LOOPBACK-DETECT-MIB
24 objects
The structure of loopback detection management for the proprietary enterprise.
Imported Objects
| DLINK-ID-REC-MIB | dlink-common-mgmt |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.41 | IdentityswLoopDetectMIB | The structure of loopback detection management for the proprietary enterprise. | ||
| 1.3.6.1.4.1.171.12.41.1 | NodeswLoopDetectCtrl | |||
| 1.3.6.1.4.1.171.12.41.1.1 | ScalarswLoopDetectAdminState | read-write | current | This object indicates the loopback detection status for the system. |
| 1.3.6.1.4.1.171.12.41.1.2 | ScalarswLoopDetectInterval | read-write | current | This object indicates the interval value. The range is from 1 to 32767 seconds. |
| 1.3.6.1.4.1.171.12.41.1.3 | ScalarswLoopDetectRecoverTime | read-write | current | This object indicates the recover time. The range is from 60 to 1000000. The value of 0 disables the recover function. |
| 1.3.6.1.4.1.171.12.41.1.4 | ScalarswLoopDetectMode | read-write | current | This object indicates the loopback detection mode for the system. |
| 1.3.6.1.4.1.171.12.41.1.5 | ScalarswLoopDetectTrapMode | read-write | current | This object indicates the loopback detection trap mode for the system. |
| 1.3.6.1.4.1.171.12.41.1.6 | ScalarswLoopDetectLogState | read-write | current | This object indicates the LBD log state. |
| 1.3.6.1.4.1.171.12.41.2 | NodeswLoopDetectInfo | |||
| 1.3.6.1.4.1.171.12.41.3 | NodeswLoopDetectPortMgmt | |||
| 1.3.6.1.4.1.171.12.41.3.1 | TableswLoopDetectPortTable | not-accessible | current | The table specifies the loopback detection function specified by port. |
| 1.3.6.1.4.1.171.12.41.3.1.1 | RowswLoopDetectPortEntry | not-accessible | current | The table specifies the loopback detection function specified by port. |
| 1.3.6.1.4.1.171.12.41.3.1.1.1 | ColumnswLoopDetectPortIndex | read-only | current | This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module |
| 1.3.6.1.4.1.171.12.41.3.1.1.2 | ColumnswLoopDetectPortState | read-write | current | This object indicates the loopback detection function state on the port. |
| 1.3.6.1.4.1.171.12.41.3.1.1.3 | ColumnswLoopDetectPortLoopVLAN | read-only | current | This object indicates the VLAN list that has detected a loopback. |
| 1.3.6.1.4.1.171.12.41.3.1.1.4 | ColumnswLoopDetectPortLoopStatus | read-only | current | This object indicates the port status. |
| 1.3.6.1.4.1.171.12.41.10 | NodeswLoopDetectNotify | |||
| 1.3.6.1.4.1.171.12.41.10.0 | NodeswLoopDetectNotifyPrefix | |||
| 1.3.6.1.4.1.171.12.41.10.0.1 | NotificationswPortLoopOccurred | current | The trap is sent when a port loop occurs. | |
| 1.3.6.1.4.1.171.12.41.10.0.2 | NotificationswPortLoopRestart | current | The trap is sent when a port loop restarts after the interval time. | |
| 1.3.6.1.4.1.171.12.41.10.0.3 | NotificationswVlanLoopOccurred | current | The trap is sent when a Port with a VID loop occurs. | |
| 1.3.6.1.4.1.171.12.41.10.0.4 | NotificationswVlanLoopRestart | current | The trap is sent when a Port with a VID loop restarts after the interval time. | |
| 1.3.6.1.4.1.171.12.41.10.1 | NodeswLoopDetectNotificationBidings | |||
| 1.3.6.1.4.1.171.12.41.10.1.1 | ScalarswVlanLoopDetectVID | accessible-for-notify | current | This object indicates the VID that has detected a loopback. |