LLDP-MIB
114 objects
Management Information Base module for LLDP configuration, statistics, local system data and remote systems data components. Copyright (C) IEEE (2005). This version of this MIB module is published as subclause 12.1 of IEEE Std 802.1AB-2005; see the standard itself for full legal notices.
Imported Objects
| IANA-ADDRESS-FAMILY-NUMBERS-MIB | AddressFamilyNumbers |
| RMON2-MIB | TimeFilter ZeroBasedCounter32 |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.0.8802.1.1.2 | IdentitylldpMIB | Management Information Base module for LLDP configuration, statistics, local system data and remote systems data components. Copyright (C) IEEE (2005). This ve… | ||
| 1.0.8802.1.1.2.0 | NodelldpNotifications | |||
| 1.0.8802.1.1.2.0.0 | NodelldpNotificationPrefix | |||
| 1.0.8802.1.1.2.0.0.1 | NotificationlldpRemTablesChange | current | A lldpRemTablesChange notification is sent when the value of lldpStatsRemTableLastChangeTime changes. It can be utilized by an NMS to trigger LLDP remote syste… | |
| 1.0.8802.1.1.2.1 | NodelldpObjects | |||
| 1.0.8802.1.1.2.1.1 | NodelldpConfiguration | |||
| 1.0.8802.1.1.2.1.1.1 | ScalarlldpMessageTxInterval | read-write | current | The interval at which LLDP frames are transmitted on behalf of this LLDP agent. The default value for lldpMessageTxInterval object is 30 seconds. The value of … |
| 1.0.8802.1.1.2.1.1.2 | ScalarlldpMessageTxHoldMultiplier | read-write | current | The time-to-live value expressed as a multiple of the lldpMessageTxInterval object. The actual time-to-live value used in LLDP frames, transmitted on behalf of… |
| 1.0.8802.1.1.2.1.1.3 | ScalarlldpReinitDelay | read-write | current | The lldpReinitDelay indicates the delay (in units of seconds) from when lldpPortConfigAdminStatus object of a particular port becomes 'disabled' until re-initi… |
| 1.0.8802.1.1.2.1.1.4 | ScalarlldpTxDelay | read-write | current | The lldpTxDelay indicates the delay (in units of seconds) between successive LLDP frame transmissions initiated by value/status changes in the LLDP local syste… |
| 1.0.8802.1.1.2.1.1.5 | ScalarlldpNotificationInterval | read-write | current | This object controls the transmission of LLDP notifications. the agent must not generate more than one lldpRemTablesChange notification-event in the indicated … |
| 1.0.8802.1.1.2.1.1.6 | TablelldpPortConfigTable | not-accessible | current | The table that controls LLDP frame transmission on individual ports. |
| 1.0.8802.1.1.2.1.1.6.1 | RowlldpPortConfigEntry | not-accessible | current | LLDP configuration information for a particular port. This configuration parameter controls the transmission and the reception of LLDP frames on those ports wh… |
| 1.0.8802.1.1.2.1.1.6.1.1 | ColumnlldpPortConfigPortNum | not-accessible | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i… |
| 1.0.8802.1.1.2.1.1.6.1.2 | ColumnlldpPortConfigAdminStatus | read-write | current | The administratively desired status of the local LLDP agent. If the associated lldpPortConfigAdminStatus object has a value of 'txOnly(1)', then LLDP agent wil… |
| 1.0.8802.1.1.2.1.1.6.1.3 | ColumnlldpPortConfigNotificationEnable | read-write | current | The lldpPortConfigNotificationEnable controls, on a per port basis, whether or not notifications from the agent are enabled. The value true(1) means that notif… |
| 1.0.8802.1.1.2.1.1.6.1.4 | ColumnlldpPortConfigTLVsTxEnable | read-write | current | The lldpPortConfigTLVsTxEnable, defined as a bitmap, includes the basic set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network m… |
| 1.0.8802.1.1.2.1.1.7 | TablelldpConfigManAddrTable | not-accessible | current | The table that controls selection of LLDP management address TLV instances to be transmitted on individual ports. |
| 1.0.8802.1.1.2.1.1.7.1 | RowlldpConfigManAddrEntry | not-accessible | current | LLDP configuration information that specifies the set of ports (represented as a PortList) on which the local system management address instance will be transm… |
| 1.0.8802.1.1.2.1.1.7.1.1 | ColumnlldpConfigManAddrPortsTxEnable | read-write | current | A set of ports that are identified by a PortList, in which each port is represented as a bit. The corresponding local system management address instance will b… |
| 1.0.8802.1.1.2.1.2 | NodelldpStatistics | |||
| 1.0.8802.1.1.2.1.2.1 | ScalarlldpStatsRemTablesLastChangeTime | read-only | current | The value of sysUpTime object (defined in IETF RFC 3418) at the time an entry is created, modified, or deleted in the in tables associated with the lldpRemoteS… |
| 1.0.8802.1.1.2.1.2.2 | ScalarlldpStatsRemTablesInserts | read-only | current | The number of times the complete set of information advertised by a particular MSAP has been inserted into tables contained in lldpRemoteSystemsData and lldpEx… |
| 1.0.8802.1.1.2.1.2.3 | ScalarlldpStatsRemTablesDeletes | read-only | current | The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExt… |
| 1.0.8802.1.1.2.1.2.4 | ScalarlldpStatsRemTablesDrops | read-only | current | The number of times the complete set of information advertised by a particular MSAP could not be entered into tables contained in lldpRemoteSystemsData and lld… |
| 1.0.8802.1.1.2.1.2.5 | ScalarlldpStatsRemTablesAgeouts | read-only | current | The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExt… |
| 1.0.8802.1.1.2.1.2.6 | TablelldpStatsTxPortTable | not-accessible | current | A table containing LLDP transmission statistics for individual ports. Entries are not required to exist in this table while the lldpPortConfigEntry object is e… |
| 1.0.8802.1.1.2.1.2.6.1 | RowlldpStatsTxPortEntry | not-accessible | current | LLDP frame transmission statistics for a particular port. The port must be contained in the same chassis as the LLDP agent. All counter values in a particular … |
| 1.0.8802.1.1.2.1.2.6.1.1 | ColumnlldpStatsTxPortNum | not-accessible | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i… |
| 1.0.8802.1.1.2.1.2.6.1.2 | ColumnlldpStatsTxPortFramesTotal | read-only | current | The number of LLDP frames transmitted by this LLDP agent on the indicated port. |
| 1.0.8802.1.1.2.1.2.7 | TablelldpStatsRxPortTable | not-accessible | current | A table containing LLDP reception statistics for individual ports. Entries are not required to exist in this table while the lldpPortConfigEntry object is equa… |
| 1.0.8802.1.1.2.1.2.7.1 | RowlldpStatsRxPortEntry | not-accessible | current | LLDP frame reception statistics for a particular port. The port must be contained in the same chassis as the LLDP agent. All counter values in a particular ent… |
| 1.0.8802.1.1.2.1.2.7.1.1 | ColumnlldpStatsRxPortNum | not-accessible | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i… |
| 1.0.8802.1.1.2.1.2.7.1.2 | ColumnlldpStatsRxPortFramesDiscardedTotal | read-only | current | The number of LLDP frames received by this LLDP agent on the indicated port, and then discarded for any reason. This counter can provide an indication that LLD… |
| 1.0.8802.1.1.2.1.2.7.1.3 | ColumnlldpStatsRxPortFramesErrors | read-only | current | The number of invalid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled. |
| 1.0.8802.1.1.2.1.2.7.1.4 | ColumnlldpStatsRxPortFramesTotal | read-only | current | The number of valid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled. |
| 1.0.8802.1.1.2.1.2.7.1.5 | ColumnlldpStatsRxPortTLVsDiscardedTotal | read-only | current | The number of LLDP TLVs discarded for any reason by this LLDP agent on the indicated port. |
| 1.0.8802.1.1.2.1.2.7.1.6 | ColumnlldpStatsRxPortTLVsUnrecognizedTotal | read-only | current | The number of LLDP TLVs received on the given port that are not recognized by this LLDP agent on the indicated port. An unrecognized TLV is referred to as the … |
| 1.0.8802.1.1.2.1.2.7.1.7 | ColumnlldpStatsRxPortAgeoutsTotal | read-only | current | The counter that represents the number of age-outs that occurred on a given port. An age-out is the number of times the complete set of information advertised … |
| 1.0.8802.1.1.2.1.3 | NodelldpLocalSystemData | |||
| 1.0.8802.1.1.2.1.3.1 | ScalarlldpLocChassisIdSubtype | read-only | current | The type of encoding used to identify the chassis associated with the local system. |
| 1.0.8802.1.1.2.1.3.2 | ScalarlldpLocChassisId | read-only | current | The string value used to identify the chassis component associated with the local system. |
| 1.0.8802.1.1.2.1.3.3 | ScalarlldpLocSysName | read-only | current | The string value used to identify the system name of the local system. If the local agent supports IETF RFC 3418, lldpLocSysName object should have the same va… |
| 1.0.8802.1.1.2.1.3.4 | ScalarlldpLocSysDesc | read-only | current | The string value used to identify the system description of the local system. If the local agent supports IETF RFC 3418, lldpLocSysDesc object should have the … |
| 1.0.8802.1.1.2.1.3.5 | ScalarlldpLocSysCapSupported | read-only | current | The bitmap value used to identify which system capabilities are supported on the local system. |
| 1.0.8802.1.1.2.1.3.6 | ScalarlldpLocSysCapEnabled | read-only | current | The bitmap value used to identify which system capabilities are enabled on the local system. |
| 1.0.8802.1.1.2.1.3.7 | TablelldpLocPortTable | not-accessible | current | This table contains one or more rows per port information associated with the local system known to this agent. |
| 1.0.8802.1.1.2.1.3.7.1 | RowlldpLocPortEntry | not-accessible | current | Information about a particular port component. Entries may be created and deleted in this table by the agent. |
| 1.0.8802.1.1.2.1.3.7.1.1 | ColumnlldpLocPortNum | not-accessible | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i… |
| 1.0.8802.1.1.2.1.3.7.1.2 | ColumnlldpLocPortIdSubtype | read-only | current | The type of port identifier encoding used in the associated 'lldpLocPortId' object. |
| 1.0.8802.1.1.2.1.3.7.1.3 | ColumnlldpLocPortId | read-only | current | The string value used to identify the port component associated with a given port in the local system. |
| 1.0.8802.1.1.2.1.3.7.1.4 | ColumnlldpLocPortDesc | read-only | current | The string value used to identify the 802 LAN station's port description associated with the local system. If the local agent supports IETF RFC 2863, lldpLocPo… |
| 1.0.8802.1.1.2.1.3.8 | TablelldpLocManAddrTable | not-accessible | current | This table contains management address information on the local system known to this agent. |
| 1.0.8802.1.1.2.1.3.8.1 | RowlldpLocManAddrEntry | not-accessible | current | Management address information about a particular chassis component. There may be multiple management addresses configured on the system identified by a partic… |
| 1.0.8802.1.1.2.1.3.8.1.1 | ColumnlldpLocManAddrSubtype | not-accessible | current | The type of management address identifier encoding used in the associated 'lldpLocManagmentAddr' object. |
| 1.0.8802.1.1.2.1.3.8.1.2 | ColumnlldpLocManAddr | not-accessible | current | The string value used to identify the management address component associated with the local system. The purpose of this address is to contact the management e… |
| 1.0.8802.1.1.2.1.3.8.1.3 | ColumnlldpLocManAddrLen | read-only | current | The total length of the management address subtype and the management address fields in LLDPDUs transmitted by the local LLDP agent. The management address len… |
| 1.0.8802.1.1.2.1.3.8.1.4 | ColumnlldpLocManAddrIfSubtype | read-only | current | The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the local system. |
| 1.0.8802.1.1.2.1.3.8.1.5 | ColumnlldpLocManAddrIfId | read-only | current | The integer value used to identify the interface number regarding the management address component associated with the local system. |
| 1.0.8802.1.1.2.1.3.8.1.6 | ColumnlldpLocManAddrOID | read-only | current | The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the local system agent. |
| 1.0.8802.1.1.2.1.4 | NodelldpRemoteSystemsData | |||
| 1.0.8802.1.1.2.1.4.1 | TablelldpRemTable | not-accessible | current | This table contains one or more rows per physical network connection known to this agent. The agent may wish to ensure that only one lldpRemEntry is present fo… |
| 1.0.8802.1.1.2.1.4.1.1 | RowlldpRemEntry | not-accessible | current | Information about a particular physical network connection. Entries may be created and deleted in this table by the agent, if a physical topology discovery pro… |
| 1.0.8802.1.1.2.1.4.1.1.1 | ColumnlldpRemTimeMark | not-accessible | current | A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to … |
| 1.0.8802.1.1.2.1.4.1.1.2 | ColumnlldpRemLocalPortNum | not-accessible | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpRemLocalPortNum id… |
| 1.0.8802.1.1.2.1.4.1.1.3 | ColumnlldpRemIndex | not-accessible | current | This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote s… |
| 1.0.8802.1.1.2.1.4.1.1.4 | ColumnlldpRemChassisIdSubtype | read-only | current | The type of encoding used to identify the chassis associated with the remote system. |
| 1.0.8802.1.1.2.1.4.1.1.5 | ColumnlldpRemChassisId | read-only | current | The string value used to identify the chassis component associated with the remote system. |
| 1.0.8802.1.1.2.1.4.1.1.6 | ColumnlldpRemPortIdSubtype | read-only | current | The type of port identifier encoding used in the associated 'lldpRemPortId' object. |
| 1.0.8802.1.1.2.1.4.1.1.7 | ColumnlldpRemPortId | read-only | current | The string value used to identify the port component associated with the remote system. |
| 1.0.8802.1.1.2.1.4.1.1.8 | ColumnlldpRemPortDesc | read-only | current | The string value used to identify the description of the given port associated with the remote system. |
| 1.0.8802.1.1.2.1.4.1.1.9 | ColumnlldpRemSysName | read-only | current | The string value used to identify the system name of the remote system. |
| 1.0.8802.1.1.2.1.4.1.1.10 | ColumnlldpRemSysDesc | read-only | current | The string value used to identify the system description of the remote system. |
| 1.0.8802.1.1.2.1.4.1.1.11 | ColumnlldpRemSysCapSupported | read-only | current | The bitmap value used to identify which system capabilities are supported on the remote system. |
| 1.0.8802.1.1.2.1.4.1.1.12 | ColumnlldpRemSysCapEnabled | read-only | current | The bitmap value used to identify which system capabilities are enabled on the remote system. |
| 1.0.8802.1.1.2.1.4.2 | TablelldpRemManAddrTable | not-accessible | current | This table contains one or more rows per management address information on the remote system learned on a particular port contained in the local chassis known … |
| 1.0.8802.1.1.2.1.4.2.1 | RowlldpRemManAddrEntry | not-accessible | current | Management address information about a particular chassis component. There may be multiple management addresses configured on the remote system identified by a… |
| 1.0.8802.1.1.2.1.4.2.1.1 | ColumnlldpRemManAddrSubtype | not-accessible | current | The type of management address identifier encoding used in the associated 'lldpRemManagmentAddr' object. |
| 1.0.8802.1.1.2.1.4.2.1.2 | ColumnlldpRemManAddr | not-accessible | current | The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management … |
| 1.0.8802.1.1.2.1.4.2.1.3 | ColumnlldpRemManAddrIfSubtype | read-only | current | The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the remote system. |
| 1.0.8802.1.1.2.1.4.2.1.4 | ColumnlldpRemManAddrIfId | read-only | current | The integer value used to identify the interface number regarding the management address component associated with the remote system. |
| 1.0.8802.1.1.2.1.4.2.1.5 | ColumnlldpRemManAddrOID | read-only | current | The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent. |
| 1.0.8802.1.1.2.1.4.3 | TablelldpRemUnknownTLVTable | not-accessible | current | This table contains information about an incoming TLV which is not recognized by the receiving LLDP agent. The TLV may be from a later version of the basic man… |
| 1.0.8802.1.1.2.1.4.3.1 | RowlldpRemUnknownTLVEntry | not-accessible | current | Information about an unrecognized TLV received from a physical network connection. Entries may be created and deleted in this table by the agent, if a physical… |
| 1.0.8802.1.1.2.1.4.3.1.1 | ColumnlldpRemUnknownTLVType | not-accessible | current | This object represents the value extracted from the type field of the TLV. |
| 1.0.8802.1.1.2.1.4.3.1.2 | ColumnlldpRemUnknownTLVInfo | read-only | current | This object represents the value extracted from the value field of the TLV. |
| 1.0.8802.1.1.2.1.4.4 | TablelldpRemOrgDefInfoTable | not-accessible | current | This table contains one or more rows per physical network connection which advertises the organizationally defined information. Note that this table contains o… |
| 1.0.8802.1.1.2.1.4.4.1 | RowlldpRemOrgDefInfoEntry | not-accessible | current | Information about the unrecognized organizationally defined information advertised by the remote system. The lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex… |
| 1.0.8802.1.1.2.1.4.4.1.1 | ColumnlldpRemOrgDefInfoOUI | not-accessible | current | The Organizationally Unique Identifier (OUI), as defined in IEEE std 802-2001, is a 24 bit (three octets) globally unique assigned number referenced by various… |
| 1.0.8802.1.1.2.1.4.4.1.2 | ColumnlldpRemOrgDefInfoSubtype | not-accessible | current | The integer value used to identify the subtype of the organizationally defined information received from the remote system. The subtype value is required to id… |
| 1.0.8802.1.1.2.1.4.4.1.3 | ColumnlldpRemOrgDefInfoIndex | not-accessible | current | This object represents an arbitrary local integer value used by this agent to identify a particular unrecognized organizationally defined information instance,… |
| 1.0.8802.1.1.2.1.4.4.1.4 | ColumnlldpRemOrgDefInfo | read-only | current | The string value used to identify the organizationally defined information of the remote system. The encoding for this object should be as defined for SnmpAdmi… |
| 1.0.8802.1.1.2.1.5 | NodelldpExtensions | |||
| 1.0.8802.1.1.2.2 | NodelldpConformance | |||
| 1.0.8802.1.1.2.2.1 | NodelldpCompliances | |||
| 1.0.8802.1.1.2.2.1.1 | CompliancelldpCompliance | current | The compliance statement for SNMP entities which implement the LLDP MIB. | |
| 1.0.8802.1.1.2.2.2 | NodelldpGroups | |||
| 1.0.8802.1.1.2.2.2.1 | GrouplldpConfigGroup | current | The collection of objects which are used to configure the LLDP implementation behavior. This group is mandatory for agents which implement the LLDP. | |
| 1.0.8802.1.1.2.2.2.2 | GrouplldpConfigRxGroup | current | The collection of objects which are used to configure the LLDP implementation behavior. This group is mandatory for agents which implement the LLDP and have th… | |
| 1.0.8802.1.1.2.2.2.3 | GrouplldpConfigTxGroup | current | The collection of objects which are used to configure the LLDP implementation behavior. This group is mandatory for agents which implement the LLDP and have th… | |
| 1.0.8802.1.1.2.2.2.4 | GrouplldpStatsRxGroup | current | The collection of objects which are used to represent LLDP reception statistics. This group is mandatory for agents which implement the LLDP and have the capab… | |
| 1.0.8802.1.1.2.2.2.5 | GrouplldpStatsTxGroup | current | The collection of objects which are used to represent LLDP transmission statistics. This group is mandatory for agents which implement the LLDP and have the ca… | |
| 1.0.8802.1.1.2.2.2.6 | GrouplldpLocSysGroup | current | The collection of objects which are used to represent LLDP Local System Information. This group is mandatory for agents which implement the LLDP and have the c… | |
| 1.0.8802.1.1.2.2.2.7 | GrouplldpRemSysGroup | current | The collection of objects which are used to represent LLDP Remote Systems Information. The objects represent the information associated with the basic TLV set.… | |
| 1.0.8802.1.1.2.2.2.8 | GrouplldpNotificationsGroup | current | The collection of notifications used to indicate LLDP MIB data consistency and general status information. This group is mandatory for agents which implement t… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| LldpChassisId | OCTET STRING (SIZE (1..255)) | current | This TC describes the format of a chassis identifier string. Objects of this type are always used with an associated LldpChassisIdSubtype object, which identifies the format of the particular LldpChassisId object instan… |
| LldpChassisIdSubtype | INTEGER { chassisComponent(1), interfaceAlias(2), portComponent(3), macAddress(4), networkAddress(5), interfaceName(6), local(7) } | current | This TC describes the source of a chassis identifier. The enumeration 'chassisComponent(1)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a chassis componen… |
| LldpManAddress | OCTET STRING (SIZE (1..31)) | current | The value of a management address associated with the LLDP agent that may be used to reach higher layer entities to assist discovery by network management. It should be noted that appropriate security credentials, such … |
| LldpManAddrIfSubtype | INTEGER { unknown(1), ifIndex(2), systemPortNumber(3) } | current | This TC describes the basis of a particular type of interface associated with the management address. The enumeration 'unknown(1)' represents the case where the interface is not known. The enumeration 'ifIndex(2)' repre… |
| LldpPortId | OCTET STRING (SIZE (1..255)) | current | This TC describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If th… |
| LldpPortIdSubtype | INTEGER { interfaceAlias(1), portComponent(2), macAddress(3), networkAddress(4), interfaceName(5), agentCircuitId(6), local(7) } | current | This TC describes the source of a particular type of port identifier used in the LLDP MIB. The enumeration 'interfaceAlias(1)' represents a port identifier based on the ifAlias MIB object, defined in IETF RFC 2863. The … |
| LldpPortList | OCTET STRING (SIZE (0..512)) | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |
| LldpPortNumber | Integer32 (1..4096 ) | current | Each port contained in the chassis (that is known to the LLDP agent) is uniquely identified by a port number. A port number has no mandatory relationship to an InterfaceIndex object (of the interfaces MIB, IETF RFC 2863… |
| LldpSystemCapabilitiesMap | BITS { other(0), repeater(1), bridge(2), wlanAccessPoint(3), router(4), telephone(5), docsisCableDevice(6), stationOnly(7) } | current | This TC describes the system capabilities. The bit 'other(0)' indicates that the system has capabilities other than those listed below. The bit 'repeater(1)' indicates that the system has repeater capability. The bit 'b… |