LLDP-V2-MIB
125 objects
Management Information Base module for LLDP configuration, statistics, local system data and remote systems data components. This MIB module supports the architecture described in Clause 6, where multiple LLDP agents can be associated with a single Port, each supporting transmission by means of a different MAC address. Unless otherwise indicated, the references in this MIB module are to IEEE 802.1AB-2009. Copyright (C) IEEE (2009). This version of this MIB module is published as subclause 11.5.2 of IEEE Std 802.1AB-2009; see the standard itself for full legal notices.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.111.2.802.1.1.13 | IdentitylldpV2MIB | Management Information Base module for LLDP configuration, statistics, local system data and remote systems data components. This MIB module supports the archi… | ||
| 1.3.111.2.802.1.1.13.0 | NodelldpV2Notifications | |||
| 1.3.111.2.802.1.1.13.0.0 | NodelldpV2NotificationPrefix | |||
| 1.3.111.2.802.1.1.13.0.0.1 | NotificationlldpV2RemTablesChange | current | A lldpV2RemTablesChange notification is sent when the value of lldpV2StatsRemTablesLastChangeTime changes. It can be utilized by an NMS to trigger LLDP remote … | |
| 1.3.111.2.802.1.1.13.1 | NodelldpV2Objects | |||
| 1.3.111.2.802.1.1.13.1.1 | NodelldpV2Configuration | |||
| 1.3.111.2.802.1.1.13.1.1.1 | ScalarlldpV2MessageTxInterval | read-write | current | The interval at which LLDP frames are transmitted on behalf of this LLDP agent. The default value for lldpV2MessageTxInterval object is 30 seconds. The value o… |
| 1.3.111.2.802.1.1.13.1.1.2 | ScalarlldpV2MessageTxHoldMultiplier | read-write | current | The time-to-live value expressed as a multiple of the lldpV2MessageTxInterval object. The actual time-to-live value used in LLDP frames, transmitted on behalf … |
| 1.3.111.2.802.1.1.13.1.1.3 | ScalarlldpV2ReinitDelay | read-write | current | The lldpV2ReinitDelay indicates the delay (in units of seconds) from when lldpPortConfigAdminStatus object of a particular port becomes 'disabled' until re-ini… |
| 1.3.111.2.802.1.1.13.1.1.4 | ScalarlldpV2NotificationInterval | read-write | current | This object controls the interval between transmission of LLDP notifications during normal transmission periods. The value of this object is restored from non-… |
| 1.3.111.2.802.1.1.13.1.1.5 | ScalarlldpV2TxCreditMax | read-write | current | The maximum number of consecutive LLDPDUs that can be transmitted at any time. The default value for lldpV2TxCreditMax object is 5 PDUs. The value of this obje… |
| 1.3.111.2.802.1.1.13.1.1.6 | ScalarlldpV2MessageFastTx | read-write | current | The interval at which LLDP frames are transmitted on behalf of this LLDP agent during fast transmission period (e.g. when a new neighbor is detected). The defa… |
| 1.3.111.2.802.1.1.13.1.1.7 | ScalarlldpV2TxFastInit | read-write | current | The initial value used to initialize the txFast variable which determines the number of transmissions that are made in fast transmission mode. The default valu… |
| 1.3.111.2.802.1.1.13.1.1.8 | TablelldpV2PortConfigTable | not-accessible | current | The table that controls LLDP frame transmission on individual ports and using particular destination MAC addresses. |
| 1.3.111.2.802.1.1.13.1.1.8.1 | RowlldpV2PortConfigEntry | not-accessible | current | LLDP configuration information for a particular port and destination MAC address. This configuration parameter controls the transmission and the reception of L… |
| 1.3.111.2.802.1.1.13.1.1.8.1.1 | ColumnlldpV2PortConfigIfIndex | not-accessible | current | The interface index value used to identify the port associated with this entry. Its value is an index into the interfaces MIB. The value of this object is used… |
| 1.3.111.2.802.1.1.13.1.1.8.1.2 | ColumnlldpV2PortConfigDestAddressIndex | not-accessible | current | The index value used to identify the destination MAC address associated with this entry. Its value identifies the row in the lldpV2DestAddressTable where the M… |
| 1.3.111.2.802.1.1.13.1.1.8.1.3 | ColumnlldpV2PortConfigAdminStatus | read-write | current | The administratively desired status of the local LLDP agent. If the associated lldpV2PortConfigAdminStatus object is set to a value of 'txOnly(1)', then LLDP a… |
| 1.3.111.2.802.1.1.13.1.1.8.1.4 | ColumnlldpV2PortConfigNotificationEnable | read-write | current | The lldpV2PortConfigNotificationEnable controls, on a per agent basis, whether or not notifications from the agent are enabled. The value true(1) means that no… |
| 1.3.111.2.802.1.1.13.1.1.8.1.5 | ColumnlldpV2PortConfigTLVsTxEnable | read-write | current | The lldpV2PortConfigTLVsTxEnable, defined as a bitmap, includes the basic set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network… |
| 1.3.111.2.802.1.1.13.1.1.9 | TablelldpV2DestAddressTable | not-accessible | current | The table that contains the set of MAC addresses used by LLDP for transmission and reception of LLDPDUs. |
| 1.3.111.2.802.1.1.13.1.1.9.1 | RowlldpV2DestAddressTableEntry | not-accessible | current | Destination MAC address information for LLDP. This configuration parameter identifies a MAC address corresponding to a LldpV2DestAddressTableIndex value. Rows … |
| 1.3.111.2.802.1.1.13.1.1.9.1.1 | ColumnlldpV2AddressTableIndex | not-accessible | current | The index value used to identify the destination MAC address associated with this entry. The value of this object is used as an index to the lldpV2DestAddressT… |
| 1.3.111.2.802.1.1.13.1.1.9.1.2 | ColumnlldpV2DestMacAddress | read-only | current | The MAC address associated with this entry. The octet string identifies an individual or a group MAC address that is in use by LLDP as a destination MAC addres… |
| 1.3.111.2.802.1.1.13.1.1.10 | TablelldpV2ManAddrConfigTxPortsTable | not-accessible | current | The table that controls selection of LLDP management address TLV instances to be transmitted on individual port/ destination address pairs. |
| 1.3.111.2.802.1.1.13.1.1.10.1 | RowlldpV2ManAddrConfigTxPortsEntry | not-accessible | current | LLDP configuration information that specifies the set of port/destination address pairs on which the local system management address instance is transmitted. E… |
| 1.3.111.2.802.1.1.13.1.1.10.1.1 | ColumnlldpV2ManAddrConfigIfIndex | not-accessible | current | The interface index value used to identify the port associated with this entry. Its value is an index into the interfaces MIB. The value of this object is used… |
| 1.3.111.2.802.1.1.13.1.1.10.1.2 | ColumnlldpV2ManAddrConfigDestAddressIndex | not-accessible | current | The index value used to identify the destination MAC address associated with this entry. Its value identifies the row in the lldpV2DestAddressTable where the M… |
| 1.3.111.2.802.1.1.13.1.1.10.1.3 | ColumnlldpV2ManAddrConfigLocManAddrSubtype | not-accessible | current | The type of management address identifier encoding used in the associated 'lldpLocManagmentAddr' object. It should be noted that only a subset of the possible … |
| 1.3.111.2.802.1.1.13.1.1.10.1.4 | ColumnlldpV2ManAddrConfigLocManAddr | not-accessible | current | The string value used to identify the management address component associated with the local system. The purpose of this address is to contact the management e… |
| 1.3.111.2.802.1.1.13.1.1.10.1.5 | ColumnlldpV2ManAddrConfigTxEnable | read-create | current | A boolean controlling the transmission of system management address instance for the specified port, destination, subtype and MAN address used to index this ta… |
| 1.3.111.2.802.1.1.13.1.1.10.1.6 | ColumnlldpV2ManAddrConfigRowStatus | read-create | current | Indicates the status of an entry in this table, and is used to create/delete entries. The corresponding instances of the following objects must be set before t… |
| 1.3.111.2.802.1.1.13.1.2 | NodelldpV2Statistics | |||
| 1.3.111.2.802.1.1.13.1.2.1 | ScalarlldpV2StatsRemTablesLastChangeTime | read-only | current | The value of sysUpTime object (defined in IETF RFC 3418) at the time an entry is created, modified, or deleted in the in tables associated with the lldpV2Remot… |
| 1.3.111.2.802.1.1.13.1.2.2 | ScalarlldpV2StatsRemTablesInserts | read-only | current | The number of times the complete set of information advertised by a particular MSAP has been inserted into tables contained in lldpV2RemoteSystemsData and lldp… |
| 1.3.111.2.802.1.1.13.1.2.3 | ScalarlldpV2StatsRemTablesDeletes | read-only | current | The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpV2RemoteSystemsData and lldpV… |
| 1.3.111.2.802.1.1.13.1.2.4 | ScalarlldpV2StatsRemTablesDrops | read-only | current | The number of times the complete set of information advertised by a particular MSAP could not be entered into tables contained in lldpV2RemoteSystemsData and l… |
| 1.3.111.2.802.1.1.13.1.2.5 | ScalarlldpV2StatsRemTablesAgeouts | read-only | current | The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpV2RemoteSystemsData and lldpV… |
| 1.3.111.2.802.1.1.13.1.2.6 | TablelldpV2StatsTxPortTable | not-accessible | current | A table containing LLDP transmission statistics for individual port/destination address combinations. Entries are not required to exist in this table while the… |
| 1.3.111.2.802.1.1.13.1.2.6.1 | RowlldpV2StatsTxPortEntry | not-accessible | current | LLDP frame transmission statistics for a particular port and destination MAC address. The port is contained in the same chassis as the LLDP agent. All counter … |
| 1.3.111.2.802.1.1.13.1.2.6.1.1 | ColumnlldpV2StatsTxIfIndex | not-accessible | current | The interface index value used to identify the port associated with this entry. Its value is an index into the interfaces MIB The value of this object is used … |
| 1.3.111.2.802.1.1.13.1.2.6.1.2 | ColumnlldpV2StatsTxDestMACAddress | not-accessible | current | The index value used to identify the destination MAC address associated with this entry. Its value identifies the row in the lldpV2DestAddressTable where the M… |
| 1.3.111.2.802.1.1.13.1.2.6.1.3 | ColumnlldpV2StatsTxPortFramesTotal | read-only | current | The number of LLDP frames transmitted by this LLDP agent on the indicated port to the destination MAC address associated with this row of the table. |
| 1.3.111.2.802.1.1.13.1.2.6.1.4 | ColumnlldpV2StatsTxLLDPDULengthErrors | read-only | current | The number of LLDPDU Length Errors recorded for the Port. |
| 1.3.111.2.802.1.1.13.1.2.7 | TablelldpV2StatsRxPortTable | not-accessible | current | A table containing LLDP reception statistics for individual ports and destination MAC addresses. Entries are not required to exist in this table while the lldp… |
| 1.3.111.2.802.1.1.13.1.2.7.1 | RowlldpV2StatsRxPortEntry | not-accessible | current | LLDP frame reception statistics for a particular port. The port is contained in the same chassis as the LLDP agent. All counter values in a particular entry sh… |
| 1.3.111.2.802.1.1.13.1.2.7.1.1 | ColumnlldpV2StatsRxDestIfIndex | not-accessible | current | The interface index value used to identify the port associated with this entry. Its value is an index into the interfaces MIB The value of this object is used … |
| 1.3.111.2.802.1.1.13.1.2.7.1.2 | ColumnlldpV2StatsRxDestMACAddress | not-accessible | current | The index value used to identify the destination MAC address associated with this entry. Its value identifies the row in the lldpV2DestAddressTable where the M… |
| 1.3.111.2.802.1.1.13.1.2.7.1.3 | ColumnlldpV2StatsRxPortFramesDiscardedTotal | read-only | current | The number of LLDP frames received by this LLDP agent on the indicated port, and then discarded for any reason. This counter can provide an indication that LLD… |
| 1.3.111.2.802.1.1.13.1.2.7.1.4 | ColumnlldpV2StatsRxPortFramesErrors | read-only | current | The number of invalid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled. |
| 1.3.111.2.802.1.1.13.1.2.7.1.5 | ColumnlldpV2StatsRxPortFramesTotal | read-only | current | The number of valid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled. |
| 1.3.111.2.802.1.1.13.1.2.7.1.6 | ColumnlldpV2StatsRxPortTLVsDiscardedTotal | read-only | current | The number of LLDP TLVs discarded for any reason by this LLDP agent on the indicated port. |
| 1.3.111.2.802.1.1.13.1.2.7.1.7 | ColumnlldpV2StatsRxPortTLVsUnrecognizedTotal | read-only | current | The number of LLDP TLVs received on the given port that are not recognized by this LLDP agent on the indicated port. An unrecognized TLV is referred to as the … |
| 1.3.111.2.802.1.1.13.1.2.7.1.8 | ColumnlldpV2StatsRxPortAgeoutsTotal | read-only | current | The counter that represents the number of age-outs that occurred on a given port. An age-out is the number of times the complete set of information advertised … |
| 1.3.111.2.802.1.1.13.1.3 | NodelldpV2LocalSystemData | |||
| 1.3.111.2.802.1.1.13.1.3.1 | ScalarlldpV2LocChassisIdSubtype | read-only | current | The type of encoding used to identify the chassis associated with the local system. |
| 1.3.111.2.802.1.1.13.1.3.2 | ScalarlldpV2LocChassisId | read-only | current | The string value used to identify the chassis component associated with the local system. |
| 1.3.111.2.802.1.1.13.1.3.3 | ScalarlldpV2LocSysName | read-only | current | The string value used to identify the system name of the local system. If the local agent supports IETF RFC 3418, lldpLocSysName object should have the same va… |
| 1.3.111.2.802.1.1.13.1.3.4 | ScalarlldpV2LocSysDesc | read-only | current | The string value used to identify the system description of the local system. If the local agent supports IETF RFC 3418, lldpLocSysDesc object should have the … |
| 1.3.111.2.802.1.1.13.1.3.5 | ScalarlldpV2LocSysCapSupported | read-only | current | The bitmap value used to identify which system capabilities are supported on the local system. |
| 1.3.111.2.802.1.1.13.1.3.6 | ScalarlldpV2LocSysCapEnabled | read-only | current | The bitmap value used to identify which system capabilities are enabled on the local system. |
| 1.3.111.2.802.1.1.13.1.3.7 | TablelldpV2LocPortTable | not-accessible | current | This table contains one row per port of information associated with the local system known to this agent. |
| 1.3.111.2.802.1.1.13.1.3.7.1 | RowlldpV2LocPortEntry | not-accessible | current | Information about a particular port component. Entries may be created and deleted in this table by the agent. Rows in this table can only be created for MAC ad… |
| 1.3.111.2.802.1.1.13.1.3.7.1.1 | ColumnlldpV2LocPortIfIndex | not-accessible | current | The interface index value used to identify the port associated with this entry. Its value is an index into the interfaces MIB The value of this object is used … |
| 1.3.111.2.802.1.1.13.1.3.7.1.2 | ColumnlldpV2LocPortIdSubtype | read-only | current | The type of port identifier encoding used in the associated 'lldpLocPortId' object. |
| 1.3.111.2.802.1.1.13.1.3.7.1.3 | ColumnlldpV2LocPortId | read-only | current | The string value used to identify the port component associated with a given port in the local system. |
| 1.3.111.2.802.1.1.13.1.3.7.1.4 | ColumnlldpV2LocPortDesc | read-only | current | The string value used to identify the IEEE 802 LAN station's port description associated with the local system. If the local agent supports IETF RFC 2863, lldp… |
| 1.3.111.2.802.1.1.13.1.3.8 | TablelldpV2LocManAddrTable | not-accessible | current | This table contains management address information on the local system known to this agent. |
| 1.3.111.2.802.1.1.13.1.3.8.1 | RowlldpV2LocManAddrEntry | not-accessible | current | Management address information about a particular chassis component. There may be multiple management addresses configured on the system identified by a partic… |
| 1.3.111.2.802.1.1.13.1.3.8.1.1 | ColumnlldpV2LocManAddrSubtype | not-accessible | current | The type of management address identifier encoding used in the associated 'lldpLocManagmentAddr' object. It should be noted that only a subset of the possible … |
| 1.3.111.2.802.1.1.13.1.3.8.1.2 | ColumnlldpV2LocManAddr | not-accessible | current | The string value used to identify the management address component associated with the local system. The purpose of this address is to contact the management e… |
| 1.3.111.2.802.1.1.13.1.3.8.1.3 | ColumnlldpV2LocManAddrLen | read-only | current | The total length of the management address subtype and the management address fields in LLDPDUs transmitted by the local LLDP agent. The management address len… |
| 1.3.111.2.802.1.1.13.1.3.8.1.4 | ColumnlldpV2LocManAddrIfSubtype | read-only | current | The enumeration value that identifies the interface numbering method used for defining the interface number (lldpV2LocManAddrIfId), associated with the local s… |
| 1.3.111.2.802.1.1.13.1.3.8.1.5 | ColumnlldpV2LocManAddrIfId | read-only | current | The integer value used to identify the interface number regarding the management address component associated with the local system. |
| 1.3.111.2.802.1.1.13.1.3.8.1.6 | ColumnlldpV2LocManAddrOID | read-only | current | The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the local system agent. |
| 1.3.111.2.802.1.1.13.1.4 | NodelldpV2RemoteSystemsData | |||
| 1.3.111.2.802.1.1.13.1.4.1 | TablelldpV2RemTable | not-accessible | current | This table contains one or more rows per physical network connection known to this agent. The agent may wish to ensure that only one lldpRemEntry is present fo… |
| 1.3.111.2.802.1.1.13.1.4.1.1 | RowlldpV2RemEntry | not-accessible | current | Information about a particular physical network connection. Entries may be created and deleted in this table by the agent, if a physical topology discovery pro… |
| 1.3.111.2.802.1.1.13.1.4.1.1.1 | ColumnlldpV2RemTimeMark | not-accessible | current | A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 4502 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to … |
| 1.3.111.2.802.1.1.13.1.4.1.1.2 | ColumnlldpV2RemLocalIfIndex | not-accessible | current | The interface index value used to identify the port associated with this entry. Its value is an index into the interfaces MIB The value of this object is used … |
| 1.3.111.2.802.1.1.13.1.4.1.1.3 | ColumnlldpV2RemLocalDestMACAddress | not-accessible | current | The index value used to identify the destination MAC address associated with this entry. Its value identifies the row in the lldpV2DestAddressTable where the M… |
| 1.3.111.2.802.1.1.13.1.4.1.1.4 | ColumnlldpV2RemIndex | not-accessible | current | This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote s… |
| 1.3.111.2.802.1.1.13.1.4.1.1.5 | ColumnlldpV2RemChassisIdSubtype | read-only | current | The type of encoding used to identify the chassis associated with the remote system. |
| 1.3.111.2.802.1.1.13.1.4.1.1.6 | ColumnlldpV2RemChassisId | read-only | current | The string value used to identify the chassis component associated with the remote system. |
| 1.3.111.2.802.1.1.13.1.4.1.1.7 | ColumnlldpV2RemPortIdSubtype | read-only | current | The type of port identifier encoding used in the associated 'lldpRemPortId' object. |
| 1.3.111.2.802.1.1.13.1.4.1.1.8 | ColumnlldpV2RemPortId | read-only | current | The string value used to identify the port component associated with the remote system. |
| 1.3.111.2.802.1.1.13.1.4.1.1.9 | ColumnlldpV2RemPortDesc | read-only | current | The string value used to identify the description of the given port associated with the remote system. |
| 1.3.111.2.802.1.1.13.1.4.1.1.10 | ColumnlldpV2RemSysName | read-only | current | The string value used to identify the system name of the remote system. |
| 1.3.111.2.802.1.1.13.1.4.1.1.11 | ColumnlldpV2RemSysDesc | read-only | current | The string value used to identify the system description of the remote system. |
| 1.3.111.2.802.1.1.13.1.4.1.1.12 | ColumnlldpV2RemSysCapSupported | read-only | current | The bitmap value used to identify which system capabilities are supported on the remote system. |
| 1.3.111.2.802.1.1.13.1.4.1.1.13 | ColumnlldpV2RemSysCapEnabled | read-only | current | The bitmap value used to identify which system capabilities are enabled on the remote system. |
| 1.3.111.2.802.1.1.13.1.4.1.1.14 | ColumnlldpV2RemRemoteChanges | read-only | current | Indicates that there are chances in the remote systems MIB, as determined by the variable remoteChanges. |
| 1.3.111.2.802.1.1.13.1.4.1.1.15 | ColumnlldpV2RemTooManyNeighbors | read-only | current | Indicates that there are too many neighbors as determined by the variable tooManyNeighbors. |
| 1.3.111.2.802.1.1.13.1.4.2 | TablelldpV2RemManAddrTable | not-accessible | current | This table contains one or more rows per management address information on the remote system learned on a particular port contained in the local chassis known … |
| 1.3.111.2.802.1.1.13.1.4.2.1 | RowlldpV2RemManAddrEntry | not-accessible | current | Management address information about a particular chassis component. There may be multiple management addresses configured on the remote system identified by a… |
| 1.3.111.2.802.1.1.13.1.4.2.1.1 | ColumnlldpV2RemManAddrSubtype | not-accessible | current | The type of management address identifier encoding used in the associated 'lldpRemManagmentAddr' object. It should be noted that only a subset of the possible … |
| 1.3.111.2.802.1.1.13.1.4.2.1.2 | ColumnlldpV2RemManAddr | not-accessible | current | The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management … |
| 1.3.111.2.802.1.1.13.1.4.2.1.3 | ColumnlldpV2RemManAddrIfSubtype | read-only | current | The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the remote system. |
| 1.3.111.2.802.1.1.13.1.4.2.1.4 | ColumnlldpV2RemManAddrIfId | read-only | current | The integer value used to identify the interface number regarding the management address component associated with the remote system. The value depends upon th… |
| 1.3.111.2.802.1.1.13.1.4.2.1.5 | ColumnlldpV2RemManAddrOID | read-only | current | The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent. |
| 1.3.111.2.802.1.1.13.1.4.3 | TablelldpV2RemUnknownTLVTable | not-accessible | current | This table contains information about an incoming TLV which is not recognized by the receiving LLDP agent. The TLV may be from a later version of the basic man… |
| 1.3.111.2.802.1.1.13.1.4.3.1 | RowlldpV2RemUnknownTLVEntry | not-accessible | current | Information about an unrecognized TLV received from a physical network connection. Entries may be created and deleted in this table by the agent, if a physical… |
| 1.3.111.2.802.1.1.13.1.4.3.1.1 | ColumnlldpV2RemUnknownTLVType | not-accessible | current | This object represents the value extracted from the type field of the TLV. |
| 1.3.111.2.802.1.1.13.1.4.3.1.2 | ColumnlldpV2RemUnknownTLVInfo | read-only | current | This object represents the value extracted from the value field of the TLV. |
| 1.3.111.2.802.1.1.13.1.4.4 | TablelldpV2RemOrgDefInfoTable | not-accessible | current | This table contains one or more rows per physical network connection which advertises the organizationally defined information. Note that this table contains o… |
| 1.3.111.2.802.1.1.13.1.4.4.1 | RowlldpV2RemOrgDefInfoEntry | not-accessible | current | Information about the unrecognized organizationally defined information advertised by the remote system. The lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex… |
| 1.3.111.2.802.1.1.13.1.4.4.1.1 | ColumnlldpV2RemOrgDefInfoOUI | not-accessible | current | The Organizationally Unique Identifier (OUI), as defined in IEEE Std 802, is a 24 bit (three octets) globally unique assigned number referenced by various stan… |
| 1.3.111.2.802.1.1.13.1.4.4.1.2 | ColumnlldpV2RemOrgDefInfoSubtype | not-accessible | current | The integer value used to identify the subtype of the organizationally defined information received from the remote system. The subtype value is required to id… |
| 1.3.111.2.802.1.1.13.1.4.4.1.3 | ColumnlldpV2RemOrgDefInfoIndex | not-accessible | current | This object represents an arbitrary local integer value used by this agent to identify a particular unrecognized organizationally defined information instance,… |
| 1.3.111.2.802.1.1.13.1.4.4.1.4 | ColumnlldpV2RemOrgDefInfo | read-only | current | The string value used to identify the organizationally defined information of the remote system. The encoding for this object should be as defined for SnmpAdmi… |
| 1.3.111.2.802.1.1.13.1.5 | NodelldpV2Extensions | |||
| 1.3.111.2.802.1.1.13.2 | NodelldpV2Conformance | |||
| 1.3.111.2.802.1.1.13.2.1 | NodelldpV2Compliances | |||
| 1.3.111.2.802.1.1.13.2.1.1 | CompliancelldpV2TxRxCompliance | current | A compliance statement for all SNMP entities that implement the LLDP MIB as either a transmitter or a receiver of LLDPDUs. This version defines compliance requ… | |
| 1.3.111.2.802.1.1.13.2.1.2 | CompliancelldpV2TxCompliance | current | A compliance statement for SNMP entities that implement the LLDP MIB and have the capability of transmitting LLDP frames. This version defines compliance requi… | |
| 1.3.111.2.802.1.1.13.2.1.3 | CompliancelldpV2RxCompliance | current | The compliance statement for SNMP entities that implement the LLDP MIB. This version defines compliance requirements for V2 of the LLDP MIB module. | |
| 1.3.111.2.802.1.1.13.2.2 | NodelldpV2Groups | |||
| 1.3.111.2.802.1.1.13.2.2.1 | GrouplldpV2ConfigGroup | current | The collection of objects which are used to configure the LLDP implementation behavior. | |
| 1.3.111.2.802.1.1.13.2.2.2 | GrouplldpV2ConfigRxGroup | current | The collection of objects which are used to configure the LLDP implementation behavior. | |
| 1.3.111.2.802.1.1.13.2.2.3 | GrouplldpV2ConfigTxGroup | current | The collection of objects which are used to configure the LLDP implementation behavior. | |
| 1.3.111.2.802.1.1.13.2.2.4 | GrouplldpV2StatsRxGroup | current | The collection of objects which are used to represent LLDP reception statistics. | |
| 1.3.111.2.802.1.1.13.2.2.5 | GrouplldpV2StatsTxGroup | current | The collection of objects which are used to represent LLDP transmission statistics. | |
| 1.3.111.2.802.1.1.13.2.2.6 | GrouplldpV2LocSysGroup | current | The collection of objects which are used to represent LLDP Local System Information. | |
| 1.3.111.2.802.1.1.13.2.2.7 | GrouplldpV2RemSysGroup | current | The collection of objects which are used to represent LLDP Remote Systems Information. The objects represent the information associated with the basic TLV set.… | |
| 1.3.111.2.802.1.1.13.2.2.8 | GrouplldpV2NotificationsGroup | current | The collection of notifications used to indicate LLDP MIB data consistency and general status information. |