current | Flag to indicate that to apply all the policy attributes created for this row entry. This can be set only once. Once the attributes are committed they cannot b… |
| 1.3.6.1.4.1.3955.1000.203.10.7 | TableapQosMacAclTable | not-accessible | current | A table of MAC-ACL instances. |
| 1.3.6.1.4.1.3955.1000.203.10.7.1 | RowapQosMacAclEntry | not-accessible | current | A MAC-ACL instance entry. |
| 1.3.6.1.4.1.3955.1000.203.10.7.1.1 | ColumnapQosMacAclName | not-accessible | current | Name of this MAC ACL entry, which must consist of 1 to 31 alphanumeric characters and uniquely identify this MAC ACL. This object must be set to complete a new… |
| 1.3.6.1.4.1.3955.1000.203.10.7.1.2 | ColumnapQosMacAclStatus | read-create | current | Status of an entry. Supported values are: - active (1) - createAndGo (4) - destroy (6) The administrator can only use createAndGo, createAndWait, and destroy. … |
| 1.3.6.1.4.1.3955.1000.203.10.8 | TableapQosMacRuleTable | not-accessible | current | A table of MAC-ACL rule instances. |
| 1.3.6.1.4.1.3955.1000.203.10.8.1 | RowapQosMacRuleEntry | not-accessible | current | A MAC-ACL rule instance entry. |
| 1.3.6.1.4.1.3955.1000.203.10.8.1.1 | ColumnapQosMacAclRuleIndex | not-accessible | current | Index of this rule instance within a MAC ACL. |
| 1.3.6.1.4.1.3955.1000.203.10.8.1.2 | ColumnapQosMacAclRuleStatus | read-create | current | Status of an entry. Supported values are: - active (1) - createAndGo (4) The administrator can only use createAndGo and createAndWait. After creating an entry,… |
| 1.3.6.1.4.1.3955.1000.203.10.8.1.3 | ColumnapQosMacAclRuleAction | read-create | current | The type of action this rule should perform. |
| 1.3.6.1.4.1.3955.1000.203.10.8.1.4 | ColumnapQosMacAclRuleMatchEvery | read-create | current | Flag to indicate that the match attribute is defined to match on packet, regardless of content. If set to true(1), all other classification field objects in th… |
| 1.3.6.1.4.1.3955.1000.203.10.8.1.5 | ColumnapQosMacAclRuleMatchDstMac | read-create | current | Destination MAC address match value for the Rule. |
| 1.3.6.1.4.1.3955.1000.203.10.8.1.6 | ColumnapQosMacAclRuleMatchDstMacMask | read-create | current | Destination MAC address mask match value for the Rule. |
| 1.3.6.1.4.1.3955.1000.203.10.8.1.7 | ColumnapQosMacAclRuleMatchCos | read-create | current | Three-bit user priority field in the 802.1Q tag header of a tagged Ethernet frame used as a rule-match parameter. |
| 1.3.6.1.4.1.3955.1000.203.10.8.1.8 | ColumnapQosMacAclRuleMatchEthertype | read-create | current | The Ethertype match value for the class. Hex values in the range of 0x0600-0xFFFF. Different ethertype key values are appletalk(0x02), arp(0x03), ibmsna(0x04),… |
| 1.3.6.1.4.1.3955.1000.203.10.8.1.9 | ColumnapQosMacAclRuleMatchSrcMac | read-create | current | Source MAC address match value for the rule. |
| 1.3.6.1.4.1.3955.1000.203.10.8.1.10 | ColumnapQosMacAclRuleMatchSrcMacMask | read-create | current | Source MAC address mask match value for the rule. This mask value identifies the portion of apQosMacAclRuleMatchSrcMac that is compared against a packet. A non… |
| 1.3.6.1.4.1.3955.1000.203.10.8.1.11 | ColumnapQosMacAclRuleMatchVlanId | read-create | current | Flag to indicate that the rule is defined to match Vlan ID. |
| 1.3.6.1.4.1.3955.1000.203.10.8.1.12 | ColumnapQosMacAclRuleMatchCommit | read-create | current | Flag to indicate that to apply all the rule match attributes created for this row entry. This can be set only once. Once committed, the rule properties cannot … |
| 1.3.6.1.4.1.3955.1000.203.11 | NodewlanAPConformance | |||
| 1.3.6.1.4.1.3955.1000.203.11.1 | NodewlanAPMIBCompliance | |||
| 1.3.6.1.4.1.3955.1000.203.11.1.2 | CompliancewlanAPMIBCompliance2 | current | The compliance statement for the AP. | |
| 1.3.6.1.4.1.3955.1000.203.11.2 | NodewlanAPMIBGroup | |||
| 1.3.6.1.4.1.3955.1000.203.11.2.1 | GroupwlanAPSysGroup | current | The group of objects for basic management of the AP. | |
| 1.3.6.1.4.1.3955.1000.203.11.2.2 | GroupwlanAPGlobalGroup | current | The group of objects for Global Parameters of the AP. | |
| 1.3.6.1.4.1.3955.1000.203.11.2.3 | GroupwlanAPLogEntryGroup | current | The group of objects for Log Entries of the AP. | |
| 1.3.6.1.4.1.3955.1000.203.11.2.4 | GroupwlanAPVAPEntryGroup | current | The group of objects for VAP Entries of the AP. | |
| 1.3.6.1.4.1.3955.1000.203.11.2.5 | GroupwlanAPInterfaceEntryGroup | current | The group of objects for Interface Entries of the AP. | |
| 1.3.6.1.4.1.3955.1000.203.11.2.6 | GroupwlanAPRadioEntryGroup | current | The group of objects for Radio Entries of the AP. | |
| 1.3.6.1.4.1.3955.1000.203.11.2.7 | GroupwlanAPBssEntryGroup | current | The group of objects for BSS Entries of the AP. | |
| 1.3.6.1.4.1.3955.1000.203.11.2.8 | GroupwlanAPAssociationEntryGroup | current | The group of objects for Association Entries of the AP. | |
| 1.3.6.1.4.1.3955.1000.203.11.2.9 | GroupwlanAPDetectionEntryGroup | current | The group of objects for AP Detection Entries of the AP. | |
| 1.3.6.1.4.1.3955.1000.203.11.2.10 | GroupwlanAPBasicRateEntryGroup | current | The group of objects for basic Rate Entries of the AP. | |
| 1.3.6.1.4.1.3955.1000.203.11.2.11 | GroupwlanAPSupportedEntriesEntryGroup | current | The group of objects for supported rate Entries of the AP. | |
| 1.3.6.1.4.1.3955.1000.203.12 | NodeapTspecTables | |||
| 1.3.6.1.4.1.3955.1000.203.12.1 | TableapTspecAcmTable | not-accessible | current | TSPEC Admission Control Mandatory (ACM) configuration parameters. |
| 1.3.6.1.4.1.3955.1000.203.12.1.1 | RowapTspecAcmEntry | not-accessible | current | TSPEC Admission Control Mandatory (ACM) configuration parameters (per radio). |
| 1.3.6.1.4.1.3955.1000.203.12.1.1.1 | ColumnapTspecRadioName | not-accessible | current | AP radio name. |
| 1.3.6.1.4.1.3955.1000.203.12.1.1.2 | ColumnapTspecStatus | read-create | current | Status of the entry. Only values active (1), createAndGo (4), createAndWait (5) and destroy (6) are supported. The Administrator can only use createAndGo, crea… |
| 1.3.6.1.4.1.3955.1000.203.12.1.1.3 | ColumnapTspecMode | read-write | current | Overall TSPEC operational mode for the designated apTspecRadioName. This object must be set to on(1) for any of the other TSPEC ACM configuration parameters to… |
| 1.3.6.1.4.1.3955.1000.203.12.1.1.4 | ColumnapTspecVoiceAcmMode | read-write | current | Regulates mandatory admission control for the voice access category (AC). When set to on(1), the voice AC may only be used by WMM-compliant client stations tha… |
| 1.3.6.1.4.1.3955.1000.203.12.1.1.5 | ColumnapTspecVoiceAcmLimit | read-write | current | Defines the maximum amount of wireless bandwidth utilization to admit for the voice access category. TSPEC requests that would cause this limit to be exceeded … |
| 1.3.6.1.4.1.3955.1000.203.12.1.1.6 | ColumnapTspecVideoAcmMode | read-write | current | Regulates mandatory admission control for the video access category (AC). When set to on(1), the voice AC may only be used by WMM-compliant client stations tha… |
| 1.3.6.1.4.1.3955.1000.203.12.1.1.7 | ColumnapTspecVideoAcmLimit | read-write | current | Defines the maximum amount of wireless bandwidth utilization to admit for the video access category. TSPEC requests that would cause this limit to be exceeded … |
| 1.3.6.1.4.1.3955.1000.203.12.1.1.8 | ColumnapTspecApInactivityTimeout | read-write | current | Specifies the amount of time that an active traffic stream (TS) in the downlink direction may be idle, from the perspective of the AP, before it is deleted by … |
| 1.3.6.1.4.1.3955.1000.203.12.1.1.9 | ColumnapTspecStaInactivityTimeout | read-write | current | Specifies the amount of time that an active traffic stream (TS) in the uplink direction may be idle, from the perspective of the AP, before it is deleted by th… |
| 1.3.6.1.4.1.3955.1000.203.12.1.1.10 | ColumnapTspecLegacyWmmQMapMode | read-write | current | When set to on(1), the AP allows intermixing of legacy traffic with Wi-Fi Multimedia (WMM) traffic on access category queues that are operating according to ad… |
| 1.3.6.1.4.1.3955.1000.203.12.2 | NodeapTspec | |||
| 1.3.6.1.4.1.3955.1000.203.12.2.1 | ScalarapTspecVoAccept | read-only | current | Total number of voice TSPECs accepted by this AP. |
| 1.3.6.1.4.1.3955.1000.203.12.2.2 | ScalarapTspecVoReject | read-only | current | Total number of voice TSPECs rejected by this AP. |
| 1.3.6.1.4.1.3955.1000.203.12.2.3 | ScalarapTspecViAccept | read-only | current | Total number of video TSPECs accepted by this AP. |
| 1.3.6.1.4.1.3955.1000.203.12.2.4 | ScalarapTspecViReject | read-only | current | Total number of video TSPECs rejected by this AP. |
| 1.3.6.1.4.1.3955.1000.203.12.3 | TableapTspecAcmRadioTable | not-accessible | current | TSPEC Admission Control Mandatory (ACM) status per radio. |
| 1.3.6.1.4.1.3955.1000.203.12.3.1 | RowapTspecAcmRadioEntry | not-accessible | current | An entry for TSPEC Admission Control Mandatory (ACM) status per radio. |
| 1.3.6.1.4.1.3955.1000.203.12.3.1.1 | ColumnapTspecAcmRadioName | not-accessible | current | AP radio name. |
| 1.3.6.1.4.1.3955.1000.203.12.3.1.2 | ColumnapTspecAC | not-accessible | current | AP TSPEC access category (AC). |
| 1.3.6.1.4.1.3955.1000.203.12.3.1.3 | ColumnapTspecOperStatus | read-only | current | TSPEC operational status per access category. |
| 1.3.6.1.4.1.3955.1000.203.12.3.1.4 | ColumnapTspecActiveTS | read-only | current | Number of active traffic streams (TSs). |
| 1.3.6.1.4.1.3955.1000.203.12.3.1.5 | ColumnapTspecActiveClients | read-only | current | Number of active clients with at least one traffic stream on this radio. |
| 1.3.6.1.4.1.3955.1000.203.12.3.1.6 | ColumnapTspecMediumTimeAdmitted | read-only | current | Sum of all medium times currently admitted for this access category. |
| 1.3.6.1.4.1.3955.1000.203.12.3.1.7 | ColumnapTspecMediumTimeUnalloc | read-only | current | Amount of configured medium time that is not allocated for this access category. |
| 1.3.6.1.4.1.3955.1000.203.12.3.1.8 | ColumnapTspecTxBytes | read-only | current | Total bytes transmitted for this access category. |
| 1.3.6.1.4.1.3955.1000.203.12.3.1.9 | ColumnapTspecTxPackets | read-only | current | Total packets transmitted for this access category. |
| 1.3.6.1.4.1.3955.1000.203.12.3.1.10 | ColumnapTspecRxBytes | read-only | current | Total bytes received for this access category. |
| 1.3.6.1.4.1.3955.1000.203.12.3.1.11 | ColumnapTspecRxPackets | read-only | current | Total packets received for this access category. |
| 1.3.6.1.4.1.3955.1000.203.12.4 | TableapTspecAcmVapTable | not-accessible | current | TSPEC Admission Control Mandatory (ACM) status per VAP. |
| 1.3.6.1.4.1.3955.1000.203.12.4.1 | RowapTspecAcmVapEntry | not-accessible | current | An entry for TSPEC Admission Control Mandatory (ACM) status per VAP. |
| 1.3.6.1.4.1.3955.1000.203.12.4.1.1 | ColumnapTspecVapRadioName | not-accessible | current | AP radio name. |
| 1.3.6.1.4.1.3955.1000.203.12.4.1.2 | ColumnapTspecVap | not-accessible | current | Virtual AP name. |
| 1.3.6.1.4.1.3955.1000.203.12.4.1.3 | ColumnapTspecVapAC | not-accessible | current | AP TSPEC access category (AC). |
| 1.3.6.1.4.1.3955.1000.203.12.4.1.4 | ColumnapTspecVapOperStatus | read-only | current | TSPEC operational status per access category. |
| 1.3.6.1.4.1.3955.1000.203.12.4.1.5 | ColumnapTspecVapActiveTS | read-only | current | Number of active traffic streams (TSs). |
| 1.3.6.1.4.1.3955.1000.203.12.4.1.6 | ColumnapTspecVapActiveClients | read-only | current | Number of active clients with at least one traffic stream on this VAP. |
| 1.3.6.1.4.1.3955.1000.203.12.4.1.7 | ColumnapTspecVapMediumTimeAdmitted | read-only | current | Sum of all medium times currently admitted for this access category. |
| 1.3.6.1.4.1.3955.1000.203.12.4.1.8 | ColumnapTspecVapMediumTimeUnalloc | read-only | current | Amount of configured medium time that is not allocated for this access category. |
| 1.3.6.1.4.1.3955.1000.203.12.5 | NodeapTspecConfig | |||
| 1.3.6.1.4.1.3955.1000.203.12.5.1 | ScalarapTspecViolationInterval | read-write | current | Specifies the time period at which wireless clients detected as using admission-controlled resources without proper TSPEC authorization are reported via the sy… |
| 1.3.6.1.4.1.3955.1000.203.12.6 | NodeapTspecClient | |||
| 1.3.6.1.4.1.3955.1000.203.12.6.1 | TableapAssocClientTspecStatusTable | not-accessible | current | This table contains TSPEC traffic stream status parameters for clients currently associated with this AP. Only clients possessing one or more active traffic st… |
| 1.3.6.1.4.1.3955.1000.203.12.6.1.1 | RowapAssocClientTspecStatusEntry | not-accessible | current | Each entry in this table contains TSPEC traffic stream status parameters for a specific client that is currently associated with this AP. |
| 1.3.6.1.4.1.3955.1000.203.12.6.1.1.1 | ColumnapAssocClientTspecStationMac | not-accessible | current | MAC address of the station associated with this traffic stream. |
| 1.3.6.1.4.1.3955.1000.203.12.6.1.1.2 | ColumnapAssocClientTspecTID | not-accessible | current | The traffic stream identifier (TID) indicated in the TSPEC that defines the traffic stream for the specified access category for the wireless client. Each traf… |
| 1.3.6.1.4.1.3955.1000.203.12.6.1.1.3 | ColumnapAssocClientTspecClientMac | read-only | current | MAC address of the client station associated with this traffic stream. This is the same as apAssocClientTspecStationMac but is included in this row for display… |
| 1.3.6.1.4.1.3955.1000.203.12.6.1.1.4 | ColumnapAssocClientTspecACIndex | read-only | current | TSPEC Access Category value (voice or video) for this client session. |
| 1.3.6.1.4.1.3955.1000.203.12.6.1.1.5 | ColumnapAssocClientTspecDirection | read-only | current | The direction of the client traffic stream (TS) as indicated in the TSPEC. An uplink(1) TS monitors data traffic flowing from client station to AP, while a dow… |
| 1.3.6.1.4.1.3955.1000.203.12.6.1.1.6 | ColumnapAssocClientTspecUserPriority | read-only | current | The user priority indicated in the TSPEC that defines the traffic stream for the specified access category for the wireless client. QoS Data frames to/from the… |
| 1.3.6.1.4.1.3955.1000.203.12.6.1.1.7 | ColumnapAssocClientTspecMediumTime | read-only | current | Indicates the amount of time this client is allowed to access the wireless medium each second for the specified access category through this traffic stream. Th… |
| 1.3.6.1.4.1.3955.1000.203.12.6.1.1.8 | ColumnapAssocClientTspecExcessUsageEvents | read-only | current | The number of times the wireless client has appreciably exceeded the medium time established for its TSPEC. The actual measure of 'appreciably exceeded' is imp… |
| 1.3.6.1.4.1.3955.1000.203.12.6.1.1.9 | ColumnapAssocClientTspecInterface | read-only | current | Radio interface name on which the client is associated. |
| 1.3.6.1.4.1.3955.1000.203.12.6.1.1.10 | ColumnapAssocClientTspecBSSID | read-only | current | MAC address of the Virtual AP associated with this TSPEC. |
| 1.3.6.1.4.1.3955.1000.203.12.6.1.1.11 | ColumnapAssocClientTspecSSID | read-only | current | SSID for the TSPEC client. |
| 1.3.6.1.4.1.3955.1000.203.12.6.2 | TableapAssocClientTspecStatisticsTable | not-accessible | current | This table contains TSPEC traffic stream statistics for clients currently associated with this AP. Only clients possessing one or more active traffic streams a… |
| 1.3.6.1.4.1.3955.1000.203.12.6.2.1 | RowapAssocClientTspecStatisticsEntry | not-accessible | current | Each entry in this table contains TSPEC traffic stream statistics for a specific client that is currently associated with this AP. |
| 1.3.6.1.4.1.3955.1000.203.12.6.2.1.1 | ColumnapAssocClientTspecPktsRecvd | read-only | current | Total packets received from the client station for the traffic stream belonging to the specified access category. This object is only valid when the apAssociat… |
| 1.3.6.1.4.1.3955.1000.203.12.6.2.1.2 | ColumnapAssocClientTspecPktsTransmitted | read-only | current | Total packets transmitted to the client station for the traffic stream belonging to the specified access category. This object is only valid when the apAssocia… |
| 1.3.6.1.4.1.3955.1000.203.12.6.2.1.3 | ColumnapAssocClientTspecBytesRecvd | read-only | current | Total bytes received from the client station for the traffic stream belonging to the specified access category. This object is only valid when the apAssociated… |
| 1.3.6.1.4.1.3955.1000.203.12.6.2.1.4 | ColumnapAssocClientTspecBytesTransmitted | read-only | current | Total bytes transmitted to the client station for the traffic stream belonging to the specified access category. This object is only valid when the apAssociate… |
| 1.3.6.1.4.1.3955.1000.203.12.7 | NodeapTspecTrap | |||
| 1.3.6.1.4.1.3955.1000.203.12.7.0 | NodeapTspecTrapPrefix | |||
| 1.3.6.1.4.1.3955.1000.203.12.7.0.1 | NotificationapTspecTrapNotification | current | Object which contains information about the TSPEC client. | |
| 1.3.6.1.4.1.3955.1000.203.12.7.1 | NodeapTspecTrapObjects | |||
| 1.3.6.1.4.1.3955.1000.203.12.7.1.1 | ScalarapTspecTrapSeverity | accessible-for-notify | current | This string contains severity of trap message. |
| 1.3.6.1.4.1.3955.1000.203.12.7.1.2 | ScalarapTspecTrapMessage | accessible-for-notify | current | This string contains contents of trap message. |
| 1.3.6.1.4.1.3955.1000.203.12.7.1.3 | ScalarapTspecTrapMacAddress | accessible-for-notify | current | This string contains the client MAC address. |
| 1.3.6.1.4.1.3955.1000.203.12.7.1.4 | ScalarapTspecTrapAccessCategory | accessible-for-notify | current | This string contains the Access-Category(Voice/Video) of the TS. |
| 1.3.6.1.4.1.3955.1000.203.12.7.1.5 | ScalarapTspecTrapDirection | accessible-for-notify | current | This string contains the direction of the TS |
| 1.3.6.1.4.1.3955.1000.203.12.7.1.6 | ScalarapTspecTrapMediumTime | accessible-for-notify | current | This string contains the medium time of the TS. |
| 1.3.6.1.4.1.3955.1000.203.12.7.1.7 | ScalarapTspecTrapTid | accessible-for-notify | current | This string contains the tid of the TS. |
| 1.3.6.1.4.1.3955.1000.203.12.8 | NodeapTspecUnAuthTrafficTrap | |||
| 1.3.6.1.4.1.3955.1000.203.12.8.0 | NodeapTspecUnAuthTrafficTrapPrefix | |||
| 1.3.6.1.4.1.3955.1000.203.12.8.0.1 | NotificationapTspecUnAuthTrafficTrapNotification | current | Object which contains information about the TSPEC client. | |
| 1.3.6.1.4.1.3955.1000.203.12.8.1 | NodeapTspecUnAuthTrafficTrapObjects | |||
| 1.3.6.1.4.1.3955.1000.203.12.8.1.1 | ScalarapTspecUnAuthTrafficTrapSeverity | accessible-for-notify | current | This string contains severity of trap message. |
| 1.3.6.1.4.1.3955.1000.203.12.8.1.2 | ScalarapTspecUnAuthTrafficTrapMessage | accessible-for-notify | current | This string contains contents of trap message. |
| 1.3.6.1.4.1.3955.1000.203.12.8.1.3 | ScalarapTspecUnAuthTrafficTrapMacAddress | accessible-for-notify | current | This string contains the client MAC address. |
| 1.3.6.1.4.1.3955.1000.203.12.8.1.4 | ScalarapTspecUnAuthTrafficTrapAccessCategory | accessible-for-notify | current | This string contains the Access-Category(Voice/Video) of the TS. |
| 1.3.6.1.4.1.3955.1000.203.13 | NodeapPacketCapture | |||
| 1.3.6.1.4.1.3955.1000.203.13.1 | NodeapPacketCaptureStatusInfo | |||
| 1.3.6.1.4.1.3955.1000.203.13.1.1 | ScalarapPacketCaptureStatus | read-only | current | Current packet capture status. States are Not Started File Capture In Progress Remote Capture In Progress Stopped due to Timeout Stopped due to File Size Stopp… |
| 1.3.6.1.4.1.3955.1000.203.13.1.2 | ScalarapPacketCaptureTime | read-only | current | Elapsed time since packet capture started. |
| 1.3.6.1.4.1.3955.1000.203.13.1.3 | ScalarapPacketCaptureFileSize | read-only | current | Current packet capture file size (valid for file capture only). |
| 1.3.6.1.4.1.3955.1000.203.13.1.4 | ScalarapPacketCaptureDownloadStatus | read-only | current | Packet capture file download status. |
| 1.3.6.1.4.1.3955.1000.203.13.1.5 | ScalarapPacketCaptureAdminStop | read-write | current | This is an action object.Setting this object to stop will stop file or remote packet capture.Read on this object will always return none. |
| 1.3.6.1.4.1.3955.1000.203.13.2 | NodeapPacketCaptureConfig | |||
| 1.3.6.1.4.1.3955.1000.203.13.2.1 | ScalarapPktCaptureCfgBeaconCapture | read-write | current | When packets are captured on radio1 or radio2 interface, beacon frames are also captured. |
| 1.3.6.1.4.1.3955.1000.203.13.2.2 | ScalarapPktCaptureCfgPromiscuousMode | read-write | current | When packets are captured on radio1 or radio2 interface and promiscuous mode is enabled, the radio is changed to promiscuous mode. When capture stops, the prom… |
| 1.3.6.1.4.1.3955.1000.203.13.2.3 | ScalarapPktCaptureCfgClientFilterMode | read-write | current | Flag indicating whether or not WLAN client filter is enabled. |
| 1.3.6.1.4.1.3955.1000.203.13.2.4 | ScalarapPktCaptureCfgClientFilterMacAddr | read-write | current | MAC address of the client for which to capture data on the 802.11 interface. |
| 1.3.6.1.4.1.3955.1000.203.13.3 | NodeapPacketCaptureFile | |||
| 1.3.6.1.4.1.3955.1000.203.13.3.1 | ScalarapPktCaptureInterface | read-write | current | The interface name on which to capture packets when using file capture mode. |
| 1.3.6.1.4.1.3955.1000.203.13.3.2 | ScalarapPktCaptureTFTPServerIpType | read-only | current | The IP address type (IPv4 or IPv6) of the TFTP server. |
| 1.3.6.1.4.1.3955.1000.203.13.3.3 | ScalarapPktCaptureTFTPServer | read-write | current | The IPv4 or IPv6 address of the TFTP server to which the capture file is downloaded. |
| 1.3.6.1.4.1.3955.1000.203.13.3.4 | ScalarapPktCaptureTFTPFilename | read-write | current | The file name on the TFTP server to which the capture file is downloaded. The file name includes the path. |
| 1.3.6.1.4.1.3955.1000.203.13.3.5 | ScalarapPacketCaptureFileDownloadAdminStart | read-write | current | Capture file download administrative start command.This is an action object. Setting this object to start begins packet capture file download to the target and… |
| 1.3.6.1.4.1.3955.1000.203.13.3.6 | ScalarapPktCaptureDuration | read-write | current | The number of seconds for which to capture packets into a file. Range is from 10 to 3600 with a default value of 60. The capture is stopped once the time limit… |
| 1.3.6.1.4.1.3955.1000.203.13.3.7 | ScalarapPktCaptureMaxFileSize | read-write | current | The maximum capture file size. Range is from 64 to 4096 KB (kilobytes) with a default value of 1024 (1MB). The capture is stopped once the maximum file size is… |
| 1.3.6.1.4.1.3955.1000.203.13.3.8 | ScalarapPacketCaptureFileAdminStart | read-write | current | File packet capture administrative start command.This is an action object. Setting this object to start begins file packet capture.Read on this object will alw… |
| 1.3.6.1.4.1.3955.1000.203.13.4 | NodeapPacketCaptureRemote | |||
| 1.3.6.1.4.1.3955.1000.203.13.4.1 | ScalarapPktCaptureRemotePort | read-write | current | The lowest numbered IP port used for communicating with a remote monitoring device. The system uses up to five consecutive port numbers starting with the confi… |
| 1.3.6.1.4.1.3955.1000.203.13.4.2 | ScalarapPacketCaptureRemoteAdminStart | read-write | current | Remote packet capture administrative start command.This is an action object. Setting this object to start begins remote packet capture.Read on this object will… |
| 1.3.6.1.4.1.3955.1000.203.14 | NodeapAeroScoutConfig | |||
| 1.3.6.1.4.1.3955.1000.203.14.1 | ScalarapAeroScoutMode | read-write | current | Indicates if AeroScout(tm) Engine protocol support mode is currently configured. |
| 1.3.6.1.4.1.3955.1000.203.15 | NodeapDateTime | |||
| 1.3.6.1.4.1.3955.1000.203.15.1 | ScalarapSystemDateTime | read-write | current | System Date Month.Date.Year/Hour:Minute |
| 1.3.6.1.4.1.3955.1000.203.15.2 | TableapSystemTimeZoneTable | not-accessible | current | This table represents the time zone list. |
| 1.3.6.1.4.1.3955.1000.203.15.2.1 | RowapSystemTimeZoneEntry | not-accessible | current | Each entry in this table represents a supported time zone. |
| 1.3.6.1.4.1.3955.1000.203.15.2.1.1 | ColumnapSystemTimeZoneIndex | not-accessible | current | Time Zone index. |
| 1.3.6.1.4.1.3955.1000.203.15.2.1.2 | ColumnapSystemTimeZoneList | read-only | current | Time Zone List. |
| 1.3.6.1.4.1.3955.1000.203.15.3 | ScalarapSystemTimeZone | read-write | current | Current System Time Zone. |
| 1.3.6.1.4.1.3955.1000.203.15.4 | ScalarapSystemTimeDSTMode | read-write | current | Daylight Time Saving(DST) Mode. |
| 1.3.6.1.4.1.3955.1000.203.15.5 | ScalarapSystemTimeDSTStart | read-write | current | DST Start Month.Week.Day/Hour:Minute |
| 1.3.6.1.4.1.3955.1000.203.15.6 | ScalarapSystemTimeDSTEnd | read-write | current | DST End Month.Week.Day/Hour:Minute |
| 1.3.6.1.4.1.3955.1000.203.15.7 | ScalarapSystemTimeDSTOffset | read-write | current | Current System Time Zone. |
| 1.3.6.1.4.1.3955.1000.203.16 | NodeapEmailAlert | |||
| 1.3.6.1.4.1.3955.1000.203.16.1 | NodeapEmailAlertConfig | |||
| 1.3.6.1.4.1.3955.1000.203.16.1.1 | ScalarapEmailAlertMode | read-write | current | To enable or disable email alerts feature. |
| 1.3.6.1.4.1.3955.1000.203.16.1.2 | ScalarapEmailAlertLogSeverity | read-write | current | The severity level of log messages that are buffered and sent as email to the configured SMTP server. |
| 1.3.6.1.4.1.3955.1000.203.16.1.3 | ScalarapEmailAlertUrgentSeverity | read-write | current | Th severity level for the log messages that are emailed immediately to the configured SMPT server. |
| 1.3.6.1.4.1.3955.1000.203.16.1.4 | ScalarapEmailAlertFromAddr | read-write | current | Email Alert will send a email with this address as the from address. |
| 1.3.6.1.4.1.3955.1000.203.16.1.5 | ScalarapEmailAlertLogDuration | read-write | current | This duration in minutes determines how frequently the buffered log messages are sent to the SMTP server. |
| 1.3.6.1.4.1.3955.1000.203.16.1.6 | ScalarapEmailAlertSubject | read-write | current | The subject of the email that is sent by the email alert feature. |
| 1.3.6.1.4.1.3955.1000.203.16.1.7 | ScalarapEmailAlertToAddr1 | read-write | current | The first To address is the destination email address of the emails. |
| 1.3.6.1.4.1.3955.1000.203.16.1.8 | ScalarapEmailAlertToAddr2 | read-write | current | The second To address is the destination email address of the emails. |
| 1.3.6.1.4.1.3955.1000.203.16.1.9 | ScalarapEmailAlertToAddr3 | read-write | current | The third To address is the destination email address of the emails. |
| 1.3.6.1.4.1.3955.1000.203.16.1.10 | ScalarapEmailAlertServerAddress | read-write | current | The server address is of SMTP Server to send the email alert. |
| 1.3.6.1.4.1.3955.1000.203.16.1.11 | ScalarapEmailAlertServerAddressType | read-only | current | Indicates the type of address being used for the SMTP server. Only IPv4 addresses and hostnames are allowed. |
| 1.3.6.1.4.1.3955.1000.203.16.1.12 | ScalarapEmailAlertServerSecurity | read-write | current | The security option to be used to send Email alert messages. |
| 1.3.6.1.4.1.3955.1000.203.16.1.13 | ScalarapEmailAlertServerPort | read-write | current | The server port of SMTP Server port. |
| 1.3.6.1.4.1.3955.1000.203.16.1.14 | ScalarapEmailAlertUserName | read-write | current | The username used to authenitcate with SMTP seerver when authentication is TLSv1. The maximum length is 64 characters. |
| 1.3.6.1.4.1.3955.1000.203.16.1.15 | ScalarapEmailAlertPassword | read-write | current | This password used to authenticated with the SMTP server. The maximum length is 64 characters. |
| 1.3.6.1.4.1.3955.1000.203.16.1.16 | ScalarapEmailAlertTestMail | write-only | current | Setting Test mail to enable triggers sending a test mail with the configured SMTP server settings. |
| 1.3.6.1.4.1.3955.1000.203.16.2 | NodeapEmailAlertStatus | |||
| 1.3.6.1.4.1.3955.1000.203.16.2.1 | ScalarapEmailAlertOperStatus | read-only | current | The operational status of the email alert feature. |
| 1.3.6.1.4.1.3955.1000.203.16.2.2 | ScalarapEmailAlertFailedEmailCount | read-only | current | The number of emails messages failed to be sent |
| 1.3.6.1.4.1.3955.1000.203.16.2.3 | ScalarapEmailAlertSentEmailCount | read-only | current | The number of emails messages successfully to be sent |
| 1.3.6.1.4.1.3955.1000.203.16.2.4 | ScalarapEmailAlertTimeSinceLastEmailSent | read-only | current | The timestamp of email alert feature when the last email was sent. |
| 1.3.6.1.4.1.3955.1000.203.16.2.5 | ScalarapEmailAlertTestMailStatus | read-only | current | The operational status of the last test-email action. |
| 1.3.6.1.4.1.3955.1000.203.17 | NodeapScheduler | |||
| 1.3.6.1.4.1.3955.1000.203.17.1 | NodeapSchedulerConfig | |||
| 1.3.6.1.4.1.3955.1000.203.17.1.1 | ScalarapSchedulerMode | read-write | current | Configuration mode for AP scheduler. |
| 1.3.6.1.4.1.3955.1000.203.17.1.2 | ScalarapSchedulerOperStatus | read-only | current | The operational status of the AP scheduler. |
| 1.3.6.1.4.1.3955.1000.203.17.1.3 | ScalarapSchedulerReasonCode | read-only | current | Defines the reason for the operational status of scheduler. |
| 1.3.6.1.4.1.3955.1000.203.17.2 | NodeapSchedulerProfile | |||
| 1.3.6.1.4.1.3955.1000.203.17.2.1 | TableapSchedulerProfileTable | not-accessible | current | The Scheduler Profile table for profile entries. Can configure up to 16 Profiles and each profile is associated with a set of rules defined in apSchedulerProfi… |
| 1.3.6.1.4.1.3955.1000.203.17.2.1.1 | RowapSchedulerProfileEntry | not-accessible | current | Entry in scheduler profile table. |
| 1.3.6.1.4.1.3955.1000.203.17.2.1.1.1 | ColumnapSchedulerProfileIndex | not-accessible | current | The Scheduler profile index. |
| 1.3.6.1.4.1.3955.1000.203.17.2.1.1.2 | ColumnapSchedulerProfileName | not-accessible | current | The Scheduler profile name. |
| 1.3.6.1.4.1.3955.1000.203.17.2.1.1.3 | ColumnapSchedulerProfileRowStatus | read-create | current | Status of an entry. Supported values are: - active (1) - createAndGo (4) - createAndWait (5) - destroy (6) The administrator can only use createAndGo, createAn… |
| 1.3.6.1.4.1.3955.1000.203.17.2.2 | TableapSchedulerProfileRuleTable | not-accessible | current | The Scheduler Profile Rule table for rule entries. Can configure up to 16 rules and each rule is associated with a profile defined in apSchedulerProfileTable t… |
| 1.3.6.1.4.1.3955.1000.203.17.2.2.1 | RowapSchedulerProfileRuleEntry | not-accessible | current | Entry in scheduler rule table. |
| 1.3.6.1.4.1.3955.1000.203.17.2.2.1.1 | ColumnapSchedulerProfileRuleIndex | not-accessible | current | The Scheduler profile index. This is reference to the apSchedulerProfileTable. |
| 1.3.6.1.4.1.3955.1000.203.17.2.2.1.2 | ColumnapSchedulerProfileRuleNum | not-accessible | current | The Scheduler rule number. Index for this table. |
| 1.3.6.1.4.1.3955.1000.203.17.2.2.1.3 | ColumnapSchedulerProfileDay | read-create | current | Defines the week of the day for the rule. The rule is applied on the specified day (or days). |
| 1.3.6.1.4.1.3955.1000.203.17.2.2.1.4 | ColumnapSchedulerStartTime | read-create | current | Defines the start time of the rule. The format is HH:MM with hour between 0 to 24 and minute between 0 to 59. |
| 1.3.6.1.4.1.3955.1000.203.17.2.2.1.5 | ColumnapSchedulerEndTime | read-create | current | Defines the end time of the rule. The format is HH:MM with hour between 0 to 24 and minute between 0 to 59. |
| 1.3.6.1.4.1.3955.1000.203.17.2.2.1.6 | ColumnapSchedulerProfileRuleRowStatus | read-create | current | Status of an entry. Supported values are: - active (1) - createAndGo (4) - createAndWait (5) - destroy (6) The administrator can only use createAndGo, createAn… |
| 1.3.6.1.4.1.3955.1000.203.19 | NodeapWgBridge | |||
| 1.3.6.1.4.1.3955.1000.203.19.1 | NodeapWgBridgeEntry | |||
| 1.3.6.1.4.1.3955.1000.203.19.1.1 | ScalarapWgBridgeRadioName | read-write | current | AP radio name. |
| 1.3.6.1.4.1.3955.1000.203.19.1.2 | ScalarapWgBridgeMode | read-write | current | Mode to enable AP to operate in Bridge Mode. If the value is up, AP will operate in Bridge Mode; Otherwise, the AP will operate in the normal default mode. |
| 1.3.6.1.4.1.3955.1000.203.19.2 | NodeapWgBridgeUpstrmEntry | |||
| 1.3.6.1.4.1.3955.1000.203.19.2.1 | ScalarapWgBridgeUpstrmName | read-only | current | Indicates name of interface. |
| 1.3.6.1.4.1.3955.1000.203.19.2.2 | ScalarapWgBridgeUpstrmBSSID | read-write | current | Indicates the Upstream BSSID. |
| 1.3.6.1.4.1.3955.1000.203.19.2.3 | ScalarapWgBridgeUpstrmSsid | read-write | current | Indicates the upstream SSID, which must consist of 1 to 32 alphanumeric characters and uniquely identify this upstream SSID. |
| 1.3.6.1.4.1.3955.1000.203.19.2.4 | ScalarapWgBridgeUpstrmSecurity | read-write | current | Indicates security to use to connect to the upstream AP. |
| 1.3.6.1.4.1.3955.1000.203.19.2.5 | ScalarapWgBridgeUpstrmWpaPersonalKey | read-write | current | Pre-shared key for Wireless Protected Access (WPA) personal. Only used when security is wpa-personal. Valid value is an ASCII string between 8 and 63 character… |
| 1.3.6.1.4.1.3955.1000.203.19.2.6 | ScalarapWgBridgeUpstrmWepKeyAscii | read-write | current | Indicates whether or not the Wired Equivalent Privacy (WEP) Key is in ASCII or HEX. |
| 1.3.6.1.4.1.3955.1000.203.19.2.7 | ScalarapWgBridgeUpstrmWepKeyLength | read-write | current | Length of the WEP key. The key length values used by the SNMP do not include the initialization vector in the length. On the web UI, longer key length values m… |
| 1.3.6.1.4.1.3955.1000.203.19.2.8 | ScalarapWgBridgeUpstrmWepDefaultKey | read-write | current | Indicates the WEP key index to use when transmitting. Only used when security is static-wep. Valid value is a number between 1 and 4. |
| 1.3.6.1.4.1.3955.1000.203.19.2.9 | ScalarapWgBridgeUpstrmWepKey1 | read-write | current | Configure WEP key 1. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If Key Length is 40 bits and th… |
| 1.3.6.1.4.1.3955.1000.203.19.2.10 | ScalarapWgBridgeUpstrmWepKey2 | read-write | current | Configure WEP key 2. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If Key Length is 40 bits and th… |
| 1.3.6.1.4.1.3955.1000.203.19.2.11 | ScalarapWgBridgeUpstrmWepKey3 | read-write | current | Configure WEP key 3. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If Key Length is 40 bits and th… |
| 1.3.6.1.4.1.3955.1000.203.19.2.12 | ScalarapWgBridgeUpstrmWepKey4 | read-write | current | Configure WEP key 4. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If Key Length is 40 bits and th… |
| 1.3.6.1.4.1.3955.1000.203.19.2.13 | ScalarapWgBridgeUpstrmOpenSystemAuth | read-only | obsolete | Indicates whether Open System authentication is permitted. Only used when security is static-wep. |
| 1.3.6.1.4.1.3955.1000.203.19.2.14 | ScalarapWgBridgeUpstrmSharedKeyAuth | read-only | obsolete | Indicates whether Shared Key authentication is permitted. Only used when security is static-wep. |
| 1.3.6.1.4.1.3955.1000.203.19.2.15 | ScalarapWgBridgeUpstrmWpaAllowed | read-write | current | Indicates whether WPA is allowed. apWgBridgeUpstrmWpa2Allowed must be set to 'true' to turn off WPA (false). |
| 1.3.6.1.4.1.3955.1000.203.19.2.16 | ScalarapWgBridgeUpstrmWpa2Allowed | read-write | current | Indicates whether WPA2 is allowed. apWgBridgeUpstrmWpaAllowed must be set to 'true' to turn off WPA2(false). |
| 1.3.6.1.4.1.3955.1000.203.19.2.17 | ScalarapWgBridgeUpstrmVlanID | read-write | current | VLAN ID associated with VAP. |
| 1.3.6.1.4.1.3955.1000.203.19.2.18 | ScalarapWgBridgeUpstrmConnStatus | read-only | current | Conection Status of the Upstream Interface. |
| 1.3.6.1.4.1.3955.1000.203.19.2.19 | ScalarapWgBridgeUpstrmRxBytes | read-only | current | Indicates received bytes. |
| 1.3.6.1.4.1.3955.1000.203.19.2.20 | ScalarapWgBridgeUpstrmRxPackets | read-only | current | Indicates received packets. |
| 1.3.6.1.4.1.3955.1000.203.19.2.21 | ScalarapWgBridgeUpstrmTxBytes | read-only | current | Indicates transmitted bytes. |
| 1.3.6.1.4.1.3955.1000.203.19.2.22 | ScalarapWgBridgeUpstrmTxPackets | read-only | current | Indicates transmitted packets. |
| 1.3.6.1.4.1.3955.1000.203.19.2.23 | ScalarapWgBridgeUpstrmConfigUser | read-write | current | Indicates the user name/identity used for WPA supplicant authentication. ASCII printable characters are allowed, which includes upper and lower case alphabetic… |
| 1.3.6.1.4.1.3955.1000.203.19.2.24 | ScalarapWgBridgeUpstrmConfigPassword | read-write | current | Configure the password used for WPA supplicant authentication. If apWgBridgeUpstrmConfigEapMethod is set to peap, this value is the user's password. If apWgBri… |
| 1.3.6.1.4.1.3955.1000.203.19.2.25 | ScalarapWgBridgeUpstrmConfigEapMethod | read-write | current | Configure the EAP Method used for WPA supplicant authentication. |
| 1.3.6.1.4.1.3955.1000.203.19.2.26 | ScalarapWgBridgeUpstrmCertificateFilePresent | read-only | current | Inidicates whether the TLS certificate file is present for use with WPA supplicant authentication. |
| 1.3.6.1.4.1.3955.1000.203.19.2.27 | ScalarapWgBridgeUpstrmCertificateFileExpirationDate | read-only | current | The expiration date of the TLS certificate |
| 1.3.6.1.4.1.3955.1000.203.19.2.28 | ScalarapWgBridgeUpstrmCertificateTFTPServerAddressType | read-only | current | Type of the IP address as defined in the InetAddress MIB. This is the address type of the TFTP server. |
| 1.3.6.1.4.1.3955.1000.203.19.2.29 | ScalarapWgBridgeUpstrmCertificateTFTPServerAddress | read-write | current | The address of the TFTP Server from which to get the certificate file. |
| 1.3.6.1.4.1.3955.1000.203.19.2.30 | ScalarapWgBridgeUpstrmCertificateTFTPServerPort | read-write | current | The port on the TFTP Server from which to get the certificate file. |
| 1.3.6.1.4.1.3955.1000.203.19.2.31 | ScalarapWgBridgeUpstrmCertificateUploadDirectory | read-write | current | Directory on the server from which to get the certificate file. This directory name does not contain the filename. |
| 1.3.6.1.4.1.3955.1000.203.19.2.32 | ScalarapWgBridgeUpstrmCertificateUploadFilename | read-write | current | File name on the server of the certificate file. |
| 1.3.6.1.4.1.3955.1000.203.19.2.33 | ScalarapWgBridgeUpstrmCertificateUploadProtocol | read-only | current | The protocol used for uploading the certificate file. |
| 1.3.6.1.4.1.3955.1000.203.19.2.34 | ScalarapWgBridgeUpstrmCertificateUploadStart | read-write | current | This object initiates the certificate file upload to the AP. |
| 1.3.6.1.4.1.3955.1000.203.19.2.35 | ScalarapWgBridgeUpstrmCertificateUploadStatus | read-only | current | The upload status of the certificate file to the AP. |
| 1.3.6.1.4.1.3955.1000.203.19.3 | NodeapWgBridgeDwstrmEntry | |||
| 1.3.6.1.4.1.3955.1000.203.19.3.1 | ScalarapWgBridgeDwstrmName | read-only | current | Indicates name of interface. |
| 1.3.6.1.4.1.3955.1000.203.19.3.2 | ScalarapWgBridgeDwstrmSsid | read-write | current | Indicates the downstream SSID, which must consist of 1 to 32 alphanumeric characters and uniquely identify this downstream SSID. |
| 1.3.6.1.4.1.3955.1000.203.19.3.3 | ScalarapWgBridgeDwstrmSecurity | read-write | current | Indicates security to use for downstream interface. |
| 1.3.6.1.4.1.3955.1000.203.19.3.4 | ScalarapWgBridgeDwstrmWpaPersonalKey | read-write | current | Pre-shared key for Wireless Protected Access (WPA) personal. Only used when security is wpa-personal. Valid value is an ASCII string between 8 and 63 character… |
| 1.3.6.1.4.1.3955.1000.203.19.3.5 | ScalarapWgBridgeDwstrmWepKeyAscii | read-write | current | Indicates whether or not the Wired Equivalent Privacy (WEP) Key is in ASCII or HEX. |
| 1.3.6.1.4.1.3955.1000.203.19.3.6 | ScalarapWgBridgeDwstrmWepKeyLength | read-write | current | Length of the WEP key. The key length values used by the SNMP do not include the initialization vector in the length. On the web UI, longer key length values m… |
| 1.3.6.1.4.1.3955.1000.203.19.3.7 | ScalarapWgBridgeDwstrmWepDefaultKey | read-write | current | Indicates the WEP key index to use when transmitting. Only used when security is static-wep. Valid value is a number between 1 and 4. |
| 1.3.6.1.4.1.3955.1000.203.19.3.8 | ScalarapWgBridgeDwstrmWepKey1 | read-write | current | Configure WEP key 1. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If Key Length is 40 bits and th… |
| 1.3.6.1.4.1.3955.1000.203.19.3.9 | ScalarapWgBridgeDwstrmWepKey2 | read-write | current | Configure WEP key 2. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If Key Length is 40 bits and th… |
| 1.3.6.1.4.1.3955.1000.203.19.3.10 | ScalarapWgBridgeDwstrmWepKey3 | read-write | current | Configure WEP key 3. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If Key Length is 40 bits and th… |
| 1.3.6.1.4.1.3955.1000.203.19.3.11 | ScalarapWgBridgeDwstrmWepKey4 | read-write | current | Configure WEP key 4. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If Key Length is 40 bits and th… |
| 1.3.6.1.4.1.3955.1000.203.19.3.12 | ScalarapWgBridgeDwstrmOpenSystemAuth | read-write | current | Indicates whether Open System authentication is permitted. Only used when security is static-wep. |
| 1.3.6.1.4.1.3955.1000.203.19.3.13 | ScalarapWgBridgeDwstrmSharedKeyAuth | read-write | current | Indicates whether Shared Key authentication is permitted. Only used when security is static-wep. |
| 1.3.6.1.4.1.3955.1000.203.19.3.14 | ScalarapWgBridgeDwstrmWpaCipherTkip | read-write | current | Indicates whether Temporal Key Integral Protocol (TKIP) is permitted as a WPA cipher. Only used when security is wpa-personal. apWgBridgeDwstrmWpaCipherCcmp mu… |
| 1.3.6.1.4.1.3955.1000.203.19.3.15 | ScalarapWgBridgeDwstrmWpaCipherCcmp | read-write | current | Indicates whether CCMP is permitted as a WPA cipher. Only used when security is wpa-personal. apWgBridgeDwstrmWpaCipherTkip must be 'true' to turn off (false) … |
| 1.3.6.1.4.1.3955.1000.203.19.3.16 | ScalarapWgBridgeDwstrmWpaAllowed | read-write | current | Indicates whether WPA is allowed. Only used when security is wpa-personal. apWgBridgeDwstrmWpa2Allowed must be 'true' to turn off (false) apWgBridgeDwstrmWpaAl… |
| 1.3.6.1.4.1.3955.1000.203.19.3.17 | ScalarapWgBridgeDwstrmWpa2Allowed | read-write | current | Indicates whether WPA2 is allowed. Only used when security is wpa-personal. apWgBridgeDwstrmWpaAllowed must be 'true' to turn off (false) apWgBridgeDwstrmWpa2A… |
| 1.3.6.1.4.1.3955.1000.203.19.3.18 | ScalarapWgBridgeDwstrmVlanID | read-write | current | VLAN ID associated with VAP. |
| 1.3.6.1.4.1.3955.1000.203.19.3.19 | ScalarapWgBridgeDwstrmStatus | read-write | current | Indicates the status of the downstream interface. |
| 1.3.6.1.4.1.3955.1000.203.19.3.20 | ScalarapWgBridgeDwstrmMacAclMode | read-only | current | Mode for the MAC access list. |
| 1.3.6.1.4.1.3955.1000.203.19.3.21 | ScalarapWgBridgeDwstrmMacAclName | read-only | obsolete | MAC ACL name from the existing list of MAC ACL instances. |
| 1.3.6.1.4.1.3955.1000.203.19.3.22 | ScalarapWgBridgeDwstrmIgnoreBcastSsid | read-write | current | When true, the SSID string is not included in beacons and broadcast probes are ignored. |
| 1.3.6.1.4.1.3955.1000.203.19.3.23 | ScalarapWgBridgeDwstrmBcastKeyRefreshRate | read-write | current | Specifies the interval after which the broadcast keys are changed. Only used when security is wpa-personal. |
| 1.3.6.1.4.1.3955.1000.203.19.3.24 | ScalarapWgBridgeDwstrmRxBytes | read-only | current | Indicates received bytes. |
| 1.3.6.1.4.1.3955.1000.203.19.3.25 | ScalarapWgBridgeDwstrmRxPackets | read-only | current | Indicates received packets. |
| 1.3.6.1.4.1.3955.1000.203.19.3.26 | ScalarapWgBridgeDwstrmTxBytes | read-only | current | Indicates transmitted bytes. |
| 1.3.6.1.4.1.3955.1000.203.19.3.27 | ScalarapWgBridgeDwstrmTxPackets | read-only | current | Indicates transmitted packets. |
| 1.3.6.1.4.1.3955.1000.203.19.3.28 | ScalarapWgBridgeDwstrmMacAclAuthType | read-write | current | Type for the MAC access authentication. |
| 1.3.6.1.4.1.3955.1000.203.20 | NodeapLldp | |||
| 1.3.6.1.4.1.3955.1000.203.20.1 | ScalarapLldpMode | read-write | current | Administative mode of LLDP. By default it is enabled. |
| 1.3.6.1.4.1.3955.1000.203.20.2 | ScalarapLldpTransmitInterval | read-write | current | Specifies the number of seconds between LLDP message transmissions. Default value of Transmission interval is 30 seconds |
| 1.3.6.1.4.1.3955.1000.203.20.3 | ScalarapLldppoePriority | read-write | current | Indicates the priority level transmitted by the AP in the Extended Power information element. If the priority is not configured or known by the PD, the value u… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ApAntennaSel | INTEGER { leftAndright(1), leftAndmiddle(2), middleAndright(3) } | current | The integer representation of Antenna numbers |
| ApBssId | OCTET STRING (SIZE(0..64)) | current | A short string that uniquely idenfities a BSS. |
| ApLogSeverity | INTEGER { none(-1), emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), informational(6), debug(7) } | current | Severity code used in determining the Log Priority value. |
| ApRadioId | OCTET STRING (SIZE(0..32)) | current | A short string that uniquely identifies a radio. |
| ApSsid | OCTET STRING | current | An SSID represented as an octet string. |
| TspecSuppAC | INTEGER { voice(0), video(1) } | current | Access category (AC) used for TSPEC. Only those ACs that support mandatory admission control are listed here. |